-append ide_generic.probe_mask=0x01 ide_core.chs=0.0:980,16,32 auto nousb console=ttyS0,9600 console=ttyS0,9600 bigphysarea=65536 bigphysarea=65536
To run two ASAs, use following f ollowing Qemu: Qemu Options: -vnc :2 none -vga none -m 1024 -icount auto -hdachs 980,16,32
3. Start a new new Porject Porject in GNS3 GNS3 and drag/dro drag/drop p a ASA (8.4) (8.4) firewall firewall to the the topology. topology.
Here, My_PC uses MSLoopback adapter. Configure IP of loopback adapter as 192.168.30.2 with subnet mask 255.255.255.0. 255.255.255.0.
4. Now start all devices in GNS3 and use following commands on the firewall to give an IP. Ciscoasa> enable ciscoasa# configure terminal ciscoasa(config)# interface gigabitEthernet 1 ciscoasa(config-if)# ip address 192.168.30.1 255.255.255.0 ciscoasa(config-if)# nameif management // or “inside” ciscoasa(config-if)# no shutdown 5. Now PC is ready to talk to firewall, let’s try. ciscoasa# ping 192.168.30.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.30.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/6/20 ms ciscoasa# 6. The next step is to copy ASDM to Firewall. If already have TFTP Server is installed, cool otherwise Download and start the TFTP Application:
7. Download ASDM from Cisco website. I have ASDM 6.4(7) downloaded. 8. On the TFTP application browse to the folder where you have downloaded ASDM (here i.e. C:\Root). 9. On the firewall use following command to download TFTP Image: ciscoasa# copy tftp flash Address or name of remote host []? 192.168.30.2 Source filename []? asdm-647.bin Destination filename [asdm-647.bin]? Accessing tftp://10.10.10.2/asdm647.bin… !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ———–Output Omited—————– Writing current ASDM file disk0:/asdm-647.bin !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ———–Output Omited—————– 17902288 bytes copied in 56.500 secs (319683 bytes/sec) ciscoasa# 10. Set the Firewall to Load the ASDM at next reboot and also identify the management Station IP address ciscoasa# sh flash –#– –length– —–date/time—— path 2 4096 Mar 05 2012 13:40:42 log 9 4096 Mar 05 2012 13:40:47 coredumpinfo 10 59 Mar 05 2012 13:40:47 coredumpinfo/coredump.cfg 11 196 Mar 05 2012 13:40:47 upgrade_startup_errors_20120305 upgrade_startup_errors_201203051340.log 1340.log 12 17902288 Mar 05 2012 14:00:48 asdm-647.bin 268136448 bytes total (250191872 bytes free) ciscoasa# config t ciscoasa(config)# http server enable cisc ciscoa oasa sa(c (con onfi fig) g)# # htt http p 192. 192.16 168. 8.30 30.2 .2 255. 255.25 255. 5.25 255. 5.25 255 5 mana manage geme ment nt ciscoasa(config)# asdm image flash:asdm-647.bin ciscoasa(config)# username cisco password cisco privilege 15
// or “ins “insid ide” e”
11. Use ‘wr mem’ or ‘copy running-config startup-config’command and then reload the firewall using 'reload' command 12. Launch browser and go to https://192.168.30.1 https://192.168.30.1 (Disable Proxy if i f you are using any). a ny). Continue with ‘Run ASDM’.
Next, Open with > OK
Continue clicking ‘Later’
Click Yes
Give username and password (here: both are cisco).
Once the firewall is up and running use following activation keys:
