Catalog2011
In-Building Solution Products
Antenna Products
Passive Components
Table of Contents Product Description..................................................................................... 1 Index..............................................................................................................2 Antenna Product.......................................................................................... 4
Indoor Ceiling Antenna.................................................................................. 5 Indoor Wall Mount Antenna.......................................................................... 10 Logarithmic Periodic Antenna...................................................................... 15 Yagi Antenna.................................................................................................. 18 Passive Component....................................................................................... 22 Cavity Power Splitter...................................................................................... 23 Microstrip Power Splitter................................................................................ 26 Cavity Tapper................................................................................................. 29 3dB Hybrid .................................................................................................... 34 Attenuators...................................................................................................... 36 Loads............................................................................................................... 38 Combiners........................................................................................................ 40
Antenna Product Description: HA OA -0809/1825- N - 2/5 ① ② ③ ④ ⑤ ① Company:HA Huawei Agisson ② Type: OA Omnidirectional Antenna, DA directional Antenna , LA Logarithmic Periodic Antenna, YA Yagi Antenna ③ Frequency range (MHz):0809 800~900M,1825 1800~2500M ④ Connector :N N-Female ⑤ Gain:2/5 2dBi/5dBi
Passive Component Product Description: HA S 0825 N 100- 02 ① ② ③ ④ ⑤ ⑥ ① Company:HA Huawei Agisson ② Type:S Power Splitter ,T Tapper , C Combiner ,L load/ Attenuator ③ Frequency range (MHz):0825 800~2500M ④ Connector :N N-Female ⑤ Power capacity:100 100W ( Cavity >100W, Microstrip <100W) ⑥ specifications: S××××02 2 Power Splitter T××××06 6dB Tapper C××××02 2 port combiner L××××05 5dB Attenuator
Index Antenna Type Omnidirectional Ceiling Antenna Directional Ceiling Antenna
Wall Mount Antenna
Logarithmic Periodic Antenna
Yagi Antenna
Frequency Range(MHz)/ Gain/Pattern 698 - 960 /2dBi/360° 1710 - 2700/5dBi/360° 806 - 960 /2dBi/360° 1710 - 2500/5dBi/360° 806 - 960 /4dBi/95° 1710 – 2500/6dBi/75° 806 - 960 /5dBi/95° 1710 – 2500/7dBi/75° 806 - 960 /7dBi/90° 1710 – 2500/8dBi/75° 806 - 960 /8dBi/90° 1710 – 2500/10dBi/75°
Model HAOA-0709/1827-N-2/5 HAOA-0809/1825-N-2/5 HADA-0809/1825-N-4/6 HADA-0809/1825-N-5/7 HADA-0709/1827-N-5/8 HADA-0809/1825-N-7/8
806 - 960 /6dBi/100°
HADA-0809-N-6
806 - 960 /9dBi/65° HADA-0809-N-9 HALA-0809/1825-N-8/9 806 - 960 /8dBi/90° 1710 – 2500/9dBi/75° 806 - 960 /10dBi/90° HALA-0809/1825-N-10/11 1710 – 2500/11dBi/75°
Type no.
Page
99042XWM
6
27010722
7
27010715
8
27010716
9
27010711
11
27010714
12
27010713
13
27010712
14
27010720
16
27010721
17
806 - 960 /10dBi/65°
HAYA-0809-N-10
27010718
19
806 - 960 /11dBi/40°
HAYA-0809-N-11
27010719
20
1920 – 2170/10dBi/40°
HAYA-0809-N-11
27010717
21
Passive Components Type
Frequency Range(MHz)
Model
Type no.
Page
698 - 2700
HAT0727N200-03
27030090
35
800 - 2500
HAT0825N200-03
27030087
35
0 - 3000
HAL0030N005-10
27110013
37
0 - 3000
HAL0030N100-30
27110014
37
0 - 3000
HAL0030N025
27110009
39
0 - 3000
HAL0030N050
27110010
39
0 - 3000
HAL0030N100
27110011
39
806 – 960/1710 – 2170
HAC0821N100-02
27030082
41
806 – 2170/2400 – 2500
HAC0825N100-02
27030084
42
HAC0821N100-03
27030083
43
HAC0825N100-04
27030085
44
3dB Hybrid
Attenuators
Load
Combiner
806 – 960/1710 – 1880/ 1920 – 2170 806 – 960/1710 – 1880/ 1920 – 2170/2400 - 2500
Index Passive Components Type
Frequency
Model
Type no.
Page
698 - 2700
HAS0727N200-02
27020092
24
698 - 2700
HAS0727N200-03
27020093
24
698 - 2700
HAS0727N200-04
27020094
24
800 - 2500
HAS0825N200-02
27020086
25
800 - 2500
HAS0825N200-03
27020087
25
800 - 2500
HAS0825N200-04
27020088
25
698 - 2700
HAS0727N100-02
27020095
27
698 - 2700
HAS0727N100-03
27020096
27
Microstrip Power
698 - 2700
HAS0727N100-04
27020097
27
Splitter
800 - 2500
HAS0825N100-02
27020089
28
800 - 2500
HAS082500-03N1
27020090
28
800 - 2500
HAS0825N100-04
27020091
28
698 - 2700
HAT0727N200-06
27130031
30
698 - 2700
HAT0727N200-10
27130032
30
698 - 2700
HAT0727N200-15
27130033
30
698 - 2700
HAT0727N200-20
27130034
31
698 - 2700
HAT0727N200-30
27130035
31
698 - 2700
HAT0727D200-40
27130036
31
800 - 2500
HAT0825N200-05
27130015
32
800 - 2500
HAT0825N200-06
27130020
32
800 - 2500
HAT0825N200-07
27130016
32
800 - 2500
HAT0825N200-10
27130021
32
800 - 2500
HAT0825N200-15
27130022
33
800 - 2500
HAT0825N200-20
27130023
33
800 - 2500
HAT0825N200-30
27130024
33
800 - 2500
HAT0825D200-40
27130025
33
Range(MHz)
Cavity Power Splitter
Cavity Tapper
Antenna Product
Indoor Omni-directional Ceiling Antenna
Indoor directional Ceiling Antenna
Wall Mount Antenna
Logarithmic Periodic Directional Antenna
Yagi Antenna
Ceiling Antenna
Ceiling Antenna
Feature:
Multiband Design for GSM, CDMA, DCS ,UMTS and LTE
Compact and light weight
Easy Installation
Minimal Visual Impact
Integrated low-loss coaxial cable pigtail
HAOA-0709/1827-N-2/5 2/5 dBi Omnidirectional Ceiling Antenna
Type no.
99042XWM Electrical Properties
1. Drill a Ф18 hole on the ceiling.
Frequency range (MHz)
698 - 960 / 1710 - 2700
Polarization
Vertical
698 - 800 MHz
≤ 1.7
800 - 2700 MHz
≤ 1.5
698 - 960 MHz
2
1710 - 2700 MHz
5
VSWR
Install step
2. Install the antenna as the following picture shows then tighten the bolts. 3. Fix the cable and antenna connector and use water proof tape at the point of connector.
Gain (dBi) 3dB beam width (horizontal) (°)
360
Intermodulation IM3 (dBc)
-150 (2 x 33 dBm)
Max. input power (W)
100
Impedance (Ω)
50
Grounding
DC Grounding
Mechanical Properties Dimensions (H x D) (mm)
Φ:185, H:90
Operating temperature (℃)
-30 to +55
Connector
30 cm jumper and N-50
Antenna Pattern
900 MHz horizontal pattern
2100 MHz horizontal pattern
900 MHz vertical pattern
2100MHz vertical pattern
HAOA-0809/1825-N-2/5 2/5 dBi Omnidirectional Ceiling Antenna
Type no.
27010722
Install step
Electrical Specification Frequency range (MHz)
806 - 960 1710 - 2500
Polarization
Vertical
VSWR
< 1.5
1. Drill a Ф18 hole on the ceiling. 2. Install the antenna as the following picture shows then tighten the bolts.
Gain (dBi)
2
5
3dB beam width (horizontal) (°)
360
360
3dB beam width (vertical) (°)
85
40
Max. CW input power (W)
50
Impedance (Ω)
50
Grounding
DC Grounding
3. Fix the cable and antenna connector and use water proof tape at the point of connector.
Mechanical Specification Dimensions (H x D) (mm)
90 x ф185
Packing dimensions (H x W x D) (mm)
270 x 270 x 150
Net weight (with installation kit) (kg)
0.35
Packing weight (kg)
0.9
Radome material
UV ABS
Operating temperature (℃)
-30 to +55
Connector
N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
HADA-0809/1825-N-4/6 4/6 dBi Directional Ceiling Antenna
Type no.
27010715
Install stepstep Install
Electrical Specification Frequency range (MHz)
806 - 960 1710 - 2500
Polarization
Vertical
VSWR
< 1.5
1. Drill a hole on the ceiling, and please make sure the diameter is between Ф18 and Ф35. 2. Install the antenna as the following picture shows then tighten the bolts.
Gain (dBi)
4
6
3dB beam width (horizontal) (°)
115
85
3dB beam width (vertical) (°)
120
80
Front to back ratio (dB)
≥4
≥8
Max. CW input power (W)
50
Impedance (Ω)
50
Grounding
DC Grounding
3. Fix the cable and antenna connector and use water proof tape at the point of connector.
Mechanical Specification Dimensions (H x D) (mm)
100 x ф176
Packing dimensions (H x W x D) (mm)
195 x 195 x 150
Net weight (with installation kit) (kg)
0.5
Packing weight (kg)
0.8
Radome material
UV ABS
Operating temperature (℃)
-30 to +55
Connector
N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
HADA-0809/1825-N-5/7 5/7 dBi Directional Ceiling Antenna
Type no.
27010716
Install step
Electrical Specification Frequency range (MHz)
806 - 960 1710 - 2500
Polarization
Vertical
VSWR
< 1.5
1. 2.
Gain (dBi)
5
7
3dB beam width (horizontal) (°)
95
75
3dB beam width (vertical) (°)
100
70
Front to back ratio (dB)
≥6
3.
Drill a hole on the ceiling, and please make sure the diameter is between Ф18 and Ф35. Install the antenna as the following picture shows then tighten the bolts. Fix the cable and antenna connector and use water proof tape at the point of connector.
≥8
Max. CW input power (W)
50
Impedance (Ω) Grounding
50 DC Grounding
Mechanical Specification Dimensions (H x D) (mm)
95 x ф180
Packing dimensions (H x W x D) (mm)
180 x 180 x 150
Net weight(with installation kit) (kg)
0.34
Packing weight (kg)
0.7
Radome material
UV ABS
Operating temperature (℃) Connector
-30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
Wall Mount Antenna
Wall Mount Antenna
Feature:
Multiband Design for GSM, CDMA, DCS ,UMTS and LTE
Compact and light weight
Easy Installation
Minimal Visual Impact
Integrated low-loss coaxial cable pigtail
HADA-0809/1825-N-7/8 7/8 dBi Wall Mount Antenna
Type no.
27010711
Install step
Electrical Specification Frequency range (MHz)
806 - 960 1710 - 2500
Polarization
Vertical
VSWR
< 1.5
Gain (dBi)
7
8
3dB beam width (horizontal) (°)
90
75
3dB beam width (vertical) (°)
65
60
Front to back ratio (dB)
≥6
≥8
Max. CW input power (W)
50
Impedance (Ω) Grounding
50
1.
Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper.
2. Hang the antenna on the installation piece and install the connector.
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) 210 x 180 x 44 Packing dimensions (H x W x D) (mm)
250 x 210 x 55
Net weight (with installation kit) (kg)
0.65
Packing weight (kg) Radome material
1.2 UV ABS
Operating temperature (℃) Connector
-30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
HADA-0809/1825-N-7/8 7/8 dBi Wall Mount Antenna
Type no.
27010714
Install step
Electrical Specification Frequency range (MHz) 806 - 960 1710 - 2500 Polarization Vertical VSWR < 1.5 Gain (dBi) 8 10 3dB beam width (horizontal) (°)
90
65
3dB beam width (vertical) (°)
60
55
Front to back ratio (dB)
≥6
≥8
Max. CW input power (W)
50
Impedance (Ω) Grounding
50
1.
Drill a hole on the ceiling, and please make sure the diameter is between Ф18 and Ф35.
2. Install the antenna as the following picture shows then tighten the bolts. 3. Fix the cable and antenna connector and use water proof tape at the point of connector.
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm)
210 x 180 x 44
Packing dimensions (H x W x D) (mm)
250 x 210 x 55
Net weight(with installation kit) (kg)
0.65
Packing weight (kg) Radome material
1.2 UV ABS
Operating temperature (℃) Connector
-30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
HADA-0809-N-6 6 dBi Wall Mount Antenna
Type no.
27010713
Electrical Specification Frequency range (MHz) Polarization VSWR Gain (dBi)
806 - 960 Vertical < 1.5 6
3dB beam width (horizontal) (°)
100
3dB beam width (vertical) (°)
78
Front to back ratio (dB)
≥6
Electrical downtilt (°) Max. CW input power (W)
50
Impedance (Ω) Grounding
Install step
1.
Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper.
2. Hang the antenna on the installation piece and install the connector.
0 50 DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) 260 x 200 x 80 Packing dimensions (H x W x D) (mm) 330 x 225 x 180 Net weight(with installation kit) (kg) 0.6 Packing weight (kg) 1.0 0 - 10
Mechanical tilt (°) Radome material Operating temperature (℃) Connector
UV PVC -30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
900 MHz vertical pattern
HADA-0809-N-9 9 dBi Wall Mount Antenna
Type no.
27010712
Electrical Specification Frequency range (MHz) Polarization VSWR Gain (dBi)
806 - 960 Vertical < 1.5 9
3dB beam width (horizontal) (°)
65
3dB beam width (vertical) (°)
55
Front to back ratio (dB)
≥8
Electrical downtilt (°) Max. CW input power (W)
0
Impedance (Ω) Grounding
Install step
1.
Punch the correct size hole with the drill, and put the stopper into the hole, then after installing the M4×25 screw, fix them into the stepper.
2. Hang the antenna on the installation piece and install the connector.
50 50 DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) 260 x 260 x 42 Packing dimensions (H x W x D) (mm)
330 x 305 x 160
Net weight (with installation kit) (kg)
0.8
Packing weight (kg)
1.2
Mechanical tilt (°) Radome material
0 - 10
Operating temperature (℃) Connector
UV PVC -30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
900 MHz vertical pattern
Logarithmic Periodic Directional Antenna
Logarithmic Periodic Antenna
Feature:
Multiband Design
High Gain
Compact and light weight
Easy Installation
Minimal Visual Impact
Integrated low-loss coaxial cable pigtail
HALA-0809/1825-N-8/9 8/9 dBi Logarithmic Periodic Directional Antenna
Type no.
27010720
Install step
Electrical Specification Frequency range (MHz) 806 - 960 1710 - 2500 Polarization Vertical VSWR < 1.5 Gain (dBi) 8 9 3dB beam width (horizontal) (°)
90
75
3dB beam width (vertical) (°)
60
55
Front to back ratio (dB)
≥ 10
≥ 10
Max. CW input power (W)
50
Impedance (Ω) Grounding
50
1. Combine the installation piece, Serrated Bracket, M8 U clip by using 2 pcs of M8 bolts, flat washer, and spring washer. Bolts are not fully tightened. 2. Install the above combination on the antenna with 2 pcs of screws in M6 x 20, spring washer and flat washer. 3. The whole combination coming from above two steps would be installed on the correct position of theф30 toф50 pole and tighten the M8 bolts.(See the following picture)
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) 295 x 210 x 63 Packing dimensions (H x W x D) (mm) 380 x 250 x 140 Net weight(with installation kit) (kg) 0.9 Packing weight (kg) 1.5 Mechanical tilt (°) Radome material Operating temperature (℃) Connector
0 - 15 UV ABS -30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
HALA-0809/1825-N-10/11 10/11 dBi Logarithmic Periodic Directional Antenna
Type no.
27010721
Electrical Specification Frequency range (MHz) 806 - 960 1710 - 2500 Polarization Vertical VSWR < 1.5 Gain (dBi) 10 11 3dB beam width (horizontal) (°)
65
50
3dB beam width (vertical) (°)
50
40
Front to back ratio (dB)
≥ 12
≥ 12
Max. CW input power (W)
50
Impedance (Ω) Grounding
50
Install step 1. Combine the installation piece, Serrated Bracket, M8 U clip by using 2 pcs of M8 bolts, flat washer, and spring washer. Bolts are not fully tightened. 2. Install the above combination on the antenna with 2 pcs of screws in M6 x 20, spring washer and flat washer. 3. The whole combination coming from above two steps would be installed on the correct position of theф30 toф50 pole and tighten the M8 bolts.(See the following picture)
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) 295 x 210 x 63 Packing dimensions (H x W x D) (mm) 500 x 250 x 140 Net weight (with installation kit) (kg) 1 Packing weight (kg) 2 Mechanical tilt (°) Radome material Operating temperature (℃) Connector
0 - 15 UV ABS -30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
2100 MHz vertical pattern
900 MHz vertical pattern
2100 MHz horizontal pattern
Yagi Antenna
Yagi Antenna Feature: For repeater donor, and other specialized application Low weight, easy installation.
High wind load and ice load High reliability IP65
HAYA-0809-N-10 10 dBi Yagi Directional Antenna
Type no.
27010718
Electrical Specification Frequency range (MHz) Polarization VSWR Gain (dBi)
806 - 960 Vertical < 1.5 10
3dB beam width (horizontal) (°)
65
3dB beam width (vertical) (°)
50
Front to back ratio (dB)
≥ 12 50
Max. CW input power (W)
Install step 1. Install the U clip onto the pole, then install the antenna and fix the flat washer, spring washer and bolt. 2. Fix the cable and antenna connector and use water proof tape at the point of connector. 3. Fix the cable on the pole after finishing the installation.
50
Impedance (Ω) Grounding
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight(with installation kit) (kg) Packing weight (kg)
460 x 190 x 53 480 x 430 x 340 0.38 0.72
Operating temperature (℃) Connector
-30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
900 MHz vertical pattern
HAYA-0809-N-11 11 dBi Yagi Directional Antenna
Type no.
27010719
Electrical Specification Frequency range (MHz) Polarization VSWR Gain(dBi)
806 - 960 Vertical < 1.5 11
3dB beam width (horizontal) (°)
40
3dB beam width (vertical) (°)
35
Front to back ratio (dB)
≥ 12 50
Max. CW input power (W)
Install step 1. Install the U clip onto the pole, then install the antenna and fix the flat washer, spring washer and bolt. 2. Fix the cable and antenna connector and use water proof tape at the point of connector. 3. Fix the cable on the pole after finishing the installation.
50
Impedance (Ω) Grounding
DC Grounding
Mechanical Specification Dimensions (H x W x D) (mm) Packing dimensions (H x W x D) (mm) Net weight (with installation kit) (kg) Packing weight (kg)
805 x 190 x 53 845 x 430 x 340 0.43 0.71
Operating temperature (℃) Connector
-30 to +55 N-Female
Antenna Pattern
900 MHz horizontal pattern
900 MHz vertical pattern
HAYA-0809-N-11 11 dBi Yagi Directional Antenna
Type no.
27010717
Install step
Electrical Specification Frequency range (MHz)
1920 - 2170
Polarization
Vertical
VSWR
< 1.5
Gain (dBi)
12
3dB beam width (horizontal) (°)
40
3dB beam width (vertical) (°)
35
Front to back ratio (dB)
≥ 12
Max. CW input power (W)
50
Impedance (Ω)
50
Grounding
DC Grounding
1. Install the U clip onto the pole, then install the antenna and fix the flat washer, spring washer and bolt. 2. Fix the cable and antenna connector and use water proof tape at the point of connector. 3. Fix the cable on the pole after finishing the installation.
Mechanical Specification Dimensions (H x W x D) (mm)
600 x 150 x 90
Packing dimensions (H x W x D) (mm)
574 x 106 x 56
Net weight(with installation kit) (kg)
0.3
Packing weight (kg)
0.45
Operating temperature (℃)
-30 to +55
Connector
N-Female
Antenna Pattern
2100 MHz horizontal pattern
2100 MHz vertical pattern
Passive Component
Cavity Power Splitter
Microstrip Power Splitter
Cavity Tapper
Microstrip Tapper
3dB Hybrid
Attenuator
Load
Combiner
Cavity Power Splitter
Cavity Power Splitter
Feature
Multiband Design for GSM, CDMA, DCS ,UMTS and LTE
200 watt average power rating
Minimal RF insertion loss
High reliability
Designed for indoor and outdoor applications
RoHS compliant
IP65
Cavity Power Splitter
Electrical Specification Type no.
27020092
27020093
27020094
Model
HAS0727N200-02
HAS0727N200-03
HAS0727N200-04
Frequency range (MHz)
698 - 2700
Dividing
2
3
4
VSWR
≤ 1.2
≤ 1.25
≤ 1.3
Distribute loss (dB)
3.0
4.77
6.02
Insertion loss(Without distribute loss) (dB)
≤ 0.2
≤ 0.3
≤ 0.3
IM3 (dBc)
≤ -150 (2 x 43 dBm)
Max. input power (W)
300
Impedance (Ω)
50
FIT(ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm) without connectors
200 x 24.5 x 24.5
230 x 24.5 x 24.5
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor / Outdoor IP65
Connector
N-Female
HAS0727N200-02
HAS0727N200-03
1
HAS0727N200-04
Cavity Power Splitter
Electrical Specification Type no.
27020086
27020087
27020088
Model
HAS0825N200-02
HAS0825N200-03
HAS0825N200-04
Frequency range (MHz)
800 - 2500
Dividing
2
3
4
≤ 1.3
VSWR Insertion loss (Without distribute loss) (dB)
≤ 0.2
≤ 0.3
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Max. input power (W)
200
Impedance (Ω)
50
≤ 0.3
Passband ripple (dB)
≤ 0.2
≤ 0.3
≤ 0.3
Channel balance (dB)
≤ 0.3
≤ 0.3
≤ 0.3
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
177.5 x 25 x 25
200 x 25 x 25
200 x 25 x 25
Packing dimensions (H x W x D) (mm)
255 x 75 x 35
255 x 75 x 35
255 x 75 x 50
Net weight (kg)
0.184
0.210
0.229
Packing weight (kg)
0.223
0.245
0.268
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAS0825N200-02
HAS0825N200-03
HAS0825N200-04
Microstrip Power Splitter
Microstrip Power Splitter
Feature: Multiband Design for GSM, CDMA, DCS ,UMTS and LTE 100 watt average power rating Minimal RF insertion loss High reliability
Low passive inter-modulation (PIM)
Designed for indoor and outdoor applications RoHS compliant IP65
Microstrip Power Splitter
Electrical Specification Type no.
27020095
27020096
27020097
Model
HAS0727N100-02
HAS0727N100-03
HAS0727N100-04
Frequency range (MHz)
698 - 2700
Dividing
2
3
4
VSWR
≤ 1.3
≤ 1.25
≤ 1.3
Isolation between ports (dB)
> 20
Distribute loss (dB)
3.0
4.77
6.02
Insertion loss (Without distribute loss) (dB)
≤ 0.4
≤ 0.5
≤ 0.6
IM3 (dBc)
≤ -130 (2 x 43 dBm)
Max. input power (W)
100
Impedance (Ω)
50
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm) without connectors
53 x 50 x 18
90 x 86 x 18
118 x 86 x 19
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor / Outdoor IP65
Connector
N - Female
HAS0727N100-02
HAS0727N100-03
1
HAS0727N100-04
Microstrip Power Splitter
Electrical Specification Type no.
27020089
27020090
27020091
Model
HAS0825N100-02
HAS0825N100-03
HAS0825N100-04
Frequency range (MHz)
800 - 2500
Dividing
2
3
VSWR
≤ 1.3
Isolation between ports (dB)
> 20
Insertion loss (Without distribute loss) (dB)
≤ 0.4
≤ 0.5
IM3 (dBc)
≤ -130 (2 x 43 dBm)
Max. input power (W)
100
Impedance (Ω)
50
4
≤ 0.6
Passband ripple (dB)
≤ 0.3
≤ 0.35
≤ 0.35
Channel balance (dB)
≤ 0.2
≤ 0.3
≤ 0.3
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
49 x 58 x 22
84 x 84 x 22
109 x 78 x 22
Packing dimensions (H x W x D) (mm)
109 x 72 x 30
154 x 98 x 30
138 x 123 x 30
Net weight (kg)
0.17
0.321
0.399
Packing weight (kg)
0.209
0.36
0.439
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAS0825N100-02
HAS0825N100-03
HAS0825N100-04
Cavity Tapper
Cavity Tapper
Feature: Multiband Design for GSM, CDMA, DCS ,UMTS and LTE Minimal RF insertion loss,
Low passive inter-modulation (PIM) High reliability 200 watt average main line power Designed for indoor and outdoor applications RoHS compliant IP65
Cavity Tapper
Electrical Specification Type no.
27130031
27130032
27130033
Model
HAT0727N200-06
HAT0727N200-10
HAT0727N200-15
Frequency range (MHz)
698 - 2700 6 ±0.7
Coupling(dB)
10 ±1.0
15 ±1.0
≤ 1.2
VSWR Isolation between ports (dB)
≥ 26
≥ 30
≥ 35
Distribute loss (dB)
1.25
0.45
0.14
Insertion loss(Without distribute loss)(dB)
≤ 0.25
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Max. input power (W)
200
Impedance (Ω)
50
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm) without connectors
130 x 45 x 16
Connector
N - Female
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor / Outdoor IP65
HAT0727N200-06/10/15
Cavity Tapper
Electrical Specification Type no.
27130034
27130035
27130036
Model
HAT0727N200-20
HAT0727N200-30
HAT0727D200-40
Frequency range (MHz)
698 - 2700 20 ±1.0
Coupling (dB)
30 ±1.5
40 ±1.5
≤ 1.2
VSWR Isolation between ports (dB)
≥ 40
≥ 50
≥ 50
Distribute loss (dB)
0.043
0.0043
0.00043
Insertion loss (Without distribute loss)(dB)
≤ 0.25
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Max. input power (W)
200
Impedance (Ω)
50
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
130 x 45 x 16
120 x 43 x 38
Connector
N-Female
Input port: 7/16DIN-50-Male Output port: 7/16DIN-50-Female Coupling port: N-50-Female
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor / Outdoor IP65
HAT0727N200-20/30
HAT0727D200-40
2
Cavity Tapper
Electrical Specification Type no.
27130015
27130020
27130016
27130021
Model
HAT0825N200-05 HAT0825N200-06 HAT0825N200-07 HAT0825N200-10
Frequency range (MHz)
800 - 2500
Coupling (dB)
5 ±0.5
6 ±0.5
7 ±0.5
10 ±1.0
Coupling passband ripple (dB)
≤1
≤1
≤1
≤2
≥ 27
≥ 30
≤ 1.25
VSWR Isolation between ports (dB)
≥ 25
≥ 26
Insertion loss (Without distribute loss) (dB)
≤ 0.5
IM3 (dBc)
≤ -120 (2 x 43 dBm)
Max. input power (W)
200
Impedance (Ω)
50
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
120 x 40 x 16.5
Packing dimensions (H x W x D)(mm)
175 x 75 x 30
Net weight (kg)
0.24
Packing weight (kg)
0.26
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAT0825N200
Cavity Tapper
Electrical Specification Type no.
27130022
27130023
27130024
27130025
Model
HAT0825N200-15 HAT0825N200-20 HAT0825N200-30 HAT0825D200-40
Frequency range (MHz)
800 - 2500
Coupling(dB)
15 ±1
20 ±1
30 ±1
40 ±1.5
Coupling passband ripple(dB)
≤ 2
≤2
≤2
≤3
≤ 1.25
VSWR Isolation between ports(dB)
≥ 35
≥ 40
≥ 50
≥ 60
Insertion loss (Without distribute loss) (dB)
≤ 0.3
≤ 0.3
≤ 0.3
≤ 0.3
≤ -120 (2 x 43 dBm)
IM3 (dBc) Max. input power (W)
200
Impedance (ohm)
50
FIT(ppm / year)
500
≤ -140 (2 x 43 dBm)
Mechanical Specification Dimensions (H x W x D) (mm)
109 x 47 x 38
120 x 40 x 16.5
120 x 40 x 16.5
109 x 47 x 38
Packing dimensions (H x W x D)(mm)
180×80×50
175×75×30
175 x 75 x 30
180 x 80 x 50
Net weight (kg)
0.47
0.24
0.24
0.47
Packing weight (kg)
0.5
0.26
0.26
0.5
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAT0825D200-40
Input port:7/16DIN-Male Output port: 7/16DIN-Female Coupling port:N-Female
3dB Hybrid
3dB Hybrid
Feature:
Multiband Design for GSM, CDMA, DCS ,UMTS and LTE
High isolation
Low passive inter-modulation (PIM)
Low VSWR Combines non-coherent signals 200 watt average power rating High reliability IP65
3dB Hybrid
Electrical Specification Type no.
27030090
27030087
Model
HAT0727N200-03
HAT0825N200-03
Frequency range (MHz)
698 - 2700
800 - 2500
Coupling (dB)
3
3
VSWR
≤ 1.2
≤ 1.3
Isolation between ports (dB)
≥ 23
> 20
Insertion loss (dB)
3 ±0.5
≤ 0.5
IM3 (dBc)
≤ -140 (2 x 43 dBm)
≤ -140 (2 x 43 dBm)
Max. input power (W)
200
200
Impedance (Ω)
50
50
Passband ripple (dB)
≤ 0.7
≤ 0.5
FIT (ppm / year)
500
500
Dimensions (H x W x D) (mm)
170 x 45 x 20
142 x 43.5 x 23
Packing dimensions (H x W x D) (mm)
/
152 x 103 x 30
Net weight (kg)
/
0.428
Packing weight (kg)
/
0.4668
Operating temperature (℃)
-30 to +50
-30 to +50
Storage temperature (℃)
-40 to +55
-40 to +55
Application scene
Indoor / Outdoor IP65
Indoor
Connector
N-Female
N-Female
Mechanical Specification
1
Attenuator
Attenuators
Feature: Wide frequency range ,0 to 3G Power rating up to 100W
Low VSWR
High reliability Female/Female or Male/Female connector
Attenuator
Electrical Specification Type no.
27110013
27110014
Model
HAL0030N005-10
HAL0030N100-30
Frequency range (MHz)
0-3
VSWR
1.2
Attenuation precision (dB)
10 ±0.35
30 ±0.5
Max. input power (W)
5
100 50
Impedance (Ω) Passband ripple (dB)
≤ 0.7
≤ 1.0
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
Φ20 x 52.7
141.5 x 100 x 65
Packing dimensions (H x W x D) (mm)
80 x 40 x 40
206 x 175 x 115
Net weight (kg)
0.0598
1.521
Packing weight (kg)
0.06
1.58
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
Input port: N-Male Output port: N-Female
HAL0030N005-10
HAL0030N100-30
Load
Load
Feature: Resistive film load Wide frequency range ,0 to 3G Low VSWR
High reliability
Load
Electrical Specification Type no.
27110009
27110010
27110011
Model
HAL0030N025
HAL0030N050
HAL0030N100
Frequency range (GHz)
0-3
VSWR
≤ 1.2
Max. input power (W)
25
50
Impedance (Ω)
50
MTBF (hours)
50,000
FIT (ppm / year)
500
100
Mechanical Specification Dimensions (H x W x D) (mm)
80 x 60.5 x 65
80 x 60.5 x 65
100 x 141.5 x 65
Packing dimensions (H x W xD) (mm)
175 x 103 x 115
175 x 103 x 115
206 x 175 x 115
Net weight (kg)
0.535
0.535
1.4868
Packing weight (kg)
0.56
0.566
1.55
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Male
HAL0030N25
HAL0030N50
HAL0030N100
Load
Combiner
Feature: Minimum Loss, Hybrid design High Isolation Low VSWR Multi-Inputs/band for 800/900/1800/2100 High Reliability, RoHS compliant Low PIM , guaranteed performance
Combiner (CDMA&GSM/DCS&WCDMA)
Electrical Specification Type no.
27030082
Model
HAC0821N100-02
Getway
Port2 - Port1
Port3 - Port1
Frequency range (MHz)
806 - 960
1710 - 2170
VSWR
≤ 1.25
Isolation between ports (dB)
≥ 80
Insertion loss (Without distribute loss) (dB)
≤ 0.5
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Rejection
≥ 80
Max. input power (W)
100
Impedance (Ω)
50
Passband ripple (dB)
≤ 0.6
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
151 x 92.5 x 46
Packing dimensions (H x W x D) (mm)
240 x 130 x 85
Net weight (kg)
0.68
Packing weight (kg)
0.8
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAC0821N100-02
Combiner(GSM&DCS&3G/WLAN)
Electrical Specification Type no.
27030084
Model
HAC0825N100-02
Getway
Port2 - Port1
Port3 - Port1
Frequency range (MHz)
806 - 2170
2400 - 2500
VSWR
≤ 1.25
Isolation between ports (dB)
≥ 80
Insertion loss (Without distribute loss) (dB)
≤ 0.5
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Rejection
≥ 80
Max. input power (W)
100
Impedance (Ω)
50
Passband ripple (dB)
≤ 0.6
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
178 x 84 x 21
Packing dimensions (H x W x D) (mm)
255 x 125 x 60
Net weight (kg)
0.62
Packing weight (kg)
0.7
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAC0825N100-02
Combiner (CDMA&GSM/DCS/WCDMA)
Electrical Specification Type no.
27030083
Model
HAC0821N100-03
Getway
Port2 - Port1
Port3 - Port1
Port4 - Port1
Frequency range (MHz)
806 - 960
1710 - 1880
1920 - 2170
VSWR
≤ 1.25
Isolation between ports (dB)
≥ 80
Insertion loss (Without distribute loss) (dB)
≤ 0.8
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Rejection
≥ 80
Max. input power (W)
100
Impedance (Ω)
50
Passband ripple (dB)
≤ 0.6
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
151 x 92.5 x 46
Packing dimensions (H x W x D) (mm)
240 x 130 x 85
Net weight (kg)
0.68
Packing weight (kg)
0.8
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAC0821N100-03
Combiner (CDMA&GSM/DCS/WCDMA/WLAN)
Electrical Specification Type no.
27030085
Model
HAC0825N100-04
Getway
Port2 - Port1
Port3 - Port1
Port4 - Port1
Port5 - Port1
Frequency range (MHz)
806 - 960
1710 - 1880
1920 - 2170
2400 - 2500
VSWR
≤ 1.3
Isolation between ports (dB)
≥ 80
Insertion loss (Without distribute loss) (dB)
≤ 0.8
IM3 (dBc)
≤ -140 (2 x 43 dBm)
Rejection
≥ 80
Max. input power (W)
100
Impedance (Ω)
50
Passband ripple (dB)
≤ 0.6
FIT (ppm / year)
500 Mechanical Specification
Dimensions (H x W x D) (mm)
210 x 176 x 40
Packing dimensions (H x W x D) (mm)
300 x 280 x 160
Net weight (kg)
2.07
Packing weight (kg)
2.4
Operating temperature (℃)
-30 to +50
Storage temperature (℃)
-40 to +55
Application scene
Indoor
Connector
N-Female
HAC0825N100-04
Trademark Notice
and
HUAWEI are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS,NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIALDAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS MANUAL.
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129, P.R. China Tel: +86-755-28780808 Version No.: M3-308130299-20100718-C-2.0 www.huawei.com