Security Level:
Orange LTE Microwave Project RTN Hardware Key Issues & Basic Configuration Guide Huawei Jordan Office Network Product Line (Transport) 2015
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
SN
Version
Modify History
Complete Date
Prepared by
Reviewed
1
V1.0
Configuration & Commissioning
2-Apr-2015
Ahmed 00724888
Yousef00701261
2
V1.1
Hardware key issue
3-Apr
Chenxiang 00211421
Yousef00701261
Copyright © Huawei Technologies Co. Ltd. 2010. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 2
Instructions and Precautions for Handling Power Cable Terminals
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 3
Precautions for Handling the Toggle Lever Switch
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 4
Cable Connections
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 5
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 6
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 9
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 10
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 11
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
Checking the installation Use OJO Project QC & PAT documents to complete the check
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 13
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 14
NE Login 1- Configure IP address: 129.9.0.222/16 on your laptop “default IP address for RTN is 129.9.X.Y/16” 2-Connect Ethernet Cable between RTN IDU NMS port & your laptop 3-Start WebLCT 4- Login to WebLCT by user: Admin (default password: Admin@123). RTN980
Login from NMS port HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 15
NE Login
RTN950
Login from NMS port
Login from NMS port HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 16
Creating an NE
Configuring an NE
Configuring the RF link mode
Method 1: Create an NE by using the search method.
② ① ③
④
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 17
Configuring the IF/ODU Information of a Radio Link
Configuring an NE
Creating an NE
Configuring the RF link mode
Configuring the IF/ODU Information of a Radio Link
Method 2: Create an NE by using the manual method.
① ②
③
④ ⑤
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 18
Configuring an NE
Modifying the NE ID/Name
Configuring the RF link mode
Configuring the IF/ODU Information of a Radio Link
①
②
④
⑥
⑤
③ ⑦
HUAWEI TECHNOLOGIES CO., LTD.
Modify the NE ID. The ID of an NE in the network must be unique.
Huawei Confidential
Page 19
Add New Boards
Add new ODU
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Add new Page 20 ISV3
Creating a 1+1 Protection Group ①
Configuring an NE
Configuring the RF link mode
④
②
③
⑤
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 21
Configuring the IF/ODU Information of a Radio Link
Creating a 1+1 Protection Group
Configuring an NE
Configuring the IF/ODU Information of a Radio Link
Select the 1+1 SD/FD/HSB protection from the Working Mode drop-down list.
Use the default value.
HUAWEI TECHNOLOGIES CO., LTD.
Configuring the RF link mode
Huawei Confidential
Select a working IF board and a protection IF board. In the case of 1+1 FD/SD protection group, the working board and protection boards must be configured in two paired slots.
Page 22
Configuring an NE
Configuring the RF radio link
Configuring the IF/ODU Information of a Radio Link ① ④
② ③
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 23
Configuring the IF/ODU Information of a Radio Link
Configuring an NE
Configuring the IF/ODU Information of a Radio Link The AM function is disabled by default (keep disable).
Configuring the RF radio link
Configuring the IF/ODU Information of a Radio Link
Set the transmit frequency and the transmit power. (follow MW LLD)
These two parameters are available only when Enable AM is set to Enabled.
This parameter is available only when Enable AM is set to Disabled (Change based on LLD)
Set this parameter by strictly conforming to the design. The number of E1 services on both ends of a hop of a radio link hop. (Keep default) HUAWEI TECHNOLOGIES CO., LTD.
Used for recording performance events. The parameters are valid only when the ATPC function is enabled. Set the parameters according to the network planning documents.
If the OptiX RTN 900 is interconnected with the Packet radio equipment, this parameter is set to Enabled. Otherwise, this parameter is set to Disabled. (keep Disable) Huawei Confidential
Page 24
Change RTN IP, Gateway, Subnet mask
Procedure
Select the NE from the Object Tree in the NE Explorer. Choose Communication > Communication Parameters from the Function Tree.
Configure the communication parameters of the NE.
Click Apply.
(Follow NE ID/IP sheet from Huawei) By default NE IP follow NE ID & no need to change it, just double check.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 25
MW Link Configuration (Hop)
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 26
Creation ETH Service (E-Line)
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 27
Synchronizing NE Time
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 28
NE Performance Monitoring Time Procedure In the NE Explorer, select the NE from the Object Tree, and then choose Performance > NE Performance Monitoring Time from the Function Tree. Configure the performance monitoring parameters of the NEs. Select 15-Minute or 24-Hour. Select Enabled or Disabled in Set 15-Minute Monitoring or Set 24-Hour Monitoring. Set the start time and end time of the performance monitoring of NEs.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 29
