Descripción: COMAP Manual del Operador InteliGEN-InteliSYS
Deskripsi lengkap
Full description
manual
Solutions to Calculus The Classic Edition Swokowski
megane manual 2006
Solutions to Calculus The Classic Edition SwokowskiFull description
Manual DomunioDescripción completa
peugeot 106, manual in English
Geo llaqtaDescripción completa
sistema lmi ds 350 manual
Descripción: Manual del MMPI 2 completo para poder calificar la prueba de personalidad que se aplica
Inventario de trastornos de la conducta alimentaria-3Full description
LOAD
iL
+
Power Supply
-
+ Battery
Recom mend ed CAN/RS485 con nection CAN bus connection The bus has to be terminated by 120 Ohm resistors at both ends. External units can be connected on the CAN bus line in any order, but keeping line arrangement (no tails, no star) is necessary. Standard maximum bus length is 200m Shielded cable has to be used, shielding has to be connected to PE on one side (controller side). A) For shorter distances (all network components within one room) – picture 1 Interconnect H and L; shielding connect to PE on controller side B) For longer distances (connection between rooms within one building) – picture 2 Interconnect H, L, COM; shielding connect to PE in one point C) In case of surge hazard (connection out of building in case of storm etc.) – picture 3 We recommend to use following protections: - Phoenix Contact (http://www.phoenixcontact.com): PT 5-HF-12DC-ST with PT2x2-BE (base element) - Saltek (http://www.saltek.cz): DM-012/2 R DJ Recommended data cables: BELDEN (http://www.belden.com) A) For shorter distances: 3105A Paired - EIA Industrial RS-485 PLTC/CM (1x2 conductors) B) For longer distances: 3106A Paired - EIA Industrial RS-485 PLTC/CM (1x2+1 conductors) C) In case of surge hazard: 3106A Paired - EIA Industrial RS-485 PLTC/CM (1x2+1 conductors)
RS485 connection The line has to be terminated by 120 Ohm resistors at both ends. External units can be connected on the RS485 line in any order, but keeping line arrangement (no tails, no star) is necessary. Standard maximum link length is 1000m. Shielded cable has to be used, shielding has to be connected to PE on one side (controller side). A) For shorter distances (all network components within one room) – picture 1 interconnect A and B; shielding connect to PE on controller side B) For longer distances (connection between rooms within one building) – picture 2 interconnect A, B, COM; shielding connect to PE in one point C) In case of surge hazard (connection out of building in case of storm etc.) – picture 3 NT
