CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power
Material:
Repetition Rate
Speed
Fiber diameter: µm 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
Stainless Steel
Gas Pressure Focal Position
Tip
Stand off
Gas type
E.G.C.*
[mm] 0,50
[W] 750
[W] CW
[Hz] CW
[mm/min] 18000
[bar] 10
[mm] 0,0
[mm] 1,5
[mm] 0,6
Nitrogen
[Nm3/h] 14,3
1,00 1,50 2,00
1000 1000 1000
CW CW CW
CW CW CW
20000 8000 5000
15 15 15
-1,0 -1,0 -1,5
1,5 1,5 1,8
0,8 0,8 0,8
Nitrogen Nitrogen Nitrogen
20,7 20,7 29,9
2,00 3,00 4,00 5,00 6,00 8,00
2000 2000 2000 2000 2000 2000
CW CW CW CW CW CW
CW CW CW CW CW CW
14000 6000 3000 1600 1200 750
15 18 18 18 18 18
-2,0 -3,0 -4,0 -5,0 -5,5 -8,0
2,0 1,5 2,0 2,5 2,5 2,5
0,8 0,8 0,8 0,6 0,6 0,6
Nitrogen Nitrogen Nitrogen Nitrogen Nitrogen Nitrogen
36,9 24,6 43,8 68,4 68,4 68,4
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power
Material:
Repetition Rate
Speed
µm Fiber diameter: 100 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
Stainless Steel
Gas Pressure Focal Position
Tip
Stand off
Gas type
E.G.C.*
[mm] 0,80 2,00
[W] 1000 1000
[W] CW CW
[Hz] CW CW
[mm/min] 16000 3000
[bar] 11 18
[mm] -0,5 -1,5
[mm] 1,5 1,5
[mm] 0,8 0,8
Nitrogen Nitrogen
[Nm3/h] 15,6 24,6
5,00
2000
CW
CW
1200
18
-5,5
2,0
0,8
Nitrogen
43,8
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power
Material:
Repetition Rate
Speed
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
Mild Steel
Gas Pressure Focal Position
Tip
Stand off
Gas type
E.G.C.*
Comment
Zinc Coated
[mm] 0,6
[W] 500
[W] CW
[Hz] CW
[mm/min] 8000
[bar] 10
[mm] 0
[mm] 1,5
[mm] 0,8
Nitrogen
[Nm3/h] 14,3
0,6 1,00 1,50 2,00 3,00 4,00 8,00
1000 1000 1000 1000 1000 1000 1000
CW CW CW CW CW CW CW
CW CW CW CW CW CW CW
20000 10000 6500 3800 1700 1800 1200
10 10 17 18 17 0,3 2
0 0,0 -1,0 -1,5 -2,5 +1,0 0,0
1,5 1,5 1,5 1,5 2,0 1,5 1,5
0,8 0,8 0,8 0,8 0,8 1,0 1,0
Nitrogen Nitrogen Nitrogen Nitrogen Nitrogen Oxygen Oxygen
14,3 14,3 23,3 24,6 41,5 1,5 3,9
Zinc Coated Zinc Coated Zinc Coated
1,00 1,50 3,00 4,00
2000 2000 2000 2000
CW CW CW CW
CW CW CW CW
25000 20000 4800 1800
15 17 17 18
0,0 -1,0 -2,5 -4,0
1,5 1,5 2,0 2,0
0,8 0,8 0,8 0,6
Nitrogen Nitrogen Nitrogen Nitrogen
20,7 23,3 41,5 43,8
Zinc Coated Zinc Coated
4,00
2000
CW
CW
3100
1,5
+1,5
1,5
2,5
Oxygen
3,2
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 4
[W] 1500
[W] CW
Material:
Repetition Rate
Speed
[Hz] CW
[mm/min] 2200
Mild Steel
Gas Pressure Focal Position [bar] 0,3
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 100 mm Focussing length: 200 mm
[mm] 5
Tip
Stand off
[mm] 2
[mm] 3
Gas type
E.G.C.*
Comment
Oxygen
[Nm3/h] 2,6
D-Tip
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 10,00 15,00
[W] 2000 2000
[W] CW CW
Material:
Repetition Rate
Speed
[Hz] CW CW
[mm/min] 1100 450
Mild Steel
Gas Pressure Focal Position [bar] 0,3 0,3
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 200 mm
[mm] +1,5 +3,0
Tip
Stand off
[mm] 1,5 1,5
[mm] 0,8 1,0
Gas type
E.G.C.*
Comment
Oxygen Oxygen
[Nm3/h] 1,5 1,5
Tip 2,0 mm with D-Tip
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 0,80 2,50 5,00
[W] 2000 2000 2000
[W] CW CW CW
Material:
Repetition Rate
Speed
[Hz] CW CW CW
[mm/min] 30000 6000 1700
Brass
Gas Pressure Focal Position [bar] 10 15 15
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
[mm] 0,0 -1,5 -4,0
Tip
Stand off
[mm] 1,0 2,0 2,0
[mm] 0,8 0,8 0,8
Gas type
E.G.C.*
Comment
Nitrogen Nitrogen Nitrogen
[Nm3/h] 6,3 36,9 36,9
Speed lim. by m/c max speed
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power
Material:
Repetition Rate
Speed
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
Aluminum
Gas Pressure Focal Position
Tip
Stand off
Gas type
E.G.C.*
[mm] 0,70 1,00
[W] 1000 1000
[W] CW CW
[Hz] CW CW
[mm/min] 15000 9000
[bar] 10 10
[mm] -0,5 -1,0
[mm] 1,5 1,5
[mm] 0,8 0,8
Nitrogen Nitrogen
[Nm3/h] 14,3 14,3
1,00 2,50 4,00
2000 2000 2000
CW CW CW
CW CW CW
18000 6000 3500
15 18 18
-1,0 -2,0 -4,0
1,5 2,0 1,5
0,8 0,6 0,6
Nitrogen Nitrogen Nitrogen
20,7 43,8 24,6
Comment
Speed probably increseable
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 0,80
[W] 1000
[W] CW
Material:
Repetition Rate
Speed
[Hz] CW
[mm/min] 7000
Brass
Gas Pressure Focal Position [bar] 11
µm Fiber diameter: 100 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
[mm] -0,5
Tip
Stand off
[mm] 1,5
[mm] 0,8
Gas type
E.G.C.*
Nitrogen
[Nm3/h] 15,6
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 0,60 0,85
[W] 1000 1000
[W] CW CW
Material:
Repetition Rate
Speed
[Hz] CW CW
[mm/min] 9000 4000
Copper
Gas Pressure Focal Position [bar] 7 7
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
[mm] -1,5 -1,5
Tip
Stand off
[mm] 1,5 1,5
[mm] 0,8 0,8
Gas type
E.G.C.*
Oxygen Oxygen
[Nm3/h] 10,4 10,4
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 4,00
[W] 2000
[W] CW
Material:
Repetition Rate
Speed
[Hz] CW
[mm/min] 1200
Bronze
Gas Pressure Focal Position [bar] 10
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
[mm] -4,0
Tip
Stand off
[mm] 1,5
[mm] 0,8
Gas type
E.G.C.*
Oxygen
[Nm3/h] 14,3
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power
Material:
Repetition Rate
Speed
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
Alpacca
Gas Pressure Focal Position
Tip
Stand off
Gas type
E.G.C.*
[mm] 1,00
[W] 1000
[W] CW
[Hz] CW
[mm/min] 12000
[bar] 10
[mm] -1,0
[mm] 1,5
[mm] 0,8
Nitrogen
[Nm3/h] 14,3
3,00
2000
CW
CW
4000
18
-3,0
2,0
0,8
Nitrogen
43,8
3,00
400
2000
1000
1000
18
-3,0
2,0
0,8
Nitrogen
43,8
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
CUTTING PARAMETERS Update: 09/09/2010 Lab: IPG Photonics (Italy) Version: 1.2.1 Thickness Average Peak Power Power [mm] 0,50 1,00 1,50 2,00
[W] 400 400 400 400
[W] 2000 2000 2000 2000
Material:
Repetition Rate
Speed
[Hz] 1000 1000 1000 1000
[mm/min] 2500 1400 800 400
Silver
Gas Pressure Focal Position [bar] 6,5 6,5 6,5 6,5
µm Fiber diameter: 50 Cutting Head Precitec HP-SSL Collimating length: 75 mm Focussing length: 125 mm
[mm] -0,5 -1,0 -2,0 -2,5
Tip
Stand off
[mm] 1,5 1,5 1,5 1,5
[mm] 0,8 0,8 0,8 0,8
Gas type
E.G.C.*
Oxygen Oxygen Oxygen Oxygen
[Nm3/h] 9,7 9,7 9,7 9,7
Comment
* = Estimated Gas Consumption
The reported data must be considered only as indications of the process parameters. IPG Photonics is not responsible of the performance of the complete machine nor of eventual damages to the machine (laser included) due to wrong process parameters.
