Nemo Handy-A ? Introd Introducti uction on and Princi Principle ple Use •NEVER SETTLE FOR ANYTHING LESS THAN EXCELLENCE. NEMO NETWORK TESTING SOLUTIONS
Sommaire • Pres Presen enttatio ation n solu soluti tion onss Anit Anitee / Nemo Nemo • Introduci Introducing ng Nemo Handy-A Handy-A • Inst Instal alla lati tion on (sof (softw twar aree and and lice licens nse) e) • Config Configur urati ation on and start starting ing • Pres Presen enttatio ation n of th thee view viewss of th thee to tool ol • features
SOLUT SOLUTION IONSS ANITE ANITE/NE /NEMO MO
Solut Solution ionss Anit Anite/N e/Nemo emo Nemo Walker Walker Air
Nemo Nemo CEM CEM
Nemo Nemo Invex Invex II
Nemo Nemo Qmon Qmon
Nemo Nemo Handy Handy A
Nemo Nemo Outdoor Outdoor
Nemo Nemo FSR FSR1 1
Nemo Analyze Analyze
Nemo Commander
Nemo Walker WalkerAir Air Nemo Autonomo Autonomous us
Nemo Nemo Handy Handy A Autonomous
Nemo Explorer Explorer
Nemo Server Server
Nemo Nemo Qview Qview
NEMO HANDY-A
Nemo Handy-A Concept •
Nemo Handy provides you with smart and discreet solutions for thorough and advanced measurement and optimization of the wireless air interface and mobile application QoS/QoE.
Nemo Walker Air Overview Advantages • • • • • • •
Easy to use : Mobile - flexible - discreet: Measures in transport (bus, train, subway, ...) Indoor measurements (buildings, railway station, airport, shopping center ...) Measures in sensitive areas Measures in areas difficult to reach by car Avoid any connectivity problems encountered in Drive Test
Nemo Ne mo Ha Hand ndyy-A A Features • • • • • • •
Support POLQA and PESQ for voice quality measurement Support PEVQ-S PEVQ-S for measuring video video quality Navigation via OpenStreetMaps real time display of radio KPI Support voice voic e calls, HTTP, HTTP, FTP, FTP, Iperf, HTML, YouTube, YouTube, Facebook, LinkedIn, LinkedIn , Twitter, Twitter, Dropbox, email, emai l, SMS, MMS, ICMP ping tests Support measurements on GSM, WCDMA, HSDPA, HSUPA, HSPA +, LTE / LTE Cat 4 / LTE Cat 6 and WiFi (Hetnet). (Hetnet). Indoor measurements (floorplans)
INSTALLA INSTALLATION TION SW NEMO HANDY-A HANDY-A ? LICENSE MANAGEMENT
Nemo Ne mo Ha Hand ndyy-A A Insta Installa llatio tion n SW Nemo Nemo Handy-A Handy-A Typically, equipment is delivered pre-installed. It may be necessary to update the software of the Nemo Handy-A solution when a new new version version is made avai availabl lablee by Anite Anite / Nemo. To perform this update, two methods can be used: Connect the mobile to PC Download Software Software Nemo Handy-A Handy-A from Nemo User Club Download before any update it is necessary to uninstall the previous version. Before any updated updated software, software, it is recommended recommended to contact the Anite / Nemo Nem o suppo support rt (
[email protected] [email protected])) to check check the compatibil compatibility ity of the new SW with your equipment.
Nemo Ne mo Ha Hand ndyy-A A Insta Installa llatio tion n SW Nemo Nemo Handy-A Handy-A Uninst Uninstall all of Nemo Nemo HandyHandy-A A SW : going to Apps | Settings | More More | Application • Uninstall the old Handy version by going Manager and tapping Uninstall , then press ok to confirm the uninstall uninstall
Nemo Handy-A Installation SW Nemo Handy-A Chargement du Software via un PC
• • • • •
Connect the USB cable to the Nemo Handy mobile and to the computer where you have the Nemo Handy installation files If the terminal does not appear in the list of removable devices in Windows Explorer, perform the following settings: On the device, press the icon (1) Enter the code * # 7284 # or * # 0808 # (2) depending on the model USB Setting (3): USB -> AP USB Settings -> MTP + ADB and confirm with OK and Reboot
(1)
(2)
(3)
Nemo Handy-A Installation SW Nemo Handy-A Loading Software via a PC
In Windows Explorer, access the device memory
•
Go to the "Nemo" directory and copy the installation file (* .apk)
•
Once copying is finished, disconnect the device from the PC
Nemo Handy-A Installation SW Handy-A Loading Software from Nemo User Club (via Internet) Prerequisites: User account Nemo Club
Via the browser terminal, connect to the following web address: http://www.nemotechnologies.com/index.php
•
Go to the Login section and fill in your username and password
Nemo Handy-A Installation SW Nemo Handy-A Loading Software from Nemo User Club (via Internet)
•
Click on Handy-A Version X . apk
Nemo Handy-A Installation SW Nemo Handy-A Software Installation • The software is then downloaded into the terminal • Go to the directory My Files / Download and launch the application • Confirm with Next and Install • Once installation is complete, validate Open
Nemo Nemo Handy-A Installation SW Nemo Handy-A Software Installation
At startup, Nemo Handy-A request access Superuser • Click on "Remember choice forever" and confirm by Allow • Then Nemo Handy-A request to validate the license • After charging the license, the Start page appears and the tool requires a device reboot •
Nemo Handy-A License Management •
During a software update, new features are available.
•
Some options are provided standard with the new software, others may be paying options (eg Voice Quality Measurement).
The license update is OTA (Over The Air) directly from the app Nemo Handy-A • The device connects via the mobile network (3G / LTE) or via Wi-Fi Nemo license server. •
•
The server transfer the new license to your device.
Nemo Handy-A License Management Update License
In the application Nemo Handy-A, click then go to About • Go to the LICENSE tab and Browse Licenses • Click Installed License then confirm Load •
Version of Nemo Handy-A Version of Android Nemo ID/version
Contents of the current license
Content of the license to load
Nemo Handy Configuration The Nemo Handy application opens on the Status view
Screenshot
Menu
Curent measurements
Nemo Handy Configuration Handy Menu
The button actions: •
provides access to following
Forcing To block the terminal on a frequency band, a system, a
channel •
Enable / Disable WiFi To enable / disable WiFi
•
Setting… Handy settings
•
Help Access to documentation
•
About Access to device information (SW version, licence, …)
•
Exit To stop the application
Nemo Handy Configuration Handy Settings… / Settings / General
Backlight
Option defines the brightness of the backlight.
Answer incoming calls
Enable / disable automatic response during incoming call
Call answer dela y
Option allows you to define the delay in milliseconds before answering an incoming call.
Use dialer for calls
Option allows using the inbuilt Android phone dialer. The Dialer enables sending DTMF tones and using for example a Bluetooth headset to hear the audio while performing voice call testing with Handy.
Active WiFi scanning
activates/deactivates WiFi scanning
Enable MMS testin g
option enables MMS testing
Send crash reports
if selected Handy will send crash reports
Phone number
defines the phone number of the Nemo Handy-A terminal
Import/export settings
option enables importing and exporting settings
Screenshot format
Defines in which format (.pgn or .jpg) the captured screenshot will be saved.
Screenshot timestamp
if selected, leaves a timestamp on the captured screenshot
Screenshot all views
If selected, captures a screenshot of all views
Use old YouTube
If selected, enables using old YouTube testin g
Automated testing
Option activates/deactivates the automated testing feature
Nemo Walker Air Configuration Slave Settings… / Settings / Logins To activate the login to the various Social media tools. It is essential to activate the login before beginning tests of social media
Nemo Handy Configuration Handy Settings… / Settings / Display
Display config file
Allows customization of views
Units
define the measurement system used
Show serving info
Displays or not information for the serving cell on all views
Notification volume
Adjusts the volume of event notifications
Notifications
Active types of notifications (sound or visual)
WCDMA/LTE signaling messages
Sets what protocol messages 3G / LTE will be displayed
Nemo Handy Configuration Handy Settings… / Settings / Display / Notifications
Best RSCP Low
Active set received signal code power under -95
Best Ec/N0
Active set Ec/N0 under -15
Tx Power High
TX power over 14
BLER High
Block error rate downlink over 5
Rx Lev Low
RX level under -95
Rx Qual Bad
RX quality over 4
C/I Low
C/I under 12
Percentage of downlink power up commands over 60
Percentage of downlink power up commands over 60
UL Power Up High
Percentage of uplink power up commands over 60
Nemo Handy Configuration Handy Settings… / Settings / Display / Notifications change of state No ti fi ca ti on / ev en ts o n s tat e
D ef au lt
Cell ID Canged Channel Changed LAC Changed System Changed
GPS Status Notification/Evènement sur GPS
GPS Fix Acquired GPS Fix Lost GPS Disconnected GPS Connected
In case of change of value
Nemo Handy Configuration Handy Settings… / Settings / Display / Notifications Events/ Services Notification/Event Voice
FTP/HTTP
FTP/HTTP
Voice Call Attempt
Connection Attempt
Transfer Attempt
Voice Call Connected
Connection Success
Transfer Success
Voice Call Failed
Cnnection Failed
Transfer Failed
Voice Call Disconneted
Connection Disconnected
Voice Call Dropped
Connection Dropped
•Note that it is possible to edit the notification by choosing threshold of triggering •To edit a notification, click the button on the side of each notification
Nemo Walker Air Configuration Slave Settings… / Settings / Logging L og fi le pr efi x
a llo ws y ou to de fin e y ou r o wn pr efix fo r lo g fi le na me
Measurement File Format
Defines the file format used in measurements. The file format options are Measurement file (.nmf, default) and Debuglog (.nbl
Autologging
option is selected, Nemo Handy-A will start lo gging when a script is started and stop logging when the script is finished
Log fil e splitting
Option allows you to split the log fil es into manageable sized files instead of having one large file
Measurement upload
allows you to save connection settings into configurations that can be used when uploading files on a server
Questionnaire
Allows defining when a questionnaire is displayed. You can choose to show it when a measurement is started, paused, resumed, or stopped
Background logging (OFF/ON),
when activated, enables idle logging with Nemo Handy
IP capture
option activates/deactivates IP packet capturing
IP capture max packet size
defines how many bytes to capture from each packet
IP capture filter
option defines whether captured packets are filtered
IP capture filter rule s
allows you to defin e IP capture filter rules.
Device Label
allows naming the device
Initial marker
when selected, a dialog will be displayed when logging begins, in which the user can define a measurement description
Predefined marker
allows user to defin e the marker before starting logging
Nemo Handy Configuration Handy Settings… / Settings / GPS GPS source
Allows you to choose the type of GPS
Use GPS time
option is activated is synchronized with GPS time at the beginning of a measurement
Bluetooth devices
Displays all Bluetooth devices associated with the terminal
GPS source: • Disable the use of GPS • Connect the mobile to the internal GPS • Connect the Mobile to an external GPS
Nemo Handy Configuration Handy Settings… / Settings / UI Customization Map parameters
Allows you to select parameters to be displayed on a map.
Serving info parameters
allows you to select parameters to be displayed in the serving info bar that can be displayed at the top of the screen (select Menu | Settings | Settings | Display | Show serving info).
Nemo Handy Configuration Handy Settings… / Settings / Nemo Server config Use configuration
allows enabling/disabling Nemo server configuration
Time sync
Time sync is enabled, latency and UTC time information is sent to Nemo Server with every comman
Mandatory is enabled
, configuring the server successfully is mandatory for the execution of the script
Address
Identifiers to connect to the server
Username Password Remote Number
The number of the caller (mobile)
Line number
The number of the server line
Prefix
Defines a prefix written to all measurement files made by the server. Prefix cannot contain spaces or special characters.
Sample filename
The name of the voice sample
Call Receive Timeout (sec)
Defines how long (in seconds) the server waits for a call to connect before ending the call
Call duration (sec)
Defines the duration (in seconds) of the call
MOS threshold
Can be used to limit the number of samples saved to the server. For example, only samples with a MOS score below 3 are save
Save sample
Defines whether samples falling below MOS threshold are saved or not.
Enable PESQ
Defines whether MOS values are calculated using PESQ.
Enable POLQA
Defines whether MOS values are calculated using POLQAv
Nemo Handy Configuration Handy Settings… / Settings / Check for updates Nemo Handy will automatically search (Over-The-Air) if a new version is available => need a data connection • If you do not wish Nemo Handy to check if there is a new version available at every startup, disable Check at Startup in the OTA updates settings (Menu | Settings | Settings | OTA updates). •
Nemo Handy Configuration Handy BTS File
BTS file
Selects the BTS file to use. The BTS file must be saved in nbf or csv format on file (phone / Nemo / Air Walker / BTS)
Use BTS file
Show or not the sites on the outdoor map
Cell info
Displays information about the cells on the map (System, Site, Cell, BSIC, ...)
BTS cells settings
Sets the size and color of the cells
Cell info
To select the cell information to display on the map
Nemo Handy Configuration Handy BTS information on a map
•
With Nemo Handy you can view BTS icons on a map. Open a map and go to Menu ( ) )| Settings | Settings | BTS. Activate Show BTS and define the color for active system BTS icons, other BTS icons, and active cell.
Nemo Handy Configuration Handy Map Settings
Draw route
Defines whether the measuring points made a part of a route or not
Show notifications on map
Displays or not the notification of symbols on the measure (when Draw route is activated)
Route width
Sets the line width of the route displayed on the map
Route colour
Sets the color of the line of route
Indicate parameter on route colour
Affiche les valeurs de certains paramètres sur le parcours
HTTP map loading
Defines when Nemo Handy is permitted to load a map
PRÉSENTATION DES VUES DE L’OUTIL VUES DISPONIBLES QUELQUE SOIT LE MODE
Nemo Handy-A Available views Vues
standard/option
mode
Vues
standard/option
mode
Status Slave State Script GPS Web view Indoor Outdoor Notification history BTS Youtube Facebook Summary WCDMA cell measurements WCDMA cell table GSM cell measurements GSM cell table LTE cell measurements LTE cell table
standard Standard standard standard standard standard standard standard standard standard standard standard standard standard standard standard standard standard
Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode Normal mode UMTS UMTS GSM GSM LTE LTE
Inter-system cells
standard
Normal mode
MIMO Signaling WCDMA GSM Application throughput PPP throughput Iperf Youtube parameters HSDPA HSUPA GPRS LTE link adaptation downlink LTE link adaptation uplink Voice quality WiFi Statistics
standard standard standard standard standard standard standard standard standard standard standard standard standard option standard standard
UMTS, LTE Normal mode UMTS GSM Normal mode Normal mode Normal mode Normal mode UMTS UMTS GSM LTE LTE GSM, UMTS Normal mode Normal mode
Nemo Handy-A Available views
Loggingstatus
Indicates whether the terminal is in Capture mode or not
Log file size
The size measurement file during capture
Log f ile n ame
Nom d u fichier de mesure
Log filepath
Location where measurements files are saved
Free s torage
available s torage m emory
Free memory
available p hone memory
Battery t emp
Battery t emperature
GPS status
Displays GPS status
IMEI
No. IMEI mobile
IMSI
No. subscriber IMEI
Systemlock
Displays if the mobile is locked to a system (GSM, 3G or LTE)
BandLock
Displays if the mobile is locked to a frequency band (900, 1800, 2100 ...)
Carrier Lock
Only 3G, can block the phone on a 3G channel
LTE PCI lock
Only LTE, will block the phone o n a PCI
APN
Information provided about the current connection
PDP Type Interface Address Gateway DNS NSAPI
Nemo Handy-A Available views Script file
Script Name loaded
Status
Current status of the script
Position
Indicates the current step
Repeat
Displays the number of times the script should be repeated and how many times it has been repeated now
Command
Displays the current control of the current script
Active transactions
Displays the current action
Script commands
Displays the script loaded, the current step is bold
Nemo Handy-A Available views •
It is possible to display the contents of each message by selecting one of them.
•
It is also possible to filter messages through the filter at the top of the view
•
If several possible filters, they must be separated from a space
Nemo Handy-A Available views Inter-system cells allows viewing on each system the signals of the serving and neighboring cells.
Nemo Handy-A Available views Application Throughput displays the data transfer rates DL and UL.
Nemo Handy-A Available views
Nemo Handy-A Available views Webview allows to measure the display time of a web page. To enter the Web address is displayed, press the button
Return to the previous web page Zoom in Zoom out
Access to enter a URL Stop loading the web page
Menu
Percentage of loading page
Nemo Handy-A Available views This feature is only available with the Advanced Indoor Analysis option. This is a license that must be added on mobile
Type
The% distribution of Macro and Micro cells. Unsaved cells in the BTS file are considered as Macro
Macro vs SC
RF ingress coming from the outside during indoor measurements
Nemo Handy-A Available views Cell Measurements View displays the BCCH and the RX level in the cell where the terminal is connected.
Nemo Handy-A Available views WCDMA cell measurements will display the Scrambling Code, lte RSCP and Ec / N0 of the cell where the terminal is connected as well as neighbors.
Nemo Handy-A Available views Displays throughput and BLER on the MAC layer.
Displays the number of allocated code and indicates the CQI.
Displays the modulation used.
This part shows the rate of use of each type of modulation.
Nemo Walker Air Les vues disponibles LTE cell measurements permet d’afficher le PCI, le RSRP et le RSRQ de la cellule sur laquelle le terminal est connecté.
Nemo Handy-A Available views Only in Mode UMTS or LTE Allows viewing the signals provided by MIMO systems.
Nemo Handy-A Available views Display PCI and RSCP of Components of the Carrier aggregation
NEMO HANDY FEATURES/MEASUREMENT
Nemo Handy Features/Measurement To start a measurement push the button To stop the measurement taken, press the button
Once stopped, the terminal asks whether to save the measurement file with the default name, change or delete them. You can also directly send the measurement file on a server.
Nemo Handy Features/Measurement
To access the Scripts menu, press
Nemo Handy Features/Measurement For a new script, select No script and confirm with New script.
Nemo Handy Features/Measurement In this view that it will be possible to create a script. Script file script file name in the terminal Repeats number of times we want to repeat the script System ability to force the script to a specific system Script commands all commands composing the script. To add commands, you must press Add …
Nemo Handy Features/Measurement In Add ... we find the following commands : • • • • • • • • • • • • • •
Voice call for outgoing voice call tests Answer call for incoming voice call tests Packet session to activate a packet transfer session FTP transfer for FTP transfer HTTP transfer for HTTP transfer HTML browsing for web page display tests ICMP ping for ping tests Send SMS for SMS tests Iperf TCP transfer for Iperf TCP tests Iperf UDP transfer for Iperf UDP tests YouTube for YouTube tests Facebook for Facebook tests Wait Insert a delay between two commands Nested script to insert a script in other script
Nemo Handy Features/Measurement Some rules for scripts:
For scripts that concern the transmission of data (HTTP and FTP transfer, HTML browsing, ping, Iperf, ...), it is necessary to initiate a packet session (Packet session) • When writing the script, the terminal provides for each of the selected actions, a beginning and an end action •
When the script is finished, the terminal allows to check the syntax.
NEMO HANDY-A FEATURES / FORCING
Nemo Handy-A Features / Forcing Depending on the tests to be performed, it is possible to force the terminal to operate on a network and / or a specific frequency band. For this, we use the Forcing function. 4 types of forcing : System (GSM, 3G, LTE) On Frequency band (GSM900, UMTS2100 ...) Canal (3G only) Voice Codec (GSM AMR FR, GSM AMR HR ...)
G e n e r a l: I t i s r e c om m e n d e d to t u r n o f f a n d r e s t ar t t h e m obi le to f or c e on a ban d or a s y s t em
Nemo Handy-A Features / Forcing on a system
T h e f o r c i n g i n f o r m a t i on i s a v ai la ble on t h e S t at u s v i e w
NEMO HANDY-A FEATURES / INDOOR MEASUREMENTS
Nemo Handy-A Features / Indoor measurements the Indoor measurements are available on the Map view. It is necessary to import a map Indoor (floorplan) in picture format(.jpg, .jpeg, .gif, .png and). • Transfer the image file in the folder : •
phone / Nemo / Air Walker / Maps
It is also possible to photograph a map (eg evacuation plan) • The indoor measurements are made by placing the measurement points (marker) when you moves inside a building. •
Arrêt de capture des mesures
Nemo Handy-A Features / Indoor measurements Before starting an indoor measurement, you must first load a map (jpg or iBwave format). Go to : Menu Settings… Setting Indoor Floorplans For a plan with format jpg Menu Settings… Setting Indoor Import IBwave maps For a plan with format IBwave Note : When you add a map in image format, Nemo Handy-A will automatically genere a MapInfo file (.tab) based on the image file.
Nemo Handy-A Features / Indoor measurements Loading a map Indoor Settings... Settings Indoor ->
Floorplans Configure the plan by changing the size of the map or the name of the layer
Nemo Handy-A Features / Indoor measurements Loading a map Indoor
Take example with picture
Nemo Handy-A Features / Indoor measurements
Once the plan is loaded, display the view Map If several Floorplan are loaded you can select the desired level.
• Exit building will remove the flour from the map and find the
Outdoor format. • To start the measurement, press the button
Nemo Handy-A Features / Indoor measurements the markers are used to record the tracing of a Indoor course. With this, the user in post-traitement can creating Indoor radio coverage plans, locate events as the Outdoor course. The main features are: : Adding markers on the map to
reproduce the Indoor course Cancel marker
After starting measure, just move the cross ( ) at the place where you stand and mark a measuring point with Move and then mark other items where you want to take measurements.
Nemo Handy-A Features / Indoor measurements measurement methodology Indoor • Prepare the call scenario • Load the floor plan in the terminal and make it visible on the
• • • • • • • • •
screen Make a tracking area and prepare the route measure Start measurement at the beginning of the course Start recording and start the script or run a manual call Positioning a first marker to the actual location Realize the path at constant speed Move the map and position to put a marker in the right place, at every change of direction In case of pause (static position) is prolonged , add a new marker at the same location before continuing the journey In the end, place a marker and last stop calling or script Stop Recording
Nemo Handy-A Features / Indoor measurements Distributed antenna systems (DAS) This feature requires an additional license (Advanced Indoor Analysis) The DAS option allow to see the antennas micro cells and check if the antennas transmit or not by using iBwave plans or the BTS line. A visual notification (red / green) is displayed on the map. Enable DAS option in : Menu | Settings | Settings | Indoor | DAS anomalies.
Nemo Handy-A Features / Indoor measurements BTS information on the map In the menu | Settings | Settings | BTS. Activate Show BTS, then set the color for serving cells, the active BTS etc. During measurement, the cell where the mobile is connected is highlighted with the color you selected in the settings.Le terminal doit avoir un GPS fix. you will then zoom in enough to see the BTS
ANNEXES BTS FILE
Annexes BTS File Format There are mandatory parameters and optional parameters Exemple of site file GSM : BTS.nbf
ASCII file with .nbf extension Separator "; "Or tabulation
BTS file example multi technologies UMTS / GSM
Annexes BTS File Required parameters / Whatever system
Annexes BTS File Optional parameters / Whatever system
Exemple:
BSIC_NUMBER_FORMAT “OCT” SEPARATOR “;” SYSTEM;SITE;LAT;LON;CELL;CH;BSIC;CID;LAC;DIR;NCELL_1;NCELL_2;NCELL_3 GSM;Site Name 1;65.066053;25.458366;Cell Name 1;64;77;12500;65231;0;NEMO1;NEMO2;NEMO3
Annexes BTS File Required parameters/ for GSM - Cell
Annexes BTS File optional parameters / for GSM-cell
Annexes BTS File Required parameters / for UMTS – Cell with Cell ID 16 bits
Exemple :
SYSTEM;SITE;LAT;LON;CELL;CH;CID_16 ;RNC_ID ;SCR;DIR;NCELL_1;NCELL_2;NCELL_3 UMTS;Site Name 1;65.066053;25.458366;Cell Name 1;10838;58275;1;96;0;NEMO1;NEMO2;NEMO3
Annexes BTS File Optional parameters / for UMTS - Cell
Annexes BTS File Required parameters / for LTE - Cell
Exemple :
SYSTEM;SITE;LAT;LON;CELL;CH;CID;PCI;DIR;NCELL_1;NCELL_2;NCELL_3 LTE;Site Name 1;65.066053;25.458366;Cell Name 1;65535;26842545;96;0;NEMO1;NEMO2;NEMO3
Annexes BTS File Optional parameters / for LTE - Cell
