Blinding and Isolation for MaintenanceDescription complète
Method
Method
Descrição completa
Descripción completa
an ever increasing list of chemical terms
an ever increasing list of chemical termsDescripción completa
Poetry maggie and milly and molly and may ee cummings analysis form & technique
formal writingDescripción completa
Through an email conversation between Allen, Forst and Haugaard, this article explores the relationship between the dyads power and reason, justice and domination. In much of the literature reason ...
industrial engineering
Full description
sources onlyFull description
none
Expectations of class and gender within the fixed social structure of the Regency Period.
Full description
ABB Synchronizing and paralleling devices and systems
Project:
JOB SAFET ANALYSIS
Company Logo
Ref No.: Rev No.:
Blinding and De-blinding
Page:
Prepared by:
Reviewed by:
Approved by:
Date:
Step No.
Job Steps
Hazards
1
Work start-up & obtaining PTW
Unauthorized work
Conflicting activities
Invalid permit
Lack of competency
Lack or poor communication
Haste or shortcut
2
•
Blinding & DeBlinding
• •
Falling Objects. Injury.
Control Measures/ Preventive Measures A certified PTW applicant shall obtain PTW from the concerned authorities Make sure that there are no conflicting activities near the worksite before starting the job Get the permit validated for the specific day Supervisor must ensure that all work activities are carried out by competent personnel Conduct Toolbox meeting, review the Method statement and Job safety analysis to all craftsmen involved in the work activities. Responsible person will conduct inspection, monitor the work activities and have to ensure safety standards and procedures are strictly adhered to. Make sure everybody is wearing proper PPE. Ensure the use of rated Blinds. Tools used must be appropriate for the job Use proper lifting practices
1 of 3
Responsible PTW applicant Supervisor PTW holder
Supervisor
Project:
JOB SAFET ANALYSIS
Company Logo
Ref No.: Rev No.:
Blinding and De-blinding
Step No.
Job Steps
Page:
Hazards
•
Handling Heavy Objects.
•
Toxic Gas.
•
Flammable Gas.
3
•
Fit-up
•
Sharp Objects.
•
Falling Objects.
•
Injury.
•
Fall from Heights.
•
4
•
Boxing up & Normalising
• • •
Congestion Falling Objects. Injury. Fall from Heights.
• • • • •
Control Measures/ Preventive Measures A single person shall not carry more than 20 KG Protect hands when using bars. Consider bar slipping, pinch points. Bend the knees slightly, one foot in front of the other. Conduct gas test before & during the activity if required by the PTW
Use breathing Apparatus for Blinding. Control of ignition sources etc., hand tools. Continuous gas monitoring. Handling of Gaskets (sharp edges) as per procedure. Proper PPE. Proper tools. Certified Scaffolding. Deployment of exp personnel. Certified Riggers. Certified Lifting Personnel.
Essential personnel only at worksite. Proper PPE. Proper tools. Certified Scaffolding. Deployment of exp personnel.
2 of 3
Responsible
JOB SAFET ANALYSIS
Company Logo
Project: Ref No.:
Blinding and De-blinding
Step No.
Job Steps
Congestion
Page:
•
Control Measures/ Preventive Measures Certified Riggers. Certified Lifting Personnel.