Stevens Favorite Info & Exploded Views

Stevens Favorite Info & Exploded Views

STEVE ST EVENS NS " FA VOR VORITE" ITE" RIF RIFLES LES Actual load times m ay take a w hile as these scanned pictures may be large, & depending on the speed of your computer & server Stevens model 1894

There are 4 different early Stevens Favorite mo dels made, the earliest, the Sideplate model, then 1889, the 1894 & the 1915. Then in 1971 Savage came came out with a Stevens Favorite commem commem orative model 71 & then in 197 2 the model 72, (same gun, different different barrel) which w as a look alike to the early guns, but no internal parts were interchangeable with the early guns. Early 1999 saw the factory re-introduce re-introduce a slightly different different Favorite yet, w hich w as designated designated the model 30G

http://www.wisnersinc.com/exploded_vie http://www.wisnersinc.com /exploded_views/Stevens_Favorite ws/Stevens_Favorite_parts.htm _parts.htm (1 of 4) [8/15/2010 [8/15/2010 4:32:43 PM]


In the above Illustration we have tried to utilize known factory parts numbers off the commonly seen 1915 drawing & then renumber the above for the 1894 to be somewhat compatible between the 3 different main models, by using the same numbers where the parts are the same. And by adding either an "A", "B", or "C" to designate if there is a difference between the different model versions. The above numbers therefore may have suffixes that are not be the actual factory parts numbers, but they are what we use to avoid confusion. The above model 1894 will not have any model markings & then some variations especially in the extractors &

also transition guns have been noted. This model was made over the longest time when special orders were accepted. It could have had possibly 4 different extractors, depending on vintage. The only real way to tell which extractor you need, (IF YOURS IS MISSING) is to measure the slot in the barrel & the slot in the breech bolt.

Parts show n in R ED bold letters are the parts that we currently mak e & have for sale. All other num bers are for identification purposes only. Part #

N om enclature

.

P art #

N om enclature

#1B-1

Breech Bolt (.250 wide slot) uses 13B-1 Ext.

.

#19

Link Pin, Upper

#1B-2

Breech Bolt (.250 wide slot) uses 13B-2 Ext.

.

#20B

Link

#1B-3

Breech Bolt (.250 wide slot) uses 6-9 Ejec/Ext.

.

#21B

Link Pin, Lower

#2B

Breech Block Pivot Screw

.

#25B

M ainspring Screw

#6-9BC

Extractor-Ejector Asy, 22RF (new style) .250 wide

.

#27B

Take-Down Screw Assembly

#10AB

Firing P in

#11

Firing Pin retainer Pin

.

#29B

Hammer Screw

#12B

M ainspring-w ith screw hole

.

# 30 BC

Trigger Sprin g

# 13 WB

Ex tr act or (Old S ty le .1 60 w id e b as e, .2 40 t op )

.

# 31 B C

Tr ig ger S pr in g S cr ew

#14B

Ex tractor (.200 w ide full length)

.

#36ABC

Tang Screw (Upper & Low er) (2 needed)

#14B

Frame

.

.

.

#15B

Hammer

.

.

.

#16B

Trigger Screw

.

#5

Dummy Screw

#18

Finger Lever Bushing

.

#10??

Screw for tang sight

#19B

Finger Lever Screw

.

# 35 BC

Forearm Screw

#28

Trigger

This gun actually had model numbers of 17, 20, & 27 assigned to it. But the only reference to these models was on the sales catalogs & not on the guns themselves. These model num bers referred basically to different barrel configurations.

STEVENS FAVORI TE M odel 191 5 http://www.wisnersinc.com/exploded_views/Stevens_Favorite_parts.htm (2 of 4) [8/15/2010 4:32:43 PM]


The Above illustrations taken from Frank de Haas Single Shot Rifles & Actions book with the numbers changed to match factory part numbers

This gun will have 1915 stamped on the upper tang behind the hammer

Parts show n in R ED bold letters are the parts that we currently mak e & have for sale. All other num bers are for identification purposes only. Part #

N om enclature

.

P art #

N om enclature

#1C

Breech Block

.

#20C

Link

#2C

B reech B olt Screw

.

#21

link pin

#3

Butt Plate, Rubber

.

#22

Mainspring

#4

Butt Plate Screw

.

#23

Mainspring Plunger

#5

Dummy Screw

.

#24

Mainspring Plunger Seat

Extractor-Ejector Assembly, 22RF

.

#25C

Mainspring Plunger Screw

#10C

Firing P in

.

#26

Mainspring Plunger Pin

#11

Firing Pin Pin

.

# 27 C

Tak e-Dow n Screw

#12

Fore-end (complete)

.

#28

Trigger

#14

Frame

.

#29C

Trigger Screw

#15C

Hammer

.

# 3 0B C Tr ig ge r S pr in g

# 16 C

H am m er/ T ri gger S crew

.

# 3 1 B C Tr i gg er S p ri n g Sc re w

#69BC

http://www.wisnersinc.com/exploded_views/Stevens_Favorite_parts.htm (3 of 4) [8/15/2010 4:32:43 PM]


#17C

Lever

.

#32

Front Sight, Gold Bead

#18

Lever Bushing

.

#33

Rear Sight, Sporting (complete)

#19C

Lever Screw

.

#34

Rear Sight Step only

.

.

.

# 3 5B C F or ea rm S cr ew

.

.

.

Tang Screw (Upper & Low er) #36ABC (2 needed)

For prices of parts that w e do mak e for this model, click here for Link to Stevens Favorite parts All information appearing on this page, Copyright © 1996-2006 Wisner's Inc., with credit given for original illustrations. All Rights Reserved

Back to Exploded Views Originated 11-23-04 Last updated 01-03-09 J Wisner

http://www.wisnersinc.com/exploded_views/Stevens_Favorite_parts.htm (4 of 4) [8/15/2010 4:32:43 PM]

Stevens Favorite Info & Exploded Views

Recommend Documents