Application Software Manual
Contents Before Use ………… 1 Installation ………… 2 Start
……………… 3
New Registration …… 4 Viewing Records …… 5 Options
…………… 7
Uninstllation………… 8 Troubleshooting …… 9
Before Use Please read carefully before use. 1 ) Copyright of this software is the property of TANITA Corporation. 2 ) Please use this software and the instruction manual under the conditions described in the License Agreement of this product. 3 ) Reproduction of this software or instruction is not allowed. 4 ) We do not bear any responsibility arising from the use of this software if the software has been revised or modified. 5 ) The specification of this software and the contents described in the instruction manual are subject to change without any prior notice in the future. 6 ) Please note that images in the instruction manual may differ from those used in the software. 7 ) Please do not operate other files and/or applications while this software is running. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the USA and other countries. In this manual, Microsoft® Windows® XP Operating system English version is indicated as Windows XP and Microsoft Windows Vista™ Operating system English version is indicated as Windows Vista. Microsoft Windows 7 Operating system English version is indicated as Windows 7.
Operating Environment Corresponding PC ……………………………… PC/AT compatible machine System Configuration …………………………… Microsoft WindowsXP, Vista, or 7( Not Not compatible with 64 bit version ) ………………………………………… Memory Greater than the recommended memory capacity Hard Disk Free Space …………………………… 20MB or more Display Resolution ……………………………… 1,024 X 768 dots or more ( recommended recommended ) …………………………………… Disk Device SD Drive User Account Administrator or Power User * All the messages in the enclosed software are in English.
Notes: 1 ) When handling the card, follow the instructions in the instruction manual for the memory card. 2 ) There is a write-protection notch on the memory card. Always unlock it when using the scale and the application. 3 ) Avoid using or storing the memory card in the places listed below. Doing so may destroy data in the memory card. * Hot and humid or corrosive places * Places where strong static electricity or electromagnetic waves are generated 4 ) When inserting or removing the memory card, do not touch the contact face directly. 5 ) While the equipment is transferring data to the memory card, do not remove the memory card from the equipment or do not shut down the power. Doing so may destroy the data in the memory card or cause a breakdown of the SD card interface. 6 ) Only insert specified memory cards into the memory card slot. Insertion of other objects may result in a breakdown. 7 ) When the equipment is used for long hours, the removed memory card may be warm. This is normal. 8 ) The memory card has a limited life. As the memory card is used over a period of time, saving, reading, or data functions may fail. In that case, replace with a new memory card. 9 ) Please note that we will never bear any responsibilities for the loss or corruption of data of the contents stored in the memory card.
How to Insert/ Remove the Memory Card Insert the Memory Card Insert the memory card into the slot in the direction as shown before the equipment is turned on. If you insert the memory card while weighing, the data cannot be stored.
•
How to Insert/ Remove the Memory Card Removal of the Memory Card Before removing the memory card, confirm that is not displayed. 1. To remove, push the memory card in further. 2. Pinch the portion that has come out with the thumb and index finger and remove.
• •
1
Installation Please take following steps before you start installation. Refer to the Operating Environment and confirm that all conditions are met Make sure that your operating system is working properly. Set your computer clock. Turn off the virus checking software and screensaver until the instructions are finished.
1.Insert the SD memory card into the card slot of your computer. Start installation by double clicking on “setup.exe”. “setup.exe”.
2.Read through the license agreement, and choose “agree” if you agree to the terms and conditions. conditions. Then, click “Next”. “Next” .
3.The application will be installed to the registry ( C:\TANITACorporation\Bodyvision\ C:\TANITACorporation\Bodyvision\ ) unless you specify otherwise. Click‚ “Next”. “Next” .
4.Click on “Install” to start the installation. The installation is complete when the left screen is displayed. Click on “Finish” to exit the instration. For Windows 7 or Vista users User Account Control will ask you if you allow the application to access the computer. Make sure if the application is Bodyvision, and click “YES” or “Allow” “Allow” .
2
Start Double click the icon shown on your desktop or installed folder.
Start screen
1. Start Choose your registration number to view your measurement data on graphs. You need to complete User Registration in advance.
2. New Registration Register your personal information when you use this application for the first time. Complete personal settings and measurements with the Body Composition Monitor in advance, and have the SD memory card inserted to your computer.
3. Change registration Correct or modify your registered data. Choose the registration number which you wish to correct, and and enter new information. You can only change “Name”,“Physical “Name”,“Physical Activity Level”,“Password”.
4. Delete registration Registration screen
To delete your registration. Choose the registration number, and click “Delete”. You need to have your SD memory memory card inserted into your computer. computer. Note: The application CANNOT CANNOT recover any deleted data. Note: You must delete registration on the application first when you delete the registration on the body composition monitor.
5. Exit Exit the application
6. Link Link to the Tanita world wide website
7. Version information The version of this application
3
New Registration 1.Insert your SD memory card into your computer and click “New Registration” on the start screen. Choose the same number that you chose with the body composition monitor.
Registration
Confirmation
2.Enter your name and physical activity level, and click “Next” . Click “Finish” to complete the registration. The screen will go back to the start screen.
What is Physical Activity Level? Physical Activity Level indicates the intensity of physical activity in your everyday life. Read the description on the registrationscreen, and choose a level most appropriate to you. Password Password setting is NOT mandatory. You can protect your personal information information and recorded data from others. To set the password, tick the box and and enter a password and keyword. Keyword is a password reminder. Please be advised the registration number is no longer used if both the password and keyword are lost. It is strongly recommended recommended to write down your keyword and keep it for reference.
Obtain Data 3.Click “Start” on the initial screen. To obtain your measured data, click “Obtain data” on the screen. Your measurement data in the SD memory card will be transferred to the application. You need nee d to obtain ob tain data da ta every ever y time you transfer tran sfer your yo ur measurement meas urement data taken with the Body Composition Monitor to the application. The obtained data is not deleted from the SD memory card.
4
Viewing Records The obtained measurement data is shown on a graph. Measurement data Your measureme meas urement nt data da ta is i s displaye dis playedd on a graph in this section. Latest record is shown on the right. You Yo u c an compa co mpa re prev pr evio ious us recor re cor ds with your latest record by clicking.Only one record is stored per day. Latest record The latest record is always displayed on the right. Details Figures of each record are displayed in the balloon by placing the pointer on. “memo” indicates the selected record has a note. Figures You Yo u can ca n compa co mpa re the th e late la test st reco re cord rd with selected record.
Choosing segments and items to be shown Choosing items Click items to show the graph of selected item. Choosing segments Click the arrows on Muscle mass and Body fat, and select a segment from the list.
Changing the display method Display term You can select the term of the graph graph from “Daily”, “Daily” ,“Week average” ,“Month “Month average” ,“Weekly average” by clicking each button.
Viewing details
Details
Display term You can view the details of each record by right clicking.
You can ca n leave leav e notes note s about abou t the detail d etailss of the mea ls or exercise exerci se on the selected date.
5
Viewing Records Choosing the display date You can specify the display date date by clicking the date field. Back
Forward
Show the past data
Latest
Back
Forward
Specify a date
Zoom-in/Zoom-out Magnify or minimize the graph. graph. You can modify the display width width by changing Zoom-in setting. For the details, see P.7. Zoom-in
Zoom-out
Bar chart
Line chart
Line chart/ Bar chart Change the display method.
Print Printout the graph or data table.
6
Options With the option feature, you can manage your records, change settings settings or use useful feature to help your health management. Goal setting You can set the target value of the weight and body fat percentage. Enter your desired values in the fields. The target value is displayed with a red line on the graph.
Target Value
Note: Excessive weight loss may harm your health. health. Recommended value value is automatically calculated based on standard values or your physique. Zoom-in display setting You can change ch ange the width of one division divi sion of the graph grap h and the display position positio n in zoom-in display.
Magnify or minimize the graph. You can modify the display width width by changing Zoom-in Zoom-in setting. Correction of registration details Correct or modify your registered data. You can only change “Name”, “Name” ,“Physical Activity Level”, “Password”. “Password”. Delete add or modify record data Only one record is stored per day. You You can add , delete or modify record manually with this feature. Add records and modify Add records Choose a record, and click “Add”. A blank record will be added as the record of the previous date. If you choose the latest record, record of the day after the latest is added. Enter values for each items, and press Enter to determine.
Delete records Choose application or SD memory card where the records you want to delete is stored. To delete a record, choose a record and click “Delete” . Note:You need to have your SD memory card inserted to delete records stored in the media. Output recorded data The application can generate CSV format format data file that can be edited with spreadsheet software. Indicate the period to be output, and click “Write data” to indicate the location to save the file. Setting for changing unit You can change the display units units for weight, height, and calorie.
7
Uninstallation 1.Insert the SD memory card into the card slot of your computer. Open the Tanita Tanita folder and double click “setup.exe” to start installation.
2.The screen shown on the left is displayed. Select “Remove” and click “Next”.
For Windows 7 or Vista users User Account Control will ask you if you allow the application to access the computer. Make sure if the application is Bodyvision, and click “YES” or “Allow” “Allow” .
3.If you created the short cut icon yourself, delete the icon as well.
4.Delete “Bodyvision” folder in the installed “TANITA Corporation” folder. Now the application is uninstalled.
8
Troubleshooting Error message “Memory cartridge has not been connected” is displayed. Make sure if SD memory card is inserted to your computer and detected by the computer.
Failed to obtain data from the SD memory card Have you finished user settings and taken measurements with the Body Composition Monitor? Are personal settings and measurement data stored in the SD memory card? card?
Cannot click the registration number. (When you start, or modify user registration,) Have you finished user registration with the application?
Forgot the keyword (password reminder) The registration number cannot be used any longer. If you forget your password, register your information in a new registration number.
Error message “Please “Please check user profile for errors. To change user return to top and cancel registration” is displayed. Error message “Please check user profile for errors. To change user return to top and cancel registration” is displayed.
9