50kw solar rooftop Survey Report.pdf

50 kW SOLAR PV BASED GRID TIE POWER PLANT

SURVEY REPORT

Al-Falah University

Ref: SEI/SPV/50/01/180516

Date: 02 Jan 2016

Dear Sir,

Sub: Survey report for 50KWp Roof Top Solar Power Plant

We enclose the following documents for your kind consideration and reference.

1. Executive summary 2. Benefits of the projects 3. Details of the Projects 4. Expected Annual Energy Generation 5. Technical specification and bill of materials 6. Block diagram of the power plant 7. Scope of work a. Design work b. Installation work 8. Clint Scope

PH: +91 75033 25402

2

Email: [email protected]

1. Executive Summary Al-Falah University is an endeavour of Al-Falah Charitable Trust, in keeping up with its tradition of fostering professional education, training and guidance. Spread over 56 acres of lush greenery, Al-Falah University offers world-class education to students from India and other countries by providing a learning experience designed to develop intellectual abilities as well as good social, moral and ethical values. The university is committed to providing a rigorous academic environment to equip students with knowledge, skills, insights, attitudes and practical experience in order to enable them to become discerning citizens. The emphasis by the university is placed on nurturing talent by providing need-based education to create a resource pool for developing cutting edge technologies for the benefit of the country. We believe that this pool of immense talent would enrich the national fabric and shall act as a driving force for transforming India into a great nation. Our curricula and teaching methods are rigorous, innovative and distinctly oriented towards competitiveness, keeping an eye on global environment of business, industry and academia. A distinct feature of our academic programme is the focus on the industrial needs of the country. India is endowed with vast solar energy potential. About 5,000 trillion kWh per year energy is incident over India’s land area with most parts receiving 4 -7 kWh per sq. m per day. Hence both technology routes for conversion of solar radiation into heat and electricity, namely, solar thermal and solar photovoltaic’s, can effectively be harnessed providing huge scalability for solar in India.

PH: +91 75033 25402

3


2. Benefits of the projects

The Project will provide green solar power to the university and will share the load requirements in synchronization with the Grid. Directly, the project is expected to generate around 67,110 Units and reduce the Electricity Charges incurred by the Beneficiary Organization and also the diesel consumption. We can avoid the 40.06 tons1 of the CO2 by using of this power plant in a year.

3. Details of the Project Project site: Al-Falah University Admin Building and Mechanical building

Proposed capacity of the SPV Power Plant (KWp): 50KWp Availability of shadow free south facing area for the power plant: More than 1100 Sq. m shade free area on rooftops of the building is available.

1

Calculation based on the 0.597kg/kwh.

PH: +91 75033 25402

4


4. Expected Annual Energy Generation

Months

Units Generated

January

5250

February

5400

March

5550

April

6000

May

6000

June

6000

July

5940

August

5925

September

5745

October

5400

November

5100

December

4800

Yearly

67,110

Note: Energy production projections are reasonably accurate estimates based on site’s solar data and our experience with similar systems. No guarantees as to actual production output from this system. Grid/Load Interfacing Solar system output shall be connected to a suitable load bus capable of taking the input. This input point shall be selected in field in consultation with client’s Executive Engineer.

PH: +91 75033 25402

5


5. Technical Specification and Bill of material

Description a Solar Panels

System Components Details b Quantity: 200 Wattage: 250Wp / 260Wp No. of Cells: 60 Voc: 37.1 V Isc: 8.28 A Vmp: 29.6 V Imp: 7.6 A Dimensions: 1660X990X42 (mm) Weight: 20 kg Operating Conditions: -40 to +90 C Maximum System Voltage: 1000 Vdc

Inverter Quantity: 1 or 2 AC maximum output: 50 KWp MPP voltage range : 360 – 800 V Maximum current input DC/String : 15A Maximum efficiency : >98.1% Power connection : 3-phase

Remark c

As per Clint requirement

We may take any other reputed make with efficiency > 95%. Mounting Structures

PH: +91 75033 25402

Panels shall be mounted on galvanized Accurate degree of frames inclined at 28 degrees to the inclined of the solar south. The structure is designed in module will be such a manner that module can be design after survey replaced easily and in line with site of site and collected requirements and it is easy to install the cordinated of the and service in future. The frames will site. be supported by angle legs of suitable lengths to provide the pre-determined inclination. All fasteners, nut and bolts are made of Stainless steel - SS 304. The structures shall be pre engineered to meet special requirements of placing the modules on the corrugated rooftops.

6


Foundation Base

The legs of the structures made with GI square pipe with base plate with suitable hole and foundation bolts grouted in the RCC foundation columns made with 1:2:4 cement concrete.

Electrical Accessories

Cables will conform to IS 694 and shall be of 1.1 kV grade. Interconnections, DCDB to PCU etc will be selected to keep voltage drop and losses to the minimum. The bright annealed 99.97% pure bare copper conductors offer low conductor resistance, 4/6sqmm, TUV certified cable used for the connection of array to junction boxes, junction boxes to DCDB Working voltage: up to 1100 V Temperature range: -15 deg C to +70 deg C Sizes: Suitable sizes Color codes: Red, Yellow, Black, Blue, Green

Battery

None

Energy Meter

The Inverter shall have a built-in meter that tracks energy production and displays it on a small LED screen. The display can be used to determine realtime production, daily production. For more sophisticated analysis and visual data management, Solar Access modules can be included.

Array Junction Box

Number of string after Design IP 65 Protection SPD 1000V DC 10 Amp Fuse per string DC disconnected switch TUV Certified

Remote Monitoring System

The remote monitoring system continuously records and stores all available data of number of inverters in real time.

PH: +91 75033 25402

7

Optional


Solar Power Plant BOM Sr. No.

DESCRIPTION OF ITEM

Unit

Solar Module - polycrystalline (250Wp)

Nos

2.0

Grid connected Inverter 50KWp

Nos.

2.1

Remote monitoring system

Nos.

2.2

Weather sensor

Nos.

2.3

Irradiation sensor

Nos.

AJB

Nos

1

3 4 5 6 7

4 sq.mm/6sq.mm x 1C PVC Cu. Conductor Cable for PV Module to AJB Structure - (Module Mounting Arrangement) 4C x 35 sq. mm. XLPE Insulation Al Conductor GI Armoured Cable (From Inverter to ACDB ) Earthing with G.I. 40mm dia pipe including accessories

QTY.

Remark

200.00 1.00 1.00 1.00 1.00

Optional Optional

2.00

mtr. As per design Set

As per design

Mtr As per design set

8

Connectors

Nos.

9

ACDB

Nos.

10

Fittings ( PVC Pipe, flexible pipe, cable tie, lugs, anchor fastener etc)

Lot

11

Earthing G.I. strip of 40mm x 5 mm

Mtr.

12

Cable tray

Mtr.

13

Lightning arrester

set

7.00 As per design 1.00 As per design As per structure design 10.00 1.00

Note: a. Sensors are the optional we can avoid to be use these devise. b. Lightning arrester can also be avoided in case of already having lightning arrester on the building and cover the entire area of roof where we plan to install the solar modules.

PH: +91 75033 25402

8


6. Block diagram of the solar power plant

Fig 1: Block Diagram of the solar pv power plant

PH: +91 75033 25402

9


7. Scope of wok 1. Design Work

a. Civil design: - structure foundation design, Layout plan of site etc.

Fig 2: Reference drawing of the layout of the panels.

PH: +91 75033 25402

10


b. Solar Module mounting Structure design: -

i. Structure design at a certain angle as per latitude of the site. ii. Structure design to withstand of horizontal wind speed of 150Kms/h. iii. Structure shading calculation in PVSyst Software.

Fig 3: Reference drawing of the solar module structure.

PH: +91 75033 25402

11


c. Electrical Design: i. ii. iii. iv.

Single line diagram of the plant. Solar module string design Power Plant simulation in PVsyst Software. Sun path and irradiation calculation of the site coordinates for estimated generation of the power plants. v. AC and DC wiring design and connection diagram.

Fig 4: PVsyst Software Report for the Power Plant.

PH: +91 75033 25402

12


Fig 5: PVsyst Software report for Sun Horizon definition

Fig 6: PVsyst Software report for Shading calculation

PH: +91 75033 25402

13


Fig 7: PVsyst Software Main result of the Power Plant generation

Note: Fig 4, 5, 6 &7 are the PVsyst Software Reports only for your references.

PH: +91 75033 25402

14


2. Installation Work

a. Area required: The total area required for the system installation shall be apx 500 – 600 Sq meter, without any shades, true south facing. b. Structure Anchoring: Panels shall be mounted on galvanized frames inclined at 28 degrees to the south. The structure is designed in such a manner that module can be replaced easily and in line with site requirements and it is easy to install and service in future. The frames will be supported by angle legs of suitable lengths to provide the pre-determined inclination. All fasteners, nut and bolts are made of Stainless steel - SS 304. c. Foundation Base: The legs of the structures made with GI square pipe and nut bolted on the foundation bolts in the RCC foundation columns made with 1:2:4 cement concrete. Actual frame and other structural dimensions will be determined during a more detailed site visit by specialists during full design phase. d. Inverter installation: Based on the initial site visit, the inverters could possibly be installed on the terrace. This space provides ample accessibility and good air circulation. The inverter is available in IP54 housing; however, an enclosed space has to be provided for the same. Actual installation location and methods will be determined during full design phase. e. Electrical: Proposed fire hose shaft will be used for running electrical cables down to the electrical panel room. A detailed electrical design with single-line diagram and specifications will be prepared during full design phase after receiving the PO, for the client’s approval.

PH: +91 75033 25402

15


8. Clint Scope :-

1. Purchase the material i.e. solar modules, inverter etc. 2. Arrange the material on site before installation. 3. Storage for the material. 4. One light point and one water points for the installation team. 5. All kind of pass for the installation team and equipment’s. 6. Civil foundation of the structure. 7. Structure part assembling on roof. 8. Net metering connection in scope of the Al-Falah University. 9. All the Statutory clearances, if any, required for the Project taken by Clint.

************************************************************************************************************* ************************************************************************************************************* *

PH: +91 75033 25402

16


50kw solar rooftop Survey Report.pdf

Recommend Documents