Propertyware Administrator Guide V3 5_021810-1

Propertyware Administrator Guide

Page | i

Copyrights © 2002-2010 Propertyware, Inc. All rights reserved. No part of this publication may be reproduced, reproduced, transmitted or stored in any a ny archives without the expressed written permission of Propertyware, Inc.

PURPOSE This guide is intended for use by Propertyware Administrators.


02-18-10

Page | ii

Table of Contents Overview ................................................................................................................................................ 1 Setup

Functions ...................................................................................................................................... 2

Personal Setup........................................................................................................................................ 3 My Account ......................................................................................................................................... 3 Change Password ............................................................................................................................... 3 Administration Setup.................................................... ........................ ...................................................... ...................................................... ................................................ .................... 5 Company Information................................................... ....................... ....................................................... ...................................................... ........................................... ................ 5 Accounting Preferences ..................................................................................................................... 7 ePayment Settings ............................................................................................................................. 11 Manage Users ................................................................................................................................... 14 Manage Customers ........................................................................................................................... 22 Tenant Screening .............................................................................................................................. 23 Billing .................................................................................................................................................... 25 Plan Options ..................................................................................................................................... 25 Billing Information ............................................................................................................................ 26 Security Settings

................................................................................................................................... 27

Adding an Allowed IP Address................................................... ......................... ...................................................... ...................................................... ............................ 27 Deleting an Allowed IP Address ...................................................... ........................... ...................................................... .................................................. ....................... 27 Activity Logs ......................................................................................................................................... 28 Displaying a History of User Logins .................................................................................................. 28 Displaying a History of QuickBook Syncs ...................................................... .......................... ...................................................... .................................... .......... 28 Customize ............................................................................................................................................. 29 Events ............................................................................................................................................... 36 Charts...................................................... ........................... ..................................................... ...................................................... ...................................................... .................................... .......... 36 Custom Fields.................................................................................................................................... 52 QuickBooks ....................................................................................................................................... 55 Leases ............................................................................................................................................... 55 Maintenance ..................................................................................................................................... 63 Marketing ......................................................................................................................................... 73 Propertyware Administrator Guide

02-18-10

Page | iii

Properties ......................................................................................................................................... 74 Vendors ............................................................................................................................................. 77 Task Lists........................................................................................................................................... 79 Templates ............................................................................................................................................ 80 Mail Merge Templates ..................................................................................................................... 80 Email Templates................................................... ........................ ...................................................... ...................................................... .................................................. ....................... 82 82 Other Functions ................................................................................................................................... 84 Grid Edit ........................................................................................................................................... 84 Closing Account Periods .................................................... ....................... ........................................................ ..................................................... .................................... .......... 85 Updating Your Company Name ...................................................... ........................... ...................................................... .................................................. ....................... 87


02-18-10

Page | 1

Overview The Propertyware Administrator is the primary user within your company responsible for managing your Propertyware account. The Administrator manages a variety of features within within the application such as security, user accounts, customization and more. Although you can create multiple users with administrator privileges, you may want to limit administrator access to a few key individuals within your organization since users with such rights are considered "super users" without restrictions to what functions they can perform in the application.


02-18-10

Page | 2

Setup Functions S etup

functions are available from the Propertyware Se tup menu, and can be accessed from anywhere within the Propertyware application.

The Setup Sideba r The S etup Sidebar displays at the left side of the screen. S etup functions are grouped by the following categories within the S etup Sidebar: y y y y y y y

Personal Setup Administration Setup Billing S ecurity Settings Activity Logs Customize Templates

The Personal Setup category is expanded by default. All other categories are initially displayed collapsed. You can choose to Collapse Collapse All and Expand All Categories Categories within the Sidebar by clicking on the Collapse All or Expand All All button. Alternatively, you can expand or collapse collapse a single category by clicking the + or - symbol next to the catego ry name.


02-18-10

Page | 3

Personal Setup The Personal Setup menu options are available to all Propertyware users, not just Administrators. This is where users can can update their account information and change their password.

My Account By default, the My Account page is displayed when Setup is selected. This page page contains three functions buttons: Edit, Grant S upport Access Access and Change Password. These functions are described below: Edit To update the My Account information click the Edit button. In edit mode, the My Account page changes to the Ma nage Users page, therefore the fields in the My Account page will be discussed in detail under Administration Setup Manage Users section of this reference guide. Gr ant Support Access To allow a Customer Support Representative to access your account, click the Gra nt Support Acc e ss button. Cha nge Pa ss word The Cha ng e Pass word button functions in the same manner as the Change Password function in the Sidebar and is described in detail below.

Change Password Users can change their password using the Chang e Pass word button on their My Account page or by using the Change Password link in the Sidebar. The Change Password page contains a New Password field and a Confirm New Password field. Once a password has been entered into both of these fields, click the Save button. Be sure to review the password requirements noted on the page before entering a new password.


02-18-10

Page | 4

Auto G enerat e New Pass word Users have the option of having the system auto auto generate a password. password. Login information and password is sent to the email address indicated in the My Account page.

To auto generate a new password, click the Auto Ge nerate button, and then click the OK button on the pop-up window. Forgotten P ass words Although an administrator may change passwords for users who have forgotten their passwords, this is not necessary. The Propertyware login page contains a link that that users may click in order to have their password sent to them via email. The user must have access to the email account in order to receive their login information.


02-18-10

Page | 5

Administration Setup In the Administration Setup section you can edit company information, set accounting preferences, review and/or modify your Propertyware subscription settings, review and/or modify your ePayments settings (if you have subscribed to Propertywares ePayments), manage users and customers, review and/or modify your tenant screening preferences (if you have subscribed to Propertywares tenant screening service), and import data into your Propertyware account.

Company Information Information in this section was entered when your Propertyware account was initially created. Click the Edit button to edit Information in any of these fields. Be sure sure to click the Sav e button after editing to record your changes. Fi el d

D escription

Company N a me

Your company name, as entered in this field name, will be globally referenced throughout Propertyware in such features as reports and owners owners statements. Up to to 100 characters are allowed in this field.

Org a nization Typ e

Choose one of the following to t o describe the type of properties that your company manages:  Residential  Commercial  Mixed (both residential and commercial)

Addr ess & Addre ss Cont.

Enter your company company address. For longer addresses, carry over your address to the Address (Cont.) field. field. Up to 100 characters are allowed in each of these fields.

City

Enter the city portion portion of your company address. Up to 40 characters are allowed in this field.

St ate/ Province

Enter the state or province of your company address. Up to 10 characters are allowed in this field.


02-18-10

Page | 6

Fi el d

D escription

Zip /Post al Cod e

Enter the zip code or postal code of your company address. Up to 15 characters are allowed in this field.

Country

Enter the country of your company address. Up to 16 characters are allowed in this field.

Tax ID #

Enter your companys tax ID #. Your tax ID will be entered in your management-company vendor record. Your management-company vendor is used when creating bills to your owners for your management fee.

Account Admin Na me

Enter the name of your Propertyware Administrator, or in the case where you have multiple users with administrator access, the primary Propertyware contact for your company.

Account Admin Em ail

Enter the email address of your Propertyware Administrator.

M ana geme nt Company

Indicate whether or not your company is a management company. If you choose "No", "No", the Management tab in the application will not be visible to your users, including users with the administrator access.

Phone Num be r

Enter the general phone number for your company. Up to 20 characters are allowed in this field.

F ax Num be r

Enter the general fax number for your company. Up to 20 characters are allowed in this field.

Company URL

If your company has a hosted web site, enter the address here. Note that this URL is not your Propertyware portal URL.

Company Logo Width

The width of the your company logo that was uploaded.

Company Logo He ight

The height of your company logo that was uploaded.


02-18-10

Page | 7

Fi el d

D escription

Company Logo

Delete an existing or upload a new company company logo. Click the red x to delete an existing logo. Use the Browse button to locate locate an image to upload. Verify the width width and height of the image and adjust those settings, if necessary, prior to clicking the Uplo ad button. Formats supported are .bmp, .gif, .jpg and .png. The company logo uploaded here will appear on your owner statements

Important A management-company vendor is one or more vendor records that identify your management company as a vendor. Propertyware by default default creates one such management-company vendor record which is used when billing owners for management fees. You can, can, however, create additional management-company vendors when billing owners for non-management-related expenses.

Accounting Preferences In the Accounting Preferences section, you can set options for when recurring charges are posted to tenant ledgers, how to handle prepayments, NSF charges and late fees. You can also specify whether payments received should be automatically deposited into a bank account or left as undeposited funds to be manually deposited. Check stock stock templates and check printing options can be found in this section as well. Fi el d


D escription

02-18-10

Page | 8

Fi el d

D escription

Post Auto Cha rges

S et

a global rule for how many days in advance of the due date lease charges should automatically post to tenant ledgers. This rule is set set by default to to "5 Days Before Due" and may be changed. Refer to Considerations when setting Post Auto Charges and Auto Apply Prepayment to Rent at the end of this section for more information information regarding this setting. setting.

Auto Apply Pr epaym ents to Rent

S et

this to Yes if you wish to have Propertyware automatically apply any prepayments to unpaid rent charges. This option is ideal for applying prepayments to new rent auto charges at the time they post to tenant ledgers as this eliminates the need for you to manually apply prepayments. If want to manually apply prepayments against any outstanding charges, set this to No. Refer to Considerations when setting Post Auto Charges and Auto Apply Prepayment to Rent at the end of this section for more information regarding this setting.

Dir ect D eposit to Bank Account

This field controls what occurs when payments are received. When set to Enabled, any payments entered are automatically shown as being deposited in Propertyware. This bypasses the Bank Deposit area of the application. When set to Disabled, any payments entered are collected into your default bank account and will need to be deposited. Note:

This field must be set to enabled if ePayments are enabled for your account. account. See the ePayments Settings section below for more information about ePayments.


02-18-10

Page | 9

Fi el d

D escription

Enforce Defa ult B ank Account

This option, when set to yes enforces the default bank account that is set on the Portfolio page. When payments are received and bills are paid, the default bank account is automatically chosen as the bank account for those transactions. S hould

a user select another bank account for the transaction, Propertyware will prevent them from using it. NSF R echa rge Date

When an NSF is processed the unpaid charge can display either the original date or date the N SF was processed. If you want to maintain the original charge date, select Date of Original Charge. If you want the charge date to show the date the N SF was processed, select Date of N SF.

App ly P aym ent Orde r

The applied payment order allows you to designate how payments should be applied applied to unpaid charges. For example, you might prefer to always apply a payment first to any outstanding late fee charges and then to rent. This feature is especially helpful when using Money In | Quick Collect or our check scanning solution. The default value is Rent, meaning that Propertyware applies payments starting with the oldest rent charge.

Auto Cal cu lat e Lat e Fees Night ly

S et

to Yes to have late fees calculated automatically each night. S et

to No to post late fees by runn ing the Late Fee Calculator.


02-18-10

Page | 10

Fi el d

D escription

En able Auto-Journal Entri es

S et

to "Yes" if you would li ke to be able to create recurring journal entries on on tenant leases. When set to to "Yes," the "Auto Journal Entries" section appears on Lease Summary pages so that you can create recurring journal entries. S et

to "No" if you do not have a need to create recurring journal entries on leases. When set to "No," the "Auto "Auto Journal Entries" section does not appear on the Lease S ummary page. Print Che cks Te mplate

S elect

a template from a number of predefined Deluxe check stock to be used when printing checks from Propertyware. An image of the check template selected appears at the bottom of the page.

Print Che ck Options

S elect

the fields you would like to print on your checks. Options include Company Info, Bank Info, Check Number, Signature Line and MICR Line. Note:

Selecting or deselecting these options has no impact on the Sample Check Image displayed displa yed at the bottom of the page.

Important CON SIDERATION S WHEN SETTING POST AUTO CHARGES AND AUTO APPLY PREPAYMENT T O RENT To ensure rent income is recorded in the month that it is being charged, you will need to configure Post Auto Ch arg e s and Auto Apply Pr epayments to R e nt in one of the following ways: Option 1: Set Post Auto Ch arges to "0." Propertyware will post auto charges to tenant ledgers on the first day of the month. In addition, if you have have Auto Apply Prepaym ents to Rent set to "Yes," prepayments will automatically apply in the current month. N ote: With this option, option, auto charges will not post to tenant ledgers prior prior to the month in which they are being b eing charged. Option 2: Set Post Auto Charges to any number of days prior to the first of the month that works for your company (but do NOT choose "0") and set Auto Apply Pr epayments to Rent to "No". Propertyware Administrator Guide

02-18-10

Page | 11

N ote:

With this option, auto charges charges will post to tenant ledgers prior to the first of the month but prepayments will will not automatically automatically apply to rent charges. You will need to manually apply any prepayments.

ePayment Settings The ePayment Settings section is where you can get more information about ePayments or view existing settings if your ePayments has already been enabled.

For those who have not yet enabled ePayments, if you would like more information, you can download a brochure and watch a demo video from the ePayment S ettings page. When you are ready ready to get started started with ePayments, you can download the required application forms from this page as well. Propertywares ePayment module is tightly integrated with the Leases and Management module; the ePayment feature enables:  Tenants or home owners to to view view their ledgers online.  Tenants to make secure payments via eChecks (ACH) or credit cards.  Property Managers Managers to pay owner draws via eChecks (ACH) Propertyware's ePayments module allows you to offer tenants and home owners the option to view their outstanding balances and make payments online using a variety of payment types including credit/debit cards and automatic debit from a bank account. In addition, you can accept electronic electronic payments over the phone or onsite by entering ePayment information directly onto tenant leases. Further, you can pass on any fees associated with processing electronic payments to your tenants or home owners in the form of a convenience fee. For existing ePayment customers, this is where you can view and update your ePayment settings. From this page you can:  Designate a notification email account to receive updates regarding processed, pending pending and failed electronic payment transactions.  View your ePayment account settings including including the the source key and pin. The source key and pin fields are entered by Propertyware when your ePayment account is enabled. Propertyware Administrator Guide

02-18-10

Page | 12

 View the bank account that is associated with your ePayment services.  Configure any convenience convenience fees you would like to pass on to your your tenants and/or home owners for using the ePayment option. This convenience fee may be set identically for all portfolios or customized for each individual portfolio.  S etup different settlement bank accounts where you would like cleared electronic payments to be deposited. This is a useful feature for property managers maintaining multiple bank accounts.  Enter an application fee to be charged to those who apply apply online via via your Propertyware Propertyware website. To make any changes to these settings click the Edit S ettings button. Once you have entered or modified your ePayment S ettings, click the Save button. The following is a description of the ePayment Settings fields. Fi el d e Paym ent S ettings Notification Ema il

ACH and Cr e dit Card S ettings Source Key and Pin

D escription

Enter the email address of the contact or mailbox where you would like to receive the ePayment notification email. An email is sent whenever an ePayment is approved or declined.

Once the Propertyware ePayment module has been enabled on your account, you will receive an email with a S ource Key and PIN to activate these services. This information must be entered accurately for the ePayments module to process ACH and credit card transactions properly. Note:

In most cases, this information may be entered for you by Propertyware. D efa ult S ett leme nt Account

S elect

the appropriate bank account which your ePayments account will fund when the electronic transactions are cleared. This is the bank account where all electronic payments will be directly deposited.

Note:

In most cases, this information may be entered for you by Propertyware.


02-18-10

Page | 13

Fi el d

D escription

Convenience Fee s Glo bal Settings ACH Conv e nience Fee

Enter the convenience fee that you would like to pass on to tenants or home owners who elect to pay with a direct deposit (eCheck / ACH) from their bank account. This additional fee will be displayed to them when they make their payment online through the tenant portal and requires their approval. You can also designate the appropriate income account that you would like to use for this convenience fee by selecting an account from the adjacent drop-down menu. Note:

You can setup an ACH ACH convenience fee for all your portfolios or customize it for each individual portfolio. portfolio. If you would like to set the same sa me ACH convenience fee for all your portfolios, click the Set for all link in this field. Alternatively, enter the appropriate ACH convenience fee for each portfolio displayed in the table under Portfolio Settings. Cr e dit Card Convenience Fee

Enter the convenience fee that you would like to pass on to tenants or home owners who elect to pay with a credit card. This additional fee will will be displayed to them when they make their payment online through the tenant portal and requires their approval. You can also designate the appropriate income account that you would like to use for this convenience fee by selecting an account from the adjacent drop-down menu. Note:

You can setup a credit card convenience fee for all your portfolios or customize it for each individual portfolio. If you would like to set the same credit card convenience fee for all your portfolios, p ortfolios, click the Set for all link in this field. Alternatively, enter the appropriate appropriate credit card convenience fee for each ea ch portfolio displayed in


02-18-10

Page | 14

Fi el d

D escription

the table under Portfolio Settings. Visa, MasterCard, AMEX and Discover all mandate that property managers charge a flat fla t fee when passing on a convenience fee, rather than a percentage p ercentage of the total amount. If this presents a problem for your business, we encourage you to set a credit card conve nience fee that is unique to each portfolio. Portfolio S ettings

De stination Bank Account

In this section, you can configure different ACH settings for each of your portfolios and designate different bank accounts for processed electronic payments for each portfolio. When this option is set, the sum of all electronic payments that have cleared will be moved via a journal entry to the designated destination bank account. This journal entry can then be viewed from the Owner Ledger located on the Summary page of the Management module. Note:

In order for the money money to be moved to the destination bank account, verify that the bank ba nk account holders tax ID has been entered for the destination bank account. (Refer to the Chart of Accounts section under Customize in this guide for more information on bank accounts.) App lica tion F ee s App lica tion F ee Amount

If you allow prospective tenants t o pay for applications fees through the ePayment option, enter the application fee amount and the account to which the application fees should be posted.

Manage Users In the Manage Users section you can create, edit and delete user accounts and profiles. Cr ea ting New User Accounts

1

Expand the Administration Setup section within Setup.


02-18-10

Page | 15

2 3 4 5

Click on Ma nage Users. Click on User Accounts. Click on the New User button at the top of the User Accounts page. Complete the field entries for the new user as follows:

Fi el d

D escription

Profile

Click the drop-down arrow to select a user profile appropriate for the user.

St atus

Accept the default value of Active when creating a new user account. Set to Inactive when closing a user account.

Privile ge Level

Accept the default value of Normal User for most users. Select Administrator only for those users who should have full administrative rights to your Propertyware account.

First Name

Enter users first name.

La st N a me

Enter users last name.

Em ail

Enter users email address name. The email address entered will be the users Propertyware Propertyware login account name.

Compa ny

This value defaults to the name of the management company that was entered when the Propertyware Propertyware account account was was set up. Accept this value when creating accounts for users who work for your company or enter in the name of the company when creating accounts for other users.

Work Phone

This value defaults to the phone number for the management company that was entered when the Propertyware account account was set up. Accept this value or enter a different phone number.


02-18-10

Page | 16

Fi el d

D escription

Hom e Phone

Optionally enter in the users home phone number.

Mob ile Phone

Optionally enter in the users mobile phone number.

BCC Me on S ent Em ails

Accept the default value of Yes to have the user blind copied on all emails that he or she sends through Propertyware. Select No if the user does not want to receive blind copies of any emails he or she sends.

Rep ly To Em a il

Enter an email address where you wish to have delivered any replies to emails that are sent from this user.

Addr ess & Address (Cont.)

This value defaults to the address of the management company that was entered when the Propertyware account account was set up. Accept this value when creating accounts for users who work for your company or enter in an owners address when creating user accounts for owners.

City

This value defaults to the city of the management company that was entered when the Propertyware account was was set up. Accept this value or enter a different city as appropriate for the user account.

Zip

This value defaults to the Zip code of the management company that was entered when the Propertyware account account was set up. Accept this value or enter a Zip code as appropriate for the user account.

Country

This value defaults to the country of the management company that was entered when the Propertyware account account was set up. Accept this value or enter a different country.


02-18-10

Page | 17

Fi el d

D escription

Fax

This value defaults to the fax number of the management company that was entered when the Propertyware account account was set up. Accept this value or enter a fax number as appropriate for the user account.

Pa ger

Optionally enter the users page number.

Rece ive Lea sing A le rts

Accept the default value of Yes if you want this user to receive receive all leasing alerts. alerts. Leasing alerts will be sent to the email address indicated under Alert Email or to the users email address if no email address is indicated for Alert Email. Select No if you do not want this user to receive leasing alerts.

Rece ive Ma int ena nce Alerts

Accept the default value of Yes if you want this user to receive all maintenance alerts. Maintenance alerts will be sent to the email address indicated under Alert Email or to the users email address if no email address is indicated for Alert Email. Select No if you do not want this user to receive maintenance alerts.

Alert Ema il

Enter an email address where the user would like to receive alerts if different from the email address indicated in the Email field.

Time Zone

S elect

the time zone for the users from the dropdown menu.

Em ail Signatur e

Create an email signature for the user that will be used when emails are sent through Propertyware.

Pa ss word or d

Enter the password for the user or optionally click the box for Auto Generate to have the system create the password.


02-18-10

Page | 18

6

Fi el d

D escription

Confirm Pass word

Re-enter the users password. Click the box for S end User Login info by email to have the system notify the user when his or her Propertyware account has been created.

Once you have created the new user account, click the Save button.

Editing Us er Accounts

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Accounts. To edit a user account, select the Edit link in the Action column for the user account you want to edit. Modify the fields as necessary and when finished click the Save button.

D ele ting Us er Accounts The delete function can be used if a user account was created in error, or when an account was created that was never used and is not needed.

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Accounts. To delete a user account, select the Del link in the Action column for the user account you want to delete. Click the OK button in the confirmation window to delete the account.

Warning Accounts for users who have performed functions in Propertyware should not be deleted. These accounts should be deactivated instead. D ea ctivating User Accounts Propertyware keeps track of all user activity within within the application. Therefore, accounts for users who have performed functions in Propertyware should not be deleted, but "deactivated"


02-18-10

Page | 19

instead. Once user accounts are deactivated, the users associated with those accounts accounts will be prohibited from logging into Propertyware but their history within the application is maintained.

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Accounts. To inactivate a user account, select the Edit link in the Action column for the user account you want to edit. Change the Status field to Inactive and click the Save button.

Se tting User R estrictions When you create user accounts with a privilege level of normal you may further restrict those user accounts from accessing certain portfolios, properties within portfolios and bank accounts. By default, no restrictions are set when a new user account is created. To set a restriction for a user, perform the following steps:

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Accounts. S elect

the S et Restrictions link in the Restrictions column for the user account on which you want to set restrictions. The restrictions page is displayed for the the user.

Under the Portfolio/Building Restrictions section, select only those Portfolios or Properties to which the user should have access. Note: If nothing is checked, the user has access to all portfolios and all properties. properties. If one portfolio is checked, the user will have access to just that one p ortfolio.

a When selecting a portfolio, you may optionally select All Buildings within the portfolio or just selected buildings by clicking on the Selected Buildings radio button and selecting only those properties to which the user should have access.

6

Under the Bank Account Restrictions section, select only those bank accounts to which the user should have access. Note: If nothing is checked, the user has access a ccess to all bank accounts. If one bank account is checked, checked, the user will have access to to just that one bank account.

7

Click the Save button.

Use r Profile s User Profiles ensure that a group of users has the same level of access to the application. There is no limit to the number of users that may be assigned to the same profile, or to the number of profiles you can create. Within profiles you can create a series of user restrictions that


02-18-10

Page | 20

apply to everyone assigned to that profile. If you do not create any user profiles, profiles, all users will be assigned to the Administrative Administrative Profile. If you set restrictions on this profile, those restrictions will apply to all users assigned to that profile. For this reason, we recommend that you do do not modify the Administrative Profile and instead create additional profiles and set restrictions on those profiles. Use r Profile Restrictions User Profiles can be used to restrict all users assigned to the same user profile from accessing certain areas of the application, including entire modules (denoted by tabs across the top of the Propertyware screen), from modifying data within particular modules to which they do have access (referred to as Read-Only access), or limiting functionality in modules to which they do have access.

You can set the following restrictions on a profile:  Restrict access access to application modules. The module tabs will will not not appear within within the the application.  Read Only Access.  Restrict functionality within certain modules of the application. Cr ea ting Use r Profiles

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Profile s. Click on the New User Profile button at the top of the User Profiles page. Complete the field entries for the user profile as follows:

Fi el d

D escription

Profile Name

Enter a name for the new profile. The user profile name should reflect the nature of the profile, such as Property Manager or Owner Profile.


02-18-10

Page | 21

Fi el d

D escription

Module Se ttings

This is where you can restrict users assigned to a profile from having access to specific Propertyware modules and editing capabilities. The default setting for all modules is On. If you do not want users assigned to a profile to have access to a specific module, change the setting to "Off." When "Off" is selected selected for a module, module, the tab for that module will not be visible to users assigned to that profile when they log into Propertyware. Note that some modules have additional features that are selected by default as noted by the checkmarks. Removing these checkmarks allow you to restrict changes to a specific section within the module.

Rea d-Only S ettings

6

This is where you can restrict users assigned to a profile to read-only read-only access only. The default setting is full access. If you do not want users for for a profile to have full access to any of the features in this section, change the setting from Full Access to Read Only.

Once you have created the user profile click the Sav e button.

Assigning Users to a Profile

1 2 3 4 5 6

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Profile s. Click on the Assign Users link of the profile to which you want to assign users. S elect

the users from the Assign Users page.


Editing Us er Profile s

1 2

Expand the Administration Setup section within Setup. Click on Ma nage Users.


02-18-10

Page | 22

3 4

Click on User Profile s.

5 6

Modify the fields as necessary.

To edit a user profile, select the Edit link in the Action column for the profile you want to edit.


D ele ting Us er Profile s

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Users. Click on User Profile s. To delete a user profile, select the Del link in the Action column for the profile you want to delete. Click on the OK button in the confirmation window to delete the account.

Note:

Any users assigned to a profile that that is deleted will be reassigned reassigned to the Administrative Profile Profile as a Normal user.

Manage Customers In the Manage Customers section, you can create, edit or delete Other Customers. Propertyware considers those entities or customers that generate income from sources other than leases as Other Customers. Examples of income from other customers would be vending machine income or money received from common area laundry facilities (i.e., coin-operated washers and dryers). (Payments from Other Customers can be viewed in Money In by clicking on the Other Customers page view from the Sidebar. Cr ea ting New Oth er Customers

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Custom ers . A list of active Other Customers Customers displays in the Other Other Customers section. Click on the New Customer button. The New Customer page displays. Complete the information on this page. The only required fields are the first and last name.


02-18-10

Page | 23

6

Click the Save button. The new customer will now appear under Other Customers in the Money In module.

Editing Othe r Customers

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Ma nage Custom ers . A list of active Other Customers displays in the Other Customers section. From the Action column click on the Edit link of the Other Customer you want to edit. Modify the fields as necessary. Click the Save button.

D ele ting Oth er Customers

6 7 8 9

Expand the Administration Setup section within Setup. Click on Ma nage Custom ers . A list of active Other Customers Customers displays. From the Action column click on the Del link of the Other Customer you want to delete. At the Are you Sure? prompt, select the OK button.

Note:

You can only delete a customer from which you have not received any payments through Money In.

Tenant Screening You must sign up in order to use Propertywares Tenant Screening feature. If you would like more information, please contact [email protected].

Tenant Screening allows you to screen prospects created from the Marketing module in realtime to determine their credit worthiness. Once you enable the Tenant Screening feature within your Propertyware account, you can then run this feature on new prospects you create manually in the Marketing module or those prospects that submit applications directly from your Propertyware portal. To facilitate your obtaining a screening report for an applicant, Propertywares Marketing module has been integrated with a screening provider to allow one click transfer of an applicants information over a secure secure connection. This service will be charged by Propertyware and can be set up to charge your existing billing account, a separate billing account or prompt you to enter credit card information each time you screen a prospect. Propertyware Administrator Guide

02-18-10

Page | 24

Once you have received your account username and password for the Propertyware Screening module you will be able to e dit the Tenant Screening Settings page.

1 2 3 4 5

Expand the Administration Setup section within Setup. Click on Te na nt Scree nings. Your current Tenant Screening settings are displayed. Click the Edit Se ttings button. Edit the following fields as appropriate. Fi el d

D escription

Scr ee ning Typ e

Click the drop-down arrow to select Credit Retriever or Smart Move.

M embe r N a me

Visible only if Credit Retriever is selected as the Screening Type. This is the user name you were were given when your account was activated.

P ass word

Visible only if Credit Retriever is selected as the Screening Type. This is the password you you were given when your account was activated.

Bi ll ing Mode

6

You have three billing choices for the screening service charges: 1 Use my subscription billing information. This option uses the same billing information on file for your Propertyware subscription. 2 Use a different credit card. This option allows you to enter information for a credit card you would like to use for screening service charges. 3 Ask for billing information each time. This option will prompt you to enter a fo rm a payment each time you attempt a ttempt to screen your prospect.

Once your Tenants Screening Settings are complete, click the Save button.


02-18-10

Page | 25

Billing In the Billing section, you can view and modify your Propertyware subscription plan options and billing information. Plan options include your maximum number of units, storage capacity, and add-on modules to which you have subscribed.

Plan Options If you have not yet converted your free trial account to a subscribed account this is where you can do so. If you have a trial account, when you access access this page, a reminder notice indicates when your free trial will expire. Fi el d

D escription

M aximum # of Units

For new accounts, this is where you select the number of units and corresponding monthly charge. For existing accounts, you can view your current option and pricing information. To adjust your subscription, select select the desired number of units from the drop-down menu. Make any additional desired changes on this page and then click the Continue button at the bottom of the page.

Stor age

You can view or adjust the amount of your disk storage in this section. By default, there is no charge for up to 500 MB of data data storage. If you wish to to increase the amount of storage, select the desired amount of storage from the drop-down drop-down menu. Make any additional additional desired changes on this page and then click the Continue button at the bottom of the page.

Pr emium Add-On Modu le s

Available Premium Add-On Modules and pricing are described in this section. To activate a module check the the box next to the applicable module. module. Make any additional desired changes on this page and then click the Continue button at the bottom of the page.


02-18-10

Page | 26

Billing Information In the Billing Information section, users will be able to view and edit the current payment method for their Propertyware account.


02-18-10

Page | 27

Security Settings In the S ecurity Settings section, you can create a whitelist of IP addresses from which users can access your Propertyware account. Be aware that creating a whitelist prevents users from accessing your Propertyware account unless they are accessing it from an IP address specified in the IP Whitelist. Note:

If you plan on creating creating a whitelist of IP addresses always enter an IP address for you, the administrator first, to prevent yourself from being locked out of of Propertyware. If you first enter an IP address to which you do not n ot have access, you would be prevented fr om accessing your Propertyware account except from a computer associated with an IP addre sse entered in the whitelist.

Adding an Allowed IP Address

1Expand the Security Settings section within Setup. 2 Click on IP Whitel ist. 3 The IP Whitelist page displays showing a listing of all allowed IP addresses.

If no IP addresses have been entered, the phrase No Restrictions will be shown. Click on the Add N ew All owed IP Addr ess button.

4

In the New Allowed IP box enter a description and a valid IP address in dot-decimal format. Note: The IP address may include the *  * wildcard character.

5 6

Click the Save button. Repeat the process for each IP address to be listed.

Note:

Once an IP address has been saved, it it cannot be edited, and can only only be deleted. Therefore, if an incorrect IP address was saved, you will have to delete that IP address and recreate with the correct IP address.

Deleting an Allowed IP Address

1Expand the Security Settings section within Setup. 2 Click on IP Whitel ist. 3 The IP Whitelist displays showing a listing of all allowed IP addresses. 4 Locate the IP Address to be deleted by Description or IP Address and select the Del link in the Action column.


02-18-10

Page | 28

Activity Logs In the Activity Logs section, you can view activity related to logins by users of your Propertyware account. If you are using Propertyware S ync for QuickBooks you can view a log of syncs that have been performed between the two applications.

Displaying a History of User Logins

1 2 3 4

Expand the Activity Logs section within Setup. Click on Login History. A list displays with users email addresses (i.e., Propertyware user account), full names and login dates and times. By default, the last 20 logins will be displayed displayed on the page. To display a listing greater than 20, click on the drop-down menu next to to Display Last and select 50, 100 or higher.

Displaying a History of QuickBook Syncs

1 2 3

Expand the Activity Logs section within Setup. Click on Sync History. A list displays with your recent QuickBooks sync history.


02-18-10

Page | 29

Customiz e In the Customize section you can customize how Propertyware Propertyware works. Items that can be customized include Alerts & Email, Events, Chart of Accounts, Custom Fields, QuickBooks, Leases, Maintenance, Management, Marketing, Properties, Vendors and Task Lists.

Ale rts & Em ail Alerts are a method by which Propertyware communicates  via email  to your users, tenants and owners. There are two types of alerts, real-time and and scheduled. A real-time alert is triggered each time a specific action occurs such as whenever a new work order or new prospect record is created. A scheduled alert occurs at a particular time prior to or after the actual occurrence of an event such as tenant move ins and move outs or when lease charges remain unpaid after their due date. Use r A lerts In the User Alerts section, you can specify which users should receive alerts and what type of alerts they should receive. The type of alerts available include Leasing, Maintenance, Tenant and Owner Portal, Lead (Marketing) and Building/Unit alerts.

When working within Propertyware, alerts are indicated by a flashing red flag located at the top right corner of the application. By clicking on the Alerts link next to the flag, you can view all alerts. Once the alerts have been deleted, the flag will no longer appear. Lease Alerts: Lease alerts may be set to notify specified specified users of important lease dates and events. Listed below are descriptions of the lease lease alerts available in Propertyware. Lea se Ale rt

D escription

St art D a te

This alert is sent to specified users on a set number of days before the start date of a new lease.

End D ate

This alert is sent to specified users on a set number of days before the end date of a lease.


02-18-10

Page | 30

Lea se Ale rt

D escription

Sch edu led Move Out Date

This alert is sent to specified users on a set number of days before the scheduled move out date of a lease.

Auto Charge Start

This alert is sent to specified users on a set number of days prior to a new auto charge taking effect on a lease. This alert can help you to avoid collection mistakes resulting from missed rent increases.

Auto Charge End

This alert is sent to specified users on a set number of days prior to the expiration of an existing auto charge.

Unp aid Cha rge s

This alert is sent to specified users on a set number of days after a lease charge is past due.

Maintenance Alerts: Maintenance alerts may be set to notify notify specified users of important maintenance events such as incoming service requests requests and work orders. Listed below are descriptions of the maintenance alerts available in Propertyware. M aint enanc e A lert

D escription

N ew Servic e Req ue st

This real-time alert is sent to users whenever a new service request is created, either by a tenant from the tenant portal, or directly within Propertyware.

Work Order Cr eat ed

This real-time alert is sent to users whenever a new work order is created within Propertyware.

Work Order Approved

This real-time alert is sent to specified users whenever a work order is approved.

Work Order Ch ang ed

This real-time alert is sent to specified users whenever a work order is changed.

Tenant Portal Alerts: Tenant portal alerts are real-time real-time alerts that may be sent to notify specified users of events occurring on your tenant portal. Listed below are descriptions of the tenant tenant portal alerts available in Propertyware. Propertyware Administrator Guide

02-18-10

Page | 31

Te nant Portal Alert

D escription

Te nant Portal Login Req ue st A le rt

This alert is sent to the specified users when a tenant requests a portal login login and his or her email address is not recognized by Propertyware.

Te nant Informa tion Updat ed

This alert is sent to the specified users when a tenant updates his/her account information from the tenant portal.

Te nant P aym ent M a de

This alert is sent to the specified users when a tenant makes a payment from the tenant portal.

Te nant G ave Notice

This alert is sent to the specified users when a tenant gives notice from the tenant portal.

Te nant Signe d Up For Auto

This alert is sent to the specified users when a tenant signs up for auto payments from the tenant portal.

P ayme nts Te nant Cr ea te d An Account

This alert is sent to the specified users when a tenant creates a tenant portal account. Propertyware must recognize the tenant's email address for this to occur.

Lead Alerts: Lead (or marketing) alerts are real-time alerts that may be sent to notify specified users of events occurring within the Marketing module of Propertyware or from your Propertyware website. Listed below are descriptions of the lead alerts available in Propertyware. Lea d A le rt

D escription

N ew Prospect

This alert is sent to the specified users when a new prospect is created.

Conta ct Agent

This alert is sent to the specified users when Contact Agent is submitted.

Conta ct Us

This alert is sent to the specified users when Contact Us is submitted.

N ew App licant

This alert is sent to the specified users when a prospect completes your online application form.


02-18-10

Page | 32

Owner Portal Alerts: Owner portal alerts are real-time alerts that may be sent to notify specified specified users of events occurring within your owner portal. Listed below are descriptions of the owner portal alerts available in Propertyware. Owner Portal Ale rt

D escription

Owner Portal Login Req ue st

This alert is sent to the specified users when an owner requests a portal login login and his or her email address is not recognized by Propertyware.

Owner M a de Contribution

This alert is sent to the specified users when an owner makes a contribution from the owner portal.

Owner Work Ord er A le rt

This alert is sent to the specified users when an owner approves or rejects a work order from the owner portal.

Building/Unit Alerts: Building/Unit alerts are real-time alerts that may be be sent to notify specified users of changes to buildings and units within a portfolio. portfolio. Listed below are descriptions of the building/unit alerts available in Propertyware. Ale rt

D escription

Bui lding/Unit Cr eat ed

This alert is sent to the specified users when a building or unit is created or when a building is reassigned to a different portfolio.

Te nant Notifications

Tenant notifications are emails that may be sent to your tenants that relate to specific events. An example of a tenant notification is an email sent to tenants whenever a payment has been received. Listed below are descriptions of the tenant notifications available in Propertyware. Te nant Notification

D escription

P ayme nt R eceipt

This real-time notification is sent to tenants whenever a payment is received.


02-18-10

Page | 33

Te nant Notification

D escription

App lica tion F ee Pa id Online

This real-time notification is sent to tenants whenever an application fee is paid online.

Notice to V acate Confirmation

This real-time notification is sent to tenants whenever a notice to vacate as been received.

Auto ePayme nt Cr eat ed Confirmation

This real-time notification is sent to tenants whenever an auto ePayment is created.

Auto ePayme nt Process ed

This real-time notification is sent to tenants whenever an auto ePayment is processed.

Cha rges Posted to Te nant L e dg er

This real-time notification is sent to tenants whenever charges are posted to their ledger.

S ervice Req uest Crea ted Confirmation

This real-time notification is sent to the tenants when a service request is created.

S ervice Req uest C losed

This real-time notification is sent to tenants whenever a service request is closed.

Document Publ ish e d to Portal

This real-time notification is sent to the tenants whenever documents are published to your tenant portal.

Community M essa ge Posted to Portal

This real-time notification is sent to tenants whenever a community message is posted to your tenant portal.

Owner Notifications Owner notifications are emails sent to your owners that that relate to specific events. An example of an owner notification is an email sent to owners whenever a report has been published to the owner portal.

Listed below are descriptions of the owner notifications available in Propertyware. Propertyware. Owner Notification

D escription

60 Day Notice of L ea se Expir a tion

This notification is sent to owners 60 days before the expiration of a lease.


02-18-10

Page | 34

Owner Notification

D escription

M aint enanc e Req ue st

This real-time notification is sent to owners whenever a maintenance request is received.

D eposit to Account

This real-time notification is sent to owners whenever a deposit to their account is received.

Te nant P aym ent R e ce ive d

This real-time alert is sent to owners whenever a tenant payment is received.

3 D ay P a st Du e Rent Posting

This alert is sent to owners whenever a 3-day past due rent posting is received.

Insufficient Funds R eceive d

This real-time alert is sent to owners whenever a payment made by check is changed to NSF.

45 D ay L ea se Expir ation

This alert is sent to owners 45 days prior to the expiration of a lease.

30 Day Notice To V a ca te Rece ived

This alert is sent to owners whenever a tenant submits a notice to vacate

Va cancy

This alert is sent to owners on the day a lease ends.

Lea se Renewal

This real-time alert is sent to owners whenever a lease is renewed.

N ew Te nant Origina tion

This real-time alert is sent to owners whenever a new tenant has been created.

Se tting Up or Editing A lerts

1 2 3 4 5

Expand the Customize section within Setup. Expand Ale rts . Click on User A lerts . The Alerts page displays with alerts grouped by category. Locate the alert type you would like to set up or edit and click the Edit link in the Action column. The Edit Alert box opens.

a For scheduled alerts, enter or edit the number of Days Before (or After) setting.

6

Change or accept the Reply To email address. This email address is where you would like replies to email alerts be sent. To illustrate, lets say that that you set up a maintenance alert


02-18-10

Page | 35

to be sent to your property property manager whenever a work order is created. If, upon receipt of that work order, your property manager replies to that email, the email address specified in Reply To is where his or her email reply will be sent.

7

Change or accept the subject line. The subject line defaults to your Propertyware Propertyware account name with a description of the alert type.

8

Check the boxes next to the roles to send an alert to everyone associated with those roles. To send to specific specific users, check the box next to Specified Users. This will will display a list of all current users. Select those users from the list who should receive the alert.

9 Optionally enter email addresses in the CC: and/or BCC: sections. 10 Click the Save button. Important You can also set up Leasing and Maintenance alerts when creating user accounts. See the Manage Users section of this reference guide for more information about creating user accounts.

View ing a nd Te sting A lerts The View link displays detail information about an alert. Information includes the name of the alert, the area (or category) in which the alert is grouped, the type of alert (whether real-time or scheduled), the users or user profiles specified to receive the alert, and a description of the alert.

The Test link allows you to test test an alert. Clicking on this link brings up the Test Test Alert box with an email address pre-filled in. This default email address address is the email address you you specified in your administrator user account. You can specify specify an alternate alternate email address if you wish. However, it is important to note that the test email is not sent to individuals you have specified to receive an actual alert.

Important In order for users associated with a role to receive alerts, they must be added to the building as a Property Manager, a Leasing Agent or a Maintenance Manager. This is done from the Properties module by editing the Building page. Roles are not the same as any user profiles that may have been created with the same name. The only exception is that of Admins which applies to user accounts created with with a privilege level of Administrator. Propertyware Administrator Guide

02-18-10

Page | 36

Events Users can create events on their dashboard selecting from a number of predefined event types. If you would like to create create additional event types, you can do so in this section. Creating event types in this location adds them to the list of event types that users can select when creating an event on their Dashboard. Cr ea ting New Event Typ es

1 2 3 4 5

Expand the Customize section within Setup. Click on Events . The Event Typ es page displays. Click on the New Typ e button. Enter a name for the event type. Click the Save button.

Charts Propertyware provides you with a list of default accounts in your Chart of Accounts. Additionally, you can create more accounts. Below is a list of account account types with examples of each type. The following table describes each type of account that can be added to your chart of accounts:

Default Accounts and E xa mp les Account Type

Ba nk

Account Type D escription

This type identifies your bank accounts. At a minimum, you should have an account set up for every actual bank account that you use for property management.


Account Num be r

Account N ame

1000

Op era ting Account

De scription

The standard bank account for tracking income and expenses. If your your business only uses one bank account for managing its properties, the description for this account can be edited to reflect the name of your bank.

02-18-10

Page | 37


Ass et


This type identifies accounts used for any asset that is neither a current asset nor a fixed asset, such as long-term notes


Account Num be r

Account N ame

1020

P etty Ca sh

Petty cash is the money you use for small, businessrelated expenses (usually less than $100). You might keep this money in a cash register drawer in the management office. You can decide whether or not you want to track your petty cash expenses in Propertyware and QuickBooks.

P aym ents

The default account used by Propertyware for all payments recorded. The Payments account is the equivalent of the Account Receivables account in QuickBooks.

1100

De scription

02-18-10

Page | 38


Liab ility


Account Num be r

Account N ame

De scription

receivable.

1150

Und eposite d Funds

An account in which you record payments (rather than a bank account such as 1000 - Operating) when you have not yet determined which bank account the funds will be deposited. Payments recorded to this account can then be moved to a bank deposit which can be closed and transferred to QuickBooks.

This type identifies accounts used for liabilities such as security deposits or pet deposits.

2010

Security D eposit

The account used to track all security deposits charged and collected.

2015

P et D eposit

The account used to track all pet deposits charged and collected.

2025

Pr epaym ent Re fund

The account used when refunding a prepayment to a tenant.

2030

Security D eposit Adjustment

The account used to reflect the interest earned for a security deposit held.

2040

Security D eposit Re fund

The account used when refunding a security deposit to a tenant.


02-18-10

Page | 39


Eq uity

Income


Account Num be r

Account N ame

De scription

This type identifies your owners' equity accounts (i.e., owner contribution accounts and owner draw accounts).

3020

Ow ne r Contribution

This account is used by companies that manage properties for various owners. The owner contribution account tracks all money received from owners.

3030

Owner Dr aw

This account is used by companies that manage properties for various owners. The Owner Contribution account tracks all money paid out to owners.

This type identifies all income accounts, both for income received by your company and income generated by the portfolios you manage.

4000

Rent

This account is used to track all rent charges on the various tenant ledgers.

4010

M ana gement Income

This account is used by companies that manage properties for various owners to track management fee income.

4200

App lica tion Fee

This account is used to track application fees charged to a new tenant during the screening or move in process.


02-18-10

Page | 40




Account Num be r

Account N ame

De scription

4220

Common Ar ea M aint enanc e

This account is used primarily for commercial properties to charge tenants their prorata share of common area maintenance (CAM) expenses.

4230

Discount / Promotion

This account is used to track any discounts and/or promotions on tenant ledgers. All discounts and promotions are a negative charge to an income account.

4340

La te Fee

This account is used to track all late fees charges on tenant ledgers.

4460

F ee for Bounced Check

This account is used to track all fees charged on tenant ledgers for those payments returned for Non Sufficient Funds (N SF).

4500

Op ening Bala nce

This account is used primarily by new Propertyware customers to track the opening balances owed by their tenants when first using the application.

02-18-10

Page | 41




Account Num be r

Account N ame

De scription

4560

Refunds

This account is used to track all refunds paid to tenants from the tenant ledger or during the move out process.

4600

Security D eposit Forfeit

This account is used to track all forfeited security deposits i.e., security deposits not returned to the tenant.

4680

Uti lity Ch arge

This account is used to track all utility charges (i.e. water, electricity, etc.) on the various tenant ledgers.

4700

Sale s Tax Du e

This account is used to track any sales tax charges on tenant ledgers. This account is also used by Propertyware to automatically create the appropriate sales tax charges for any new accounts created that are designated as "taxable."

4900

Adjustment

This account is used to track all general adjustments (i.e. a negative amount to adjust the amount owed by a tenant) on the various tenant ledgers.

02-18-10

Page | 42


Expe nse


This type identifies all expense accounts, both for expenses incurred by your management company and attributable to the portfolios you manage.


Account Num be r

Account N ame

De scription

5010

Adv ertising

This account is used to track expenses related to advertising.

5020

Auto and Travel

This account is used to track expenses related to travel.

5030

Clea ning and M aint enanc e

This account is used to track expenses related to cleaning and maintenance.

5040

Commissions

This account is used to track expenses related to commissions.

5050

Insurance

This account is used to track expenses related to insurance.

5060

Legal a nd Oth er Professional F ee s

This account is used to track expenses related to legal and/or other professional services.

5070

M ana gement F ee s

This account is used to track the management fees charged to an owner's portfolio.

5080

Mortga ge

This account is used to track expenses related to general mortgages.

5090

Mortga ge Int erest

This account is used to track expenses related to mortgage interest. 02-18-10

Page | 43



Account Num be r

Account N ame

De scription

5100

Oth er Int erest

This account is used to track expenses related to other interest.

5200

Common Ar ea M aint enanc e

This account is used to track common area maintenance (CAM) expenses that your business pays prior to recovering the expenses from tenants.

5510

Repa irs

This account is used to track expenses related to general repairs.

5512

B a d Deb t / Unco lle ctable Mon ey

This account is used to track expenses related to bad debt resulting from uncollectible charges on tenant ledgers.

5515

Re pairs: Upgrades

This account is used to track expenses related to upgrades.

5530

Supp lies

This account is used to track expenses related to supplies.

5610

Tax Exp ense

This account is used to track expenses related to taxes.

5630

Uti lity Expens es

This account is used to track expenses related to utilities.

View ing th e Chart of Accounts


02-18-10

Page | 44

1 2 3

Expand the Customize section within Setup. Click on Chart of Accounts. The Chart of Accounts page displays with a list of all your accounts, whether bank, asset, liability, income or expense accounts. A description of of the column headings headings appears in the table below. Note: You can sort the Chart of Accounts list by clicking on on a column heading.

Fi el d N ame

D escription

Account #

This column displays the various account numbers. If you are synchronizing Propertyware Propertyware with QuickBooks, the account numbers entered here should match the corresponding account numbers in QuickBook's chart of accounts.


02-18-10

Page | 45

Fi el d N ame

D escription

Typ e

This column displays the various account types, which include:  B ank: This type identifies your bank accounts, i.e., operating accounts and security deposit bank accounts.  Cr edit Card: This type identifies credit card accounts.  Ass et: This type displays accounts used for any asset that is neither a current asset nor a fixed asset, such as longterm notes receivable.  Liab ility : This type identifies accounts used for liabilities such as security deposits to be paid over periods longer than one year.  Ca pit al : This type type identifies your your owners' capital accounts, i.e., owner contribution accounts and owner draw accounts.  Income: This type identifies all income accounts, both for income received by your company and income generated by the portfolios you manage.  Expense: This type identifies all expense accounts, both for expenses incurred by your management company and attributable to the portfolios you manage.

Acct Code

This column displays the account codes for each of your accounts. accounts. These account codes will display on Propertyware reports and throughout the application for purposes of identifying account types.


02-18-10

Page | 46

Fi el d N ame

D escription

De sc

This column displays a short description or identification tag for each account. If you are synchronizing Propertyware with QuickBooks, the descriptions entered here should match the corresponding account descriptions in QuickBooks' chart of accounts.

Discount

This column displays a Yes or No value indicating whether the account has been created as a discount discount account. The default discount/promotion account (4230) is an example of a discount account.

Rent

This column displays a Yes or No value indicating whether the account has been created as a rent account.

Escrow

This column displays a Yes or No value indicating whether the account has been created as an escrow account. The default security deposit account (2010) is an example of an escrow account.

Ex . L at e

This column displays Yes or No value indicating whether the account has been flagged to exclude from assessing late fees.

Taxable

This column displays a "Yes" or "No" value indicating whether an account has been marked taxable.

Action

In this column, you can edit and/or delete certain accounts. Accounts tied tied to logic within Propertyware cannot be deleted  these accounts do not have the the Del link. Likewise, you cannot delete an account to which transactions have been recorded. Although the Del link is present for these a ccounts, if you attempt to delete an account with transactions, Propertyware will notify you that the account cannot be deleted.


02-18-10

Page | 47

Cr ea ting New Accounts

1 2 3

Expand the Customize section within Setup. Click on Chart of Accounts. The Chart of Accounts Accounts page displays a list of all your your accounts. Click the New Account button. The New Account page opens. Fill out the fields on this page, per the information in the table below.

Fi el d N ame

D escription

Account Type

Choose from one of the following types of accounts:  Ba nk: Propertyware provides you you with a default bank account within your Chart of Accounts for the purpose of collecting tenant payments and paying bills. You can update this default bank account and add any additional bank accounts, whether at one or more financial institutions, used by your company to manage your properties.  Cr edit Card: Use this option to create a credit card account for tracking purchases made by credit card.  Ass et: Use this option option to create an asset account for any asset that is neither a current asset nor a fixed asset, such as longterm notes receivable.  Liab ility : Use this option option to create a liability account for each of your company's liabilities, such as security deposits or pet deposits.  Eq uity: Use this option option to create an an equity account for each owner for whom you manage properties.  Income: Use this option to create an income account both for income received by your company and income generated by the portfolios you manage.  Ex pense: Use this option to create an


02-18-10

Page | 48

Fi el d N ame

D escription

expense account to categorize all property expenditures. Parent

Choose a parent account if you want to create a sub-account. Note that the choices in this menu will be limited to include only accounts matching the Account Type selected above.

Account Number

Enter an account number for this account, or use the Auto Generate button to generate an Account Number. This field is limited to seven alpha-numeric characters. Note: This field syncs with the the account number in QuickBooks.

De scription

Enter a short description of the account in the description field. Note: If you you plan to synchronize Propertyware Propertyware with an existing QuickBooks file with a defined Chart of Accounts, this field should match the corresponding account name in QuickBooks.

Account Code

The Account Code field is automatically populated with a twelve character value for identifying the new account. This account code code is used on reports and elsewhere within the application to identify the the account. You can edit edit the auto generated account code or choose to keep the one created from the account description.

Tax Account

Checking this box will designate the account as a tax account, which allows you to then assign it to taxable items and charges.

Discount Account

Checking this box will designate the account as a discount account and will be recognized as a negative charge type when used as an auto charge or one-time charge on the tenant ledger.

Rent Account

Checking this box will designate the account as a rent account. All accounts with with this designation


02-18-10

Page | 49

Fi el d N ame

D escription

will be included in the total rent calculations on mail merge templates and reports. Escrow Account

Checking this box will designate the account as an escrow account. All accounts with this designation will be excluded from the portfolio balance, but can be viewed in the escrow balance on the Management Summary page and reports.

Exclude Late F ee

By selecting this option, you are designating that an account should be excluded from the late fee calculation.

Taxable

Av ailable to Income and E x pense a ccounts only. If you are creating an income or expense account you will have the option of marking the account as Taxable. This option is useful for accounts that require a separate charge associated with them for tax (i.e., sales tax or Canadian Goods and Services Tax). To set a tax on an income income or expense account, choose the type of tax and enter a Tax Rate that is greater than zero. Propertyware allows for up to 3 different tax accounts. If the tax account you would would like to select from the drop-down menu does not exist, you will have to create a new account and set that as a Tax Account. Account. It will then be available to select in the drop-down menu.

Sec. D eposit Account

Av ailable to Liab ility a ccounts only. If you are creating a Liability account, checking this box designates the account as a Security Deposit account. Tenant payments applied to security deposit charges will be maintained in the Deposits Held field on the Tenant Ledger. These funds will be available for refund, forfeit or applied to unpaid charges when the tenant moves out.

Card Numbe r

Av ailable to Credit Card accounts only. Enter the credit number into this field.


02-18-10

Page | 50

Fi el d N ame

D escription Ba nk Information Av ailable to B ank a ccounts only

4

Bank N a me

Enter the name of the bank where the account is located.

Bank Routing Numbe r

Enter the routing routing number for your your bank account. If you plan to print checks from Propertyware, this field is required to generate the MICR line.

Bank Account Numbe r

Enter the bank account number. If you plan plan to print checks from Propertyware, this field is required to generate the MICR line.

Bank Account Ho lder

Enter the name of the holder of the designated bank account. This fiel d is r equir ed for using the r everse ACH funding option of th e Prop erty wa re e Paym ents modu le .

Bank Account Ho lder Tax ID

Enter the tax ID of the holder of the designated bank account. This fiel d is r equir ed for using the r everse ACH funding option of th e Prop erty wa re e Paym ents modu le .

Bank Addr e ss & Bank Addr e ss 2

Enter the address where the bank account is located.

Bank City

Enter the city where the bank account is located.

Bank St ate/Province

Enter the state or province where the bank account is located.

Bank Zip /Postal Cod e

Enter the zip or postal code where the bank is located.

Bank Account Typ e

Select

either Checking or Savings Account.


Editing /Dea ctivating Accounts

1 2

Expand the Customize section within Setup. Click on Chart of Accounts.


02-18-10

Page | 51

3

The Chart of Accounts page displays a list of of all your accounts. Locate the account to be be edited or deactivated and click on the Edit link in the Action column.

4

Make any editing changes as necessary, or check the Deactivated box to deactivate the account.

5


Note:

When an account is deactivated, it will no longer be available when creating future transactions, however existing transactions associated with this account will remain intact. Pr eparing Your Chart of Accounts for Use with Sync for QuickBooks If you are planning to use the Propertyware Sync for QuickBooks, you will need to make sure your Chart of Accounts matches your QuickBooks Accounts. Printing your Chart of Accounts can make this process a little easier.

Printing Your Chart of Accounts Once you set up your Chart of Accounts, we recommend that you print it out for your records. To print your Chart of Accounts, perform the following steps:

1 2 3

Expand the Customize section within Setup. Click on Chart of Accounts. The Chart of Accounts page displays a list of of all your accounts. At the top of of the Chart of Accounts page click the Print button.

4

The Chart of Accounts opens in a new browser window; click the Print Page link at the top right of the page.

5

Once the Chart of Accounts has finished printing, click the Close Window link to return to Propertyware.

Se tting up B ank Accounts If you are managing properties for one or more owners and plan to charge management fees for your services, we recommend the following when setting up your Chart of Accounts:

 Cr ea te ba nk accounts for your operations. We recommend that you have at least one bank account to use as an "operating account" for daily operations of your properties under management. Use this account for rental income, maintenance maintenance expenses and other transactions relating to your properties. Alternatively, you may want to to create separate operating accounts for each of your portfolios portfolios under management. For example, if you have different bank accounts in the real world to handle transactions for your properties, then you would more than likely want to have a corresponding operating account in Propertyware. Propertyware Administrator Guide

02-18-10

Page | 52

 Cr ea te a Security D eposit Bank Account. Security and pet deposits are funds that you intend to return to the tenant that generally do not affect the portfolio portfolio balance. We recommend you hold these monies in their own security deposit bank account to track them appropriately. Similar to the operating account, you can have one security deposit account for each your properties.  Create a management bank account. You must have a separate bank account in order order to properly record management fee payments for your services. services. Deposit all management fees into this account.

Custom Fields In this section, you can create custom fields for the purpose of tracking virtually any type of information within Propertyware. Propertyware. You can create fields in the following sections of the application: Application Assessments Buildings Contacts y y y y

Cr ea ting Custom Fi el ds

1 2 3

4 5 6

Expand the Customize section within Setup. Expand Custom Fi el ds. Click on the name of the custom field type you would like to create. For example, if you want to create a custom lease field, click Lea se s. The text No Custom Fields appears on the page if no custom fields exist. Otherwise you will see a list of previously created custom fields. Click the New Custom Fiel d button. Enter a field name to best describe the field being created. For Data Type, click the drop-down menu and select the appropriate data t ype for the field being created. The following table lists the different different field data types and a description of each type:

Dat a Typ e

D escription

Tex t

Creates a text field which can accept up to 100 characters of text and/or numbers.


02-18-10

Page | 53

Dat a Typ e

D escription

Num be r

Creates a numerical field which can accept any number. The number will will be treated as a real number where any leading zeros will be removed.

Currency

Creates a numerical field which will be converted to dollar and cents values.

Perc entage

Creates a numerical field which will be converted to a percentage; the system automatically adds the percent sign to the number.

URL

Creates a field into which a URL can be entered. The maximum number of characters for this field it 100. It is not necessary necessary to include the http:// http:// prefix.

D a te

Creates a date-formatted date-formatted field. Data entered into a date field will be formatted as mm/dd/yyyy. This field is the only type of field that will allow you to create an associated alert for the field.

Picklist

Creates a field that can have up to 15 different options, displayed in a picklist, from which users can choose.

Memo

Creates a field that allows users to enter unlimited free form text.

7

For Default Value, optionally enter a value that will will default during data entry. The default value may be changed when data is being entered.

8

For Required Field, accept the default value of "No" if the field is not a required field, otherwise, select "Yes" and a value in this field will be required during data entry.

9

If Picklist is selected for data type, you will need to enter in the various picklist options. Option 1 is the default option that will be accepted if no other option is selected from the picklist. For example, let's say you you want to create a Yes/No picklist picklist field, and want the default value to be No. You would enter "No" as Option 1 and "Yes" as Option 2. 2.

10 Click the Save button.


02-18-10

Page | 54

Important In addition to creating custom fields from under Setup >Customize > Custom fields you can also create custom fields directly on specific pages (leases, contacts, buildings, etc.) when in Edit mode.

Editing or D ele ting Custom Fiel ds

1 2 3 4

Expand the Customize section within Customize. Expand Custom Fi el ds. Click on the name of the custom field type you would like to edit or delete. For example, if you want to edit a custom lease field, click Lea ses. Locate the custom field field to be edited edited or deleted. To edit the field, select the Edit link. To delete select the Del link. Note: When a custom field is deleted, all data stored within that field will be lost.


02-18-10

Page | 55

QuickBooks In this section, you can set up the sync settings for QuickBooks so that you will be able to sync the income and expense transactions to a designated QuickBooks company file. If you have not previously configured your sync settings, you will have the options of downloading and installing the software, watching a training video regarding sync (recommended), and configuring your settings. For more detailed information on the the Property Sync function, please refer to the Propertyware S ync for use with QuickBooks user guide which can be downloaded from this location: http://www.propertyware.com/km/getattachment.php?data=MjY2fFByb3BlcnR5d2FyZV9TeW5jX 2Zvcl9RdWlja0Jvb2tzLnBkZg%3D%3D

Leases In the Leases section, you can modify the default lease form, create new lease forms and edit existing lease forms. In addition, you can create Lease Addendums, add Lease Termination Codes (i.e., reason tenant vacated), and setup and/or edit Public Assistance Program options. The intent of the default lease form is to automate the creation of leases in Propertyware. Note that this "form" is not the same thing as an actual lease document that you hand to tenants to sign prior to their moving in to the property. Rather, the default lease form is simply a template comprised of standard lease fields, lease addenda, and move-in charges such as application fees and security deposit charges. All information entered on this lease form is carried over to the actual lease agreement you generate using mail merge. You can create additional lease forms, both commercial and residential, thereby automating your leasing process by avoiding manually creating a lease for each new tenant. Cr ea ting a nd Editing Lea se Forms To create a new or edit an existing lease form, perform the following steps:

1 2 3 4

Expand the Customize section within Setup. Expand Lea ses. Click on Forms. To edit a lease form (including the default lease form), select the Edit link in the Action column of the lease form you want to edit OR To create a new lease form, click the New Lea se Form button.


02-18-10

Page | 56

Lease Forms consist of four pages, which must be visited and/or edited in order. As you navigate forward through the Lease Form, the navigator at the top of the screen changes to show you which step of the process you are on. Whether you are configuring a new lease form or editing a previously existing lease form, you must proceed through all four pages of the form using the Next button. button. You can navigate backwards to access a previous step, but you cannot jump over a step to get to the end of the form. The lease form pages are described in the table below:

Lea se Form Pa ge

D escription

Pa ge 1: Summ ary N ame

Enter a Name for the lease form.

D escription

Enter a description for the lease form.

Av ailable for Use?

Designate whether you would like to make this form available for use within the application. S electing "Yes" will activate the form for use by all users within your account. Selecting "No" will inactivate the form for use by all users including you. Note that the default lease form can only be edited, it cannot be disabled. To move to Page 2: Lease Fields, click the Nex t button. To quit, click the Cancel button.

Pa ge 2: L ea se Fiel ds St a ndard L at e Fee and St a ndard NSF F ee Ru le s

Late Fee Rule s Fee Typ e


Click Edit in the Action column for either Late or NSF Fee to display the Late Fee and NS F Fee Rules page.

Click the drop-down menu to select from one of the following: Per Day Fee, Range, Initial Fee + Per Day Fee or Greater of Flat Fee or Percentage. If either Per day Fee or Range is selected, you have the option of selecting Fixed Amount, % of Rent and % of Lease Balance. 02-18-10

Page | 57

Lea se Form Pa ge

D escription

If Range is selected, you must define a range of due dates, with each period (or "range") having different late fees. For example, if you have a grace period in which no late fees are incurred until after the grace period, select Range and enter a $0.00 amount for the first "range" and enter a % or fixed amount for the second range. If Initial Fee + Per Day Fee is selected, you must define the initial amount and specify whether this amount is a fixed amount, % of rent or % of lease balance. In addition, you must specify the per day fee as either a fixed amount, % of rent or % of lease balance. If Greater of Flat Fee or Percentage is selected, you must specify a flat fee amount and a percentage. Du e D at e

For all Fee Types other than Range, enter due date. For example, if rent is due and payable on the first of each month, enter "1."

Amount

If Per Day Fee was selected for Fee Type, enter the amount of the late fee.

Max imum

S elect


"No" if there is no maximum amount that can be charged in late fees. Select "Yes" if there is a maximum amount to be charged, and enter in that dollar amount.

02-18-10

Page | 58

Lea se Form Pa ge App ly This Rule To

Bounced Ch eck P e nalty Ru le

D escription S elect

"New and Existing Leases That Use This Form" or "New Leases that Use This Form Only." Note: When editing the Default lease form or an existing lease form, if you select "New and Existing Leases That Use This Form" the rules for calculating late fees for all existing leases based on that form will change based on the new rules. In addition, if you have set late fees to calculate nightly, going forward any late fees on tenant ledgers will be based both the OLD and NEW late fee calculation rules. rules. Therefore it it is extremely important that you set up your late fees correctly before Propertyware starts posting late fees to tenant ledgers. S elect

either Fixed Amount or % of Payment.

Amount

Enter the fixed amount or percentage.

Comm ents

Enter comments to describe the nature of the NSF charge which will appear on tenant ledgers that will be assigned to all new leases generated from this form. When finished click the Save button. A pop-up window displays a reminder that you must complete the wizard and save the lease form for your change to take affect. Click the OK button to continue.


02-18-10

Page | 59

Lea se Form Pa ge CPI

D escription

For CPI, select Yes to include the CPI increases on the lease form or select No if you do not want the CPI increases displayed on the form. Select

Edit in the Action column to set the CPI review month, frequency, low increase percentage, high increase percentage and comments. When finished click the Save button. Inspection Schedule

If you would like to set up an inspection schedule for the lease form, click on Setup an Inspection S chedule. Enter the frequency, the responsible party, cost estimate and a description. Select to which leases this schedule should apply. To move to Page 3: Addendum, click the Nex t button. To quit, click the Cancel button.


02-18-10

Page | 60

Lea se Form Pa ge

D escription

Pa ge 3: Addendum

A lease addendum contains language you can add to your standard lease agreements, in order to describe special contractual differences from one lease to another. To attach a lease addendum: 1. click the Add Addendum button. The New Addendum box appears on the screen. 2. From here, here, you can pick an addendum from your library by clicking on the drop-down menu in the From Library field. You also have the option of creating a new addendum by entering a name and the text of the addendum. If the Add to Library is checked, the newly created addendum will be added to your library. 3. After selecting an addendum or creating a new one click the Save button. Repeat the above steps as necessary if you would like to create additional addendums. To move to the Page 4: Move In Charges section click the Next button. To quit, click the Cancel button.

Pa ge 4: Mov e In Cha rge s Se curity Deposit

Prora te Ra te


This option allows you to designate a default security deposit rule for all new leases created using this lease form. Either enter the number of month's rent or a fixed dollar amount as the default security deposit. This option allows you to set the default prorating rule for all leases created using this lease form. The options include: 1. Do not Prorate - No prorating calculation. 2. First Month - Prorate the first lease month. 3. Second Month - Prorate the second lease month. 02-18-10

Page | 61

Lea se Form Pa ge St a ndard Charg es Du e at Mov e In

D escription

Here you can set standard charges to appear in the move in calculation for all new leases generated from this lease form. Such standard charges typically include application fees and key deposits. To create a charge, click the Add Charge button. S elect

an income account where the charge is to be deposited, enter a description of the charge, and then the charge amount. To create additional charges, simply click the Add Ch arge button at the bottom of the table. To delete a charge, click the Del link to the right of the Amount column for the charge to be deleted. After entering or modifying all Move In Charges, click the Sa ve button. To quit, click the Cancel button.

Important You can create a number of different lease forms with different late fee or N SF fee rules. Users will have the option of choosing which lease form to use when generating a new lease for a tenant.

Cr ea ting Lea se Add endums A lease addendum contains additional language you can add to standard lease agreements, in order help describe special contractual difference from one lease to another. another. Propertyware allows you to create lease addenda that you can attach to leases. Examples of useful lease addenda include rules for pets, options to renew, or language to describe subletting.

In addition to creating lease addendums while creating or editing lease forms, you can edit or create lease addendums independently from that process. To create a new Lease Addendum, perform the following steps:

1 2

Expand the Customize section within Setup. Expand Lea ses.


02-18-10

Page | 62

3

Click on Add endum. This page displays a list of all previously created lease addendums. If no previous lease addendum have been created only the words No Addendum are present on the page.

4 5 6

Click the New Adde ndum button

7

Enter a name. The addendum name can contain contain a maximum of 50 characters. Enter the text of of the addendum. This is the language that describes the lease lease clause. An unlimited amount of characters are allowed in this field. Click the Save button.

Cr ea ting Lea se Termination Code s Lease termination codes allow you to track the reason for a tenant's termination of his or her lease. Propertyware tracks this information information during the Move-Out process on any lease. Propertyware comes with several standard termination codes. You can delete standard termination codes or create new ones.

1 2 3 4 5 6

Expand the Customize section within Setup. Expand Lea ses. Click on Termination Codes. The Termination Termination Code page displays. Click the New Termination Code button. Enter a code name. Click the Save button.

D ele ting L ea se Te rmination Codes

1 2 3 4

5

Expand the Customize section within Setup. Expand Lea ses. Click on Termination Codes. The Termination Termination Code page displays. Click the Del link that appears under the Action column for the code you want to delete. Only administrator-created options can be deleted. A Delete Confirmation pop-up window displays, prompting you to reassign a new termination code to those leases that are currently assigned to the code being deleted. S elect an alternative code from the drop-down menu. Click the Dele te button.

Cr ea ting Lea se Pu bl ic Assista nce Options

1 2

Expand the Customize section within Setup. Expand Lea ses.


02-18-10

Page | 63

3 4 5 6

Click on Pu bl ic Assistanc e. The Public Assistance Program Option Option page displays. displays. Click the New Pu bl ic Assista nce Progra m Option button Enter an Option name. Click the Save button.

D ele ting L ea se Pu bl ic Assista nce Options

1 2 3 4

Expand the Customize section within Setup. Expand Lea ses. Click on Pu bl ic Assistanc e. The Public Assistance Program Option Option page displays. displays. Click the Del link that appears under the Action column for the code you want to delete. N ote: Only administrator-created options options can be deleted.

5

A Delete Confirmation pop-up window displays, prompting you to reassign a new option to those leases that are currently assigned to the option being deleted. Select an alternative option from the drop-down menu.

6

Click the Dele te button.

Maintenance Propertyware offers a Premium Add-On Module to track maintenance processes for your properties such as work orders and service requests. The Maintenance Module provides your business several essential tools to raise the bar on property maintenance satisfaction. From collecting service requests to managing work orders orders online, this module automates your your entire maintenance process. The Maintenance Module also integrates with your Propertyware Portal, where tenants may submit service requests online at any hour of the day. En abl ing the M aint enanc e Module

7 Expand the Administration Setup section within Setup. 8 Expand Bi lling. 9 Click on Pla n Options. The Subscription Plan Options page displays. 10 Under the Premium Add-On Modules section, select the check box for Maintenance. N ote:

Enabling this module may affect your y our company's subscription price.

11

Click the Continue button at the bottom of the page. The Subscription Confirmation page displays.

12

Verify, update or enter the billing information and payment method.


02-18-10

Page | 64

13

Click on the Yes, I a gree button.

Editing M aint enance Settings

1 2 3 4 5

Expand the Customize section within Setup. Click on Ma int ena nce. The Customize Customize Maintenance page displays. Click the Edit Maint e nance Settings button. Update your companys general maintenance phone number and whether or not work orders require approval. Click the Save button.

Cr ea ting New Maint ena nce Categorie s

1 2 3 4 5

Expand the Customize section within Setup. Click on Ma int ena nce. The Customize Customize Maintenance page displays. Click the New M aint ena nce Category button. Enter a name for the new maintenance category being created. Click the Save button.

D ele ting Maint ena nce Categories

1 2 3

Expand the Customize section within Setup. Click on Ma int ena nce. The Customize Customize Maintenance page displays. Click the Del link that appears under the Action column for the category you want to delete. Note: Only administrator-created categories categories can be deleted.

4

A Delete Confirmation pop-up window displays, prompting you to reassign a new category to those work orders that are currently assigned to the category being deleted. S elect an alternative option from the drop-down menu.

5


Cr ea ting Work Order Source Options

1 2 3 4

Expand the Customize section within Setup. Click on Ma int ena nce. The Customize Customize Maintenance page displays. Click the New Work Order Source Option button. Enter a name for the new work order source being created.


02-18-10

Page | 65

5


D ele ting Work Ord er Source Options

1 2 3 4

Expand the Customize section within Setup. Click on Ma int ena nce. The Customize Customize Maintenance page displays. Click the Del link that appears under the Action column for the work order source you want to delete. Note: Only administrator-created source options options can be deleted. Click the Save button.

Management In the Management section, you can configure settings to reflect how your management company does business. From this area of setup you can:  Edit management info  Customize your owners statements  Configure your default management fee rule  Map management income accounts

Important Some of the settings in this section may have

been configured at the time your Propertyware Propertyware account was created through the Setup Assistant.

Configuring Your Ma nage ment Compa ny Info

1 2 3 4 5

Expand the Customize section within Setup. Click on Ma nagement. The Management Settings page displays. Click the Edit button. Enter or update the fields on this page as appropriate. When finished, click the Sav e button. A description of the the fields fields appears in the table below: Fi el d

D escription

Ma nagement Info M anageme nt Compa ny N a me

Enter the name of your management company. This will also become the name of your


02-18-10

Page | 66

Fi el d

D escription

management company portfolio that will be used to track the income and expenses for your management company. Note:

A management-company vendor record was automatically created for your management company and appears in Money Out O ut | Vendors. This default management-company vendor will be used when creating bills to your y our owners for your management fee. M anageme nt Portfolio A bb revi ation

This field gets generated automatically if you hit the TAB key on your keyboard after completing the Management Company Name field. You can can highlight and edit it to anything you like. We recommend MGMT-CO if you dont like what you see.

M anageme nt B ank Account

We recommend you maintain a separate bank account for your management company income rather than commingling funds with various owner portfolios. The Management Bank Account is the bank account into which your management fee income is deposited when management fee bills are paid. From the drop-down menu, select the appropriate bank account. If you don't see see the account you want, you can create a new account in the chart of accounts.

Tra ck M ana gement Incom e

Use this field to determine whether or not to track income for your management company when bills are paid to any of your managementcompany vendors. Select one of the following: Yes - Track the income whenever managementcompany vendor bills are paid. This income may may be viewed by selecting your management portfolio in the Other Customers area of the


02-18-10

Page | 67

Fi el d

D escription

Money In tab. No - Do not track the income whenever management-company vendor bills are paid.

See Management Income Mapping below for more information on how your managementcompany vendor is used for tracking management income. Portfolio B ala nce Mod e

S elect

an option for how the portfolio bala nce should be handled. You have three choices: No r estrictions. Propertyware allows you to create transactions that will cause the portfolio balance to go negative. Dis all o w nega tiv e for new tr ansactions. Propertyware prohibits you from creating new transactions that will cause the portfolio balance to go negative. Note:

If you switch to this method after a fter your portfolio balance has gone negative, this setting will prevent you from creating additional transactions that would cause your balance to go even further negative, however, it will not "undo" the transactions that caused the portfolio balance to go negative in the first place. pl ace.

Dis all o w bel o w minimum for new tra nsa ctions. Propertyware prohibits you from creating new transactions that will cause the portfolio balance to go below the portfolio minimum. Owner Dr aw Mod e

S elect

an option for how owner draws should be handled. You have have two choices: Bala nce minus minimum. Propertyware will pay the owner the entirety of their portfolio balance minus any portfolio minimum. Bala nce minus minimum minus unp aid b ills. Propertyware will total any unpaid bills within the


02-18-10

Page | 68

Fi el d

D escription

portfolio and subtract that total from t he amount to be paid to the owner minus any portfolio minimum. M anageme nt F ee Mod Mo de

S elect

an option for how your management fee will be calculated. You have two choices: Use Mana gement F ee Cal culator. This setting requires that you manually process management fees on a periodic basis using the Management Fee Calculator. F or or detailed information on using the Management F ee ee Calculator, refer to the Management F ee ee Calculator section that can be found on line at this location: l ocation: http://www.propertyware.com/km/questions/174/ Management+Fee+Calculator Continuously C al cula ted. Management fee rules are automatically calculated and paid whenever you receive income for those portfolios that have this option selected. selected. With this method, you always collect your management fees prior to paying your owners.

Continuously Calculated is best suited to companies that pay owners more frequently than once per month and/or for those that charge based on percentage rather than a flat fee. M anageme nt St ateme nt P eriod

If your monthly statement period is a time frame other than a calendar month (i.e., 1st to the last day of the month), you can set the statement period in this field. For example, if your statement period begins on 15th of the month select custom from the drop-down menu and select 15th. The management fee calculator looks at transactions from the 15th of one month to the 14th of the next month.

Owne r St at ements


02-18-10

Page | 69

Fi el d

D escription D efault St atement

If your monthly statement period is a time frame other than a calendar month (i.e., 1st to the last day of the month), you can set the statement period in this field. For example, if your statement period begins on 15th of the month select custom from the drop-down menu and select 15th. The management fee calculator looks at transactions from the 15th of one month to the 14th of the next month.

St ateme nt Comm ents

Enter any comments that you would like to appear on your owner statements.

Ma nagement F ee Rule

In this section, you can setup default management fee rules that will be used for all new portfolios. You also have the option of setting the management fee rule to all existing portfolios. To set up a default management fee rule that is based on a percentage of collected transactions, complete the following fields:

F ee Typ e

S elect

one of the following options:

Gr ea ter of Fla t F ee or P erc enta ge. This option allows you to set a minimum amount  charged as a flat fee at the portfolio level  for your management fees. If this option option is selected, selected, the flat fee amount you specify in the Flat Fee field is what will be billed to your owners unless the fees generated through your commission account/percentage fee setup exceed that amount, in which case the greater amount will be charged. With this scenario some owners may be billed your minimum fee while others may be billed the greater amount. F lat F ee + Percent age. This option allows you to set a flat fee to be charged to the portfolio in addition to the fees charged through your


02-18-10

Page | 70

Fi el d

D escription

commission account/percentage fee setup. F la t F ee

The Flat Fee will apply to each Fee Type above. A flat fee may be used to impose a minimum fee in a greater of scenario or each time a management fee bill gets created. If you charge straight percentage commissions, simply set the Flat Fee amount to $0.00. Note:

If your company company charges a flat fee fee for managing a portfolio, regardless of money collected in any given month, then the management fee can be set up as an Auto Bill. Management fees set up as Auto Bills will be created periodically and will require re quire you to pay them like any other bill created in the owners portfolio. Be sure to setup the management fee auto bill using the management-company vendor and set the bill split to the appropriate portfolio that you wish to bill. Portfolio Minimum

The portfolio minimum balance should not be considered a reserve account for the portfolio since there is no bank account associated with this amount. The Portfolio Minimum amount simply reflects the minimum amount that must be retained in the portfolio at all times and is referenced whenever bills are paid from the portfolio. Propertyware will not allow a portfolio to drop below this minimum amount.

Commission Accounts

This field allows you to designate those accounts that you would like to charge a commission (i.e. income, expense or liability) when a transaction has been recorded recorded in Propertyware. These commission accounts will be included in the management fee calculator when you generate your management fee bill.


02-18-10

Page | 71

Fi el d

D escription

To designate a commission account: 1. Click the Add Commission Account button. 2. In the percentage column, enter the percentage amount you will receive on the commission account. For example, if you are to receive 10% of rent income, enter 10.00% in this field. 3. From the Commission Account drop-down menu, select the account you would like to designate as commissionable. 4. If you pay a commission to your property managers, enter the rate paid in the Manager's Commission field. 5. The Pass-Through Pass-Through option is a flag that can be be set on commission accounts that causes income applied to these accounts to be broken out as separate line items in the management fee calculator. Since passthrough accounts are their own line items in the management fee calculator, the income is "passed through" to the management company instead of appearing as a management fee expense to the owner. The net of income collected and the income earned to the pass-through accounts is zero once you create the management fee bill; the sums are not shown on the Summary Owner Statements. 6. Repeat steps steps 1 - 3 to create additional Commission Accounts. 7. To delete a Commission Account, click the Del link that appears in the Action column. Mov e In L easing Fee Ru le


In addition to your management fees, if your management company also charges a fee to lease a unit, you can set a rule for this leasing fee. To 02-18-10

Page | 72

Fi el d

D escription

set a leasing fee rule, click the Yes radio button and enter in the flat fee amount or the percent of rent to charge. Note:

If the leasing fee rule is the same for all buildings, you can set the leasing fee rule to be the same by clicking on the Set This Rule On A ll Bui ldings button which is visible on the Management Settings page when not in Edit mode. Ma nagement Incom e Mapping

This section allows you to map expense accounts to income accounts for the purpose of tracking income earned through non-management feerelated services. By default, expense accounts are mapped to income account 4015 4015 - Management Management Income. You may, however, wish to categorize this management income by creating sub-accounts of the default Management Income account. To change the mapping of an expense account to another income account, simply choose the appropriate income account from the Mapped Income Accounts menu.

Portfolio S ettings St anda rd D ef ault B ank Account

Click the drop-down menu to select a bank account to be used as the default bank by all portfolios.

D efault S ecurity D eposit B ank Account

Click the drop-down menu to select a bank account to be used as the default security deposit bank account for all portfolios.

Important Mor e about M anageme nt Tr acking, Ma nagement Income Mapping and your M ana gement-Compa ny V endor.


02-18-10

Page | 73

Lets say your management company charges its owners for snow removal and you want to track that income income when your owners pay pay those bills. If you do not not already have a snow removal expense account in your Chart of Accounts, you would have to create it. For purposes of this example, you create your snow removal expense account as  Snow Removal. By default, when this expense account was was created, it was mapped to Management Income. However, you would like to map this expense account to a sub-account you created called Management Income: Snow Removal. You change this mapping on the Management Settings page by selecting the Management Income: Snow Removal account for the Snow Removal expense account. When generating bills to your owners for the snow removal service, you would use your default management-company vendor (or any management-company vendor that was set up specifically to bill for this service). Once the bills are marked as paid, the snow removal service income will be tracked and can be viewed by selecting your management portfolio in the other customers area of the Money In tab.

Marketing In the Marketing section, you can indicate whether or not to publish yours sales and rental listings to Hotpads, Trulia and Rental Home Home Professionals. You can also configure items items that will print on your property brochures. Editing M ark eting a nd Brochure Se ttings

1 2 3 4 5 6

Expand the Customize section within Setup. Expand Marketing . Click on Settings . The Customize Marketing page displays. Click the Edit Mark eting S ettings button. Enter or update the fields on this page as appropriate. When finished, click the Sav e button. A description of the the fields fields appears in the table below: Fi el d

D escription

Mark eting Settings

In the Marketing Settings section you can indicate whether or not to publish your rental and sales listings to several web sites. sites. The web


02-18-10

Page | 74

Fi el d

D escription

sites you can publish your listings to include:  Hotpads  Trulia  Rental Home Professionals Brochur e S ettings

The Brochure settings controls the items that are displayed on your Available Properties brochure. In addition, you can specify a sort order for the properties listed. You can control whether to display or suppress the following items on the brochure:  Marketing Name  Lease Terms  S ale Terms  Availability Date

Sort Order

The sort order controls how units display in the multi-listing brochure.

Rental s Pr ef ace

Text entered here appears above the rental listing in the Available Properties brochure.

Sale s Pr efa ce

Text entered here appears above the sales listing in the Available Properties brochure.

Ca mpa ign Sources Campaigns allow you to track online and offline marketing campaigns. A number of predefined campaign sources can be found in this section, and if you would like to create additional campaign sources, you can do so here as well. Creating campaign sources in this location adds them to the list of campaigns that users can select when creating a new campaign in the Marketing module.

Properties In this section, you can create, edit and delete unit and building types, create amenities to better describe your buildings and units, and enter a list of deactivation codes. Cr ea ting Bui lding and Unit Types

1

Expand the Customize section within Setup.


02-18-10

Page | 75

2 3 4 5 6 7

Expand Properti es. Click on Types. The Customize Properties: Unit Unit and Building Types page displays. Click the New Typ e button. Enter a name for the building or unit type being created. S electing

Building or Unit from the drop-down menu.


Editing Bui lding a nd Unit Types

1 2 3 4 5 6

Expand the Customize section within Setup. Expand Properti es. Click on Types. The Customize Properties: Unit Unit and Building Types page displays. Locate the building or unit type to be edited and click on the Edit link in the Action column. Make changes to the name and/or building or unit type. Click the Save button.

D ele ting Bui lding and Unit Typ es

1 2 3 4

Expand the Customize section within Setup. Expand Properti es. Click on Types. The Customize Properties: Unit Unit and Building Types page displays. Click the Del link that appears under the Action column for the building or unit un it type you want to delete.

5

A Delete Confirmation pop-up window displays, prompting you to reassign a new type t ype to the buildings or units that are currently assigned to the type being deleted. Select an alternative type from the drop-down menu.

6


Cr ea ting Ame nities

1 2 3 4

Expand the Customize section within Setup. Expand Properti es. Click on Amenitie s. The Customize Properties: Properties: New Amenity/Building Amenities Amenities page displays. Enter a name for the building or unit amenity being created.


02-18-10

Page | 76

5 6 7 8

Enter a 4-character code to describe the amenity. S elect

Building or Unit from the drop-down menu.

Click the Save button. Repeat steps 3-6 for each amenity being created.

Editing Am enities

1 2 3

Expand the Customize section within Setup. Expand Properti es. Click on Amenitie s. The Customize Properties: Properties: New Amenity/Building Amenities Amenities page displays.

4

Locate the building or unit amenity to be edited and click on the Edit link in the Action column.

5 6

Make changes to the name, code or building or unit type. Click the Save button.

D ele ting Amenities

1 2 3

Expand the Customize section within Setup. Expand Properti es. Click on Amenitie s. The Customize Properties: Properties: New Amenity/Building Amenities Amenities page displays.

4

Click the Del link that appears under the Action column for the building or unit amenity you want to delete.

5

At the Are you sure? prompt, click OK.

Cr ea ting D ea ctiva tion Codes

1 2 3 4 5 6

Expand the Customize section within Setup. Expand Properti es. Click on Dea ctivation Code s. The Customize Properties: Properties: Deactivation Codes page displays. Click on the New Dea ctivation Code button. Enter a code that best describes the reason a property is being deactivated. Click the Save button.

Editing D ea ctivation Codes


02-18-10

Page | 77

1 2 3

Expand the Customize section within Setup. Expand Properti es. Click on Dea ctivation Code s. The Customize Properties: Properties: Deactivation Codes page displays.

4

Click the Edit link that appears under the Action column for the deactivation code you want to edit.

5 6

Make changes to the code. Click the Save button.

D ele ting Dea ctivation Codes

1 2 3

Expand the Customize section within Setup. Expand Properti es. Click on Dea ctivation Code s. The Customize Properties: Properties: Deactivation Codes page displays.

4

Click the Del link that appears under the Action column of the deactivation code you want to delete.

5

A Delete Confirmation pop-up window displays, prompting you to reassign a new deactivation code to the buildings or units that are currently assigned to the code being deleted. Select an alternative type from the drop-down menu.

6


In the Vendors section, you can create new vendor types, and edit and delete existing vendor types.

Vendors Vendor types help you to categorize the vendors with which you do business by type of service provided. Examples of vendor types could be Contractors Carpentry, Contractors - Plumbing, Services - Advertising and Suppliers - Flooring. Cr ea ting Vendor Typ es

1 2 3 4

Expand the Customize section within Setup. Click on Ve ndors. The Customize Customize Vendors page displays. Click the New Vendor Typ e button. Enter the name of the Vendor Type.


02-18-10

Page | 78

5

If the Vendor Type is a sub-class of an existing Vendor Type, select the Parent from the drop-down menu.

6


Editing V endor Typ es

1 2 3 4 5

Expand the Customize section within Setup. Click on Ve ndors. The Customize Customize Vendors page displays. Locate the vendor type to be edited and click on the Edit link in the Action column. Make changes to the vendor type or parent. Click the Save button.

D ele ting V endor Type s

6 7 8 9

Expand the Customize section within Setup. Click on Ve ndors. The Customize Customize Vendors page displays. Click the Del link that appears under the Action column for the Vendor Type to be deleted. A Delete Confirmation pop-up window displays, prompting you to reassign a new vendor type to the vendors that are currently assigned to the vendor type being deleted. Select an alternative type from the drop-down menu.

10 Click the Dele te button.


02-18-10

Page | 79

Task Lists You can create templates for task lists that will be available from the Desktop task list feature. Task lists can be created for routine tasks such as moving in a new tenant, performing inspections or making a unit rent ready. Cr ea ting a Task List Te mplate

1 2 3 4

Expand the Customize section within Setup. Click on Ta sk Lists. Click the Add Temp late button. Enter a name for the task list template being created.

a Optionally enter a description for the task list. Task pop-up page page displays. 5 Click the Add Task button. The New Task 6 Optionally select a user to whom the task list should be automatically assigned. 7 Enter a description for the task. 8 Click the Save button. 9 Repeat steps 5-8 for each additional task. 10 Click the Save button on the task list template when finished.


02-18-10

Page | 80

Templates The Templates section consists of a shared repository of mail merge and email templates. Propertyware includes a number of standard mail merge templates which you can view, modify or delete. In addition, you can create your own custom mail merge and email templates. Using the Template Gallery, you can preview templates and add templates to your list of available templates.

Mail Merge Templates You can create, edit, copy and delete templates that display in the Mail Merge Templates page. Cr ea ting M ail Merg e Templa tes

1 2 3 4 5 6 7

Expand the Templates section within Setup. Click Ma il M erg e Te mpla tes. Click the New Te mpla te button. The New Template page displays. Enter a Template Name. S elect

a Template Type from the drop-down menu.

If necessary, click on the Description section to display the Description box and enter a description of the template you are creating. The Content section includes a list of fields that can be inserted into the template and a text window.

a Type text for the document into the text window. You can select the font type and size and use formatting attributes as necessary to emphasize text with bold, italics and underline.

b Insert data fields from the list of available fields into the template at the location you want that data to appear within the document.

8

In the Page S etup section make any changes to the the layout of the page. Options include:  Orientation and Paper Size  Top & Bottom Margins  Left & Right Margins  Margin Units  Show Page Numbers

9



02-18-10

Page | 81

Important Before editing any template, it is a good idea to make a copy of that template so that you can revert to the original template if necessary. Refer to the Copying Mail Merge Templates section below. Editing M ail Merg e Te mpla tes

1 2 3

Expand the Templates section within Setup. Click Ma il M erg e Te mpla tes. Locate the mail merge template to be edited and select Edit from the drop-down menu in the Action column. The Edit Edit Template page displays.

4

If necessary, click on the Description section to display the Description box and modify the description if desired.

5

The Content section includes a list of fields that can be inserted into the template and a text window.

a Edit the text or enter in new text for the document into the text window. You can select the font type and size and use formatting attributes as necessary to emphasize text with bold, italics and underline.

b Insert data fields from the list of available fields into the template at the location you want that data to appear within the document.

6

In the Page S etup section make any changes to the the layout of the page. Options include:  Orientation and Paper Size  Top & Bottom Margins  Left & Right Margins  Margin Units  Show Page Numbers

7


Copying Mail M erge Te mp lat es

1 2 3 4

Expand the Templates section within Setup. Click Ma il M erg e Te mpla tes. Locate the mail merge t emplate to be copied and select Copy from the drop-down menu in the Action column. The selected template will be copied and the new version will appear directly below the template that was copied.

D ele ting Mail Merge Templa tes


02-18-10

Page | 82

1 2 3 4

Expand the Templates section within Setup. Click Ma il M erg e Te mpla tes. Locate the mail merge template to be deleted and select Delete from the drop-down menu in the Action column. Click the OK button in the confirmation window to delete the template.

Mail Merge Template Gallery The Template Gallery provides an online gallery of pre-designed default mail merge templates for common document types, such as residential lease agreements, rental applications, tenant statements and more. From the Template Gallery, you c an select any number of default templates to be added to the working list of mail merge templates, called My Mail Merge Templates. Once added to this working list, users can select any of the templates to perform a mail merge; additionally those users with permissions to do so, may edit these templates. Adding a Templa te from the Templa te Galle ry

1 2 3

Expand the Templates section within Setup. Click on the Te mpla te Gallery button. The Template Template Gallery page displays templates listed by template type. Locate and select the template to be added to My Templates.

a To preview the template click on the Preview link. b To add the template, click clic k on the Add to Templates link.

4 5

The phrase The Template has been added appears at the top of the screen. Click << Back to My Mail Merge Templates to return the My Mail Merge Templates listing. The templates that were added will now appear in the list. N ote: You can sort the My Mail Merge Mer ge Templates listing by clicking on any of the und erlined column headings (type, name, description des cription and last modified).

Email Templates You can create, view, edit and delete email templates that display in the Email Templates page. Cr ea ting Ema il Templa tes

1 2

Expand the Templates section within Setup. Click Email Templa tes.


02-18-10

Page | 83

3 4 5 6

Click the New Te mpla te button.

7


Enter a Template Name. Enter a subject for the email template. Enter text for the email template. You can select the the font type and size and use formatting attributes as necessary to emphasize text with bold, italics and underline.

View ing, Editing a nd D ele ting Em ail Te mplate s

1 2 3 4 5

Expand the Templates section within Setup. Click Email Templa tes. Locate the desired email template and click on the View link to review the template, the Edit link to make changes, or the Del link to permanently remove the template. Making editing changes as appropriate. Click the Save button.


02-18-10

Page | 84

Other Functions In addition to the administrator functions located in the setup section of Propertyware there are several administrative functions located in the Properties module. These functions are Grid Edit and Close Accounting Periods. We have also included a section on the areas within Propertyware that may require updating if you change your company name.

Grid Edit This feature allows you to edit multiple portfolios from one screen. screen. With just a few clicks, you can update certain fields in portfolios, buildings, units, management fee rules, leases and contacts. The Portfolio Grid Edit function function is a powerful tool that that allows you to quickly modify modify fields across portfolios and as such is limited to users with with administrative rights. Keep this in mind when creating new user accounts as you may wish to limit the number of users who have access to this feature. Acc e ssing Grid Edit 1 Click on the Properties tab to access the Properties module. 2 In the sidebar, click on the Grid Edit link; this opens the Portfolio Grid Editor. Working with Grid Edit You can specify views of data to display by selecting from All Portfolios, All Buildings, All Rentable Units, All Management Fee Settings, All Leases Leases and All Contacts. Contacts. The columns columns displayed in the grid depend on which view is selected. By default, the All Portfolios view is displayed.

You can edit text directly within a column by clicking on the data to be edited, making the change and pressing enter or tab to move out of the field just edited. You can sort the data in columns by clicking on on a column heading and selecting a sort order. You can choose which columns to display by clicking on the the Edit Columns button. The Edit Filters button allows you to set filters to limit the data that that is displayed in the grid. The Mass Update button allows you to update values within a particular field for all records displayed in the grid.

Scenario: Adjusting Target R ents using Grid Edit Let's say that you wish to adjust the Target Rent on your 1-bedroom apartments from $900/month to $1000 month but only at one of your properties which is located on Blaisdell Avenue. You would first select select the All Rentable Units Units view. Next create a filter Propertyware Administrator Guide

02-18-10

Page | 85

to select only 1-bedroom apartments at Blaisdell Avenue. Assuming you have only one property on Blaisdell Avenue and all 1-bedroom apartments will be updated, your filter would look like this: Bedrooms equals 1 Address contains Blaisdell On the other hand, if the Blaisdell property has 1-bedrooms with rents that are less than or greater than $900, and you only want to adjust those that currently have a $900/month Target Rent, your filter would look like this: Bedrooms equals 1 Address contains Blaisdell Target Rent equals 900 Note: When entering a dollar amount, do not include the $ sign! Confirm that only the units to be edited are displayed. It is important to note note that by default only 10 rows of data are displayed. displayed. If necessary, increase Show rows to 25, 50, 100 or higher to display more rows rows of data. You can also move from page to page by clicking the arrows located next to the page numbers. Finally, use the Mass Update function to update the the Target Rent data. Click on the Mass Update function and select the column to be updated -- in this case that would be Target Rent -- then enter the new value -- $1000 -- and click Submit. The Target Target Rents for all all 1bedroom apartments at the Blaisdell address displayed in the grid have been updated to $1000. Note: If the field to be updated was contained in your filter, once that field field has been updated with the new value, the records will no longer display because the records no longer match your filter criteria! To display those those records that were updated, modify your filter. Using the second filter example above, the new filter would be: Bedrooms equals 1 Address contains Blaisdell Target Rent equals 1000 Keep in mind that the number of records displayed could be more than the number that were updated if the property already had 1-bedroom apartments with a $1000/month Target Rent.

Closing Account Periods You can close the books for a portfolio portfolio as of a designated date. The Accounting Close Date does the following:  Prohibits users from recording transactions with a date on or prior to the Accounting Close Date.  Maintains global control over over items items entered entered into Propertyware by preventing transactions from being entered into a closed period (i.e., the books have been closed and reconciled). Propertyware Administrator Guide

02-18-10

Page | 86

 Eliminates discrepancies between current current financial information in Propertyware and the financial information reported on owners' statements.  If you sync your Propertyware data data with QuickBooks, preserves the integrity of any reconciliation between your bank statements and your QuickBooks company file performed through the accounting close date. Closing an Accounting P eriod for a Sing le Portfolio

1 2 3

Click the Edit button.

4


Navigate to the portfolio page for the portfolio to be closed. In the Accounting Close Date field, enter the date on which the accounting period was closed for the portfolio.

Closing an Accounting P eriod for Multip le Portfolios

1 2

Click on the Properties tab to access the Properties module. From the Sidebar under Rela ted Activities click on the Close Accounting Periods function. A list of your portfolios is displayed.

3

For those portfolios you would like to set an accounting close date, enter the date or use the calendar icon to select a date. If you intend to use the same accounting close for all portfolios, enter the close date for the first portfolio listed and then click the Set All link.

4

Click the Assign button.

The dates will be entered as the Accounting Close Date on the portfolio page for each portfolio. Removing the Accounting Close D ate

1

Navigate to the Portfolio page for the portfolio from which you want to remove the accounting close date.

2 3 4

Click the Edit button. Remove the date in the Accounting Close Date field. Click the Save button.

Import a nt Considerations rega rding Accounting Close Dat e Make sure that all necessary transactions for the period have been recorded, and that owners' statements are generated and have been verified before closing the accounting period.


02-18-10

Page | 87

You should wait until all transactions for the month to be closed have been entered before setting the accounting close date. Do not enter a future date into into this field as it will prevent users from entering transactions with dates prior to that future date. Users will not be able to record new or edit existing income and expense transactions in a closed period. To create, modify or delete a transaction in a closed period, you can modify the Accounting Close Date for the applicable portfolio. portfolio. This option is disabled for non-administrative users.

Updating Your Company Name If your company name changes and you want to reflect the new name within Propertyware, you will need to update your company company name in several locations. Note that some of these changes can only be done by users with administrative rights. Company Info

1 2 3 4 5

Expand the Administration Setup section within Setup. Click Company Info. Click the Edit button. Update the Company Name. Click Save.

Important Updating

the company name on the Company Info page does not update the company name on the User Account page for existing users who are also employees of your company. If you want to update the company name for your users to reflect the new company name, you will have to do so under Manage Users  User Accounts, editing the company name for each user.

Cha rt of Accounts Your Bank Account Holder Information is located in in your management bank account. If your company's bank account changed to reflect your new company name, you will probably want to update this information in Propertyware.

1 2

Expand the Customize Setup section within Setup. Click Ch art of Accounts.


02-18-10

Page | 88

3

Locate your management bank account in your Chart of Accounts and click the Edit link.

4 5 6

Update the Description field, if appropriate. Update the Bank Account Holder field. Click the Save button.

Note:

If you open a new bank account to reflect the name of your new company, company, create a new bank account instead of updating your existing bank account information.

Portfolio P age By default, the portfolio name for your management company is the same as your company name. You will want to to update the Portfolio name under under the Properties module.

1 2 3 4 5 6

Click on the Properties tab. S elect

your management company portfolio from the list of portfolios in Navigator section in the Sidebar or by using the search function. Click the Edit button. Update the Portfolio Name. Update the Portfolio Abbreviation, if appropriate. Click the Save button.

M ana gement Company V endor Propertyware creates one management-company vendor by default. If you have created other management-company vendors you will need to update those as well.

1 2 3 4 5 6 7

Click on the Money Out tab. S elect

your management-company vendor from the list of vendors in the Navigator section in the Sidebar or by using the search function. Click the Edit button. Update the Vendor Name field, if appropriate. Update the Company Name field. Update the Name on Check field, if appropriate. Click the Save button.

Dom ain N ame (Available only if you have subscribed to the Sites module.)

1 2

Click on the Sites tab. From the Sidebar under Page View, click on Dom ain N ame.


02-18-10

Page | 89

3 4 5 6 7

Click on the Ch ange button. Update the Propertyware Portal URL with the new company name. Click the Save button. Logout of Propertyware. Login to Propertyware.

Note:

Logging out and then back in is necessary for all the URL links to properly update and be reflected within Propertyware. Content P ages (Available on ly if you have subscribed to the Sites m odule.)

1 2 3

Click on the Sites tab.

4

Click on the Save button.

From the Sidebar under Page View, click on Pages. Click on the Edit link for any page that may contain your company name and update those pages with the new company name.

Oth er Sit e s Pages If you have subscribed to the Sites module, you may also want to v iew the Site Logo and Header/Footer pages in the Page View area of the Sidebar in order to verify if your company name had been included on those pages, and if so, to update accordingly.


02-18-10

Propertyware Administrator Guide V3 5_021810-1

Recommend Documents