Descripción: La cianuración es un proceso que se aplica al tratamiento de las menas de oro, desde hace muchos años. Se basa en que el oro nativo, plata o distintas aleaciones entre estos, son solubles en soluci...
nanotechnology
Full description
Full description
the test method for determining the carbon residue of a petroleum product standard test method for carbon residue ASTMFull description
carbon residue experimentFull description
Kapal FiberDeskripsi lengkap
fibre bonding and paper making
Single Fiber
Fiber PosterDescripción completa
FIBER OPTIC COMMUNICATION SYSTEMS
Deskripsi lengkap
Single Fiber
neps generation and fiber rupture control paper
Full description
Epoxy/HS carbon fiber, UD composite, quasi-isotropic laminate General properties Designation High Strength Carbon Fiber/Epoxy Composite, Quasi-isotropic Laminate [0/+45/-45/90]s Density Price Tradenames Cycom; Fiberdux; Scotchply
1.55e3 * 30 30.7
-
1.58e3 33.7
kg/m^3 EUR/kg
Composition overview Composition (summary (summary)) Epoxy + Carbon fiber reinforcement Base Polymer class Polymer type % filler Filler type
Polymer Thermoset EP 65 - 70 Carbon fiber
%
Composition detail Polymer Carbon (fiber)
30 65
-
35 70
% %
Mechanical properties Young's modulus Compressive modulus Flexural modulus Shear modulus Bulk modulu modulus s Poisson's ratio Shape factor Yield strength (elastic limit) Tensile strength Compressive Comp ressive strength Flexural strength (modulus of rupture) Elongation Hardne Har dness ss - Vickers Vic kers Hardne Har dness ss - Rockwell M Hardne Har dness ss - Rockwell R Fatigue strength at 10^7 cycles Fracture toughness Mechanical loss coefficient (tan delta)
Impact properties Impact Im pact st strength, rength, notc notched hed 23 °C
Thermal properties Glass temperature Heat deflection temperature 0.45MPa Heat deflection temperature 1.8MPa Maximum service s ervice temper t emperature ature Minimum service s ervice temper t emperature ature Thermal Ther mal conductivity conductivit y Specific heat capacity Thermal Ther mal expansion c oefficient
* * * * * * *
Electrical proper properties ties Electricall re Electrica resistivity sistivity
No warranty is gi ven for the accuracy of this this data. Values marked * are estimates. estimates.
Page 1 of 3
Epoxy/HS carbon fiber, UD composite, quasi-isotropic laminate Optical properties Transparency
Opaque
Absorption, permeability Water absorption @ 24 hrs
* 0.036
-
0.0525
%
Durability: flammability Flammability
Slow-burning
Durability: fluids and sunlight Water (fresh) Water (salt) Weak acids Strong acids Weak alkalis Strong alkalis Organic solvents UV radiation (sunlight) Oxidation at 500C
Excellent Excellent Acceptable Unacceptable Limited use Excellent Limited use Good Unacceptable
Primary material production: energy, CO2 and water Embodied energy, primary production CO2 footprint, primary production Water usage
259 16.4 361
-
286 18.1 1.37e3
MJ/kg kg/kg l/kg
* 11.3 * 18.4
-
12.4 20.3
MJ/kg MJ/kg
* 0.901 * 1.48
-
0.994 1.63
kg/kg kg/kg
Material processing: energy Simple composite molding energy Advanced composite molding energy
Material processing: CO2 footprint Simple composite molding CO2 Advanced composite molding CO2
Material recycling: energy, CO2 and recycle fraction Recycle Recycle fraction in current supply Downcycle Combust for energy recovery Heat of combustion (net) Combustion CO2 Landfill Biodegrade A renewable resource?
0.1
* 31.3 * 3.17
%
-
32.9 3.33
MJ/kg kg/kg
Notes Typical uses Lightweight structural members in aerospace, ground transport and sporting goods; springs; pressure vessels. Other notes Properties relate to autoclave produced components, fiber volume fraction nominally 0.55 - 0.65 Reference sources Data compiled from multiple sources. See links to the References table.
Links ProcessUniverse Producers Reference No warranty is gi ven for the accuracy of this data. Values marked * are estimates.
Page 2 of 3
Epoxy/HS carbon fiber, UD composite, quasi-isotropic laminate Shape
No warranty is gi ven for the accuracy of this data. Values marked * are estimates.