Work Vest Safety Vest Safety Harness / Belt Face Mask Ear Protection Others (Specify): _________________
OTHER SAFETY EQUIPMENT / REQUIREMENTS
x
Fire Extinguisher Gas Detector Safety Signs Barricades Lifeline
N o
Activity ( Job Steps )
1.
Work permit from Client to be
Tag Out / Lock Out Work Permit Competency Certificate Respirator First Aid Equipment
x
Potential Hazard Unauthorized commencement of works may result in
Control/ Recovery Measures
Authorized lead-operator / in-charge shall ensure obtaining and maintaining valid work permit. The worksite supervisor responsible for this activity has to check
Responsib le/ Action By Leadoperator
HOW CHIN ENGINEERING SDN BHD obtained.
exposing workers and or potential to harm or danger
the PPE of his staff to ensure that all required items are available and properly used. Inform all workers regarding permit condition before work starts. Worksite supervisor shall conduct toolbox talks about nature of works and associated potential hazards and their essential precautionary measure. Follow mobilization schedule and arrange the required documents to avoid any cause of delay. Ensure that the pre task briefing is given out in a language understood by the work force, have it translated. Ask question regarding the briefing to get feedback from the staff, this ensures full comprehension. Issue required appropriate PPE and replace PPE that has signs of defect.
Supervisor
Ensure that adequate shaded areas are provided. Provide proper ventilation and drink plenty of water even if you are not thirst. Wear loose fitting full length clothing that can breathe. Ensure that all markers and signage are of a suitable height to be clearly seen and sufficient lighting is placed to identify the area at night.
Supervisor
2
3
Pre-task briefing toolbox talks.
Set out boundary markers for the work site area.
5 Concreting the wall / Mixing
The work force does not understand the pre task briefing therefore does not understand the potential dangers and control measures to be implemented. Some of the workers could be lacking PPE or using defective PPE.
Heat stress to the labour working on this task. Markers are not clearly visible creating a risk of others coming into the area. Poor access to working area causing of slips, trips, falls
Supervisor Workers
Workers
Supervisor Make sure all workers know the safe limitations of their equipment/tools.
Workers
HOW CHIN ENGINEERING SDN BHD concrete
and or other injuries Penetration not cover that cause falling onto sharp object injuries or falls Walking on the concrete foundation during the pour that causing slipping on wet ply or reinforcement Sharp edges cause of cuts from reinforcement bar ends or tie wire
Handling of Paint (Jotun) General Items Before Leaving Job Site / House -keeping
Sprain or strain cause of improper manual handling Chemical exposure. Unattended/ abandoned plywood, woods that can able the Employees Exposed To Falling In Messy or Unsafe Work Site-Looks Bad For Company & Unsafe For Public Debris Falling From
Ensure all, tools and equipment are in good condition. Ensure to wear loose clothing in good condition with collars closed and cuffs buttoned at the wrist. In case of chemical contact, Remove chemical from skin with waterless hand cleaner Housekeeping regimes to help keep site clear Ensure sufficient space around work areas Ensure there is good access for concrete personnel and equipment Keep other people not directly involved with concrete pouring clear from area Avoid getting feet caught in reinforcement Wear appropriate PPE Provide rest times or alternate work rotation Avoid long periods of twisting, repetitive movements Provide job rotation where there are enough trained employees Ensure the concrete is not too dry when screeding and shoveling
Wear rubber / nitrile glove Refer to MSDS and SDS
Remove Plywood Or Barricades Before Leaving The Job Clear All Mud And Debris From Equipment And job site, Secure All Material Before Exiting The Job Perform two-men carry works where it is needed. Restore Property To Its Original Condition To The Best Of Your Ability
Supervisor Workers Supervisor Workers
HOW CHIN ENGINEERING SDN BHD wheel-barrow
6
Work during extreme weather/ climate conditions.
Over exposure to heat
• • • • • • •
Prepared By : 01/09/2016 Contractor / Contractor Representative
Become acclimated to the heat gradually before working in hot temperatures for a long time; Ensure 100% availability of cold water and always drink plenty of cool water; Wear hats and sunglasses to help stay cool; Take frequent breaks in a cool place, if possible; Wear loose clothing that allows the skin to breathe, such as cotton; Protect your skin from the sun. Keep as much of it covered with clothing as possible. Wearing long-sleeved shirts will help; Field supervision/ supervisor shall closely monitor the condition of workers, intervene as the need arises.