The project RTO MANAGEMENT SYSTEM is proposed to install a system that shall enable the proposed RTO SYSTEM interface with the existing system with maximum accuracy .This project is very use…Full description
RTO
Discussion Forum
online music store project report
This is a project report on Online Quiz System.
Full description
Full reportFull description
report of online shopping
Full description
Full description
Full description
Recovery Point Objective (RPO) and Recovery Time Objective (RTO)Descripción completa
Full description
Full description
It is online system where users can add tests which can be taken by students.
this is the online library system's project report..
this is the online library system's project report..Full description
Online Admission System Project Report
Full description
A report on online shopping system.Full description
1
Introduction
“E-Regional Transport Office Management System” is a web application that has been designed to automate the process of registration of vehicle and issuing driving license process. System can make the daily activities efficient and providing the fast response to store and retrieve information.
The project E-REGIONAL TRANSPORT OFFICE MANAGEMENT SYSTEM is proposed to install a system that shall enable the proposed RTO SYSTEM interface with the existing system with maximum accuracy .This project is very useful for those who are concern with the different processes on RTO. As a total manpower based system is currently running for the whole procedures, designing a new system which makes the whole process online, demands a deep knowledge about the existing system. The purpose of our RTO management system is to provide a leading technological tool for the ease of RTO functions such as Registration, Learners License, online license test and Complaint Registration etc. It will reduce considerably the difficulties faced on existing system, with minimum error and difficulties.
2
Objective
The purpose of our E-Regional Transport Office management system is to provide a leading online technological tool for the ease of RTO functions such as Registration, license test, Learners License etc .It will reduce considerably the difficulties faced on existing system, with minimum error and difficulties. The main features included are as follows: Registration of vehicle through online.
Fancy number selection of vehicles through online.
Issue of information’s about license, which include application forms, demo of leaner’s license test and other information’s.
Provide mail alerts for users about license expiry.
Complaint registration.
3
System Analysis
DRAWBACK OF CURRENT SYSTEM Existing system is very complex, waste of time & many more
Real-life problem.
Many employees are needed to handle current system.
It is more expensive process.
Immediate responses to the queries are difficult.
Lots of times are consumed for each report generation.
So, require to build new Website according to RTO office so that all the people can get information about the e-RTO.
Proposed System
The proposed system is aimed to automate the major processes in the Regional Transport Office.
Features of Proposed System
Proposed system is an online system: so any persons can browse the site and download & upload the application form.
Less time consuming.
Highly secure in data storing.
4
Can avoid intermediate persons & institutions.
Helpful in traffic issues: authorized users can trace the vehicle in the accident cases using their register number.
It is more users friendly: the sections such as, registration, license etc are combined together in a single window.
Demo questions of learner’s license test will help the users in their license test.
Users can have knowledge about the new rules and regulations from the information’s & awareness section.
In the online system the repetition of work & duplication of data can be avoided
By introducing the new system we have been organized some striking facilities:
Registration of vehicle through online. Fancy number selection of vehicles through online. Issue of information’s about license, which include application forms, demo of leaner’s license test and other information’s. Provide mail alerts for users about license expiry. Complaint registration.
Feasibility Study
Feasibility study is the detailed study expanded from the result of initial investigation. This is done by investigating the existing system in the area under investigation or generally ideas about a new system. It is the test of a system 5
proposal according to its work ability, impact on organization, ability to meet user needs and effective use of resources. Objective of feasibility study is to acquire a sense of the scope of the problem. It is carried out to select the best system that meets performance requirements.
Feasibility analysis involves the following steps:
Form a project and appoint a project leader
Prepare system flowcharts
Weigh system performance
Prepare and report final project directive to management
There are three key considerations involved in feasibility analysis namely: Economic feasibility Technical feasibility Operational feasibility Economic Feasibility:
Economic feasibility is used to determine the benefits and savings expected from the candidate system and to compare them with costs incurred. If benefits outweigh cost, then decision will be to design and implement system. Otherwise, alterations will have to be made to the proposed system. The proposed system is economically feasible. Technical Feasibility: Technical feasibility centers on existing system and to what extent it can support proposed modifications. It involves financial enhancement. This evaluation determines whether the technology needed for the proposed system is available or not. This is concerned with specifying satisfy the user requirements. The technical needs of the system may include front-end and backend-selection.
6
An important issue for the development of a project is the selection of suitable front-end and back-end. Based on some aspects, we select the most suitable platform that suits the needs of the organization. Operational Feasibility:
The present system is easily understandable. The users are presented with friendly user interface that helps them to understand the flow of the system more easily. Maximum transparency has been provided. The new system is very much user friendly and operational cost is bearable. The maintenance and working of the new system needs less human efforts. The proposed project is beneficial to the organizational and is user friendly.
7
PERT Chart
Collect
Start
Survey Report
Information
Format Design
Meet end user
Meet manager
Integrate all these
Visit Office Coding of Project
Finish
8
Visit In
GANTT Chart A Gantt chart is a horizontal bar chart developed as a production control tool in 1917 by Henry L. Gantt, an American engineer and social scientist. A Gantt chart provides a graphical illustration of a schedule that helps to plan, coordinate and track specific tasks in a project.
ACTIVITY
11/0818/08
18/0925/09
1/1022/10
23/1113/12
Project Search Finalization& Allocation Investigation of system requirement System Design Program design Program coding System integration Acceptance test
9
11/011/02
14/o2-10/03
12/0325/03
Software Development Life Cycle
There are a large number of software models used for guiding the software development process. Normally every software model contains almost
same
life
cycle
except
there
are
some
difference
process
techniques. In this software we have used the linear sequential model because it is easiest one to implement and we have to follow the straightforward
techniques
for
developing
the
software.
There
are
following steps we have hone through in the complete process. ANALYSIS:-In this step we have gathered the different requirement to
develop the software, to understand the nature of the program to be build and all the requirement for both the system and the users has been identified. DESIGN:- Software design is actually a group of process that a group of
that focuses on
four distinct attribute of
a program- data structure,
software architecture, interface representation and procedural detail the design process translates requirements into a representation of the software that can be accessed for quality before coding begins. Like requirements the design is documented becomes part of the software configuration CODE GENERATION:- The design must be translated into a machine
readable from to develop the software. The code generation step performs this task. If design is performed in a detail manner, this code generation can accomplish EASILY. TESTING:- Once code has been generated the program testing begins.
The testing begins. The testing process focuses on the logical internals of
10
the software, ensuring that all statement have been tested and on the functional externals, that is conducting tests to uncover errors and ensure that defined input will produce actual result that agree with required result. SUPPORT
(MAINTENANCE):-
Software
will
undoubtedly
undergo
change after it is delivered to customer change will occur because errors have
been
encountered
because
the
software
must
be
adapted
to
accommodate change in its external environment or because the customer requires
function
or
performance
enhancement.
Software
support/maintenance reapplies each of the preceding phases to an existing program weather than a new one.
11
SOFTWARE REQUIREMENT SPECIFICATION
PURPOSE:
“E-Regional Transport Office Management System” is a web application that has been designed to automate the process of registration of vehicle and issuing driving license process. System can make the daily activities efficient and providing the fast response to store and retrieve information.
The project E-REGIONAL TRANSPORT OFFICE MANAGEMENT SYSTEM is proposed to install a system that shall enable the proposed RTO SYSTEM interface with the existing system with maximum accuracy .This project is very useful for those who are concern with the different processes on RTO. As a total manpower based system is currently running for the whole procedures, designing a new system which makes the whole process online, demands a deep knowledge about the existing system.
The purpose of our RTO management system is to provide a leading technological tool for the ease of RTO functions such as Registration, Learners License, online license test and Complaint Registration etc. It will reduce considerably the difficulties faced on existing system, with minimum error and difficulties.
12
HARDWARE AND SOFTWARE REQUIREMENTS HARDWARE CONFIGURATION 1.
Processor
Pentium IV with 3.0 GHz.
2.
RAM
512MB
3.
HDD
40GB
4. Monitor
15” Color monitor with 16 million colors
5.
Pointing device
Two - button Mouse or 3-button Mouse.
6.
Keyboard
104 Keys
SOFTWARE CONFIGURATION 1. 2. 3. 4. 5.
Microsoft .Net framework 4.0. Microsoft ASP.Net. AJAX Tool kit. Microsoft C#.Net language. Microsoft SQL Server 2008
13
Description of Technology Used in Project.
INTRODUCTION TO .NET Framework
The .NET Framework is a new computing platform that simplifies application development in the highly distributed environment of the Internet. The .NET Framework is designed to fulfill the following objectives:
To provide a consistent object-oriented programming environment whether object code is stored and executed locally, executed locally but Internetdistributed, or executed remotely.
To provide a code-execution environment that minimizes software deployment and versioning conflicts.
To provide a code-execution environment that guarantees safe execution of code, including code created by an unknown or semi-trusted third party.
To provide a code-execution environment that eliminates the performance problems of scripted or interpreted environments.
To make the developer experience consistent across widely varying types of applications,
such
as
Windows-based
applications
and
Web-based
applications. To build all communication on industry standards to ensure that code based on the .NET Framework can integrate with any other code.
The .NET Framework has two main components: the common language runtime and the .NET Framework class library. The common language runtime is the foundation of the .NET Framework. You can think of the runtime as an agent that manages code at execution time, providing core services such as memory management, thread management, and Remoting, while also enforcing strict 14
type safety and other forms of code accuracy that ensure security and robustness. In fact, the concept of code management is a fundamental principle of the runtime. Code that targets the runtime is known as managed code, while code that does not target the runtime is known as unmanaged code. The class library, the other main component of the .NET Framework, is a comprehensive, object-oriented collection of reusable types that you can use to develop applications ranging from traditional command-line or graphical user interface (GUI) applications to applications based on the latest innovations provided by ASP.NET, such as Web Forms and XML Web services. The .NET Framework can be hosted by unmanaged components that load the common language runtime into their processes and initiate the execution of managed code, thereby creating a software environment that can exploit both managed and unmanaged features. The .NET Framework not only provides several runtime hosts, but also supports the development of third-party runtime hosts.
For example, ASP.NET hosts the runtime to provide a scalable, serverside environment for managed code. ASP.NET works directly with the runtime to enable Web Forms applications and XML Web services, both of which are discussed later in this topic. Internet Explorer is an example of an unmanaged application that hosts the runtime (in the form of a MIME type extension). Using Internet Explorer to host the runtime enables you to embed managed components or Windows Forms controls in HTML documents. Hosting the runtime in this way makes managed mobile code (similar to Microsoft® ActiveX® controls) possible, but with
15
significant improvements that only managed code can offer, such as semitrusted execution and secure isolated file storage.
The following illustration shows the relationship of the common language runtime and the class library to your applications and to the overall system. The illustration also shows how managed code operates within a larger architecture. FEATURES OF THE COMMON LANGUAGE RUNTIME
The common language runtime manages memory, thread execution, code execution, code safety verification, compilation, and other system services. These features are intrinsic to the managed code that runs on the common language runtime. With regards to security, managed components are awarded varying degrees of trust, depending on a number of factors that include their srcin (such as the Internet, enterprise network, or local computer). This means that a managed component might or might not be able to perform file-access operations, registry-access operations, or other sensitive functions, even if it is being used in the same active application. The runtime enforces code access security. For example, users can trust that an executable embedded in a Web page can play an animation on screen or sing a song, but cannot access their personal data, file system, or network. The security features of the runtime thus enable legitimate Internet-deployed software to be exceptionally featuring rich. The runtime also enforces code robustness by implementing a strict typeand code-verification infrastructure called the common type system (CTS). The
16
CTS ensures that all managed code is self-describing. The various Microsoft and third-party language compilers Generate managed code that conforms to the CTS. This means that managed code can consume other managed types and instances, while strictly enforcing type fidelity and type safety. In addition, the managed environment of the runtime eliminates many common software issues. For example, the runtime automatically handles object layout and manages references to objects, releasing them when they are no longer being used. This automatic memory management resolves the two most common application errors, memory leaks and invalid memory references. The runtime also accelerates developer productivity. For example, programmers can write applications in their development language of choice, yet take full advantage of the runtime, the class library, and components written in other languages by other developers. Any compiler vendor who chooses to target the runtime can do so. Language compilers that target the .NET Framework make the features of the .NET Framework available to existing code written in that language, greatly easing the migration process for existing applications. While the runtime is designed for the software of the future, it also supports software of today and yesterday. Interoperability between managed and unmanaged code enables developers to continue to use necessary COM components and DLLs. The runtime is designed to enhance performance. Although the common language runtime provides many standard runtime services, managed code is never interpreted. A feature called just-in-time (JIT) compiling enables all managed code to run in the native machine language of the system on which it is 17
executing. Meanwhile, the memory manager removes the possibilities of fragmented memory and increases memory locality-of-reference to further increase performance. Finally, the runtime can be hosted by high-performance, server-side applications, such as Microsoft® SQL Server™ and Internet Information Services (IIS). This infrastructure enables you to use managed code to write your business logic, while still enjoying the superior performance of the industry's best enterprise servers that support runtime hosting. .NET FRAMEWORK CLASS LIBRARY
The .NET Framework class library is a collection of reusable types that tightly integrate with the common language runtime. The class library is object oriented, providing types from which your own managed code can derive functionality. This not only makes the .NET Framework types easy to use, but also reduces the time associated with learning new features of the .NET Framework. In addition, third-party components can integrate seamlessly with classes in the .NET Framework. For example, the .NET Framework collection classes implement a set of interfaces that you can use to develop your own collection classes. Your collection classes will blend seamlessly with the classes in the .NET Framework. As you would expect from an object-oriented class library, the .NET Framework types enable you to accomplish a range of common programming tasks, including tasks such as string management, data collection, database connectivity, and file access. In addition to these common tasks, the class library includes types that support a variety of specialized development scenarios. For
18
example, you can use the .NET Framework to develop the following types of applications and services:
Console applications.
Scripted or hosted applications.
Windows GUI applications (Windows Forms). ASP.NET applications.
XML Web services.
Windows services. For example, the Windows Forms classes are a comprehensive set of
reusable types that vastly simplify Windows GUI development. If you write an ASP.NET Web Form application, you can use the Web Forms classes.
ASP.NET Server Application Development
Server-side applications in the managed world are implemented through runtime hosts. Unmanaged applications host the common language runtime, which allows your custom managed code to control the behavior of the server. This model provides you with all the features of the common language runtime and class library while gaining the performance and scalability of the host server. The following illustration shows a basic network schema with managed code running in different server environments. Servers such as IIS and SQL Server can perform standard operations while your application logic executes through the managed code.
19
SERVER-SIDE MANAGED CODE
ASP.NET is the hosting environment that enables developers to use the .NET Framework to target Web-based applications. However, ASP.NET is more than just a runtime host; it is a complete architecture for developing Web sites and Internet-distributed objects using managed code. Both Web Forms and XML Web services use IIS and ASP.NET as the publishing mechanism for applications, and both have a collection of supporting classes in the .NET Framework. XML Web services, an important evolution in Web-based technology, are distributed, server-side application components similar to common Web sites. However, unlike Web-based applications, XML Web services components have no UI and are not targeted for browsers such as Internet Explorer and Netscape Navigator. Instead, XML Web services consist of reusable software components designed to be consumed by other applications, such as traditional client applications, Web-based applications, or even other XML Web services. As a result, XML Web services technology is rapidly moving application development and deployment into the highly distributed environment of the Internet. If you have used earlier versions of ASP technology, you will immediately notice the improvements that ASP.NET and Web Forms offers. For example, you can develop Web Forms pages in any language that supports the .NET Framework. In addition, your code no longer needs to share the same file with your HTTP text (although it can continue to do so if you prefer). Web Forms pages execute in native machine language because, like any other managed application, they take full advantage of the runtime. In contrast, unmanaged ASP pages are always scripted and interpreted. ASP.NET pages are 20
faster, more functional, and easier to develop than unmanaged ASP pages because they interact with the runtime like any managed application. The .NET Framework also provides a collection of classes and tools to aid in development and consumption of XML Web services applications. XML Web services are built on standards such as SOAP (a remote procedure-call protocol), XML (an extensible data format), and WSDL ( the Web Services Description Language). The .NET Framework is built on these standards to promote interoperability with non-Microsoft solutions. For example, the Web Services Description Language tool included with the .NET Framework SDK can query an XML Web service published on the Web, parse its WSDL description, and produce C# or Visual Basic source code that your application can use to become a client of the XML Web service. The source code can create classes derived from classes in the class library that handle all the underlying communication using SOAP and XML parsing. Although you can use the class library to consume XML Web services directly, the Web Services Description Language tool and the other tools contained in the SDK facilitate your development efforts with the .NET Framework. If you develop and publish your own XML Web service, the .NET Framework provides a set of classes that conform to all the underlying communication standards, such as SOAP, WSDL, and XML. Using those classes enables you to focus on the logic of your service, without concerning yourself with the communications infrastructure required by distributed software development. Finally, like Web Forms pages in the managed environment, your XML Web service will run with the speed of native machine language using the scalable communication of IIS.
21
ACTIVE SERVER PAGES.NET
ASP.NET is a programming framework built on the common language runtime that can be used on a server to build powerful Web applications. ASP.NET offers several important advantages over previous Web development models:
Enhanced Performance. ASP.NET is compiled common language runtime
code running on the server. Unlike its interpreted predecessors, ASP.NET can take advantage of early binding, just-in-time compilation, native optimization, and caching services right out of the box. This amounts to dramatically better performance before you ever write a line of code.
World-Class Tool Support. The ASP.NET framework is complemented by
a rich toolbox and designer in the Visual Studio integrated development environment. WYSIWYG editing, drag-and-drop server controls, and automatic deployment are just a few of the features this powerful tool provides.
Power and Flexibility. Because ASP.NET is based on the common language
runtime, the power and flexibility of that entire platform is available to Web application developers. The .NET Framework class library, Messaging, and Data Access solutions are all seamlessly accessible from the Web. ASP.NET is also language-independent, so you can choose the language that best applies to your application or partition your application across many languages. Further, common language runtime interoperability guarantees
22
that your existing investment in COM-based development is preserved when migrating to ASP.NET.
Simplicity. ASP.NET makes it easy to perform common tasks, from simple
form submission and client authentication to deployment and site configuration. For example, the ASP.NET page framework allows you to build user interfaces that cleanly separate application logic from presentation code and to handle events in a simple, Visual Basic - like forms processing model. Additionally, the common language runtime simplifies development, with managed code services such as automatic reference counting and garbage collection.
Manageability. ASP.NET employs a text-based, hierarchical configuration
system, which simplifies applying settings to your server environment and Web applications. Because configuration information is stored as plain text, new settings may be applied without the aid of local administration tools. This "zero local administration" philosophy extends to deploying ASP.NET Framework applications as well. An ASP.NET Framework application is deployed to a server simply by copying the necessary files to the server. No server restart is required, even to deploy or replace running compiled code.
Scalability and Availability. ASP.NET has been designed with scalability in
mind, with features specifically tailored to improve performance in clustered and multiprocessor environments. Further, processes are closely monitored and managed by the ASP.NET runtime, so that if one misbehaves (leaks, 23
deadlocks), a new process can be created in its place, which helps keep your application constantly available to handle requests
Customizability and Extensibility. ASP.NET delivers a well-factored
architecture that allows developers to "plug-in" their code at the appropriate level. In fact, it is possible to extend or replace any subcomponent of the ASP.NET runtime with your own custom-written component. Implementing custom authentication or state services has never been easier.
Security. With built in Windows authentication and per-application
configuration, you can be assured that your applications are secure.
SQL SERVER
A database management, or DBMS, gives the user access to their data and helps them transform the data into information. Such database management systems include dBase, paradox, IMS, SQL Server and SQL Server. These systems allow users to create, update and extract information from their database. A database is a structured collection of data.
Data refers to the
characteristics of people, things and events. SQL Server stores each data item in its own fields. In SQL Server, the fields relating to a particular person, thing or event are bundled together to form a single complete unit of data, called a record (it can also be referred to as raw or an occurrence). Each record is made up of a number of fields. No two fields in a record can have the same field name.
24
During an SQL Server Database design project, the analysis of your business needs identifies all the fields or attributes of interest. If your business needs change over time, you define any additional fields or change the definition of existing fields. SQL SERVER TABLES
SQL Server stores records relating to each other in a table. Different tables are created for the various groups of information. Related tables are grouped together to form a database. PRIMARY KEY
Every table in SQL Server has a field or a combination of fields that uniquely identifies each record in the table. The Unique identifier is called the Primary Key, or simply the Key. The primary key provides the means to distinguish one record from all other in a table. It allows the user and the database system to identify, locate and refer to one particular record in the database. RELATIONAL DATABASE
Sometimes all the information of interest to a business operation can be stored in one table. SQL Server makes it very easy to link the data in multiple tables. Matching an employee to the department in which they work is one example. This is what makes SQL Server a relational database management system, or RDBMS. It stores data in two or more tables and enables you to define relationships between the table and enables you to define relationships between the tables.
25
FOREIGN KEY
When a field is one table matches the primary key of another field is referred to as a foreign key. A foreign key is a field or a group of fields in one table whose values match those of the primary key of another table. REFERENTIAL INTEGRITY
Not only does SQL Server allow you to link multiple tables, it also maintains consistency between them.
Ensuring that the data among related
tables is correctly matched is referred to as maintaining referential integrity.
26
Data Flow Diagram A data flow diagram is graphical tool used to describe and analyze movement of data through a system. These are the central tool and the basis from which the other components are developed. The transformation of data from input to output, through processed, may be described logically and independently of physical components associated with the system. These are known as the logical data flow diagrams. The physical data flow diagrams show the actual implements and movement of data between people, departments and workstations. A full description of a system actually consists of a set of data flow diagrams. Using two familiar notations Yourdon, Gane and Sarson notation develops the data flow diagrams. Each component in a DFD is labeled with a descriptive name. Process is further identified with a number that will be used for identification purpose. The development of DFD’S is done in several levels. Each process in lower level diagrams can be broken down into a more detailed DFD in the next level. The lop-level diagram is often called context diagram. It consists a single process bit, which plays vital role in studying the current system. The process in the context level diagram is exploded into other process at the first level DFD. The idea behind the explosion of a process into more process is that understanding at one level of detail is exploded into greater detail at the next level. This is done until further explosion is necessary and an adequate amount of detail is described for analyst to understand the process.
27
Larry Constantine first developed the DFD as a way of expressing system requirements in a graphical from, this lead to the modular design. A DFD is also known as a “bubble Chart” has the purpose of clarifying system requirements and identifying major transformations that will become programs in system design. So it is the starting point of the design to the lowest level of detail. A DFD consists of a series of bubbles joined by data flows in the system.
DFD SYMBOLS:
In the DFD, there are four symbols
1. A square defines a source(srcinator) or destination of system data.
2. An arrow identifies data flow. information flows
It is the pipeline through which the
3. A circle or a bubble represents a process that transforms incoming data flow into outgoing data flows.
4. An open rectangle is a data store, data at rest or a temporary repository of data
Process that transforms data flow.
28
Source or Destination of data
Data flow
Data Store
CONSTRUCTING A DFD:
Several rules of thumb are used in drawing DFD’S:
1. Process should be named and numbered for an easy reference. Each name should be representative of the process.
2. The direction of flow is from top to bottom and from left to right. Data traditionally flow from source to the destination although they may flow back to the source. One way to indicate this is to draw long flow line back to a source. An alternative way is to repeat the source symbol as a destination. Since it is used more than once in the DFD it is marked with a short diagonal.
3. When a process is exploded into lower level details, they are numbered.
29
4. The names of data stores and destinations are written in capital letters. Process and dataflow names have the first letter of each work capitalized
30
Context Diagram
31
1-level DFD for Admin
32
1-level DFD for user
33
ER Diagram
34
System Design INPUT DESIGN
Input design is the process of converting a user-oriented description of the inputs to a computer based business system into a programmer-oriented specification. Inaccurate input data is the most common cause of processing errors. Effective input design minimizes errors made by data entry operators. The input design is the link that ties information system into the world of its users. Input design consists of developing specific procedures for data preparations, steps necessary to put the transaction data in the form that is usable for computer processing. The data entry operator need to know the space allocated for each field, the field sequence which must match with the source document and the format in which the data is entered. This project “E-Regional Transport Office Management System” has got several inputs taken from the user. They are:
Details of vehicles and license holders.
Complaints by the user.
The system is provided with C# pages for the user to input above details. Only the administrator and registered user are able to upload data. So their details are the major inputs to the system.
35
OUTPUT DESIGN
Outputs form computer systems are required primarily to communicate the processing to the end users. The output of the system designed in such a way that it provides, opportunities, problem or warnings, trigger an action and confirm an action. The user-friendly interfaces provide a clear output to the system. The output of this software system is a website. This system consists of online vehicle registration, fancy number selection, information about License and complaint registration. In this system the output that can be viewed by the end user is the website. It provides an opportunity to get public awareness, online registration for vehicles, selection of fancy number, license application form downloading and uploading, and complaint registration, automatic e mail for the registered user about license renewal etc. Module design:
Software design sits at the technical kernel of the software engineering process and is applied regardless of the development paradigm and area of application. Design is the first step in the development phase for any engineered product or system. The designer’s goal is to produce a model or representation of an entity that will later be built. Beginning, once system requirement have been specified and analyzed, system design is the first of the three technical activities -design, code and test that is required to build and verify software.
36
The importance can be stated with a single word “Quality”. Design is the place where quality is fostered in software development. Design provides us with representations of software that can assess for quality. Design is the only way that we can accurately translate a customer’s view into a finished software product or system. Software design serves as a foundation for all the software engineering steps that follow. Without a strong design we risk building an unstable system – one that will be difficult to test, one whose quality cannot be assessed until the last stage. During design, progressive refinement of data structure, program structure, and procedural details are developed reviewed and documented. System design can be viewed from either technical or project management perspective. From the technical point of view, design is comprised of four activities – architectural design, data structure design, interface design and procedural design. MODULES Modules of Project are as Follows: 1) User Management 2) 3) 4) 5)
It includes management of different users. User can register themselves, Change their password etc. There are two different Categories of Users: 37
1. Administrator 2. User
Administrator can do the following function
Update the act and rules. Manage the user information. Send the acknowledgement to user. Cancel the user registration. Manage the user account. Update the news. Issue the license. Renew the license.
User can do the following function
Register their information and create account. Select Demo test And Give That test. See the demo test result at the time. See The Information regarding RTO. See the act and Rules Updated by admin. Apply for License, Renewal of License.
2) Learning License
Learning license module includes the learners registration .It also includes the online license test. 3) Permanent License
This module includes permanent license registration. It also provides Renewal License feature. And also provides facility for Duplicate License. 38
4) Vehicle Registration
This module includes new registration of vehicles and Getting Duplicate Registration. 5) Reports
Corresponding to each operation report generation in PDF format will be available for future reference.
39
DATABASE DESIGN Tables
Table Name : Login Column Name
Username Password status
Column Data Type Descriptio n Name of Varchar the user
Width/Size
Constraints
30
Primary key
password Status
30 32
Varchar Int
Table. Name : QuestionBank Column Name Qid
Question Choice1 Choice2 Choice3 Rightanswer
Column Description Id of the question Question
Choice Choice Choice Answer
Data Type
Width/Size
Constraints
Int
32
Primary key
Varchar Varchar Varchar Varchar int
Max 50 50 50 32
Data Type
Width/Size
Constraints
25 25
Primary key
Table Name: SignUp Column Name username
Name
Column Description username
Varchar Name of the user Varchar 40
Sex Dob mobile
Sex Date of birth Mobile no
Varchar Varchar Varchar
7 12 15
Table Name: Download Column Name id
Column Description Id of the download
Data Type
Width
Constraints
int
32
Primary key
Name
Name of download Category of download First Name Status of download Date of download
varchar
50
varchar
50
varchar int
50 32
varchar
50
Category Fname Status dte
Table Name: FileUpload Column Name
Column Description
Data Type
Width
Constraints
id Userid Category Filename Status dte
Id of the file Id of the user Category of file Name of the file status date
int Varchar Varchar Varchar int Varchar
32 50 50 50 32 50
Primary key Foreign key
41
Table Name: License Column Name Id
Column Description Id of licence
Authority
Name of authority Name of the user Sex Permanent address Communicati on address Date of birth
Name Sex Paddress Caddress Dob Edu_qual Mobileno Dte Id_mark Blood Email Expdate Status
Educational qualification Contact no Date Identification mark Blood group E mail address Licence expiry date status
Data Type
Width
Constraints
Int Varchar
32 50
Primary key
Varchar
25
Varchar Varchar
7 max
Varchar
max
Varchar
12
Varchar
max
Varchar Varchar Varchar
15 50 max
Varchar Varchar
8 50
Varchar
50
int
32
Table Name: License photo Column Name id
Column Description Id of license holder
Data Type
int
42
Width/Si ze 32
Constraints
Primary key
Licenseno Filename
License number Name of the file
varchar varchar
50 50
Table Name: VehicleReg Column Name Id
Column Description Id of the vehicle
Data Type
Int
Width/Siz e 32
Name Age
Name of user Age of the user Permanent address Communicati on address Name of dealer Class of the vehicle Type of body Name of vehicle Name of
Varchar Int
25 32
Varchar
max
Varchar
Max
Varchar
50
Varchar
50
Varchar Varchar
50 50
Varchar
50
Varchar
50
Varchar Varchar
50 50
Varchar
50
Paddress Caddress Dealer class Body Vehicle Manuname Dateofmanu
Hp Chassisno Engno Capacity
manufacturer Date of manufacturin g Horse power Chassis number Engine number Capacity
Float 43
Constraints
Primary key
Fuel Colour Length
Width Height Regno
Fuel type Colour of vehicle Length of vehicle
Varchar Varchar
Width of vehicle Height of vehicle Registration number
Float
50 50
Float
Float Varchar
Table Name: Fancy Number Column
Column
Data
Width
Constraints
Name id
Description Id of the fancy number
Type int
32
Primary key
Fancynumber
Fancy number status
varchar
50
int
32
status
Table Name: Info Column Name
id info
Column Descriptio n Informatio n id
Data Type
Width/Siz e
Constraints
int
32
Primary key
informatio n
varchar
Max
44
Table Name: Mail Column Name id
Column Description Mail id
From1 To1
Name of sender Name of recipient Subject of mail Contents of the mail date status
subject body dte status
Data Type
Width Constraints
int varchar varchar
32 20 20
varchar varchar
25 max
varchar int
30
Data Type
Width Constraints
int varchar varchar
32 25 30
varchar
30
varchar
max
varchar varchar varchar int
15 15 25 32
Primary key
Table Name: OfficialReg Column Name id
Column Description Registration id
name designatio n departmen t address
Name of official Designation
Department name Address of official ContactNo Contact number mobile Mobile number Username Name of the user status status
45
Primary key
Coding Adminlogin.aspx.cs
using System; using using System.Collections; System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient;
public partial class _Default : System.Web.UI.Page { SqlConnection conn = new SqlConnection(); SqlCommand cmd = new SqlCommand(); string str = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = "";
using System; using System.Collections; using System.Configuration; using System.Data; 47
using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient; public partial class Default2 : System.Web.UI.Page { SqlConnection conn = new SqlConnection(); SqlCommand cmd = new SqlCommand(); string str = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = ""; string temp; string photo; protected void Page_Load(object sender, EventArgs e) { conn = new SqlConnection(str); } protected void Button1_Click(object sender, EventArgs e) {
if (FileUpload1.HasFile) { FileUpload1.SaveAs(Server.MapPath("~/Document/" + FileUpload1.FileName)); 48
using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Drawing; using System.Data.SqlClient; //using RTO.DT; public partial class _Default : System.Web.UI.Page { string strCn = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = ""; SqlConnection conn; 50
SqlDataAdapter dap; DataTable dt; int q_n = 0;
protected void Page_Load(object sender, EventArgs e) { conn = new SqlConnection(strCn); if (!IsPostBack) { sql = "SELECT TOP (15) q_id, q_name, opt_1, opt_2, opt_3, ans, image FROM rto ORDER BY NEWID()"; dap = new SqlDataAdapter(sql, strCn); dt = new DataTable(); dap.Fill(dt); gv1.DataSource = dt; gv1.DataBind(); lbl_no_of_que.Text = "0"; Show_Que(); } else { chk_ans(); Show_Que(); }
using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; public partial class Test_Result : System.Web.UI.Page { int m = 0; protected void Page_Load(object sender, EventArgs e) { if (Request.QueryString["marks"] != null) 62
{ m = int.Parse(Request.QueryString["marks"].ToString()); if (m >= 11) { Image1.ImageUrl = "~/images/winner.png"; Label1.Text = "You got "+ m + " Marks out of 15, You are PASS..."; } else { Image1.ImageUrl = "~/images/loser.png"; Label1.Text = "You got " + m + " Marks out of 15, You are FAIL..."; } } else { Response.Redirect("~/RTO Test.aspx"); } } protected void Button1_Click(object sender, EventArgs e) { Response.Redirect("~/Default.aspx"); } } Userlogin.aspx.cs
using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; 63
using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq;
using System.Data.SqlClient; public partial class _Default : System.Web.UI.Page { SqlConnection conn = new SqlConnection(); SqlCommand cmd = new SqlCommand(); string str = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = ""; int Reg_id; protected void Page_Load(object sender, EventArgs e) { conn = new SqlConnection(str); } protected void Button1_Click(object sender, EventArgs e) { sql = "select Reg_id from Registration where Username = '" + TextBox1.Text + "' and Password ='" + TextBox2.Text + "' "; //Label1.Text = sql; cmd = new SqlCommand(sql, conn); conn.Open(); object c = cmd.ExecuteScalar(); conn.Close();
if (c != null) 64
{ int reg_id = Int32.Parse(c.ToString()); Session["user"] = TextBox1.Text; Session["reg_id"] = Reg_id.ToString(); Response.Redirect("~/user/home1.aspx"); } else { Label1.Text = "wrong user or password..."; }
using System; using System.Data; using System.Configuration; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient;
65
using RTO.DT; public class BT_rto { private int q_id; private string q_name; private string opt_1; private string opt_2; private string opt_3; private string ans; private string image; DT_rto dt_rt = new DT_rto(); public int Q_id { get { return q_id; } set { try { q_id = value; if (this.q_id.ToString() == "") { throw new Exception("Please q_Id ..."); } } catch (Exception e) { throw new Exception(e.Message.ToString()); } } 66
} public string Q_name { get { return q_name; } set { try { q_name = value; if (this.q_name.ToString() == "") { throw new Exception("Please q_name ..."); } } catch (Exception e) { throw new Exception(e.Message.ToString()); } } } public string Opt_1 { get { return opt_1; } set { try { opt_1 = value; if (this.opt_1.ToString() == "") 67
} } } public string Opt_2 { get { return opt_2; } set { try { opt_2 = value; if (this.opt_2.ToString() == "") { throw new Exception("Please opt_2..."); } } catch (Exception e) { throw new Exception(e.Message.ToString()); } } } public string Opt_3 { get 68
{ return opt_3; } set { try { opt_3 = value; if (this.opt_3.ToString() == "") { throw new Exception("Please opt_3 ..."); } } catch (Exception e) { throw new Exception(e.Message.ToString()); } } } public string Ans { get { return ans; } set { try { ans= value; if (this.ans.ToString() == "") { throw new Exception("Please ans..."); } } 69
catch (Exception e) { throw new Exception(e.Message.ToString()); } } } public string Image { get { return image; } set { try { image = value; if (this.image.ToString() == "") { throw new Exception("Please image..."); } } catch (Exception e) { throw new Exception(e.Message.ToString()); } } } ///////////////////////////////////////////// public int Insert_Data(BT_rto rt1) { int i = dt_rt.insert_data(rt1); return i; } ///////////////////////////////////////////// 70
public int Update_Data(BT_rto rt1) { int i = dt_rt.update_data(rt1); return i; } ///////////////////////////////////////////// public int Delete_Data(BT_rto rt1) { int i = dt_rt.delete_data(rt1); return i; } ///////////////////////////////////////////// public DataTable Select_Data() { DataTable dt = dt_rt.select_data(); return dt; } ///////////////////////////////////////////// public DataTable Select_Data(string q) { DataTable dt = dt_rt.select_data(q); return dt; } } DTrto.cs
using System; using System.Data; using System.Configuration; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; 71
using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; /////////////////////////////// using System.Data.SqlClient; using RTO.DT; namespace RTO.DT { public class DT_rto { SqlConnection conn; SqlCommand cmd; SqlDataAdapter dap; string strcn = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = "";
public DT_rto() { conn = new SqlConnection(strcn); } public int insert_data(BT_rto rt1) { sql = "insert into rto(q_name,opt_1,opt_2,opt_3,ans,image)values('" + rt1.Q_name + "','" + rt1.Opt_1 + "','" + rt1.Opt_2 + "','" + rt1.Opt_3 + "','" + rt1.Ans + "','" + rt1.Image + "')"; cmd = new SqlCommand(sql, conn);
conn.Open(); 72
int i = cmd.ExecuteNonQuery(); conn.Close(); return i; } public int update_data(BT_rto rt1) { sql = "update rto set q_name='" + rt1.Q_name + "',opt_1='" + rt1.Opt_1 + "',opt_2='" + rt1.Opt_2 + "',opt_3='" + rt1.Opt_3 + "',ans='" + rt1.Ans + "',image='" + rt1.Image + "'where q_id=" + rt1.Q_id; cmd = new SqlCommand(sql, conn); conn.Open(); int i = cmd.ExecuteNonQuery(); conn.Close(); return i; } public int delete_data(BT_rto rt1) { sql = "delete from rto where q_id = " + rt1.Q_id; cmd = new SqlCommand(sql, conn); conn.Open(); int i = cmd.ExecuteNonQuery(); conn.Close(); return i; } public DataTable select_data() { DataTable dt = new DataTable(); sql = "select * from rto"; dap = new SqlDataAdapter(sql, strcn); dap.Fill(dt); return dt; 73
} public DataTable select_data(string q) { DataTable dt = new DataTable(); sql = q; dap = new SqlDataAdapter(sql, strcn); dap.Fill(dt); return dt; } } } Myclass.cs
using System; using System.Data; using System.Configuration; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient;
/// /// Summary description for MyClass /// public class MyClass {
74
string CnStr = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; SqlConnection conn; SqlCommand cmd; SqlDataAdapter dap; public MyClass() { conn = new SqlConnection(CnStr); } public int Execute(string sql) { cmd = new SqlCommand(sql, conn); conn.Open(); int i=cmd.ExecuteNonQuery(); conn.Close(); return i; } public object scalar(string sql) { cmd = new SqlCommand(sql, conn); conn.Open(); object i = cmd.ExecuteScalar(); conn.Close(); return i; } public int get_newId(string TBL,string PK) {
object c = scalar(sql); int i = 0; if (c != null && c.ToString() != "") { i = int.Parse(c.ToString()); } i = i + 1; return i; } public DataTable Get_TABLE(string sql) { dap = new SqlDataAdapter(sql, conn); DataTable dt = new DataTable(); dap.Fill(dt); return dt; } } Adminforget.aspx.cs using System; using System.Collections; using System.Configuration; using System.Data;
using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient;
76
public partial class Default2 : System.Web.UI.Page { SqlConnection conn = new SqlConnection(); SqlCommand cmd = new SqlCommand(); string str = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;User Instance=True"; string sql = ""; protected void Page_Load(object sender, EventArgs e) { conn = new SqlConnection(str); } protected void Button1_Click(object sender, EventArgs e) { string username = TextBox1.Text; string answer = TextBox2.Text; sql = "select Password from Admin_Master where Username = '" + username + "' and sec_ans ='" + answer + "' "; cmd = new SqlCommand(sql, conn); conn.Open(); object c = cmd.ExecuteScalar(); if (c != null && c.ToString() != "") { Label1.Text = "Your Answer is : " + c.ToString(); } else { Label1.Text = "wrong Username Or Password"; }
using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient; 83
sql = "select * from Result "; dap = new SqlDataAdapter(sql, conn); DataTable dt = new DataTable(); dap.Fill(dt); GridView1.DataSource = dt; GridView1.DataBind();
} protected void Button1_Click(object sender, EventArgs e) { string fld = DropDownList1.SelectedValue.ToString(); string txt = TextBox1.Text; sql = "select * from Result where " + fld + " like '" + txt + "%' "; dap = new SqlDataAdapter(sql, conn); DataTable dt = new DataTable(); dap.Fill(dt); GridView1.DataSource = dt; GridView1.DataBind();
84
} protected void Button2_Click(object sender, EventArgs e) { Response.Redirect("~/admin/Entry_Result.aspx"); } } Registrationlist.aspx.cs using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Data.SqlClient; public partial class admin_Default2 : System.Web.UI.Page { http://localhost:1370/Online Erto/admin/List Registration.aspx.cs SqlConnection conn; SqlDataAdapter dap; string str = @"Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Database.mdf;Inte grated Security=True;Connect Timeout=30;User Instance=True"; string sql = ""; protected void Page_Load(object sender, EventArgs e) { conn = new SqlConnection(str);
sql = "select * from Registration"; 85
dap = new SqlDataAdapter(sql, conn); DataTable dt = new DataTable(); dap.Fill(dt); GridView1.DataSource = dt; GridView1.DataBind(); } protected void Button1_Click(object sender, EventArgs e) { string fld = DropDownList1.SelectedValue.ToString(); string txt = TextBox1.Text; sql = "select * from Registration where " + fld + " like '" + txt + "%' "; dap = new SqlDataAdapter(sql, conn); DataTable dt = new DataTable(); dap.Fill(dt); GridView1.DataSource = dt; GridView1.DataBind();
Reusability: Reusability is possible as and when we require in this application.
We can update it next version. Reusable software reduces design, coding and testing cost by amortizing effort over several designs. Reducing the amount of code also simplifies understanding, which increases the likelihood that the code is correct. We follow up both types of reusability: Sharing of newly written code within a project and reuse of previously written code on new projects.
Extensibility:
This software is extended in ways that its srcinal developers may not expect. The following principles enhance extensibility like Hide data structure, avoid traversing multiple links or methods, Avoid case statements on object type and distinguish public and private operations.
Robustness: Its method is robust if it does not fail even if it receives improper
parameters. There are some facilities like Protect against errors, Optimize after the program runs, validating arguments and Avoid predefined limits.
Understandability: A method is understandable if someone other than the creator of
the method can understand the code (as well as the creator after a time lapse). We use the method, which small and coherent helps to accomplish this.
Cost-effectiveness:
99
Its cost is under the budget and make within given time period. It is desirable to aim for a system with a minimum cost subject to the condition that it must satisfy all the requirements. Scope of this document is to put down the requirements, clearly identifying the information needed by the user, the source of the information and outputs expected from the system.
100
Testing Software Testing is a critical element of software quality assurance and represents ultimate of as specification, design and and the codeattendant generation. The increasing the visibility of review software a system element “costs” associated with a software failure are motivating forces for well planned, thorough testing.
Testing Objective:
The following are the testing objectives: -Testing is a process of executing a program with the intent of finding an error. -A good test case is one that has a high probability of finding an as-yetundiscovered error -A successful test is one that uncovers an as yet undiscovered error.
Testability:
Software Testability is simply how easily (a computer program can be tested). The Following characteristics are considered that lead to testable software. -Operability: “The better it works, the more efficiently it can be tested.” -Observability: “What you see is what you test.” -Controllability: “The better we can control the software, the more the Testing can be automated and optimized.”
-Decomposability: “By controlling the scope of testing, we can more quickly Isolate problems and perform smarter retesting. 101
-Simplicity: “The less there is to test, the more quickly we can test it.” -Stability: “The fewer the changes, the fewer the disruptions to testing.” -Understandability: “the more information we have, the smarter we will test.
TEST CASE DESIGN:
The design of testing can be divided into two broad categories:
White Box Testing:
Black box testing:
WHITE BOX TESTING:
White box testing of software is predicated on close examination of procedural detail. Logical paths through the software are tested by providing test cases that exercise Specific sets of conditions and /or loops. The main disadvantage with white box testing is even for smaller programs the number of possible logical paths can be very very large. BLACK BOX TESTING:
Black box testing methods focus on the functional requirements of the software. That is, black box testing enables the software engineer to derive sets of input conditions that will fully exercise all functional requirements for a program. This approach is likely to uncover a different class of errors than white box testing method. Black box testing attempts to find errors in the following categories:
Incorrect or missing functions.
Interface errors 102
Errors in data structures or external database access.
Performance errors, and
Initialization and termination errors.
Unlike white box testing, which is performed early in the testing process, black box
testing
tends
to
be
applied
during
later
design.
Tests are designed to answer the following questions:
How is functional validity tested?
What classes of input will make good test cases?
Is the system particularly sensitive to certain input values?
How are the boundaries of a data class isolated?
What data rates and data volume can the system tolerate?
What effect will specific combinations of data have on system operation?
Functional testing
Early “data flow” analyses often centered on a set of faults that are now known as Define/reference anomalies: • A variable that is defined but never used (referenced) • A variable that is used but never defined • A variable that is defined twice before it is used Each of these anomalies can be recognized from the concordance of a program. Since the concordance information is compiler generated, these anomalies can be discovered by what is known as “static analysis”: finding faults in source code without executing it. A)-UNIT TEST PROCEDURES:
Unit testing is normally considered as an adjunct to the coding step. After source code is developed, reviewed and verified, test cases were established. Functional behavioral were tested for each module. In the present project the following Unit test were conducted. 103
Validation of registered users’ data
Submission of Data in the data File.
Automatic retrieval of data from the File.
Automatic display of options in the front end depending on the option selected by the user.
B)-INTEGRATION TESTING:
Integration testing is a systematic technique for constructing the program structure while at the same time conducting tests to uncover errors associated with interfacing.
C)-VALIDATION TESTING:
Software validation is achieved through a series of black –box tests that demonstrate Conformity with requirements. Validation checks have been performed for all the units/functions described in the Requirements specifications. In the present project the following validations are checked. -Whether the fields such as Number field include characters -Whether the functions such as calculations is done properly or not. -Whether valid and required data is send into the data Files -Under Validation testing two types of test are described. -ALPHA TESTING: The alpha test is conducted at the Administrator site by a client.
-BETA TESTING: Client/Employee.
The
Beta
Test
104
is
conducted
at
one
or
more
D)-SYSTEM TESTING:
System testing fall outside the scope of the software process and are not conducted solely by software engineers. It includes the following: -Recovery testing -Security testing -Stress testing -Performance testing Considering the fact that the present project is not much large to invite System testing, this test has not been performed for the present project. In E-Charity Donation System Project Black box testing is used.
105
System Security Introduction The protection of computer based resources that includes hardware, software, data, procedures and people against unauthorized use or natural
Disaster is known as System Security.
System Security can be divided into four related issues:
Security
Integrity
Privacy
Confidentiality
SYSTEM SECURITY refers to the technical innovations and procedures applied to the hardware and operation systems to protect against deliberate or accidental damage from a defined threat.
DATA SECURITY is the protection of data from loss, disclosure, modification and destruction.
SYSTEM INTEGRITY refers to the power functioning of hardware and programs, appropriate physical security and safety against external threats such as eavesdropping and wiretapping.
PRIVACY defines the rights of the user or organizations to determine what information they are willing to share with or accept from others and how the
106
organization can be protected against unwelcome, unfair or excessive dissemination of information about it.
CONFIDENTIALITY is a special status given to sensitive information in a
database to minimize the possible invasion of privacy. It is an attribute of information that characterizes its need for protection.
SECURITY IN SOFTWARE
System security refers to various validations on data in form of checks and controls to avoid the system from failing. It is always important to ensure that only valid data is entered and only valid operations are performed on the system. The system employees two types of checks and controls:
CLIENT SIDE VALIDATION
Various client side validations are used to ensure on the client side that only valid data is entered. Client side validation saves server time and load to handle invalid data. Some checks imposed are:
ASP.NET Validation Controls are used to ensure those required fields are filled with suitable data only. Maximum lengths of the fields of the forms are appropriately defined. Forms cannot be submitted without filling up the mandatory data so that manual mistakes of submitting empty fields that are mandatory can be sorted out at the client side to save the server time and load.
107
Tab-indexes are set according to the need and taking into account the ease of user while working with the system.
SERVER SIDE VALIDATION
Some checks cannot be applied at client side. Server side checks are necessary to save the system from failing and intimating the user that some invalid operation has been performed or the performed operation is restricted. Some of the server side checks imposed is:
Server side constraint has been imposed to check for the validity of primary key and foreign key. A primary key value cannot be duplicated. Any attempt to duplicate the primary value results into a message intimating the user about those values through the forms using foreign key can be updated only of the existing foreign key values.
User is intimating through appropriate messages about the successful operations or exceptions occurring at server side.
Various Access Control Mechanisms have been built so that one user may not agitate upon another. Access permissions to various types of users are controlled according to the organizational structure. Only permitted users can log on to the system and can have access according to their category. Username, passwords and permissions are controlled o the server side.
108
Implementation System implementation is the stage when the user has thoroughly tested the system and approves all the features provided by the system. The various tests are performed and the system is approved only after all the requirements are met and the user is satisfied. The new system may be totally new; replacing an existing manual or automated system, or it may a major modification to an existing system. In the either case, proper implementation is essential to provide a reliable system to meet organization requirements .successful implementation may not guarantee improvement in the organization using the new system (that is a design question) ,but improper will prevent it. Implementation is the process of having systems personal cheek out and put new equipment to use, train users, install the new application and construct any files of data needed to use it. This phase is less creative than system design. Depending on the size of the organization that will be involve in using the application and the risk involved in its use, system developer may choose to test the operation in only one area of the firm with only one or two persons. Sometimes, they will run both old and new system in parallel way to compare the results. In steel other situations, system developers stop using the old systems one day and start using the new one the next. The implementation of the web based or LAN base network project has some extra steps at the time of implementation. We need to configure the system according the requirement of the software. For the project we need to install IIS Web Server, database server and deployment directory for the project.
109
Aspects of implementation:-
The two aspects of implementation are:
Training Personnel Conversion Procedures Training:-
Even well designed and technically elegant systems can succeed or fail because of the way they are used. Therefore the quality of the training received by the personnel involved with the stem in various ways helps or hinders, and may event prevent, the successful implementation of an information system. Maintenance
Once the software is delivered and deployed, then maintenance phase starts. Software requires maintenance because there are some residual errors remaining in the system that must be removed as they discovered. Maintenance involves understanding the existing software (code and related documents), understanding the effect of change, making the changes, testing the new changes, and retesting the old parts that were not changed. The complexity of the maintenance task makes maintenance the most costly activity in the life of software product. It is believed that almost all software that is developed has residual errors, or bugs, in them. These errors need to be removed when discovered that leads to the software change. This is called Corrective Maintenance. Corrective maintenance means repairing, processing or performance failures or making alterations because of previously ill-defined problems. Software undergoes change frequently even without bugs because the software must be upgraded and enhanced to include more features and provide more services. This also requires modification of the software. The 110
changed software changes the environment, which in turn requires further change. This phenomenon is called the “law of software evaluation”. Maintenance due to this phenomenon is called adaptive maintenance. Adaptive maintenance means changing the program function. Perfect maintenance means enhancing the performance or modifying the programs according to the user’s additional or changing needs. The keys to reduce the need for maintenance are: More accurately defining the user’s requirement during system development.
Preparation of system documentation in a better way. Using more effective ways for designing processing logic and communicating it to project team members.
Making better use of existing tools and techniques.
Managing the system engineering process effectively.
MAINTENANCE TASKS
Corrective Maintenance
Diagnose and fix logic errors
Replace defective network cabling
Restore proper configuration settings
Debug program code
Update drivers
Install software patch
Adaptive Maintenance
Add online capability
Create new reports
Add new data entry field to input screen
Install links to web site
111
Perfective Maintenance
Install additional memory
Write macros to handle repetitive tasks
Compress system files
Optimize user desktop settings
Develop library for code reuse
Install more powerful network server
Preventive Maintenance
Install new antivirus software Develop standard backup schedule
Implement regular defragmentation process
Analyze problem report for patterns
Tighten all cable connections
MAINTENANCE OF THE WEBSITES:
During the design and development of both the websites, special care is taken of the fact that the information will be available all over the world so only authentic and correct information is made available through both the websites. The code written for both the websites is properly documented. The programs have been documented so that any other programmer can modify them easily. Meaningful variable names have been used in each program that makes understanding program logic easier and hence maintenance easy. Moreover while coding the programs the design has been kept modular. Separate modules have been written and integrated.
112
This modular design of the program will also help in pointing out and rectification of faults within the programs. Most important thing about the maintenance of these sites is that they must be continuously updated so that all the time latest and correct information is made available to the people visiting these sites. For that it is necessary that the trade bodies should be contacted constantly and latest data all the companies belonging to them should be taken and the database should be updated. Also the NITP units must be requested continuously to update their data as soon as any change occurs by using this website only so that latest information is always available to the people.
113
Conclusion
In today’s world with the increasing traffic and longer commuting distances it is becoming very difficult for people to travel for their particular licenses issue. Also most of the people today work for longer hours and do not have the flexibility to take a break from work to give the licenses tests. People have not spent more time for licenses test. The People want a facility where they can have easy to issue their licenses. The proposed System has the features for Vehicle registration, issuing of Driving License, Giving online test , renewal of license etc thus making the RTO operations to be performed easily and efficiently.
114
Bibliography Books
SOFTWARE ENGINEERING Roger.S. Pressman
Database System Concepts 4th edition Silberschatz, Korth, Sudarshan
