CCNA 1 Practice Final Exam V4

CCNA 1 Practice Final Exam V4.0 Answers | CCNA Answers - CCN...

1 von 27

http://ccnaanswers.com/ccna-1-practice-final-exam-v4-0-answers/

CCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers, CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3 Answers, CCNA 4 Answers, CCNA v4 Answers Home About Contact VLSM Calculator CCNA Forums

Posted in CCNA 1 - Network Fundamentals (V4.0) - 23 November 2011 - 2 comments - 8,343 views 1. Which OSI layers offers reliable, connection-oriented data communication services? application presentation session transport network

2.

Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Which combination of IP address, subnet mask, and default gateway should be assigned to this host to allow it to function in the network? IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35 IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35

12.12.2011 20:06


2 von 27


IP address: 10.10.9.29 Subnet mask: 255.255.255.248 Default gateway: 10.10.9.35 IP address: 10.10.9.32 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35 IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 196.1.105.6 IP address: 10.10.9.63 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35

3.

Refer to the exhibit. What is the correct destination socket number for a web page request from Host A to the web server? 00-08-a3-b6-ce-46 198.133.219.25:80 http://www.cisco.com C 198.133.219.0/24 is directly connected, FastEthernet0/0

4.

Refer to the exhibit. How will data files get retrieved from the server?

12.12.2011 20:06


3 von 27


The client establishes a two-way connection to the server on port 21 for file transfer. From the perspective of computer A, port 21 is used to signal a push to the server, and port 20 is used to signal a pull from the server. There is a connection established to send files from the client to the server and a second connection to get files from the server to the client. Computer A establishes a connection to the server on port 21 for control and uses a second connection on port 20 to download and upload files.

5. Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.) 172.16.4.63 /26 172.16.4.129 /26 172.16.4.191 /26 172.16.4.51 /27 172.16.4.95 /27 172.16.4.221 /27

6.

Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To which network device or interface does the IP address 192.168.1.254 belong? PC Switch router interface fa0/0

12.12.2011 20:06


4 von 27


router interface fa0/1

7. How does the transport layer allow a host to maintain multiple, simultaneous communication streams across different applications? It uses error control mechanisms. It uses a connectionless protocol only for multiple simultaneous transmissions. It uses multiple Layer 2 source addresses. It uses multiple ports.

8.

Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. However, the PC is still unable to access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC to access the Internet? 192.168.1.191 192.168.1.101 192.168.1.1 192.168.1.254

9.

12.12.2011 20:06


5 von 27


Refer to the exhibit. A technician uses the nslookup command on the PC and views the output that is displayed in the exhibit. What is the IP address of the primary domain name server used by the host? 10.10.10.32 192.168.1.5 192.168.1.99 192.168.2.100

10.

Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host X to determine which intermediary device is responsible for this failure? telnet 192.168.1.1 ping 192.168.1.1 12.12.2011 20:06


6 von 27


ftp 192.168.1.1 tracert 192.168.1.1

11. In a Cisco IOS device, where is the startup-configuration file stored? Flash NVRAM RAM ROM

12. A host is transmitting a video over the network. How does the transport layer allow this host to use multiple applications to transmit other data at the same time as the video transmission? It uses error control mechanisms. It uses a connectionless protocol only for multiple simultaneous transmissions. It uses multiple Layer 2 source addresses. It uses multiple port numbers.

13.

Refer to the exhibit. Which logical topology describes the exhibited network? star ring point-to-point

12.12.2011 20:06


7 von 27


multi-access

14. A user types the enable command. What task can be performed at the privileged EXEC mode? Configure the device. Configure individual interfaces. Configure individual terminal lines. Issue show and debug commands.

15. Which type of media is immune to EMI and RFI? (Choose two.) 10 Base-T 10 Base-2 10 Base-5 100 Base-FX 100 Base TX 1000 Base LX

16.

Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using a secure connection. Which statement is true about this connection? The Telnet server process is running on PC1. Only the exchange of the Telnet username and password is encrypted. The GET request is sent to RouterA to retrieve data. The SSH service is used to connect PC1 to RouterB.

12.12.2011 20:06


8 von 27


17. Which three addresses belong to the category of private IP addresses? (Choose three.) 10.0.0.1 127.0.0.1 150.0.0.1 172.16.0.1 192.168.0.1 200.100.50.1

18.

Refer to the exhibit. On the basis of the IP configuration that is shown, what is the reason that Host A and Host B are unable to communicate outside the local network? Host A was assigned a network address. Host B was assigned a multicast address. Host A and Host B belong to different networks. The gateway address was assigned a broadcast address.

19. Which three statements are true about network layer addressing? (Choose three.) It uniquely identifies each host. It assists in forwarding packets across internetworks. It uses a logical 32-bit IPv4 address. It is not a configurable address.

12.12.2011 20:06


9 von 27


It is a physical address. It identifies the host from the first part of the address.

20. Which device should be used for routing a packet to a remote network? access switch DHCP server hub router

21.

Refer to the exhibit. What is required on host A for a network technician to create the initial configuration on Router1? an FTP client a Telnet client a terminal emulation program a web browser

22. As network administrator, what is the subnet mask that allows 510 hosts given the IP address 12.12.2011 20:06


10 von 27


172.30.0.0? 255.255.0.0 255.255.248.0 255.255.252.0 255.255.254.0 255.255.255.0 255.255.255.128

23.

Refer to the exhibit. The headers added at each layer are shown. Which layer adds the destination and source process numbers to ensure that data is delivered to the correct application? physical layer data link layer network layer transport layer

24. What is the result of using the clock rate 56000 command at the serial interface of the router? The interface is configured as a DCE device. The interface timers are cleared. The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal. The IP address for the serial interface is configured.

25.

12.12.2011 20:06


11 von 27


Refer to the exhibit. Host A uses router A as its default gateway. If host A sends an ICMP echo request to 172.16.10.0, what ICMP response will host A receive. echo reply source quench route redirection destination unreachable

26.

Refer to the exhibit. A host is using NAT to connect to the Internet. Which three IP addresses enable this connection? (Choose three.) 10.1.1.63 10.1.1.37 10.1.1.39

12.12.2011 20:06


12 von 27


10.1.1.32 10.1.1.60 10.1.1.2

27. Which OSI layer uses the header information to reassemble the data segments into streams? application layer network layer presentation layer session layer transport layer

28.

Refer to the exhibit. The diagram represents the process of sending email between clients. Select the list below that correctly identifies the component or protocol used at each numbered stage of the diagram. 1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA 1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA 1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA 1.MDA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MUA 7.POP 8.MDA 1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

29. Which three statements characterize the transport layer protocols? (Choose three.) TCP and UDP port numbers are used by application layer protocols.

12.12.2011 20:06


13 von 27


TCP uses port numbers to provide reliable transportation of IP packets. UDP uses windowing and acknowledgments for reliable transfer of data. TCP uses windowing and sequencing to provide reliable transfer of data. TCP is a connection-oriented protocol. UDP is a connectionless protocol.

30.

Examine the graphic with current configurations. Host A in the Clerical office failed and was replaced. Although a ping to 127.0.0.1 was successful, the replacement computer cannot access the company network. With proxy ARP disabled on the Fa0/0 interface of the New York router, what is the likely cause of the problem? network card failure network cables unplugged IP address incorrectly entered subnet mask incorrectly entered

31. Which fiber connector supports full-duplex Ethernet?

12.12.2011 20:06


14 von 27


32. What purpose does a hostname serve on a router? uniquely identifies a router on the internet used by routing protocols to identify peer routers provides device identification to users logging on remotely determines the hosts that are allowed to connect to the device

33. Which range of port numbers is assigned dynamically to client applications when initiating a connection to the server? 0 to 255 0 to 1023 1024 to 49151 greater than 65535

34.

Refer to the exhibit. A network technician wants to connect host A to the console of a Cisco switch to initialize the configuration. What type of cable is required for this connection? straight-through cable

12.12.2011 20:06


15 von 27


crossover cable rollover cable serial cable

35.

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A? Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130 Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2 Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1 Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130

36.

Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices? Connection 1 – rollover cable Connection 2 – straight-through cable Connection 3 – crossover cable Connection 1 – straight-through cable Connection 2 – crossover cable Connection 3 – rollover cable Connection 1 – crossover cable Connection 2 – rollover cable Connection 3 – straight-through cable Connection 1 – crossover cable Connection 2 – straight-through cable Connection 3 – rollover cable

12.12.2011 20:06


16 von 27


Connection 1 – straight-through cable Connection 2 – straight-through cable Connection 3 – straightthrough cable

37. The Layer 4 header contains which type of information to aid in the delivery of data? service port number host logical address device physical address virtual connection identifier

38.

Refer to the exhibit. The network containing router B is experiencing problems. A network associate has isolated the issue in this network to router B. What action can be preformed to correct the network issue? issue the clock rate command on interface Serial 0/0/0 issue the description command on interface Serial 0/0/1 issue the ip address command on interface FastEthernet 0/0 issue the no shutdown command on interface FastEthernet 0/1

39.

Refer to the exhibit. Which two statements describe the information that is represented in the header? (Choose two.)

12.12.2011 20:06


17 von 27


This is a server response. The UDP protocol is being used. The destination port indicates a Telnet session. The return segment will contain a source port of 23. The next session originated from the client of this session will use the source port number 13358.

40. What information is used at each hop to determine where the packet will be forwarded next? the IP packet header the incoming interface the transport layer PDU the source MAC address

41.

Refer to the exhibit. Cable 1 and cable 2 have the ends wired for specific physical layer requirements. The table lists each segment by number and the cable which has been installed by the network technician between the network components on that segment. From the data given, which segments have the correct cable installed? (Choose three.) segment1 12.12.2011 20:06


18 von 27


segment2 segment3 segment4 segment5

42. An administrator has made changes to a device. The changes did not have the desired effect. What can the administrator do to restore the configuration saved in NVRAM? Issue the erase flash command. Issue the reload command and respond no to the prompt that follows. Issue the erase start-up config command. Issue the copy running-config start-up config command.

43.

Refer to the exhibit. Which logical topology describes the exhibited network? star ring point-to-point multi-access

44. A network administrator wants to restrict access to the router privileged EXEC mode. Which password

12.12.2011 20:06


19 von 27


should the administrator use? enable aux console VTY

45.

Refer to the exhibit. Which set of devices contains only intermediary devices? A, B, D, G A, B, E, F C, D, G, I G, H, I, J

46. While configuring a router, a network technician wants to name the router. Which prompt should the technician see when entering the hostname command? Router> Router# Router(config)# Router(config-line)#

12.12.2011 20:06


20 von 27


47.

Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web server. Which client application will allow this request to be started?

12.12.2011 20:06


21 von 27


48.

Refer to the exhibit. A technician has been asked to test connectivity from PC1 to a remote network. Which action will indicate if there is remote connectivity?

12.12.2011 20:06


22 von 27


49.

Refer to the exhibit. A web browser running on host PC1 sends a request for a web page to the web server with an IP address 192.168.1.254/24. What sequence of steps will follow in order to establish the session before data can be exchanged? The session will be initiated using UDP. No additional acknowledgment will be required to establish the session. The session will be initiated using TCP. No additional acknowledgment will be required to establish the session. The session will be initiated using UDP. The returned web page will serve as an acknowledgment for session establishment. The session will be initiated using TCP. A three-way handshake must be successfully completed before the session is established.

12.12.2011 20:06


23 von 27


50. Because of a security violation, the router password must be changed. What information can be learned from these configuration entries? (Choose two.) Router(config)# line vty 0 4 Router(config-line)# password arj15 Router(config-line)# login This configuration allows users to connect by using a modem. Users must specify which line, 0 or 4, they wish to connect to when making a connection. This configuration allows users to connect to the router via the use of the telnet command. This configuration allows five users to make simultaneous connections to this router. The configured password is automatically encrypted on the router. examine the graphic with current configurations host a in the clerical office failed and was replaced although a ping to 127 0 0 1 was successful the replacement computer cannot access the company network with proxy arp disabled on the fa0/0 interface of , ccna 1 chapter 10 practice test, final exam practice ccna 1, enetwork practice final exam chapter 1answers, ccna 1 chapter 11 v4 0 answers ccna answers - ccna exam - ccna exams, refer to the exhibit a technician has been asked to test connectivity from pc1 to a remote, ccna final exam module 1 answer v4, cisco ccna 1 practice final v4 0 answers, refer to the exhibit what is the correct destination socket number for a web page request from host a to the web server?, ccna-1 final exam answer, ccna final exam diagrams, examine the graphic with current configurations, refer to the exhibit a technician has been asked to test connectivity, ccna cisco practice final exam answer, ccna networking final test practise, final exam ccna 1 with answers, how is ccna 1 final exam, ccnaanswers com/ccna-2-final-exam-v4-0-answers/c, ccna1 final exam answers complete nov 2011, enetwork practice final exam v4, ccna 2 v4 practice final exam, cnaa final exam, ccna 1 practice final v4 0 2011, ccna 1 exam networking practice final exam, practice exam ccna 1 4 0, ccna 1 v 4 practice final exam, ccna 1 v4 0 practice final, practica final ccna 1, network fundamentals pratice answers, ccna answers subnet mask, layer 4 header, ccna 1 v4 exam without connection, ip address: 10 10 9 37 subnet mask: 255 255 255 224 default gateway: 10 10 9 35, ccna enetwork practice final exam v4 0 answer, ccna v4 1 final answer, cisco 1 november 2011 ccna final exam network fundamentals version 4 0 answer, cisco 1 final test answers v4 0, ccnaanswers ccna1 practice final, ccna3 prefinal, enetwork chapter final exam practice, ccna1 practice final exam v 4, enetwork final exam november 2011, ccna1 final exam practice V4 0, ccna1 exam practice 2011, cisco network fundamentals 4 0 final chapter exam november 2011, examen ccna 1 4 0 practice, examen pre final ccna 1, ccna practive final, examen pre final ccna1, cisco v4 practice final exam, ccna network fundamentals final exam2012 answer, ciso answers, session layer, prefinal de ccna 1 v4, ccna 1 enetwork final exam 2012, answers-ccna cisco 2011, ccna 1 final exam v0 4 answer, v41 practice final exam 1-10, ccna 1 final exam answers 2011 november, the new ccna, ccn 3 final exam answers 2011, CCNA 1 - Network Fundamentals (V4 0) - 23 November 2011, ccna 1 all chapters v4 0 final exam answers 2011, ccna 1 final exam which two programs, refer exhibit nslookup primary domain name, ccna 1 final exam answers 2011 novemeber, 2012 CCNA 1, practice exam for ccna 1, ccna 1 module practice exam answers, exam tp ccna 1 version4, enetwork practice final exam v4 2011, enetwork practice final exam v4 1, topologies point à point, ciscoaswers com, what is ccna v4 0, enetwork v4 0 practice final exam answers 2011, exam ccna 1 final v4 0, cisco v4 ccna 1 final exam answer 100% 2011, exam final ccna 1 4 0, cisco routers 1 final exam practice, What is required on host A for a network technician to create the initial configuration on Router1?, exam the graphic with current configuaration host a in the clericaloffice fail and was replaced, examen ccna 1 v4 novembre, examen final ccna 1 version 4 noviembre 2011, enetwork practice final exam ccna 1 versión 4 0, enetwork chapter 9 2011 answers,

12.12.2011 20:06


24 von 27


with proxy arp disabled on the fa0/0 interface of, what purpose does a hostname serve on a router? ccna, ENetwork Chapter 2 version 4, Which logical topology describes the exhibited network?, enetwork answers to final, which logical topology describes the exhibited network? star ring, enetwork 4 practice final exam, CNNA 1 enetwork practice final exam V 4 answers 2011, what purpose does a hostname serve on a router, enetwork final exam - network fundamentals (version 4 0) final, xhibit the network containing router b is experiencing problems a network associate has isolated the issue in this network to router b what action can be pre, enetwork practice final exam ccna 1 2011 v4, enetwork practice final exam 4 0 respuestas ccna 1, enetwork practice final exam 2011 pdf Tags: CCNA 1, CCNA 1 Practice Final Exam 2011, CCNA 1 Practice Final Exam 2012, ENetwork, ENetwork Practice Final Exam, ENetwork Practice Final Exam 2011, ENetwork Practice Final Exam 2012, Network Fundamentals, Network Fundamentals Practice Final Exam, Practice 2 Responses - Add Yours+

1.

kelthuzad says: December 4, 2011 at 2:40 pm Some corrections: Q7: right answer: It uses multiple ports. Q13: right answer: point-to-point Q43: right answer: ring Reply Anon says: December 10, 2011 at 1:10 pm Question 7 is correct. Reply

Leave a Reply Name (required) Mail (will not be published) (required) Website

12.12.2011 20:06


25 von 27


Categories CCNA 1 – Network Fundamentals (V4.0) (14) CCNA 2 – Routing Protocols and Concepts (V4.0) (12) CCNA 3 – LAN Switching and Wireless (V4.0) (8) CCNA 4 – Accessing the WAN (V4.0) (12) CCNA 1 – Networking Basics (V3.1) (13) CCNA 2 – Router and Routing Basics (V3.1) (13) CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10) CCNA 4 – WAN Technologies (V3.1) (8) Tags

CCNA 1 Module 1 Answers 2010 CCNA 1 Module 2 Answers 2010

CCNA 1 Practice Final Exam Answers

CCNA 4 Final CCNA 4 Final Exam V4.0 Answers 2011 CCNA 4 Final Exam V4.0 Answers 2012 CCNA 4 Practice Final Exam Answers CCNA 2011 CCNA 2012 CCNA Answers 2011 CCNA Answers 2012 CCNA Exam 2011 CCNA Exam 2012 CCNA Exploration 1 Chapter 1 Answers CCNA

CCNA Final 2011 CCNA Final 2012

Exploration 1 Chapter 2 Answers CCNA Exploration 3 Chapter 1 Answers

CCNA Module 3 Answers CCNA Module 4 Answers CCNA Module 5 Answers CCNA Module 6 Answers CCNA Module 7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10 Answers CCNA Module CCNA Module 1 Answers

11 Answers Cisco CCNA 1 Final Exam Answers Cisco CCNA 4 Final Exam Answers Exam 2011 Exam 2012 Final Exam LAN Switching and Wireless Chapter 1 Answers LAN Switching and Wireless Final Exam Answers Network Fundamentals Chapter 1 Answers Network Fundamentals Chapter 2 Answers

Network Fundamentals Final Exam Answers

Practice

Download CCNA PDF File CCNA Tools CCNA Updated 2011 Most Views CCNA 1 Final Exam Answers 2011 - 263,069 views CCNA 3 Final Exam V4.0 Answers - 166,745 views CCNA 4 Final Exam V4.0 Answers - 161,195 views CCNA 1 Final Exam V4.0 Answers - 151,069 views CCNA 1 Chapter 2 V4.0 Answers - 112,518 views CCNA 1 Chapter 3 V4.0 Answers - 102,447 views

12.12.2011 20:06


26 von 27


CCNA 1 Chapter 11 V4.0 Answers - 99,574 views CCNA 2 Chapter 1 V4.0 Answers - 96,933 views CCNA 1 Chapter 5 V4.0 Answers - 91,431 views CCNA 2 Final Exam V4.0 Answers - 87,119 views Popular Tags ccna answers, Refer to the exhibit Interface Fa0/0 on router A is generating excessive broadcast traffic Which LAN segments will affected by the excessive broadcasts?, ccnaanswers, ccna answer, ccna 1 final exam, A network technician notes that ports Fa0/9 through Fa0/12 on a switch have been assigned to VLAN 40 VLAN 40 however was improperly named and the technician deletes it What happens to the ports that were assigned to VLAN 40?, ccnaanswers com, Which two programs can be used to accomplish terminal emulation for configuring a router from the CLI through the console port? (Choose two ), A technician makes several changes to the running configuration on a router but the desired results are not achieved The technician issues the reload command What action will be taken by the router?, ccna 1 final exam answers, ccna 1 final exam answers 2011, Refer to the exhibit After the commands are entered which password will be required to establish a Telnet session with the router?, Refer to the exhibit Which command should be issued to configure the address of the router interface that is attached to this computer?, Refer to the exhibit A technician uses the show ip route command to troubleshoot a network and receives the output that is shown What is indicated by the route that is labeled R*?, An administrator makes changes to the default configuration of a router and saves them to NVRAM After testing it is discovered that the configurations did not have the desired effect and must be removed What steps must be taken to remove the changes and r, ccna1 final exam answers 2011, A network administrator enters the enable command at the Switch> prompt of a new switch What mode will the switch enter?, Refer to the exhibit A network administrator needs to download a previously saved configuration file from the TFTP server to Switch1 Which command will accomplish this task?, Refer to the exhibit A network administrator tries to test the connectivity between routers R1 and R2 but the attempt to ping is unsuccessful Based on the show ip interface brief command outputs what could be the possible cause of the problem?, ccna1 final exam, ccna 4 final exam, ccna 2 chapter 2 answers, ccna 3 chapter 1, Refer to the exhibit The broadcast traffic from PC1 is consuming bandwidth on the interswitch trunks What should be done to prevent this from happening?, ccna 2 chapter 1 answers, ccna 3 final exam, A network administrator issued the erase nvram: command on a switch What will be the outcome of the command?, Which default EIGRP configuration must be modified to allow an EIGRP router to advertise subnets that are configured with VLSM?, ccna 4 chapter 3, Refer to the exhibit What needs to be done to allow these two routers to connect successfully?, CCNA 4 chapter 1, ccna 2 chapter 3 answers, CCNA final exam answers, During the initial configuration of a router the administrator enters the command no service config How will the router behave as a a result of this command?, ccna 3 chapter 2, ccna 1 chapter 6 answers, ccna 2 chapter 1, A network administrator is tasked with connecting two workgroups that are configured to use different subnets Which device should be selected to allow connectivity between users on the two networks?, Refer to the exhibit Host A is able to access resources on the local LAN but is unable to access any resources on the Internet What is the likely cause of this problem?, ccna 2 chapter 6, ccna 2 chapter 10, ccna 2 chapter 11, ccna 2 chapter 7, ccna 2 chapter 8, ccna 4 chapter 4, ccna 2 chapter 4 answers, ccna 1 chapter 2 answers, ccna 1 final exam 2011, Refer to the exhibit Which two switch interfaces would be RSTP edge ports? (Choose two ), ccna 1 chapter 9 answers, CCNA 2 Chapter 2, ccna chapter 5 answers, ccna 3 final exam answers 2011, CCNA1 final exam 2011, ccna 2 chapter 3, ccna 2 chapter 6 answers, ccna 3 chapter 4, ccna 3 chapter 7, ccna 1 chapter 7 answers, ccna 2 chapter 5, ccna 4 chapter 2, ccna 2 chapter 5 answers, ccna 1 chapter 10 answers, Refer to the exhibit A network technician has made several changes to R1 since the configuration has last been saved The modified configuration did not produce the desired changes The technician wants to store a backup copy of the saved configuration on a, ccna chapter 6 answers, ccna chapter 8 answers, CCNA 2 chapter 9, ccna 1 chapter 11 answers, ccna chapter 2 answers, ccna 1 chapter 4 answers, ccna 2 chapter 4, ccna 1 chapter 6, ccna 4

12.12.2011 20:06


27 von 27


chapter 5, ccna 2 chapter 7 answers, ccna 4 chapter 7, ccna 2 chapter 9 answers, ccna 2 chapter 11 answers, ccna chapter 9 answers, ccna 1 chapter 10, ccna 1 chapter 8 answers, ccna 1 chapter 11, ccna 3 chapter 5, ccna chapter 4 answers, ccna 1 chapter 7, CCNA 1 Chapter 8, CCNA 3 chapter 3, ccna 4 chapter 6, ccna 2 chapter 10 answers, ccna 3 chapter 6, A company is deciding which WAN connection type it should implement between its main office and branch offices The company wants to use a cost-effective service that provides virtual circuits between each office The company also wants to be able to transm, ccna 3 chapter 3 answers, ccna 2 chapter 8 answers, ccna 1 chapter 9, ccna 1 chapter 5 answers, ccna 4 chapter 8, CCNA 1 chapter 3 answers, ccna 1 chapter 5, CCNA chapter 3 answers, ccna chapter 11 answers, Refer to the exhibit What can be determined from the configuration of this wireless device? Recent Posts CCNA 4 Practice Final Exam V4.0 Answers CCNA 1 Practice Final Exam V4.0 Answers CCNA 4 Final Exam CCNA 4 Final Exam Answers 2011 CCNA 1 Final Exam Answers 2011 Recent Comments jeffrey on CCNA 2 Chapter 7 V4.0 Answers Anon on CCNA 1 Practice Final Exam V4.0 Answers Boyet on CCNA 2 Chapter 2 V4.0 Answers Loi on CCNA 4 Practice Final Exam V4.0 Answers yk on CCNA 4 Practice Final Exam V4.0 Answers Directories

Rate My Blog

Copyright © 2011 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).

12.12.2011 20:06

CCNA 1 Practice Final Exam V4

Recommend Documents