OptiX RTN 600 Configuration ²Using the T2000 and T2000 Web LCT
www.huawei.com
Foreword
Huawei provides NE-level, subnet-level and network-level
management systems for the RTN 600 series products.
This course describes the NE-level N E-level management system OptiX
iManager T2000 Web LCT and the subnet-level management managem ent system OptiX iManager T2000.
Foreword
Huawei provides NE-level, subnet-level and network-level
management systems for the RTN 600 series products.
This course describes the NE-level N E-level management system OptiX
iManager T2000 Web LCT and the subnet-level management managem ent system OptiX iManager T2000.
Reference
Digital Microwave Communication principles
OptiX iManager T2000 Management System Solution V2.31
OptiX iManager T2000 Web LCT Installation Guide and User Guide
Objectives Upon completion of this course, you will be able to:
Describe the functions of the T2000 and the T2000 Web LCT.
Install the T2000 Web LCT.
Configure services and protection by using the T2000 and the T2000 Web LCT.
Contents 1. Introduction
to Networks
Management Systems 2. Introduction to T2000 Web LCT 3. Introduction to the T2000
Comprehensive Management System Solution Integrated
OSS or integrated NMS
NMS & OSS
Service management layer
CORBA
CORBA
iManager T2100
MML
iManager T2000
iManager T2100 MML
CORBA
Network management layer
MML
iManager T2000
iManager T2000
iManager T2000 LCT
Qx
Qx
Qx
Qx
NE management layer NE layer
Introduction to Management Systems The orientation of each management system is as follows:
iManager T2000 LCT
iManager T2000
The iManager T2000 (T2000 for short) is a subnet management system (SNMS) for transport networks. The T2000 manages the full series of Huawei OptiX products. The T2000 supports all functions of the NE layer and some of the network layer management functions.
iManager T2100
The T2000 local craft terminal (LCT) realizes the local maintenance and equipment turn-up of Huawei OptiX products.
The iManager T2100 (T2100 for short) is a network-level management system that uniformly manages the full series of Huawei OptiX products. It manages large-scale optical transport networks in a uniform manner.
iManager MDS
The iManager MDS (MDS for short) is a business-level management system for transport networks. It assists users to plan and simulate an optical transport network.
Introduction to Management Systems
Platforms
running
where the management systems are
Contents 1. Introduction to Management Systems 2. Introduction to the T2000 Web LCT
3. Introduction to the T2000
Contents
Introduction
to the T2000
Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
T2000 Web LCT ± Main Characteristics The characteristics of the T2000 W eb LCT are as follows:
Web-based solution
Per-NE configuration and maintenance
Access to a local NE through a LAN/RS 232
Access to a remote NE through DCC
Management of NEs of various types
Concurrent login to a maximum of 32 NEs
Integration with the T2000, T2100 or thirdparty management system
T2000 Web LCT ± Function The T2000 Web LCT provides the following NE-layer management functions:
Service configuration (including PDH and SDH microwave services)
Protection configuration (intermediate frequency protection, SNCP, LMSP)
Setting and query of the intermediate frequency attributes
Setting and query of the radio frequency attributes
Data services (the 10M/100M fast Ethernet transparent transmissi on board EFT4 is supported)
Setting and viewing of alarms and performance data
Communication and security
Contents Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
T2000 Web LCT ± Application Scenario Stand-alone
The equipment maintenance personnel installs the T2000 Web LCT on a PC.
The equipment maintenance personnel manages local or remote NEs by using the T2000 Web LCT.
T2000 Web LCT ± Application Scenario Integrated
The personnel at the network operations center install the EMS or NMS on a PC .
Install
the T2000 Web LCT as a part of the EMS . The NMS need not be installed .
The personnel at the network operations center starts the T2000 Web LCT by using the EMS or NMS client .
NMS
DCN EMS
NE network
EMS
NE network
Contents
Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
T2000 Web LCT ± Installation Guide Pre-installation
Configuration requirements
The T2000 Web LCT runs on the Windows operating system.
Hardware requirements
CPU: Pentium III 700 MHz or higher
RAM: 256 MB (recommended 512 MB or higher)
Monitor: 1024 x 768 resolution
Serial port: RS 232
Ethernet port: 10M/100M
T2000 Web LCT ± Installation Guide Pre-installation (continued)
Software requirements
Windows XP Professional SP2/Windows 2003 Server Standard SP1
Internet Explorer 6.0 or better
Tomcat 5.0
JDK1.4.2
Servlet 2.3
T2000 Web LCT ± Installation Guide
Prerequisite: Windows XP Professional SP2 or Windows 2003 Server standard SP1 must be installed .
Procedure
Step 1 Uncompress the installation package or Insert the installation CDROM, and run the setup .exe file. Click Next.
T2000 Web LCT ± Installation Guide
Step 2 Select I accept the terms of the license agreement and click Next.
T2000 Web LCT ± Installation Guide
Step 3 Enter your user name, company name, and serial number Click Next.
T2000 Web LCT ± Installation Guide
Step 4 Click Next.
T2000 Web LCT ± Installation Guide
Step 5 Click Install and the Setup Status dialog box is displayed. After the T2000 Web LCT is installed, the Installation Complete dialog box is displayed.
T2000 Web LCT ± Installation Guide
Step 6 Click Finish.
T2000 Web LCT ± Installation Guide Checking the Installation After you install the T2000
Web LCT, you need to check the
correctness of installation. Check directories and files as follows:
The T2000 Web LCT installation directory.
The installation directory of the jre software.
By default is C:\Web_LCT\jre.
The installation directory of the Tomcat software.
By default is C:\Web_LCT.
By default is C:\Web_LCT\Tomcat .
Check the shortcut icon on desktop. The iManager T2000 W eb LCT group is created in the Windows Program bar.
Contents
Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
T2000 Web LCT ± Connecting to NEs
To use the T2000 Web LCT to configure and manage NEs, you need to connect the T2000 Web LCT to NEs with an Ethernet cable or a serial port.
Procedure
By using a network cable 1. Connect a network cable to the computer where the T2000 Web LCT resides. 2. Route the network cable to the equipment side and connect the RJ-45 connector of the network cable to the network management interface on the front panel of the equipment.
T2000 Web LCT ± Connecting to NEs
Procedure (continued)
By using DCN 1. Use a network cable to connect the computer where the T2000 Web LCT resides to the DCN. 2. Connect one end of another network cable to the network management interface on the front panel of the equipment. Connect another end to the DCN.
By using an RS 232 serial port cable 1. Connect the serial port cable to the computer where the T2000 Web LCT resides. 2. Route the serial port cable to the equipment side. Connect the RS 232 connector of the serial port cable to the RS 232 interface on the front panel of the equipment.
Contents
Introduction to the T2000 Web LCT
2.1 Main Characteristics
2.2 Application Scenario
2.3 Installation Guide
2.4 Connecting to NEs
2.5 Configuration Operations
Contents
Configuration Operations
2.5.1 Logging In to an NE
2.5.2 Modifying the NE ID
2.5.3 Configuring IF Protection
2.5.4 Setting IF Attributes
2.5.5 Setting RF Attributes
2.5.7 Configuring Service
2.5.7 Configuring SNCP Service
2.5.8 Converting service
2.5.9 Alarm
2.5.10 Performance
2.5.11 Communications and Security
Web LCT Configuration ± Logging In to an NE Step1 Double-click the T2000 Web LCT shortcut icon on the desktop to launch the T2000 Web LCT. Step2 The User Login screen is displayed. Enter the user name and password. Click Login.
Web LCT Configuration ± Logging In to an NE Step3 Create an NE in one of the following two ways. 1. Click NE Search and specify the search criteria. Select the NE to be added to create a new NE.
Web LCT Configuration ± Logging In to an NE 2. Create an NE directly. Click the ³Add NE´ and Enter the information of the NE and create the NE.
Web LCT Configuration ± Logging In to an NE
Step 4: In the NE List, select the target NE and click NE Login.Then, the IE displays the NE Login dialog box.
Step 5:Enter the User Name and the Password. Then, click OK.
Web LCT Configuration ± Modifying the NE ID Step 1 In the NE Explorer, choose Configuration > NE Attribute from the Function Tree. Click Modify NE ID.
Web LCT Configuration ± Modifying the NE ID Step 2 Enter a new ID and click OK.
Web LCT Configuration ± Modifying the NE ID Step 3 In the NE list, delete the original NE. Create a new NE with the new ID.
Web LCT Configuration ± Configuring IF Protection
The supported IF protection is 1+1 HSB, 1+1 SD, and 1+1 FD. Create IF protection
Step 1 In the NE Explorer, choose Configuration > IF 1+1 Protection from the Function Tree.
Web LCT Configuration ± Configuring IF Protection Step 2 Click New and enter the information of the IF protection. Click OK or Apply.
Web LCT Configuration ± Configuring IF Protection
Perform IF protection external switching. The priorities of ex ternal switching commands are as follows: clear, lockout, force, and manual.
Web LCT Configuration ± Setting IF Attributes
You can set the following IF attributes by using the T2000 Web LCT: working mode, link ID, IF port loopback, 2 Mbit/s wayside service, and ATPC-related information. In the NE Explorer, select an IF board and choose IF Interface from the Function Tree.
Web LCT Configuration ± Setting IF Attributes You can enable automatic transmit power control (ATPC), and adjust the threshold and the ATPC adjustment.
Web LCT Configuration ± Setting RF Attributes
By using the T2000 Web LCT, you can query and configure the following RF attributes: transmit frequency, T/R spacing, transmitted power, ODU manufacturer information, RF loopback status, and ODU status. Frequency attributes
Web LCT Configuration ± Setting RF Attributes Power attributes
Web LCT Configuration ± Setting RF Attributes ODU manufacturer information
Web LCT Configuration ± Setting RF Attributes In the Advanced Attributes tab, you set RF loopback and ODU status.
Web LCT Configuration ± Configuring a Service
This operation is applicable to VC4, VC3, and VC12 services.
Procedure Step 1 In the NE Explorer, Configuration -> Cross-Connection Configuration from the Function Tree.
Web LCT Configuration ± Configuring a Service
Web LCT Configuration ± Configuring a Service Step 2 Click New, enter the information of a service and click OK or Apply.
Web LCT Configuration ± Configuring an SNCP Service
This operation is applicable to VC12, VC3, and VC4 SNCP services.
Procedure Step 1 In the Cross-Connection Configuration window, click Create SNCP. Enter the information of an SNCP service.
Web LCT Configuration ± Configuring an SNCP Service Step 2 After you create an SNCP service, the window is divided into two panes. The upper pane displays the working service and the lower pane displays the protection service. You can perform external switching for the working and protection services.
Web LCT Configuration ± Converting a Service
The T2000 Web LCT supports the conversion between a normal service and an SNCP service.
To convert a normal service to an SNCP service, select a normal service, right-click and choose Convert to SNCP from the shortcut menu. Enter the source of the service in the protection channel and click OK.
Web LCT Configuration ± Converting a Service
You can convert the working or protection channel of an SNCP service to a normal service.
To convert a working channel, right-click the service in the working channel and choose SNCP Working Service Change to Normal Service from the shortcut menu.
Web LCT Configuration ± Converting a Service
To convert a protection channel, right-click the service in the protection channel and choose SNCP Protection Service Change to Normal Service from the shortcut menu.
Web LCT Configuration ± Alarm
By using the T2000 Web LCT, you can view the current and history alarms, the reporting status of alarms for an NE and boards, and abnormal events.
Web LCT Configuration ± Performance The T2000 Web LCT supports 15-minute and 24-hour performance monitoring intervals.
Web LCT Configuration ± Performance
You can view the current and history performance data, UAT events, threshold crossings, and performance monitoring status. You can set the performance threshold and reset a board registry.
Web LCT Configuration ± Communications
The RTN 600 uses the OSP NE platform.
You can set multiple protocol stacks, including the OSI, IP, and HWECC.
Web LCT Configuration ± Communications
For DCC management, an IF board supports the configuration of different DCC rates in different working modes.
When the working mode is PDH, the configuration of one-byte DCC (D1-D1) rate is supported. When the working mode is SDH, the configuration of D1-D3, D4-D12, D1-D12, and D1-D1 is supported.
Contents 1. Introduction
to Management Systems
2. Introduction to T2000 Web LCT 3. Introduction to T2000
Contents
Introduction to T2000
3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
T2000 Main Characteristics
The T2000 consists of server and client.
The server is developed based on C++ and the client is based on Java.
The T2000 manages a maximum of 1000 equivalent NEs and supports concurrent operations of 32 clients. T2000 server
T2000 client
T2000 client
T2000 Main Characteristics
Modular architecture
Open and integrated
High efficiency and reliability
Contents
Introduction to T2000
3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
T2000 Application Scenario
Subnet management system (SNMS) Applicable to small and medium network management
Provides power NE management functions
Uniformly manage the RTN/SDH/ASON/MSTP/WDM equipment
Provides the standard northbound interfaces and supports OSS integration
iManager T2000
Contents
Introduction to T2000
3.1 Main Characteristics
3.2 Application Scenario
3.3 Configuration Operations
Contents
Configuration Operations
3.3.1 Microwave link
3.3.2 Alarm
3.3.3 Performance
3.3. 4 Linear MSP
T2000 Configuration ± Creating a Microwave Link
The T2000 allows you to create a Microwave link. You can view the networking on the Main Topology. Step 1 On the Main Topology, right-click and choose Microwave link from the shortcut menu. Enter the information of the Microwave link.
T2000 Configuration ± Creating a Microwave Link
Alternatively, click the icon on the toolbar to display the Create Link window.
T2000 Configuration ± Creating a Microwave Link Step 2 Click OK or Apply. The link is displayed as follows:
T2000 Configuration ±Creating a Microwave Link
When the source and the sink have different working modes, the link status is abnormal.
Current Alarm Statistics
An NE reports current alarms to the T2000. You can filter alarms according to the report time of alarms. You can view alarm statistics in each NE.
Customizing Alarm Attributes
You can customize c ustomize alarm functions, f unctions, such as alarm severity, alarm suppression, and alarm reporting.
The T2000 supports a maximum of 16 alarm templates. templates .
Alarm Correlation Analysis and Suppression A number of NE N E alarms
Alarm analysis rule
Root alarm
Characteristics:
Suppress nonroot alarms
Retain the root alarms.
Suppress the non-root alarms.
Customize the analysis rules.
Customizing Performance Threshold The T2000 supports customization of a maximum of 16 performance thresholds.
History Performance Analysis
The T2000 provides graphic history performance data analysis.
T2000 Configuration
The T2000 and T2000 Web LCT are the same in terms of service configuration, IF protection, IF and RF attributes, and communications. Refer to the description in the T2000 Web LCT part.
