GEPON device upgrade Test Item：Test GEPON upgrade function Test Purpose：Verify OLT upgrade function
Operation step: There are not effect with normal work when upgrade SMC, if upgrade interface slot, will effect single interface slot itself at short time, other interfaces slot will work in normal. Concrete upgrade flow is below: In this testing , interface slot 7 is primary slot, interface slot 8 is secondary slot).
Upgrade primary and secondary SMC software version. 1, check and record current version
Raisecom#show version slot 7-8 2, Save current configuration, and record information” show running-config all”.
Raisecom#write Saving current configuration.. Save current configuration successfully Raisecom# show running-config all
5, upgrade system software of interface slot 8.
Raisecom#download system-boot ftp 3.3.3.3 raisecom raisecom filename slot 8 Waiting.......Start 17 Getting source file from server ...Done Transmitting file to device...Size 3206K / 3206K Success! 6, reboot SMC slot 8
Raisecom#reboot slot 8 now 7, SMC slot 8 synchronization finished and check version, then to do forced switch to slot 7
Raisecom#show version slot 8 Raisecom(fttx)#nms forced-switch Raisecom(fttx)#nms forced-switch Are you sure to switch now?[yes]:yes Set successfully
9, upgrade system-boot of SMC slot 7 via slot 8. Raisecom#download system-boot ftp 3.3.3.3 raisecom raisecom filename slot 7 Waiting.......Start Getting source file from server ...Done Transmitting file to device...Size 3206K / 3206K Success! 10, Reboot SMC slot 7
Raisecom#reboot slot 7 now
11,SMC slot 7 synchronization finished and check version, then to do forced switch to slot 8 Raisecom#show version slot 7 Raisecom(fttx)#nms forced-switch Raisecom(fttx)#nms forced-switch Are you sure to switch now?[yes]:yes Set successfully Raisecom(fttx)# 12, checkout configuration in slot 7
Raisecom# show running-config all Notice: it is not recommended that upgrade SMC version 1.30 to V.120, if current network is running operation, because the configuration will be lost and lead to business can’t running in normal, the V1.30’ configuration can’t be compatible with V1.20.
Upgrade PON card to new version 1, check PON card version
Raisecom#show version slot x~y 2, batch upgrade PON card.
download system-boot ftp 3.3.3.3 raisecom raisecom filename slot all card-type 2pon Image file name:filename Card type：iscom5800-2pon List of Cards to be upgraded：sorted by SLOT ID: Card 1 Card2 Card3 Card4 Do you really want to upgrade software of above Cards[yes/no]:yes Waiting.......Start Getting source file from server ...Done Transmitting file to device...Size 3206K / 3206K
Success!
3, reboot all PON card which be successful upgrade. Raisecom#reboot slot x~y now
4, verify PON card version. Raisecom#show version slot x~y
Upgrade ONU version to V1.30 Raisecom#download system-boot tftp 192.168.15.82 ISCOM5104_1.30.2.20110112 onu 1/1/1 device-type 5104c Waiting.......Start Getting source file from server ...Done Transmitting file to device...Size 2405K / 2405K Waiting.............................. Success!
