MANUAL NO V
PUBLIC WORKS DEPARTMENT
RIGHT TO INDFORMATION ACT-2005 Section 4(1) (B) (V)
"The rules, regulations, instructions, manual and records held by Department and used by its employees for discharging functions."
INDEX Sn 1 2 3 4 5 6 7 8 9
Subject Page No Govt./PW Related Manuals,codes,publications Basic Manuals and codes Basic Manuals and codes Administrative (Non Technical) Standard Specification books P.W.Hand books Standard Plans for roads and building Maintenance booklets Employment Guarantee Scheme Some other related govt.publications Electrical wing
1 2 4 5 7 8 9 10 11
I.R.C Codes, Publications 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Transport Planning, Traffic Assessment & Policies Road Geometric & Design Features Road Markings Road Furniture & Signs Road Safety & Traffic Management Embankment Construction & Erosion Control Non-Bituminous Base and Sub-Base Design, Construction and Maintenance of Flexible Pavements Rural Roads Hill Roads Road Maintenance & Rehabilitation Road Drainage Road Machinery Codes of Practice for Bridges Inspection, Maintenance & Rehabilitation of bridges Project Preparation, Contract Management & Quality Control for bridges Other Important Publications related with bridges Standard Designs for Roads & Bridges Specifications, Rate Analysis for Roads & Bridges, Pocket Books
12 17 20 21 22 23 25 27 32 33 34 35 36 38 41 43 44 46 48
INDEX Sn
Subject
Page No
29 30
MORT&Hs booklets Miscellaneous Project Preparation, Contract Management and Quality Control
49 51
31
52
Indian Standard codes, Publications 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49
Structural safety in the building Building :Earthquake Engineering Concrete Reinforcement Painting,Varnishes and allied finishes Structural Safety Doors,Windows and Shutters Structural Engineering Structural Sections Planning,Bye-Laws and Dimensional Coordination Waterproofing and Damp-proofing Methods of Measurement of works of Civil Building Hardware Flooring,Wall finishing and roofing Building construction practices Sanitary appliances and Water fittings Soil and foundation engineering Cement and concrete Special Publication
53 55 56 59 62 65 68 72 75 80 84 89 94 102 112 124 141 158
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2 1 Basic Manuals and codes
1 Basic Manual 1929-84
The Maharashtra Public Works Manual 1929-84 . The rules and regulations, methodology, modus operandi of the Public works department
Basic manual 1929-84
The Maharashtra Public Works Account code 1967-84. Concerning account matters related with the Public works department department
2 Basic Manuals and codes : Administrative Administrative |ɶÉɺÉxÉ ¶É¤nùEòÉä ¹É (˽þnùÒ, ¨É®úÉ`öÒ, <Æ OÉVÉÒ) 1957Administrative Dictionary {ÉnùxÉɨÉEòÉä ¹É 1962 Designation Nomenclature regulations related to store ¦ÉÉÆb÷É®ú{ÉɱÉÉSÉÒ ÊxÉªÉ¨É {ÉÖ ÎºiÉEòÉ 1963 Rules and regulations |ɶÉɺÉxÉÒEò ±Éä JÉxÉ 1966 Drafting guidelines for Administrative correspondence The Maharashtra treasury rules 1968 Vol 1, 2 1968 1968 Treasury rules
¶ÉɺÉxÉ ´ªÉ´É½þÉ®úÉiÉ ¨É®úÉ`öÒ 1971 Use of Marathi language in day to day correspondence Maharastra Budget Manual Vol 1-1977 Manual of financial powers 1978-financial powers Manual of Departmental enquires (G.A.D.) 1978 Maharastra civil Services Rules 1979-Discipline and appeal rules,conduct rules Maharashtra Civil Services Rules -1981 -General conditions of services
3 Standard Specification books Specification book for building (Red Book )-1981 Specification book for roads,Bridges and c.d.work (Red Book )-1981
4 P.W. Hand Hand Book 1971
P.W.Handbook Volume -1971 (1 & 2)2)-
1974-Hand Book
Supplement P.W.D Hand book Part 1 & Part 2
P.W.handbook-1977-
Chapter 1 to 10, 12.13,16 & 17.(Roads) Chapter 31 to 38
2002
Standard plans for Roads and building Vol 1 & 2
1984
Booklet for instruction for maintenance of road
1991
Instruction for maintenance of building
5 Standard plans for Roads and building Vol 1 & 2-2002 6 Maintenance book let
7 Employment Guarantee Scheme Employment Guarantee Scheme 'Saar-Gra nth' -1990-(Compendium)
1990
8 Some other Govt Publications 1971 1973
Compendium for construction of roads Importance of quality control techniques to civil engg.works Laboratory Manual Bridge inspection Manual Type plans of residential & nonresidential buildings Manual for construction and supervision of bituminous work MORT & H specification
9 Electrical wing 1948
Indian Electricity Supply Act 1948
1956 1985 2003
Indian Electricity Rules 1956 National Electrical Code-1985 Electricity Act 2002-2003
9 I.R.C. Publications Transport Planning, Traffic Assessment & Policies IRC:102-1988
Traffic Studies for Bypasse s -IRC:102-1988, IRC:9-1972,IRC:46-1972, to IRC:-SP-24-1984
IRC:SP:36-1991
Guidelines on Format for IRC Standards-
IRC:SP:38-1992
Manual for Road Investment Decision Model (with Floppy Disk)
IRC:SP:30-1993
Manual on Economic Evaluation of Highway Projects in India (First Revision)
IRC:SP:43-1994
Guidelines on low-cost Traffic Management Technique for Urban Areas
IRC:SP:28-1995
Road Transport and Energy (First Revision)
IRC:108-1996
Guidelines for Traffic Prediction on Rural Highways
RC:SP:15-1996
Ribbon Development Along Highways and its Prevention-I
IRC:SP:45-1996
Time Series Data on Road Transport Passenger and Freight Movement (1951-1991)
MORT&H
Road Development Plan: Vision-2021--Transport Planning, Traffic Assessment & Policies
IRC:11-1962
Design and Layout of Cycle Tracks
11 Road Geometric & Design Features IRC:32-1969
Vertical and Horizontal Clearances of Telecommunication Lines
IRC:SP:12-1973
Parking Spaces for Urban Areas
IRC:54-1974
Vertical Clearances at Underpasses
IRC:65-1976
Traffic Rotaries-
IRC:66-1976
Sight Distance on Rural Roads
IRC:69-1977
Space Standards for Roads in Urban Areas
IRC:70-1977
Guidelines on Regulation and Control of Mixed Traffic in Urban Areas
IRC:73-1980
Geometric Design Standards for Rural (Non-Urban) Highways
IRC:80-1981
Bus Stops on Rural (i.e., Non-Urban) Highways
IRC:12-1983
Motor-Fuel Filling and Motor-Fuel Filling-cum-Service Stations (Second Re vision)
IRC:86-1983
Geometric Design Standards for Urban Roads in Plains
IRC:SP:23-1983
Vertical Curves -
IRC:92-1985
Guidelines for the Design of Interchanges in Urban Areas
IRC:39-1986
Standards for Road-Rail Level Crossings (First Revision) Page 1
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IRC:38-1988
Guidelines for Design of Horizontal Curves for Highways and Design Tables (First Revision)
IRC:99-1988
Tentative Guidelines on the Provision of Speed Breakers for Control of Vehicular Speeds on Minor Roads
IRC:103-1988
Guidelines for Pedestrian Facilities
IRC:64-1990
Capacity of Roads in Rural Areas (First Revision)
IRC:106-1990
Capacity of Urban Roads in Plain Areas
IRC:SP:41-1994
Design of At-Grade Intersections in Rural & Urban Areas
IRC:41-1997
Check Barriers (First Revision)
IRC:98-1997
Underground Utility Services Along and Across Roads in Urban Areas
IRC:30-1968
Standard Letters and Numerals
IRC:35-1997
Code of Practice for Road Markings(with Paints) (First Revision)
IRC:25-1967
Boundary Stones
IRC:26-1967
Type Design for 200-Metre Stones
IRC:2-1968 IRC:3-1969 IRC:8-1980 IRC:79-1981
Route Marker Signs for National Highways (First Revision) Route Marker Signs for State Routes Type Designs for Highway Kilometer Stones (Second Revision)
12 Road Markings
13 Road Furniture & Signs
IRC:31-1992 IRC:67-2001
Recommended Practice for Road Delineators New Traffic Sings Code of Practice for Road Signs (First Revision)
IRC:53-1982 IRC:SP:27-1984 IRC:93-1985
Road Accident Forms Report on Highway Safety Road Traffic Signals
IRC:SP:32-1988 IRC:SP:44-1994 IRC:75-1979 MORT&H
Road Safety for Children Highway Safety Code Safety in Construction Zones Safety in Road Design
IRC:28-1967 IRC:36-1970
Condition Surveys of Stabilized Soil Roads Construction of Earth Embankments
IRC:56-1974 MORT&H
Treatment of Embankment Slopes Computer Aided Design System for High Embankment
HRB SR No.13, 1994 HRB SR No.3, 1999
High Embankments on Soft Ground, Construction Earthwork and Subgrades
IRC:49-1973 IRC:109-1997 IRC:SP:59-2002
Black Cotton Soils Stabilization with lime Granular and Bound Bases and Sub-Bases Wet Mix Macadam
IRC:17-1965
Single Coat Bituminous Surface Dressing
14 Road Safety & Traffic Management
15 Embankment Construction & Erosion Control
16 Non-Bituminous Base and Sub-Base
17 Design, Construction and Maintenance of Flexible Pavements IRC:23-1966
Two Coat Bituminous Surface Dressing
IRC:27-1967
Bituminous Macadam
IRC:34-1970
Construction in Waterlogged Areas
IRC:57-1974
Sealing of Joints in Concrete Pavements
IRC:44-1976
Cement Concrete Mix Design for Pavements
IRC:61-1976
The Construction of Cement Concrete Pavements in Hot Weather
IRC:68-1976
Cement-Flyash Concrete Road construction
IRC:SP:17-1977
Overlays on Cement Concrete Pavements
IRC:76-1979
Structural Strength Evaluation of Rigid Pavements
IRC:77-1979
Repair of Concrete Pavements Using Synthetic Resins
IRC:82-1982
Maintenance of Bituminous Surfaces
IRC:84-1983
Curing of Cement Concrete Pavements
IRC:85-1983
Accelerated Strength Testing & Evaluation of concrete
IRC:91-1985
Concrete Pavements in Cold Weather
IRC:94-1986
Dense Bituminous Macadam
IRC:95-1987
Semi-Dense Bituminous Concrete
IRC:96 & 97-1987
Two-Coat Surface Dressing Using Cationic Bitumen Emulsion
IRC:101-1988
Guidelines for Design of Continuously Reinforced Concrete Pavement
IRC:107-1992
Mastic Wearing Courses
IRC:81-1997
Strengthening of Flexible Road Pavements
IRC:37-2001
Design of Flexible Pavements -IRC:37-2001
MORT&H
Construction and Supervision of Bituminous Works, 2001-MORT&H
IRC:SP:53-2002
Use of Polymer and Rubber Modified Bitumen -
IRC:15-2002
Construction of Concrete Roads -
IRC:58-2002
Design of Plain Jointed Rigid Pavements -
IRC:14-2004
Open Graded Premix Carpet -
IRC:SP:20-2002
Rural Roads Manual
MORD
Specifications for Rural Roads-
18 Rural Roads
Page 2
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 MORD
Standard Data Book for Analysis of Rates for Rural Roads
HRB SR No.15, 1996
Land Slide Correction Techniques
IRC:SP:48-1998
Hill Road Manual
IRC:52-2001
Alignment Survey and Geometric Design of Hill Roads -
MORT&H
Manual for Maintenance of Roads, 1983-
MORT&H
Report of the Committee on Norms for Maintenance of Roads in India, 2001
MORT&H
Maintenance Management of Primary, Secondary and Urban Roads, 2004 MORT&H
19 Hill Roads
20 Road Maintenance & Rehabilitation
21 Road Drainage IRC:SP:42-1994
Guidelines on Road Drainage
IRC:SP:50-1999
Guidelines on Urban Drainage
IRC:43-1972
Concrete Pavement Construction-
IRC:72-1978
Bituminous Pavement Construction Equipment
IRC:SP:22-1980
Type of Road Making Machinery
IRC:SP:25-1984
Maintenance of Road Rollers
IRC:90-1985
Bituminous Hot Mix Plant
22 Road Machinery
MORT&H
Handbook on Road Construction Machinery, 1985-
IRC:SP:39-1992
Guidelines on Bulk Bitumen Transportation & Storage Equipment-
IRC:87-1984
Guidelines for the Design and Erection of Falsework for Road Bridges-
23 Codes of Practice for Bridges IRC:22-1986
Composite Construction (First Revision)
IRC:83-1987 (Part II)
Elastomeric Bearings-
IRC:SP:33-1989
Guidelines on Supplemental Measures for Design, Detailing & Durability of Important Bridge Structures-
IRC:89-1997
Design and Construction of River Training & Control Works
IRC:5-1998
Road Bridges, General Features of Design
IRC:83-1999
Road Bridges, Metallic Bearings
IRC:6-2000
Road Bridges, Loads and Stresses
IRC:18-2000
Design of Road Bridges (Post-Tensioned Concrete)
IRC:21-2000
Standard Specifications Cement Concrete & bridges
IRC:78-2000
Standard Specifications Foundations and Substructure
IRC:24-2001
Standard Specifications Steel Road Bridges
IRC:40-2002
Standard Specifications a Brick, Stone Stone and Block Masonry bridges
IRC:83-2002 (Part III)
Standard Specifications Bearings,
IRC:SP:18-1978
Bridge Maintenance Inspection Manual
24 Inspection, Maintenance & Rehabilitation Rehabilitation of bridges IRC:SP:35-1990
Inspection and Maintenance of Bridges
IRC:SP:37-1991
Evaluation of Load Carrying Capacity
IRC:SP:40-1993
Techniques for Strengthening and Rehabilitation of B ridges
HRB SR No.17, 1996
Non Destructive Testing Techniques
HRB SR No.18, 1996
Corrosion and Corrosion Protection of Prestressed Concrete Bridges
IRC:SP:52-1999
Bridge Inspector
HRB SR No.19, 2001 HRB SR No.19, 2001 IRC:SP:60-2002
Bridge Inspector's Reference Manual
IRC:SP:47-1998
Systems for Concrete
IRC:SP:54-1999
Project Preparation Manual for Bridges-
IRC:SP:4-1966
Bridge Loading
Underwater Repairing of Bridge Assessment of Remaining Life of Concrete Bridges-
25 Project Preparation, Contract Management & Quality Control for bridges
26 Other Important Publications related with bridges IRC:45-1972
Resistance of in the Design of of Well Foundations
HRB SR No.10, 1989
Behavior of Concrete Under Sea-Water
IRC:SP:51-1999
Load Testing of Bridges-
IRC:SP:56-2000
Steel Pedestrian Bridges-
IRC:SP:13-2004
Design of Small Bridges and Culverts
MORT&H-1991
Cement Concrete Solid Slab super Structure
MORT&H-1991
Superstructure – Span from 10 m to 24 m
MORT&H
Composite Superstructure for 30 m Span Span 35 m Span, 40 m Span
27 (M.O.R.T.& H.)Standard Designs for Roads & Bridges
MORT&H-1992
Standard Drawings for Road Bridges – R.C.C. Solid Slab Superstructure (15° & 30° SKEW) Span 4.0 m to 10.0 m
MORT&H-1992
Type Designs for Intersections on 1992-MORT&H
MORT&H-1996
R.C.C. Solid Slab Superstructure (22.5º Skew) R.E. Span 4m to 10m
MORT&H
Prestressed Concrete Beam & RCC Slab Type Superstructure
MORT&H
Standard Plans for Single, Double and Triple Cell Box Culverts
Page 3
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2 28 Specifications, Rate Analysis for Roads & Bridges, Pocket Books
1 MORT&H
Pocketbook for Bridge Engineers, 2000 (First Revision)
MORT&H
Specifications for Road and Bridge Works, 2001 (Fourth Revision)
MORT&H
Pocketbook for Highway Engineers, 2002 (Second Revision)
MORT&H
Standard Data Book for Analysis of Rates, 2003 (First Revision)
MORT&H
Technical Circulars and Directives (Vol.I&Vol. II ),1986),1986-
MORT&H-1993
Addendum to Ministry's Technical Circulars and Directives
MORT&H-1996
Addendum to Ministry's Technical Circulars and Directives (January 93 to December 94), 1996
MORT&H-1997
Addendum to Technical Circulars & Directives (January 1995 to December 1997)
HRB SR No.12, 1994
State of the Art: Application of Geotextiles in Highway Engineering
HRB SR No.16, 1996
State of the Art: Reinforced Soil Structures Applicable to Road Design & Construction
IRC:104-1988
Guidelines for Environmental Impact Assessment of Highway Projects
IRC:SP:19-2001
Manual for Survey, Investigation and Preparation of Road Projects (Second Revision)
IRC:SP:57-2001
Guidelines for Quality Systems for Road Construction
IRC:SP:16-2004
Guidelines for Surface Evenness of Highway Pavements (First Revision)
29 National Highways M.O.R.T.& H. s booklets
30 Road Miscellaneous
31 Road Project Preparation, Contract Management and Quality Control
Indian Standard Publications 32 Structural safety in in the building Design Design Loads IS 875: Part 1 to 5: 1987
Code of practice for design loads (other than earthquake) for buildings and structures( Second revision) -IS 875: Part 1 to Part 5 1987
IS 1893: 1984
Criteria for earthquake resistant design of structures (Fourth revision)
IS 13828: 1993
Improving earthquake resistance of low strength masonry buildings - Guidelines
IS 13827: 1993
Improving earthquake resistance of earthen buildings - Guidelines
IS 13920: 1993
Ductile detailing of reinforced concrete structures subjected to seismic forces - Code of practic
IS 13935: 1993
Guidelines for repair and seismic strengthening of buildings
IS 4326: 1993
Code of practice for earthquake resistant design and construction of buildings
IS 432: Part 1&2: 1982
Mild steel and medium tensile steel bars and harddrawn steel wire
IS 1785: Part 1&2 1983
Hard drawn steel wire for prestressed concret -(second revision)
IS 6006: 1983
Uncoated stress relieved strand for prestressed concrete
33 Building :Earthquake Engineering
34 Concrete Reinforcement
IS 10790: Part 1&2: 1984
Methods of sampling of steel for prestressed and reinforced concrete Prestressing steel
IS 1786: 1985
High strength deformed steel bars and wires for concrete reinforcement (superseding IS:1139-1966)(third revision)
IS 13620: 1993
Specification for fusion boned epoxy coated reinforcing bars
IS 2338: Part 1&2 : 1967
Code of practice for finishing of wood and wood based materials:
35 Painting,Varnishes and allied finishes IS 2524: Part 1&2: 1968
Code of practice for painting of non-ferrous metals in building:
IS 1477: Part 2: 1971
Code of practice for painting of ferrous metals in buildings: Part 2 painting (First revision)
IS 9954: 1981
Pictorial Surface Preparation Standards for Painting of Steel Surfaces
IS 2395: Part 1&2: 1994
Painting of concrete, masonry and plaster surfaces
IS 14428: 1997
Guidelines for painting of structures in aggressive chemical environment
IS 1477: Part 1: 2000
Code of practice for painting of ferrous metals in buildings:( first revision)
IS 4014: Part 2: 1967
Code of practice for Steel Tubular Scaffolding - Part II: Safety Regulations for Scaffolding-
IS 5121: 1969
Safety code for piling and other deep foundations
IS 7293: 1974
Safety code for working with construction machinery
IS 4756: 1978
Safety code for tunneling work (First Revision)
IS 8989: 1978
Safety code for erection of concrete framed structures-
IS 4081: 1986
Safety code for blasting and related drilling operations-
IS 3696: Part 1&2 : 1991
Safety code of scaffolds and ladders:
IS 4130: 1991
Safety code for demolition of buildings (Second Revision)-
IS 3764: 1992
Code of safety for excavation work (First Revision)-
IS 13415: 1992
Protective Barriers in and Around Builders - Code of Safety
IS 13416: Part 1to 5: 1992
Recommendations for preventive measures against hazards at workplaces
IS 1081: 1960
Code of practice for fixing and glazing of metal (steel and aluminum)doors, windows and ventilators
IS 1948: 1961
Specification for aluminium doors, windows and ventilators
IS 4962: 1968
Specification for wooden side sliding doors
36 Structural Safety
37 Doors,Windows and Shutters
IS 4913: 1968
Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows
IS 4043: 1969
Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors, Windows and Shutters
IS 4351: 1976
Specification for steel door frames (First Revision)
IS 6248: 1979
Specification for Metal Rolling Shutters and Rolling Grills (First Revision)-
IS 1038: 1983
Specification for steel doors, windows and ventilators (third revision)-
IS 2191 Part 1 &2
Specification for wooden flush door shutters (Cellular and hollow core type) Part 1 & 2
IS 10428: 1983
Glossary of terms relating to doors
IS 10451: 1983
Specification for steel sliding shutters (top hung type)
IS 10521: 1983
Specification for collapsible gates Page 4
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IS 1003: Part 1&2: 1991
Specification for timber timber panelled and glazed shutters: (third revision)-
IS 6198: 1992
Specification for ledged, braced and battened timber door shutters (Second Revision)-
IS 4021: 1995
Timber Door, Window and Ventilators Frames - Specification (Third Revision)-
Is 4020: 1998
Door Shutters - Methods of Tests (Third Revision) (Superseding
IS 2202: Part 1&2: 1999
Specification for wooden flush door shutters (solid core type): Part 1 plywood face panels (Sixth Revision)-
IS 4014: Part 1: 1967
Code of practice for steel tubular scaffolding Part 1 Definitions and materials
IS 806: 1968
Code of practice for use of steel tubes in general building construction (First Revision)
38 Structural Enginnering Tubes Sheets etc.Fabrication Use of Steel
IS 805: 1968
Code of practice for use of steel tubes in general building construction (First revision)
IS 7205: 1974
Safety Code for Erection of Structural Steelwork
IS 7215: 1974
Tolerances for fabrication of steel structures
IS 800: 1984
Code of practice for general construction in steel (Second revision)-
IS 12843: 1989
Tolerances for erection of steel structures-
IS 4000: 1992
Code of practice for high strength bolts in steel structures (First Revision)-
39 Structural Sections IS 3964: 1980
Light ralls (First Revision)-
IS 808: 1989
Dimensions for hto rolled steel beam, column, channel and angle sections (Third Revision)-
IS 1730: 1989
Dimensions for steel plates, sheets strips and flats for general engineering purposes (second revision)-
IS 12778: 1989
Hot rolled steel parallel flange beam and column sections - Dimensions-
IS 7452: 1990
Specification for hot-rolled steel sections for doors, windows and ventilators (Second Revision)-
IS 3954: 1991
Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions (First Revision)
IS 2718: 1964
Recommendations for preferred dimensions for storey heights (Superseded by IS 7922) (withdrawn)-
IS 7564: Part 1to 4: 1974
Recommendations for co-ordination of dimensions in buildings - Ar rangements of building components and assemblies: Part 1 Funtional group 1 Structures
IS 7973: 1976 IS 8338: 1976
Code of practice for architectural and building working drawings Recommendations relating to primary elements in the design of school library buildings
IS 4919: 1981
Glossary of terms applicable to landscape and horticulture work (First Revision)
IS 4993: 1983
Glossary of terms relating to modular co-ordination (Second Revision)-
IS 10600: 1983
Recommendations for modular co-ordination - principles and rules Recommendations for modular co-ordination: notations and symbols for modular draw ings
40 Planning,Bye-Laws and Dimensional Co-ordination
IS 11775: 1986 IS 5197: 1987 IS 6820: 1987 IS 7921:1987
Recommendations for layout and planning of drawings offices
IS 7922: 1987
Recommendations for modular co-ordination in building industry: Vertical c o-ordination (First Revision)
IS 12073: 1987
Recommendations for modular co-ordination: Co-ordinating sizes for doorsets and windowsets
IS 6408:Part 1&2-1990 1992
Code of practice for architectural and building drawings (second revision) (superseding IS 2332)
IS 1553: 1989
Design of library buildings - Recommendations relating to its Primary elements (second revision)
IS 2663: 1989
Design of buildings for archives - Recommendations relating to its primary elements (Second Revision)
IS 6408:Part 1:1990
Recommendations for Modular Co-ordination in Building Industry: Tolerances (First Revision)
Recommendations for modular co-ordination in building industry: Applications (First Revision) Recommendations for modular co-ordination in building industry: Horizontal co-ordination (First Re vision)(Superseding IS 7184)
IS 13613: 1992
Recommendations for modular co-ordination in building industry : Location of structural walls and floor s labs
IS 13612: Part 1: 1993
Modular co-ordination for normal brickwork - Rec ommendation Part 1 Burnt clay bricks-
IS 4365: 1967
Code of practice for application of bitumen mastic for waterproofing of roofs
IS 7198: 1974
Code of practice for damp-proofing using bitumen mastic-IS 7198: 1974
IS 7290: 1979
Recommendations for use of polyethylene film for water-proofing of roofs (First Revision)
IS 9918: 1981
Code of practice for in-situ waterproofing and damp-proofing treatments with glass fibre tissue reinforced bitumen
41 Waterproofing and Damp-proofing
IS 3037:1986
Specification for bitumen mastic for use in water-proofing of roofs (First revision)
Is 3384: 1986
Specification for bitumen primer for use in waterproofing and damp-proofing (First Revision)
IS 4911: 1986
Glossary of terms rela ting to bituminous waterproofing and damp-proofing of buildings (First Revision)
IS 5871: 1987
Specification for Bitumen mastic for tanking and damp-proofing (First Revision)
IS 12027: 1987
Specification for silicone-based water repellents
IS 12054: 1987
Code of practical for application for silicon based water repellent
IS 3067: 1988
Code of practice for general design details and preparatory work for damp-proofing and water-proofing of buildings (First revision)
IS 6494: 1988
Code of practice for water-proofing of underground water reservoirs and swimming pools (First Revision)
IS 1346: 1991
Code of practice for waterproofing of roofs with bitumen felts (third revsion)
IS 1580: 1991
Specification for bituminous compound for water-proofing and caulking purposes (second revision)
IS 1609: 1991
Code of practice for laying damp-proofing treatment using bitumen felts (second revision)
IS 13182: 1991
Waterproofing and Damp-Proofing of Wet Areas in Buildings - Recommendations
IS 3036: 1992
Code of practice for laying lime concrete for a waterproofed roof finish (Second revision)
IS 13435: Part 1-7: 1992
Acrylic based polymer waterproofing material - Method of tests (Part 1 to 5)
IS 13826: Part 1-6: 1993
Bitumen based felts - Method of test Part 1 Breaking strength test
IS 1322: 1993
Specification for bitumen felts for water proofing and damp-proofing (fourth revision)
IS 7193: 1994
Specification for glass fibre base bitumen felts (First Revision)
IS 14695: 1999
Glass Fiber Base Coal Tar Pitch Outerwrap - Specification
IS 3861: 1975
Method of measurement of plinth, carpet and rentable area of buildings (First Revision)
IS 1200: Part 1-28: 1992
Methods of measurement of building and c ivil engineering works:
42 Methods of Measurement of works of Civil Engineering
Page 5
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2 43 Building Hardware
1 IS 1837: 1966
Specification for fanlight pivots (first revision)
IS 5899: 1970
Specification for bath-room Latches
IS 5930: 1970
Specification for mortice latch (vertical type)
IS 6318: 1971
Specification for plastic window stays and fasteners-
IS 5187: 1972
Specification for flush bolts (First Revision)
IS 452: 1973
Specification for door springs, rat-tail type (second revsion)
IS 1019: 1974
Specification for rim latches (Second revision)
IS 7196: 1974
Specification for hold fast-IS 7196: 1974
IS 7197: 1974
Specification for double action floor springs (without oil check) heavy door
IS 7540: 1974
Specification for mortice dead locks
IS 4621: 1975
Specification for indicating bolts for use in public baths and Lavatories (First Revision)
IS 4992: 1975
Specification for door handles for mortice lock (vertical type) (First Revision)
IS 7881: Part 1&2: 1975
Glossary of terms relating to builders hardware:
IS 2209: 1976
Specification for mortice locks (vertical type) (third revision)-
IS 8760: 1978
Specification for mortice sliding door locks, with lever mechanism-
IS 729: 1979
Specification for drawer locks, cupboard locks and box locsk (third revision)-
IS 9106: 1979
Specification for rising butt hinges-
IS 1823: 1980
Specification for floor door stoppers (third revision)-
IS 9460: 1980
Specification for Flush Drop Handle for Drawers-
IS 9899: 1981
Specification for hat , coat and wardrobe hooks-
IS 10019: 1981
Specification for mild steel stays and fasteners-
IS 6343: 1982
Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighting up to 40 kg (First Revision)-
IS 10342: 1982
Specification for curtain rail system-
IS 7534: 1985
Specification for sliding locking bolts for use with padlocks (First Revision)-
IS 204: Part 1&2: 1992
Specification for tower bolts Part 1& 2 1992
IS 362: 1991
Specification for parliament hinges (fifth revision)-
IS 205: 1992
Specification for non-ferrous metal butt hinges (fourth revision)-
IS 206: 1992
Specification for tee and strap hinges (fourth revision)-
IS 3818: 1992
Specification for continuous (Plano) hinges (Third Re vision)-
IS 3847: 1992
Specification for mortice night latches (First Revision)-
IS 6315: 1992
Specification for floor springs (hydraulically regulated) for heavy doors (Second Revision)-
IS 364: 1993
Specification for fanlight catch (Third Revision)-
IS 453: 1993
Specification for double acting spring hinges (third revision)-
IS 2681: 1993
Specification for non-ferrous metal sliding door bolts (aldrops) for with padlocks (Third R evision)
IS 3843: 1995
Specification for steel back flap hinges (Second Revision)-
IS 3843: 1995
Specification for door handles (fifth revision)-
IS 3564: 1996
Hydraulically Regulated Door Closers - Specification (Fourth Revision)-
IS 12817: 1997
Specification for stainless steel butt hinges (First Revision)-
IS 10132: 1932
Method of Test for Materials for Use in the Preparation of Magnesium Oxychloride Flooring Compositions-
IS 2402: 1963
Code of practice for external rendered finishes-
IS 4456: Part 1 to 3: 1967
Methods of Test for Chemical Resistant Mortars - Part I to III -1967
IS 4860: 1968
Specification for acid-resistant bricks-
IS 5318: 1969
Code of practice for laying of flexible PVC sheet and tile flooring-
IS 5491: 1969
Code of practice for laying of in-situ granolithic concrete flooring topping-
IS 4832: Part 1: 1969
Specification for chemical resistant mortars: Part I Silicate type-
IS 2571: 1970
Code of practice for laying in-situ cement concrete flooring (First Revision)-
IS 5766: 1970
Code of practice for laying of burnt clay brick flooring-
IS 1443: 1972
Code of practice for laying and finishing of cement concrete flooring tiles (first revision)-
IS 1661: 1972
Code of practice for application of cement and cement-lime plaster finishes (first revision)-
IS 8374: 1977
Specification for Bitumen Mastic, Anti-Static and Electrically Conducting Grade-
IS 1196: 1978
Code of practice for laying bitumen mastic flooring (Second Revision)-
IS 9162: 1979
Methods of Tests for Epoxy Re sins, Hardeners and Epoxy Re sin Compositions for Floor Topping-
IS 9197: 1979
Specification for epoxy resin, hardners and epoxy resin compositions for floor topping-
IS 1237: 1980
Specification for cement concrete flooring tiles (first revision)-
IS 4442: 1980
Code of practice for use of sulphur chemical resistant mortars (First Revision)-
IS 4443: 1980
Code of practice for use of resin type chemical resistant mortars (First Revision)-
IS 4441: 1980
Code of practice for use of silicate type chemical resisitant mortars (First Revision)-
IS 9704: 1980
Methods of test for linoleum sheets and tiles-
IS 9510: 1980
Specification for bitumen mastic acid-resisting grade-
44 Flooring,Wall finishing and roofing
IS 657: 1982
Specification for materials for use in the manufacture of magnesium oxychloride flooring comnpositions (second revision)-
IS 658: 1982
Code of practice for magneisum oxychloride composition floors (Second revision)-
IS 4457: 1982
Specification for ceramic unglazed vitreous acid resisting tile (First Revision)-
IS 10403: 1983
Glossary of terms relating to building finishes-
IS 2114: 1984
Code of practice for laying in-situ terrazzo floor finish (first revision)-
IS 2394: 1984
Code of practice for application of lime plaster finish (first revision)-
IS 3462: 1986
Specification for unbacked flexible PVC flooring (Second Revision)-
Is 3464: 1986
Methods of Test for Plastic Flooring and Wall Tiles (Second Revision)Page 6
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IS 4631: 1986
Code of practice for laying of epoxy resin floor toppings(First Revision)-
IS 5317: 1987
Specification for bitumen mastic for bridge decking and roads (First Revision)-
IS 12583: 1988
Specification for corrugated bitumen roofing sheets-
IS 12866: 1989
Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)-
IS 809: 1992
Specification for rubber flooring materials for general purposes (first revision)-
IS 653: 1992
Specification for linoleum sheets and tiles (third revision)-
IS 1542: 1992
Specification for sand for plaster (Second revision)-
IS 13711: 1993
Ceramic tiles - Sampling and basis for acceptance-
IS 13712: 1993
Ceramic tiles - Definitions , classifications , characteristics and marking-
IS 13630: Part 1to13: 1993
Methods of test for ceramic tiles
IS 13753:1993
Specification for dust pressed ceramic tiles with water absorption of E > 10% Group (B III)-
IS 13801: 1993
Chequered cement concrete tiles - Specification-
IS 1946: 1961
Code of practice for use of fixing devices in walls, ceilings and of solid construction-
IS 2204: 1962
Code of practice for construction of reinforced concrete shell roof-
IS 2792: 1964
Code of practice for design and construction of stone slab over joist floor-
IS 4101: Part 1&2:1967
Code of practice for external facing and veneers: Part 1 & 2 1967
IS 3414: 1968
Code of practice for Design and Installation of Joints in Buildings-
IS 4920: 1968
Glossary of terms applicable to roof coverings-
45 Building construction practices
IS 4924: Part 1&2: 1968
Method of test for nail jointed timber trusses: Part I & 2-1968
IS 4983: 1968
Code of Practice for Design and Construction of Nailed Laminated Timber Beams-
IS 5389: 1969
Code of practice for laying of hardwood parquet and wood block floors-
IS 2116: 1980
Specification for sand for masonry mortars (first revision)-
IS 2118: 1980
Code of practice for construction of jack-arch type of built up floor or roof (first revision)-
IS 2119: 1980
Code of practice for construction of brick-cum concrete composite (madras terrace) floor and roof (first revision)-
IS 9472: 1980
Code of practice for laying mosaic parquet flooring-
IS 2250: 1981
Code of practice for preparation and use of masonry mortars (first revision) (superseding IS 1625)-
IS 6313: Part 1to3: 1981
Code of practice for anti-termite measures in buildings:
IS 1838: Part 1&2: 1983
Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient type):
IS 2366: 1983
Code of practice for nail-jointed timber construction (first revision)Code of practice for patent glazing-
IS 10439: 1983
IS 1834: 1984
Code of practice for construction of reinforced brick and r.b.c.floors and roofsMethods of test for preformed fillers for expansion joints in paving a nd structural construction-IS 10566: 1983 Specification for Hot applied sealing compounds for joints in concrete (first revision)-
IS 2441: 1984
Code of practice for fixing ceiling covering (first revision)-
IS 2527: 1984
Code of practice for fixing rainwater gutters and downpipes for drainage (First Revision)-
Is 2858: 1984
Code of practice for roofing with mangalore tiles (First revision)-
IS 5390: 1984
Code of practice for construction of timber ceilings (First Revision)-
IS 10440: 1983
IS 10959: 1984
Glossary of terms for sealants for building purposes (ISO 9627-1981)-
IS 10958: 1984
General check list of functions of joints in building (ISO 3447 0 1975)-
IS 11096: 1984
Code of practice for design and construction of bolt-jointed construction-
IS 11134: 1984
Code of practice for setting out of buildings-
IS 4101: Part 3: 1985
Code of practice for External Cladding Part 3: Wall Tiling and Mosaics (First Revision)-
IS 6509: 1985
Code of practice for installation of joints in concrete pavements (First Revision)-
IS 11433: Part 1&2: 1985
Specification for one part grade polysulphide base joints sealant Part 1 General requirements-
IS 3629: 1986
Specification for structural timber in building (First Revision)-
IS 11817: 1986
Classification of joints in buildings for accommodation of dimensional deviations during construction (ISO 7727 - 1984)-
IS 11818: 1986
Method of test for laboratory de termination of air permeability of joints in buildings (ISO 6589-1983)-
IS 1905: 1987
Code of practice for Structural use of unreinforced masonry (third revision)-
IS 12093: 1987
Code of practice for laying and fixing of sloped roof coverings using plan and corrugated galvanized steel sheets-
IS 12118: Part 1: 1987
Specification for two parts polysulphide based sealant : Part 1 General requirements-
IS 3548: 1988
Code of Practice for Glazing in Buildings (First Revision)
IS 4891: 1988
Specification for preferred cut sizes of structural timber (First Revision)-
IS 1414: 1989 IS 3670: 1989
Code of practice for fixing wall coveringCode of practice for construction of timber floors (First Revision)-
IS 12727: 1989
Code of practice for no fines cast in situ cement concrete-
IS 2212: 1991
Code of practice for brickwork (first revision)-
IS 1634: 1992
Code of practice for design and construction of wood stairs for houses (second revision)-
IS 3630: 1992
Construction of Non-load Bearing Gypsum Block Partitions - Code of Practice (First Revision)-
IS 883: 1994
Code of practice for design of structural timber in building (Fourth revision)-
IS 10957: 1999
Joints in Buildings - Vocabulary (First Revision)-
IS 1701: 1960
Specification for mixing valves for a blutionary and domestic purposes-
IS 5219: Part 1: 1969
Specification for cast copper alloys traps: Part 1 P and Straps-
IS 5434: 1969
Specification for non-ferrous alloy bottle traps for marine use-
IS 5455: 1969
Specification for cast-iron steps for manholes-
IS 775: 1970
Specification for enamelled cast iron brackets and supports for wash basins and sinks (Second revision)-
IS 5961: 1970
Specification for cast iron gratings for drainage purposes-
IS 772: 1973
Specification for general requirements for enamelled cast iron sanitary appliances (Second revision)-
46 Sanitary appliances and Water fittings
Page 7
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IS 1700: 1973
Specification for drinking fountains (First revision)-
IS 2401: 1973
Code of practice for selection, installation and maintenance of domestic water meters (First Revision)-
IS 782: 1978
Specification for caulking lead ( Third revision)-
IS 8718: 1978
Specification for vitreous enamelled steel kitchen sinks-
IS 8727: 1978
Specification for vitreous enamelled steel wash bsins-
IS 771: Part 1to7: 1979
Specification for glazed fire-clay sanitary appliances: (second revision)-
IS 2963: 1979
Specification for copper alloy waster-fittings for wash basins and sinks (First revision)-
IS 3004: 1979
Specification for plug cocks for water supply purposes (First revision)
IS 3006: 1979
Specification for chemically resistant glazed stoneware pipes and fittings (First revision)-
IS 3311: 1979
Specification for waste plug and its accessories for sinks and washbasins (First revision)-
IS 9739: 1981
Specification for pressure reducing valves for domestic water supply systems-
IS 9758: 1981
Specification for flush valves and fittings for water closets and urinals-
IS 1795: 1982
Specification for pillar taps for water supply purposes (second revision)-
IS 774: 1984
Specification for flushing cistern for water closets and urinals (other than plastic cistern) (Fourth revision)-
IS 780:1984
Specification for sluice valves for water works purposes (50 to 300 mm size) (Sixth revision) (superseded by IS 14846) (withdrawn)-
IS 781: 1984
Specification for cast copper alloy screw down bib taps and stop valves for water services(Third revision)-
IS 1711: 1984
Specification for self-closing taps for water supply purposes (Second revision)-
IS 9338: 1984
Specification for cast iron screw-down stop valves and stop and check valves for water works purposes (First Revision)-
IS 2326: 1987
Specification for automatic flushing cisterns for urinals (Other than plastic cisterns) (First revision)-
IS 12234: 1988
Specification for plastic equilibrium PVC Pipes for Potable Water Supplies-
IS 1726: 1991
Specification for cast iron manhole covers and frames (third revision)-
IS 651: 1992
Specification for salt glazed stoneware pipe and fittings (fifth revision)-
IS 11246: 1992
Specification for glass fibre reinforced polyester resins (GRP) squatting pans (First Revision)-
IS 8931: 1993
Specification for copper alloy fancy single taps,combination tap assembly and stop valves for water services(First Revision)(Superseding IS 8934)
IS 13983: 1994
Specification for stainless steel sinks for domestic purposes-
IS 779: 1994
Specification for water meters (domestic type) (Sixth revision)-
IS 2556: Part 1: 1994
Specification for vitreous sanitary appliances (vitreous china): (Third Revision)- Part 1 to Part 15-1994 15-1994
IS 7231: 1994
Specification for plastic flushing cisterns for waterclosets and urinals (First Revision)-
IS 2548: Part 1: 1996-
Specification for plastic seats and covers for water-closets: Part 2 Thermoset seats and covers (Fifth Revision)
IS 2548: Part 2: 1996
Specification for plastic seats and covers for water-closets: Part 2 Thermo plastic seats and covers (Fifth Revision)
IS 6784: 1996
Method for performance testing of water meters (domestic type) (Second revision)-
IS 9140: 1996
Method of sampling of vitrous and fire clay sanitary appliances (Second Revision)-
IS 1703: 2000
Water fittings - Copper alloy Float Valves (horizontal Plunger Type)
IS 9763: 2000
Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services - Specification (Second Revision)-IS 9763: 2000
IS 2720: Part XV:1965
Methods of Test for Soils - Part I to Part XXXIX
IS 4332: Part 1:1967
Methods of test for stabilized soils: Part 1 to 8 1965
47 Soil and foundation engineering
IS 1498: 1970
Classification and identification of soils for general engineering purposes (first revision)
Is 2809: 1972
Glossary of terms and Symbols relating to soil engineering (First revision)
IS 4968: Part 1: 1976
Method for subsurface sounding for soils: Part I to Part III Dynamic method using 50 mm cone without betonite slurry (First Revision)-
IS 8009: Part 1: 1976
Code of Practice for Calculation of Settlements of Foundations-Part I:& II Shallow Foundations Subjected to Symmetrical Static Vertical Loads1976
IS 4434: 1978
Code of practice for in-situ vane shear test for soils (First Revision)-
IS 8763: 1978
Guide for undistrubed sampling of sands a nd sandy soils-
IS 1892: 1979
Code of practice for subsurface investigations for foundations (First revision)-
IS 2810: 1979
Glossary of terms relating to soul dynamics (First revision)-
IS 2974: Part 4: 1979
Code of practice for design and construction of machine foundations: Part 4 Foundations for rotary type machines of low frequency (First revision)-
IS 4091: 1979
Code of Practice for Design and Construction of Foundations for Transmission Line Towers and Poles (First Revision)
IS 9198: 1979
Specification for compaction rammer for soil testing-
IS 9214: 1979
Method for determination of modulus of sub-grade reaction (k-value) of soils in the field-
IS 9259: 1979
Specification for liquid limit apparatus for soils-
IS 2911: Part 2: 1980
Code of practice for desing and construction of pile foundations: Part 2 to Part 4 mber piles (First Revision)-1980
IS 2974: Part 2: 1980
Code of practice for design and construction of machine foundations: Part 2 Foundations for impact type machine (hammer foundations) (First revision)-
IS 9556: 1980
Code of practice for design and construction of diaphragm walls-
IS 9669: 1980
Specification for CBR moulds and its accessories-
IS 2131: 1981
Method for standard penetration test for soils (first revision)-
IS 2950: Part 1: 1981
Code of Practice for Design and Construction of Raft Foundations - Part I : Design (Second revision)-
IS 6403: 1981
Code of practice for determination of bearing capacity of shallow foundations (First Revision)-
IS 9716: 1981
Guide for lateral dynamic load test on piles-
IS 10042: 1981
Code of practice for site-investigations for foundation in gravel boulder deposits-
IS 9759: 1981
Guidelines for de-watering during construction-
IS 2974: Part I: 1982 IS 1725: 1982
Code of practice for design and construction of machine foundation - Part I : Foundation for reciprocating type machines (Second Revision)Specification for soil based blocks used in general building construction (first revision)Page 8
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IS 1888: 1982
Method of load test on soils (second revision)-
IS 10074: 1982
Specification for compaction mould assembly for light and heavy compaction test for soils-
IS 10077: 1982
Specification for equipment for determination of shrinkage factors-
IS 10108: 1982
Code of practice for sampling of soils by thin wall sampler with stationery piston-
IS 10270: 1982
Guidelines for design and construction of prestressed rock anchors-
IS 10379: 1982
Code of practice for field control of moisture and compaction of soils of embankment and subgrade-
IS 10442: 1983
Specification for earth augers (spiral type)-
IS 10589: 1983
Specification for equipment for determination of subsurface sounding of soils-
IS 10837: 1984
Specification for moulds and accessories for determination of density index (relative density) of cohesionless soils-
IS 11089: 1984
Code of practice for design and construction of ring foundation-
IS 1080: 1985
Code of practice for design and construction of shallow foundations in soils (other than raft, ring and shell) (second revision)-
IS 11209: 1985
Specification for mould assembly for determination of permeability of soils-
IS 11229: 1985
Specification for shear box for testing of soils-
IS 11550: 1985
Code of practice for field instrumentation of swelling pressure in expansive soils-
IS 1904: 1986
Code of practice for design and construction of foundations in soils: general requirements (third revision)-
IS 11593: 1986
Specification for shear box (large) for testing of soils-
IS 2720: Part 26: 1987
Methods of Test for Soils - Part 26: Determination of pH Value (Second revision)-
IS 2720: Part 36: 1987
Methods of test for soils: Part 36 Laboratory determination of permeability of granular soils (constant head) (First revision)-
IS 2974: Part 5: 1987
Code of practice for design and construction of machine: foundations Part 5 Foundations for impact machines other than hammers (forging and stamping press, pig breakers, drop crusher and jolter) (First revision)-
IS 12023: 1987
Code of practice for field monitoring of movement of structures using tape extensometer-
IS 12175: 1987
Specification for rapid moisture meter for rapid determination of water content for soil-
IS 12208: 1987
Method for measurement of earth pressure by hydraulic pressure cell-
IS 12287: 1988
Specification for consolidometer for determinationof consolidation properties-
IS 2720: Part 31: 1990
Methods of Test for Soils - Part 31: Field Determination of California Bearing Ration (First revision)-
IS 12979: 1990
Specification for mould for determination of linear shrinkage-
IS 2720: Part 10: 1991
Methods of test for soils: Part 10 Determination of unconfined compressive strenght (Second revision)-
IS 2720: Part 19: 1992
Methods of test for soils - part 19: Determination of Centrifuge Moistrue equivalent (First Revision)-
IS 2720: Part 9: 1992
Methods of test for soils: Part 9 Determination of dry density - moisture content relation by constant weight of soil method (First Revision)-
IS 2720: Part 20: 1992
Methods of test for soils: Part 20 Determination of linear shrinkage (First revision)-
IS 2974: Part 3: 1992
Code of practice for design and construction of machine foundations: Part 3 Foundations for rotary type machines (Medium and high frequency) (Second revision)-
IS 5249: 1992
Method of test for determination of dynamic properties of soil (Second Revision)-
IS 2720: Part 18: 1992
Methods of test for Soils - Part 18: Determination of Field Moisture Equivalent (First revision)-
IS 13094: 1992
Guidelines for selection of ground improvement techniques for foundation in weak soils-
IS 13301: 1992
Guidelines for vibration isolation for machine foundations-
IS 13468: 1992
Specification for apparatus for determinationof dry density of soils by core cutter method-
IS 2720: Part 11: 1993
Methods of test for soils : Part 11 Determination of the Shear Strength Parameters of a specimen tested in inconsolidated, indrained triaxial compression without the measurement of pore water pressure (First revision)-
IS 6717)-IS 457: 1957
Code of practice for general construction of plain and reinforced concrete for dams and other massive structures (superseding
IS 1199: 1959
Methods of sampling and analysis of concrete-
48 Cement and concrete
IS 516: 1959
Method of test for strength of concrete-
IS 2386: Part 1: 1963
Methods of Test for agregates for concrete - Part 1: Particle Size and shape-
IS 2386: Part 2: 1963
Methods of test for aggregates for Concrete - Part 2: Estimation of deleterious materials and organic impurities-
IS 2386: Part 4: 1963
Methods of test for aggregates for Concrete - Part 4: Mechanical properties-
IS 2386: Part 6: 1963
Methods of test for aggregates for Concrete - Part 6: Measuring mortar making properties of fine aggregates-
IS 2386: Part 8: 1963
Methods of test for aggregates for Concrete - Part VIII: Petrographic examination-
IS 2386: Part 3: 1963
Methods of test for aggregates for Concrete - Part 3: Specific gravity, density, voids, absorption and bulking-
IS 2386: Part 5: 1963
Methods of test for aggregates for Concrete - Part V: Soundness-
IS 2386: Part 7: 1963
Methods of test for aggregates for Concrete - Part VII: Alkali aggregate reactivity-
IS 3085: 1965
Method of Test for Permeability of Cement Mortar and Concrete-
IS 3370: Part 1: 1965
Code of practice for concrete structures for the storage of liquids: Part 1 General requirements-
IS 3370: Part 2: 1965
Code of practice for concrete structures for the storage of liquids: Part 2 Reinforced concrete structure-
IS 1727: 1967
Methods of test for pozzolanic materials (first revision)-
IS 2770: Part 1: 1967
Methods of testing bond in reinforced concrete Part 1 Pull-out test-
IS 3370: Part 3: 1967
Code of practice for concrete structures for the storage of liquids: Part 3 Prestressed concrete structures
IS 3370: Part 4: 1967
Code of practice for concrete structures for the storage of liquids: Part 4 Design tables-
IS 4305: 1967
Glossary of Terms Relating to Pozzolana-
IS 4845: 1968
Definitions and terminology relating to hydraulic cement-
IS 5525: 1969
Recommendations for Detaling of Reinforcement in Reinforced-
IS 5536: 1969
Specification for constant flow type air-permeability apparatus (Lea and Nurse type)-
IS 6461: Part 1: 1972
Glossary of terms relating to cement concrete: Part I to viiConcrete aggregates-
IS 6461: Part 2: 1972
Glossary of Terms Relating to Cement Concrete - Part II: Materials (Other than Cement and Aggregate)-
IS 6461: Part 3: 1972
Glossary of Terms Relating to Cement Concrete - Part III: Concrete Reinforcement-
IS 6461: Part 4: 1972
Glossary of terms relating to cement concrete: Part IV Types of concrete-
IS 6461: Part 5: 1972
Glossary of terms relating to cement concrete: Part V Formwork for concrete-
IS 6461: Part 6: 1972
Glossary of terms relating to cement concrete: Part VI Equipment, tools and plantPage 9
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1 IS 6491: 1972
Methods of Sampling Fly Ash-
IS 6925: 1973
Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures-
IS 7320: 1974
Specification for concrete slump test apparatus-
IS 7325: 1974
Specification for apparatus for determining constituents of fresh concrete-
IS 2645: 1975
Specification for Integral Cement Waterproofing Compounds (First Revision)-
IS 4926: 1976
Specification for Ready-Mixed Concrete (First Revision)-
IS 8142: 1976
Method of test for determining setting time of concrete by penetration resistance-
IS 9013: 1978
Method of making, curing and determining compressive strength of accelerated cured concrete test specimens-
IS 9284: 1979
Method of test for abrasion resistance of concrete-
IS 9377: 1979
Specification for apparatus for aggregate impact value-
IS 1343: 1980
Code of practice for prestressed concrete (First revision)-
IS 9459: 1980
Specification for apparatus for use in measurement of length change of hardened cement paste,mortar and concrete-
IS 3812: 1981
Specification for fry ash for use as pozzolans and admixture (First Revision)-
IS 10070: 1982
Specification for machine for abrosion testing of coarse aggregates-
IS 10086: 1982
Specification for moulds for use in tests of cement and concrete-
IS 10262: 1982
Recommended guidelines for concrete mix design-
IS 10297: 1982
Code of practice for design and construction of floors and roofs using precast reinforced/ prestressed concrete ribbed or cored slab unit-
IS 3558: 1983
Code of practice for use of immersion vibrators for consolidating concrede (First Revision)-
IS 5512: 1983
Specification for flow table for use in tests of hydraulic cements and pozzolanic materials (First Revision)-
IS 10505: 1983
Code of practice for construction of floors and roofs using precast concrete waffle units-
IS 2506: 1985
General Requirements for Concrete Vibrators, Screee Board Type (First Revision)-
IS 4032: 1985
Method of chemical analysis of hydraulic cement (First Revision)-
IS 11447: 1985
Code of practice for construction with large panel prefebricates-
IS 3535: 1986
Methods of sampling hydraulic cement (First Revision)-
IS 12269: 1987
Specification for 53 grade ordinary Portland cement-
IS 4031: 1988
Methods of physical tests for hydraulic cement:Part 1 to 15 -1988
IS 12330: 1988
Specification for sulphate resisting Portland cement-
IS 12468: 1988
General requirements for vibrators for mass concreting: Immersion type-
IS 3201: 1988
Criteria for design and construction of precast-trusses and purlins (First Revision)-
IS 269: 1989
Specification for 33 grade ordinary portland cement (fourth revision)-
IS 6452: 1989
Specification for high alumina cement for structural use-
IS 8042: 1989
White Portland Cement - Specification-
IS 8112: 1989
Specification for 43 grade ordinary Portland cement (First Revision)-
IS 12600: 1989
Specification for low heat Portland cement-
IS 6909: 1990
Specification for supersulphated cement-
IS 8041: 1990
Specification for rapid hardening Portaland cement (Second Revision)-
IS 1489: Part I&II-1991
Specification for portland pozzolana cement Part 1 & II 1991
IS 4031 Part 15: 1991
Methods of physical tests for hydraulic cement: Part 15 Determination of fineness by wet sieving-
IS 4634: 1991
Methods for testing performance of batch-type concrete mixers (First Revision)-
IS 8043: 1991
Specification for hydrophobic Porland cement (Second Re vision)-
IS 2505: 1992
Concrete vibrators - Immersion type - General requirements (Third Version)-
IS 13311: Part 1&:2 1992
Non-destructive testing of concrete : Part 1 & 2
IS 2430: 1996
Methods for sampling of aggregates for concrete (first revision)-
IS 383: 1999
Specification for coarse and fine aggregates from natural sources for concrete
IS 14687: 1999
Falsework for Concrete Structures - Guidelines-
IS 5816: 1999
Splitting Tensile Strength of Concrete Method of test (First Revision)-
IS 9103: 1999
Concrete Admixtures - Specification (First Revision)-
IS 456: 2000
Plain and reinforced concrete - Code of practice (third revision)-
SP 6(2) :1962
Steel beams and plate girders
SP 6(3) :1962
Steel columns and struts-
SP6(1):1964
Structural steel sections (revised)Guide for selection of Indian Standard structural shapes.Design tables for the use-
SP 6 (4) :1969
Use of high strength friction grip bolts (reaffirmed 1985) as a fabrication medium.
SP 6(6) :1972
Application of plastic theory in design of steel structures.
SP 6(7) :1972
Simple welded girders.
SP 12:1975
ISI Handbook for gas welders.
SP 6 (5) :1980
Cold-formed, light-gauge steel structures (first revision) provisions of IS:801 and also gives various design tables and design curves required in design of design of structures using light-gauge steel sections-
SP 22: 1982
Explanatory handbook on codas for earthquake engineering
49 Special Publication
SP 23.1982
Handbook on concrete mixes (based on Indian Standards)
SP 7:1983
National building code of India 1983 (first revision)
SP 7:1983 Group 1
For architectsPart II Administration Part III Development control rules, and general building requirements Part IV Fire protection (Amendment 3) Part V Building material Part X Signs and outdoor display structures
SP 7:1983 Group 3
For Construction engineers Part VII Construction practices and safety-
SP 7:1983 Group 4
For building services engineers Part VIII Building services Section 1 Lighting and ventilation Section 2 Electrical installations Section 3 Air conditioning and heating Section 4 Acoustics, sound insulation and noise control Section 5 Insta llation of lift
Page 10
Mannual V Code No &
Public Works Department Name of Code/Manual Related with
Year
2
1
SP 21(S & T):1983
For plumbing services engineers Part IX Plumbing services Section 1 Water supply Section 2 Drainage end sanitation Section 3 Gas supply-SP 7:1983 Group 5 Plumbing services Section 1 Water supply Section 2 Drainage end sanitation Section 3 Gas supply Summaries of India Standards for building materials. (except standards relating to paints )
SP 25:1984
Handbook on causes and prevention of cracks in building. Deals with the various causes of non-structural cracks.
SP 7:1983 Group 5
SP 32.1986
Handbook on functional requirements of industrial buildings (lighting and ventilation)
SP 36(Part 1):1987
Compendium of Indian Standards on soil engineering: Part 1 Laboratory testing of soils for civil engineering purposes.
SP 27:1987
Method of measurement of building works (firs t revision).
SP 33:1987
Handbook on timber engineering.
SP 34:1987
Handbook of concrete reinforcement and detailing (SCIP) (Amendment 1). wherever necessary.
SP 35(S & T):1987
Handbook on water supply and drainage with special emphasis on plumbing.This Handbook covers design, construction, maintenance, etc, of water supply system and various water disposal systems with special reference to water supply system waste water collection, transportation end disposal from domestic sanitation applicances.
SP 38 (S & T):1987
Handbook of typified designs for structures with steel roof trusses (with and without cranes) (based on IS codes).
SP 40 (S & T):1987
Handbook on structures with steel portal frames (without cranes).
SP 41(S & T):1987
Handbook on functional requirements of buildings (other than industrial buildings) (Parts 1-4)
SP 36(Part 1 &2):1988
Compendium of Indian Standards on soil engineering Part I & II SP 36 -1988
SP 47(S&T):1988
Handbook on structures with steel lattice portal frames
SP 20(S & T):1991
Handbook on masonry design and construction (first re vision).
SP 52:1992
Handbook on quality management. Indian Standards as IS 14000 series,
SP 57: 1993
Handbook on pipes and fittings for drinking water supply.
SP 62(S&T):1997
Handbook on building construction practices (excluding electrical work).
SP 63:1997
Explanatory guide for application of quality system standards (IS/ISO 9001 , 9002 and 9003).
SP 70:2001
Handbook on construction safety practices.Handbook on construction safety practices.
SP 6
ISI Handbook for structural engineers
Page 11
