Coolants Health and Safety Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin or respiratory irritation. Always observe good hygiene measures. Read and understand that Material Safety Data Sheet (MSDS) before using this product. For a copy of the MSDS, visit us on the web at www.catmds.com.
Cat ELC™ Recommended Recommended Use • Cat ELC meets meets or exceeds exceeds the requireme requirements nts of the following following specifications and guidelines: – Cat EC-1 EC-1 – ASTM D-3306 D-3306 – ASTM-6210 ASTM-6210 – TMC RP-329 RP-329 – TMC RP-338 RP-338 – SAE J1034 J1034
Discover the Difference • Cat ELC is developed, developed, tested and approved by Caterpillar to meet the same same high standards as as all genuine Cat parts. • Factory-Fil Factory-Filll - Used Used as standar standard d • Lower Maintenance Maintenance Costs-Reduces engine coolant. coolant. CAT CAT ELC eliminates the need for supplemental supplemental coolant addi tives, extends coolant change-out intervals and reduces disposal requirements. • Advanced Metal Metal Protection - Incorporates Incorporates an advanced formula formula technology with with organic acid additive additive corrosion inhibitors, such as a combination of mono and dicaboxylates for maximum protection of copper, solder, brass, steel, cast iron and aluminum. Typical Characteristics(1) Color
Strawberry Red Boiling protection with 15 psi (1 bar) radiator cap
50% Cat ELC/50% water 129°C (265°F) 60% 60% Cat Cat ELC/ ELC/40 40% % wate waterr (ELC (ELC conc concen entr trat ate e adde added) d) 132°C 132°C (270 (270°F °F)) Freezing protection
1
50% Cat ELC/50% water 60% 60% Cat Cat ELC/ ELC/40 40% % wate waterr (ELC (ELC conc concen entr trat ate e adde added) d) Nitrite (50% solution)
-37°C -52° -52°C C (°62F (°62F)) 500 ppm
Molybdate (50% solution)
530 ppm
The values values shown are typical typical values and should should not be be used as quality quality control parameters parameters to either either accept accept or reject reject product. product. Specific Specificaa tions are subject to change without notice.
221
Coolants Cat ELC™ (Cont'd.) English Volume (gal)
Metric Volume (L)
— —
4 5 —
Part Distribution Region Number Cat ELC Concentrate (with embitterment) 365-8394 Asia Pacific Europe, Africa, Middle East 205-6615 North America and Latin America excluding Brazil 238-8647
4 18 200 1000 —
Cat ELC Premix 50/50 (with embitterment) 365-8395 Asia Pacific 365-8396 Asia Pacific 365-8397 Asia Pacific 365-8398 Asia Pacific North America and Latin America excluding Brazil 361-1024
1 — — — — 275 — — — 1
200 4 20 —
5
215-4242 215-4245 215-4246 238-8648
Brazil Brazil Brazil North America and Latin America excluding Brazil
—
238-8649
North America and Latin America excluding Brazil
55 —
—
238-8650
North America and Latin America excluding Brazil
5
205-6611
Europe, Africa, Middle East
—
20
205-6612
Europe, Africa, Middle East
—
210
205-6613
Europe, Africa, Middle East
—
1000
205-6614
Europe. Africa, Middle East
Cat ELI Recommended Use • Inhibitor concentrate based on Cat • For use in generator sets, industrial engines and marine engines that do not require freeze protection Discover the Difference • Corrosion protection, like Cat ELC, only without glycol • Extended drain interval and little maintenance makes and excellent alternative to conventional supplement coolant additives with water. • Lower total owning and operating costs compared to water and SCA because of the extended drain interval and limited maintenance of Cat ELC
222
English Volume (gal)
Metric Volume (L)
1 —
— 1000
366-2753
—
20
351-9432
Latin America, Australia and North America Worldwide except Europe, Africa, Middle East
—
208
351-9433
Worldwide except Europe, Africa, Middle East
Part Distribution Region Number Cat ELI Concentrate Worldwide except Europe, Africa, Middle East 351-9431