251379294-SOR-Civil-Works-Assam-Pwd-Schedule-2013-14.pdf

Page-1

CH-1: EARTHWORK no

I t em

1.1

D e s c ri pt i on

R at e

U n it

EARTHWORK IN EXCAVATION

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level.

(a) In ordinary soil

Cum

Rs.108.82

(b) In hard/ dense soil

Cum

Rs.138.12

(c) In soft or laminated rock or medium shale

Cum

Rs.182.14

(d) In medium rock of hard shale (i) Using blasting materials

Cum

Rs.442.42

(ii)Withoutusingblastingmaterials

Cum

Rs.372.27

Cum

Rs.540.27

(e) In hard rock (i) Using blasting materials

1.2

(ii) Without using blasting materials (where blasting is not possible/ not

Cum

Rs.579.64

permissible) (B ) Ex tr aover item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Cum

Rs.30.79

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto depth a of 1.5 metre

Cum

(b) Above 1.5 m upto 3.00 m depth

1.3

Ch-1 : Earth Work

Rs.75.38 Cum

Rs.78.89

(c) Above 3.00 m upto 4.50 m depth

Cum

Rs.80.62

(d) Above 4.50 m upto 6.00 m depth

Cum

Rs.82.24

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m

Cum

Rs.105.25

(i) Extra for each 30m lead or part thereof beyond the initial lead of 90m (by head load)

Cum

Rs.13.92

(ii) Extra for each 1.5m lift or part thereof beyond the initial lift of 2.00m (by head load)

Cum

Rs.6.96

(b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.

Cum

Rs.333.77

(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Cum

Rs.345.61

Page-2

no

I t em

1.4

D e s c ri pt i on

R at e

U n it

(d) With stone dust obtained by truck carriage including loading and unloading to the site of work.

Cum

Rs.428.51

(e) Extra cost for lifting of sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Cum

Rs.15.30

Rais in g low si tearound the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.

(a) Within Guwahati city only

Cum

Rs.276.81

(b) Other than Guwahati city

Cum

Rs.210.20

1.5

Earth work in excavation in slushy/ marshy soil, decomposed organic matter mixed with brickbats, broken glass panes, broken earthen pots etc. removal of stumps and other deleterious matter in the proposed building site including constant water pumping for bailing out water as directed including return filling and ramming after completion of work with good quality earth (measurement will be on the basis of profile or section measurement).

Cum

Rs.236.24

1.6

Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water,

Cum

Rs.764.30

Cum

Rs.7.04

1.7

Ch-1 : Earth Work

ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary. Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km.

Page-3

CH-2: CEMENT CONCRETE WORKS Item D e s cr i pt i on no 2.1 PLAIN CEMENT CONCRETE WORKS

U n it

R at e

2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

cum

Rs.4,292.86

(b) In prop 1cement: 4 sand :8 coarse aggregate by volume

cum

Rs.3,890.61

(c) In prop 1cement: 5 sand :10 coarse aggregate by volume

cum

Rs.3,569.75

(d) In prop 1cement: 6 sand :12 coarse aggregate by volume

cum

Rs.3,366.38

a) 35mm thick

sqm

Rs.193.90

b) 50mm thick

sqm

Rs.253.28

c) 100mm thick

sqm

Rs.491.91

sqm

Rs.181.99

(a) 35mm thick

sqm

Rs.192.13

(b) 50mm thick

sqm

Rs.253.64

2.1.2 Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.

2.1.3 Providing and laying 25 mm th ick damp pr oof cour se with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing

approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. 2.1.4 Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately).

2. 2

RE IN FO RC ED CE ME NT C ON CR ET E WOR KS

2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

cum

N) Without using admixture, plasticiser

a) M15 grade concrete or Prop. 1:2:4

cum

Rs.5,496.65

b) M20 grade concrete or Prop. 1:1.5:3

cum

Rs.6,063.65

c) M25 grade concrete

cum

Rs.6,603.01

d) M30 grade concrete

cum

Rs.6,672.15

e) M35 grade concrete

cum

Rs.6,801.22

P) Using admixture, plasticiser etc for air entraining, water reducing purposes

including required. addition of agent for changing normal setting time of concrete as

Ch-2 : Cement Concrete Work

Page-4

Item no

D e s cr i pt i on

U n it

R at e


cum

Rs.5,717.17


cum

Rs.6,329.48


cum

Rs.6,911.89


cum

Rs.6,986.58


cum

Rs.7,125.95


cum

Rs.5,668.82


cum

Rs.6,241.39


cum

Rs.6,786.00


cum

Rs.6,855.86


cum

Rs.6,986.19


cum

Rs.5,889.34


cum

Rs.6,507.22


cum

Rs.7,094.88


cum

Rs.7,170.29


cum

Rs.7,310.92


cum

Rs.5,758.89


cum

Rs.6,331.46


cum cum

Rs.6,876.08 Rs.6,945.94


cum

Rs.7,076.26

(B) In super structure from plinth level up to 1st floor level. i) Walls(thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. N) Without using admixture, plasticiser

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

ii) Col umns, pil lar s, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser


P) Using admixture, plasticiser etc


Rs. 5,979.41


Rs. 6,597.29


Rs. 7,184.96


Rs. 7,260.37


Rs. 7,400.99

ii i) Vert ical and hori zont al fi ns (thickness not more than 100mm) individually or forming box louvre and projected band. N) Without using admixture, plasticiser



cum

Rs.6,202.05

Page-5

Item no

D e s cr i pt i on

U n it

R at e


cum

Rs.6,774.62


cum

Rs.7,319.24


cum

Rs.7,389.09


cum

Rs.7,519.42



Rs. 6,422.57


Rs. 7,040.45


Rs. 7,628.12


Rs. 7,703.52


Rs. 7,844.15

iv) On domes, vaults and shell roof N) Without using admixture, plasticiser


cum

Rs.6,328.84


cum

Rs.6,906.96


cum

Rs.7,456.88


cum

Rs.7,527.39


cum

Rs.7,658.99


cum

Rs.6,549.36


cum

Rs.7,172.79


cum

Rs.7,765.76


cum

Rs.7,841.82


cum

Rs.7,983.72


cum

Rs.5,812.96


cum

Rs.6,363.40


cum cum

Rs.6,886.98 Rs.6,954.11


cum

Rs.7,079.41

f) M40 grade concrete (PSC Grade)

cum

Rs.7,173.39

g) M45 grade concrete (PSC Grade)

cum

Rs.7,504.54

h) M50 grade concrete (PSC Grade)

cum

Rs.7,737.24

i) M55 grade concrete (PSC Grade)

cum

Rs.8,104.20


cum

Rs.6,033.48


cum

Rs.6,629.23


cum

Rs.7,195.86


cum

Rs.7,268.54


II. Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concrete Pump N) Without using admixture, plasticiser




Page-6

Item no

D e s cr i pt i on

U n it

R at e


cum

Rs.7,404.14


cum

Rs.7,505.85


cum

Rs.7,864.24


cum

Rs.8,116.09


cum

Rs.8,513.23


cum

Rs.220.52


cum

Rs.265.83


cum

Rs.308.88


cum

Rs.314.43


cum

Rs.324.73


cum

Rs.332.46


cum

Rs.359.70


cum

Rs.409.03


cum

Rs.378.85

cum

Rs.306.19

2.2.2 Extra for using plasticiser in concrete if admixture, plasticiser etc are not included

in the item rate

2 .2 .3

Ex t ra over i te m Nos. 2. 2. 1 (I )),(Babove for each subsequent floor or part thereof

above the 1st floor level.


Page-7

CH-3: SHUTTERING WORKS Item No.

3.1

Description

U ni t

R at e

TIMBER SHUTTERING (FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. 3.1.1

(a) Using 38mm thick plank

Sqm

Rs.276.07

(b) Using 25mm thick plank

Sqm

Rs.252.24

(a) Using 38mm thick plank

Sqm

Rs.364.29

(b) Using 25mm thick plank

Sqm

Rs.341.90

Sqm

Rs.394.81

Sqm

Rs.364.01

Sqm

Rs.531.15

(i) Using 38mm thick plank

Sqm

Rs.212.37

(ii) Using 25mm thick plank

Sqm

Rs.202.44

Sqm

Rs.377.93


Sqm

Rs.452.94


Sqm

Rs.429.93

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level.

3.1.1.3 Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (i) Using 38mm thick plank (ii) Using 25mm thick plank (b) Circular or curved in plan (Using 38mm thick plank) 3.1.1.4 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

(b) For depth exceeding 1.0M (Using 38mm thick plank). 3.1.1.5 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

(b) Floors etc. above 200mm in thickness (Using 38mm thick plank). Sqm

Rs.492.38

Sqm

Rs.10,526.85

Sqm

Rs.512.08

Sqm

Rs.489.24


Sqm

Rs.785.13


Sqm

Rs.744.95

3.1.1.6 In Ribbed/ waffle slab including rib beams (measurements to be taken on flat surface) (Using 38mm thick plank) 3.1.1.7 Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside. (i) Using 38mm thick plank (ii) Using 25mm thick plank (b) Where inclination to horizontal plane exceeds 30 degrees where shuttering may be provided both on under side & upper side, if required.

Ch-3 : Shuttering Work

Page-8

Item Description No. 3.1.1.8 Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.

U ni t

R at e


Sqm

Rs.326.05


Sqm

Rs.303.19

Sqm Sqm

Rs.466.24 Rs.441.68

Sqm

Rs.496.80

Sqm

Rs.2,626.95

Sqm

Rs.5,483.35

Sqm

Rs.43.10

(a) Thickness not exceeding 200mm.

R.M.

Rs.178.37

(b) Thickness exceeding 200mm.

Sqm

Rs.823.21

3.1.4

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b).

Sqm

Rs.23.19

3.1.5

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.3(a).

R.M.

Rs.4.64

Sqm

Rs.278.61

(a) For depth not exceeding 1.0M.

Sqm

Rs.231.00

(b) For depth exceeding 1.0M.

Sqm

Rs.280.86

Sqm

Rs.345.67

Sqm

Rs.379.50

Sqm

Rs.10,222.84

Sqm

Rs.383.09

3.1.1.9 Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. (i) Using 38mm thick plank (ii) Using 25mm thick plank 3.1.1.10 Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) 3.1.1.11 Arches/ slabs having curved surface in one direction. (Using 38mm thick plank) 3.1.1.12 Domes, Vaults and shell roofs having curved surface in both directions (only area of the underside shall be measured for payment). (Using 38mm thick plank) 3.1.2

Extra for each subsequent 1.0M height or part thereof beyond the initial height of 4.0M as mentioned in item no. 3.1.1

3.1.3

Providing form work of ordinary timber planking and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.

3. 2 3.2.1

PL YB OA RD SH UT TE RI NG (FO RM WO RK ) Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face 3.2.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

3.2.1.3 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, cha as, balconies and the like. (a) Floors etc. upto 200mm in thickness. (b) Floors etc. above 200mm in thickness. 3.2.1.4 In Ribbed/ waffle slab including rib beams (measurements to be taken on flat surface) 3.2.1.5 Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside.


Page-9

Item No.

Description

(b) Where inclination to horizontal plane exceeds 30o where shuttering may be provided both on under side & upper side, if required.

U ni t

Sqm

3.2.1.6 Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like. Sqm 3.2.1.7 Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.

3.2.3

3.2.4 3.2.5 3.3

Rs.573.00

Rs.225.65

Sqm

Rs.318.23

Sqm

Rs.390.30

Sqm

Rs.39.82

(a) Thickness not exceeding 200mm.

R.M.

Rs.171.87

(b) Thickness exceeding 200mm.

Sqm

Rs.774.22

Sqm

Rs.23.19

R.M.

Rs.4.64

Sqm

Rs.116.95

Sqm

Rs.115.42

Sqm

Rs.142.53

Sqm

Rs.140.38

Sqm

Rs.157.78

Sqm

Rs.143.23

3.2.1.8 Staircase with sloping or stepped soffits including risers and stringers but excluding 3.2.2

R at e

Landing. Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1 Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.3(a). S T E ESL H U T T E R I N G :

3.3.1

Providing formwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in: 3.3.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face 3.3.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders and bressumers. 3.3.1.3 Flat Surfaces such as soffits of suspended floors, roofs, landings and the like. 3.3.1.4 Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside. (b) Where inclination to horizontal plane exceeds 30o where shuttering may be provided both on under side & upper side, if required. 3.3.1.5 Vertical surface such as walls (any thickness), Lift shafts, partitions and the like including attached pilasters, butresses, plinth and string courses and the like. 3.3.2

Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1

Sqm

Rs.23.42

3.3.3

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.4.1

Sqm

Rs.25.69

Sqm

Rs.1,084.16

3.4 L&T DOKA FORMWORK SYSTEM

3.4.1

Providing formwork using L&T-Doka formwork system with 12mm thick Plywood Board sheathing supported by timber H-beams and steel props with tripods including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in:

3.4.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face


Page-10

Item Description No. 3.4.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders and bressumers.

U ni t

R at e

(a) Using Flex system for height of propping and centering below supporting floor to ceiling upto 4.5m

Sqm

Rs.553.72

(b) Using H.D.T. system for height of propping and centering below supporting floor to ceiling exceeding 4.5m and upto 6.0m.

Sqm

Rs.4,702.83

(a) Using Flex system for height of propping and centering below supporting floor to ceiling upto 4.5m

Sqm

Rs.539.15

(b) Using H.D.T. system for height of propping and centering below supporting floor to ceiling exceeding 4.5m and upto 6.0m.

Sqm

Rs.4,725.44

3.4.1.4 In Ribbed/ waffle slab including rib beams (measurements to be taken on flat surface)

Sqm

Rs.991.26

(a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside.

Sqm

Rs.571.91

(b) Where inclination to horizontal plane exceeds 30o where shuttering may be provided both on under side & upper side, if required.

Sqm

Rs.703.58

including attached pilasters, butresses, plinth and string courses and the like.

Sqm

Rs.1,570.12

3.4.2

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.4.1

Sqm

Rs.26.28

3.4.3

Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure).

Sqm

Rs.50.22

3.4.1.3 Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

3.4.1.5 Sloping or Battering sufaces such as sloped slabs etc. including folded plates.

3.4.1.6 Vertical surface such as walls (any thickness), Lift shafts, partitions and the like


Page-11

Ch-4: MASONARY WORK Item No.

Description

Unit

Rate

4.1.1 Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Sqm

Rs. 368.71

(b).Brick on edge soling (c).Stonesolingofthickness150mm.

Sqm Sqm

Rs. 532.75 Rs.217.83

4.1.2 Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Cum

Rs.4,323.17

4.1.3 Extra cost for lifting of brickbats and sand for f i l l i n g of s u n k f l oo rfor each subsequent floors above the ground floor as directed and specified.

Cum

Rs.154.61

4.1.4 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary

(a) In proportion 1:3.

Cum

Rs. 6,045.24

(b) In proportion 1:4.

Cum

Rs. 5,860.86

(c) In proportion 1:5.

Cum

Rs. 5,630.36

(d) In proportion 1:6. (e) In proportion 1:1:6 (1 cement:1 lime: 6 sand)

Cum

Rs.5,515.11 Rs. 5,681.90

(f) In proportion 1:1:9. (1 cement:1 lime: 9 sand)

Cum

Rs.5,438.21

(a) In proportion 1:3.(1 cement:3 sand)

Cum

Rs.6,211.75

(b) In proportion 1:4.(1 cement:4 sand)

Cum

Rs.6,027.36

(c) In proportion 1:5.(1 cement:5 sand)

Cum

Rs.5,796.87

(d) In proportion 1:6.(1 cement:6 sand)

Cum

Rs.5,681.61

(e) In proportion 1:1:6.(1 cement: 1 Lime :6 sand)

Cum

Rs.5,848.41

(f) In proportion 1:1:9.(1 cement: 1 Lime :9 sand)

Cum

Rs.5,604.71

Cum

Rs.260.27

(II) In superstructure above plinth level up to 1st floor level.

4.1.5 Extra over item no. 4.1.5 above for brick work in each subsequent floor or part thereof above 1st floor level. in cement morter with 1st class brick including racking out 4.1.6 23 0m m th ick brick wall joints and curing complete as directed in structure (I) In Sub-structure upto plinth level including dewatering if necessary

(a). In proportion 1:3.

Sqm

Rs. 1,390.26

(b). In proportion 1:4.

Sqm

Rs. 1,347.85

(c). In proportion 1:5.

Sqm

(d).Inproportion1:6.Analysisfor1m3

Sqm

Rs. 1,294.84 Rs.1,268.10

(II) In superstructure above plinth level up to 1st floor level.

(a).Inproportion1:3.(1cement:3sand)

Ch-4 : Masonry Work

Sqm

Rs.1,428.74

(b).Inproportion1:4.(1cement:4sand)

Sqm

Rs.1,386.33

(c).Inproportion1:5.(1cement:5sand)

Sqm

Rs.1,333.31

(d).Inproportion1:6.(1cement:6sand)

Sqm

Rs.1,306.58

Page-12

Item No.

Description

Unit

4.1.7 Extra over item no. 4.1.6 (II) above for brick work in each subsequent floor or part thereof above 1st floor level.

Rate

Sqm

Rs.59.71

(a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Sqm

Rs.653.01

(b) In cement mortar in proportion 1:5. (1 cement:5 sand)

Sqm

Rs.635.49

(c) In cement mortar in proportion 1:6. (1 cement : 6 sand) (B) 75 mmthick wall

Sqm

Rs.620.28

Sqm

Rs.486.60

Sqm

Rs.464.48

Sqm

Rs.452.03

ll prop 1:5 reinforced with two lines of M.S 4.1.9 11 2 mm th ic k rein forced brick wain rod/ Tor steel as specified embeded in 38 mm thick concrete course in prop.1:2:4 with coarse agg. 12mm down at every fourth courses embeded with protruding rod in column including curing etc.complete as directed ( M.S rod/Tor steel shall be measured and paid separately) in super structure above plinth up to 1st floor level.

Sqm

Rs.730.00

ll prop 1:5 reinforced with one line of M.S rod/ 4.1.10 75 mm th ick rein forc ed brick wain Tor steel as specified embeded in 28 mm thick concrete course in prop.1:2:4 with coarse agg. 12mm down at every third course embedded with protruding rod in column complete as directed (M.S rod / Tor steel shall be measured and paid separately) in super structure up to 1st floor level.

Sqm

Rs.520.68

ll cement mortar including racking out joints and curing 4.1.8 1s t cl as s brick nogge d wain complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mmthick brick wall

(a) In cement mortar in proportion 1:3. (b) In cement mortar in proportion 1:4. (1 cement: 4 sand) (c) In cement mortar in proportion 1:5.

(1 cement:3 sand)

(1 cement: 5 sand)

4.1.11 Brick wall in cement lime mortar in prop. 1 cement: 1 lime putty: 6 fine sand including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level ( protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) a) 112mm thick brick wall

Sqm

Rs. 645.17

b) 75mm thick brick wall

Sqm

Rs. 445.41

4.1.12 1st class brick nogged wall in lime mortar in prop. 1 lime : 2 fine sand including racking out joints and curing etc complete as directed ( protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately) in super structure up to 1st floor level. a) 112mm thick brick wall

Sqm

Rs. 640.32

b) 75mm thick brick wall

Sqm

Rs. 452.69

4.1.13 R.B walling in prop.1:3 reinforced with H.B wire netting made of 20 Gauge G.I wire (diamond shape) in walls, railings, drop walls, parapet, fins, bands, mullions from ground floor level in superstructure up to 1st floor level including racking out joints and curing etc complete as directed (Protruding rods of columns to be tied with H.B. wire netting) (a) 112 mm thick RB walls (b) 75 mm thick RB walls

Ch-4 : Masonry Work

Sqm Sqm

Rs. 824.98 Rs. 621.67

Page-13

Item No.

Description

Unit

Rate

4.1.14 Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.

4.2

(a) 112mm thick brick/ R.B wall

Sqm

Rs. 29.09

(b) 75 mm thick brick/R.B wall

Sqm

Rs. 21.43

STONE MASONARY WORK

4.2.1 Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (a) Random Rubble Masonry

Cum

Rs.2,574.55

(b) Coarse Rubble Masonry

Cum

Rs.2,672.81

Cum Cum

Rs. 7,540.66 Rs. 7,612.36

Cum

Rs.130.14

Sqm

Rs. 1,553.46

Sqm

Rs. 789.09

Sqm

Rs.59.71

4.3.5 1 0 0 m m t h i c k w a l l using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

Sqm

Rs.784.41

4.3.6 Extra for CC block walling on item no 4.3.5 for each subsequent floor or part thereof above the 1st floor level.

Sqm

Rs.14.55

4.3

Cellular Light Weight concrete Block work

4.3.1 Cell ul ar Concrete Bl ock work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (a) In Sub-structure upto plinth level including dewatering if necessary (b) In s uperstructure above plinth level up to 1st floor level.

4.3.2 Extra over item no.4.3.1 (b) above for CC Block work in each subsequent floor or part thereof above 1st floor level. 4.3.3 2 0 0 m m t h i c k w a l l using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed in structure (protruding rod is to be provided at every 3 course interval and will be measured and aid se aratel (a) In Sub-structure up to plinth level including dewatering if necessary (b) In Super structure above plinth level upto 1st floor level

4.3.4 Extra over item no.4.3.3 (b) above for CC block work in each subsequent floor or part thereof above 1st floor level.

Ch-4 : Masonry Work

Page-14

CHAPTER 5: FLOORING AND FLOOR FINISH I tem N o. 5.1

5.1.1

D es cr i pt i oo nw f or k s

U ni t

Rate

CEMENT CONCRETE FLOORING

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (a) 15 mm thick

Sq.m

Rs.226.67

(b) 20 mm thick

Sq.m

Rs.270.39

5.1.2

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.

Sq.m

Rs.225.26

5.1.3

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Sq.m

Rs.405.53

Sq.m

Rs.511.10

5.1.5

65 mm thick cement concrete floor consisting of 53 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 12 mm thick wearing coarse of cement sand plastering in prop. 1:2 laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Sq.m

Rs.510.06

5.1.6

40 mm thick red oxide floor with under layer of 30 mm thick cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of size 20 mm and down) and top layer of 10mm thick plaster of cement red-oxide of iron per 50 kg of cement in prop. 1:3 (1 cement red oxide: 3 coarse sand) finished with a floating

Sq.m

Rs.442.09

Sq.m

Rs.510.29

5.1.4

5.1.7

coat of neat cement red oxide mix of same proportion. Providing and laying 50mm thick C.C. floor with metallic concrete hardener topping under layer of 35 mm thick cement concrete in prop.1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed.

Ch-5 : Flooring Floor Finishing Works

Page-15

I tem N o.


U ni t

5.1.8

Providing and laying 65mm thick C.C. floor with metallic concrete hardener topping under layer of 50 mm thick cement concrete 1:2:4 (1cement:2 coarse sand:4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement: 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed.

5.1.9

Providing and fixing glass strips in joints of cement concrete flooring /Terrazo flooring in all level

Rate

Sq.m

Rs.621.47

(a) 25 mm wide

mm thick 4 (i)

R.m

Rs.27.88

mm thick 6(ii)

R.m

Rs.34.22

mm thick 4 (i)

R.m

Rs.35.23

mm thick 6(ii)

R.m

Rs.45.26

mm thick 4 (i)

R.m

Rs.40.56

mm thick 6(ii)

R.m

Rs.53.25

(d) 65 mm wide mm thick 4 (i)

R.m

Rs.48.20

mm thick 6(ii)

R.m

Rs.64.71

(b) 40 mm wide

(c) 50 mm wide

5.1.10 Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. mm 15 (a) thick mm (b) 20 thick

Sq.m

Rs.230.44

Sq.m

Rs.265.70

5.1.11 Red oxide plaster skirting with top layer of 5 mm thick cement plaster of cement mix using 3.5 kg. red oxide of iron per 50kg of cement in proportion 1:3 (1 cement: 3 coarse sand) finished with a floating coat of cement red oxide mix of same proportion.

5.2

5.2.1

5.2.2 5.3

(a) 15 mm thick with under layer of 10 mm thick cement plaster.

Sq.m

Rs.291.24

(b) 20 mm thick with under layer of 15 mm thick cement plaster.

Sq.m

Rs.397.19

(a) Any shade or combination of shades using white cement.

Sq.m

Rs.841.63

(b) Any shade or combination of shades using approx. 50% white cement 50% grey cement.

Sq.m

Rs.825.80

(c) Any shade or combination of shades using grey cement.

Sq.m

Rs.809.97

Extra over item no. 5.2.1 for rubbing and polishing the cement concrete tiles in

Sq.m

Rs.142.39

CEMENT CONCRETE TILE FLOORING

Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match th

flooring, skirting, dado etc. BRICK FLOORING


Page-16

I tem N o.


U ni t

Rate

5.3.1

Brick-on-edge floor with 1st class brick and grouted with cement mortar in prop.1:4 (1 cement : 4 sand) including cement pointing in proportion 1:1 (1 cement :1 sand) finishing and curing complete.

Sq.m

Rs.717.19

5.3.2

Brick-on-flat floor with 1st class brick and grouted with cement mortar in prop. 1:4 (1 cement : 4 sand) including 15 mm thick cement plastering in proportion 1:2 (1 cement : 2 sand) finishing with a floating coat of neat cement finish using cement slurry @ 2.75 kg. per sq. metre of floor area and curing complete.

Sq.m

Rs.672.06

Sq.m

Rs.2,887.70

(a) 38mm thick Hollock wood plank, butt jointed.

Sq.m

Rs.1,886.99

(b) 25mm thick Hollock wood plank, tongue, and groove jointed.

Sq.m

Rs.1,325.78

(c) 25mm thick Hollock wood plank, butt jointed.

Sq.m

Rs.1,287.72

(d) 38mm thick Sal wood plank, butt jointed

Sq.m

Rs.3,465.00

5.4

5.4.1

WOODEN FLOORING

Wooden planking in flooring including fixing to wooden base frame with necessary wood-screws complete (base of the wooden frame to be measured and paid separately.) With 38 mm thick Indian Teak wood plank, tongue and groove jointed.

5.4.2

Wooden planking in flooring including fixing to wooden frame with iron screws complete (base of the wooden frame to be measured and paid separately.)

(e) 25 mm thick Sal wood plank, butt jointed.

Sq.m

Rs.2,425.82

5.4.3

Supplying, fitting and fixing 38mm thick (finished size) wooden flooring with sal wood plank butt jointed, fitted on sal wood joist of size 100mm x 125mm spaced not more than 900mm apart fitted with 16mm dia bolt and nuts with iron clamp of 50mm x 5mm size inserting in the cement concrete floor base (floor base to be measured and paid separately) including providing 25mm thick damp proof course with water proofing compound as recommended by the manufacturer over C.C floor base including providing kiricide oiling two coats to the timber joists, underside of the flooring planks, two coats of anti-corrosive paint to the iron works, including providing ventilation gaps for the timber works of specified size (75mm x 75mm) covered with welded mesh fabrics at the face of the gap including dressing, levelling, finishing complete as specified and directed by the department at all levels (measurement shall be taken at the finished area of the works).

Sq.m

Rs.5,114.32

5.5 5.5.1

TERRAZO FLOORING 40 mm thick marble chips flooring rubbed and polished to granolithic finish with under layer of 32 mm thick cement concrete in prop. 1:2:4 (1 cement:2coarse sand:4 graded stone aggregate of 10 mm and down graded) and top layer 8 mm thick with marble chips of any colour or combination of colours and 1 mm to 4 mm nominal sizes laid in cement marble powder mix 3:1 (3 cement:1marble powder by weight) in proportion 4:7 (4cement marble powder mix :7 marble chips by volume ) including providing cement slurry including curing etc. complete.

(a) Pigment of any shade with ordinary cement in top layer only.

Sq.m

Rs.745.38

(b) Pigment of any light shade with white cement in top layer

Sq.m

Rs.758.14

(c) Pigment of any shade with approx. 50% white cement and 50% grey cement in to la er. (d) White cement without any pigment on top layer.

Sq.m

Rs.752.88

Sq.m

Rs.738.05

(e) Light shade pigment with ordinary cement on top layer

Sq.m

Rs.729.83


Page-17

I tem N o.

5.5.2

5.5.3

5.5.4

5.5.5

5.5.6 5.5.7


U ni t

Rate

40 mm thick marble chips flooring rubbed and polished to granolithic finish with under layer of 30 mm thick cement concrete in prop. 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate of 10 mm and down graded) and top layer 10 mm thick with marble chips of any colour or combination of colours of required sizes and 1 mm to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement:1marble powder by weight) in prop. 4:7 (4cement marble powder mix :7 marble chips by volume).


Sq.m

Rs.802.60


Sq.m

Rs.777.69

(c) Pigment of any shade with approx. 50% white cement and 50% grey cement in top layer.

Sq.m

Rs.842.07

(d) White cement without any pigment on top layer.

Sq.m

Rs.757.60

(a) Pigment of any shade with ordinary cement in top layer only. (b) Pigment of any light shade with white cement in top layer

Sq.m Sq.m

Rs.808.35 Rs.985.91

(c) Pigment of any shade with approx. 50% white cement and 50% grey cement in top layer. (d) White cement without any pigment on top layer.

Sq.m

Rs.930.11

Sq.m

Rs.871.68

Sq.m Sq.m Sq.m

Rs.908.24 Rs.941.63 Rs.920.68

Sq.m

Rs.905.24


Sq.m

Rs.509.92


Sq.m

Rs.596.13

(c) Pigment of any shade with approx. 50% white cement and 50% grey cement in top layer.

Sq.m

Rs.554.05

(d) White cement without any pigment on top layer. Providing and fixing aluminium strips of 40 mm wide and 1.5 mm thick in terrazo floors in item no. 5.5.1, 5.5.2, 5.5.3 and 5.5.4 .

Sq.m R.m

Rs.556.39 Rs.65.08

40 mm thick marble chips flooring rubbed and polished to granolithic finish with under layer of 28 mm thick cement concrete in prop. 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate of 10 mm and down graded) and top layer 12 mm thick with marble chips of any colour or combination of colours of required sizes 1 mm to 4 mm nominal sizes laid in cement marble powder mix 3:1 (3 cement : 1 marble powder by weight) in proportion 4:7 (4 cement marble powder mix :7 marble chips by volume).

40 mm thick marble chips flooring rubbed and polished to granolithic finish with under layer of 25 mm thick cement concrete in prop. 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate of 10 mm and down graded) and top layer 15 mm thick with marble chips of any colour or combination of colours of required sizes from 7 mm to 10 mm nominal sizes laid in cement marble powder mix 3:1 (3 cement:1marble powder by weight) in proportion 4:7 (4 cement marble powder mix :7 marble chips by volume ) (a) Pigment of any shade with ordinary cement in top layer only. (b) Pigment of any light shade with white cement in top layer (c) Pigment of any shade with approx. 50% white cement and 50% grey cement in top layer. (d) White cement without any pigment on top layer. 18 mm thick marble chips skirting or dado rubbed and polish to granolithic finish with under layer 12 mm thick in cement plaster in prop. 1:3 (1 cement :3 coarse sand) and top layer 6 mm thick with marble chips of any colour or combination of colours of 4 mm nominal size laid in cement marble powder mix 3:1( 3 cement : 1 marble powder by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips by volume)

Extra over item no.5.5.1,5.5.2, 5.5.3 and 5.5.4 for Terrazo floors laid as floor borders, margins and similar bands in different shade.


Page-18

I tem N o.


U ni t

Rate

(a) Exceeding 75mm but not exceeding 300 mm in width.

Sq.m

Rs.17.43

(b) In narrow band not exceeding 75 mm in width.

Sq.m

Rs.32.97

5.5.8

Extra over item nos. 5.5.1, 5.5.2, 5.5.3 and 5.5.4.for laying Terrazo flooring on stair case treads including the cost of forming noses.

Sq.m

Rs.23.08

5.5.9

Cutting and cleaning the existing mosaic floor with machine using acid and wax polishing the same as directed for all levels.

Sq.m

Rs.66.94

5.6 5.6.1

TERRAZO TILE FLOORING Pre-cast Terrazo tiles 20 mm thick with marble chips of sizes up to 6 mm laid in floors, treads of steps, landing with a bed of 10mm thick cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete.

Sq.m Sq.m Sq.m

Rs.1,242.77 Rs.1,227.06 Rs.1,208.80

(a) Using white cement

Sq.m

Rs.1,267.93

(b) Using 50% white cement and 50% ordinary cement. (c) Using ordinary cement

Sq.m Sq.m

Rs.1,252.22 Rs.1,236.51


Sq.m

Rs.1,267.93


Sq.m Sq.m

Rs.1,252.22 Rs.1,236.51


Sq.m

Rs.1,270.65


Sq.m Sq.m

Rs.1,227.06 Rs.1,221.17

(a) With precast tiles of any approved shade / shades using white cement. (b) Using 50% white cement and 50% ordinary cement. (c) Using ordinary cement 5.6.2

5.6.3

5.6.4

Pre-cast Terrazzo tiles 20 mm thick with marble chips of sizes up to 6 mm laid in skirting and rises of steps with 10mm thick cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry including rubbing and polishing complete. with tiles of any approved shade/shades.

Pre-cast Terrazo tiles 20 mm thick with marble chips of sizes up to 6 mm fixed on walls with 10 mm thick cement plaster in proportion1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry including rubbing and polishing complete with tiles of any approved shade / shades (walls means both exterior and interior walls)

Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades.

5.7 5.7.1

TILES WORKS CERAMIC TILES A) ON FLOOR


Page-19

I tem N o.


U ni t

Rate

5.7.1.1 Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a)

Normal range Somany/ Orient/Nitco /Asian Make

i)

Of size 300mmx300mm and above

Sq.m

Rs.680.00

ii)


Sq.m

Rs.720.00

b)

Executive range Somany/ Orient/Nitco/Asian Make

i)


Sq.m

Rs.750.00

ii)

Of size 400x400 mm and above

Sq.m

Rs.760.00

c)

Delux range Somany/ Orient/Nitco/Qutone Make

i)


Sq.m

Rs.970.00

ii)


Sq.m

Rs.980.00

iii)


Sq.m

Rs.990.00

i) Of size 200mmx200mm and above

Sq.m

Rs.694.00

ii) Of size 200mmx300mm and above

Sq.m

Rs.640.00


Sq.m

Rs.715.00


Sq.m

Rs.855.00

iii) Of size 148.5mmx450mm and above

Sq.m

Rs.870.00


Sq.m

Rs.924.33


Sq.m

Rs.931.53

iii) Of size 250mmx500mm and above

Sq.m

Rs.1,894.44

iv) Of size 300mmx600mm and above

Sq.m

Rs.1,545.91

v) Of size 300mmx900mm and above

Sq.m

Rs.2,217.81

B) ON WALLS 5.7.1.2 Providing polished c er a m i c w al l t i l es of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make

b) Executive range Somany/ Orient/Nitco/Asian Make

c) Delux range Somany/ Orient/Nitco/Varmora Make

5.7.2

VITRIFIED TILES


Page-20

I tem N o.


U ni t

Rate

A) ON FLOOR

5.7.2.1 Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, completewith at all levels specified directed. should be in conformity colour ofastiles and as and approved and (Coloured directed bypigment the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 400mmx400mm and above

Sq.m

Rs.1,712.50


Sq.m

Rs.1,483.13

Sq.m

Rs.1,525.18

Sq.m

Rs.2,116.23

Sq.m

Rs.2,399.00


Sq.m

Rs.1,311.67

ii) Of size150mmx605mm and above (Strips)

Sq.m

Rs.1,902.79

iii) Of size300mmx600mm and above

Sq.m

Rs.1,630.64

iv) Of size300mmx900mm and above CONCRETE TILES

Sq.m

Rs.2,626.68

i). Well, Chocolate, Diamond Square, Ramp, Beach Sand (300x300) mm

Sq.m

Rs.884.47

ii). Old Castle (455x455) mm

Sq.m

Rs.1,023.33

iii). Banana (370x140) mm

Sq.m

Rs.982.19

b) Executive range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 800mmx800mm and above c) Delux range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 1000mmx1000mm and above ii) Of size 1200mmx1600mm and above B) ON WALLS 5.7.2.2 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

5.7.3

(A) FLOOR TILES

5.7.3.1

Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the De artment . (a) SUNROCKHi CTS TILES


Page-21

I tem N o.


U ni t

Rate

(b) MULTIWYN TILES

Legato, Ribbera, Matrix, Esquire, Enigma, Flora, Little Flora, Nirvana, Purl, Contoura, Cobble, Canaletta, Nexus, Koral

Sq.m

Rs.1,045.19

5.7.3.2 Providing Transporating to site,laying,fitting and fixing at all levels tiles for following purpose of SUNROCK-Hi-CTStiles of high density cement concrete designer coloured tiles made of 100% pure white cement tested as per IS-12371980 of approved quality,size shape of thickness 5mm to 50mm to be ancored by adhesive cement and copper wire anchoring including cutting where necessary finished with flush pointing with polymer modified cementations tile joint filler of "ROOF RAINBOW TILE MATE-140" white cement slurry mixed with approved pigment to match shade of tiles complete as specified and directed.(Coloured pigment should be in conformity with color of tiles and as approved and directed by the department. (Cloud, Wave, Old Rock, English Stone)

Sq.m

Rs.1,119.77

Providing polished MULTIWYN tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and

Sq.m

Rs.1,045.19

(a) Silicon (Pavers) 60 mm thick

Sq.m

Rs.1,258.63

(b) Silicon (Pavers) 50 mm thick

Sq.m

Rs.1,119.77

(c) Silicon (Pavers) 40 mm thick

Sq.m

Rs.982.19

Sq.m

Rs.1,045.19

i) Ivory (300x300) mm

Sq.m

Rs.773.90

ii) Grey, Terracotta, Green (300x300) mm

Sq.m

Rs.843.33

iii) Jesalmer (300x300) mm

Sq.m

Rs.871.62

Sq.m

Rs.1,131.64

(B) WALL TILES

5.7.3.3

directed by the Department). (Walls means both interior and exterior walls). (Willow, Brick, Marvel, Sigma, Enamora, Pyramid, Crocotile, Bricket, Denver) (C) PAVERS

5.7.3.4 Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) SUN ROCK HIGH CTS Tiles (Pavers)

(B) MULTIWYN Tiles (Pavers)

Patella, West wind, Harringbone, Flexi, Super (C) VITA Tiles (Pavers)

5.8 5.8.1

KOTA STONE SLAB / SAND STONE FLOORING

Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (1) 550mm x 550mm


Page-22

I tem N o.


(2) 600mm x 900mm and above 5.8.2

5.8.3

U ni t

Rate

Sq.m

Rs.1,374.76

(1) 550mm x 550mm

Sq.m

Rs.1,128.55

(2) 600mm x 900mm and above

Sq.m

Rs.1,387.12

(i) 25 mm thick

Sq.m

Rs.1,316.48

(ii) 40 mm thick

Sq.m

Rs.2,218.72

Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone.

R.m

Rs.145.85

(i) Dungri slab

Sq.m

Rs.3,960.89

(i) Marwat Slab

Sq.m

Rs.1,891.07

(III) Kumari Slab

Sq.m

Rs.1,540.12

(IV) Rajnagar Slab

Sq.m

Rs.1,610.84

(i) Dungri slab

Sq.m

Rs.1,438.70

(ii) Marwat Marble

Sq.m

Rs.1,323.95

(iii) Kumari Marble

Sq.m

Rs.1,066.40

(iv) Rajnagar Marble

Sq.m

Rs.1,151.81

(i) Dungri slab

Sq.m

Rs.1,251.89

(ii) Marwat Marble

Sq.m

Rs.1,109.10

(iii) Kumari Marble

Sq.m

Rs.964.99


Sq.m

Rs.1,023.70

(c) With 18mm thick marble stone tiles of size 300mm x 300mm (i) Dungri slab

Sq.m

Rs.1,181.16

(ii) Marwat Marble

Sq.m

Rs.1,037.05

(iii) Kumari Marble

Sq.m

Rs.936.96

Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

Fine dressed and rubbed stone slab flooring over 18 mm thick base of cement mortar 1:5 (1cement : 5 coarse sand) with joints 3 mm wide, sides buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigments to match the shade of stone and pointing with the same mortar. Red sand stone

5.8.4 5.9

5.9.1

MARBLE FLOORING

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.

5.9.2

18 mm thick marble stone tiles in flooring including risers and treads of steps, skirting, dado, walls, pillars laid with 10 mm thick base of cement plaster in prop.1:3 ( I cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels. (a) With 18mm thick marble stone tiles of size 600mm x 600 mm

(b) With 18mm thick marble stone tiles of size 600mm x 450 mm, 600mm x 300mm


Page-23

I tem N o.


U ni t

Rate


Sq.m

Rs.966.32

5.9.3.

18 mm thick Makrana white marble stone tiles of size 600mm x 450mm in flooring including risers and treads of steps, skirting, nosing of treads, dado, walls, pillars laid with 10 mm thick base of cement plaster in prop.1:3 ( I cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels.(For using Makrana slab, prior permission should be taken from The Chief Engineer, PWD(Bldg.) and rate

Sq.m

Rs.3,334.91

5.9.4. 5.10 5.10.1

should beGranite approved before use) slab / tiles at all levels. Extra for finish in marble GRANITE FLOORING Providing polished granite tiles of approved quality, size and shape and thickness not less than 8mm, on walls over 15mm thick, cement mortar bed in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary, finished with flush pointing on wall with ordinary cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed.

Sq.m

Rs.227.69

Sq.m

Rs.1,157.36

5.10.2 Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.

Sq.m

Rs.2,443.02

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Sq.m

Rs.2,261.22

(ii) With White cement

Sq.m

Rs.2,229.16


Sq.m

Rs.1,150.26


Sq.m

Rs.1,168.92

5.10.3 Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mmmortar on floors, skirtings, risers and :treads of steps 15 mm thick base of cement in prop. 1:3 (1 cement 3 coarse sand )over including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

5.10.4 Providing polished granite tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

5.10.5 Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).


Page-24

I tem N o.


U ni t

Rate

(i) Normal Quality


Sq.m

Rs.2,246.07


Sq.m

Rs.2,228.58


Sq.m

Rs.2,661.63


Sq.m

Rs.2,644.14


Sq.m

Rs.3,350.38


Sq.m

Rs.3,332.89

Sq.m

Rs.695.47

Sq.m

Rs.660.75

a) Deluxe -VC

Sq.m

Rs.1,015.62

b) Deluxe -Rotto VC

Sq.m

Rs.1,015.62

a). Premium

Sq.m

Rs.968.05

b). Deluxe

Sq.m

Rs.984.76

Sq.m

Rs.1,700.93

a). Imperia Series- Gres Tiles

Sq.m

Rs.1,230.34

b). Imperia Series- Gres Lepato (1), Gres Lepato (2), Gres Lepato + Full Body

Sq.m

Rs.1,286.92

c). Tuscan Series- Gres Lepato

Sq.m

Rs.1,493.92

d). Tuscan Series- Gres Tiles

Sq.m

Rs.1,313.92

e). PVT- Hi Polish- PGVT

Sq.m

Rs.1,604.50

Sq.m

Rs.1,419.35

(i) Executive Quality

(iii) Deluxe Quality

5.11 5.11.1

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar P ink, Burj Brown, Burj Green, Burj Slate ii)Executive range-1 (Sizes 400 mm x 400mm and above) (a) Somany made- VC Shield (Group- 25) (406x406) mm Deluxe -VC iii)Executive range-2 (Sizes 600 mm x 600mm and above) Somany made- VC Shield (Group- 25) (605x605) mm

5.11.2

VITRIFIED i)Normal range (Sizes 300 mm x 300mm and above) Somany made- Durastone (Unpolished heavy duty Vitrified Tiles)

ii)Executive range-1 (Sizes 600 mm x 300mm and above)

a) Nitco made (Oak Wood) iii)Executive range-2 (Sizes 600 mm x600mm and above) i) Nitco made

ii) Somany made- Duragres (Glazed Vitrified Tiles) (605x605) mm

a). Gress Matt


Page-25

I tem N o.


U ni t

Rate

b). Gress Stone

Sq.m

Rs.1,544.07

c). Gress VC Shield

Sq.m

Rs.1,544.07

WO OD EN LA M IN A TE D FL OO R IN G/E NGIN EE R ED WO OD FL OO R IN G/C AR PE T TILES/LOOP PILE CARPETS/DECORATIVE GRASS/LANDSCAPING TURF 5.12.1 Providing,fitting and fixing Loop pile carpet from Uniproducts (India) Ltd.of thickness not less than 4mm with maximum 7mm pile height with pile fibre of 100% BCF polypropelene of width 3.66m laid on existing concrete floor with

5.12

approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified i) Melody Brand

Sq.m

Rs.1,286.00

ii) Aspire Brand

Sq.m

Rs.1,149.70

iii) Flute/Rainbow Brand

Sq.m

Rs.1,190.46

iv) Sonata/Splendour Brand

Sq.m

Rs.1,489.80

v) Trump Brand

Sq.m

Rs.1,717.80

vi) Harmony Brand

Sq.m

Rs.1,762.38

vii) Galaxy Brand

Sq.m

Rs.1,601.89

viii) New Royal Guard Brand

Sq.m

Rs.1,543.30

viii) Trump (Grey) Brand

Sq.m

Rs.1,035.06

ix) Basic Brand

Sq.m

Rs.726.81

ix) Piano Brand

Sq.m

Rs.1,068.18

i) SNM-102

Sq.m

Rs.1,495.48

ii) SNM-152

Sq.m

Rs.1,738.77

i) Lawn 66(18)

Sq.m

Rs.3,044.38

ii) Field 12

Sq.m

Rs.2,801.09

iii) Lawn 66(29)

Sq.m

Rs.3,644.32

iii) HT PA 13nd

Sq.m

Rs.4,896.43

5.12.2 Providing,fitting and fixing Synthetic Decorative Grass/Landscaping Turf of width 4.00m from Uniproducts (India) Ltd.of thickness not less than 10mm laid on existing concrete floor complete as directed and specified. (A) Decorative Grass from Uniproducts(India) Ltd.

(B) Landscaping Turf from Uniproducts(India) Ltd.

5.12.3 Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specified Engineered Wood (New) from Uniproducts(India) Ltd. i) Walnut Brand

Sq.m

Rs.8,824.86

ii) Merbau/Jatoba/Cherry Brand

Sq.m

Rs.8,047.47

iii) Oak Brand

Sq.m

Rs.6,755.60

5.12.4 Providing,fitting and fixing Laminated abrasion resistant wooden flooring from Uniproducts (India) Ltd.of thickness not less than 8.2mml laid on existing concrete floor with underlayer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified Laminate Floorings-A from Uniproducts(India) Ltd.


Page-26

I tem N o.


U ni t

Rate

i) Unitex AC3 Brand

Sq.m

Rs.1,562.40

ii) Unitex AC4 Brand

Sq.m

Rs.1,576.10

Carpet Tiles from Uniproducts(India) Ltd. i) Ultimate Brand

Sq.m

Rs.1,962.94

ii) Essential Plus Brand

Sq.m

Rs.1,403.76

iii) Coral Brand

Sq.m

Rs.1,247.39

iv) Tetris/Firkin Brand

Sq.m

Rs.2,636.76

v) Junction Brand

Sq.m

Rs.2,327.23

vi) Highway Brand

Sq.m

Rs.2,080.12

vii) Insight Brand

Sq.m

Rs.2,226.61

viii) Zebra/Hendriki/Tristis/Kuda Brand

Sq.m

Rs.1,947.65

ix) Pearl/Sapphire Brand

Sq.m

Rs.1,675.07

5.12.5 Providing,fitting and fixing Carpet tiles of size 500x500mm with thickness not less than 4mm made of 100% Olefin Polypropleyne material,with dual backing; Primary backing with PVC and Secondary with Reinforced Fibre glass from Uniproducts (India) Ltd.laid on existing concrete floor complete as directed and specified

x) Ural Brand xi) Runway Brand


Rs.3,513.11 Sq.m

Rs.3,015.07

Page-27

CH - 6: PLASTERING AND HERITAGE FINISHES Item No. 6 PLASTERING

6.1

D e s c ri pt i on

U nit

Rat e

LIME PLASTERING

1 lime: 1 surkhi:1 sand) in single coat on fair side of 6.1.1 15 mm th ick li me pl as ter 1:1:(1 brick/concrete walls for interior plastering up to second floor level including arises, internal round angles, chamfers and / or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

Sqm

Rs.160.86

1 lime: 1 surkhi:1 sand) in single on half brick walls 6.1.2 15 mm th ic k li me pl as ter 1:1:(1 for interior plastering up to second floor level including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

Sqm

Rs.165.63

6.1.3 Extra over item no. 6. 1. 1 an d 6. 1. 2for each subsequent floor or part thereof beyound 2nd floor level.

Sqm

Rs.15.31

Sqm

Rs.128.16

c) In cement mortar 1:5

Sqm Sqm

Rs.116.85 Rs.107.87

d) In cement mortar 1:6

Sqm

Rs.101.88

A) On rough side a) In cement mortar 1:3

Sqm

Rs.167.05

b) In cement mortar 1:4

Sqm

Rs.147.23


Sqm

Rs.136.63


Sqm

Rs.127.87


Sqm Sqm

Rs.165.52 Rs.145.70


Sqm

Rs.135.09


Sqm

Rs.126.34

a) In cement mortar 1:3

Sqm

Rs.210.14


Sqm

Rs.183.86


Sqm

Rs.169.57


Sqm

Rs.157.59

6.2

CEMENT PLASTERING

6.2.1 10 mm th ick Ce ment pl as ter in si ng le coat on fair siofdebrick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3 b) In cement mortar 1:4

on or half brick wall for interior 6.2.2 15 mm th ick Ce ment pl as ter in si ng le coat single plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

B) On fair side a) In cement mortar 1:3

r two coats on single or half brick walls for interior 6.2.3 20 mm th ick Ce ment pl as tein plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick)

B) On fair side ( backing coat 10 mm and finishing coat 10mm thick)

Ch-6 : Plastering Haritage Works

Page-28

Item No.

D e s c ri pt i on

U nit

Rat e


Sqm

Rs.243.74


Sqm

Rs.217.46


Sqm

Rs.203.17


Sqm

Rs.191.19


Sqm

Rs.6.93


Sqm

Rs.5.15


Sqm

Rs.4.21


Sqm

Rs.3.42


Sqm

Rs.10.39


Sqm

Rs.7.75


Sqm

Rs.6.31


Sqm

Rs.5.11


Sqm

Rs.13.89


Sqm

Rs.10.35


Sqm

Rs.8.45


Sqm

Rs.6.80

Sqm

Rs.21.78

a) On Single coat plaster

Sqm

Rs.3.87

b) On two coat plaster

Sqm

Rs.4.64


Sqm

Rs.3.83


Sqm

Rs.4.98


Sqm

Rs.3.53


Sqm

Rs.4.41

a) Flush band

Sqm

Rs.251.73

b) Sunk band

Sqm

Rs.267.09

6.2.4 Extra over item no 6. 2. 1 to 6. 2. 3for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed. i) 10 mm thick plaster

ii) 15 mm thick plaster

ii) 20 mm thick plaster

6.2.5 Extra over item no 6.2.1 to 6.2.3 for plastering on celli ng and sof fitsof stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. forl 6.2.6 Extra over item no 6.2.1to 6.2.3 for in teri or pl as teri ng above 1s t fl oor leve every addl floor or part thereof including curing complete as directed.

6.2.7 Extra over item no 6.2.1 to 6.2.3 for exte ri or pl as te ri ng over wall up to a heig ht of 1st floorlevel above ground level including curing complete as directed.

6.2.8 Extra over item no 6.2.1 to 6.2.3 for exte ri or pl as teri ng over wa ll for every addl flooror part thereof beyond 1st floor level including curing complete as directed.

6.2.9 15 mm th ick pl ai n cement mort ar bandins cement mortar 1:4 in width including curing complete as directed. A) Up to 300 mm width


Page-29

Item No.

D e s c ri pt i on

c) Raised band

U nit

Rat e

Sqm

Rs.292.64

a) Flush band

Sqm

Rs.190.37

b) Sunk band

Sqm

Rs.205.71

c) Raised band

Sqm

Rs.231.28

a) Flush pointing

Sqm

Rs.74.85

b) Ruled pointing

Sqm

Rs.77.41

c) Cut or weather struck pointing

Sqm

Rs.77.41

c) Raised and Cut pointing

Sqm

Rs.119.34

a) Flush pointing

Sqm

Rs.71.49

b) Ruled pointing

Sqm

Rs.73.98

c) Cut or weather struck pointing

Sqm

Rs.73.98

d) Raised and Cut pointing

Sqm

Rs.115.92

a) Flush pointing

Sqm

Rs.55.19

b) Ruled pointing

Sqm

Rs.58.26

a) Flush pointing

Sqm

Rs.52.33

b) Ruled pointing

Sqm

Rs.55.39

a) Flush pointing

Sqm

Rs.49.93

b) Ruled pointing

Sqm

Rs.53.00

a) Flush pointing

Sqm

Rs.48.64

b) Ruled pointing

Sqm

Rs.51.71

a) Flush pointing

Sqm

Rs.73.54

b) Ruled pointing

Sqm

Rs.76.09

a) Flush pointing

Sqm

Rs.68.84

b) Ruled pointing

Sqm

Rs.71.39

B) Above 300 mm width

6.3

Pointing

6.3.1 P oi n t i n g on b ri c k w or kwith cement mortar including curing complete as directed.(Measurement shall be taken on surface area of the wall). A) Cement mortar prop. 1:3

B) Cement mortar prop. 1:4

6.3.2 Po in ti n g on bri ck f loor i ngwith cement mortar including curing complete as directed.(Measurement shall be taken on surface area of the floor). A) On flat brick flooring i) Cement mortar prop. 1:2

ii) Cement mortar prop. 1:3

iii) Cement mortar prop. 1:4

iv) Cement mortar prop. 1:5

B) On edge brick flooring i) Cement mortar prop. 1:2



Page-30

Item No.

D e s c ri pt i on

U nit

Rat e

iii) Cement mortar prop. 1:4

a) Flush pointing

Sqm

Rs.65.24

b) Ruled pointing

Sqm

Rs.67.80

a) Flush pointing

Sqm

Rs.63.30

b) Ruled pointing

Sqm

Rs.65.86

a) Flush pointing

Sqm

Rs.80.21

b) Ruled pointing

Sqm

Rs.83.28


Sqm

Rs.134.42

a) Flush pointing

Sqm

Rs.77.44

b) Ruled pointing

Sqm

Rs.80.51


Sqm

Rs.131.65

a) Flush pointing

Sqm

Rs.75.61

b) Ruled pointing

Sqm

Rs.78.16


Sqm

Rs.124.19

a) Flush pointing

Sqm

Rs.72.84

b) Ruled pointing

Sqm

Rs.75.40

Sqm

Rs.121.43

Sqm

Rs.211.99

(a) Granules (Code : HGR)

Sqm

Rs.484.30

(b) Granules with Top Coat (Code : HGRT)

Sqm

Rs.546.93

c) Fine Granules (Code : FG)

Sqm

Rs.337.98

(d) Fine Granules with top coat (Code : FGHT)

Sqm

Rs.483.16

(e) Flakes (Code : HFR)

Sqm

Rs.568.72

(f) Flakes with Top coat (Code : HFRT)

Sqm

Rs.651.31

(g) Fine Flakes (Code : FFH) (h) Fine Flakes with Top coat (Code : FFHT)

Sqm Sqm

Rs.496.67 Rs.650.66

iv) Cement mortar prop. 1:5

6.3.3 Po i n t i n g on st o n e m aso n r ywith cement mortar including including curing complete as directed.(Measurement shall be taken on surface area of the wall) A) On random rubble uncoursed stone masonry i) Cement mortar prop. 1:3


B) On squre, rubble coursed or uncoursed stone masonry i) Cement mortar prop. 1:3


c) Raised and Cut pointing 6.3.4 R ai se d an d cu t poin ti n g on A sh l er ma son ry or con crete bl ock wallini ng white

6.4

cement 1:3 (1 white cement 3 marble curing complete as directed.mortar (Measurementshall be taken: on surfacedust) area including of the wall) HERITAGE FINISHING

6.4.1 Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of HeritageSurface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department.


Page-31

Item No.

D e s c ri pt i on

U nit

Rat e

(i) Granite Finish (Code : HFG)

Sqm

Rs.813.54

(j) Sand Dune

Sqm

Rs.273.69

(k) Silica Duke

Sqm

Rs.111.84

(l) Lineal Finish

Sqm

Rs.322.73

(m) Roto Finish

Sqm

Rs.302.91

(n) Roller Coat (Application by Special Roller)

Sqm

Rs.231.37

(o) Roller Coat (Application by brush)

Sqm

Rs.106.03

(p) Spray Coat (Bubble Finish)

Sqm

Rs.382.85

(q) Spray Coat (Compact Finish)

Sqm

Rs.698.69


Page-32

Ch 7: CEILLING, LINING AND PARTITION Item No. 7.1

D e s c r i pt i onofw o r k s

U ni t

Rate

WATTLE/ SPILT BAMBOO CEILING

7.1.1 Providing wattle /spilt bamboo ceilling mud plastered on top and 15mm cement plaster in proportion 1:4 in two coats -10 mm first coat and 5mm second coat on bottom, white wash three coats on cement plastered surface complete (timber ceilling joists to be measured and paid separately).

Sqm

183.83

7.1.2 Providing wattle/ spilt bamboo ceilling 15mm cement plastered in proportion 1:10 on top and hessian cloth at bottom fitted with 38mmx12mm 1st class hollock / bonsum / sundi timber beading chamfered and finished with 2 coats of enamel painting to the timber beads complete (timber ceilling joists to be measured and paid separately).

Sqm

211.87

7.1.3 Providing wattle/spilt bamboo ceilling 15mm cement plastered at top in proportion 1:10 and markin cloth at bottom fitted with 38mm x12mm 1st class hollock/ bonsum/ sundi timber beading chamfered and finished with 2 coats of chalk washing to the markin cloth and 2 coats of enamel painting to timber beads complete (timber ceilling joists to be measured and paid separately).

Sqm

215.83

7.1.4 Providing wattle/ spilt bamboo crete ceilling with 25 mm thick mud plaster on top and bottom in two coats - 15mm and 10mm, the final coat being trowel finished and white wash 3 coats below.( ceilling joists to be measured and paid separately).

Sqm

166.5

7.1.5 Providing single layer bamboo-mat ceilling with lattice-pattern jaffri or mesh size 40mmx 40mm made out of bamboo slips of size 5mmx2mm size at bottom stiffened with bamboo slip of 25 mm x 5 mm size. (ceilling joist to be measured and paid separately).

Sqm

161.08

7.1.6 Repairing and refixing tarja mat ceiling.

Sqm

38.77

7.1.7 Taking out and refixing dharamat ceiling after repairing as necessary including changing damage kamies, dhara, jaffri works, bethua bamboo ceiling joints, as and where necessary, including cleaning the top and bottom faces of the ceiling as directed complete,including tying with galvd wire for fixing in proper position.

Sqm

39.34

7.2

GYPBOARD CEILING

7.2.1 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion

Ch-7: Ceilling,Lining Partitions Works

Page-33

Item No.


U ni t

Rate

Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).

(i)

9.5mm thick

Sqm

1214.8

(ii)

12.5mm thick

Sqm

1105.5

7.2.2 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular Then 12.5mm thick square edge Fulltone/ Sundance/ Cratone/ Louvertone/ Textured. Gypboard panels of size 595mmx595mm (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 290mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately). (A)

M/F Frame Work with Design Type Textured Gypboard Tiles 9.5mm thick.

Sqm

1453

(B)

M/F Frame Work with Design Type Semi Perforated Gypboard (Sundance) Tiles (NRC value 0.20 with 50mm glass wool mat backing) 12.5mm thick.

Sqm

1462.8

(C)

M/F Frame Work with Acoustic Type Fissured Gypboard (Cratone) Tiles (NRC value 0.57 with 50mm glass wool mat backing) 12.5mm thick.

Sqm

1679.4

(D)

M/F Frame Work with Acoustic Type Fully Perforated Gypboard (Fulltone) Tiles (NRC value 0.75 with 50mm glass wool mat backing) 12.5mm thick.

Sqm

1661

(E)

M/F Frame Work with Acoustic Type Slit Gypboard (Louvertone) Tiles (NRC value 0.72 with 50mm glass wool mat backing) 12.5mm thick.

Sqm

1684.5


Page-34

Item No.


7.2.3 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) pre-coated G.I. angle size 24mmx24mmx80mm thick fixed to the brick wall/ partition at the perimeter of ceiling with nylon sleeves and screws, at 610mm c/c. Then suspending main 'T' section (bottom pre-coated) size 24mmx38mmx0.70mm and 3600mm long from the soffit in one direction with the help of metal Rawl Plug. Soffit cleat and G.I. Rod 4mm diameter with galvanised level clip 1220mm c/c G.I. cross

U ni t

Rate

Sqm

(A)

BPB Grid ceiling system with plain Gypboard Tiles 12.5mm thick.

Sqm

1294.7

(B)

BPB Grid ceiling system with plain Gypboard Tiles 9.5mm thick.

Sqm

1286.8

(C)

BPB Grid ceiling system with plain Gypboard Tiles 8.0 mm thick.

Sqm

1270.6

(D)

BPB Grid ceiling system with P.V.C. laminated plain Gypboard (Polyshield-P) Tiles 9.5mm thick.

Sqm

1599.2

(E)

BPB Grid ceiling system with P.V.C. laminated crack Gypboard (Polyshield-C) Tiles 9.5mm thick.

Sqm

1608.5

(F)

BPB Grid ceiling system with Design Type Textured Gypboard Tiles 9.5mm thick.

Sqm

1389.9

(G)

BPB Grid ceiling system with Design Wall Paper Gypboard (Paprex Panel) Tiles

Sqm

(i)

8 mm thick

Sqm

1487.6

9.5mm thick BPB Grid ceiling system with Fabric Based Sound absorb Panel (595mmx595mm).

Sqm

1453.6

Sqm

2115.1

BPB Grid ceiling system with Design Type Semi Perforated Gypboard (Sundance) Tiles 7.2.4 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) wall lining which includes 12.5mm/ 9.5mm thick Gypboard (conforming to IS:2095-1982) screw fixed to the Ceiling section of size 0.55mm thick having a knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm made of G.I. Steel placed at 600mm c/c in perimeter channels of size 0.55mm thick having one flange of 20mm and flane of 30mm and a web of 27mm made of G.I. Steel fixed to the floor & ceiling with nylon sleeves & wood screws at 600mm c/c.

Sqm

1399.7

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) wall lining which includes 12.5mm/ 9.5mm thick Finally the boards are to be jointed and finished so as to have a Flush look which includes filling and finishing with jointing Compound, joint paper tape, two coat drywall top coat suitable for Gypboard complete as specified and directed at all levels (Glass wool to be measured and paid separately) (For light finishing, skirting providing opening for doors, windows, ventilators etc. cut out made with the frame of perimeter channel supported suitably to be measured and paid suitably when necessary).

Sqm

(A)

M/F wall lining with plain Gypboard 9.5mm thick.

Sqm

1224.5

(B)

M/F wall lining with plain Gypboard 12.5mm thick.

Sqm

1218.2

(ii) (H) (I)

7.2.5 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) wall lining which includes 12.5mm thick Louvertone/ Sundance/ Cratone/ Fulltone (slit) Gypboard ceiling panels of size 595mmx595mm (conforming to IS:2095-1982) screw fixed to the Ceiling section of size 0.55mm thick having a knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm made of G.I. Steel placed at 298mm c/c in perimeter channels of size 0.55mm thick having one flange of 20mm and flane of 30mm and a web of 27mm made of G.I. Steel fixed to the floor & ceiling with nylon sleeves & wood screws at 600mm c/c.


Sqm

Page-35

Item No.


U ni t

Rate

Finally the boards are to be jointed and finished so as to have a Flush look which includes filling and finishing with jointing Compound, joint paper tape, two coat drywall top coat suitable for Gypboard complete as specified and directed at all levels (Glass wool to be measured and paid separately) (For light finishing, skirting providing opening for doors, windows, ventilators etc. cut out made with the frame of perimeter channel supported suitably to be measured and paid suitably when necessary). (A)

M/F wall lining with Design Type Semi Perforated (Sundance) Gypboard 12.5mm thick (NRC value=0.20 with 50mm glass wool mat backing).

Sqm

1332.8

(B)

M/F wall lining with Acoustic Type Fissured (Cratone) Gypboard 12.5mm thick (NRC value=0.57 with 50mm glass wool mat backing).

Sqm

1569

(C)

M/F wall lining with Acoustic Type Fully Perforated (Fulltone) Gypboard 12.5mm thick (NRC value=0.75 with 50mm glass wool mat backing).

Sqm

1549

(D)

M/F wall lining with Acoustic Type Slit (Louvertone) Gypboard 12.5mm thick (NRC value=0.72 with 50mm glass wool mat backing).

Sqm

1574.6

7.2.6 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) 97mm thick metal stud partition (Single layer) including one layer of tapered edge 12.5mm thick Gypboard (conforming to IS:2095-1982) screw fixed to drywall screw of 25mm at 300mm c/c to either side of 75mm studs (0.55mm thick having one flange of 34mm and another flange of 36mm made of G.I. steel) with joints staggered to avoid leakage through joints and jointing the square and tapered edges of the boards and finishing so as to have a flush look which includes filling and finishing with jointing Compound, joint paper tape, two coat drywall top coat suitable for Gypboard complete as specified and directed at all levels (Glass wool to be measured and paid separately) (For light finishing, skirting providing opening for doors, windows, ventilators etc. cut out made with the frame of perimeter channel supported suitably to be measured and paid suitably when necessary). (A)

Partition with Plain Gypboard

Sqm

2006.6

(B)

Partition with Acoustic Type Fissured (Cratone) Gypboard (NRC value=0.57 with 50mm glass wool mat backing)

Sqm

2442

(C)

Partition with Acoustic Type Fully Perforated (Fulltone) Gypboard (NRC value=0.75 with 50mm glass wool mat backing)

Sqm

2876.7

(D)

Partition with Acoustic Type Slit (Lovertone) Gypboard (NRC value=0.72 with 50mm glass wool mat backing)

Sqm

3170.7

7.2.7 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm Gypboard. False ceiling (Light Duty) with Metal Polyster Laminated Board on Back (MPL) (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws

Sqm


Page-36

Item No.


is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and

U ni t

Rate

Sqm

(i)

where necessary). 9.5mm MPL

Sqm

1487.6

(ii)

12.5mm MPL

Sqm

1502.7

7.2.8 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

Sqm

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:20951982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary). (i)

9.5mm MRB

(ii) 12.5mm MRB 7.2.9 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) 50mm floor & ceiling channels (with flanges of 32mm each and 0.55mm thick) with the help of nylon sleeves and steel screws to the floor and R.C.C. respectively. 48mm studs (with flanges of 36mm and 34mm and 0.55mm thick) are then placed at every 595mm c/c in between floor and ceiling channels. The studs are then anchored to the wall at every 600mm c/c with help of L cleats fixed to studs with nut and bolts and to the wall with metal rawl plugs. Then 15mm thick Gypboard Silt Tone Sound Smart panels having 3mm thick non woven carpet (plain) are then fixed to the studs with a suitable beading. 50mm thick glass wool shall be placed at the back side of the panels to get the required absorption. (For skirting light fittings, grills diffusers etc. cut out to be made with the frame of perimeter channels supported suitably and measured and paid separately as and when necessary). (Glass wool to be measured and paid separately).

Sq.m.

1427

Sqm

1457.6

Sqm

2762.3

Sqm

507.7

7.2.10 Extra for providing Twiga Insul glass wool mat backing with chicken mesh cover of Twiga Fibre Glass insulation as specified and directed at all levels. (i)

25mm thick


Page-37

Item No.


U ni t

Rate

(ii) 50mm thick 7.2.11 Extra for providing cut outs for light/ A.C. diffusers, drops, access panel etc. in Gypboard ceiling portion, partition wall, lining etc. complete at all levels as specified and directed.(net area of cut out portion to be measured and paid only).

Sq.m.

702.2

Sq.m.

605

7.2.12 Extra for providing two coats of water resistant sealant to upper surface of the board to prevent it from damage due to water leakage complete at all levels as

Sqm

44

Sqm

1016.4

(a). Teak wood plank (20mm thick)

Sqm

1457.72

(b).Hollock (25mm thick)

Sqm

1157.48

(c) Bonsum / Sundi wood plank (25mm thick)

Sqm

1130.19

(d).Gamari timber plank (25mm thick)

Sqm

1157.48

(a).Hollock (25mm thick)

Sqm

1330.44

(b) Bonsum/ Sundi timber plank (25mm thick)

Sqm

1320.13

(c).Gamari timber plank (25mm thick)

Sqm

1320.13

(d).2nd class timber plank (25mm thick)

Sqm

1073.92

(a). Teak ( 40mmx12mm).

Rm

59.08

(b) Hollock timber plank (40mmx12mm)

Rm

46.49

(c) Extra for making chamfered edges of cover fillets.

Rm

12.37

Sqm

357.22

I).12 mm thick.

Sqm

1296.76

ii).20 mm thick.

Sqm

1867.51

iii).25 mm thick.

Sqm

2240.63

specified and directed. 7.2.13 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) moulded timber skirting with best quality 1st class local wood timber planks of 75mm height and 20mm thick at bottom of Gypboard partition and wall lining etc. complete as specified and directed at all levels. 7.3

WOO DEN WOR K I N C EILI NG AND WAL LS

7.3.1 Providing and fixing wood plank ceiling with tongued and grooved joint leaving a gap of 10 mm as per drawing including necessary nails & wood screws complete(Timber frame work to be measured and paid separately).

7.3.2 Providing and fixing wood plank ceiling with butt and lap joints including necessary nails and wood screws complete (Timber frame work to be measured and paid separately).

7.3.3 Providing and fixing plain, squre edged cover fillet in ceiling and lining with wood screws including mitreing at junctions.

7.3.4 Providing, fitting and fixing frame work for wall panelling with Hollock/ Bonsum/ Sundi battens of size 50mmx25mm fixed over tapering plugs made out of trapezoidal section having base 50mmx50mm at the bottom and 38mmx38mm at the top with depth of 50mm embeded in cement sand mortar in prop1:3 and spaced 450mm to 500mm apart complete with counter sunk wood screw of 50mm length. 7.3.5 Providing and fixing Teak wood lining with tongue and groove joint leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work complete (frame work to be measured and paid separately).

7.3.6 Providing and fixing 1st class local wood Hollock / Bonsum / Sundi / Gamari lining with tongue and groove joints leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work complete (frame work will be measured and paid separately). i).12 mm thick. Ch-7: Ceilling,Lining Partitions Works

Page-38

Item No.


a) Hollock b) Gamari ii).20 mm thick. a) Hollock b) Gamari iii).25 mm thick. a) Hollock b) Gamari 7.3.7 Providing and fixing 1st class local wood Hollock /Bonsum/ Gamari/ Sundi lining with butt joints including fitting and fixing with countersunk screws with the frame with complete (frame work to be measured and paid separately).

U ni t

Rate

Sqm Sqm

1050.15 1050.15

Sqm Sqm

1420.63 1420.35

Sqm Sqm

1653.55 1653.55

a) Hollock

Sqm

800.62

b) Bonsum / Sundi

Sqm

798.29

c) Gamari

Sqm

798.29

a) Hollock

Sqm

1121.27

b) Bonsum / Sundi

Sqm

1121.27

b) Gamari

Sqm

1121.27

a) Hollock

Sqm

1324.16

b) Bonsum / Sundi

Sqm

1318.33

b) Gamari

Sqm

1318.33

i).12 mm thick.

ii).20 mm thick.

iii).25 mm thick.

7.3.8 Providing and fixing timber skirting with butt joining and screws (frame work and cover fillets to be measured and paid separately). a)Teak wood / Sisu wood. i).12 mm thick

Sqm

908.85

ii).20 mm thick

Sqm

1438.21

iii).25 mm thick

Sqm

1776.35

i).12 mm thick

Sqm

702.45

ii).20 mm thick

Sqm

1023.1

iii).25 mm thick

Sqm

1220.15

i).12 mm thick

Sqm

702.45

ii).20 mm thick

Sqm

1023.1

iii).25 mm thick Hollock

Sqm

1225.98

b)Gamari timber plank

c) Hollock/Bonsum/Sundi

7.4

CEILING TILES


Page-39

Item No.


7.4.1 Supplying, fitting and fixing ceiling tiles of 10mm thick made from Duratuff medium density fibre board in size 1200mm x 1200mm x 10mm with Sal wood timber frame (to be measured and paid separately)leaving an expansion gap of 3mm with necessary nails, screws etc. including 1st class local wood (Hollock /Bonsum / Sundi etc.)beading of size 50mm x 12mm complete as directed and specified. 7.5

U ni t

Sqm

Rate

321.08

BISON PANEL CELING AND PARTION

7.5.1 Providing, fitting and fixing in position false ceiling of 6mm thick Bison panel (cement bonded particle board) on timber frame of 1st class local wood (Hollock/ Bonsum/ Sundi) of 50mm x 50mm spaced at not more than 1.20m apart , fixed to the wall at the end with necessary nails, wood screws, hooks,bolts etc. including painting (one coat primer and two coats of painting) as necessary complete as directed by the Department for all levels.

(a) Both sides commercial

Sqm

786.2

(b) One side laminated

Sqm

995.66

(A) Both sides commercial I) 10mm thick Bison Panel

Sqm

1012.05

ii) 12mm thick Bison Panel

Sqm

1178.58

iii) 16mm thick Bison Panel

Sqm

1292.52

iv) 20mm thick Bison Panel

Sqm

1362.42

I) .10mm thick Bison panel

Sqm

1297.47

ii) .12mm thick Bison panel

Sqm

1328.25

iii) .16mm thick Bison panel

Sqm

1397.88

i)10mm thick Bison Panel

Sqm

1271.28

ii)12mm thick Bison Panel

Sqm

1299.35

Sqm

1383.83

(a) Both sides commercial

Sqm

1360.44

(b) One side laminated

Sqm

1372.01

7.5.2 Providing, fitting and fixing in position Bison panel (cement bonded particle board) partition wall on one face of the timber frame of 1st class local wood (Hollock/ Bonsum/ Sundi)of 50mm x 80mm spaced at not more than 1.20m apart , fixed with necessary nails, wood screws, bolts etc. including painting (one coat primer and two coats painting) as necessary complete as directed by the Department for floors.

(B) One side laminated and one side commercial

(C) Both side laminated

iii)16mm thick Bison Panel 7.5.3 Providing, fitting and fixing in position 6mm thick Bison panel (cement bonded particle board) partition wall on both faces of the timber frame of 1st class local wood (Hollock/ Bonsum/ Sundi) with horizontal and vertical batten of size 50mm x 80mm spaced at not more than 1.20m apart , with necessary nails, wood screws, bolts etc. including painting (one coat primer and two coats painting) as necessary complete as directed by the Department for all levels.

7.6

PLYWOOD / HARDBOARD PARTION

7.6.1 Providing, fitting and fixing in position plywood / hardboard partion walls with 6mm thick plyboard / hardboard (best) with horizontal and vertical Sal battens of size 50mm x 80mm spaced at not more than 1.20m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels (Painting / Varnishing to be measured and paid separately).


Page-40

Item No.


U ni t

Rate

A) 6mm thick Plyboard a) On one face of the frame

Sqm

951.13

b) On both faces of the frame

Sqm

1455.22

a) On one face of the frame

Sqm

596.91

b) On both faces of the frame

Sqm

767.02

Sqm

1623.3

7.8.1 Providing, fitting and fixing in position 62mm thick double skin partion with well seasoned Bonsum/ Sundi / Hollock frame in size 75mm x 38mm and internal frame of 50mm x 38mm and fixing on both sides 9mm thick flat pressed melamine faced pre-laminated graded wood patrticle boards bonded with phenol formaldehyde synthetic resin of approved shade as specified and directed at all levels. One side decorative (Bhutan board/Nepal Board/Bajaj board or equivalent board as directed by departement)

Sqm

3812.63

7.8.2 Providing, fitting and fixing in position 62mm thick double skin partion with well seasoned Sal/ Bonsum/ Sundi / Hollock frame in size 75mm x 38mm and internal frame of 50mm x 38mm and fixing on both sides 8mm thick flat pressed melamine faced pre-laminated baggage board medium density fibre boards (MDF) bonded with phenol formaldehyde synthetic resin of approved shade as specified and directed at all levels. a) With Bajaj - exterior grade(one side decorative) (i) 8 mm tgick 7.8.3 Providing, fitting and fixing in position 38/30mm thick single skin partion with well seasoned Bonsun/ Sundi / Hollock frame in size 75mm x 38mm / 75mm x 50mm and fixing 12mm / 18mm thick flat pressed melamine faced pre-laminated graded wood patrticle boards bonded with phenol formaldehyde synthetic resin of approved shade as specified and directed at all levels.

Sqm

4440.87

(a) 12mm thick

Sqm

1386.84

(b) 19mm thick

Sqm

1695.41

(a) 12mm thick

Sqm

1519.28

(b) 19mm thick

Sqm

1792.48

(a). 3 mm thick (b). 4.5 mm thick

Sqm Sqm

184.95 231.26

(c). 6 mm thick

Sqm

262.13

B) 6mm thick Hardboard

7.7 DUROSAM CEILING TILES 7.7.1 Providing, fitting and fixing in position ceiling tiles of Natural Fibre Thermosets Composite of jute, polymer and chemicals of Durosam brand or equivalent as directed by department in size 610mm x 610mm x 4mm thick with necessary nails, screws etc. complete as specified and directed at all levels (Framework to be measured and paid seperately.) 7.8

Pre lam inated Par ticle Board

(I) Exterior grade - One side decorative

(II) Exterior grade - Both side decorative

7. 9 OT HE R TY PE S O F C EIL ING 7.9.1 Providing, fitting and fixing hard board sheet ceilling with approved quality with necessary nails, wood screws including 1st class local wood 50mm x 12mm ( hollock/ bonsum/ sundi ) beading including paining two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately ).


Page-41

Item No.


U ni t

Rate

7.9.2 Providing, fitting and fixing in position ceiling tiles of unveneered teakwood particle board bonded with phenol formaldehyde synthetic resin equivalent to anchor nova teak super in size 600 mm x 600mmx12mm leaving an expansion gap of 10m m as per the drawing with necessary links and wood screws complete (timber frame work to be measured and paid separately). (a). Plain

Sqm

615.72

(b). Half perforated/ Full perforated

Sqm

622.09

Sqm

628.46

Sqm

799.7

(b). Curved surface

Sqm

936.96

(c).Extra for sunk or raised mouldings in plaster of paris (Gypsum, anhydrous) ceiling

Sqm

336.05

(a). 15mm thick

Sqm

319.64

(b). 20mm thick

Sqm

340.66

(c). 25mm thick

Sqm

368.68

i).12 mm thick.

Sqm

1465.22

ii).20 mm thick.

Sqm

1694.5

iii).25 mm thick.

Sqm

2016.76

i).12 mm thick.

Sqm

1188.27

ii).20 mm thick.

Sqm

1493.97

iii).25 mm thick.

Sqm

1672.3

i).12 mm thick.

Sqm

1061.97

ii).20 mm thick.

Sqm

1367.67

iii).25 mm thick.

Sqm

1546

7.9.3 Providing, fitting and fixing in position ceiling tiles of Insulex board(soft) in size 600mm x 600mm x 12mm leaving an expansion gap of 10mm as per the drawing with necessary nails and wood screws complete (timber frame work to be measured and paid separately). 7.9.4 Providing 10mm thick plaster of paris (Gypsum, Anhydrous) ceiling up to a height of 5m above floor level over 1st class Hollock / Bonsum / Sundi wood strips 25mm x 6mm with 10mm gap in between with rabit wire mesh fixed to wooden frame (frame work to be measured and paid separately). (a). Flat surface

7.9.5 Providing and fixing expanded polystyrene plain tiles (thermocol) ceiling with fevicol @ 5 lits.per 10 m2 and brass screws etc.complete ( frame work and cover fillets to be measured and paid separately).

7.9.6 Providing and fixing decorative type veneered particle board lining with butt joint leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work (frame work and cover fillets to be measured and paid separately). (A) Decorative

(B) One Side Decorative

7.9.7 Providing and fixing one side teak veneered particle board lining with butt joint leaving a gap of 10mm as per drawing including fitting and fixing with countersunk screws with the frame work complete as specified and directed at all levels(frame work to be measured and paid separately).

7.10 Ceiling with Exposed Metal (G.I.) Frame work with E -Grid - 2430


Page-42

Item No.


U ni t

Rate

(exposed 7.10.1 Providing and fixing, in position su sp en ded fals e ceil in g us in g E- Grid ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. (A) Standard Ceilings of Everest make or equivalent as directed by the departement

(i) Using 4 mm thick FC Board

Sqm

786.38

(ii) Using 6 mm thick FC Board

Sqm

907.12

(B) Designer Ceilings of Everest make or equivalent as directed by the departement

(i) Using 4 mm thick FC Board

Sqm

906.69

(ii) Using 6 mm thick FC Board

Sqm

1079.86

A) Everest Designer Ceilings or equivalent as directed by the departement (Primered) A) Using 13mm thick ceiling tiles

Sqm

1235.05

B) Using 15mm thick ceiling tiles

Sqm

1753.07

7.11 ACOUSTICAL APPLICATION ins 600mm x 600mm of 7.11.1 Providing and fixing Mi nera l Fi ber Acoust ic Ce il in g Ti le 13mm/15mm thickness to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed.

7.12 FIBRE CEMENT BOARD WALL PANELLING


Page-43

Item No.


U ni t

Rate

7.12.1 Providing and fixing in position concealed G.I. sections for paneling using High Pressure Steam Cured), pre-primered, self-embossed, designer cement board or the non-primered, plain Fibre cement boards of 6mm thickness confirming IS 148622000 fixed on the supporting "W' profile (0.55mm thick) having a knurled web of 51.5mm and two flanges of 26mm each with lips of 10.55mm ) placed @600mm c/c vertically and 11200mm c/c horizontally in perimetre channel (having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm).Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 300mm c/c with expandable fasteners. Board is fixed to the "W" profile with 25mm long self embedding type Fibre cement Screws @ 300mm c/c, all complete as per the drawing & directions of Engineer-in -charge. The boards may be finished so as to have a uniform gap/groove or Flush finish.The flush finish should be done with Elasto prefab joint sealant. Internal Jointing Compound and paper tape as per the procedure laid down by company. Note: Alternatively, the uniform gap/groove may be covered with decorative molding or may be finished with Jointing filler including 2 coats of acrylic emulsion paint of approved shade/make, over a coat of cement primer before installing it on the grid as required. I) Everest Plain FC board or equivalent

Sqm

1088.53

II) Everest Designer FC board or equivalent

Sqm

1241.71

III) Everest HDFC Board or equivalent

Sqm

1182.85

i) Using 8mm thick FC Wall board of Everest make or equivalent

Sqm

1731.53

ii) Using 10 mm thick FC Wall board of Everest make or equivalent

Sqm

1943.08

iii) Using 12 mm thick FC Wall board of Everest make or equivalent

Sqm

2154.31

i) Using 9mm thick FC Wall board of Everest make or equivalent

Sqm

2123.99

ii) Using 12 mm thick FC Wall board of Everest make or equivalent

Sqm

2537.1

7.12.2 Providing and fixing doubl e ski nned partit ionsusing G.I. sections High Pressure Steam Cured non asbestos Fibre Cement wall board conforming to IS 14862-2000 , fixed on frame work using 25mm fully threaded self embedding type Fibre Cement Screws @300mm c/c on either side of Steel G.I. 51mm studs (0.55mm thick having one flange of 40mm and another flange of 42mm ) placed at 600mm c/c in 51mm floor and ceiling channel (0.55mm thick having equal flange of 32mm G.I. steel) with joints staggered to avoid through joints, all complete as per the drawing & direction of Engineer-in -Charge. The boards may be finished so as to have a uniform gap/groove or Flush finish.The flush finish should be done with Elasto prefab joint sealant. Everest Internal Jointing Compound and paper tape as per the procedure laid down by the company. Alternatively, the uniform gap/groove may be covered with decorative molding or may be finished with Jointing filler. Finally, if specified the boards to be painted with 2 coats of acrylic emulsion paint of approved shade/make, over a coat of cement primer before installing it on the grid. A. For Dry Area

B. For Wet Area


Page-44

Item No.


U ni t

Rate

7.12.3 Providing and fixing 50mm/ 75mm thick Non asbestos Everest Soli d Wa ll Pa nels (Fibre reinforced aerated cement core sandwich panels) made out of light weight fibre reinforced aerated cement/concrete core composed of port land cement, flyash, binders etc., and 4mm thick Non asbestos fibre cement Boards (Everest Wall Boards) as per IS 14862:2000 on either side of the core, having a tongue and groove on longitudinal side of the modules. These Everest Solid Wall Panels are erected / installed using galvanised iron steel tracks of 1mm thick & of size 15x50x25mm as bottom track, 38x50x38mm as top track used for fixing to the floor and top of the wall respectively. Finally grooves of the panels should be finished with Everest recommended jointing compound. i) Using 50 mm thick SW panel of Everest make or equivalent

Sqm

2255.57

i) Using 75 mm thick SW panel of Everest make or equivalent

Sqm

2578.06

i) Using 9mm thick board of Everest make or equivalent

Sqm

1475.35

ii) Using 12mm thick board of Everest make or equivalent

Sqm

1681.9

7.12.4 Providing and fixing in position High Pressure Steam Cured Non As best os Fi bre Ce ment Ev er es t He av y Du ty Wall Boar(Density>1500 d Kg/m3) confirming IS 14862 & Type A as Eves Board to be fixed on iron or timberSection as per the drawing & directions of engineer-in-charge. Finally, if specified, the boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer after installing it on to the concealed metal framework.


Page-45

CH-8 : ROOFING & ROOF TREATMENT Item D es c r i p t i o n No 8.1 ROOFING 8.1.1 Providing corrugated galvenised Iron sheet roofing of TATA SHAKTEE / SAIL including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlin etc. (Roof trusses and purlin etc.to be measured and paid separately).

U ni t

R at e

(a) 0.45 mm thick (b) 0.50 mm thick

Sqm Sqm

450.45 484.76

(c) 0.55 mm thick

Sqm

512.95

(d) 0.60 mm thick

Sqm

550.94

(e) 0.63 mm thick

Sqm

576.68

8.1.2 Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed. (a) 0.45 mm thick mm 150 lapping (i) 230 mm lapping (ii)

RM

134.92

RM

152.69

(b) 0.50 mm thick mm 150 lapping (i) 230 mm lapping (ii)

RM

143.63

RM

162.86

(c) 0.55 mm thick mm 150 lapping (i) 230 mm lapping (ii)

RM

150.84

RM

171.27

(d) 0.60 mm thick mm 150 lapping (i) 230 mm lapping (ii)

RM

169.59

RM

193.14

(e) 0.63 mm thick mm 150 lapping (i) 230 mm lapping (ii)

RM

176.08

RM

8.1.3 Labour for fitting and fixing Galvd corrugated iron roofing including supplying and fixing with new galvd screw, J hook, bolts nuts, washer etc. complete as directed.

200.71 Sqm 120.72

8.1.4 Labour for taking out and refitting Galvd ridging including supplying and fixing necessary galvd screw, bolts and nuts complete as directed.

RM

8.1.5 Providing 13 mm mesh hexagonal wire net made of one I.S. designation (1mm dia) wire above post plate in eaves with 1st class Hollock/Bonsum/ Sundi timber frame to fit exactly with the corrugation of roofing sheet including kiricide oiling two coats to timber works complete as directed.

Sqm

8.1.6 Providing 13 mm mesh hexagonal wire net made of one I.S. designation (1mm dia) wire above post plate in eaves with 1st class (Hollock/Bonsum) timber frame to fit exactly with the corrugation of roofing sheet including painting two coats with approved paint to timber works complete as directed.

Sqm

8.1.7 Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed.

Sqm

Ch-8: Roofing and Roof Treatment

66.7

519.36

543.57

427.61

Page-46

Item D es c r i p t i o n No 8.1.8 Supplying, fitting and fixing wind ties with 40mm x6mm M.S. flat iron and necessary 10 mm dia G.I hook bolt, G.I flat washer and bitumen washer etc. complete including two coats painting with red oxide anticorrosive paint.

8.1.9 Labour for taking out and refitting M.S. flat wind ties in position with new 10 mm dia J hook, G.I. flat washer, bitumen washer etc. including painting one coat with red oxide paint complete.

U ni t

R at e

RM 201.58 RM 63.54

8.1.10 Providing bracket made out of M.S. flat, bent to proper size and shape as per drawing and fitting with necessary bolts, nuts, sand washers etc. for fixing A.C / G.I. sheet gutters with purlins.

kg 208.03

8.1.11 Providing thatch roofing with sun grass (Ullo) in layer of 75 mm thick with half spilt bamboo fillet and tying with galvd. wire complete. (a) 75 mm thick.

Sqm

277.14

(b) 150 mm thick.

Sqm

531.14

8.1.12 Providing and laying thatching, capping to ridge and hip with new sun grass of 75 mm thick (fine work) stiffened with bamboo slips of size 30mm x 6mm and tied with galvd. tying wire complete.

RM 186.27

8.1.13 Re-thatching with new sun grass including dismantling and removing old thatching and also defective bamboo and replacing with new one and stacking the old thatch at safe place. (a) 75 mm thick.

Sqm

288.52

(b) 150 mm thick.

Sqm

558.65

8.1.14 Over thatching 75 mm thick with new sun grass, filling in holes and gaps in the roof etc.

Sqm 2819.04

8.1.15 Providing and laying bamboo slip jaffri of meshes not exceeding 63mm x 38mm including tying to the purlins and rafters with cane slip or galvd. tying wire. (a) Fine work

Sqm

51.59

(b) Rough work

Sq.m Sqm

42.07 104.91

RM

34.49

RM

24.97

8.1.16 Providing single layer of bamboo mat lining over roof frame. 8.1.17 Providing bamboo maruli ties, purlins, rafters including tying with cane sling / Galvd. tying wire. (a) With Bhaluka bamboo. (b) With Jati bamboo. 8.1.18 Providing bamboo roof truss with whole ruas bam boo and kamis, ruas placed at 150 mm apart and kamis 200mm to 230mm apart including tying all members with galvd tying wire.

Sqm

8.1.19 Providing bamboo jaffri over thatch roof with 200mm sq mesh bamboo slips of 35mm width

Sqm

8.1.20 Providing whole bamboo roof frame with old and new materials, new materials being at least 25% of the total required.

Sqm

8.1.21 Providing bamboo roof frame with kami of size 30mm x 6mm.


116.29 33.52

34.93 Sqm

42.07

Page-47

Item D es c r i p t i o n No 8.1.22 Renewing / providing 5 layer of bamboo single roofing with matured muli bamboo tarja, woven closely round tiers of single kamis spaced 150mm apart on ground with 600mm and 900 mm single seperately. First 900mm long tiers are tied at lower ends of roof frames projected 450mm, towards the eves, 750mm tiers tied with 150mm overlap of first tiers, 3 nos 600 mm tiers tied with 150mm overlap of second tiers, 2 nos 600mm tiers tied with 150mm overlap of third tiers and forth 600mm tiers continued up to ahead of ridge, the last but one will be 750mm and the last one will be 600mm long (this section gives 5 layers) Then with 900mm wire,

U ni t

R at e

Sqm

diagonally woven double bamboo tarja mat over the ridge complete with all tying with galvd wire as directed and specified. 738.25 8.1.23 Providing corrugated 1.20 mm thick transparent fibre sheet roofing including fitting and fixing necessary galvanised J or L hooks, bolts and nuts of 8 mm dia with bitumen washer 25 mm dia. X 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlins etc. (Roof trusses, purlin, etc. to be measured and paid separately).

Sqm 1319.67

8.1.24 Providing 1.2mm thick transparent fibre sheet ridging including supplying and fixing necessary galvanised screws / washers etc. complete as specified and directed. (a) 1.20 mm thick - 150 mm lapping

m

244.22

(b) 1.20 mm thick - 300 mm lapping

m

280.66

(a)1.00 mm thick

Sqm

1134.15

(b)1.20 mm thick

Sqm

1417.55

(a) 1.20 mm thick - 150 mm lapping

RM

247.19

(b) 1.20 mm thick - 300 mm lapping

RM

283.63

(a) 0.50 mm thick

Sqm

462.17

(b) 0.55 mm thick

Sqm

499.33

(c) 0.60 mm thick

Sqm

537.37

(d) 0.65 mm thick

Sqm

575.41

(i) 150 mm lapping

RM

408.71

(ii) 230 mm lapping

RM

472.56

8.1.25 Providing coloured corrugated transparent fibre sheet roofing including fitting and fixing necessary galvanised J or L hooks, bolts and nuts of 8 mm dia. with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlins etc. (Roof trusses, purlins etc. to be measured and paid separately)

8.1.26 Providing coloured transparent fibre sheet ridging including supplying and fixing necessary galvanised screws / washer etc. complete as specified and directed.

8.1.27 Providing Iron Plastic Laminated corrugated coloured sheet Roofing at all levels including fitting and fixing galvanised J or L hooks, bolts and nuts of 8 mm diameter with Bitumen washer 35 mm x 35 mm x 3 mm and G.I. Diamond washer 40 mm x 40 mm x 3 mm complete excluding cost of roof truss, purlins etc. (Roof trusses, Purlins etc. to be measured and paid separately).

8.1.28 Providing Colour Coated (Iron Plastic Laminated Sheet) Ridging including supplying and fixing necessary galvanised screws / washer etc. complete as specified and directed. (A) 0.50 mm thick


Page-48

Item No

D es c r i p t i o n

U ni t

R at e

(B) 0.55 mm thick (i) 150 mm lapping

RM

446.76

(ii) 230 mm lapping

RM

516.95

(i) 150 mm lapping

RM

486.12

(ii) 230 mm lapping

RM

562.88

(D) 0.65 mm thick (i) 150 mm lapping

RM

524.17

(ii) 230 mm lapping

RM

607.27

(a) 0.40mm thick

Sqm

556.18

(b) 0.50mm thick

Sqm

734.15

(C) 0.60 mm thick

8.1.29 Providing circular corrugated / trouhed Everlast Aluminium roofing sheet of Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchasing from primary producer) including fitting and fixing necessary J or L hooks bolts and nuts 8 mm dia with bitumen / EPDM washer 25mm dia x 3mm thick and 1.6mm limplet washer complete excluding cost of truss, purlin etc. Everlast/ Paragon make or equivalent Quality as directed by the departement

8.1.30 Providing aluminium ridging of Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchasing from primary producer) including fitting and fixing necessary Aluminium screws, washers etc. HINDALCO make or equivalent Quality

Sqm 438.86

8.1.31 Providing plain Polycarbonate transparent sheet Ridging including supplying and fixing necessary self drilling, self tapping screws etc. complete as specified and directed. (i) 150 mm lapping

RM

509.21

(ii) 230 mm lapping

RM

584.30

8.1.32 Providing plain Polycarbonate transparent sheet roofing at all levels with self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) (i) 1.00 mm thick

Sqm

963.78

(ii) 2.00 mm thick

Sqm

1421.60

(iii) 3.00 mm thick

Sqm

2036.58

(i) 0.40 mm thick

Sqm

715.27

(ii) 0.45 mm thick

Sqm

755.32

(iii) 0.50 mm thick

Sqm

836.74

(iv) 0.60 mm thick

Sqm

971.55

(v) 0.80 mm thick

Sqm

1249.19

8.1.33 Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement


Page-49

Item D es c r i p t i o n No 8.1.34 Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement

U ni t

R at e

(i) 0.40 mm thick

RM

428.12

(ii) 0.45 mm thick

RM

463.79

(iii) 0.50 mm thick

RM

517.31

(iv) 0.60 mm thick

RM

588.66

(v) 0.80 mm thick

RM

784.87

(i) 0.40 mm thick

Sqm

573.83

(ii) 0.45 mm thick

Sqm

600.59

(iii) 0.50 mm thick

Sqm

654.1

(iv) 0.60 mm thick

Sqm

725.45

Sqm

921.66

8.1.35 Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) (a)

TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement

(v) 0.80 mm thick 8.1.36 Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (i) 0.40 mm thick

RM

338.9

(ii) 0.45 mm thick

RM

363.82

(iii) 0.50 mm thick

RM

407.14

(iv) 0.60 mm thick

RM

500.51

(v) 0.80 mm thick

RM

611

(i) 0.40 mm thick

Sqm

570.01

(ii) 0.45 mm thick

Sqm

620.97

(iii) 0.50 mm thick

Sqm

678.31

(iv) 0.60 mm thick

Sqm

1058.51

(v) 0.80 mm thick

Sqm

1323.46

RM RM

424.27

8.1.37 Providing Bare Galvalume Sheet Roofing at all levels including fitting and fixing self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement

8.1.38 Providing Bare Galvalume Sheet roofing accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (i) 0.40 mm thick (ii) 0.45 mm thick


459.6

Page-50

Item No

D es c r i p t i o n

U ni t

R at e

(iii) 0.50 mm thick

RM

512.58

(iv) 0.60 mm thick

RM

583.23

(v) 0.80 mm thick

RM

777.52

(i) 0.40 mm thick

Sqm

750.68

(ii) 0.50mm thick

Sqm

855.39

(i) 0.40 mm thick

Sqm

528.98

(ii) 0.50 mm thick

Sqm

556.74

(A) DURASHINE/TATA BLUESCOPE ROOF PROFILE (0.45mm(TCT) x 1072mm)

Sqm

730.23

(B) DURASHINE/TATA BLUESCOPE WALL PROFILE (0.45mm(TCT) x 1150mm)

Sqm

673.44

(C) DURASHINE TILE PROFILE (0.50mm(TCT) x 505mm)

Sqm

1243.86

8.1.39 Providing Pre Painted Steel Tile Sheet at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) Dyna roof /Wonder Roof / Durakolar

8.1.40 Providing Pre Painted Steel Tile Sheet accessories at all levels including fitting and fixing self drilling, self tapping screws complete. Dyna roof/ Wonder Roof/ Durakolor

8.1.41 Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.)

8.1.42 Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium roof , wall and tile profile sheet accessories (total coating thickness=0.45mm) including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) (a)

(i) Plain Ridge

Sqm

408.32

(b)

(ii) Crimped Curved Ridge

Sqm

847.73

(c )

(iii) Crimped End Curved Ridge

Sqm

847.73

(d)

(iv) Gutter / Flashings

Sqm

520.51

Sqm

576.75

(e)

(v) Plain sheet CLAY ROOF TILES 8.1.43 Providing and laying machine made clay roof tiles on sloping roof and chajjas over 20mm thick base of cement mortar 1:3 and jointed with grey cement slurry and joints flush with mortar 1:3 complete.

Sqm 958.53

8.2 ROOF TREATMENT 8.2.1 Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) (b) Cement mortar (i) 1:3 (1 cement: 3 coarse sand) (ii) 1:4(1 cement: 4 coarse sand)


cu.m. cu.m. cu.m.

6333.98 7399.55 6181.68

Page-51

Item D es c r i p t i o n No 8.2.2 Providing and laying six course water proof treatment with bitumen felt over roof consisting of first, third and fifth courses of blown or residual bitumen applied hot @ 1.45kg, 1.20kg and 1.45kg per sq.m of areas respectively, second and fourth courses of roofing with felt type 3 grade - I (hessain base self finished bitumen felt) and sixth and final course with stone grit 6mm and down per sq.m including preparation of surface, excluding grading complete.

8.2.3 Providing and laying four course water proofing treatment with bitumen felt over roof consisting of first and third courses of blown or residual bitument applied hot @ 1.45kg per sq.m of area for each course second course of roofing with felt type 3 grade 1 (hessian base self finished bitumen) and fourth and final course with stone grit 6mm and down size, felt pea gravel spread @ 0.006m3 per sq.m including preparation of surface, excluding grouting etc. as directed and specified.

U ni t

R at e

Sqm

253.7

Sqm

175.99 8.2.4 Providing and application of Insultech safeguard coating for heat reflecting and waterproofing of approved colour as per direction of engineer in charge

Sqm 453.07

8.2.5 Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonate sheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge. (a) Polycarbonate Sheet (Compact) (i) 3mm thick

Sqm

5265.42

(i) 4mm thick

Sqm

6271.78

(i) 6mm thick

Sqm

4093.46

(ii) 8mm thick

Sqm

4806.82

(iii) 10 mm thick

Sqm

5456.5

(i) 1.00mm thick

Sqm

1876.34

(ii) 1.20mm thick

Sqm

2080.16

(i) 1.0 mm thick

Sqm

735.92

(ii) 1.3 mm thick

Sqm

774.13

(iii) 1.5 mm thick

Sqm

863.31

(b) Polycarbonate Sheet (Multiwall)

(c ) Polycarbonate Sheet (76/16 Corrugated)

8.2.6 Providing laying and fixing of FINROOF Finolex PVC roofing sheet of approved thickness / colour and profile as per drawing and as directed by the engineer in charge (a) 76/16 Greca Profile

(b) 250/40 Industrial Profile (i) 1.8 mm thick

Sqm

971.58

(ii) 2.0 mm thick

Sqm

1041.65

(iii) 2.5 mm thick

Sqm

1169.04


Page-52

CH-9 : WOOD WORKS Item No 9.1 CHOWKATHS

Descrip tion

U n it

R at e

dressed wood work in post, walls,battens, post plate 9.1.1 Providing bressumers etc. includingsupplying and fixing with spikes, nails,bolt and nuts of 12mm dia(M.S) and required length etc.complete with kiricide oiling two coats to faces in contact with C.C or masonry (M.S flats, angle cleats and bolt and nuts required for flats,angle cleats wherever use shall be measured and paid separately) (a) With sal wood (b)With Hollock timber (c)WithBonsum/Sunditimber

Cum

Rs.98,776.83

Cum

Rs.56,388.61

Cum

Rs.57,577.71

(d)With Bola timber

Cum

Rs.49,716.53

(e)With2ndclasstreatedtimber

Cum

Rs.39,900.78

9.1.2 Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood (b) With1stclasstimber(Bonsum/Sundi)

Cum

Rs.121,163.03

Cum

Rs.77,474.00

9.2 ROOF TRUSS 9.2.1 Providing undressed wood work in roof truss, rafter, purlin, tie and the like including hoisting and fixing in position with necessary spikes, nails including M.S straps with bolt and nuts etc.complete with kiricide oiling two coats to all timber members and two coats of anticorrosive paint to M.S straps (M.S flats, angle cleats, and bolt and nuts required for flat and angle cleats wherever used shall be measured and paid separately) (a) With sal wood (b)WithHollock/Sundi/Sam (c)With2ndclasstreatedtimber 9.3

Cum

Rs.87,836.62

Cum Cum

Rs.51,443.43 Rs.35,715.37

CEILING AND PARTITION

9.3.1 Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid (a) With sal wood (b)WithGamari/Bonsum/Sundi

Cum Cum

9.4 BARGE BOARD 9.4.1 Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. 9.5

Rs.97,125.37 Rs.58,905.75 349.75

R.M.

PELMET

9.5.1 Providing and fixing 12 mm thick and 150mm wide pelmet with 25 mm dia wooden curtain rod and bracket including fixing with 15mmx3mm M.S flat 100mm long plugs complete. (a) FirstclassIndianTeakwood/Sisuwood

Vh-9 : Wood Works

R.M.

Rs.498.76

Page-53

Item No

Descrip tion

U n it

(b) First class local wood(Gamari)

R.M.

(c) First class local wood(Hollock/ Bonsum)

R.M.

(d) Veneeredparticleboard(12mmthick)

Rs.339.16 Rs.339.16

R.M.

e) Extra for providing and fixing brass curtain rail with rollers,stoppers and

R at e

Rs.484.60 R.M.

Rs.1,260.10

brakets in pelmet in stead of wooden curtain rods 25 mm dia with

brakets (actual length of the rods to be measured) f) Extra for providing andwooden fixing curtain 1.25 mm thick wire brass plate with braket instead of curtainrod rodof of 25mm dia brackets (actual length of the rods to be measured) 20 mm (i)dia.

R.M.

Rs.1,260.10

(ii) 25 mm dia.

R.M.

Rs.1,266.57

g) Extra for providing and fixing curtain rod of 1.25mm thick chromium plated with brass plate with to chromium plated brass brackets fixed with CP brass screws etc. complete.(actual length of the rods to be measured) mm 20 (I) dia. mm 25 (ii) dia.

R.M.

Rs.335.63

R.M.

Rs.335.63

9.5.2 Supplying, fitting and fixing pelmet to door and window frames with 12mm thick kit ply wood finished with matt finished sunmica on external faces and bottom and fixed with wooden brackets including providing 20mm dia aluminium hanger with necessary socket and clamps complete including inside painting as directed.

9.6

(a)With Sunmica

R.M.

Rs.2,344.41

(b)Without Sunmica

R.M.

Rs.1,826.39

ARCHITRAVE / BEADING

9.6.1 Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. (a)WithTeakwood/Sissuwood.

R.M.

Rs.166.37

(b)WithBonsum/Sundiwood.

R.M.

Rs.126.01

(e)With Holok timber

R.M.

Rs.124.82

(c)With Bola wood

R.M.

Rs.118.15

9.6.2 Providing and fixing 1st class timber moulded beading of size 25mm x 15mm around panel inserts of doors with countersunk wood screws including applying a coat of wood preservative on unexposed surface. (a)With Teak wood/Sissu wood.

R.M.

Rs.115.30

(b)With Bonsum/ Sundi wood.

R.M.

Rs.100.66

(c)With Bola wood

R.M.

Rs.97.81

(d)With Gamarai Wood.

R.M.

Rs.100.66

(e)With Holok timber

R.M.

Rs.100.23

9.6.3 Providing and fixing 1st class timber beading for fixing clear sheet glass/ frosted glass including applying a coat of wood preservative on unexposed surface. (a)WithTeakwood/Sissuwood. (b) WithBonsum/ Sundi wood. (c)With Bola wood

Vh-9 : Wood Works

R.M. R.M. R.M.

Rs.65.85 Rs.51.64 Rs.51.20

Page-54

Item No

Descrip tion (d)With Gamarai Wood.

R.M.

(e) With Holok timber 9.7

U n it

R at e Rs.51.64

R.M.

Rs.51.20

Railing/Balustrade

9.7.1 Providing and fixing wooden 100mmx 60mm rounded hand rails in straight lengths complete. (a) With Teak wood/Sissu wood.

R.M.

Rs.882.53

(b) With 1st class local wood (Hollock )

R.M.

Rs.559.32

(c) With 1st class Bola wood

R.M.

Rs.507.41

(d) 1st class local wood (Gamari/Bonsum )

R.M.

Rs.568.57

9.7.2 Providing and fixing wooden 100mmx60 mm moulded hand rails in place of rounded hand rail. (a)With1stclassTeakwood/Sissuwood (b)With1stclasslocalwood(Hollock)

R.M.

Rs.1,323.79

R.M.

(c) With 1st class Bola wood

Rs.838.97 R.M.

(d)1stclasslocalwood(Gamari/bonsum)

9.7.3 Extra for hand rails if sunk to receive iron core. 9.7.4 Providing and fixing 25mmx25mm first class timber balustrade 25mmx25mm square, wrought fixed with ends housed (square or splayed) to hand rails and trends or strips complete. (a)With1stclassTeakwood/Sissuwood (b) With 1st class local wood (Gamari/Hollock/Bonsum ) (c) With 1st class Bola wood

Rs.761.12

R.M.

Rs.852.85 R.M.

Rs.57.92

R.M.

Rs.246.75 R.M.

Rs.220.72

R.M.

Rs.216.54

9.8 VENTILATING LOUVRE 9.8.1 Providing 1st class local wood (Hollock/Bonsum)ventilating louvre in 50mm x 38mm size wooden frame with 150mm x 20mm slate made of 1st class local wood including fitting and fixing with nails and painting with two coats of kiricide oiling complete. (i) 1st class local wood (Gamari/Bonsum/Holok) 9.8.2 Providing first clas local wood (Hollock/ Bonsum ventilating louvre of wooden frame (minimum size of frame members 150mm x 75mm) with clear

Sq.m.

Rs.1,689.07

Sq.m.

Rs.2,251.75

Sq.m.

Rs.3,675.18

glass/ frosted glassasincluding and fixing and painting two coats of kiricide oil complete directed fitting for all levels. 9.8.3 Providing Sal wood ventialating louvre of wooden frame (minimum size frame members 150mmx75mm) with clear glass/frosted glass including fitting and fixing and painting with two coats of kiricide oiling complete as directed for all levels. 9.9 DOO RS / WI NDOW S / VEN TILATORS / C LERE STO RY WIN DOWS 9.9.1 Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55 mm) with necessay screws including glass panes (other fittings to be measured and paid separately) A) With Teak wood / Sissu

wood.

(i) 40 mm thick.

Sq.m.

Rs.4,333.57

(ii) 35 mm thick.

Sq.m.

Rs.4,033.34

(iii) 30 mm thick.

Sq.m.

Rs.3,561.77

Vh-9 : Wood Works

Page-55

Item No

Descrip tion

U n it

R at e

B) With 1st class local wood (Gamari/Hollock/Bonsum ) (i) 40 mm thick.

Sq.m.

Rs.2,989.95

(ii) 35 mm thick.

Sq.m.

Rs.2,823.88

(iii) 30 mm thick.

Sq.m.

Rs.2,566.27

C) With 1st class Local wood ( Bola wood) (i) 40 mm thick.

Sq.m.

Rs.2,718.16

(ii) 35 mm thick.

Sq.m.

Rs.2,577.90

(iii) 30 mm thick.

Sq.m.

Rs.2,350.21

9.9.2 Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) A) With Teak wood / Sissu wood. (i) 40 mm thick.

Sq.m.

Rs.5,026.46

(ii) 35 mm thick.

Sq.m.

Rs.4,623.51

(iii) 30 mm thick.

Sq.m.

Rs.3,618.01

B) With 1st class local wood (Gamari/Hollock/Bonsum ) (i) 40 mm thick.

Sq.m.

Rs.3,316.46

(ii) 35 mm thick.

Sq.m.

Rs.3,150.88

(iii) 30 mm thick.

Sq.m.

Rs.2,532.56

C) With 1st class Local wood ( Bola wood) (i) 40 mm thick.

Sq.m.

Rs.3,265.22

(ii) 35 mm thick.

Sq.m.

Rs.3,103.58

(iii) 30 mm thick.

Sq.m.

Rs.2,500.03

9.9.3 Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) a) With Teak wood / Sissu

wood.

(i) 40 mm thick with panel inserts of 20mm thickness.

Sq.m.

Rs.5,377.75

(ii) 35 mm thick with panel inserts of 20mm thickness.

Sq.m.

Rs.4,593.09

(iii) 30 mm thick with panel inserts of 20mm thickness.

Sq.m.

Rs.4,390.23

(i) 40 mm thick with panel inserts of 20mm thickness.

Sq.m.

Rs.3,740.34


Sq.m.

Rs.3,303.89


Sq.m.

Rs.3,191.05

Sq.m.

Rs.3,692.10

b) With 1st class local wood (Hollock / Gamari/Sundi/ Bonsum)

c) With 1st class local wood (Bola/Sundi) (i) 40 mm thick with panel inserts of 20mm thickness.

Vh-9 : Wood Works

Page-56

Item No

Descrip tion

U n it

R at e


Sq.m.

Rs.3,265.91


Sq.m.

Rs.3,155.72

Sq.m.

Rs.2,152.51

Sq.m. Sq.m.

Rs.2,152.51

(a) Using Bonsum/Holok wood

Sq.m.

Rs.1,931.47

(b) Using Gamari wood

Sq.m.

Rs.1,931.47

9.9.4 Providing fitting and fixing 1st class local wood battened, framed and braced door and window shutters including oxidised iron butt hinges (100mm x58 mm x1.90 mm) 6 nos with necessay screws. (a) Using Bonsum/Holok wood (b) Using Gamri wood 9.9.5 Providing fitting and fixing 1st class local wood battened and framed door and window shutters including oxidised iron butt hinges (100mmx 58mmx 1.90mm) 6 nos with necessay screws.

9.9.6 (a) Providing fitting and fixing 1st class local wood battened, ledged and braced door and window shutters including oxidised iron butt hinges (100mmx 58mmx1.90mm) 6 nos with necessay screws. (a) Using Bonsum/Holok wood (i) 25mm thick

Sq.m.

Rs.3,303.39

(ii) 20mm thick

Sq.m.

Rs.2,871.47

(i) 25mm thick

Sq.m.

Rs.3,303.39

(ii) 20mm thick

Sq.m.

Rs.2,871.47

(i) 40mm thick

Sq.m.

Rs.3,013.90

(ii) 35mm thick

Sq.m.

Rs.2,604.24

(iii) 30mm thick

Sq.m.

Rs.2,351.00

(i) 40mm thick

Sq.m.

Rs.1,967.52

(ii) 35mm thick

Sq.m.

Rs.1,830.81

(iii) 30mm thick

Sq.m.

Rs.1,689.94

(i) 40mm thick

Sq.m.

Rs.1,941.52

(ii) 35mm thick

Sq.m.

Rs.1,808.02

(iii) 30mm thick

Sq.m.

Rs.1,670.47

(b) Using Gamari wood

9.9.7 Providing, fitting and fixing fully glazed window with sash bars including oxidised M.S butt hinges (75mmx 60mmx3.15mm) 2nos.on each leaf and 3 nos. on single leaf (glass panes to be measured and paid separately) A) With Teak wood / Sissu

wood.

B) With Holock/Gamari/Bonsum wood.

C) With 1st class local wood

9.9.8 Providing, fitting and fixing fully glazed window without intermediate sash bars including oxidised M.S butt hinges (75mm x 60mm x 3.15mm) 2nos.on each leaf and 3 nos. on single leaf (glass panes to be measured and paid separately) 9.9.9 Providing, fitting and fixing fully glazed clerestory window and fan light including fitting and fixing 2 M.S pivot hinges (75mm x 20mm x 3mm), eye hook and nylon chord complete (glass panes shall be measured and paid separately)

Vh-9 : Wood Works

Page-57

Item No

Descrip tion A) With Teak wood / Sissu

U n it

R at e

wood.

(i) 40mm thick

Sq.m.

Rs.2,484.49

(ii) 35mm thick

Sq.m.

Rs.2,286.07

(iii) 30mm thick

Sq.m.

Rs.2,279.95

(i) 40mm thick

Sq.m.

Rs.1,758.06

(ii) 35mm thick

Sq.m.

Rs.1,647.69

(iii) 30mm thick

Sq.m.

Rs.1,528.12

(i) 40mm thick

Sq.m.

Rs.1,736.65

(ii) 35mm thick

Sq.m.

Rs.1,628.88

(iii) 30mm thick

Sq.m.

Rs.1,512.12

B) With Holock/Gamari/Bonsum wood.

C) With 1st class local wood

9.9.10 Providing, fitting and fixing fully glazed wooden door shutters with necessary butt hinges, screws etc. complete as per approved drawing as directed and specified at all levels.(fittings e.g. tower bolt, door handle, aldrop, glass panes etc. should be measured and paid seperately.) (a) With Teak or Sissu Wood (I)40mm thick

Sq.m.

Rs.2,533.85

(II)35mm thick

Sq.m.

Rs.2,341.13

(I)40mm thick

Sq.m.

Rs.1,846.28

(II)35mm thick

Sq.m.

Rs.1,739.05

(I)40mm thick

Sq.m.

Rs.1,712.33

(II)35mm thick

Sq.m.

Rs.1,621.76

(b) With Gamari Wood.

(c) With 1st class local wood

9.10 VENEERED PARTICLE BOARD DOOR SHUTTERS 9.10.1 Providing, fitting and fixing factory made ext eri or typ e ful ly pan ell ed sin gle l ea f do or sh ut te rsof approved brand conforming to relevent I.S code having kiln seasoned and vacuum pressure treated Hollock / Bonsum / Sundi rail and styles with pannel of Anchor brand 12mm thick veneered Teak wood particle board bonded with phenol - formaldehyde synthetic resin adhesive conforming to relevent I.S code including 4 nos of oxidised iron butt hinges (100mm x75 mm x3.55mm) to each leaf complete. (i) 40mm thick

Sq.m.

Rs.2,289.07

(ii) 35mm thick

Sq.m.

Rs.2,189.00

(iii) 30mm thick

Sq.m.

Rs.2,088.33

9.10.2 Extra for double leaf door shutters, 10% cost for single leaf shutters as in item nos 9.10.1 9.11 CUPBOARD SHUTTERS 9.11.1 Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) (i) Using wooden plank a)With Teak wood / Sissu

Vh-9 : Wood Works

wood.(fully panelled)

Sq.m.

Rs.2,650.88

Page-58

Item No

Descrip tion

U n it

R at e

b) With Gamari/ Sundi/ Bonsum wood.

Sq.m.

Rs.2,028.73

c) With 1st class local timber.

Sq.m.

Rs.2,028.73

d) With 1st class local timber (Hollock )

Sq.m.

Rs.2,010.26

a) With Teak wood particle board (12mm thick)

Sq.m.

Rs.2,658.24

b) With Teak wood particle board (19mm/20mm thick)

Sq.m.

Rs.2,964.21

c) With block board (both side commercial 16mm thick)

Sq.m.

Rs.1,819.36

d) With block board (both side commercial 19mm/20mm thick)

Sq.m.

Rs.2,985.88

e) With block board (one side commercial and other side teak 12mm thick)

Sq.m.

Rs.2,093.46

f) With block board (one side Teak and other sidecommercial 19mm/20mm thick)

Sq.m.

Rs.2,985.88

(g) With Anchor brand veneered, plyboard formaldehyde synthetic resin 12 mm thick.

Sq.m.

Rs.2,326.77

Sq.m.

Rs.3,190.73

(ii) 35 mm thick .

Sq.m.

Rs.2,990.57

(iii) 30 mm thick .

Sq.m.

Rs.2,812.24

(iv) 25 mm thick .

Sq.m.

Rs.2,615.72

(i) 40 mm thick .

Sq.m.

Rs.2,493.20

(ii) 35 mm thick .

Sq.m.

Rs.2,293.03

(iii) 30 mm thick .

Sq.m.

Rs.2,114.71

(iv) 25 mm thick .

Sq.m.

Rs.1,918.18

(ii) Using Particle/Block bord

bonded

with

phenol

9.12 BLOCK BOARD SHUTTERS 9.12.1 Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorativetype face panel and block board core. (i) 40 mm thick .

b) Non decorative type and block board core.

c) One face decorative and other face nondecorative type and block board core. (i) 40 mm thick .

Sq.m.

Rs.2,857.13

(ii) 35 mm thick .

Sq.m.

Rs.2,656.96

(iii) 30 mm thick .

Sq.m.

Rs.2,439.99

(iv) 25 mm thick .

Sq.m.

Rs.2,253.77

(i) 40 mm thick .

Sq.m.

Rs.3,445.84

(ii) 35 mm thick .

Sq.m.

Rs.3,154.94

(iii) 30 mm thick .

Sq.m.

Rs.2,860.22

9.13 WIRE GAUGE SHUTTERS 9.13.1 Providing, fitting and fixing Wire gauge shutters using galvd. M.S. wire of I.S designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised M.S butt hinges (100mm x 58mm x1.90mm) A) With Teak wood / Sissu

Vh-9 : Wood Works

wood.

Page-59

Item No

Descrip tion

U n it

R at e

B) With Gamari/ Bonsum/ Sundi wood. (i) 40 mm thick .

Sq.m.

Rs.2,408.02

(ii) 35 mm thick .

Sq.m.

Rs.2,246.21

(iii) 30 mm thick .

Sq.m.

Rs.2,082.28

(i) 40 mm thick .

Sq.m.

Rs.2,377.44

(ii) 35 mm thick . (iii) 30 mm thick .

Sq.m. Sq.m.

Rs.2,219.44 Rs.2,059.36

(i) 40 mm thick .

Sq.m.

Rs.2,377.44

(ii) 35 mm thick .

Sq.m.

Rs.2,219.44

(iii) 30 mm thick .

Sq.m.

Rs.2,059.36

a) With 1st class local timber bead

Sq.m.

Rs.459.34

b) With 2nd class local timber bead

Sq.m.

Rs.407.03

a) With 1st class local timber bead

Sq.m.

Rs.521.56

b) With 2nd class local timber bead

Sq.m.

Rs.469.25

Sq.m.

Rs.2,159.12

Sq.m.

Rs.1,849.60

Sq.m.

Rs.2,378.21

Sq.m.

Rs.2,211.59

C) With 1st class local wood(Hollock)

D) With 1st class local wood. (Bola)

9.13.2 Providing, fitting and fixing Expanded metal 20mm x 60mm strands 3.25mm wide and 1.6mm thick for windows, openings etc. including fixing 50mm 20mm beading of timber with necessary nails, wood screws etc. complete

9.13.3 Providing, fitting and fixing fly-proof galvd. M.S. wire gauge of I.S. designation 85 G with wire of dia. of 0.56mm to windows and clerestory windows including timber beading of size 50mmx 20mm complete.

9.14.1 Supplying, fitting and fixing 30mm thick flush door(single leaf finished) made of phenol bonded Du ratu ff ex te ri or gr ad e (b ot h si de ) pl ai medium n density fibre board using 4 nos of hinges 125mm long ensuring that the hinges are not fixed less than 150mm from the edges with 8 nos. parallel sunk fully threaded screws 38mm long, should be used for fixing the hinges to the flush door after drilling a pilot hole 2.50mm dia 40mm long . Screws should not be hammered . Lock, tower bolts etc. necessary. (a) 30mm thick. i) Both side teak. ii) One side teak and other side commercial. (b) 40mm thick. i) Both side teak. ii) One side teak and other side commercial. 9.15 MISCELLENEOUS 9.15.1 Extra for using bright finished Nickel plated M.S piano hinges in place of oxidised M.S.butt hinges.

No

Rs.11.78

9.15.2 Extra for providing lapping with 1st class Teak wood battens of 25mm minimum depth on all edges of the shutters.

Sq.m.

Rs.424.48

9.15.3 Extra for wood work for each subsequent floor above 1st floor level.

cu.m.

Rs.153.10

9.15.4 Extra for fitting and fixing doors/windows for each subsequent floor above 1st floor level.

Sq.m.

Rs.8.83

9.15.5 Extra for providing lapping with 1st class Teak wood battens of 25mm minimum depth on all edges of the shutters.

Sq.m.

Rs.468.65

Vh-9 : Wood Works

Page-60

Item Descrip tion No 9.16.1 Providing, fitting and fixing Bison Panel board (Cement Bonded Particle Board) door shutters fixed to 100mmx38mm wooden frames with necessary hinges, screws, bolts etc. including painting of door shutters (one coat primer and two coats painting) complete as specified and directed by the department for all floors (Door fittings to be measured and paid separately)

U n it

R at e

(a) Using 10mm thick board (i)Bothsidescommercial

Sq.m.

Rs.1,960.30

(ii) One side laminated

Sq.m.

Rs.1,971.74

(iii)Bothsideslaminated

Sq.m.

Rs.1,924.58

(a) Using 16mm thick board (i)Bothsidescommercial

Sq.m.

Rs.1,934.13

(ii) One side laminated

Sq.m.

Rs.2,011.86

(iii)Bothsideslaminated

Sq.m.

Rs.2,208.63

9.17.1 Providing, fitting and fixing 38mm Mel ami ne fac ed pre -la min ate d cel lul ar c o r e F l u s h D o o r with 9mm/12mm thick high density exterior grade laminated particle board fixed to the internal wooden frame of Sal/Hollock wood with Polyurestene central core, fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels.(Door fixtures to be measured and paid separately.) (a)With Bhutan Board-Exterior Grade

(One side Decorative)

(i) 9 mm thick

Sq.m.

Rs.1,858.03

(ii) 12mm thick

Sq.m.

Rs.2,091.04

(b)With Nepal Board-Exterior Grade

(One side Decorative)

mm 9 (i) thick

Sq.m.

(ii) 12mm thick

Sq.m.

Rs.1,607.13 Rs.1,728.14

9.18.1 Providing, fitting and fixing factory made Sa nt r o Fl us h do or sh ut te r s having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) mm thick 30 (a) 35mm (b)thick mm thick 40 (c)

Sq.m. Sq.m. Sq.m.

Rs.1,988.33 Rs.2,123.11 Rs.2,282.67

9.19. DUROSAM DOORS, WINDOWS & CHOWKHATS 9.19.1 Providing, fitting and fixing Natural Fibre Thermosets Composite of jute, polymer and chemicals, Durosam make door and window frames (chowkhats) fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. (a) 75mm 50mm x Solid Frame.

R.M.

Rs.1,256.89

(b) 50mm 25mm x Solid Frame.

R.M.

Rs.731.77

(c)75mmx50mmGroovedFrame.

Vh-9 : Wood Works

R.M.

Rs.1,030.98

Page-61

Item Descrip tion U n it No 9.19.2 Providing, fitting and fixing Na tu ral Fi br e Th er mo se ts Co mp os it e of jute , e door/ window shutters fixed to the pol yme r and che mic als , Dur osa m mak door/ window frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door/ window fixtures and fittings to be measured and paid seperately.) (a) Solid Core moulded/ Fabricated/ Panelled/ Glazed Doors Flush (b)Doors

Sq.m. Sq.m.

(c)Solid Core moulded/ Fabricated/ Panelled/ Glazed Windows 9.20.1 Providing fitting and fixing compressed ready to fit Godrej make wood door shutter (Godrej Entranza Moulded Panel Door) for various thickness Conforming to IS 15380-2003,printed,shutter comprising of High Density Fiberboard skins (HDF) of 3.5 mm (hardened finely processed natural wood fibre) with panel design compressed on both faces,sandwitching, termite and borer resistant chemical treated and kiln seasoned wooden stiles and rails of 50mm-60mm width,lock block and high density flax board core / chemical treated and kiln seasoned timber core infil. The panel would be of different design viz. Two panel,Four panel,Six panel (both side) Shutter should be bonded with Phenol Formaldehyde or adhesive / conforming to BWP grade of IS 848.Shutter should have trim ability option of 12.5 mm from all sides. The door should have flexibility for painting or polishing to match an interiors. (i) 32 mm thick with panel inserts of 20mm thickness.

R at e

Rs.6,251.82 Rs.3,357.58

Sq.m.

Rs.4,088.72

Sq.m.

Rs.2,826.48


Sq.m.

Rs.2,918.15


Sq.m.

Rs.3,223.87

Vh-9 : Wood Works

Page-62

Ch-10: GRILL Item No. 10


U ni t

Rat e

GR I L L S

10.1 Providing, fitting and fixing M .S . rou n d bars wi th M .S . f lastiffeners t at required spacing in wooden frames of windows and clerestory windows

Kg

Rs.76.22

10.2 Providing, fitting and fixing M. S. gr il l of re quir ed patt erfor n windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill

(a) Fixed to wooden frames (b) Fixed steel to frames

Kg

Rs.84.55

Kg

(c) Fixed to Brickwork/P.C.C/R.C.C.

Rs.84.16 Kg

Rs.88.74

II Ornamental grill

(a) Fixed to wooden frames

Kg

Rs.101.34

(b) Fixed to steel frames

Kg

Rs.100.58

(c) Fixed to Brickwork/P.C.C/R.C.C.

Kg

Rs.106.20

10.3 Supplying, fitting and fixing an odis ed al um in iu m decora ted griwith ll anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or

Sqm

Rs.2,098.22

Sqm

Rs.1,150.47

stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer) 10.4 Extra for providing sec urity gri llwelded to casement window frames With 16mm dia M.S round placed horizontally at a distance of 10 cm c/c @ 15kg/ 16kg per sq.meter as per approved drawing.

Ch-10 : Grill Works

Page-63

CHAPTER-11: ALUMINIUM DOORS, WINDOWS AND OTHER WORKS Description

Item No.

U ni t

R at e

WINDOWS AND VENTILATORS

11.1.1 Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators

mm 6clear i) glass

Sqm

Rs.5,980.92

ii)5mm frosted glass iii) 6mm coloured glass

Sqm

Rs.6,020.77

Sqm

Rs.6,136.02

iv) 5 mm clear glass

Sqm

Rs.5,852.89

v) 5 mm coloured glass

Sqm

Rs.6,007.99

(b)Fixed windows and ventilators 6mm i) clear glass

Sqm

Rs.2,700.05

5mm ii) frosted glass

Sqm

Rs.2,739.91

iii) 6mm coloured glass

Sqm

Rs.2,855.14

iv) 5 mm clear glass

Sqm

Rs.2,572.03

v) 5 mm coloured glass

Sqm

Rs.2,668.85

11.1.2 Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (i)6mm clear glass

Sqm

(ii)5mm frosted glass

Sqm

(iii)6mm coloured glass

Sqm

Rs.4,766.85 Rs.4,302.54 Rs.4,414.41

(iv) 5 mm clear glass

Sqm

Rs.4,627.17

(v) 5 mm coloured glass

Sqm

Rs.5,224.19

(b)3 Track sliding window (i)6mm clear glass

Sqm


Sqm


Sqm

Rs.4,839.56 Rs.4,878.26 Rs.4,990.13


Sqm

Rs.4,712.14


Sqm

Rs.4,865.83

11.1.3 Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately).

Ch-11 : Alluminium Doors, Windows other Works

Page-64

Description

Item No.

U ni t

R at e

a)Side hung and Top hung windows and ventilators

(i)6mm clear glass

Sqm

Rs.6,972.55


Sqm

Rs.6,082.45


Sqm

Rs.6,194.32


Sqm

Rs.5,919.46


Sqm

Rs.6,070.02

(b)Fixed windows and ventilators

(i)6mm clear glass

Sqm

Rs.2,712.60


Sqm

Rs.2,751.30


Sqm

Rs.2,863.17


Sqm

Rs.2,588.31


Sqm

Rs.2,738.87

11.1.4 Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window

(i)6mm clear glass

Sqm


Sqm


Sqm

Rs.4,949.42 Rs.4,988.12 Rs.5,099.98


Sqm

Rs.4,825.12


Sqm

Rs.5,085.13

(b)3 Track sliding window

(i)6mm clear glass

Sqm


Sqm


Sqm

Rs.5,046.09 Rs.5,084.78 Rs.5,296.66


Sqm

Rs.4,921.79


Sqm

Rs.5,072.35

11.1.5 a) Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm prelaminated boards and providing and fixing handles, angle cleat, rubber gusket,roller bolting device, screws as required complete as specified and directed for all levels. (a) In Normal anodised Aluminium section (i) With 6mm thick glass panes

Sqm

Rs.4,967.67

(ii) With 5mm thick glass panes

Sqm

Rs.4,653.47

Sqm

Rs.5,245.61

(b) In Coloured anodised Aluminium section (i) With 6mm thick glass panes (ii) With 5mm thick glass panes 1 1. 2

D O O RS


Sqm

#REF!

Page-65

Description

Item No.

U ni t

R at e

11.2.1 Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. 6mm (i) clear glass

Sqm

Rs.10,422.37

(ii) 5mm frosted glass

Sqm

Rs.10,461.07

(iii) 6mm coloured glass

Sqm

Rs.10,572.94

(iv) Prelaminated Board mm (v) 5clear glass (vi) mm 5 coloured glass

Sqm Sqm Sqm

Rs.10,506.21 Rs.10,298.08 Rs.10,448.64

11.2.2 Providing,fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 63mm x 38mm x 2.5mm section of approved brand with door style of size 50mm x 45mm x 2.0mm, top rails 50mm x 45mm x 2.5mm, middle rail 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. 6mm (i) clear glass (ii) 5mm frosted glass

Sqm Sqm

(iii)6mmcolouredreflectoryglass

Sqm


Sqm Sqm

Rs.9,906.66 Rs.9,945.36 Rs.11,585.84 Rs.9,990.51 Rs.9,782.37

Sqm

Rs.9,932.93

11.2.3 Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i)6mm clear glass

sqm

Rs.10,561.74


sqm

Rs.10,600.44


sqm

Rs.10,712.30

(iv) Prelaminated Board

sqm

Rs.10,645.58

mm (v) 5clear glass (vi) mm 5 coloured glass

sqm sqm

11.2.4 Providing,fitting and fixing coloured anodised aluminuim framed glazed doors with anodised aluminium frame made of 63mm x 38mm x 2.5mm section of approved brand with door style of size 50mm x 45mm x 2.0mm, top rails 50mm x 45mm x 2.5mm, middle rail 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.


Rs.10,623.47 Rs.10,588.01

Page-66

Description

Item No.

U ni t

R at e

(i)6mm clear glass

Sqm

Rs.10,221.86


Sqm

Rs.10,260.56


Sqm

Rs.10,372.42

(iv) Prelaminated Board mm (v) 5clear glass

Sqm

Rs.10,305.70 Rs.10,097.56

(vi) mm 5 coloured glass

Sqm Sqm

Rs.10,248.13

11.2.5 Providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section of approved brand with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels. (i)6mm clear glass

Sqm


Sqm

Rs.7,528.25


Sqm

Rs.7,617.90


Sqm

Rs.7,497.23

Rs.7,564.43

(v) 5 mm clear glass

Sqm

Rs.7,397.62

(vi) 5 mm coloured glass

Sqm

Rs.7,518.28

11.2.6 Providing, fitting and fixing anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section of approved brand with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels. (i)6mm clear glass

Sqm

Rs.7,116.53


Sqm

Rs.7,147.54


Sqm

Rs.7,237.19


Sqm

Rs.7,582.41


Sqm

Rs.7,016.91

Sqm

Rs.7,137.58

11.2.7 Providing, fitting and fixing coloured anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm sections of approved brand with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (i)6mm clear glass

Sqm

Rs.6,647.53


Sqm

Rs.6,678.02


Sqm

Rs.6,766.16


Sqm

Rs.6,713.59



Sqm Sqm

Rs.6,549.59 Rs.6,668.23

Page-67

Description

Item No.

U ni t

R at e

11.2.8 Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (i)6mm clear glass

Sqm

Rs.6,416.13


Sqm

Rs.6,446.62


Sqm

Rs.6,534.77


Sqm Sqm Sqm

Rs.6,377.62

11.2.9 Providing and fixing anodised aluminium framed double leaf doors of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mm x15mm x1.2mm complete with automatic floor mounted door closure, butterfly type handles, special cylindrical lock, concealed type aluminium tower bolt,neoprene dryset rubber gusket, door felt gusket, etc.com lete as directed b the De artment at all levels. (i)5mm thick frosted glass and 12mm thick prelaminated particle board Sqm (ii)6mm clear glass Sqm (iii)5mm plain frosted glass

Rs.6,482.19 Rs.6,258.98

Sqm

Rs.7,616.42 Rs.7,428.10 Rs.7,513.88

(iv)6mm coloured glass

Sqm

Rs.7,606.44

(v) Prelaminated Board

Sqm

Rs.7,497.47

(vi) mm 5clear glass (vii) mm 5 coloured glass

Sqm

Rs.7,316.56

Sqm

Rs.7,449.83

11.2.10 Providing and fixing anodised aluminium framed double leaf doors of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mm x15mm x1.2mm complete with automatic floor mounted door closure, butterfly type handles, special cylindrical lock, concealed type aluminium tower bolt,neoprene dryset rubber gusket, door felt gusket, etc.complete as directed by the Department at all levels. (a) Double leaf doors (i)5mm thick frosted glass and 12mm thick prelaminated particle board (ii)6mm clear glass

Sqm Sqm

Rs.7,660.40 Rs.7,609.01

(iii)5mm plain frosted glass

Sqm

Rs.7,641.02


Sqm

Rs.7,733.59

(v) Prelaminated Board (vi) mm 5clear glass

Sqm

Rs.7,661.89 Rs.7,610.60

(vii) mm 5 coloured glass

Sqm Sqm

11.2.11 Providing and fixing anodised aluminium framed single leaf door of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt,neoprene dryset rubber gusket, etc.complete as directed by the Department at all levels. Ch-11 : Alluminium Doors, Windows other Works

Rs.7,721.20

Page-68

Description

Item No.

U ni t

(i)5mmthickfrostedglassand12mmthickprelaminatedboard (ii)6mm clear glass

Sqm Sqm

Rs.7,260.59 Rs.7,050.29


Sqm

Rs.7,085.79


Sqm


Rs.7,188.41

Sqm

Rs.7,127.20

Sqm

Rs.6,936.27

(vii) mm 5 coloured glass Sqm 11.2.12 Providing and fixing coloured anodised aluminium framed single leaf door of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mm x 15mm x 1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt, neoprene dryset rubber gusket, etc.complete as directed by the Department at all levels.

Rs.7,074.39

(i)5mmthickfrostedglassand12mmthickprelaminatedboard (ii)6mm clear glass

Sqm Sqm

Rs.7,426.85 Rs.7,216.56


Sqm

Rs.7,252.06


Sqm

Rs.7,354.67


Sqm

Rs.7,293.47 Rs.7,102.54

Sqm

(vii) mm 5 coloured glass 11 .3

R at e

Sqm

Rs.7,203.13

MI SC EL LA NE OU S

11.3.1 Suppling, fitting and fixing 20mm dia aluminium rod with aluminium bracket at both ends of the pelmet over door and windows as directed and specified at all levels.

M

Rs.115.44

11.3.2 Providing and fixing aluminium step edging with anodised aluminium angle to stairs at all levels. (i)Withangleofsize38mmx12mmx3mm (ii)Withanglesofsize57mmx12mmx3mm

M

Rs.250.81

M

Rs.285.94

11.3.3 Extra over item 11.3.2 for cutting R.C.C./brick steps for fixing of aluminium strip ed in and makin ood to match the surroundin s. 11 .4 PA RT IT IO N WA LL S

M

Rs.48.55

11.4.1 Providing, fitting and fixing partition walls of standard sections of approved brand, jointsanodised mitred aluminium and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (i)Partly 6mm thick glass panesand 12mm prelaminatedply board

Sqm

Rs.3,429.01

(ii)6mm clear glass

Sqm

Rs.3,593.12

(iii)5mm frosted glass

Sqm

Rs.3,242.28


Sqm

Rs.3,345.88


Sqm

Rs.3,225.66

(v)Partly 5mm thick glass panesand 12mmprelaminatedply board (vi) mm 5clear glass

Sqm

Rs.3,297.45 Rs.3,091.34



Sqm Sqm

Rs.3,230.77

Page-69

Description

Item No.

U ni t

R at e

11.4.2 Providing, fitting and fixing coloured anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (i)Partly 6mm thick glass panes and 12mm prelaminated ply board (ii)6mm clear glass

Sqm Sqm

Rs.3,586.86 Rs.3,364.29


Sqm

Rs.3,400.12


Sqm

Rs.3,503.72


Sqm

Rs.3,383.50

(vi)Partly 5mm thick glass panes and 12mm prelaminated ply board (viii) mm 5 clear glass (viii) mm 5 coloured glass

Sqm Sqm

Rs.3,530.55 Rs.3,249.18

Sqm

Rs.3,388.61

11.4.3 Providing, fitting and fixing anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of pre-laminated board/ Nepal board/ Bhutan board with tapper cleat 20mm x 15mm x 1.2mm thick as directed by the department at all levels. (i)6mm clear glass

Sqm

Rs.3,581.54


Sqm

Rs.3,592.15


Sqm

Rs.3,619.62

(iv) Prelaminated Board mm (v) 5clear glass

Sqm

Rs.3,685.73 Rs.3,551.02

(vi) mm 5 coloured glass

Sqm Sqm

Rs.3,589.10

11.4.4 Providing, fitting and fixing coloured anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of pre-laminated board/ Nepal board/ Bhutan board with tapper cleat 20mm x 15mm x 1.2mm thick as directed by the department at all levels. (a)2 Track sliding window (i)6mm thick clear glass

Sqm Sqm

Rs.3,642.40

(iii)6mm thick coloured glass

Sqm

Rs.3,705.93

(iv) Prelaminated Board (v) mm 5 thick clear glass (vi) mm 5 thick coloured glass 11 .5

Rs.3,668.96

(ii)5mm thick frosted glass

Sqm Sqm

Rs.3,772.04 Rs.3,638.44

Sqm

Rs.3,675.41

PA RT IT IO N W AL LS WI TH DOO RS

11.5.1 Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels. (i)6mmthickglasspanesand12mmprelaminatedboard Ch-11 : Alluminium Doors, Windows other Works

Sqm

Rs.3,689.31

Page-70

Description

Item No.

U ni t

R at e

(ii)6mm clear glass

Sqm

Rs.3,611.06


Sqm

Rs.3,638.42


Sqm

Rs.3,715.36

Sqm Sqm

Rs.3,668.19 Rs.3,624.59 Rs.3,521.02

(v) Prelaminated Board (vi)5mmthickglasspanesand12mmprelaminatedboard (vii) mm 5clear glass

Sqm

(viii) mm 5 coloured glass Sqm 11.5.2 Providing, fitting and fixing coloured anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gasket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels. (i)6mm thick glass panes and 12mm prelaminated board Sqm (ii)6mm clear glass Sqm

Rs.3,627.48

Rs.3,857.22 Rs.3,778.97


Sqm

Rs.3,806.33


Sqm

Rs.3,885.43


Sqm

Rs.3,838.25

(vi) 5 mm thick glass panes and 12mm prelaminated board (vii) mm 5clear glass

Sqm Sqm

(viii) mm 5 coloured glass

Rs.3,846.47 Rs.3,691.09

Sqm

Rs.3,797.54

11.5.3 Providing, fitting and fixing anodised aluminium framed sliding glazed doors with partition walls with anodised aluminium frames made of 100mm x 43mm x 2mm section of approved brand with door style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, paints and 12mm prelaminated board fitting with glazing clip, special type rubber gasket complete including roller, door handle, lock angles, cleat etc. complete as directed by the department at all levels. (i)Partly 6mm thick coloured reflectory glass and partly with prelaminated board

Sqm

Rs.5,882.03

(ii)6mm clear glass

Sqm

Rs.4,488.98


Sqm

Rs.4,491.48

(iv)6mm coloured glass (v) Prelaminated Board

Sqm Sqm

Rs.4,646.02 Rs.4,576.42

(vi) mm 5clear glass

Sqm


Rs.4,359.33

Sqm

Rs.4,516.37

11.5.4 Providing, fitting and fixing coloured anodised aluminium framed sliding glazed doors with partition walls with anodised aluminium frames made of 100mm x 43mm x 2mm section of approved brand with door style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, paints and 12mm prelaminated board fitting with glazing clip, special type rubber gasket complete including roller, door handle, lock angles, cleat etc. complete as directed by the department at all levels. (i)Partly 6mm thick coloured reflectory glass and partly with prelaminated board

Sqm

Rs.6,103.98

(ii)6mm clear glass

Sqm

Rs.4,710.92


Sqm

Rs.4,751.28

(iv)6mm cloured glass

Sqm

Rs.4,867.96


Page-71

Description

Item No.

U ni t

(v) Prelaminated Board (vi) mm 5clear glass (vii) mm 5 cloured glass

Sqm

R at e

Rs.4,798.37

Sqm

Rs.4,581.28

Sqm

Rs.4,738.32

11.5.5 Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with partition walls partly glazed and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with door styles of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81 mm x 43mm x 2mm fitting with glazing clips, special type rubber gasket including hydraulic floor spring at all levels. (i)6mmthickglasspanesand12mmprelaminatedboard (ii)6mm clear glass

Sqm

Rs.5,674.16 Rs.5,552.81


Sqm

Rs.5,592.42


Sqm

Rs.5,706.93


Sqm

Rs.5,638.63

Sqm

Rs.5,582.85 Rs.5,425.58

Sqm

Rs.5,579.70

(vi)5mmthickglasspanesand12mmprelaminatedboard (vii) 5 mm clear glass

Sqm

Sqm

(viii) 5 mm coloured glass 11.5.6 Providing, fitting and fixing coloured anodised aluminium framed double leaf glazed doors with partition walls partly glazed and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with door styles of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm fitting with glazing clips, special type rubber gasket including hydraulic floor spring at all levels. (i)6mmthickglasspanesand12mmprelaminatedboard

Sqm

Rs.5,893.12

(ii)6mm clear glass

Sqm

Rs.5,771.78


Sqm

Rs.5,811.39


Sqm

Rs.5,925.89


Sqm

Rs.5,857.60

Sqm

Rs.5,801.82 Rs.5,644.55

Sqm

Rs.5,798.66

(i)6mm clear glass

Sqm

Rs.3,718.46


Sqm

Rs.3,749.17


Sqm

Rs.3,837.94


Sqm

Rs.3,865.87

Sqm Sqm

Rs.3,939.00 Rs.3,619.83

Sqm

Rs.3,739.30

(vi)5mmthickglasspanesand12mmprelaminatedboard (vii) 5 mm clear glass

Sqm

(viii) 5 mm coloured glass 11.5.7 Providing, fitting and fixing anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of glass panes and pre-laminated board with tapper cleat 20mm x 15mm x 1.2mm thick fixing glass panes with rubber gusket, screws, etc. as directed by the department at all levels.

(v)12mm thick pre-laminated board and 5mm thick frosted glass panes (vi) 5 mm clear glass (vii) 5 mm coloured glass


Page-72

Description

Item No.

11.5.8 Providing, fitting and fixing coloured anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of glass panes and pre-laminated board with tapper cleat 20mm x 15mm x 1.2mm thick fixing glass panes with rubber gusket, screws, etc. as directed by the department at all levels. (i)6mm clear glass

U ni t

R at e

Sqm

Rs.3,915.39

(ii)5mm plain frosted glass

Sqm

Rs.3,936.79


Sqm

Rs.3,998.62


Sqm

Rs.3,961.74

(v)12mm thick pre-laminated board and 5mm thick frosted glass panes

Sqm

Rs.3,936.79

(vi) 5 mm clear glass

Sqm

Rs.3,860.61

(vii) 5 mm coloured glass

Sqm

Rs.3,943.83

Sqm

Rs.6,963.74

11.6 CURTAIN WALL, CURT AIN GLAZING, STRU CTURAL GLAZING 11.6.1 Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with anodised aluminium section of approved brand of size 101mm x 44.50mm by providing aluminium jointing angles including providing 6mm thick coloured

reflectory type glass fitted with aluminium at all levels. 11.6.2 Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand of size 101mm x 44.50mm by providing aluminium jointing angles including providing 6mm thick coloured reflectory type glass fitted with aluminium at all levels. (i)Partly 6mm thick coloured reflectory glass and partly with prelaminated board

Sqm

Rs.7,419.93

(ii)6mm clear glass

Sqm

Rs.5,523.88


Sqm

Rs.5,561.51


Sqm

Rs.5,581.58


Sqm

Rs.5,932.14

Sqm

Rs.5,549.24

Sqm

Rs.5,643.86

Sqm

Rs.7,978.54

11.6.3 Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with coloured anodised aluminium section of approved brand 101mm x 55mm x 2mm by providing jointing angles including providing coloured reflectory type glass 6mm thick fitted with aluminium at all levels. 11.6.4 Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with anodised aluminium section of approved brand 101mm x 55mm x 2mm by providing jointing angles including providing coloured reflectory type glass 6mm thick fitted with aluminium at all levels. 11.6.5 Providing and fixing of aluminium curtain glazing made out of Anodised section of approved shade section of 6 nos 1.2m each @ 1.819 Kg/m, 6 nos 1.2m each @ 0.515 Kg/m, 6 nos 1.2m each @ 0.317 Kg/m of Jindal or equivalent complete with rubber gasket and all other accessories, including fixing of 5mm tinted glass as and where necessary. I) Using Plain Anodised section


Page-73

Description

Item No.

U ni t

R at e

Sqm

Rs.8,337.78

11.6.6 Providing , fabrication and fixing of structural glazing made out of Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural silicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary.

Sqm

Rs.8,972.57

11.6.7 Providing , fabrication and fixing of structural glazing made out of coloured Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural selicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary.

Sqm

Rs.9,394.97

(a) door Automatic ST10S

Each

Rs.98,881.98

(b) door Automatic ST10D

Each

Rs.112,615.59

(c) door Automatic ST20 S

Each

Rs.137,336.08

(d) door Automatic ST20 D

Each

Rs.168,923.38

(a) with 12 mm thick toughened glass

Sqm

Rs.10,891.60

(b) with 10 mm thick toughened glass

Sqm

Rs.11,098.68

(c) with 8 mm thick toughened glass

Sqm

Rs.10,650.63

(d) with 12 mm thick coloured glass

Sqm

Rs.10,846.71

(e) with 10 mm thick coloured glass

Sqm

Rs.10,891.60

(f) with 8 mm thick coloured glass

Sqm

Rs.10,650.63

II) Using Coloured Anodised section

11.7.1 Supplying,fitting and fixing of Automatic sliding door and operator, modular design including internal cover with operator dimensions (H X T) not exceeding 120mm x 175mm and of length required to suit the opening size given below: Clear opening of size 2400mm X 2400mm: compact linear sliding door automatic, with self cleaning rollers, TUV type tested as per DIN 18650.The Automatic sliding door consists of 16 bit Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-teaching. Operating Modes: Continuous open, automatic operation, closing time, night lock, multi-sensor detector(radar motion detector with direction detecion and self-monitoring, double 3D safeguard light curtain (light barrier) for convenient safeguarding of the opening width) with Electro magnetic locking, integrated in the drive unit, with manual emergency unlocking of GODREJ/GEZE make.The operator will be provided with short circuit proof power supply unit 220 / 240 V, 50 / 60 hz .

11.7.2 Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels.


Page-74

CH-12 PVC, uPVC, FRP DOORS & DOOR FRAMES Item No.

D es c r i p t i onofw or k s

U ni t

Rat e

P.V.C. DOORS & DOOR FRAMES

12.1

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels.

12.2

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC

Rm

186.12

a) 24mm thick

Sqm

999.44

b) 29mm thick

Sqm

1,511.53

Providing, fitting and fixing PVC door frame of Duroplast make DPF-5060 make suitable for DPS-3720 made from extruded PVC multichamber hollow section having dimensions of 50mmx60mm (Toletance + 1mm). Horizontal and vertical sections shall be joined by steel screws after inserting M.S. tubular rectangular galvanised L-shaped brackets of size 100mmx100mm or plastic brackets of size 75mmx75mm with metred cut at the corners. Hinge side of the frame shall be reinforced with M.S.Tubular section of size 40mmx20mm. The frame will be fixed to the column/ stiffner/ wall with the help of 3 nos 75mm long and 4mm dia steel screws and expandable fastners on each side of the door frame complete in all

Rm

700.79

Sqm

1,511.53

Sqm

1,947.01

door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately)

12.3

12.4

12.5

res ects as se cified and directed at all levels. Providing, fitting and fixing PVC Door shutters of Duroplast DPS 3720 make made fromm extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Toletance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic Lshaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels. (Door fixtures and fittings to be measured and aid se eratel Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement. The lock rail is made of extruded hollow PVC section in the configuratino of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.)

Ch-12 : PVC/FRP Doors Door Frames

Page-75

Item No.

12.6


Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.The lock rail is made of extruded hollow PVC section in the configuratino of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm.

U ni t

Rat e

Rm

209.70

Sqm

2,647.85

The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.) 12.7

FRP PANNELED DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) panneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge.

12.8

FRP PANNELED DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) panneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge.

Sqm

3,047.82

12.9

FRP FRAME providing & fixing of factory made Fibreglass Reinforced Plastic (FRP) door frame of FIBREWAYS having three legged of cross section 90mmx45mm having single rebet of 32 mmx15mm to receive shutter of 30 mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyster resin

Sqm

575.50

Sqm

1,121.04

and mat .Door laminate be filled with suitable blockchopped in all the three legsframe the frame shalland be shall covered with covered glass wooden from all sides. MS stay shall be provided at the bottom to steady the frame. 12.10 FRP SHEET MACHINE MADE supplying & fixing of factory Machine made Fibreglass Reinforced Plastic (FRP) Translucent Roofing u/v stabilized sheets of ROOFFIT in desired thickness ,size profile -(plain,corrugated,trapezoidal ) & colour manufactured as per IS 12866 on continuous machine auto controlled production line with auto batching,bubble free mixer,impregnation ,heating,refractor system using continuous glass fibre roving of 2400 tex reinforced powder grade material as per IS:11551 & sheet grade unsaturated polyester resin as per IS:6746 duly mixed with u/v protection & extra clarity in continuous hot cured production translucent pigmented or gelcoated opaque sheet complete as per specification,drawing or direction of Engineer in charge.


Page-76

Item No.


12.11 FRP CHAJJA providing & fixing of factory made Fibreglass Reinforced Plastic (FRP) chajja 4 mm thick of FIBREWAYS in required colour size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece ,having smooth gradual slope curvature for easy drainage of water and duly reinforced by two numbers vertically and one number horizontally 50x2mm thick M.S. plate with 12 mm in built hole for grouting on the existing wall along with the 50 mm flange duly inserted and sealed in the wall complete in one single piece casted monlythically including all necessary fittinga. ?The FRP chajja should be manufactured using unsaturated polyster resin as per IS 6746 duly reinforced with fibre glasss chopped strand mat (CSM)as per IS: 11551 complete with protective Gelcoat U/V coating on top for completen resistance from the extreme of temperature,weather & sunlight.

U ni t

Rat e

Rm

4,795.82

(a) Fixed windowusing uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

sqm

6,272.22

(b) ProVen t fixe window Using uPVC sections of size 37mm x 43mm x 2.2mm thick wall for frame and 37mm x 56mm x 2.2mm thick wall for sash having 1.5mm thick reinforcement for both frame & sash. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

sqm

5,431.37

uPVC Doors & Windows uPVC Windows

12.12 Fixed Windows 12.12.1 Supplying and installing uPV C- Fix ed Win dowsmade out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent. With 5mm clear glass

12.12.2 Supplying and installing uP VC - Sl idin g Wi ndowsmade out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass (a ) 2 Tr ac k Sl idin g Wi ndow wi th Fl ysc reusing en uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen

sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)


Page-77

Item No.


U ni t

Rat e

(i)2-Panelwith5mmclearfloatglass

sqm

8,854.83

(ii)4-Panelwith5mmclearfloatglass

sqm

10,116.09

(b) 2 Tr ack Sl idin g Wi ndow wi th out Fl ysc reusing en uPVC section of size 58mm x 53mm x 2.4mm thick wall for frame, 37mm x 61mm x 2.4mm thick wall for glass sash having 1.5mm thick reinforecement for both frame & sash, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

(i)2-Panelwith5mmclearfloatglass

sqm

8,194.16

(ii)4-Panelwith5mmclearfloatglass

sqm

9,515.49

12.12.3 Supplying and installing uPV C- Cas ement Win dowsmade out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. a) S i n g l e l e af S i d e h u n g W i n dow using uPVC section of size 58mm x 57mm x

sqm

10,716.71

sqm

10,716.71

(c) Do u ble leaf Si de h un g W in dow w it h a Du mm y M u ll ion - Fr ench Wi n(2 dow sqm Panels) using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

10,956.95

2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash. With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) b) Do u bl e l ea f S i de h u n g W i n dow w i t h a f i x ed M u l l i(2 o nPanels) using uPVC profile size of 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash, 58mm x 74mm x 2.4mm thick for mullion. With 5mm clear float glass

(d) S in gl e l ea f Top hu n g Wi n dow using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

sqm

9,815.80

(e) Double le af Top hu ng Wi ndow using uPVC section of size of 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash, 58mm x 74mm x 2.4mm thick wall for mullion. With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

sqm

11,077.07

(f) Pro Vent openable Top hung Win dow using uPVC section of size 37mm x 43mm x 2.2mm thick wall for frame, 37mm x 56mm x 2.2mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

sqm

8,013.98

12.13 uPVC DOORS


Page-78

Item No.


U ni t

Rat e

12.13.1 Supplying and installing uP VC - sl idin g doormade out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.8mm with corners fusion welded, fully reinforced with Galvanized steel 2mm including interlock profile, glazing bead, grooving bead, brush seal, locking arrangement, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. (I ) 2 Tr ack Sl idin g door wi th Fl ysc reusing en uPVC section of size 88mm x 50mm x 2.8mm thick wall for frame, 37mm x 75mm x 2.8mm thick wall for glass sash, 25mm x 49mm x 2.8mm thick wall for flyscreen sash, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (a) 2-Panel

Using i) 5mm clear float glass ii)Using5mmcleartoughenedglass

sqm sqm

11,857.86 10,956.95

(b) 4-Panel

Using i) 5mm clear float glass ii)Using5mmcleartoughenedglass

sqm sqm

12,638.64 12,638.64

(I I) 2 Tr ack Sl idin g door w it h out Fl ys cr ee n using uPVC section of size 58mm x 53mm x 2.8mm thick wall for frame, 37mm x 75mm x 2.8mm thick wall for glass sash, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (a) 2-Panel

Using i) 5mm clear glass ii)Using5mmcleartoughenedglass

sqm sqm

10,956.95 8,794.77

(b) 4-Panel

Using i) 5mm clear glass ii)Using5mmcleartoughenedglass

sqm sqm

10,776.77 11,077.07

r 12.13.2 Supplying and installing uPV C- Cas ement Doomade out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, locking arrangement, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. (a ) Si ng le le af Si de hung Do or using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash, Aluminium threshold at bottom (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Using i) 5mm clear glass


sqm

15,281.32

Page-79

Item No.


ii)Using5mmcleartoughenedglass

U ni t

sqm

Rat e

9,875.86

(b) Double leaf Si de hu ng Do or with a Dummy Mullion - French Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash, 58mm x 61mm x 2.4mm thick wall for dummy mulion, Aluminium threshold at bottom. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Using i) 5mm clear glass

sqm

19,125.20

12.14 Lift and Slide Patio Door

made out of Lead free green 12.14.1 Supplying and installing uP VC - li ft or sl ide pati o door profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.8mm with corners fusion welded, fully reinforced with Galvanized steel 2mm including interlock profile, glazing bead, grooving bead, brush seal, locking arrangement, aluminum sliding track, stainless steel rollers, sealing wedge block, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. uPVC section of size 174mm x 70mm x 2.8mm thick wall for frame, 62mm x 100mm x 2.8mm thick wall for glass sash. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)


sqm

26,933.09

Page-80

CH-13: PAINTING Item No. 13.1

D e s c ri pt i on

U ni t

Rate

WHITE / CHALK WASHING

13.1.1 SURFACE PREPARATION 13.1.1 (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

Sqm

Rs.13.57

b) Extra over item no (a) above for scraping on ceiling and on sloping roof.

Sqm

Rs.1.36

c) Washing and cleaning wall surface with soap, soda and clean water

Sqm

Rs.3.72

d) Extra over item no (c) above for washing and cleaning ceiling and sloping roof.

Sqm

Rs.0.37

(a) White washing with lime on wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust,mortar drops and other foreign matter.

Sqm

Rs.17.56

(b) White washing with lime on old wall surfaces (one coat) to give an even shade including throughly brooming the surface to remove all dirt, dust,mortar drops and other foreign matter.

Sqm

Rs.9.06

(c) Extra over item no. (a) above for every subsequent coat of white washing with lime on wall surfaces.

Sqm

Rs.8.51

(d) Extra over item no. (a) above for white washing with lime on ceiling and on sloping roof.

Sqm

Rs.0.94

e) Extra over item no. (b) above for white washing with lime on ceiling and on sloping roof.

Sqm

Rs.0.70

(a) White washing with chalk on cloth or hessian ceiling (two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter.

Sqm

Rs.12.77

b) Extra over item no. (a) above for every subsequent coat of white washing with chalk washing on cloth or hessian cloth ceiling. 13.2.1 COLOUR WASHIN G / CEMENT WASHIN G / DISTEM PERING

Sqm

Rs.5.76

a) Colour washing with lime on wall surface (two coats) over and including a priming coat of white washing to give an even shade after throughly brooming the

Sqm

Rs.27.93

b) Extra over item no. (a) above for every subsequent coat of colour wash with lime on wall surfaces.

Sqm

Rs.10.53

c) Cement washing with portland cement slurry on wall surface (one coats) to give a smooth bodied opaque finish including throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter.

Sqm

Rs.7.74

13.2.2 a) Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Sqm

Rs.7.64

b) Extra over item no (a) above for removing dry or oil bound distemper on ceiling and in sloping roof.

Sqm

Rs.0.76

13.1.2 WHITE WASHING

13.1.3

CHALK WASHING

surface to remove all dirt, dust, mortar drops and other foreign matter.

13.2.2 DISTEMPERING

Ch13 : Painting Works

Page-81 Item No.

D e s c ri pt i on

U ni t

Rate

c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Sqm

Rs.35.17

d) Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Sqm

Rs.35.17

e) Extra over item no. (c) and (d) above for applying one coat of distemper primer/alkali resistant primer over ceiling and on sloping roof.

Sqm

Rs.1.60

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.

Sqm

Rs.78.37

g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.

Sqm

Rs.51.46

h). Distempering with dry distemper of approved brand and manufacture(one coat)

Sqm

Rs.29.14

Sqm

Rs.29.14

Sqm

Rs.4.93

Sqm

Rs.3.23

Sqm

Rs.1.69

other foreign matter and including preparing surface even and sand papered smooth. (i).Priming coat with distemper primer

Sqm

Rs.34.56

(ii). Top coat

Sqm

Rs.48.68

(i).Priming coat with alkali resistant primer

Sqm

Rs.34.56

(ii). Top coat

Sqm

Rs.48.68

and of required shade on old wall surface to give an even shade,after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. i). Extra over item no (f), (g) and (h) above for distempering every subsequent coat of distempering with dry distemper of approved brand and manufacture. j). Extra over item no. (f) above for distempering with dry distemper on ceiling and or sloping roof. k) Extra over item no. (g) above for distempering with dry distemper on ceiling and or sloping roof. l) Extra over item no. (h) above for distempering with dry distemper on ceiling and or sloping roof. m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and

(n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth.


Page-82 Item No.

D e s c ri pt i on

U ni t

Rate

(o) Distempering (one coat) with oil bound distemper of approved brand and manufacture and of required shade on old wall surface to give an even shade, after throughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth.

Sqm

Rs.27.81

p) Extra over item no (m), (n) and (o) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture.

Sqm

Rs.25.88

q) Extra over item no (m), (n) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.

Sqm

Rs.4.93

r) Extra over item no (o) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.

Sqm

Rs.3.23

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Sqm

Rs.40.66

b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Sqm

Rs.46.75

c) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on old wall surface (one coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose or softened paint.

Sqm

Rs.26.24

d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement aint of a roved brand and manufactured. e) Extra over item no (b) above for finishing with cement paint on celing and sloping roof.

Sqm

Rs.21.24

Sqm

Rs.4.93

f) Extra over item no (c) above for finishing with cement paint on celing and sloping roof.

Sqm

Rs.3.23

(g) Extra over item no (d) above for finishing with cement paint on celing and sloping roof.

Sqm

Rs.1.69

13.3.1 Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Sqm

Rs.60.63

13.3.2 Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Sqm

Rs.52.10

13.3.3 Applying water miscible dry powder based 1.5mm thick Vinyl wall putty of Seacem Paint (I) Pvt. Ltd. based on white cement and reinforced with vinyl resin specially designed self curing use as plaster over sand cement plastering over brick and cement concrete wall, ceilings and other surfaces for both interior and exterior

Sqm

Rs.52.60

13 .2 .3

1 3 .3

CE M EN T P A IN T & P R IM ER

P LA S T E R O F P A R I S & W A L L P U T T Y

surfaces to provide a firm and durable base for subsequent painting.


Page-83 Item No.

D e s c ri pt i on

U ni t

Rate

13.3.4 Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick (ii)Thickness = 1.0mm thick 13.3.5 Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) 13.4

Sqm

Rs.66.60

Sqm Sqm

Rs.50.20 Rs.50.30

Sqm

Rs.71.17

Sqm

Rs.49.82

Sqm

Rs.41.67

Sqm

Rs.29.17

Sqm

Rs.4.95

Sqm

Rs.3.23

WALL PAINTING

13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) 13.4.2 Extra over item no 13.4.1 above for every subsequent coat of wall painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) 13.4.3 Wall painting (one coat) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on old wall surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a). Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) 13.4.4 Extra over item no 13.4.3 above for every subsequent coat of wall painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) 13.4.5 Extra over item no 13.4.1 above for painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) 13.4.6

Extra over item no 13.4.3 above for painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)


Page-84 Item No.

13.4.7

D e s c ri pt i on

Rate

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

13.4.8

U ni t

Sqm

Rs.76.99

Sqm

Rs.53.89

(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) Extra over item no 13.4.9 above for every subsequent coat of wall painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Sqm

Rs.45.26

(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Sqm

Rs.31.68

Sqm

Rs.4.93

Sqm

Rs.3.23

Sqm

Rs.52.66

Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

13.4.9

13.4.10

13.4.11

Wall painting (One coat) with Plastic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on old wall surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

Extra over item no 13.4.7 above for painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

13.4.12

Extra over item no 13.4.9 above for painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

1 3 .5

EX T E R IO R P A IN T S / C O A T I N G S

13.5.1

Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

13.5.2

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Sqm

Rs.85.77

13.5.3

Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade.

Sqm

Rs.42.38

13.5.4

Applying one self-priming coat of Unicem "Shakti" brand of required shade over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

Sqm

Rs.36.81


Page-85 Item No.

D e s c ri pt i on

U ni t

Rate

13.5.5

Finishing wall with two coats of waterproofing cement coatings of Unicem "Shakti" brand of required shade by thinning 1 part of paint with 1 part of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Sqm

Rs.46.78

13.5.6

Extra over item no.13.5.5 above for every subsequent coat of waterproofing cement coatings of Unicem 'Shakti' brand of required shade.

Sqm

Rs.27.86

13.5.7

Extra over item no.13.5.2 and 13.5.5 above for applying / finishing on celing and sloping roof.

Sqm

Rs.6.89

13.6.1 Removing old paint or polish from wood and wood base surfaces with paint remover of approved brand and manufacture and making the surface even.

Sqm

Rs.49.30

13.6.2 Removing old paint or polish from wood and wood base surfaces with caustic soda solution and making the surface even 13.6.3 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.

Sqm

Rs.36.40

(a). With ready mixed paint , Wood primer (pink)

Sqm

Rs.36.90

(b). With ready mixed paint , wood primer (white).

Sqm

Rs.36.90

(c). With ready mixed paint , Alluminium primer

Sqm

Rs.30.16

(a). With ready mixed paint , wood primer (pink)

Rm

Rs.3.95

(b). With ready mixed paint , wood primer (white).

Rm

Rs.3.95

(c). With ready mixed paint , Alluminium primer .

Rm

Rs.3.23

a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Sqm

Rs.61.95

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Sqm

Rs.73.00


Rm

Rs.7.00


Rm

Rs.8.25


Sqm

Rs.41.26


Sqm

Rs.47.78

13.6

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

13.6.4 Applying priming coat over new wood based surfaces up to 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting.

13.6.5

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth.

(ii).Surfaces up to 100mm in width or girth.

13.6.6 Painting one coat (excluding priming coat) on old wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth.

(ii).Surfaces up to 100mm in width or girth. Ch13 : Painting Works

Page-86 Item No.

D e s c ri pt i on

U ni t

Rate


Rm

Rs.4.42


Rm

Rs.5.13


Sqm

Rs.36.90


Sqm

Rs.43.47


Rm

Rs.4.17


Rm

Rs.4.92

a). With hand scraping

Sqm

Rs.42.07

b). With paint remover

Sqm

Rs.44.82

Sqm

Rs.33.96

Rm

Rs.3.80

(i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Sqm

Rs.61.95


Sqm

Rs.73.00


Rm

Rs.7.00


Rm

Rs.8.25

13.6.7 Extra over item no13.6.5and 13.6..6 for every subsequent coat of paint. (i).Surfaces over 100mm in width or girth.


13.7

PAINTING ON STEEL AND OTHER METAL SURFACE

13.7.1 Synthetic enamel paint, aluminium paint / bituminus paint on steel and other metal surfeces. i).Removing old paint from steel and other metal surface and making the surface even.

13.7.2 Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer. 13.7.3 Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer. 13.7.4 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.


13.7.5 Painting one coat (excluding priming coat) on previously painted steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth.


Page-87 Item No.

D e s c ri pt i on

U ni t

Rate


Sqm

Rs.41.26


Sqm

Rs.47.89


Rm

Rs.4.66


Rm

Rs.5.41


Sqm

Rs.36.90


Sqm

Rs.43.11


Rm

Rs.4.17


Rm

Rs.4.92

(a).Surfaces over 100mm in width or girth.

Sqm

Rs.60.44

(b).Surfaces up to 100mm in width or girth.

Rm

Rs.6.83

Sqm

Rs.38.84


13.7.6 Extra over item no.13.7.4 and 13.7.5 for every subsequent coat of paint. (i).Surfaces over 100mm in width or girth.


13.7.7 Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

13.7.8 Painting one coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (a).Surfaces over 100mm in width or girth. (b).Surfaces up to 100mm in width or girth.

Rm

Rs.4.39

13.7.9 Painting three coats (excluding priming coat) on new steel and other metal surface with ready mixed bituminous paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) after applying black anticorrosive paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Sqm

Rs.47.76

13.7.10 Painting one coats (excluding priming coat) on new steel and other metal surface with ready mixed bituminous paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) after applying black anticorrosive paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Sqm

Rs.24.41

13 .8

PA INT ING ON RO OF SU RF AC ES 2

13.8.1 Applying mordent solution of approved brand and manufacture on new C.I sheet for preparation of surfaces for painting @5.00 litre/100 sq. metre of surface and rubbing the solution with brush including thoroughly cleaning the surface of oil, grease, dirt and other foreign matter.

M

Rs.26.51

13.8.2 Painting two coats on new G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over G.C.I sheets to give an even

Sqm

Rs.55.87

shade including cleaning rustcomplete. patches with emery paper, dust ,dirt, grease and other foreignthe matter withthe water


Page-88 Item No.

D e s c ri pt i on

13.8.3 Painting one coats on old G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over G.C.I sheets to give an even shade including the cleaning the rust patches with emery paper, dust ,dirt, grease and other foreign matter with water complete.

U ni t

Sqm

13.8.4 Extra over item no.13.8.3 for every subsequent coat of paint.

Rate

Rs.42.27

Rs.19.12

SPECIAL WATHER PROOF COLOURING 13.9.1

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Sqm

Rs.127.80

13.9.2

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Sqm

Rs.127.58

13.9.3 Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats).

Sqm

Rs.142.93

13.9.4

Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium acrylic smooth exterior finish of Snowcryl XT brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc. including scaffolding complete as directed at all levels (two coats).

Sqm

Rs.129.21

13.9.5

Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Sqm

Rs.101.78

13.9.6

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Sqm

Rs.127.80

13.9.7

Supplying and applying interior/exterior walls/ floors/ roofs one coat of Epoxy Primer of Jenson & Nicholson/ Nerolac brand as priming coat after cleaning and clearing the surfaces as specified and directed and then applying two coats of Epoxy paints of Jenson & Nicholson/ Nerolac brand of required shade on walls/

Sqm

Rs.224.27

floors/ roof surfaces as specified and directed complete including scaffolding at all levels. 13.9.8

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Nerolac Paints Limited of required shade on old/ new wall surface to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats).

Sqm

Rs.127.80

13.10.1

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Antonio

Sqm

Rs.652.52

13.10.2

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Granito naturale

Sqm

Rs.769.21


Page-89 Item No.

D e s c ri pt i on

U ni t

Rate

13.10.3

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Naturaplast

Sqm

Rs.800.27

13.10.4

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Permastone

Sqm

Rs.799.10

13.10.5

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Granula

Sqm

Rs.707.21

13.10.6

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Perlina (Regular)

Sqm

Rs.748.60

13.10.7

Providing and applying Spectrum aggragate textured wall coating in the branded

Sqm

Rs.254.56

name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Resana 13.10.8

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Star Spray

Sqm

Rs.399.56

13.10.9

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Quartz King

Sqm

Rs.204.11

13.10.10 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Spray Coat

Sqm

Rs.637.99

13.10.11 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Random Star

Sqm

Rs.719.14

13.10.12 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Super fine

Sqm

Rs.306.16


Page-90 Item No.

D e s c ri pt i on

U ni t

Rate

13.10.13 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Permasan

Sqm

Rs.716.48

13.10.14 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as

Sqm

Rs.642.14

13.10.15 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Graniplast

Sqm

Rs.713.30

13.10.16 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Classic

Sqm

Rs.212.58

13.10.17 Providing and applying Spectrum aggragate textured wall coating in the branded

Sqm

Rs.593.43

13.10.18 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Rustik ( fine )

Sqm

Rs.593.43

13.10.19 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Rustik (Regular)

Sqm

Rs.787.39

per manufacturers guideline and specification of the product. a)Spectrum Ornaplast

name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Perlina ( fine )


Page-91

CH-14: VARNISHING, POLISHING, OILING Item No.

D es cr i pt i onofw or k s

U ni t

R at e

14.1 VARNISHING 14.1.1 Varnishing two coats (excluding priming coat) on new wood and wood based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even surface including cleaning the surface of all dirt,dust and filling the knots,crack etc with specially made wood putty and sand papering so as to produce a smooth,dry and matt surface. (i)Surfacesover100mminwidthorgirth.

Sqm

Rs.83.47

(ii)Surfacesupto100mminwidthorgirth.

Rm

Rs.7.71

14.1.2 Varnishing one coat (excluding priming coat) on previously varnished wood and wood based surfaces with copal/ spar varnish to give an even surface including cleaning the surface of all dirt, dust and sand papering so as to produce a papering so as to produce a smooth,dry and matt surface.

14.2

(i)Surfacesover100mminwidthorgirth.

Sqm

Rs.41.96

(ii)Surfacesupto100mminwidthorgirth.

Sqm

Rs.4.08

POLISHING

14.2.1 Polishing with french sprit polishing on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust sand papered

Sqm

Rs.115.21

Sqm

Rs.62.39

Sqm

Rs.62.88

Sqm

Rs.35.37

brand and manufacture to give an even surface including cleaning the surface of all dirt,dust and other foreign matter.

Sqm

Rs.20.12

14.2.6 Applying wax-polish on previously polished concrete/ masonry floor with wax polish of approved brand and manufacture to give an even surface including cleaning the surface of all dirt,dust and other foreign matter .

Sqm

Rs.19.69

Sqm

Rs.25.46

Sqm

Rs.15.90

smooth and including a coat of wood filter 14.2.2 Polishing with french sprit polishing on previously polished wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust, sand papered smooth and including a coat of wood filter 14.2.3 Applying wax-polish on new wood and wood based surfaces with bees wax polish in prop. (2 bees wax: 1.5 linseed oil:1 terpentine oil:0.5 varnish by weight to give an even surface including cleaning the surface of all dirt,dust, sand papered smooth . 14.2.4 Applying wax-polish on previously wax polish wood and wood based surfaces with bees wax polish in prop. (2 bees wax:1.5 linseed oil:1 terpentine oil: 0.5 varnish by weight) to give an even surface including cleaning the surface of all dirt,dust, sand papered smooth . 14.2.5 Applying wax-polish on new concrete/masonry floor with wax polish of approved

14.3 OILING 14.3.1 Applying two coats of oil with raw linseed oil on new wood and wood based surface including cleaning the surface of all dirt,dust and sand papered so as to produce a smooth, dry and neat surface. 14.3.2 Applying one coat of oil with raw linseed oil on previously oiled wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust and sand papering so as to produce a smooth, dry and neat surface.

Ch-14 : Vernishing, Polishing, Oiling

Page-92

Item No.


U ni t

R at e

14.3.3 Applying two coats of wood preservative on wood and wood based surfaces including preparing the surface by throughly cleaning oil, grease dirt and other foreign matter, sand papering and knotting. (a) With kiricide oil

Sqm

Rs.24.59

(b) With Creosote oil

Sqm

Rs.25.35

14.3.4 Applying one coat of wood preservative on previously created wood and wood based surfaces, including preparing the surface by throughly cleaning oil, grease dirt and other foreign matter, sand papering and knotting. (a) With kiricide oil

Sqm

Rs.19.43

(b) With Creosote oil

Sqm

Rs.20.04

14.3.5 Painting two coats (excluding priming coat) on new wood and wood based surface with coal tar, new wood and wood based surface with coal tar, black paint to give an even surface including cleaning all dirt, dust and other foreign matter.

14.3.6 Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with coaltar,black paint to give an even surface including cleaning all dirt, dust and other foreign matter. 14.3.7 Applying two coats of wood preservative oil,colourless (Burger Products) on new wood and wood based surfaces, after including preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter, sand papering and knotting. 14.3.8 Applying one coats of wood preservative oil,colourless (Burger Products) on new wood and wood based surfaces, after including perparing wood based surfaces, after including perparing the surface by throughly cleaning oil,grease,dirt and other foreign matter, sand papering and knotting.

Ch-14 : Vernishing, Polishing, Oiling

Sqm

Rs.44.15

Sqm

Rs.24.79

Sqm

Rs.105.17

Sqm

Rs.60.38

Page-93

CH-15: DOOR AND WINDOW FITTINGS Item No. 15.1


U ni t

R at e

ELECTRO COLOURED IRON FITTINGS

15.1.1 Supplying, fitting, fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws including necessary screws etc. complete. a) Sliding door bolts

i) 300mm x 16mm

Each

Rs.169.88

ii) 250mm x 16mm

Each

Rs.152.04

i) 300mm x 10mm

Each

Rs.164.68

ii) 250mm x 10mm

Each

Rs.139.71

iii) 200mm x 10mm

Each

Rs.121.86

iv) 150mm x 10mm

Each

Rs.92.12

v) 100mm x 10mm

Each

Rs.64.78

i) 75mm

Each

Rs.29.35

ii) 100mm

Each

Rs.35.30

iii) 150mm

Each

Rs.41.24

i) 75mm

Each

Rs.32.91

ii) 100mm

Each

Rs.38.86

iii) 150mm

Each

Rs.43.62

i) 75mm

Each

Rs.8.53

ii) 100mm

Each

Rs.10.32

iii) 150mm

Each

Rs.13.29

iv) 250mm

Each

Rs.21.02

v) 300mm

Each

Rs.37.67

i) 90mm / 75mm

Each

Rs.70.85

ii) 115mm

Each

Rs.76.80

iii) 150mm

Each

Rs.100.58

i) 50mm x 40mm x 2.5mm

Pair

Rs.63.47

ii) 75mm x 60mm x 3.15

Pair

Rs.82.51


Pair

Rs.44.45

ii) 75mm x 47mm x 1.60mm

Pair

Rs.58.72

iii) 100mm x 58mm x 1.90mm III) Light type

Pair

Rs.76.56

b) Tower bolts

c) Cast iron stove door handles

d) MS door handles

e) MS gate shutter hook & eye

f) MS wire hasp and staples

g) MS butt hinge I) Heavy type

II) Medium type

Ch-15 : Door and widow Fittings

Page-94

Item No.


U ni t

R at e

i) 50mm x 30mm x 0.90mm

Pair

Rs.36.12


Pair

Rs.44.45

iii) 100mm x 50mm x 1.25mm

Pair

Rs.61.10

i) 75mm ( 100mm x20mm x2.24mm )

Pair

Rs.183.61

ii) 100mm (125mm x 27mm x 2.80mm)

Pair

Rs.232.37

ii) 125mm (125mm x 27mm x 2.80mm)

Pair

Rs.296.61

a) 100mm

Pair

Rs.332.29

b) 125mm

Pair

Rs.367.97

c) 150mm

Pair

Rs.504.76

RM

Rs.206.33

i) 300mm x 20mm x 6mm

Each

Rs.128.09

ii) 250mm x 10mm x 6mm

Each

Rs.107.87

l) MS mortice night latches

Each

Rs.1,064.67

i) 100mm

Each

Rs.740.82

ii) 125mm

Each

Rs.788.40

iii) 150mm

Each

Rs.835.98

i) 300mm x 16mm

Each

Rs.272.17

ii) 250mm x 16mm

Each

Rs.260.27

i) 300mm x 12mm

Each

Rs.140.90

ii) 250mm x 12mm

Each

Rs.121.86

iii) 200mm x 12mm

Each

Rs.104.02

iv) 150mm x 10mm

Each

Rs.88.56

v) 100mm x 10mm

Each

Rs.68.34

i) 75mm

Each

Rs.36.49

ii) 100mm

Each

Rs.38.86

iii) 150mm

Each

Rs.42.43

Each Each

Rs.22.22 Rs.24.59

h) MS pariamentary hinge

i) MS double acting spring hinge

j) MS continuous hinge

35mm x 1.00m k) MS door latches

m) MS rim latches

15.2

ALUMINIUM FITTINGS

15.2.1 Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts

b) Tower bolts

c) Door handles

d) Gate shutter hook & eye

I) 100mm ii) 125mm


Page-95

Item No.


U ni t

R at e

iii) 150mm

Each

Rs.26.97

iv) 250mm

Each

Rs.44.81

v) 300mm

Each

Rs.60.27


Pair

Rs.65.86


Pair

Rs.77.75

iii) 75mm x 65mm x 4mm

Pair

Rs.87.26

iv) 100mm x 63mm x 3.2mm

Pair

Rs.99.15

v) 100mm x 75mm x 4mm

Pair

Rs.107.48

i) 75mm ( 100mm x31mm x6.5mm )

Pair

Rs.161.01

ii) 100mm (50mm x 22.5mm x 6.5mm)

Pair

Rs.195.51

e) Butt hinge

f) Pariamentary hinge

g) Continuous piano hinge

40mm x .8m

RM

h) Mortice night latches

Rs.182.54 Rs. 1,307.99

i) Rim latches

i) 100mm

Each

ii) 125mm

Each

Rs.954.92

iii) 150mm

Each

Rs.1,050.08

j) Fan light pivot

Each

Rs.56.85

k) Fan light catcher

Each

Rs.82.23

l) Hydraulic door closure

Each

Rs.1,077.24

i) 65mm( Godrej With handle(2 lever)

set

Rs.1,076.05

ii) 75mm(Godrej with handle(4 lever)

set

Rs.1,288.96

iii) 100mm(Godrej with handle (6 lever)

set

Rs.1,652.92

iv) Aldrop with In built Lock-6 lever kadi tala(Godrej Make)

set

Rs.1,026.08

Rs.871.66

m) Mortice lock vertical type

v) pin cylinder Mortise Lock Oliver/Matiz/Victoria -Godrej make

Rs. 2,213.14

n) Drawer locks

i) 40mm

Each

Rs.184.49

ii) 50mm

Each

Rs.204.72

iii) 65mm

Each

Rs.246.34

iv) 75mm

Each

Rs.252.29

i) 40mm

Each

Rs.177.36

ii) 50mm

Each

Rs.192.82

iii) 65mm

Each

Rs.210.66

iv) 75mm

Each

Rs.246.34

p) Finger plate

Each

Rs.324.88

q) Kicking plate

Each

Rs.327.79

o) Cupboard locks

r) Curtain rod Ch-15 : Door and widow Fittings

Page-96

Item No.


i) 20mm x 2mm

15.3

U ni t

R at e

RM

Rs.117.91

ii) 25mm x 2mm

RM

Rs.147.65

s) Wardrobe knob

Each

Rs.41.26

t) Door stopper with rubber stopper

Each

Rs.85.81

i) 300mm x 16mm

Each

Rs.824.08

ii) 250mm x 16mm

Each

Rs.764.59

i) 300mm x 10mm

Each

Rs.376.41

ii) 250mm x 10mm

Each

Rs.271.74

iii) 200mm x 10mm

Each

Rs.236.04

iv) 150mm x 10mm

Each

Rs.212.25

v) 100mm x 10mm

Each

Rs.146.84

i) 75mm

Each

Rs.59.08

ii) 100mm

Each

Rs.65.03

iii) 150mm

Each

Rs.82.87

I) 100mm

Each

Rs.44.81

ii) 150mm

Each

Rs.55.51

iii)250mm

Each

Rs.62.65

iv) 300mm

Each

Rs.72.16


Pair

Rs.448.02

iii) 100mm x 50mm x 4mm

Pair

Rs.329.08

iii) 100mm x 40mm x 2.5mm

Pair

Rs.293.40

iv) 75mm x 50mm x 4mm

Pair

Rs.274.37

v) 75mm x 40mm x 2.5mm

Pair

Rs.195.87

vi) 50mm x 40mm x 2mm

Pair

Rs.82.87

i) 75mm ( 75mm x20mm x 3.2mm )

Pair

Rs.472.64

ii) 100mm (100mm x 27mm x 5mm)

Pair

Rs.660.57

ii) 150mm (100mm x 27mm x 5mm)

Pair

Rs.815.19

i) 90mm

Pair

Rs.199.30

ii) 115mm iii) 150mm

Pair Pair

Rs.211.19 Rs.246.88

BRASS FITTINGS

15.3.1 Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). a) Sliding door bolts

b) Tower bolts

c) Door handles

D) Gate shutter hook & eye

e) Butt hinge

f) Pariamentary hinge

g) Hasp and staple


Page-97

Item No.


U ni t

R at e

h) Spring hinge

i) 100mm

Pair

Rs.951.34

ii) 125mm

Pair

Rs.1,040.55

iii) 150mm

Pair

Rs.1,165.44


Each

Rs.369.54


Each

Rs.226.81

iii) 100mm x 20mm x4mm

Each

Rs.161.39


Each

Rs.248.22


Each

Rs.236.33

i) Mortice night latches (Godrej make)

Each

Rs.980.91

ii. Rim latches (Godrej make)

Each

Rs.1,254.65

l) Fan light pivot

Each

Rs.53.70

m) Fan light catcher

Each

Rs.103.65

i) Flush bolts

j) Door latches

k) Night latches

n) Mortice lockl vertical type

i) 65mm

set

Rs.791.76

ii) 75mm

set

Rs.1,362.69

Each

Rs.1,323.44

i) 40mm

Each

Rs.285.07

ii) 50mm

Each

Rs.332.64

iii) 65mm

Each

Rs.386.17

iv) 75mm

Each

Rs.439.69

i) 40mm

Each

Rs.232.07

ii) 50mm

Each

Rs.279.64

iii) 65mm

Each

Rs.333.17

iv) 75mm

Each

Rs.386.69

r) Finger plate

Each

Rs.446.21

s) Kicking plate

Each

Rs.256.44

i) 20mm x 2mm

RM

Rs.239.24

ii) 25mm x 2mm

RM

Rs.310.61

u) Wardrobe knob

Each

Rs.72.18

v) Door stopper with rubber stopper

Each

Rs.176.85

w) Ball catcher

Each

Rs.50.76

x) Magnet catcher

Each

Rs.50.76

y) Peeping plate DOOR CLOSER & FLOOR SPRING

Each

Rs.167.18

o) Mortice cylindrical type(Godrej make)-polished Brass p) Drawer locks

q) Cupboard locks

t) Curtain rod

15.4


Page-98

Item No.


U ni t

R at e

15.4.1 Providing,fitting and fixing Door closerof various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department. A) Godrej

a) Single Speed Door Closer( size166.5x 48mmx 67mm)-Model C071

Each

Rs.1,163.92

b) Double Speed Door Closer( size 140mm x 39mm x 60mm)- Model Number C 752

Each

Rs.1,447.02

c) Heavy Duty Door Closer( size 180 mm x 65mm x 64mm)

Each

Rs.1,938.25

d) Sleek Door Closer( 215mm x 51mm x 45mm)

Each

Rs.1,700.37

e) Concealed Door Closer ( 230mm x 76.5mm x 30.5mm) B) Fire Rated Door Closer-EN rated Godrej Make

Each

Rs.3,990.03

a) Single speed Door Closer _ Model LKYGDC680

Each

Rs.3,014.69

b) Double speed Fire Rated Door Closer Model LKYGDC834 c) Fire rated Track Arm Door Closer Model LKYGDC610

Each Each

Rs.4,304.05 Rs.4,910.65

a) Compact Floor spring B710 ( size 274mm x 97mm x 40mm)

Each

Rs.4,709.90

b) Heavy duty Floor Spring D100 ( size 308mm x 108mm x40.5mm)

Each

Rs.5,604.36

Each

Rs.7,829.80

(A) MAC Drapery rod i) Gold line and silver line

RM

Rs.1,151.17

ii) Starline and pearline

RM

Rs.1,033.42

iii) Club line

RM

Rs.1,745.88

iv) Print line

RM

Rs.1,508.00

v) Wood line

RM

Rs.1,543.68

vi) Silk line

RM

Rs.1,745.88

vii) Nature line

RM

Rs.2,221.66

viii) Studio line

RM

Rs.1,389.06

ix) Soft line

RM

Rs.1,022.70

x) Fine line

RM

Rs.1,056.01

xi) Speer line

RM

Rs.794.34

xii) Sleek line

RM

Rs.413.71

15.4.2 Providing,fitting and fixing F loor Springof various weight & type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department A) Architectural Range

B) Godrej

15.5

a) Fire rated floor spring B 803( size 307mm x 109mm x 40mm)- 80 kg door/ B 804( size 307mm x 109mm x 40mm)-100 kg door (Godrej make) DRAPERY ROD

15.5.1 Supplying, fitting and fixing drapery rods along with all accessories in doors, windows and other openings complete as specified and directed by the departmentb at all levels.


Page-99

Item No.


U ni t

R at e

(B) VISTA Drapery rod

i) Vista sherwood

RM

Rs.1,032.23

ii) Florence III vista

RM

Rs.1,435.44

iii) Flerona (Rotiron)

RM

Rs.1,091.69

iv) Flored colour gold (pulling system)

RM

Rs.1,239.18

v) Flored color color (Pulling system)

RM

Rs.1,239.18

vi) Soffio M-IV

RM

Rs.913.29

vii) Soffio M-II

RM

Rs.675.39

(C) PVC coated Drapery rod

RM

Rs.592.13

(D) Mettalic Drapery rod

RM

Rs.1,151.17

i) Bellini

RM

Rs.2,554.70

ii) Renoir Pyramid

RM

Rs.2,371.53

iii) Renoir Tulip

RM

Rs.2,601.09

iv) Renoir Orchid

RM

Rs.3,515.76

v) Lorenzo

RM

Rs.2,417.91

vi) Monet Oyestar

RM

Rs.2,784.26

vii) Monet Tulip

RM

Rs.3,515.76

i) Angelo

RM

Rs.2,096.76

ii) Salvador

RM

Rs.2,096.76

iii) Van Gough

RM

Rs.1,778.00

iv) Picaso

RM

Rs.1,594.82

(a) Regular i) 100 mm

Sqm

Rs.1,861.25

ii) 89 mm

Sqm

Rs.1,914.78

iii) 75 mm

Sqm

Rs.2,009.94

iv) 50 mm

Sqm

Rs.2,150.29

i) 100 mm

Sqm

Rs.1,914.78

ii) 89 mm

Sqm

Rs.2,043.25

iii) 75 mm

Sqm

Rs.2,151.48

iv) 50 mm

Sqm

Rs.2,340.61

i) 15mm micro blind

Sqm

Rs.1,745.88

ii) 25 mm slim line blind

Sqm

Rs.1,805.35

iii) 25 mm perforated blind

Sqm

Rs.2,090.82

(D) Mettalic Drapery rod (E) Globus Collection -23mm

(F) Globus Collection -19mm

15.6 BLIND 15.6.1 Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds

(b) Blackout

(B) Horizontal blinds


Page-100

Item No.


U ni t

R at e

iv) 25 mm printed blind

Sqm

Rs.2,697.44

v) 25 mm dust guard blind

Sqm

Rs.4,541.06

vi) 25 mm pearl finish blind

Sqm

Rs.5,373.66

vii) 25 mm special effect blind

Sqm

Rs.2,865.14

viii) 25 mm timber blind

Sqm

Rs.5,549.69

i) Square

Sqm

Rs.330.46

ii) Round

Sqm

Rs.372.08

15.6.2 Extra for providing 175 mm x 175 mm size Vis ion panelin door shutters including providing and fixing 4 mm thick clear glass and teak wood beading 12mm x 12mm , all along the glass edges on both sides including necessary screws etc. and painting / polishing of wooden beading complete as directed.


Page-101

CH-16: GLASS FITTINGS Item No.

D es cr i pt i o nofw or k s

U ni t

Rat e

16 GLASS FITTING 16.1 Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)

(1). Area of glass panes not exceeding 0.15m2 (c). 3.00mm thick.

Sqm

Rs.486.11

(a). 3.00mm thick.

Sqm

Rs.447.30

(b). 4.00mm thick.

Sqm

Rs.562.01

(c). 5.00mm thick.

Sqm

Rs.642.09

Sqm

Rs.691.60

(a). 3.00mm thick.

Sqm

Rs.600.17

(b). 3.50mm thick.

Sqm

Rs.676.25

(a). 3.50mm thick.

Sqm

Rs.726.19

(b). 4.00mm thick.

Sqm

Rs.671.34

(c). 5.00mm thick.

Sqm

Rs.811.36

Sqm

Rs.858.64

(i). Area of glass panes not exceeding 0.15m2

Sqm

Rs.428.49

(ii). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.

Sqm

Rs.444.67

(iii). 3.00mm thick.

Sqm

Rs.433.90

(iv). 4.00mm thick.

Sqm

Rs.554.31

(v). 5.00mm thick.

Sqm

Rs.632.84

(i). 3.00mm thick.

Sqm

Rs.433.90

(ii). 4.00mm thick.

Sqm

Rs.554.31

(2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.

(3). Area of glass panes exceeding 0.52m2. (a). 5.00mm thick. 16.2 Providing and fixing plain frosted glass of ordinary glazing quality beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for woodenbead shall be made separately)

(1). Area of glass panes not exceeding 0.15m2

(2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.

(3). Area of glass panes exceeding 0.52m2. (a). 5.00mm thick. 16.3 Providing and fixing pin-headed glass 3mm thick beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)

16.4 Providing and fixing plain with special metal, sachputty and glazing clip in steel window / doors / cleastory windows including necessary cutting to required sized for all floors.

(1). Clear sheet glass panes

(b) Frosted Glass panes.

Ch-16; Glass fittings

Page-102

CHAPTER 17: FENCING & GATES Item no

D e s cr i pt i on

17.1 Spilt jati bamboo Zenana fencing up to 1800 mm high with well matured Bhaluka bamboo post1500 mm to 1800mm apart driven at least 600 mm under ground and three lines of double bamboo kami tied with wire or cane (spilt bamboo woven in 4 nos of bamboo kamies)

U n it

R at e

Sqm

Rs.188.50

a) Single

Sqm

Rs.115.24

b) Double

Sqm

Rs.154.92

17.3 Bhaluka bamboo dressed post 75mm to 100mm dia driven at least 600mm under ground and tied with wire or cane (in zenana fencing)

Each

Rs.85.11

17.4 Bhaluka bamboo dressed post 75mm to 100mm dia driven at least 450mm under ground and tied with wire or cane (in zeora fencing)

Each

Rs.56.74

17.5 Providing barbed wire on the existing barbed wire fencing with seven strands of barbed wire 12 S.W. G.x 2pliesx 4 points at 75mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with existing posts of the fencing, including removing rotten barbed wire as directed, complete with

M

Rs.28.08

17.6 Supplying , fitting and fixing barbed wire fencing with seven strands of barbed wire 12 S.W.G.x 2pliesx 4 points at 75mm apart including supplying fitting and fixing sawn sal wood posts of 100mmx100mm size struts 1800mm long at 1500mm apart driven at least 600mm under ground with providing 100mmx75mm size struts 1800mm long in corner, straining and end post as necessary including coaltaring two coats in posts and struts and supplying necessary nails, staples etc.complete as directed and specified (the distribution of the barbed wire should be placed at equal intervals for the intermediate except bottom and top which is to be placed at 100mm and 230mm clearance respectively).

M

Rs.1,096.24

17.7 Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x 4 points at 75mm apart with angle iron

M

Rs.630.70

17.2 Jati bamboo compound Zeora fencing 1050mm to 1200mm high kamies of sizes 30mmx6mm placed not more than 100mm apart and driven at least 100 mm under groundincluding Bhaluka bamboo post 1500 to 1800mm apart driven at least 450mm under ground and tied with three lines of double longitudinal bamboo kamies and half bamboo on top (Lattice pattern).

strengthening of post and tightening of the old barbed wire and joinining old serviceable pieces on remaining lines as and where necessary and as directed.

intermediate fencing posts not more than 1800mm apart and straining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given below. a) Intermediate post 35mm x35mm x5mm x1800mm long bottom torched and duly slotted. b) Straining post 65mm x 65mm x 6mm x 1820mm long with 2 stays of 35mmx35mmx1520mm long and 3 base plates 200mm x 200mm x 5mm, duly slotted to take eye bolts etc. c) Corner posts 65mm x 65mm x 6mm x1820mm long with 2 stays of 35mm x 35mm x 5mm x 1 670 mm and3 base plates 200mm x 200mm x 5mm,duly slotted to take eye bolts etc. d) Straining or end posts 65mmx 65mm x 6mmx 1820mm long with 1 stays of 35mm x 35mm x 5mmx 1820 mm long with base plates 200mmx 200mm x 5mm, duly slotted to take eye bolts etc.

Ch-17 : Fencing and Gates

Page-103

Item no

D e s cr i pt i on

U n it

R at e

(All the angle iron posts to be embeded 600mm in C.C.pillars of size 300mmx300mmx600mm in prop.1: 3: 6 and one coat of anticorrosive ready mixed painting to all iron works) including excavation of foundation trenches for C.C. blocks and refilling and removal of surplus soil after completion of works. 17.8 Supplying, fitting and fixing goat proof wire fencing 1070mm high with horizontal wire spacing at 130 mm, 130mm, 150mm, 150mm, 180mm and 180mm from bottom onwards and vertical wires at 100mm apart top and bottom wires should be of 8 S.W G. and intermediate and vertical wire should be of 10S.W.G.with angle iron posts specified in item no 17.7 above including supplying, fitting and fixing with necessary straining eye bolts and staples etc. and painting one coat to all iron posts etc. with anti-corrosive black paint etc. complete as directed and specified(intermediate and straining post should be placed not more than 4000mm and not less than 3000 mm apart and all posts embedded in C.C. pillars of size 300mm x 300mm x 600mm in prop 1:3:6).

M

Rs.530.42

17.9 Supplying, fitting and fixing goat proof wire fencing 1200mm high with horizontal wire spacing at 100mm, 100mm, 100mm, 100mm, 100mm, 100mm,150mm, 150mm, 150mm and 150mm from bottom onwards and vertical wires at 130mm apart, first 3 horizontal wires from top barbed wire apart, first 3 horizontal wires from top barbed wire 12 S.W G.x 2 plies x 4 points x 100 mm apart bottom wire 10 S.W.G. fitted with angle iron posts specified in item no.17.7 above including supplying, fitting and fixing with necessary hooks, bolts and staples etc. and painting one coat to all iron posts etc. with anti-corrosive black paint etc. complete as directed and specified(intermediate and straining post should be placed not more than 4000 mm and not less than 3000 mm apart and all posts embedded in C.C. pillars of size 300mm x 300mm x 600mm in prop 1:3:6).

M

Rs.530.42

17.10 Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following.

Sqm

Rs.656.82

a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.. b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed. c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately).


Page-104

Item no

D e s cr i pt i on

U n it

R at e

17.11 Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

Qtl

Rs.7,436.57

17.12 Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts).

Qtl

Rs.6,808.23

17.13 Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete.

M

Rs.446.97

a) With 25mmx50mm (dia) roller

Each

Rs.251.84

b) With 12.50mmx50mm (dia) roller

Each

Rs.216.16

17.14 Providing roller to the gate including welding etc.complete


Page-105

COMPARATIVE STATEMENT CH-18: STEEL AND IRON WORKS Item D es cr i p t i on no 18 .1 RE IN FO RC EM EN T 18.1.1 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position

Un it

R at e

with proper blocks, supports, chairs, spacers etc. complete. ( N o e x t r a me a s u r e me n t f o r l a p , h o o k , c h a i r , a n c h o r e t c . w i l l b e en te rt ai ne d in th e me as ur em en t as th ey ar e in cl ud ed in th e ra te ) (U pt o 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar (ii)Super Ductile (SD)TMTreinforcementbars

Qtl Qtl

Rs.7,158.90 Rs.6,902.86

b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.

Qtl

Rs.6,026.82

c) ISI approved Mild steel reinforcement bar(M.S.Bar)

Qtl

Rs.6,767.66

18.1.2 Ex tr a over it em 18 .1 .1 (a,b ,c ) fo r ea ch su bs eq ue nt fl oo r or pa rt th er eoQtl f

Rs.37.75

above first floor level. 18.2

B E AM S AN D J O I S T S

18.2.1 Structural steel work in sigle sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. a) In beams and joists fitted independently without connecting plates.

Qtl

Rs.6,946.00

b) In flat up to 25mm thickness

Qtl

Rs.6,620.00

c) In M.S. angles, channels, Tees etc.

Qtl

Rs.7,074.00

a) In beams and joists with connecting plates/ angle cleats

Qtl

Rs.6,729.00

b) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc.

Qtl

Rs.7,618.00

c) In trusses and trussed purlins up to 25m span and 15.0m overall height.

Qtl

Rs.7,316.00

a) In beams and joists with connecting plates/ angled cleat.

Qtl

Rs.7,079.00

b) In trusses and trussed purlins up to 25m span and 15.0m overall height.

Qtl

Rs.7,320.00

18.2.2 Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.

18.2.3 Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.

Ch-18 : Steel and Iron Works

Page-106

Item no 18.3 ROOF T RUSS

D es cr i p t i on

Un it

R at e

18.3.1 Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a ) TAT A ma k e C i r c u l a r H o l l o w s e c t i o n - C Hof S Grade YST-310 conforming to I.S. Specification : 1161-1998 b) Using other ISI marked approved circular hollow section

Qtl Qtl

Rs.8,839.00 Rs.8,410.00

18.3.2 Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Us in g TATA mak e RH S/ SH S of Grade 310 conforming to relevant I.S. code 4923 : 1997 b) Using other ISI marked a pprovedbrandtube 18 .4

Qtl Qtl

Rs.9,334.00 Rs.9,055.00

CO LL APSI BL E / RO LL IN G SHU TTERS

18.4.1 Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Sq.m.

Rs.4,245.50

18.4.2 Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.

Sq.m.

Rs.3,069.00

18.5.1 Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint.

Sq.m.

Rs.2,632.90

18.5.2 Providing, fitting and fixing steel windows/ ventilators (fixed) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including applying a coat of red-lead primer.

Sq.m.

Rs.1,554.40

18 .5

WI ND OW S / V EN TIL ATO RS


Page-107

Item D es cr i p t i on no 18.5.3 Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. Openable a) Fixed b)

Un it

Sq.m. Sq.m.

18.5.4 Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing.

Sq.m.

R at e

Rs.3,087.70 Rs.2,119.60 Rs.4,461.90

18.6 ANGLES/ FLATS/ BOLTS AND NUTS 18.6.1 Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles…….

Qtl

Rs.10,344.45

b) M. S. Flats…….

Qtl

Rs.9,604.99

c) M. S. bolts & nuts…….

Qtl

Rs.9,982.23

M

Rs.354.60

(i) Size 90mm x 60mm (Single rebate)

M

Rs.713.20

(ii) Size 105mm x 60mm (Single rebate)

M

Rs.713.20

(iii) Size 125mm x 60mm (Single rebate)

M

Rs.725.20

(iv) Size 125mm x 60mm (Double rebate)

M

Rs.853.30

(v) Size 165mm x 60mm (Double rebate)

M

Rs.942.70

M

Rs.785.60

18.7 DOOR FRAMES 18.7.1 Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). 18.7.2 Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet

(b) 1.60mm thick sheet (i) Size 90mm x 60mm (Single rebate)


Page-108

Item no

D es cr i p t i on

Un it

R at e

(ii) Size 105mm x 60mm (Single rebate)

M

Rs.815.90

(iii) Size 125mm x 60mm (Single rebate)

M

Rs.849.70

(iv) Size 125mm x 60mm (Double rebate)

M

Rs.948.80

(v) Size 165mm x 60mm (Double rebate)

M

Rs.1,009.20

Sq.m.

Rs.5,381.77

18.8 CATTLE TRAP 18.8.1 Supplying fitting and fixing M.S. cattle trap fabricated, welde, mitred and jointed as per relevant IS code with ISMB 250 joist spaced not more than 1800mm apart and ISA 65 x 65 x 6 spaced not more than 200mm apart and fixing the same over RCC member / Brick wall complete as specified and directed.


Page-109

CH-19: PLINTH PROTECTION WORKS Item no

D es c ri pt i on

U n it

Rat e

19.1 Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.

Sqm

Rs.342.80

19.2 Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Sqm

Rs.665.72

Sqm

Rs.710.43

i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Rm

Rs.888.38

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Rm

Rs.1,093.04

i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Rm

Rs.796.21

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Rm

Rs.975.10

19.3 Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete. 19.4 Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

19.5 Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

Ch-19 : Plinth Protection

Page-110

CH-20: LANDSCAPING Item No.

20.1

Unit

Description of works LAWN MAKING BY DIBBLING Supplying and dibbling of selected lawn grass [ Doob grass (Cynodon dactylon), cushion grass (Axonopus affinis)] after preparing the land by ploughing / working to a depth of 40 -45 cm, removing of all unwanted debris ( rubbles, pebbles, plant roots etc.), mixing of organic manure(10kg - 15kg/sq.m), levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of dibbling including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.

(a)ByDoobgrass(Cynodondactylon)

Sqm

(b) By Carpet grass (Axonopus affinis)

20.2

Rs.332.13 Sqm

Rs.335.04

LAWN MAKING BY TURFING Supplying and laying of selected grass turves [ size 60 cm x 30 cm] after preparing the land by removing of all unwanted debrises ( rubbles, pebbles, plant roots etc.), mixing of organic manure, levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of laying of grass including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.

(a)ByBahpotiagrassandDoobgrass(Cynodondactylon):

20.3

Rate

Sqm

(b)BYCARPETGRASS(Axonopusaffinis): Sqm POT PLANTING Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Aeirides (I)Usingearthenpotof30cmdia.

(II)Usingearthenpotof60cmdia. (III)Usingconcretepotof60cmdia. (B) With D endrobium (Hybrid) (I)Usingearthenpotof30cmdia.

(II)Usingearthenpotof60cmdia. (III)Usingconcretepotof60cmdia.

Rs.434.46 Rs.496.28

each

Rs.426.30

each

Rs.455.56

each

Rs.536.98

each

Rs.660.02

each

Rs.686.95

each

Rs.871.46

(C) With Mokara

(I)Usingearthenpotof30cmdia.

each

Rs.950.79

(II)Usingearthenpotof60cmdia.

each

Rs.977.73

(III)Usingconcretepotof60cmdia.

each

Rs.1,162.23

(D) With Vanda (hybrid)

Ch-20 : Landscaping


each

Rs.2,388.12


each each

Rs.2,430.36 Rs.2,614.86

Page-111

Item Description of works No. 20.4 Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cowdung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

Unit

(A) With Fancy leaf caladium/Coleus

(i)Usingearthenpotof30cmdia.

each

Rs.262.98

(ii)Usingearthenpotof60cmdia.

each

Rs.340.85

(iii)Usingconcretepotof60cmdia.

each

Rs.423.49

(B) With Indian rubber plant / Prayer plant


each

Rs.262.98


each

Rs.340.85


each

Rs.423.49

(C ) Wi th Fr ag rant dr acaena / Si lv er net leaf / Ph il oden dr on / De vi l' s back bone /Peperomea/Croton


each

Rs.262.98


each

Rs.340.85


each

Rs.423.49

(D) With Peacock/spider/Umbrella


each

Rs.286.24


each

Rs.364.11


each

Rs.446.75

(E) With Maiden hair fern/Aloe/Boston fern/Swiss cheese plant/Forget me not


each

Rs.297.87


each

Rs.375.74


each

(F) With Marry Christmas begonia / Polypodium / Aluminium plant (I)Usingearthenpotof30cmdia. each

(II)Usingearthenpotof60cmdia. (III)Usingconcretepotof60cmdia. (G) With English Ivy (I)Usingearthenpotof30cmdia.


each each

Rs.458.38

Rs.303.69 Rs.381.55 Rs.464.19

each

Rs.286.24

each

Rs.364.11

each

Rs.446.75

(H) With Iron Cross Begonia


each

Rs.558.16


each

Rs.636.02

(III)Usingconcretepotof60cmdia. (I) With Anthurium Ch-20 : Landscaping

each

Rs.718.66

Rate

Page-112

Item No.

Unit

Description of works (J) With Selloum (K) With Birdnest fern/Good luck plant

20.5

Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cowdung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Bottle palm (I)Usingearthenpotof30cmdia.

each

Rs.244.43


each

Rs.335.03


each

Rs.417.67

(B) With Erica palm (Butterfly palm)/ Kentia palm


each

Rs.271.00


each

Rs.348.86

(III)Usingconcretepotof60cmdia. (C) With Chinese Palm (I)Usingearthenpotof30cmdia.

(II)Usingearthenpotof60cmdia. (III)Usingconcretepotof60cmdia. (D) With Fan Palm /Finger palm (I)Usingearthenpotof30cmdia.

(II)Usingearthenpotof60cmdia. (III)Usingconcretepotof60cmdia. 20.6

Rs.431.50

each

Rs.294.26

each

Rs.372.13

each

Rs.454.77

each

Rs.500.00

each

Rs.577.87

each

Rs.660.51

Supplying and planting of seasonal flower in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (I)Usingearthenpotof30cmdia.

each

Rs.184.38


each

Rs.274.98

(III)Usingconcretepotof60cmdia. 20.7

each

each

Rs.357.62

Supplying and planting of cactus in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, sand, cow-dung, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Peanut Cactus / Rat tail Cactus

Ch-20 : Landscaping


each

Rs.369.74


each

Rs.455.44

Rate

Page-113

Item No.

Unit

Description of works


each

(B) With Prickly pear (I)Usingearthenpotof30cmdia.


20.9

Rs.538.08

each

Rs.393.00

each

Rs.478.70

each

Rs.510.41

(C) With Parodia globular (I)Usingearthenpotof30cmdia.

each

Rs.270.88


each

Rs.513.59

(III)Usingconcretepotof60cmdia. 20.8

Rate

each

BED PLANTING Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed .

Rs.596.23 each

Rs.136.04

Supplying and planting of selected rose plants on the ground (as specimen bush) including the preparation of the pit ( 45 cm x 45 cm x 45 cm ), removing unwanted debrises, filling the pit with manure and fertilizers as per specification and necessary maintenance for a period of 1year from the date of planting complete as specified and directed . (A) With Pompon Rose

each

Rs.476.22

(B)WithHybridtearose/Miniatunerose

each

Rs.464.59

HEDGE PLANTING / EXTERNAL HEDGE 20.10 Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD With (i) Duranta

(ii) With Kamini

metre metre

(iii) WithChinese Bamboo

Rs.352.72

Rs.396.80 metre

(iv) WithThuja Ixora /

metre

Rs.401.45 Rs.494.49

(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD

With (i) Duranta (ii) With Kamini

metre metre

(iii) With Chinese Bamboo (iv) WithThuja Ixora /

Rs.483.35

Rs.596.97 metre metre

Rs.606.27 Rs.792.37

EDGE PLANTING / INTERNAL HEDGE

20.11 Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD With (i) Duranta

Ch-20 : Landscaping

metre

Rs.362.03

Page-114

Item No.

Unit


Rate

(ii) With Coleus

metre

Rs.400.65

(iii)WithBrindavan/Latifolius

metre

Rs.436.34

(iv) With Acalypha wilkesiana (v) With Acer palmatum

metre metre

Rs.517.76 Rs.558.46

(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD

With (i) Duranta

metre

Rs.501.96

(ii) With Coleus

metre

Rs.579.22

(iii)WithBrindavan/Latifolius

metre

Rs.676.06

(iv)WithAcalyphawilkesiana (v) With Acer palmatum

metre

Rs.838.89

metre

Rs.920.31

TREE PLANTING

12

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar

(B) Kanchan Nahar / Arjunu / Sonaru (C) (D)BottleBrush/NilGulmohar/Debadaru/WeepingWillow

each

(G) Christmas tree Kuki /

Rs.299.34

Rs.305.16 each

Rs.310.97

each

Ravenala (E) Paine (F)

each

Rs.340.05

each

Rs.340.05

each each

Rs.362.21 Rs.378.55

Flowering Tree

(A) Gulmohar Ashok /

each

(B) Kanchan

Rs.305.16 each

Rs.328.42

SHRUB PLANTING

20.13 Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A)Radhachura/Krishnachura/Ratkirani/Ixora/Jetuka

each

(B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda (C) Korobi Azalea /

each

each

Rs.373.84

Rs.379.66

(D) Thuja

each

Rs.379.66

(E) Poinsettia / Forget me not

each

Rs.391.29

AQUATIC PLANT

Ch-20 : Landscaping

Rs.368.02

Page-115

Item Description of works No. 20.14 Supplying and planting of aquatic plants ( water Lily and Lotus )after preparation of under water soil including organic manuring, supplying the required quantity of water and maintenance for a period of one year from the date of completion complete as specified and directed.

Unit

Rate

Sqm

Rs.516.78

20.15 Preparation of a carpet bedding by raising the backside of the bed to a height of 45 cm (average) after mixing organic manure, fertilizer including supplying and planting of grass and specimen plants (Brindavan) to engrave the desired letters, necessary maintenance for a period of 6 months from the date of planting complete as directed and specified by the department.

Sqm

Rs.686.22

20.16 Construction of a pergola ( Width = 2.0 m, Height of the side posts = 1.8 m, Height at the apex = 2.8 m) with angle iron of size 50 mm x 50 mm x 5 mm (placing at 2000 mm apart ) embedding the iron posts in P.C.C. base ( not less than 600 mm) covering at the top and sides by chain link fencing, painting one coat of primer and two coats of paint including supplying and planting of flowering climbers as enclosed from both sides ( 3 nos. per metre in one side ) of the pergola to facilitate climbing by pit making (30 cm x 30 cm x 30 cm) filling the pit with the mixture of soil and organic manure and necessary maintenance by trimming etc complete as specified and directed by the department. (P.C.C. and soling to be measured and paid separately)

metre

Rs.5,699.85

20.17 Supplying and placing of orchid house of size 3.00 m x 1.5 m x 2.00 m with tub stand, make of 15 mm dia. G.I. Pipe with M.S. rod, M.S. flat etc. including roof frame, painting two coats, covering the roof with 75 % heat absorbing black nets

each

Rs.23,587.77

each

Rs.38.93

20.19 Half brick circular tree guard internal diametre 1.25 m and height 1.2 m above ground and 0.02 m below ground bottom two coarses laid dry and top three coarses in cement mortar 1:6 and the intermediate coarses being in dry honey comb masonry as per design complete.

each

Rs.2,090.61

20.20 Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums including providing and fixing 2 nos. M.S. sheet rings (50 x 0.50) mm with rivets complete in all respects including painting inside and outside of tree gaurd .

each

Rs.135.44

and three sides with wire net complete as directed and specified. 20.18 Edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m.

Supplying and installation of Field Turf Turket PVC sports surface (vinyl sports floor covering) over fibreglass mat with PVC foam backing including anti bacterial 20.21 coating and protected with dirt resistant treatment for ease of maintenance complete as specified and directed.

Ch-20 : Landscaping

(A) F-25 (filament ht. 25mm)

Sqm

Rs.3,582.50

(B) PGF (filament ht. 32mm)

Sqm

Rs.6,678.00

(C) L-35 (filament ht. 35mm)

Sqm

Rs.4,722.90

(D) FTS (filament ht. 40mm)

Sqm

Rs.4,815.00

(E) FTT (filament ht. 60mm)

Sqm

Rs.7,649.00

(F)FTOS1S(filamentht.65mm)

Sqm

Rs.7,649.00

Page-116

CH-21 : PILING WORKS Item No. 21.1


UNIT

Rate

MANUALLY DRIVEN R.C.C. PILE

21.1.1 Providing cast in-situ manual ly dri ven rei nforced cem ent con crete pilofesusi ng req uir ed grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1 (A) SINGLE UNDER - REAMED PILE I) Concrete grade M20 a) Pile Dia 250 mm with 625 mm bulb diameter i) Upto 5 M

Rm

Rs. 506.40

ii) Above 5M

Rm

Rs. 513.07

i) Upto 5 M

Rm

Rs. 688.34

ii) Above 5M

Rm

Rs. 717.79

i) Upto 10 M

Rm

Rs. 912.21

ii) Above 10 M

Rm

Rs. 944.68

i) Upto 10 M

Rm

Rs. 1,252.06

ii) Above 10 M

Rm

Rs. 1,299.48

i) Upto 10 M

Rm

Rs. 1,613.82

ii) Above 10 M

Rm

Rs. 1,668.05

i) Upto 10 M

Rm

Rs. 2,029.11

ii) Above 10 M

Rm

Rs. 2,087.37

b) Pile dia 300 mm with 750 mm bulb diameter

c) Pile dia 350 mm with 875 mm bulb diameter

d) Pile dia 400 mm with 1000 mm bulb diameter

e) Pile dia 450 mm with 1125 mm bulb diameter

f) Pile Dia 500 mm with 1125 mm bulb diameter

(B) DOUBLE UNDER - REAMED PILE a) Pile dia 300 mm with 750 mm bulb diameter Rm i) Upto 5 M ii) Above 5M

Rs. 807.27 Rm

Rs. 866.99

i) Upto 10 M

Rm

Rs. 1,097.95

ii) Above 10 M

Rm

Rs. 1,121.74

i) Upto 10 M

Rm

Rs. 1,483.69

ii) Above 10 M

Rm

Rs. 1,504.10

i) Upto 10 M

Rm

Rs. 1,940.76

ii) Above 10 M

Rm

Rs. 1,953.80

(b) Pile dia 350 mm with 875 mm bulb diameter

c) Pile dia 400 mm with 1000 mm bulb diameter

d) Pile dia 450 mm with 1125 mm bulb diameter

e) Pile Dia 500 mm with 1125 mm bulb diameter

Ch-21 : Piling Works

Page-117

Item No.

UNIT

Rate

i) Upto 10 M


Rm

Rs. 2,474.23

ii) Above 10 M

Rm

Rs. 2,473.55

i) Upto 10 M

Rm

ii) Above 10 M

Rm

C) UNIFORM PILE a) Pile Dia 250 mm i) Upto 5 M

Rm

Rs. 413.24

ii) Above 5M

Rm

Rs. 442.28

i) Upto 5 M

Rm

Rs. 613.70

ii) Above 5M

Rm

Rs. 636.86

i) Upto 10 M

Rm

Rs. 866.52

ii) Above 10 M

Rm

Rs. 947.35

Rm

Rs. 1,131.90

Rm

Rs. 1,237.30

i) Upto 10 M

Rm

Rs. 1,431.94

ii) Above 10 M

Rm

Rs. 1,566.24

i) Upto 10 M

Rm

Rs. 1,689.59

Above 10 M

Rm

Rs. 1,875.03

i) Pile dia 300 mm with 750 mm bulb diameter

Rm

Rs. 787.92

ii) Pile dia 350 mm with 875 mm bulb diameter

Rm

Rs. 1,038.92

iii) Pile dia 400 mm with 1000 mm bulb diameter

Rm

Rs. 1,362.82

iv) Pile dia 450 mm with 1125 mm bulb diameter

Rm

Rs. 1,728.86

v) Pile dia 500 mm with 1250 mm bulb diameter

Rm

Rs. 2,132.62

vi) Pile dia 550 mm with 1375 mm bulb diameter

Rm

Rs. 2,564.82

vii) Pile dia 600 mm with 1500 mm bulb diameter

Rm

Rs. 2,944.57

i) Pile dia 300 mm with 750 mm bulb diameter

Rm

Rs. 813.25


Rm

Rs. 1,112.88

b) Pile Dia 300 mm

c) Pile Dia 350 mm

d) Pile Dia 400 mm i) Upto 10 M ii) Above 10 M e) Pile Dia 450 mm

f) Pile Dia 500 mm

21.2

MACHINE DRIVEN PILES

s bore21.2.1 Providing cast in -sit u ma ch in e dr iv en re in forced ce ment concre te pioflerequired diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1) (A) SINGLE UNDER - REAMED PILE (I) Concret garade M20

(II) Concrete Grade M25


Page-118

Item No.

UNIT

Rate



Rm

Rs. 1,460.60


Rm

Rs. 1,854.07


Rm

Rs. 2,288.96


Rm

Rs. 2,756.15


Rm

Rs. 3,174.85

(B) DOUBLE UNDER - REAMED PILE (I) Concret garade M20 i) Pile dia 300 mm with 750 mm bulb diameter

Rm

Rs. 813.44


Rm

Rs. 1,124.45


Rm

Rs. 1,489.20


Rm

Rs. 1,907.57


Rm

Rs. 2,375.56


Rm

Rs. 2,881.45


Rm

Rs. 3,336.48


Rm

Rs. 1,204.53

iii) Pile dia 400 mm with 1000 mm bulb diameter iv) Pile dia 450 mm with 1125 mm bulb diameter

Rm Rm

Rs. 1,596.08


Rm

Rs. 2,549.68


Rm

Rs. 3,096.48


Rm

Rs. 3,783.89

i) Pile dia 300 mm

Rm

Rs. 704.28

ii) Pile dia 350 mm

Rm

Rs. 953.04

iii) Pile dia 400 mm

Rm

Rs. 1,236.74

iv) Pile dia 450 mm

Rm

Rs. 1,549.85

v) Pile dia 500 mm

Rm

Rs. 1,890.35

vi) Pile dia 550 mm

Rm

Rs. 2,247.36

vii) Pile dia 600 mm

Rm

Rs. 2,552.83

i) Pile dia 300 mm

Rm

Rs. 754.18

ii) Pile dia 350 mm

Rm

Rs. 1,020.97


Rm

Rs. 1,325.44

iv) Pile dia 450 mm

Rm

Rs. 1,662.13

v) Pile dia 500 mm

Rm

Rs. 2,029.00

vi) Pile dia 550 mm

Rm

Rs. 2,415.09

vii) Pile dia 600 mm

Rm

Rs. 2,752.41


Rs. 2,045.73

C) UNIFORM PILE (I) Concret garade M20


(III) Concrete Grade M30


Page-119

Item No.

21 .3

UNIT

Rate

i) Pile dia 500 mm


Rm

Rs. 2,046.74

ii) Pile dia 550 mm

Rm

Rs. 2,436.63


Rm

Rs. 2,777.99

i) Pile Dia 250 mm

Rm

Rs. 294.45

ii) Pile Dia 300 mm

Rm

Rs. 378.73

iii) Pile Dia 350 mm

Rm

Rs. 439.23

iv) Pile Dia 400 mm

Rm

Rs. 556.28

v) Pile Dia 450 mm

Rm

Rs. 686.52

vi) Pile Dia 500 mm

Rm

Rs. 988.38

i) Pile Dia 250 mm

Rm

Rs. 39.75

ii) Pile Dia 300 mm

Rm

Rs. 58.45


Rm

Rs. 81.22

iv) Pile Dia 400 mm

Rm

Rs. 108.23

v) Pile Dia 450 mm

Rm

Rs. 139.76

vi) Pile Dia 500 mm

Rm

Rs. 175.98

vii) Pile Dia 600 mm

Rm

Rs. 263.25

i) Pile Dia 250 mm

Rm

Rs. 46.19

ii) Pile Dia 300 mm

Rm

Rs. 67.92


Rm

Rs. 94.38

iv) Pile Dia 400 mm

Rm

Rs. 125.77

v) Pile Dia 450 mm

Rm

Rs. 162.41

vi) Pile Dia 500 mm

Rm

Rs. 204.50

vii) Pile Dia 600 mm

Rm

Rs. 305.91

i) Pile Dia 500 mm

Rm

Rs. 208.16

ii) Pile Dia 550 mm

Rm

Rs. 120.08

Pile Dia 600 mm

Rm

Rs. 311.38

(i) 250 mm dia

Rm

Rs. 96.78

(ii) 300 mm dia

Rm

Rs. 124.10

St on e Pil e

21.3.1 Stone Pile Providing sto ne pil esof required diameter and length in ordinary / dense soil etc. using 25 mm dowm graded stone aggregate or river gravel including cost of boring including watering, ramming etc. as required, Cost of T&P complete as directed and specified by the department.

21 .4

MISCEL LANEOUS

21.4.1 Extra f or usin g admix ture & pl asticiser (a) RCC grade M20

(b) RCC grade M25

(c ) RCC grade M30

r level requiring use of drilling 21.4.2 Extra for boring specified diameter pile in high sub-soil wate mud and extra cement


Page-120

Item No.


UNIT

Rate

(ii) 350 mm dia

Rm

Rs. 156.90

(iii) 400 mm dia

Rm

Rs. 184.23

(iv) 450 mm dia

Rm

Rs. 227.95

(v) 500 mm dia

Rm

Rs. 282.61

(vi) 600 mm dia

Rm

Rs. 337.27

a) Pile Dia 250 mm

Rm

Rs. 120.84

b) Pile Dia 300 mm

Rm

Rs. 171.72

c) Pile Dia 350 mm

Rm

Rs. 209.35

d) Pile Dia 400 mm

Rm

Rs. 236.38

e) Pile Dia 450 mm

Rm

Rs. 302.10

f) Pile Dia 500 mm

Rm

Rs. 346.62

g) Pile Dia 550 mm

Rm

Rs. 385.31

h) Pile Dia 600 mm

Rm

Rs. 421.35

21.4.3 Empty boringfor specified diameter piles from ground level to cut-off level.

21 .5

REINFORCEMENT

21.5.1 Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)

(A) TMT bar made of Primary producer (From Primary producer)

Qtl

(B) TMT bar of other ISI marked (From Secondary producer)

Qtl

approved (C) ISI M.S. Rod 21 .6

Qtl

Rs. 7,210.68 Rs. 6,395.53 Rs. 7,074.82

LOAD TEST ON PILES ROUTINE TESTS

21.6.1 Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load) 21.6.2 Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.(Rate for Safe working Load)


Ton

Rs.947.87

Ton

Rs.1,143.05

Page-121

CHAPTER 22 : WATERPROOFING, CONCRETE ADMIXTURES & CHEMICAL TREATMENT,REPAIR,REHABILITATION & RE-STRENGTHENING OF STRUCTURES Item No. 22 22 .1


U ni t

R at e

WAT ERP ROO FIN G, REP AIR & RES TRENG THE NING O F STRU CTU RES SU RF AC E PR EPA RA TI ON

22.1.1 Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed

Sqm

Rs.26.78

22.1.1.1 Extra over Item No. 22.1.1, for removing and chipping of brick bat corba, tar felt or any other existing protective layer over roof slab etc.

Sqm

Rs.24.74

22.1.2 Doing patch work in roof slab/ Raft slab wherever necessary by laying small portions of Polymer modified mortar - Cement sand mortar (in prop 1:4) mixed with 100% acrylic Polymer Master Crete M-81 of Choksey Chemicals/Dr. Sealkit Sealcrete (Asian Chemicals) / Rheomix 115 of BASF@ 4% by weight of cement as specified & directed by the Department complete after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately).

Sqm

Rs.130.27

22.1.3 Doing patch work in roof slab/ Raft slab wherever necessary by laying small portions of two component Polymer Modified Mortar Sika Top 122 as specified &

Sqm

Rs.268.51

22.1.4 Doing patch work in existing roof slab wherever necessary by laying small portions of Prepacked Polymer modified cementitious mortar - Renderoc S2 of Fosroc Chemicals/Emaco S88CT of BASF as specified & directed by the Department complete after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately).

Sqm

Rs.1,343.19

22.1.5 Doing patch work in existing roof slab wherever necessary by laying cement sand mortar (prop.1:4) admixed with mortar modifier cum bonding agent Nitobond SBR of Fosroc Chemicals/Rheomix 141 of BASF/Dr. Sealkit Master Bond Latex (Asian Chemicals) @ 3Ltrs per bag of cement after applying with brush a priming coat of Nitobond SBR/Rheomix 141 of BASF/Dr. Sealkit Master Bond Latex (Asian Chemicals) @ 3.5sq.m. per litre as specified & directed by the Department complete after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately).

Sqm

Rs.692.72

22.1.6 Preparing RCC surfaces in expansion joints by thoroughly cleaning with wire brush etc. followed by power washing to make the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

Rm

Rs.8.40

(i) In 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.116.34

(ii) In 1 : 1.5 : 3 (1cement : 1.5coarse sand : 3aggregate) or M-20 grade.

Cum

Rs.145.41

(iii) In 1 : 1 : 2 (1cement : 1coarse sand : 2aggregate) or M-25 grade.

Cum

Rs.221.82

by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

directed by the Department complete after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately).

22.2

CONCRETE & MORTAR ADMIXTURES

22.2.1 Extra for providing and mixing normal Plastisizer Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals)/ RHEOMAC 707 of BASF @ 0.3% by weight of cement in concreting RCC structures as specified and directed by the Department complete at all levels.

Ch-22 : Waterproofing

Page-122

Item No.


U ni t

R at e

22.2.2 Extra for providing and mixing Integral waterproofing compounds like Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No.1 (Asian Chemicals)/ RHEOMAC 707 of BASF @ 0.2% by weight of cement for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels. A. In concrete of proportion: (i) 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.91.01

(ii) 1 : 1.5 : 3 (1cement : 1.5coarse sand : 3aggregate) or M-20 grade.

Cum

Rs.113.77

(iii) 1 : 1 : 2 (1cement : 1coarse sand : 2aggregate) or M-25 grade.

Cum

Rs.173.49

(i) 1 : 3 (1cement : 3coarse sand)

Cum

Rs.95.88

(ii) 1 : 4 (1cement : 4coarse sand)

Cum

Rs.71.38

(iii) 1 : 5 (1cement : 5coarse sand)

Cum

Rs.61.09

A. In concrete of proportion: (i) In 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.86.56


Cum

Rs.108.11


Cum

Rs.165.70


Cum

Rs.138.67


Cum

Rs.102.63


Cum

Rs.88.33

A In concrete of proportion: (i) 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.75.75


Cum

Rs.94.98


Cum

Rs.145.41


Cum

Rs.121.68


Cum

Rs.90.59


Cum

Rs.77.17

B In Plasters/ mortars of proportion:

22.2.3 Extra for providing and mixing normal Plastisizer Conplast P211/Dr. Sealkit LW Super (Asian Chemicals) @ 80ml per bag of cement in concrete/ mortars as specified and directed by the Department complete at all levels.


22.2.4 Extra for providing and mixing Integral waterproofing liquid admixture & plasticiser Conplast X421 IC of Fosroc Chemicals /Rheomac 707 of BASF/Dr. Sealkit Normal Plast (Asian Chemicals) @ 100ml per bag of cement in concrete for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels.


22.2.5 Extra for providing and mixing normal Plastisizer Plastiment BV 40 of Sika India Ltd. /Dr. Sealkit Superplast WR 40 (Asian Chemicals)/Rheobuild 1100i of BASF@ 0.5%0.8% by weight of cement in concrete for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels.


Page-123

Item No.


U ni t

R at e


Cum

Rs.282.64


Cum

Rs.353.30


Cum

Rs.538.79


Cum

Rs.569.80


Cum

Rs.712.26


Cum

Rs.1,086.17

(i) 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.358.77


Cum

Rs.448.45


Cum

Rs.683.89


Cum

Rs.571.79


Cum

Rs.426.04


Cum

Rs.364.36

(i) 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Cum

Rs.204.52


Cum

Rs.249.82


Cum

Rs.368.72


Cum

Rs.312.11


Cum

Rs.238.49


Cum

Rs.207.35

22.2.6 Extra for providing and mixing Plastisizer Sikament 170 of Sika India Ltd. /Rheobuild 620 of BASF@ 1.0%-1.5% by weight of cement in concrete for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. as specified and directed by the Department complete at all levels.

22.2.7 Extra for providing and mixing waterproofing Plastisizer Plastocrete Plus of Sika India Ltd /Dr. Sealkit LW Super (Asian Chemicals)/ RHEOMAC 730 of BASF @ 200gms per bag of cement in concrete for waterproofing as specified and directed by the Department complete at all levels. A In concrete of proportion:


22.2.8 Extra for fibre reinforcing concrete/ mortars by providing and mixing Recron3S of Reliance Industries Ltd. @ 125gms per bag of cement as specified and directed by the Department complete at all levels. A In concrete of proportion:


22.3

WA TER PR OO FIN G OF CH AJ JAS, RO OF SL AB S, TE RRAC ES , SU NKE N SL AB S, SE PT IC TANK,OH TANK, RAFT SLAB IN BASEMENT, WALLS ETC.

22.3.1 (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.


Sqm

Rs.1,208.50

Page-124

Item No.


(B) Using RHEOMIX 131 OF BASF 22.3.2 Supplying, providing, mixing and laying over waterproofing layers/ coatings with concrete screed of average 30mm thick or as per drawings/ requirements in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 10mm and down well graded aggregates and admixed with a normal plasticizer like Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals)/Rheomac 707 of BASF @ 0.3% by weight of cement and thereafter scoring the top surface of the concrete screed @ 200mm c/c as specified and directed by the Department. 22.3.3 Providing, supplying, mixing, laying 8mm thick cement Plastering in prop.1:6 over R.C.C. surfaces mixed with integral waterproofing compounds like Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No.1 (Asian Chemicals) /Rheomac 707 of BASF@ 0.2% by weight of cement conforming to IS:2465 as specified and directed by the Department complete. 22.3.4 Providing, supplying, mixing and champhering the edges along joint of wall/ parapet wall and raft/ roof slab having champhered dimension of 150mm x 150mm with cement sand mortar (prop.1:4) mixed with Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No. 1 of (Asian Chemicals)/ RHEOMAC 707 of BASF@ 0.2% by weight of cement over a primer coat on the area to be champhered with a combination of 100% acrylic Polymer Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/ RHEOMAC 115 of BASF of Choksey Chemicals and cement in the ratio 1:2 to be applied by brush as specified & directed by the Department complete. 22.3.5 Providing and laying modified bituminous water proofing membrane system in roof, Polymod-AP of choksey Chemicals, 3mm thick APP modified waterproofing membrane by torch on method using LPG torch flame after applying a coat of Bituminous primer "Primer Polymod-SB" @ 0.2kg/sq.m. complete as specified and directed by the Department followed by : Supplying, providing, mixing and laying of concrete screed of average 75mm thick in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 12mm and down well graded aggregates and admixed with a normal plasticizer like Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals) @ 0.3% by weight of cement after making the concrete fibre reinforced for reducing the effect of thermal expansion by mixing concrete with Recron 3S @ 1.25kg per bag of cement and/ as specified and directed by the 22.3.6 (A) Providing and applying over roof slab/ raft slab, polymer modified bituminous

U ni t

R at e

Sqm

Rs.1,291.75

Sqm

Rs.161.98

Sqm

Rs.51.32

Rm

Rs.272.64

Sqm

Rs.882.68

Sqm

Rs.594.54

Sqm

Rs.1,222.24

waterproofing membrane Proofex SM of Fosroc chemicals on an unprimed substrate using specially designed spray application equipment to be applied in a single coat, using wet on wet passes to give a nominal dry film thickness of 2mm followed by applying ProofexGeo Textile having weight of 200gm per sq.m immediately after the application of Proofex SM membrane when the surface is still wet but not tacky and as specified and directed by the Department. (B) Providing and application of Sonosheild HLM 5000 of BASF India Ltd, the Liquid, cold-applied elastomeric Asphalt modified Polyurethane waterproofing membrane system of 1.2mm thick having average elongation of 600% and average tensile strength of 1 MPA. The product shall conform ASTM C 836 & National standard of Canada 37.58 - M86 developed by CGSB.


Page-125

Item No.


22.3.7 Supplying, providing, mixing and laying over waterproofing layers/ coatings with cement mortar screed of average 25mm thick or as per drawings/ requirements in proportion 1:4 (1cement : 4sand) admixed with integral waterproofing admixture Conplast X421IC of Fosroc Chemicals /Rheomac 707 of BASF/Dr. Sealkit Normal Plast of (Asian Chemicals)@ 125ml per bag of cement complete as specified and directed by the Department.

U ni t

Sqm

22.3.8 Providing, supplying, mixing and coving the edges along joint of parapet wall & roof

R at e

Rs.219.00

Rs.292.45

slab/ chajja & exterior wall/ walls & raft slabs etc. with cement sand mortar (prop.1:4) mixed with mortar modifier cum bonding agent Nitobond SBR of Fosroc Chemicals/Rheomix 141 of BASF/Dr. Sealkit Masterbond Latex (Asian Chemicals) @ 2-3Ltrs per bag of cement as specified & directed by the Department complete. 22.3.9 Providing and applying over roof/ raft slab, two coats of waterproofing slurry prepared with cement, fine sand in prop 1:1 admixed with modified acrylic polymer like Cemflex of Sika India Ltd./Dr. Sealkit Sealcrete (Asian Chemicals),/ RHEOMIX 131 OF BASF by brush @ 0.25% of cement-sand mixture (by weight) after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete. 22.3.10 Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian

Sqm

Rs.218.45

Sqm

Rs.69.51

22.3.11 Supplying, providing, mixing and laying of concrete screed of average 20mm thick or as per drawings/ requirements in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 10mm and down well graded aggregates and admixed with a waterproofing plasticizer like Plastocrete Plus of Sika India Ltd./Dr. Sealkit LW Super (Asian Chemicals) /Rheomac 730 of BASF@ 0.2% by weight of cement and thereafter scoring the top surface of the concrete screed @ 200mm c/c as specified and directed by the Department. 22.3.12 15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Sqm

Rs.106.23

Sqm

Rs.103.35

22.3.13 Providing, supplying, mixing and champhering the edges along joint of parapet wall & roof slab/ chajja & exterior wall/ walls & raft slabs etc. having champhered dimension of 150mm x 150mm with cement sand mortar (prop.1:4) mixed with Plastocrete Plus of Sika India Ltd./Dr. Sealkit LW Super (Asian Chemicals) /Rheomac 707 of BASF@ 0.2% by weight of cement over a primer coat on the area to be champhered with a combination of modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Rheomix 141 of BASF and cement in the ratio 1:8 to be applied by brush as specified & directed by the Department complete.

Sqm

Rs.158.18

Chemicals)/ RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.


Page-126

Item No.


U ni t

R at e

22.3.14 Providing and laying Polymeric waterproofing membrane sheets Hyperplas Standard of IWL India Ltd. @3kg/sq.m. having 90micron HMHDPE film as centre core with polymeric mix of softening point 118oC and penetration of 25-40 covered on both side and laminated with 20micron HMHDPE, layed over first coat of water based emulsion primer @ 100gms/sq.m. and using hot blown bitumen 90/15 or 85/25 @ 1.2kg/sq.m. followed by repeatation of the bitumen coat and then final coat of bituminous aluminium @ 100gms/sq.m. complete as specified and directed by the Department followed by :

Sqm

Rs.510.98

22.3.15 Providing and applying of one coat of Techoxy of Choksey Chemicals as Primer coat on RCC roof surface followed by 2 (two) coats of Tar-O-Thane with necessary tools inclusive of labour charges in RCC buildings at all levels.

Sqm

Rs.437.38

22.3.16 Providing and applying two coats of coal tar epoxy at an interval of 12 - hours each including all necessary tools and application in R.C.C. buildings at all levels.

Sqm

Rs.148.24

Sqm

Rs.306.50

22.4.2 Applying one coat of epoxy coating Techoxy of Choksey Chemicals followed by two coats of Polyurethane waterproof coating Techcoat 61P at an interval of 12hours each for waterproofing of external walls, roofs, terraces, chajjas, etc. as specified & directed by the Department complete.

Sqm

Rs.476.72

22.4.3 Applying 2 coats of 1mm thick acrylic polymer modified cementitious waterproofing coating Brushbond of Fosroc Chemicals/Dr. Sealkit Flexbond AP 121 C (Asian Chemicals)/ MASTERSEAL 550 of BASF for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.

Sqm

Rs.326.41

22.4.4 Applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals /Dr. Sealkit Flexbond AP 122 C (Asian Chemicals) / MASTERSEAL 550EL of BASF for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface

Sqm

Rs.375.97

22.4.5 Applying two coats of aliphatic acrylate based exterior coating Dekguard Std of Fosroc Chemicals/Masterseal 300H of BASF over one coat of Silane siloxine based Dekguard Std Primer/Masterseal 380 of BASF Primer after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Sqm

Rs.245.85

22.4.6 Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Sqm

Rs.390.64

22.4 WATER PROOF COATINGS: 22.4.1 Applying a two coats of Futura Sealer Coat of Choksey Chemicals over concrete surface/ external walls after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) followed by applying over sealer coat two coats of Futura-5 at a spread rate of 45sq.ft/litre after proper thinning with 10-20% of water complete as specified & directed by the Department.

preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.


Page-127

Item No.


U ni t

R at e

22.4.7 Providing and applying of waterproofing coating like Inertol Proxitar of Sika India Ltd. by brush for waterproofing of septic tanks, sewage treatment plants etc. after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Sqm

Rs.197.66

22.4.8 Applying over exterior walls/ masonry walls etc. two coats of Silaoxane silane based water repellant like Sikagard 703W/Masterseal 380 of BASF @ 250ml per sq.m. wet

Sqm

Rs.153.92

Sqm

Rs.327.35

22.5.2.1 Grout slurry of cement, water and grout admixture Cebex 100 of Fosroc Chemicals /Flowcable 50 of BASF/Dr. Sealkit NSPG (Asian Chemicals) @ 225gms per bag of cement

Sqm

Rs.361.54

22.5.2.2 Grout of two part low viscous epoxy grout Conbextra EP10 of Fosroc Chemicals/Concresive 1315 of BASF

Sqm

Rs.351.94

22.5.3 Providing Grouting by drilling holes @ 1M c/c upto half of the slab/ wall depth in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 18 to

Sqm

Rs.345.05

Rm

Rs.218.03

on wet after properly diluting with water as specified & directed by the Department complete. 22.5

GROUTING IN R.C.C. WALLS, SLABS & RAFT SLABS:

22.5.1 Providing Grouting in R.C.C. walls by drilling holes @ 1M c/c upto half of the wall depth in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 18 to 20mm dia. for injecting a grout slurry of cement, water and expanding grout admixture Master grout CPG1 of Choksey Chemicals /Dr. Sealkit NSPG (Asian Chemicals)/ FLOWCABLE 50 OF BASF @ 0.5% by weight of cement till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 2 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels. 22.5.2 Providing Grouting in R.C.C. walls & slabs by drilling holes @ 300mm c/c upto half of the wall depth in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 20mm dia. for injecting a grout/ grout slurry till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 2 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels.

20mm dia. for injecting a grout slurry of cement admixed with expanding grout admixture Intraplast EP of Sika India Ltd./Dr. Sealkit NSPG (Asian Chemicals) / FLOWCABLE 50 OF BASF@ 1.0% by weight of cement and water resistant bonding agent Sika Latex, till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 3 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels. 22.6 TREATMENT OF CONSTRUCTION JOINTS 22.6.1 Providing treatment of constructional joints in R.C.C. walls and slabs by supplying, mixing and applying a 2-component epoxy resin based bonding agent for old to new concrete like Master Bond - EP/ Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals) (with an open time of 6 hours at 30 deg Celsius) as per detailed drawings or as specified and directed by the Department complete at all levels. (i) Slab/ Wall thickness upto 200mm


Page-128

Item No.


(ii) Slab/ Wall thickness greater than 200mm 22.6.2 Providing treatment of constructional joints in R.C.C. walls and slabs by supplying, mixing and applying a epoxy resin based bonding agent for old to new concrete like Nitobond - EP /Dr. Sealkit Bond OTN (Asian Chemicals)/ CONCRESIVE 1414 as per detailed drawings or as specified and directed by the Department complete at all levels.

U ni t

R at e

Sqm

Rs.1,501.63

Rm

Rs.86.06

Sqm

Rs.833.30

(i) Slab/ Wall thickness upto 200mm

Rm

Rs.25.10

(ii) Slab/ Wall thickness greater than 200mm

Sqm

Rs.250.82

(i) Slab/ Wall thickness upto 200mm (ii) Slab/ Wall thickness greater than 200mm 22.6.3 Providing treatment of constructional joints in R.C.C. walls and slabs by supplying, mixing and applying a single component modified styrene butadiene emulsion bonding agent for old to new concrete like Nitobond - SBR /Rheomix 141 of BASF/Dr. Sealkit MasterBond Latex (Asian Chemicals) as per detailed drawings or as specified and directed by the Department complete at all levels.

22.6.4 Providing treatment of constructional joints in R.C.C. walls and slabs by spraying surface retarder like Rugasol 2 liquid on old concrete surface followed by cleaning with water jets to obtain exposed aggregates prior to laying of new concrete and applying a 2-component epoxy resin based bonding agent for old to new concrete like Sikadur 32LP /Dr. Sealkit Bond OTN (Asian Chemicals) (with an open time of 6 hours at 30 deg Celsius) as specified and directed by the Department complete at all levels.

22.7

(i) Slab/ Wall thickness upto 200mm

Rm

Rs.59.59

(ii) Slab/ Wall thickness greater than 200mm

Sqm

Rs.589.16

Rm

Rs.194.81

(b) Providing and applying two coat of Techseal RDL 942 Primer in both surface of the expansion joint followed by applying Tech seal 940 Polysulphide sealant on vertical joint surface after proper fixing of the necessary backup materials as specified and directed by the Department complete.

Rm

Rs.1,047.52

(C) Providing and applying MASTERFLEX 700i of BASF India Ltd, two-component, high performance polysulfide formulation having weathering resistance to ultraviolet rays. The product shall exhibit shore A hardness of 25 and have movement accommodation factor of 25%. The sealant must comply with the performance specifications as laid in BS:4254 and ASTM C 920. All the joints must be primed using compatible primer for the substrate from the MASTERFLEX PRIMER range. Sealant application shall be carried out, strictly in accordance with

Rm

Rs.1,172.62

TREATMENT OF EXPANSION JOINTS

22.7.1 Providing treatment of expansion joints by the following process as specified and directed by the department. (a) Preparation of groove by nosing the groove in required sizes with Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals) /Rheomix 115 of BASF@ 15% by weight of cement over a bonding coat of Master Crete M81/Rheomix 131 of BASF mixed with cement in the ratio 1:2 as specified & directed by the Department complete after proper surface preparation including cleaning/ chipping removing all sorts of loose particles and foreign materials and cleaning surface thoroughly (surface preparation including thorough cleaning of surface to be measured and paid separately).

Manufacturer’s recommendations.


Page-129

Item No.


U ni t

R at e

(d) (Upto 40 mm: ) Providing and applying two coat of Masterflex Primer in both surface of the expansion joint followed by applying of one component Polyurathene based joint sealant MASTERFLEX 472/474 of BASF India Ltd, which is having specific gravity of 1.30gm/cm³, elongation at break will be > 600% and recoverability will be > 80% joint surface after proper fixing of the necessary backup materials as specified and directed by the Department complete.

Rm

Rs.1,126.16

22.7.2 Providing treatment of expansion joints by the following process as specified and directed by the department. (a) Preparation of groove of required sizes by nosing the groove with cement sand mortar (prop.1:4) mixed with mortar modifier cum bonding agent Nitobond SBR of Fosroc Chemicals /Rheomix 141 of BASF/Dr. Sealkit Master Bond Latex (Asian Chemicals) @ 2-3Ltrs per bag of cement as specified & directed by the Department complete after proper surface preparation including cleaning/ chipping removing all sorts of loose particles and foreign materials and cleaning surface thoroughly (surface preparation including thorough cleaning of surface to be measured and paid separately). (b) Providing and applying two coat of Primer 4 in both surface of the expansion joint followed by applying polysulphide sealant Thioflex 600 on vertical joint surface after proper fixing of the necessary backup materials as specified and directed by the Department complete.

Rm

Rs.204.99

Rm

Rs.1,119.56

22.7.3 Providing treatment of expansion joints by the following process as specified and

Rm

Rs.142.16

Rm

Rs.560.24

Sqm

Rs.39.76

Sqm

Rs.52.88

Sqm

Rs.94.87

directed by the department. (a) Preparation of groove by nosing the groove in required sizes with Cement sand mortar (in prop 1:4) mixed with Sika Latex of Sika India Ltd. /Dr. Sealkit Master Bond Latex (Asian Chemicals)@ 4% by weight of cement as specified & directed by the Department complete after proper surface preparation including cleaning/ chipping removing all sorts of loose particles and foreign materials and cleaning surface thoroughly (surface preparation including thorough cleaning of surface to be measured and paid separately). (b) Providing and applying two coat of Sika Primer P in both surface of the expansion joint followed by applying Sikaflex Construction Polyurethane based sealant on vertical joint surface after proper fixing of the necessary backup materials as specified and directed by the Department complete. 22.8

CURING COMPOUNDS:

22.8.1 Supplying and applying of Mastercure WB1 / WB2 of Choksey Chemicals (india) Ltd. /Dr. Sealkit Cure CC 102/ CC101 (Asian Chemicals) /MASTERKURE 106i OF BASF on the newly placed concrete as soon as possible after the concrete is free from visible surface water by spray method as specified and directed by the department. 22.8.2 Supplying and applying of Concure WB of Fosroc (india) Ltd./Masterkure 107i of BASF on the newly placed concrete as soon as possible after the concrete is free from visible surface water as specified and directed by the department. 22.9

METALLIC/ NON-METALLIC/ EPOXY BASED FLOOR HARDNER/ TOPPINGS

22.9.1 Extra for Providing and applying Lithium silicate based concrete floor hardner Nitoflor LH of Fosroc (india) Ltd. using high volume sprayer or hand applying using lambs wool roller as specified and directed by the department.


Page-130

Item No.


U ni t

R at e

22.9.2 Applying a floating coat of concrete floor hardner Nitoflor Hardtop or Nitoflor Hardtop standard of Fosroc (india) Ltd. over freshly prepared concrete floors followed by sprinkling of Nitoflor Hardtop or Nitoflor Hardtop standard and finishing surface using power trowel as specified and directed by the department (Concrete floor & base courses to be measured and paid separately). (a) Heavy duty (b) Medium duty (c) Light duty 22.9.3 Extra for Providing Non-metallic, ready to use concrete floor hardner, Techfloor HT 200 of Choksey India Ltd. as specified and directed by the department.

Sqm Sqm Sqm

Rs.261.60 Rs.211.65 Rs.161.70

(a) Heavy duty

Sqm

Rs.311.72

(b) Medium duty

Sqm

Rs.247.45

(c) Light duty

Sqm

Rs.183.18

(a) Heavy duty

Sqm

Rs.494.42

(b) Medium duty

Sqm

Rs.384.03

(c) Light duty

Sqm

Rs.273.64

(a) Heavy duty

Sqm

Rs.603.84

(b) Medium duty

Sqm

Rs.453.57

(c) Light duty

Sqm

Rs.303.30

Sqm Sqm Sqm Sqm

Rs.558.68 Rs.416.32 Rs.273.96 Rs.743.86

22.9.6 Extra for Providing and applying 1.5mm to 3mm self smoothing epoxy floor topping Nitoflor SL2000 of Fosroc (india) Ltd./ MASTERTOP 1230 PLUS of BASF using serrated trowel and rolled with a spiked nylon roller after proper surface preparation and application of a priming coat of Nitoprime 25(M) as specified and directed by the department (surface preparation to be measured and paid separately).

Sqm

Rs.1,219.89

22.9.7 Extra for Providing and applying low build polysulphide-epoxy floor coatings, Techfloor LBC-140 of Choksey (india) Ltd. using brush or lambs wool roller after proper surface preparation and applying techfloor primer coat complete as specified and directed by the department (surface preparation to be measured and

Sqm

Rs.442.62

22.9.3.1 Cement Grey Shade

22.9.3.2 Dark Shade

22.9.3.3 Light Shade

22.9.4 Extra for Providing Non-metallic, ready to use concrete floor hardner, Chapdur of Sika India Ltd./ MASTERTOP 100 of BASF as specified and directed by the department. (a) Heavy duty (b) Medium duty (c) Light duty 22.9.5 Extra for Providing and applying 1mm self smoothing epoxy floor topping Nitoflor SL1000 of Fosroc MASTERTOP 1210 PLUS OF BASF using 1mm serrated trowel and rolled(india) with aLtd./ spiked nylon roller after proper surface preparation and application of a priming coat of Nitoprime 25(M) as specified and directed by the department (surface preparation to be measured and paid separately).

paid separately).


Page-131

Item No.


U ni t

R at e

22.9.8 Extra for Providing and applying high build polysulphide-epoxy floor coatings, Techfloor HBC-150 of Choksey (india) Ltd. using medium pile roller or a squeegee after proper surface preparation complete as specified and directed by the department (surface preparation to be measured and paid separately).

Sqm

Rs.1,189.89

22.9.9 Extra for Providing and applying self leveling polysulphide-epoxy floor topping Techfloor SL-2 of Choksey (india) Ltd. /Dr. Sealkit EPU Floor Self L (Asian Chemicals) using steel trowel and rolled after proper surface preparation as specified and

Sqm

Rs.1,295.60

Sqm

Rs.2,024.16

Sqm

Rs.88.13

Rm

Rs.110.87

directed by the department (surface preparation to be measured and paid separately). 22.9.10 Providing and applying normal setting, self levelling epoxy modified cementitious floor topping Sikafloor 81 EpoCem of Sika (india) Ltd. using trowel followed by applying self smoothing epoxy floor coating Sikafloor 261(S) of Sika (india) Ltd. /Dr. Sealkit EPU Floor Self L (Asian Chemicals) / MASTERTOP 542 ECC of BASFusing serrated trowel and rolled with a spiked nylon roller after proper surface preparation and application of a priming coat of Sikafloor 80 Primer as specified and directed by the department (surface preparation to be measured and paid 22.1 REPAIR AND REHABILITATION OF STRUCTURES: 22.10.1 Repairing of spalled concrete in columns by the following processes as specified and directed b the de artment com lete at all levels: A. Chipping of deteriorated concrete and removal of all loose & friable materials and fully exposing rusted reinforcement followed by proper cleaning and removing of rusts and other foreign materials using sand blasting/ emery cloths/ wire brush etc. B. Corroded reinforcement to be replaced by cutting and welding new reinforcement of minimum 25mm dia. and overlapping on both side as specified and directed.(reinforcement bar to be measured and paid separately). C. Applying two coats of cement based polymer modified anti-corrosive protective coating over exposed reinforcement including proper curing for minimum 24 hours.

Rs.405.73

D. Applying Epoxy based bonding agent Master Bond EP of Choksey /Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals) after totally saturating the cleaned concrete surface with clean water for proper bonding of old and new concrete.

Sqm

Rs.716.02

E. Concreting the column with 1:1.5:3 (1cement : 1.5coarse sand : 3aggregate) or M20 grade concrete admixed with a normal plasticizer like Master Plast PL-1/Dr. Sealkit Normal Plast (Asian Chemicals) @ 0.2%-0.5% by weight of cement after making the concrete fibre reinforced for reducing the effect of thermal expansion by mixing concrete with Recron 3S @ 1.25kg per bag of cement followed by proper curing for minimum 28days (Formwork to be measured and paid separately).

Cum

Rs.7,153.94

F. Plastering with high rich polymer modified mortar 10mm thick with cement sand mortar in prop. 1:4 mixed with 100% acrylic polymer Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) / RHEOMIX 131 of BASF @ 15% by weight of cement followed by proper curing as specified and directed by the Department complete. 22.10.2 Repairing of spalled concrete in slabs/ chajjas etc. by the following processes as specified and directed by the department complete at all levels:

Sqm

Rs.204.48

A. Chipping of deteriorated concrete and removal of all loose & friable materials and fully exposing rusted reinforcement followed by proper cleaning and removing of rusts and other foreign materials using sand blasting/ emery cloths/ wire brush etc.

Sqm

Rs.88.13


Page-132

Item No.


U ni t

B. Applying two coats of cement based polymer modified anti-corrosive protective coating Thoro Stucturite Primer of BASF over exposed reinforcement including proper curing for minimum 24 hours.

R at e

Rs.405.73

C. Applying Epoxy based bonding agent Master Bond EP of Choksey /Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals)/Rheomix 141 of BASF after totally saturating the cleaned concrete surface with clean water for proper bonding of old and new concrete.

Sqm

Rs.716.02

D. Concreting the slab/ chajja etc. with concrete admixed with a normal plasticizer like Master Plast PL-1 /Dr. Sealkit Normal Plast (Asian Chemicals) @ 0.3% by weight of cement after making the concrete fibre reinforced for reducing the effect of thermal expansion by mixing concrete with Recron 3S @ 1.25kg per bag of cement followed by proper curing (Formwork & concrete to be measured and paid separately).

Cum

Rs.1,978.70

E. Applying two coats of 2mm thick slurry of 100% pure acrylic polymer like Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) mixed with ordinary portland cement in prop. 1:2.

Sqm

Rs.373.54

F. Plastering with 20mm thick cement sand mortar in prop.1:4 mixed with integral waterproofing compounds like Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No.1 (Asian Chemicals) @ 0.2% by weight of cement conforming to IS:2465 as specified and directed by the Department complete.

Sqm

Rs.370.88


Sqm

Rs.100.51

B. Corroded reinforcement to be replaced by cutting and welding new reinforcement of minimum 25mm dia. and overlapping on both side as specified and directed.(reinforcement bar to be measured and paid separately).

Rm

Rs.110.87

C. Applying two coats of single component epoxy zinc primer Nito Primer Zinc Rich 90 of Fosroc chemicals with brush over cleaned reinforcement.

Sqm

Rs.147.56

D. Providing and fixing shear connectors of 8mm dia. by drilling 14mm dia. holes on the concrete surface to a depth of 75mm using a rotary cum hammering drilling

Each

Rs.145.75

22.10.3 Repairing of spalled concrete in columns by the following processes as specified and directed by the department complete at all levels:

machine as per specification and thoroughly cleaning the hole using compressed air and water jet and anchoring with polyester resin anchor grout Lokfix P of Fosroc chemicals./ Masterflow 935 of BASF E. Providing and fixing sacrificial Zinc anode, Galvashield XP of Fosroc chemicals with reinforcement bars @ 1 unit per 0.5m run of reinforcement, tightened using a suitable wire-twisting tool restricting free movement and ensuring good electrical continuity.

Rm

Rs.1,772.38

F. Supplying, mixing and applying a epoxy resin based bonding agent like Nitobond EP/ B CONCRESIVE 1414 of BASF for proper bond of old to new concrete .

Sqm

Rs.813.05

G.(i) Applying structural grade prepacked polymer modified cementitious mortar Renderoc S2/Emaco S88T of BASF for application thickness upto 20mm overhead/ 30mm verticals, after proper mixing with clean water followed by proper curing for minimum 28days (Formwork to be measured and paid separately).

Cum

Rs.81,852.61


Page-133

Item No.


U ni t

R at e

G (ii). Applying structural grade prepacked polymer modified cementitious mortar Renderoc HB2/Emaco S48CT of BASF for application thickness upto 50mm overhead/ 80mm verticals, after proper mixing with clean water followed by proper curing for minimum 28days (Formwork to be measured and paid separately).

Cum

Rs.140,144.25

G.(iii) Applying and placing cementitious micro-concrete Renderoc RG/Emaco S46T of BASF after proper mixing with clean water after erection of formwork followed

Cum

Rs.69,317.07


Sqm

Rs.100.51

B.(i) Applying two coats of single component epoxy zinc primer Nito Primer Zinc Rich 90 of Fosroc chemicals with brush over cleaned reinforcement.

Sqm

Rs.147.56

B.(ii) Applying two coats of single component epoxy zinc primer Concresive ZRI of BASF India Ltd, a two component, epoxy zinc rich. It shall be formulated to meet the requirement of BS 4652 Type 2. The primer shall be an active type having zinc content of greater then 90% in dry film state which is capable of negating the generation of incipient anodes in the areas surrounding the repairs. The product shall have mix density not less than 2.25 kg/litre. It shall be fully compatible with EMACO Range of repair mortars. with brush over cleaned reinforcement.

Sqm

Rs.266.62

C. Providing and fixing sacrificial Zinc anode, Galvashield XP of Fosroc chemicals with reinforcement bars @ 1 unit per Sqm of reinforcement, tightened using a suitable wire-twisting tool restricting free movement and ensuring good electrical continuity.

Sqm

Rs.895.02

D. Supplying, mixing and applying a epoxy resin based bonding agent like Nitobond EP/ CONCRESIVE 1414 of BASF for proper bond of old to new concrete .

Sqm

Rs.813.05

E. (i) Applying cement sand mortar (prop.1:4) admixed with mortar modifier cum bonding agent Nitobond SBR of Fosroc Chemicals/Rheomix 141 of BASF @ 5Ltrs per bag of cement as specified.

Cum

Rs.492.33

E.(ii) Applying and placing cementitious micro-concrete Renderoc RG/Emaco S46T of BASF after proper mixing with clean water after erection of formwork followed by proper curing for minimum 28days (Formwork to be measured and paid separately).

Cum

Rs.69,317.07

E.(iii). Concreting the slab/ chajja etc. with concrete 1:1.5:3 (1cement : 1.5coarse sand : 3aggregate) or M-20 grade admixed with Conplast P211 of fosroc chemicals @ 150ml per bag of cement followed by proper curing (Formwork & concrete to be measured and paid separately).

Cum

Rs.5,598.90

by proper curing for minimum 28days (Formwork to be measured and paid separately). 22.10.4 Repairing of spalled concrete in slabs/ chajjas etc. by the following processes as specified and directed by the department complete at all levels:

20.10.5 Repairing of spalled concrete in columns by the following processes as specified and directed by the department complete at all levels:


Page-134

Item No.


U ni t

R at e


Sqm

Rs.88.13

B. Corroded reinforcement to be replaced by cutting and welding new reinforcement of minimum 25mm dia. and overlapping on both side as specified and directed.(reinforcement bar to be measured and paid separately).

Rm

Rs.123.25

C.(i) Applying two coats of cement based polymer modified anti-corrosive protective coating Sika Top Armatec 108 of Sika (India) Ltd. over exposed reinforcement including proper curing for minimum 24 hours.

Sqm

Rs.61.00

C.(ii) . Applying two coats of cement based polymer modified anti-corrosive protective coating Sika Topseal of Sika (India) Ltd. over exposed reinforcement including proper curing for minimum 24 hours.

Sqm

Rs.69.52

D. Applying Epoxy based bonding agent Sikadur 32 LP @ 250gms per sq.m. per coat for proper bonding of old and new concrete.

Sqm

Rs.411.71

E. Applying and placing cementitious micro-concrete Sika Rep by proper mixing with clean water after erection of formwork followed by proper curing for minimum 28days (Formwork to be measured and paid separately).

Cum

Rs.59,059.65


Sqm

Rs.88.13

B. (i) Applying two coats of cement based polymer modified anti-corrosive protective coating Sika Top Armatec 108 of Sika (India) Ltd./ THORO STRUCTURITE PRIMER of BASF over exposed reinforcement including proper curing for minimum 24 hours.

Sqm

Rs.61.00

B.(ii) Applying two coats of cement based polymer modified anti-corrosive protective coating Sika Topseal of Sika (India) Ltd./Dr. Sealkit Flexibond AP 121 C (Asian Chemicals) over exposed reinforcement including proper curing for minimum 24 hours.

Sqm

Rs.69.52

C. Applying Epoxy based bonding agent Sikadur 32 LP/Dr. Sealkit Bond OTN (Asian Chemicals) @ 250gms per sq.m. per coat for proper bonding of old and new concrete.

Sqm

Rs.411.71

D. Providing, supplying and placing of two component Polymer Modified Mortar Sika Top 122 after erection of formwork as per specification.

Cum

Rs.9,963.00

Sqm

Rs.1,115.96

22.10.6 Repairing of spalled concrete in slabs/ chajjas etc. by the following processes as specified and directed by the department complete at all levels:

22.11 STRENGTHENING OF COLUMNS, BEAMS & SLABS: 22.11.1 Restrengthening of RCC members by the following processes as specified and directed by the department complete at all levels: A. Doing patch work in depression of concrete surface wherever necessary by laying epoxy putty, Nitocote VF of Fosroc Chemicals as specified & directed by the Department complete after proper surface preparation and proper scraping of concrete protrusion (surface preparation including thorough cleaning of surface to be measured and paid separately).


Page-135

Item No.


U ni t

R at e

B. Applying of Nitowrap 410 saturant with wet film thickness @ 250 microns over a coat of saturant epoxy primer Nitowrap 30 of fosroc chemicals with brush followed by fixing of Carbon fibre composite system Nitowrap EP(CF) by pressing on the saturant and impregnate the same by applying a final coat of Nitowrao 410 as specified and directed by the department. (i). In Columns (ii). In Slabs & Beams C. Applying of two coats of two component UV resistant coating Nitowrap 512 over fibre system having wet film thickness of 100 micron as specified and directed by the department.

Sqm Sqm

Rs.3,628.21 Rs.3,658.41

(i). In Columns (ii). In Slabs & Beams

Sqm sqm

Rs.2,799.20 Rs.2,843.20

Sqm

Rs.1,614.10

(i). In Columns : Supply and Application of MBrace CF 230 - Unidirectional Carbon Fiber Reinforcement System of BASF India Ltd having 400Gm/sq.mt weight and having Modulus of elasticity of 240 kN/mm² at the entire length of the beam with one layer after proper application of Concresive 2200 at the entire beam area at a thickness of 2mm, which will be followed by the application of Mbrace saturant after proper curing of Concresive 2200. Mbrace fiber to be applied over Mbrace Saturant at the green condition and after proper wrapping the secod layer of Mbrace Saturant to be applied. Sand to be broadcasted over the Mbrace saturant layer in green condition for application of any top screed or plastering.

Sqm

Rs.4,707.56

(ii). In Slabs & Beams: Supply and application of Ready to use Carbon laminates (Fibre Reinforced

Rm

Rs.3,451.77

Sqm

Rs.2,653.10

Sqm

Rs.1,307.32

22.11.2 Restrengthening of RCC members by the following processes as specified and directed by the department complete at all levels: A. Doing patch work in depression of concrete surface wherever necessary by laying epoxy putty, Concresive 2200 of BASF India Ltd. as specified & directed by the Department complete after proper surface preparation and proper scraping of concrete protrusion (surface preparation including thorough cleaning of surface to be measured and paid separately). B. Applying of MBRACE Fibre strengthening system of BASF India Ltd including laminate and sheet products for increasing the strength of concrete structures. Carbon, Aramid and E-glass can be used to solve problems from change of use to increased load carrying capacity.

Polymer) for the reinforcement of concrete elements with MBrace FRP Laminate of 165/2500,50mm wide & 1.4mm thick System at the bottom portion of the beam, after application of Mbrace Laminate Adhesive , which is having minimum 2.5Mpa adhesion strength. (iii) Strenghtening With Glass Fibre 22.13 Providing applying "XYPEX" Concrete Waterproofing & Durability Enhancement by Crystallization" to be supported by at least two International Test reports showing clear Scanning Electron Microscopic (SEM) photographs of desified and mature crystals forming to plug all the capilary tracks and pores of the concrete permanently and permeability test as per IS 2720 conducted by CBRI. The concrete should not absorb water more than a.5 grams and not more than 1 mm from the concrete surface. The product to be listed in ICC-ES-EVALUATION REPORT INDEX January 2009. The treatment to be carried out on the concrete surfaces as per manufacture's specification


Page-136

CH-23: DISMANTLING AND DEMOLISHING Item No.

23 23.1 23.2


U ni t

R at e

DISMANTLING WORKS

Demolishing lime concrete without damaging the structure and disposal of debris as directed at all levels

Cum

Rs.160.11

Demolishing plain cement concrete including disposal of debris as directed for all levels (i) Prop 8) or :4(1 leaner : mix (ii) Prop 6) :or 3 (1 :richer mix

Cum Cum

Rs.313.80 Rs.545.40

23.3

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Cum

Rs.767.20

23.4

Demolishing RB work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Cum

Rs.673.40

23.5

Extra for cutting reinforcement in RCC or RB work at all levels (Payment to be made on cross sectional area of RCC or RB work obtained by multiplying the length of the cut reinforcement and thickness of the member).

Sqm

Rs.402.80

23.6

Extra for scraping, cleaning and straightening reinforcement from RCC or RB work at all levels

Kg.

Rs.1.90

23.7

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Cum

Rs.435.60

23.8

Demolishing stone rubble masonry including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Cum

Rs.522.90

23.9

Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.

Cum

Rs.1,050.20

23.10 Dismantling steel work in single sections (R.S.Joists, channels, angles, tees and flats etc.) including dismembering and stacking the materials as directed by the Department for all levels.

Kg.

Rs.1.10

23.11 Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels

Kg.

Rs.2.20

23.12 Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Sqm

Rs.34.20

23.13 Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels

Cum

Rs.3,849.90

23.14 Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

Cum

Rs.3,339.00

23.15 Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Sqm

Rs.102.60

23.16 Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Sqm

Rs.138.80

Ch-23 : Dismantling Works

Page-137

Item No.


23.17 Demolishing R.C.C./ P.C.C. pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.

U ni t

R at e

Cum

Rs.707.90

(i) Area of door/window up to 3.00 m2

Each

Rs.64.65

(ii) Area of door/window above 3.00 m2

23.18 Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.

Each

Rs.102.47

23.19 Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls.

Sqm

Rs.101.20

23.20 Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

Sqm

Rs.22.40

Ch-23 : Dismantling Works

Page-138

CH- 24: BAMBOO & WIRE-NETTING WORKS I t enm o

24

D e s cr i pt i on

U ni t

Rate

BAMBOO AND WIRE NETTING WORKS

24.1

Spilt bamboo diagonally woven wall tied with necessary bamboo kamis on both sides @300mm apart tied with galvanised wire/cane slit etc complete as directed.

Sq.m

Rs.176.07

24.2

Bamboo slit walling in timber frame with bamboo slit fitted in to the grooves of the timber frame and stiffened by means of double bamboo slits 25mm wide and not

Sq.m

Rs.410.34

less than 6mm thick spaced at intervals of not more than 400mm apart one slit attached on each side and tied together by means of cane slit/galvd tying wire including 20mm thick cement plaster in prop 1 cement : 6 fine sand on both sides in two coats with curing etc complete (measurement for timber frame shall be measured and paid separately.) 24.3

Renewing / providing single tarja enclosure walls made of Muli / jati bamboo with mature Baruah / Bhaluka bamboo ( 87 mm to 100 mm dia) posts 1300 mm apart and 1800 mm height (approx) above ground and driven 750 mm below ground stiiffened with Muli / Jati bamboo kamis on both the faces 4 lines, including supplying and tying with galvd.wire complete as directed.

Sq.m

Rs.134.00

24.4

Renewing / providing Muli / Jati bamboo double tarja enclosure walls with Baruah / Bhaluka bamboo 87 mm to 100 mm dia.1800 mm apart and 1800 mm height (approx) above ground and driven 750 mm below ground and half Muli / Jati bamboo on both the faces 4 lines, including supplying and tying with galvd.wire

Sq.m

Rs.242.24

Sq.m

Rs.61.57

24.5

complete as directed. Renewing / providing double lattice pattern fencing with mature Baruah / Bhaluka bamboo posts 87 mm to 100 mm dia., 950 mm to 1050 mm above ground and minimum 600mm below ground and 4 lines of double kamies with half round Muli / Jati bamboo on top including supplying and tying with galvd.wire complete as directed.

24.6

Providing jail enclosure wall with matured Jati / Bhaluka / Makhal bamboo 60 mm to 75mm dia.and of height of 3000 mm including taking out and refitting the old timber battens with old and new bolts and nuts, nails etc. and coaltaring (Indoor Coat) two coats on the bamboos and battens and removing and stacking the old materials in proper places as per direction of the deptt.out side the jail compound walls.

Sq.m

Rs.480.24

24.7

Providing bamboo sleeping machang with necessary Bhaluka bamboo post etc. complete.

Sq.m

Rs.254.49

24.8

Providing, fitting, fixing 20 mmx 50 mm mesh expanded metal wall of 18 gauge (1.2 mm thickness) in sal wood dressed frame not more than 1.20 m centre to centre including sal wood beading of 50 mm x 25 mm size sides chamfered , fitted with necessary wood screws spaced not more than 400 mm apart etc. complete as directed (sal wood frame to be measured and paid separately).

Sq.m

Rs.425.65

24.9

Providing, fitting and fixing wire netted wall with 13 mm hexagional mesh made of 20 gauge (0.95mm) over hollock wood dressed frame not more than 600 mm apart including hollock wood beading of 50 mm x 25 mm size sides chamfered , fitted with necessary wood screws spaced not more than 300 mm apart etc. complete as directed (Hollock wood frame to be measured and paid separately).

Sq.m

Rs.513.68

Ch-24 : Bamboo and Wirenetting Works

Page-139

I t enm o

D e s cr i pt i on

U ni t

Rate

24.10 Providing fly proof M.S. wire netting of I.S.gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mmx12 mm size chamfered including fitting, fixing with necessary wood screws etc.complete as directed (timber frame to be measured and paid separately).

Sq.m

Rs.471.36

24.11 Providing bird proof hexagional galvanised wire netting at ceilling level of Assam type building including fitting and fixing with first class local wood frame of size 50mm x 25mm and beads of size 25mm x 10mm (for fitting and fixing the net with wooden frame ) including lifting and fitting the same in position etc. complete as directed including two coats kiricide oiling of timber works.

Sq.m

Rs.185.55

Ch-24 : Bamboo and Wirenetting Works

Page-140

CH-25: MISCELLANEOUS WORKS Item No. MISCELLENEOUS WORKS 25

25.1


25.3

25.4

R at e

Construction of temporary shed with 300mm high plinth and floor , Bhaluka bamboo post driving at least 750mm under ground, height above plinth 2400mm,wattle wall mud plastered and white wash two coats, 100mm thick thatched roof, double mat doors and windows etc. complete as directed as specified. a). With whole Jati bamboo rua frame b). With Jati bamboo kami frame

25.2

U ni t

Sqm Sqm

Rs.621.79 Rs.557.37

(a). With 50mm x 6mm F.I. Double strap.

Set

Rs.357.57

(b). With 45mm x 6mm F.I. Double strap.

Set

Rs.221.99

(a). Light jungle.

Sqm

Rs.0.79

(b). Mediuum jungle.

Sqm

Rs.1.61

Supplying fitting and fixing 750mm long F.I.double straps at the bottom of timber posts with 16mm dia. double bolt and nuts and 550 mm length of straps to be embedded in cement concrete pillar in prop 1:3:6 and balance 200 mm length to remain above with bottom 75 mm to be bent at right angles etc. complete as directed (C.C work to be paid separately)

Jungle clearing including cutting bamboo and trees below 500mm girth and removing the same outside the limit as directed.

Felling and removing a). Bamboo clumps

Sqm

Rs.77.69

b). Bamboo clumps including uprooting stumps.

Sqm

Rs.108.49

(i).500 mm to 1000mm girth.

Each

Rs.77.58

(ii).1000 mm to 1500mm girth.

Each

Rs.154.57

(iii).1500 mm to 1800mm girth.

Each

Rs.306.80

(iv).1800mm girth and above

Each

Rs.610.69

d) Tea bushes

Each

Rs.8.05

e) Tea bushes including uprooting f).Cutting and clearing bushes consisting of plants and all sorts of bambooes including uprooting and removing as necessary and filling up the holes with earth,dressing,ramming etc. complete.

Each

Rs.17.03

Sqm

Rs.11.08

Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.

Sqm

Rs.4.69

Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm

Sqm

Rs.5.47

Each

Rs.1,044.14

c).Cutting trees including uprooting and removing where necessary.

N.B.- All girth measurement for trees are to be taken at 1200 mm height above the ground.

25.5

25.6

25.7

Cutting down trees where the building is to beconstructed of girth exceeding 300mm, grubb ing up roots, filling pits and levelling off ground lopping branches, trimming and removeing to distance beyond 30m and stacking serviceable materials and cleaning site etc. as directed. i).Girth exceeding 300mm but not exceeding 1000mm

Ch-25 : Miscellaneous Works

Page-141

Item No.

25.8

25.9


U ni t

R at e

ii).Girth exceeding 1000mm but not exceeding 1500mm

Each

Rs.1,810.01

iii).Girth exceeding 1500mm but not exceeding 2000mm

Each

Rs.1,927.28

iv).Girth exceeding 2000mm but not exceeding 2500mm

Each

Rs.2,383.63

v).Girth exceeding 2500mm but not exceeding 3000mm

Each

Rs.2,606.98

(a).25mm bore - 300mm long.

Each

Rs.57.53

(b). 40mm bore - 300mm long.

Each

Rs.57.53

(a) 15mm diameter

Each

Rs.144.24

(b) 20mm diameter

Each

Rs.145.70

(c) 25mm diameter

Each

Rs.159.96

(d) 32mm diameter

Each

Rs.171.95

(e) 40mm diameter

Each

Rs.182.45

Rm

Rs.123.66

Each

Rs.784.35

position as directed. a) 100mm thick slab

Sqm

Rs.1,410.90

b) 75mm thick slab

Sqm

Rs.1,277.11

(a) 200 mm thick in foundation and substructureup to plinth level in cement morter (1:6)

Sqm

Rs.628.98

(b) 200 mm thick in super structure in cement morter (1:6) (c) 100mm thick in super structure in cement morter (1:4)

Sqm Sqm

Rs.642.36 Rs.629.15

Providing and fixing galvd. / M.S. tube (light grade) outlet (spout) in cement mortar 1:3 including cutting and making good the wall

Providing 200mm to 450mm long G.I. pipe spout embedded in C.C./ brick works for drainage of water as per direction of the Department including necessary breaking and repair and sealing of joints for all levels.

25.10 Supplying fitting and fixing 200mm x 6mm thick A.C. plain sheet for vertical and horizontal expansion joints fixed to one side of column/ wall by necessary rawal plugs/ screws/ wooden plugs placed not more than 300mm c/c as directed and specified. 25.11 Supplying, fitting and fixing in position R.C.Cboundary pillers of size 150mm x 150mm x.1500mm long, 750mm above ground and 750mm below ground, including square base of 450mm x 450mm x 150mm with 4 nos.12mm MS rods main reinforcement and 6mm MS stirrups at 300mm centres tied in position with annealed binding wire, cement concrete proportion 1:2:4 with broken stone aggregate upto 20mm size including cantering moulding the top,curing,6mm thick cement plastering in proportion 1:3,painted black and white alternately in 230mm strips upto 750mm from the top keeping necessary grooves etc. as per design and direction complete. 25.12 Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in

25.13 Precast concrete block masonry (includingquoin blocks, jamb blocks, closure etc.) withhollow cement concrete blocks of approvedsize conforming to I.S. 2185 - 1965 with1:3:6mix (1cement: 3 coarse sand: 6 graded stoneaggregate , 20 mm and down gauge) having solid materials not less than 50% total volumeof block including curing complete as directed.


Page-142

Item D es c r i p t i onofw or k s No. 25.14 Precast concrete block masonry (includingquoin blocks, jamb blocks, closure etc.) withhollow cement concrete blocks of approvedsize conforming to I.S. 2185 - 1965 with1:6mix (1cement: 6 graded stone aggregate, 20 mm and down gauge) 1/4th having solid materials not less than 50% total volume of block including curing complete as directed.

(a) 200 mm thick in cement sand mortar(1:6) in foundation and substructure upto plinth level

U ni t

R at e

Sqm

Rs.628.98

Sqm Sqm

Rs.644.45 Rs.490.79

(b) 200 mm thick in super structure in cement morter (1:6) (c) 100mm thick in super structure in cement morter (1:4) 25.15 Labour for fitting and fixing hume pipes inpositions with coal tar immediately includingcaulking and joining pieces with cement mortarof proportion 1:3 as per direction of theDepartment including all carriage. i).From 300 mm to 600 mm dia.

Rm

Rs.39.66

ii).From 600 mm to 900 mm dia.

Rm

Rs.123.33

iii).From 900 mm to 1200 mm dia.

Rm

Rs.184.88

25.16 Labour for fitting and fixing single emptybitumen drum in culvert after cutting to proper sizes and fitting in position including allcarriage.

Rm

Rs.64.45

25.17 Labour for fitting and fixing double emptybitumen drum in culvert after cutting to proper sizes and fitting in position including allcarriage.

Rm

Rs.126.36

(a) 25mm wide

Sqm

Rs.1,562.91

(b) 30mm wide

Sqm

Rs.1,691.68

(c ) 40mm wide

Sqm

Rs.1,889.33

(d ) 50mm wide

Sqm

Rs.2,090.98

(e ) 75mm wide

Sqm

Rs.2,809.30

Expansion Joint Filler Board 25.18 Providing and fixing Duraboard HD-100 premoulded compressible filler board at all heights and depths of minimum density 95kg/cum, non-staining having less than 1% water absorption, compression recovery of 93% (minimum) as per manufactured specification with polysulphide sealant to seal the expansion joint including preparation of surface, Polymer Modified Mortar (PMM) (Proportion 1cement: 3 sand:1 acrylic polymer) nozing, carriage of materials, cutting and placing to the required size complete at all levels as per drawings and direction of Engineer-in-Charge.


Page-143

CH-26: ANTI-TERMITE TREATMENT Item No.


U ni t

Rate

26.1 PRE CONSTRUCTION ANTI - TERMITE TREATMENT 26.1.1 Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Sqm

Rs.77.09

b) with aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution.

Sqm

Rs.37.88

26.1.2 Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Sqm

Rs.77.09


Sqm

Rs.37.88

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Sqm

Rs.77.09


Sqm

Rs.37.88


Sqm

Rs.168.27


Sqm

Rs.81.99

26.1.3 Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

26.1.4 Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

Ch-26 : Antitermite Works

Page-144

Item D es cr i pt i onofw or k s No. 26.1.5 Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

U ni t

Rate


R.M

Rs.69.90


R.M

Rs.34.60

(tricel or euivalent) and water, i.e. 1% solution.

Rm

Rs.14.63

ii) with aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution.

Rm

Rs.8.74

i) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Rm

Rs.18.40


Rm

Rs.10.55


Sqm

Rs.44.75


Sqm

Rs.23.39

26.2 POST CONSTRUCTION ANTI - TERMITE TREATMENT 26.2.1 Diluting and injecting aqueous emulsion for post constructional anti - termite treatment (necessary tools and accessories to be supplied by the contractors). a)

Along external wall (where apron is not provided) in the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. by applying the emulsion at 2.5 litres per square meter complete as directed by the Department. i) with aqueous emulsion having concentration 1:19 with chloropirophose solution

b)

c)

Along the external wall below concrete or masonry apron using aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water @ 1 litre per liner metre including drilling and plugging holes (minimum depth of hole should be 300mm).

Treatment of soil under existing floors using aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water @ 0.50 litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor. (Cement mortar to be measured and paid separately). (Minimum depth of hole should be 300mm).

d)

Treatment of existing masonry using aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water @ 0.5 litre per hole, 300mm apart including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole. (Minimum depth of hole should be 300mm).


Page-145

Item No.

e)


U ni t

Rate


Rm

Rs.22.17


Rm

Rs.12.36


Rm

Rs.46.42


Rm

Rs.24.20

Treatment at points of contact of wood work by aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water @ 0.50 litre/hole by drilling 6mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same.


Page-146

CH-27: REPAIRING WORKS Item No.

27.1

27.2

27.3

Description

Taking out from position and repairing steel window shutters including steel frames at all levels after cutting out the heavily rusted and damaged portion of the shutters and frames and welded with the new 'Z' section of steel members, corner, hinges, stay etc. including fitting and fixing in position and riveting with new rivets adjusting, cleaning, cutting the holes and making good the damages to metal with existing one. Window grills to be removed during carrying out the work and to be re-fixed in position after completion of work. The glass panes damaged during execution should also be changed. Strengthening of beam, columns, lintels, chajjas, slabs by applying water proofing treatment, exposed reinforced treatment, sealant application by Micro concrete CNS 100 + M - 81 up to 15mm complete as directed by the Department at all levels. Supplying, fitting and fixing 4mm thick teak plywood sheet after removing the existing damaged teak ply, over timber frame with Fevicol, nails, screws etc. including cutting sheets to proper sizes etc. complete as directed at all levels.

Ch-27 : Repairing Works

Unit

Rate

Sqm

Rs.835.30

Sqm

Rs.460.60

Sqm

Rs.1,345.00

Page-147

CH-28: QUALITY CONTROL Item Description No. 28 28.1 Collection from the field and testing in the laboratory of undisturbed soil sample for sub-soil investigation (as per relevant I.S. code) by open drive sampler (100 mm dia. Boring) through clayey soil layer/sandy soil layer/sandy clay/sandy silt layer/clayey silt layer,conduction standard penetration test(SPT) and collection of SPT sampler,observation of ground water table,spot level survey to the bore location and carrying out R.L. from nearest B.M.,laboratory test (particle size analysis,hydrometer test,liquid limit determination,plastic limit determination,specific gravity determination,triaxal test,direct shear test,unconfined compression test,consolidation test) including preparation of subsoil investigation report complete with necessary printing and binding (minimum 5 copies) A. Boring.

Unit

Rate

(i) Construction of 100mm hand wash boring through all types of cycle,sandy clay,silty sand,silty clay soil,excluding transportation charges.

Rm

Rs.666.16

(ii) Construction of 100mm machine boring (Drilling) through all types of cycle,sandy clay,silty sand,silty clay soil,excluding transportation charges.

Rm

Rs.849.65

(iii) Construction of 100mm machine boring (Drilling) through all types of gravel,sandy gravel excluding transportation charges.

Rm

Rs.3,186.42

(iv) Construction of 100mm machine boring (Drilling) for rock layer, excluding transportation charges.

Rm

Rs.4,305.53

Rm

Rs.88.07

B. Standard Penetration Test (S.P.T.)

(i) Conduction of SPT at equal interval of 1.5 m or change of strata whichever is earlier and collection of disturbed soil sample from SPT sampler including proper airtight sealing,labelling. (ii) Conduction of SPT by DCPT (Method dry) excluding transportation charges.

Rm

Rs.346.52

(iii) Conduction of SPT by DCPT (Method wet) excluding transportation charges.

Rm

Rs.397.36

C. Laboratory test

(i)Particlesizeanalusis(drysieving)

pertest

Rs.144.46

(ii)Particlesizeanalusis(wetsieving)

pertest

Rs.157.70

(iii)DeterminationofHydrometertest.

pertest

Rs.736.15

(iv) Determination of liquid limit test. points 3(a)

per test

Rs.230.57

points 2 (b)

per test

Rs.153.71

(v)DeterminationofPlasticLimittest. (vi)DeterminationofMoistureContenttest. (vii)Determinationofbulkdensitytest. (viii) Determination of Specific Gravity test of fine grained soil.. (ix) Determination of Direct shear strength

pertest pertest pertest per test

Rs.138.38 Rs.88.07 Rs.69.97 Rs.182.99

points 3(a)

per test

Rs.474.42

points 2 (b)

per test

Rs.316.27

Ch-28 : Quality Control

Page-148

Item No.

Description

Unit

Rate

(x) Determination of shear strength parameters of a specimen tested in unconsolidated undrained traiaxial compression test without measuring pore water pressure by triaxial test. points 3(a)

per test

Rs.723.80

points 2 (b)

per test

Rs.482.54

(xi) Determination of consolidated drain test determination of the shear strength parameters of a specimen tested in consolidated drain triaxial compression test without measuring pore water pressure,by triaxial test.shear strength parameters of a specimen tested in unconsolidated undrained traiaxial compression test without measuring pore water pressure by triaxial test. points (a) 3

per test

points 2 (b)

per test

Rs.1,435.39 Rs.956.93

points 3(a)

per test

Rs.369.50

points 2 (b)

per test

Rs.246.34

points 3(a)

per test

Rs.876.23

points 2 (b)

per test

Rs.584.16

(xii) Determination of unconfied compressive strength.

(xiii) Determination of consolidation properties of Soil.

(xiv)Determinationof vaneshearstrength.

pertest

(xv) Determination of P ermeability of soil by falling head method. per test (xv) Determination of shear strength parameters of a specimen tested in consolidated undrained traiaxial compression test without measuring pore water pressure by triaxial test.

Rs.651.61 Rs.950.65

points 3(a)

per test

Rs.876.08

points 2 (b)

per test

Rs.584.06

(xvi) Determination of shear strength parameters of a specimen tested in consolidated undrained undrained test compression test with measuring pore water pressure by triaxial test. points (a) 3

per test

points 2 (b)

per test

(xvii)DeterminationofSwellingIndex. D. Transportation on charges for boring. Hire (i)charge

Fuel (ii)

pertest

per day km per

Rs.1,329.37 Rs.886.25 Rs.736.15

Rs.3,811.50 Rs.17.87

28.2 Collection of sample from field and testing in laboratory/field as per relevant I.S. codes of practice and preparation and submission of of the reports to the concerned authority in proper format with specified no. of copies (minimum 5 copies) A. Cement

(i) Compressive strength.

per test

Rs.199.82

(ii) Setting time..

per test

Rs.242.22

(iii) Fineness test.

per test

Rs.526.07

(iv)Impuritiespercentage(Bromoformtest) (v) Ignition test. (vi) Specific gravity.


pertest per test per test

Rs.769.08 Rs.209.35 Rs.508.85

Page-149

Item No.

Description

Unit

Rate

B. Concrete

(i)Compressivestrength(includingmoulding&curing)

pertest

Rs.262.82

(ii)Compressivestrength(excludingmoulding)

pertest

Rs.127.94

(iii) (a) Mix design (b)SubsequentJobMixDesignwithsamematerials. (iv)Tensilestrengthofconcrete.

per test

Rs.8,458.55

pertest pertest

Rs.5,686.73 Rs.766.68

C. Steel (i)Tensilestrength ofsteel.

pertest

Rs.507.12

(ii)Bending&Re-bendingofsteel.

pertest

Rs.592.28

pertest

Rs.477.23

D. Aggregate

(i)Aggregateimpactvaluetest(inoversize) (ii)Aggregateimpactvaluetest(inpropersize)

pertest

Rs.301.66

(iii)Aggregatecrushingvaluetest(inoversize)

pertest

Rs.590.18

(iv)Aggregatecrushingvaluetest(inpropersize)

pertest

Rs.497.76

(v)LosAngelesabrasiontest.

pertest

Rs.559.18

(vi) Flakiness index test.

per test

Rs.382.22

(vii) Specific gravity test.

per test

(viii) Water absorption test.

per test

Rs.272.77

(ix) Soundness test.(5 cycle sodium sulphate

per test

Rs.3,180.38

(x) Grading test of coarse aggregate.

per test

Rs.428.21

(xi) Grading test of fine aggregate.(including fineness modulus,gradation,P.C. of silt and clay and silt factor)

Rs.273.41

pertest

Rs.477.98

(xii) Bulk density test of coarse/fine aggregate-Loose compacted.

per test

Rs.233.65

(xiii) Bulkinf factor of fine aggregate by Lab. Method.

per test

Rs.327.64

(xiv) Bulkinf factor of fine aggregate by Field Method.

per test

Rs.144.82

(xv) Aggregate stripping value test.

per test

Rs.241.34


Page-150

CH-29: FIRE-FIGHTING WORKS Item No. 29.1 29.1.1

Description HYDRANT SYSTEM Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Unit

Rate

each

Rs.9,028.75

29.1.2

Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required. (MAKE: NIRMAL RUBBER/NEWAGE)

each

Rs.5,602.34

29.1.3

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

each

Rs.6,044.52

29.1.4

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) a) 900X600X450

each

Rs.4,855.07

b) 2000 X 1200 X450 Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

each

Rs.9,124.18

each

Rs.2,456.70

each each

Rs.7,979.21 Rs.13,186.36

29.1.5

29.1.6

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 02 way

29.1.7

29.1.8

b) 04 way Providing & fixing of Gun Metal fire Brigade connection (withdrawl connecting head) consisting of 63mm instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 2 way

each

Rs.8,772.05

b) 4 way Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)

each

Rs.14,138.93

each

Rs.4,681.95

Ch-29 : Fire Fighting works

Page-151

Item No. 29.1.9

Description

Unit

Rate

Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

each

Rs.49,568.63

29.1.10 Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

each

Rs.4,834.42

each each

Rs.3,905.85 Rs.6,589.29

b) 150 mm dia

rm rm

Rs.2,719.77 Rs.2,109.90

c) 100 mm dia

rm

Rs.1,597.60

d) 80 mm dia e) 65 mm dia

rm

Rs.1,201.03

rm

Rs.985.00

f) 50 mm dia

rm

Rs.834.58

g) 40 mm dia

rm

Rs.772.95

h) 32 mm dia

rm

Rs.664.30

i) 25 mm dia j) 20 mm dia

rm

Rs.555.71

rm

Rs.452.03

rm

Rs.372.75

a) 200 mm dia

rm

Rs.2,940.40

b) 150 mm dia c) 100 mm dia

rm

Rs.2,330.53

rm

Rs.1,604.78

d) 80 mm dia

rm

Rs.1,409.62

rm

Rs.1,263.25

rm

Rs.897.33

29.1.11 Providing ,Fixing ,Testing & Commissioning of air Release Valve a) 25 mm dia b) 50 mm dia 29.1.12 Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. Make:TATA JINDAL NEZONE a) 200 mm dia

k) 15 mm dia 29.1.13 Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE)

e) 65 mm dia f) 40 mm dia 29.1.14 Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco)


Page-152

Item No.

Description

(a)

150 mm dia

Unit

Rate

each each each

Rs.22,000.07 Rs.18,397.44 Rs.12,485.15

(a) 200 mm dia (b) 150 mm dia

each each

Rs.18,584.24 Rs.17,429.39

(c) 100 mm dia

each

Rs.8,879.44

(d) 80 mm dia

each

Rs.6,543.40

(e) 65 mm dia

each

Rs.5,276.51

(f) 50 mm dia (g) 40 mm dia

each

Rs.4,768.13

each

Rs.3,330.84

each each

Rs.3,712.13 Rs.2,191.67

200 mm dia

each

Rs.15,811.38

150 mm dia

each

Rs.12,113.04

100 mm dia

each

Rs.9,100.38

each

Rs.6,903.65

each

Rs.24,414.72

(b) 150 mm dia 29.1.19 Providing,erection testing & commissioning of pressure gauge 100 mm dia (010Kg/cm2)

each

Rs.14,498.06

each

Rs.1,757.03

29.1.20 Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

each

Rs.3,796.85

29.1.21 Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved) (Make : HD Fire / TYCO)

each

Rs.508.41

29.1.22 Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved) (Make : HD FIRE )

each

Rs.99,356.82

(b) 100 mm dia (c) 80 mm dia 29.1.15 Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO)

29.1.16 Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (a) 50 mm dia (b) 25 mm dia 29.1.17 Providing, Erection, Testing & Commissioning of Cast Iron Sluice Valve/ Gate Valve confirming to IS:14846/2000 complete with matching flanges, rubber insertion, nuts, bolts and washer etc of following size complete as required (MAKE:KOLEY/KALPANA/AUDCO) (a) (b) (c)

(d) 80 mm dia 29.1.18 Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required (a)


200 mm dia

Page-153

Item Description No. 29.1.23 Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd.

(a) 400 mm dia (b) 300 mm dia 29.1.24 Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with

Unit

Rate

rm rm each

Rs.2,447.96 Rs.1,960.06 Rs.13,206.57

each

Rs.3,543.00

each

Rs.4,684.34

30 Long set rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipeMtrs. complete confirming to IS: 884. 29.2 29.2.1

29.2.2

FIRE EXTINGUISHER Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP FIREND FIRE SHIELD Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

29.2.3

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.22,754.01

29.2.4

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (Extinguisher will be TROLLEY MOUNTED).(50 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.32,755.93

29.2.5

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(75 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.37,646.53

29.2.6

Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.3,116.09

29.2.7

Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(50 LITERS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.19,344.23

29.2.8

Supply, Installation, Fixing of WATER CO2 Fire Extinguisher confirming to IS: 940 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI Mark.(09 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

each

Rs.2,628.19

29.2.9

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

each

Rs.9,849.09


Page-154

Item Description No. 29.2.10 Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(6.5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Unit

Rate

each

Rs.11,257.90

29.2.11 Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(9 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

each

Rs.15,651.42

29.2.12 Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS:

each

Rs.6,578.99

each

Rs.5,556.46

each

Rs.11,716.18

each

Rs.1,450.00

29.3.2 Refilling & Servicing of DCP Type 10 Kg Capacity Fire Extinguisher with ISI Mark refill etc. complete

each

Rs.2,275.00

29.3.3 Refilling & Servicing of Water CO2 Type 09 Ltrs Capacity Fire Extinguisher with ISI Mark refill etc. complete

each

Rs.480.00

29.3.4 Refilling & Servicing of Mechanical Foam AFFF Type 09 Ltrs Capacity Fire Extinguisher with ISI Mark refill etc. complete

each

Rs.525.00

29.3.5 Refilling & Servicing of ABC Type 05 Kg Capacity Fire Extinguisher with ISI Mark refill etc. complete

each

Rs.1,670.00

2878 with ISI Mark, (Extinguisher will be TROLLEY MOUNTED)(2KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD 29.2.13 Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD 29.2.14 Supply, Installation, Fixing of ABC stored Pressure Fire Extinguisher with built – In Pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle as per IS:13849 with ISI mark. (10 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD 29.3

FIRE EXTINGUISHER REFILLING & SERVICING

29.3.1 Refilling & Servicing of DCP Type 05 Kg Capacity Fire Extinguisher with ISI Mark refill etc. complete

29.3.6 Refilling & Servicing of CO2 Type Fire Extinguisher with ISI Mark refill etc. complete (a) 02 Kg

each

Rs

720.00

(b) 4.5 Kg

each

Rs

1,650.00

(c) 6.5 Kg

each

Rs

2,325.00

(d) 09 Kg

each

Rs

3,630.00


Page-155

CHAPTER 30. R.C.C APPROACH ROAD Item I t em No. 30.1 Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.)

a) from Private land b) from Government land c) Extra lead beyond initial lead of 3.00km 30.2 Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (a)Using Grading I material

U ni t

R at e

cum

Rs.235.00

cum

Rs.235.00

cum/km

Rs.8.46

cum

Rs.2,040.00

(b)Using Grading II material

cum

Rs.2,094.00

(c)Using Grading III material

cum

Rs.1,965.00

(d) Extra lead beyond initial lead of 5.00km

cum/km

Rs.8.46

30.3 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete a) TMT Bar (i) From Primary Producer

qntl

Rs.6,902.86

(ii) Other ISI Marked approved brand

qntl

Rs.6,026.82

b) ISI approved - M.S. Rod

qntl

Rs.6,767.66

sqm sqm

Rs.276.07 Rs.252.24

(a) M 20 Grade Concrete

cu.m.

Rs.7,218.26

(b) M 25 Grade Concrete

cum

Rs.7,798.14

(c) M 30Grade Concrete

cum

Rs.7,848.98

30.4 Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., and removal of the same for in-situ reinforced concrete and plain concrete work in R.C.C. approach road. (a) Using 38mm thick plank (b) Using 25mm thick plank 30.5 Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compacted and finished in a continuous operation including provision of construction and expansion joints, plasticiser and curing compound of Fosroc/ Sika/ Choksey/ Degusa and hardener of Recron/ Degusa/ Fosroc; finishing to lines and grades and curing as specified and directed complete (form work and reinforcement shall be measured and paid separately).

Ch-30 : RCC Approach Road

Page-156

Item I t em No. 30.6 15 mm thick Cement plaster in single coat with hardener of Recron/ Degusa/ Fosroc on brick/concrete for plastering including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.

U ni t

R at e

(a) In cement mortar 1:3

sqm

Rs.166.34

(b) In cement mortar 1:4

sqm

Rs.146.60

sqm

Rs.937.68

30.7 Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Ch-30 : RCC Approach Road

Page-157

CH-31: ACOUSTIC TREATMENT Item No.

Description

31.1

Supplying, fitting and fixing SoundSoak NSS Cord (FSS Cord) wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings.

Unit

Rate

MM 20a)

Sqm

Rs.4,853.79

MM 25b)

Sqm

Rs.5,149.86

c) Armstrong OPTRA high acoustical wall panelling with fibre glass substrate 25 MM thick d) Armstrong Wood works acoustical wall panelling 31.2

Sqm Sqm

Rs.9,060.37 Rs.9,931.33

Supplying, fitting and fixing SoundSoak FSS Cordura wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.5,900.41

MM 25b)

Sqm

Rs.6,156.16

31.3

Supplying, fitting and fixing SoundSmooth MB Primer (NSS Primer) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.2,931.57

MM 25b)

Sqm

Rs.3,298.50

MM 25c)

Sqm

Rs.3,528.30

31.4

Supplying, fitting and fixing SoundSmooth MB White (NSS White) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.3,168.78

MM 25b)

Sqm

Rs.3,533.86

MM 25c)

Sqm

Rs.3,728.04

31.5

Supplying, fitting and fixing SoundSmooth MB Trax (NSS Trax) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.3,428.23

MM 25b)

Sqm

Rs.3,682.12

31.6

Supplying, fitting and fixing SoundSmooth MB Trax White (NSS Trax) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.3,665.44

MM 25b)

Sqm

Rs.3,919.33

31.7

Supplying, fitting and fixing Mat White (Mat White) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20a)

Sqm

Rs.3,763.66

MM 25b)

Sqm

Rs.4,130.60

31.8

Supplying, fitting and fixing Mat White Trax (Mat White) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 20 a) 31.9

Rs.4,173.22

Supplying, fitting and fixing Sound Sonator with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings.

MM 15a)

Ch-31 : Acoustic Treatment

Sqm

Rs.3,644.44

Page-158

Description

Item No.

Unit

Rate

31.10 Supplying, fitting and fixing Mat Black (Mat Black) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings. MM 15a)

Sqm

Rs.3,544.56

MM 20b)

Sqm

Rs.3,922.62

31.11 Supplying, fitting and fixing SoundSmooth Ebony (NSS Ebony) with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings. MM 15a)

Sqm

Rs.3,114.62

MM 20b)

Sqm

Rs.3,689.53

MM 25c)

Sqm

Rs.3,919.33

31.12 Supplying, fitting and fixing Mat BSB with glass wool of Anutone Acoustics Ltd. Including all fixtures and fittings. 18mm a) 900 kg/ M2

Sqm

Rs.2,794.01

18mm b) 1200 kg/ M2

Sqm

Rs.3,008.86

31.13 Supplying, fitting and fixing SubTex Nubby/Pebble- TEXTURE CEILING of Anutone Acoustics Ltd. Including all fixtures and fittings. 31.13.1 SubTex 15mm a) Square

Sqm

Rs.2,137.31

15mm b) Steppe

Sqm

Rs.2,292.98

15mm a) Square

Sqm

Rs.2,149.25

15mm b) Steppe

Sqm

Rs.2,299.36

31.13.2 SubTex Ebony

31.13.3 FABSTRETCH 25 mm with 50 mm Air Gap 25mm a)

Sqm

Rs.5,293.39

Sqm

Rs.10,507.32

Sqm

Rs.11,032.00

31.13.4 ACT GLD INSTALLED USING IMPALLING CLIPS 25mm a) 31.13.5 ACT GLD INSTALLED USING Z Bar 25mm a) 31.13.6 SOUNDSLATS MM 16 a) PITCH

Sqm

Rs.20,133.05

MM 32 b) PITCH

Sqm

Rs.17,571.91

16 MM c)PITCH FR

Sqm

Rs.25,461.03

32 MM d)PITCH FR

Sqm

Rs.22,899.89

31.14 Armstrong acoustical ceilng 31.14.1 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with beauty sky ( board/tegular) edge tiles with armstrong 24mm exposed grid (600x600x14)mm

Sqm

Rs.1,785.67

31.14.2 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with beauty sky ( board/tegular) edge tiles with armstrong 24mm exposed grid (600x600x15)mm

Sqm

Rs.1,866.32


Page-159

Item No.

Description Unit

Rate

31.14.3 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with optra FG ( board/tegular) edge tiles with armstrong XL 24mm exposed grid (600x600x15)mm

Sqm

Rs.3,801.93

31.14.4 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with dune ( bev. tegular) edge tiles with armstrong XL 15mm exposed / silhouette grid (600x600x16)mm

Sqm

Rs.2,511.53

31.14.5 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with dune ( board/ tegular) edge tiles with armstrong XL 24mm exposed grid (600x600x16)mm

Sqm

Rs.2,350.23

31.14.6 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with fine fissured / classic lite ( bev. tegular) edge tiles with armstrong XL 15mm exposed / silhouette grid (600x600x16)mm

Sqm

Rs.2,188.92

31.14.7 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with fine fittured / classic lite ( board/ tegular) edge tiles with armstrong 24mm exposed grid (600x600x16)mm

Sqm

Rs.2,108.27

31.14.8 Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with ANF ( bev. tegular) edge tiles with armstrong XL 15mm exposed / silhouette grid (600x600x16)mm

Sqm

Rs.1,946.97


Page-160

CH-32 : COMPOSITE ITEMS OF WORKS I t emN o. 32.1

D es c r i p t i on

U n it

R at e

RCC Work with Shuttering

32.1.1 Providing and laying pl ai n/ rein forced cement cr oncr et e work s us in g cement , coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) I) Using mixture machine (A) In sub - structure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.6,683.67

(b) M20 or Prop. 1:11/2:3

Cum

Rs.7,250.67

(c) M25 grade concrete

Cum

Rs.8,281.89

(a) M15 or Prop. 1:2:4

Cum

Rs.6,904.19

(b) M20 or Prop. 1:11/2:3

Cum

Rs.7,516.50


Cum

Rs.8,590.77

(a) M15 or Prop. 1:2:4

Cum

Rs.7,624.89

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,197.46


Cum

Rs.8,742.08

(a) M15 or Prop. 1:2:4

Cum

Rs.7,845.41

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,463.29


Cum

Rs.9,050.96

(a) M15 or Prop. 1:2:4 (b) M20 or Prop. 1:11/2:3

Cum Cum

Rs.7,422.09 Rs.7,994.66


Cum

Rs.8,539.28

(a) M15 or Prop. 1:2:4

Cum

Rs.7,642.61

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,260.49


Cum

Rs.8,848.16

(a) M15 or Prop. 1:2:4

Cum

Rs.8,247.72

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,820.29


Cum

Rs.9,364.91

Cum Cum

Rs.8,468.24 Rs.9,086.12


B) In super structure up to 1st floor level i) Vertical members like column, pillars, post, struts etc N) Without using admixture, plasticiser


ii) Horizontal members like beam, lintel, girder bressumer etc. N) Without using admixture, plasticiser


iii) Suspended floor (Slab, balcony, staircase etc) N) Without using admixture, plasticiser


(a) M15 or Prop. 1:2:4 (b) M20 or Prop. 1:11/2:3

Ch-32 : Composite Items of Work

Page-161

I t emN o.

D es c r i p t i on


U n it

Cum

R at e

Rs.9,673.79

i v ) W a l l s ( t h i c k n es s n ot l es s t h an 1 0 0 m m ) i n cl u d i n g a t t a ch ed pi l l a s t e r s , buttresses, plinth and string course etc. N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.7,474.02

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,046.59

(c) M25 grade concrete P) Using admixture, plasticiser etc

Cum

Rs.8,591.20

(a) M15 or Prop. 1:2:4

Cum

Rs.7,694.54

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,312.42


Cum

Rs.8,900.08

v) Vert ical an d hori zont al fi ns (t hi ck ness not more th an 10 0m m) in divi du al ly or forming box louvre and projected band. N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.12,566.67

(b) M20 or Prop. 1:11/2:3

Cum

Rs.13,139.19


Cum

Rs.13,683.84

P) Using admixture, plasticiser etc (a) M15 or Prop. 1:2:4

Cum

Rs.12,787.19

(b) M20 or Prop. 1:11/2:3

Cum

Rs.13,405.02


Cum

Rs.13,992.72

vi) On domes, vaults and shell roof N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.9,785.54

(b) M20 or Prop. 1:11/2:3

Cum

Rs.10,363.66


Cum

Rs.10,913.58


Cum

Rs.10,006.06

(b) M20 or Prop. 1:11/2:3

Cum

Rs.10,629.49


Cum

Rs.11,222.46

(II ) Us in g Ba tchi ng Pl an t/ RM C/ Tr uck mounted batchi ng pl an t in cl udin g Tr an si t Mixer and Concrete Pump (A) In sub - structure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.6,999.98

(b) M20 or Prop. 1:11/2:3

Cum

Rs.7,550.42


Cum

Rs.8,073.99

(a) M15 or Prop. 1:2:4

Cum

Rs.7,220.50

(b) M20 or Prop. 1:11/2:3

Cum

Rs.7,816.25


Cum

Rs.8,382.87


(B) Super-structure from plinth level upto 1st floor level. i) Vertcal members (Column, pillars, post, struts etc) N) Without using admixture, plasticiser


Page-162

I t emN o.

D es c r i p t i on

U n it

R at e

(a) M15 or Prop. 1:2:4

Cum

Rs.7,899.48

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,495.23


Cum

Rs.9,061.86


Cum

Rs.8,120.00

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,761.06


Cum

Rs.9,370.74

(a) M15 or Prop. 1:2:4

Cum

Rs.7,696.68

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,292.43


Cum

Rs.8,859.06


Cum

Rs.7,917.20

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,558.26


Cum

Rs.9,167.94

(a) M15 or Prop. 1:2:4

Cum

Rs.8,522.31

(b) M20 or Prop. 1:11/2:3

Cum

Rs.9,118.06


Cum

Rs.9,684.69


Cum

Rs.8,742.83

(b) M20 or Prop. 1:11/2:3

Cum

Rs.9,383.89


Cum

Rs.9,993.57

ii) Horizontal members (Beam, lintel, girder etc.) N) Without using admixture, plasticiser

iii) Suspended floor (Slab, balcony, staircase etc) N) Without using admixture, plasticiser

i v ) W a l l s ( t h i c k n es s n ot l es s t h an 1 0 0 m m ) i n cl u d i n g a t t a ch ed pi l l a s t e r s , buttresses, plinth and string course etc. N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4

Cum

Rs.7,838.68

(b) M20 or Prop. 1:11/2:3

Cum

Rs.8,434.43


Cum

Rs.9,001.06


Cum

Rs.8,059.20

(b) M20 or Prop. 1:11/2:3 (c) M25 grade concrete

Cum Cum

Rs.8,700.26 Rs.9,309.94

(a) M15 or Prop. 1:2:4

Cum

Rs.12,398.08

(b) M20 or Prop. 1:11/2:3

Cum

Rs.12,993.84


Cum

Rs.13,560.45


Cum

Rs.12,618.60

(b) M20 or Prop. 1:11/2:3

Cum

Rs.13,259.67


Cum

Rs.13,869.33

Cum

Rs.9,490.18

v) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band. N) Without using admixture, plasticiser

v) On domes, vaults and shell roof N) Without using admixture, plasticiser

(a) M15 or Prop. 1:2:4


Page-163

I t emN o.

D es c r i p t i on

U n it

R at e

(b) M20 or Prop. 1:11/2:3

Cum

Rs.10,085.93


Cum

Rs.10,652.56


32.1.2 32.2

32.2.1

(a) M15 or Prop. 1:2:4

Cum

Rs.9,710.70

(b) M20 or Prop. 1:11/2:3

Cum

Rs.10,351.76


Cum

Rs.10,961.44

Extra for every subsequent floor above 1st floor on item no 32.1.(I)

Cum

Rs.306.19

Brickwork with Plastering Br ick work in cement morter with 1st class brick including cement mortar plastering, racking out joints and dewatering if necessary, and curing complete as directed in sub-structureup to plinth level. (I) One side plastering with 10mm thick i) Using plastering of cement mortar prop. 1:4

a)Brickworkincementmorterproportion1:5

Cum

Rs.6,138.40

b)Brickworkincementmorterproportion1:6

Cum

Rs.6,023.15


Cum

Rs.6,099.36


Cum

Rs.5,984.11


Cum

Rs.6,073.32


Cum

Rs.5,958.07


Cum

Rs.6,263.84


Cum

Rs.6,148.59


Cum

Rs.6,217.71


Cum

Rs.6,102.46

iii) Using plastering of cement mortar prop. 1:6 a)Brickworkincementmorterproportion1:5

Cum

Rs.6,179.66


Cum

Rs.6,064.41


Cum

Rs.6,575.84


Cum

Rs.6,460.59


Cum

Rs.6,513.71


Cum

Rs.6,398.46

Cum

Rs.6,461.62

ii) Using plastering of cement mortar prop. 1:5

iii) Using plastering of cement mortar prop. 1:6

(II) One side plastering with 15mm thick i) Using plastering of cement mortar prop. 1:4


(III) One side plastering with 20mm thick i) Using plastering of cement mortar prop. 1:4





Page-164

I t emN o.

D es c r i p t i on

b)Brickworkincementmorterproportion1:6 32.2.2

U n it

Cum

R at e

Rs.6,346.37

Br ick work in cement mortar with 1st class brick including cement motar plastering, racking out joints and curing complete as directed in superstructure above plinth level up to 1st floor level. A) One side plastering I) 10mm thick plastering i) In prop. 1:4


Cum

Rs.6,304.91


Cum

Rs.6,189.65


Cum

Rs.6,265.87


Cum

Rs.6,150.61


Cum

Rs.6,239.83


Cum

Rs.6,124.57


Cum

Rs.6,430.35


Cum

Rs.6,315.09


Cum

Rs.6,384.22


Cum

Rs.6,268.96


Cum

Rs.6,346.17


Cum

Rs.6,230.91

i) In prop. 1:4 a)Brickworkincementmorterproportion1:5

Cum

Rs.6,945.04


Cum

Rs.6,829.78


Cum

Rs.6,859.91


Cum

Rs.6,744.65


Cum

Rs.6,795.79


Cum

Rs.6,680.53

Cum

Rs.7,070.48

ii) In prop. 1:5

iii) In prop. 1:6

II) 15mm thick plastering i) In prop. 1:4

ii) In prop. 1:5

iii) In prop. 1:6

B) Both side plastering

I) With fair side 10mm thick and rough side 15mm thick plastering

ii) In prop. 1:5

iii) In prop. 1:6

II) With both side 15mm thick plastering i) In prop. 1:4



Page-165

I t emN o.

D es c r i p t i on


U n it

R at e

Cum

Rs.6,955.22


Cum

Rs.6,978.26


Cum

Rs.6,863.00

Cum Cum

Rs.6,902.13 Rs.6,786.87

ii) In prop. 1:5

iii) In prop. 1:6

a)Brickworkincementmorterproportion1:5 b)Brickworkincementmorterproportion1:6 32.2.3 32.2.4

Ex tr a ov er it em no. 32 .2 .2 above for brick work in each subsequent floor or part thereof above 1st floor level. Br ick work in cement morter with 1st class brick including cement mortar plastering, racking out joints and dewatering if necessary, and curing complete as directed in sub-structureup to plinth level.

Cum

Rs. 293.57

I) One side plastering with 10mm thick i) Using plastering of cement mortar prop. 1:4


Cum

Rs.1,411.69


Cum

Rs.1,384.95


Cum

Rs.1,402.71


Cum

Rs.1,375.97


Cum

Rs.1,396.72


Cum

Rs.1,369.98


Cum

Rs.1,440.54


Cum

Rs.1,413.80


Cum

Rs.1,429.93


Cum

Rs.1,403.19


Cum

Rs.1,421.18


Cum

Rs.1,394.44


Cum

Rs.1,512.30


Cum

Rs.1,485.56


Cum

Rs.1,498.01


Cum

Rs.1,471.27



II) One side plastering with 15mm thick i) Using plastering of cement mortar prop. 1:4



III) One side plastering with 20mm thick i) Using plastering of cement mortar prop. 1:4




Page-166

I t emN o.

32.2.5

D es c r i p t i on

U n it

R at e


Cum

Rs.1,486.03


Cum

Rs.1,459.29

Br ick work in cement mortar with 1st class brick including cement motar plastering, racking out joints and curing complete as directed in superstructure above linth level u to 1st floor level. A) One side plastering I) 10mm thick plastering i) In prop. 1:4


Cum

Rs.1,450.16


Cum

Rs.1,423.43


Cum

Rs.1,441.18


Cum

Rs.1,414.45


Cum

Rs.1,435.19


Cum

Rs.1,408.46


Cum

Rs.1,479.01


Cum

Rs.1,452.28


Cum

Rs.1,468.40


Cum

Rs.1,441.67


Cum

Rs.1,459.65


Cum

Rs.1,432.92


Cum

Rs.1,597.39


Cum

Rs.1,570.66


Cum

Rs.1,577.81


Cum

Rs.1,551.08


Cum

Rs.1,563.06


Cum

Rs.1,536.33

Cum

Rs.1,626.24

ii) In prop. 1:5

iii) In prop. 1:6

II) 15mm thick plastering i) In prop. 1:4

ii) In prop. 1:5

iii) In prop. 1:6

B) Both side plastering

I) With fair side 10mm thick and rough side 15mm thick plastering i) In prop. 1:4

ii) In prop. 1:5

iii) In prop. 1:6

II) With both side 15mm thick plastering i) In prop. 1:4 a)Brickworkincementmorterproportion1:5


Page-167

I t emN o.

D es c r i p t i on


U n it

R at e

Cum

Rs.1,599.51


Cum

Rs.1,605.03


Cum

Rs.1,578.30

Cum Cum

Rs.1,587.52 Rs.1,560.79

ii) In prop. 1:5

iii) In prop. 1:6

a)Brickworkincementmorterproportion1:5 b)Brickworkincementmorterproportion1:6 32.2.6 32.2.7

Ex tr a ov er it em no. 32 .2 .2 above for brick work in each subsequent floor or part thereof above 1st floor level. 11 2m m th ick 1s t cl as s br ick nogg ed wainll cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)

Cum

Rs. 67.37

A) One side plastering I) 10mm thick plastering i) In prop. 1:4


Sqm

Rs.1,507.11


Sqm

Rs.1,464.70

c) Brick work in cement morter proportion 1:6

Sqm

Rs. 1,411.69

ii) In prop. 1:5


Sqm


Sqm


Rs. 1,498.13

Rs.1,455.72 Sqm

Rs. 1,402.71

iii) In prop. 1:6


Sqm


Sqm


Rs. 1,492.14

Rs.1,449.73 Sqm

Rs. 1,396.72

II) 15mm thick plastering i) In prop. 1:4 a)Brickworkincementmorterproportion1:4

Sqm


Sqm


Rs. 1,537.49

Rs.1,495.08 Sqm

Rs. 1,442.07

ii) In prop. 1:5


Sqm


Sqm


Rs. 1,526.89

Rs.1,484.48 Sqm

Rs. 1,431.47

iii) In prop. 1:6


Sqm


Sqm



Rs. 1,518.13

Rs.1,475.72 Sqm

Rs. 1,422.71

Page-168

I t emN o.

D es c r i p t i on

U n it

R at e

B) Both side plastering I) With fair side 10mm thick and rough s ide 15mm thickplastering i) In prop. 1:4


Sqm


Sqm

c) Brick work in cement morter proportion 1:6 ii) In prop. 1:5

Rs. 1,654.34

Rs.1,611.93 Sqm


Sqm


Sqm


Rs. 1,558.92 Rs. 1,634.76

Rs.1,592.35 Sqm

Rs. 1,539.34

iii) In prop. 1:6


Sqm


Sqm


Rs. 1,620.01

Rs.1,577.60 Sqm

Rs. 1,524.59

II) Both side 15mm thick plastering i) In prop. 1:4


Sqm


Sqm


Rs. 1,683.19

Rs.1,640.78 Sqm

Rs. 1,587.77

ii) In prop. 1:5


Sqm


Sqm


Rs. 1,661.98

Rs.1,619.57 Sqm

Rs. 1,566.56

iii) In prop. 1:6

32.2.8

32.3 32.3.1


Sqm


Sqm

Rs. 1,644.47

Rs.1,602.06


Sqm

Rs. 1,549.05

Ex tr a ov er it em no 32 .2 .4 for brick walling including plastering for each subsequent floor or part thereof above the 1st floor level.

Sqm

Rs.459.28

CEMENT CONCRETE FLOORING WITH BRICK SOLING 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including brick on flat soling, curing etc. complete as directed.


Sqm

Rs. 764.05

Page-169

I t emN o.

D es c r i p t i on

U n it

R at e

32.3.2

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including brick on flat soling,curing etc. complete as directed.

Sqm

Rs. 869.62

32.3.3

40 mm thick red oxide floor with under layer of 30 mm thick cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of size 20 mm and down) and top layer of 10mm thick plaster of cement red-oxide of iron per 50 kg of cement in prop. 1:3 (1 cement red oxide: 3 coarse sand) finished with a floating coat of neat cement red oxide mix of same proportion including brick on flat soling,

Sqm

Rs. 800.61

32.3.4

Providing and laying 50mm thick C.C. floor with metallic concrete hardener topping under layer of 35 mm thick cement concrete in prop.1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approved quality by weight) including finishing brick on flat soling with curing complete as directed. (For Laboratory & Workshop Floor)

Sqm

Rs. 868.81

32.3.5

Providing and laying 65mm thick C.C. floor with metallic concrete hardener topping under layer of 50 mm thick cement concrete 1:2:4 (1cement:2 coarse sand:4 coarse aggregate of 20

Sqm

Rs. 979.99

mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement: 1 part of metallic floor hardening compound of approved quality by weight) including brick on flat soling, finishing with curing complete as directed. (For Labora tor y & Workshop Floor)

32.4 DOORS / WINDOWS WITH ALL FITTINGS 32.4.1 Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (3nos X100mm x75 mm x3.55 mm), 300x10 mm Tower bolts-2nos,150 mm Door handle-2nos, 300x16mmSliding Door bolts-2nos and Door stopper with rubber stopper-1nos with necessay screws all complete as directed I) Using Electro Coloured Iron fittings A) With Teak wood / Sissu

wood.

(i). 40 mm thick.

Sqm

Rs.5,175.74

(ii). 35 mm thick.

Sqm

Rs.4,875.51

(iii) 30 mm thick.

Sqm

Rs.4,403.94

(i) 40 mm thick.

Sqm

Rs.3,832.12

(ii) 35 mm thick.

Sqm

Rs.3,666.05

(iii) 30 mm thick.

Sqm

Rs.3,408.44

(i) 40 mm thick.

Sqm

Rs.3,560.33

(ii). 35 mm thick.

Sqm

Rs.3,420.07

(iii). 30 mm thick.

Sqm

Rs.3,342.20

B) With 1st class local wood

C).With 1st class local wood(Bola )


Page-170

I t emN o.

D es c r i p t i on

U n it

R at e

II) Using Aluminium Fittings A) With Teak wood / Sissu

wood.

(i) 40 mm thick.

Sqm

Rs.5,330.38

(ii) 35 mm thick.

Sqm

Rs.5,030.15

(iii) 30 mm thick.

Sqm

Rs.4,558.58

(i) 40 mm thick.

Sqm

Rs.3,986.76

(ii) 35 mm thick.

Sqm

Rs.3,820.69

(iii) 30 mm thick.

Sqm

Rs.3,563.08

(i) 40 mm thick.

Sqm

Rs.3,714.97

(ii) 35 mm thick.

Sqm

Rs.3,574.71

(iii) 30 mm thick.

Sqm

Rs.3,347.02

(i). 40 mm thick.

Sqm

Rs.5,868.63

(ii). 35 mm thick.

Sqm

Rs.5,465.68

(iii) 30 mm thick.

Sqm

Rs.4,460.18

(i) 40 mm thick.

Sqm

Rs.4,158.63

(ii) 35 mm thick.

Sqm

Rs.3,993.05

(iii) 30 mm thick.

Sqm

Rs.3,374.73

(i) 40 mm thick. (ii). 35 mm thick.

Sqm Sqm

Rs.4,107.39 Rs.3,945.75

(iii). 30 mm thick.

Sqm

Rs.3,342.20

(i) 40 mm thick.

Sqm

Rs.6,023.27

(ii) 35 mm thick.

Sqm

Rs.5,620.32

(iii) 30 mm thick.

Sqm

Rs.4,614.82

(i) 40 mm thick.

Sqm

Rs.4,313.27

(ii) 35 mm thick.

Sqm

Rs.4,147.69

(iii) 30 mm thick.

Sqm

Rs.3,529.37

B) With 1st class local wood (Gamari/ Hollock/ Bonsum )


32.4.2 Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm), 300x10 mm Tower bolts-2nos,150 mm Door handle-2nos, 300x16mm- Sliding Door bolts-2nos and Door stopper with

rubber stopper-1nos with necessay screws complete as directed I) Using Electro Coloured Iron fittings A).With Teak wood / Sissu

wood.



II) Using Aluminium Fittings A) With Teak wood / Sissu

wood.

B) With 1st class local wood (Gamari/ Hollock/ Bonsum )


Page-171

I t emN o.

D es c r i p t i on

U n it

R at e


32.4.3

(i) 40 mm thick.

Sqm

Rs.4,262.03

(ii) 35 mm thick.

Sqm

Rs.4,100.39

(iii) 30 mm thick.

Sqm

Rs.3,496.84

(i). 40 mm thick.

Sqm

Rs.6,219.92

(ii). 35 mm thick.

Sqm

Rs.5,435.26

(iii) 30 mm thick.

Sqm

Rs.5,232.40

(i) 40 mm thick.

Sqm

Rs.4,582.51

(ii) 35 mm thick.

Sqm

Rs.4,146.06

(iii) 30 mm thick.

Sqm

Rs.4,033.22

(i) 40 mm thick.

Sqm

Rs.4,534.27

(ii). 35 mm thick.

Sqm

Rs.4,108.08

(iii). 30 mm thick.

Sqm

Rs.3,997.89

Sqm

Rs.6,374.56

(ii) 35 mm thick.

Sqm

Rs.5,589.90

(iii) 30 mm thick.

Sqm

Rs.5,387.04

(i) 40 mm thick.

Sqm

Rs.4,737.15

(ii) 35 mm thick.

Sqm

Rs.4,300.70

(iii) 30 mm thick.

Sqm

Rs.4,187.86

(i) 40 mm thick.

Sqm

Rs.4,688.91

(ii) 35 mm thick.

Sqm

Rs.4,262.72

(iii) 30 mm thick.

Sqm

Rs.4,152.53

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm),300x12 mm Aluminium Tower bolts-2nos,150 mm Aluminium Door handle-2nos, 300x16mm- Aluminium Sliding Door bolts-2nos and Door stopper with rubber stopper-1nos with necessay screws and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing I) Using Electro Coloured Iron fittings A) With Teak wood / Sissu

wood.



II) Using Aluminium Fittings A).With Teak wood / Sissu (i) 40 mm thick.

wood.

B) With 1st class local wood (Hollock/ Bonsum/ Gamari )

C) With 1st class local wood(Bola )


Page-172

I t emN o.

D es c r i p t i on

32.4.4

Providing fitting and fixing 1st class local wood (Gamari/ Bonsum/ Hollock) battened, framed and braced door and window shutters using 25mm thick planks including oxidised iron butt hinges (100mm x58 mm x1.90 mm) 6 nos, 250x10 mm Aluminium Tower bolts-2nos, 150 mm Aluminium Door handle-2no, 250x16mmAluminium Sliding Door bolts-1nos with necessay screws complete as directed

32.4.5

Providing, fitting and fixing fully glazed wooden door shutters with necessary butt

U n it

R at e

Sqm

Rs.2,741.36

Sqm

Rs.2,222.36

hinges, 250x10 mm Aluminium Tower bolts-2nos, 150 mm Aluminium Door handle2nos and Door stopper with rubber stopper-1nos with necessay screws etc. complete as per approved drawing as directed and specified at all levels.( glass panes should be measured and paid seperately.) (A) With Gamari Wood.

(i) 40mm thick (ii) 35mm thick

Rs. 2,139.59

(B)With 1st Class Local wood

32.4.6

(i) 40mm thick

Sqm

Rs.2,040.91

(ii) 35mm thick

Sqm

Rs.2,040.91

(i) 40mm thick

Sqm

Rs.2,222.36

(ii) 35mm thick

Sqm

Rs.2,139.59

(ii) 30mm thick

Sqm

Rs.1,998.72

(i) 40mm thick

Sqm

Rs.2,196.36

(ii) 35mm thick

Sqm

Rs.2,116.80

(ii) 30mm thick

Sqm

Rs.1,979.25

(i) 40mm thick

Sqm

Rs.2,012.90

(ii) 35mm thick

Sqm

Rs.1,956.47

(ii) 30mm thick

Sqm

Rs.1,836.90

(i) 40mm thick

Sqm

Rs.1,991.49

(ii) 35mm thick

Sqm

Rs.1,937.66

(ii) 30mm thick

Sqm

Rs.1,820.90

Providing, fitting and fixing fully glazed window with sash bars including oxidised M.S butt hinges (75mmx 60mmx3.15mm) 2nos.on each leaf and 3 nos. on single leaf, 2nos of 150mmx10mm Aluminium tower bolt, 1no of 100mm Aluminium handle & 2 nos of aluminium eye hook complete as directed (Glass panes to be measured and paid separately) (I) With Sash Bars (A) With Gamari/ Bansum Wood.

(B)With 1st Class Local wood (Bola)

(II) Without Sash Bars (A) With Gamari/ Bansum Wood.

(B)With 1st Class Local wood (Bola)


Page-173

CH-33 : RAIN WATER HARVESTING SYSTEM Item No.

33.1

Description

Unit

Rate

RAINWATER HERVESTING SYSTEM For R.C.C Roof

33.1.1 Providing,Fixing, testing &Commissioning of Rain water Hervesting system for 1000

Each

Rs.113,757.03

Each

Rs.135,338.47

sq.feet roof area with 110 mm uPVC Class-3 (with uptodate amendment) with pipe extra ofUV ray conforming protection tobyIS:4985-200 Titanium Dioxide(TiO2) directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works) For GI sheet/Diana Roof

33.1.2 Providing,Fixing, testing &Commissioning of Rain water Hervesting system for 1000 sq.feet roof area with 180 mm uPVC Gutter of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO 2 ) along the outer periphery of the GCI/Diana roof ,110 mm UPVC pipe directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works)

Storage of Rainwater

33.1.3 Water storage tank ISI Marked, conforming to IS:12701/1996 (with uptodate amendment). (Excluding Civil Works)

Ch-33 : Rain Water Harvesting

Ltr.

Rs.11.56

Page-174

CH-34 : ORGANIC WASTE DISPOSAL SYSTEM AND STP Item No.

Description

Unit

Rate

Organic Waste Disposal System

34.1

Fully automatic Micro-organism based natural composting system with PLC based control,insulated oil heating chamber,Stainless Steel (SS304) shaft & mixing blade to convert organic waste like kitchen waste , canteen waste etc. to organic manure. a) Capacity 24 Kg

Each

Rs. 579,635.94

b) Capacity 70 Kg

Each

Rs. 1,048,296.88

c) Capacity 125Kg

Each

Rs. 1,666,385.94

d) Capacity 250 Kg

Each

Rs. 2,243,721.88

Sewage treatment plant

34.2

Attached growth aerobic Sewage treatment System with FRP treatment chamber with all components including Tertiary filtration system and clorine dosing system to achieve treated water quality suitable for reuse or discharge as per CPCB norms. a) Capacity-10 KLD

Each

Rs. 2,087,501.56

b) Capacity-15 KLD

Each

Rs. 2,223,345.31

c) Capacity-20 KLD

Each

Rs. 2,359,189.06

d) Capacity-30 KLD

Each

Rs. 2,562,954.69

e) Capacity-40 KLD

Each

Rs. 2,834,642.19

Capacity-50 f) KLD

each

Rs. 2,970,485.94

Ch-34: Organic Waste Disposal System and STP

Page-175

CH-35 : THERMAL INSULATION I t emN o.

35.1

D es cr i pt i on

U ni t

R at e

Over Deck(Roof) Insulation: SINGLE LAYER SYSTEM OVER CONCRETE DECK / ACCE SSIBLE ROOF (For Hydro & Thermal Insulation with INSUBOARD)

35.1.1 Day Time Use Building: Providing & Laying of Insuboard over the PCC, 50Mm Thickness.(Make: M/S Supreme or equivalent) (PCC with proper Slope Over RCC)

Sqm

Rs.1,088.16

35.1.2 24-hours Use Building: Providing & Laying of Insuboard over the PCC, 75 Mm Thickness.(Make: M/S Supreme or equivalent) (PCC with proper Slope Over RCC)

Sqm

Rs.1,569.83

35.1.3 Providing & laying of Plastic Sheet (120-150GSM)/Silpaulin (45 GSM) as a vapor barrier.

Sqm

Rs.59.44

35.1.4 Providing & laying of Geo textile 0f 120 GSM as a separating layer over the Poly/Plastic sheet.

Sqm

Rs.90.09

35.1.5 Providing & laying of P.C.C. of (1:2:4) 40 mm. Avg. thickness with 40-45 GSM Glass fiber mesh as reinforcement with proper slope.

Sqm

Rs.6,697.60

35.1.6 Providing & laying of polymer Modified 4mm,Membrane or other water proofing system over the prime slope PCC surface.

Sqm

Rs.2,456.70

35.1.7 Providing & laying of P.C.C. of (1:2:4) 25 mm. Avg. thickness with 40-45 GSM Glass fiber mesh as reinforcement. The PCC will be done in panel form of 1m x 1 ½ m. panel with Control joints & joints are to be sealed with mastic sealant.

Sqm

Rs.6,697.60

35.2

Under Deck (Roof) Insulation: S I N G L E L A Y E R S YS T E M U N D ER DE C K T H E R M A L I N S U L A T I O N S YS T E M W IT H INSU.BOARD

Rs.0.00

35.2.1 Cleaning of the surface by brush

Sqm

Rs.11.61

35.2.2 Day Time use Building: Providing & Laying of Insuboard, thickness 50mm of density 32 kgs/m3) over the RCC ceiling (Plastered Surface) from inside. The insuboard will be fixed over the wall surface by the PVC Fastner(side lap) ( Make: M/s Supreme or equivalent)

Sqm

Rs.1,125.44

35.2.3 24- hours use Building: Providing & Laying of Insuboard, thickness 75 mm of density 32 kgs/m3) over the RCC ceiling (Plastered Surface) from inside. The insuboard will be fixed over the wall surface by the PVC Fastner(side lap) ( Make: M/s Supreme or equivalent)

Sqm

Rs.1,607.11

35.2.4 Providing & laying of wall putty 1mm (Max) thick over the Insuboard's bottom surface & then painting with non solvent base paint after levelling the surface. Over the joint self adhesive Glass fibre mesh tape to be provided

Sqm

Rs.188.73

Wall Insulation: Sqm Th er mal In su lati on sy st em of extern al wall wi th in su boar d an d cement pl as ter finish

Rs.0.00

35.3

Ch-35: Thermal Insulation

Page-176

I t emN o.

D es cr i pt i on

35.3.1 Providing & laying of insuboard of thickness 50mm of density 32kgs/m3) over the Brick+ plaster(Plastered surface from outside. The insuboard will be fixed over the wall surface by PVC Fastner(1250X 600MM) shiplap/Sqr Edge profile and the insuboard joints will be sealed with self glass fibre adhesive.

U ni t

Sqm

35.3.2 Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh Or Providing or laying of wall putty of 1mm(Max) thick over the insuboard's bottom surface and then painting

35.4

R at e

Rs.1,204.66

Rs.0.00

i) Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh

Sqm

Rs.291.39

ii) Providing or laying of wall putty of 1mm(Max) thick over the insuboard's bottom surface and then painting

Sqm

Rs.188.73

Single Layer System inside the cavity wall

35.4.1 Providing & Laying of Insuboard, thickness 50mm of density 32 kgs/m3) over the RCC ceiling (Plastered Surface) from inside. The insuboard will be fixed over the wall surface by the PVC Fastner(side lap) ( Make: M/s Supreme or equivalent)

Ch-35: Thermal Insulation

Rs.0.00 Sqm

Rs.1,088.16

251379294-SOR-Civil-Works-Assam-Pwd-Schedule-2013-14.pdf

Recommend Documents