Research about properties of Coated Engines.Full description
Coating specificationFull description
MIL- COATING PROCEDURE
Descripción completa
coatingFull description
Powder coating system auditFull description
manual
722.9 Spec
Full description
Description complète
Specification of RIPRAP
specminDescripción completa
specification and estimation syllabusFull description
Full description
About materials used in piping design.Full description
HVAC Specification
Full detail modenas kriss partFull description
Full description
ADDENDUM TO SPECIFICATION
No. A-PDF Split DEMO : Purchase NO. from www.A-PDF.com to removeDocument the watermark 6-71-0041 FOR 3 LAYER POLYETHYLENE COATING OF LINEPIPES
A099-004-16-71-AD-41 A099-004-16-71-AD-41 Rev.0 Page 1 of 2
OIL & NATURAL GAS CORPORATION, LTD.
HAZIRA-DAHEJ NAPHTHA PIPELINE PROJECT
ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER POLYETHYLENE COATING OF LINEPIPES
0
07.03.2011
ISSUED AS ADDENDUM
Rev. No
Date
Purpose
Format No. EIL 1641-1924 Rev. 1
A099-004-16-71-AD-41-0_Addendum to 3LPE Spec.doc
ST Prepared by
RK Checked by
RK Approved by
Copyright EIL – All rights reserved
805
ADDENDUM TO SPECIFICATION NO. 6-71-0041 FOR 3 LAYER POLYETHYLENE COATING OF LINEPIPES
Document No. A099-004-16-71-AD-41 A099-004-16-71-AD-41 Rev.0 Page 2 of 2
ADDENDUM/ AMENDMENT SPECIFICATION NO. : TITLE :
6-71-0041, Rev. 2 Standard Specification for 3 Layer Polyethylene Coating of Line pipes
Following amendments/additional amendments/additional requirements shall be applicable: 1.0
Refer Annexure-I of Page 27 of 27 The Annexure-I shall be Replaced by the following ANNEXURE-I LIST OF ACCEPTABLE COMBINATIONS OF COATING MATERIALS
The following combinations of coating materials are considered acceptable. In the event of award of contract, CONTRACTOR shall furnish the combination(s) proposed and reconfirmation of compatibility & properties of the proposed combination (s) from the raw materials Manufacturers & system properties. Epoxy Powder (Manufacturer)
Adhesive (Manufacturer)
PE Compound (Manufacturer)
CORRO-COAT EP-F 2001 (JOTUN)
FUSABOND 158D (DUPONT)
SCLAIR 35 BP HDPE (NOVACOR)
CORRO-COAT EP-F 2002HW (JOTUN) or SCOTCHKOTE 226N (3M)
LUCALEN G3710E (LYONDELLBASELL)
LUPOLEN 4552 D SW 00413 (LYONDELLBASELL)
PE 50-6109 (BASF) or CORRO-COAT EP-F 2001/2002HW (JOTUN) or SCOTCHKOTE 226N (3M)
ME 0420 (BOREALIS)
HE 3450 (BOREALIS/ BOROUGE)
CORRO-COAT EP-F 2001 (JOTUN)
LE – 149 V (S K CORPORATION) CORPORATION)
ET 509 B (S K CORPORATION) CORPORATION)
SCOTCHKOTE 226N (3M)
ME 0420 (BOREALIS)
PB 48A004 (GAIL)
Although the above combinations would be acceptable to COMPANY, the responsibility of suitability for application, performance, properties and compliance to the coating system requirements shall unconditionally lie with the CONTRACTOR. CONTRACTOR.
