Apa itu model Disiplin Asertif Canter Apakah konsep utama Model ini. Jenis-jenis guru. Guru yang agresif Guru yang tidak asertif Guru yang asertif Langkah-langkah pelan disiplin asertif Hier...Full description
bdgztghmkgvdss
Full description
Descripción: Vehicle specifications
Descripción: EIA - Larry W. Canter Canter-EIA Examen Eia Enlace (4)
No communications can be made with Multi-Use Tester II.
Normal code output after erasure Identify cause for diagnostic trouble code issue and rectify. *2
Driving test
Check for transient troubles
If no communications can be made with all the other systems, it is highly likely that the diagnostic circuit is faulty. If no communications can be made with this system only, an open circuit in the diagnostic output circuit or power supply circuit (including the ground circuit) of this system is suspected.
If the same diagnostic trouble code is issued during test driving, reexamine the cause for the diagnostic trouble code issue and rectify.*2 • If none of the diagnostic trouble codes stored in the engine control unit before the test driving is issued, perform the checks on transient troubles in addition to the checks based on the diagnostic trouble codes.
C01 C01 Water temperature sensor (Connects to engine electronic control unit) C02 Sub control rack position sensor C03 Pre-stroke actuator C04 Boost pressure sensor C05 Control rack position sensor, Linera DC motor, Backup engine speed sensor C06 Starter C07 Engine speed sensor