Build on formwork expertise
The formwork catalogue Formwork-technology pathbreakers
www.doka.com
Brochure, edition 04/2010 en-GB Article n° 931112002 © Copyright by Doka Industrie GmbH A-3300 Amstetten, Austria We reserve the right to make alterations in the interests of technical progress. Important notice Always observe all relevant safety regulations (e.g. as issued by construction-industry employee safety organisations) applying to the use of our products in the country in which you are operating. The illustrations in this brochure show the situation during formwork assembly and are therefore not always complete from the safety point of view. It could be dangerous to combine our formwork equipment with other manufacturers’. If you intend to combine different systems, please contact Doka for advice first.
2
Doka. The Formwork Experts.
6
Doka Services
16
Doka System Components
40
Doka Wall Systems
82
Doka Floor Systems
242
Doka Climbing Systems
306
Doka Load-bearing Systems
372
Doka Safety Systems
448
3
Contents
4
Doka. The Formwork Experts. Our values – the yardstick to measure us by Confidence built on trust Sustainability-oriented
6 8 9
Formwork-technology pathbreakers Partnership-oriented business relationships Worldwide
10 12 14
Doka Services Project development phase Tendering phase Operations scheduling phase
18 22 26
Execution of (shell) construction work Completion of (shell) construction
36
Formwork sheets Formwork sheet 3-SO Formwork sheet 3-S eco Formwork sheet 3-S plus Texture sheet 3-SO Dokaplex formwork sheet Xlife sheet
50 50 50 50 50 50 50
30
Doka System Components Timber formwork beams Beam H20 top Beam H20 eco Beam H16 Composite formwork beams Beam I tec 20
42 42 42 42 46 46
Dokadur panel Multi-ply formwork sheets Release agents Doka-Trenn Doka-OptiX Floor props Floor prop Eurex top
50 50 56 56 56 60 60
Floor prop Eurex Floor prop Eco Floor prop Eurex 60 Form-ties & suspension cones Multi-trip packaging Accessories for fair-faced concrete
60 60 60 64 74 78
Doka Wall Systems Framed formwork Framed formwork Framax Xlife Framed formwork Alu-Framax Xlife Dokaset Framed formwork Frami Xlife
Timber-beam formwork Large-area formwork Top 50 Wall formwork FF20 Large-area fmwk. Top 100 tec Wall formwork FF100 tec Circular formwork H20 Facade formwork Top 50
136 152 162 170 178 186
244 244 258 266
Timber-beam floor formwork Dokaflex 30 tec Doka Xtra Dokaflex 1-2-4
280 280 286 296
308 308
Crane-lifted climbing formwork Guided climbing formwork Xclimb 60 Climbing formwork MF240 Climbing formwork 150F Climbing formwork K Dam formwork
332
84 84 100 110 124
Column formwork Column formwork KS Xlife Column formwork RS Column formwork Top 50 Column formwork Framax Xlife Column formwork Frami Xlife
194 194 202 210 216 226
Single-sided formwork 230 Supporting construction frame 230
Doka Floor Systems Tableforms Dokamatic table Dokaflex table Shifting appliances for tables
Doka Climbing Systems Automatic climbing formwork Platform SCP Automatic climbing formwork SKE Automatic climbing formwork Xclimb 60 Cooling-tower fmwk. SK175
314 320 326
Shaft platform
366
332 336 346 352 358
Doka Load-bearing Systems Shoring towers Load-bearing tower Staxo 100 Load-bearing tower Staxo 40 Load-bearing tower d2
374 374 390 402
Tunnel formwork Heavy-duty supporting system SL-1
412 412
Bridge formwork Composite forming carriage Cantilever forming traveller Bridge edge beam formwork T Forming wagon T Forming wagon TU
416 416 422 428 434 442
Access systems Stair tower Ladder system XS
492 492 500
Doka Safety Systems Working & protection platforms Bracket platform M Folding platform K Platform system Xsafe plus
450 450 462 472
Alphabetical index of articles
506
Guardrail systems Handrail posts & clamps Sideguard system XP Protection screens Protection screen Xclimb 60
478 478 484 488 488
5
Doka. The Formwork Experts.
Doka. The Formwork Experts. Our values – the yardstick to measure us by
high-
pathbreaking
inspiring
6
nc rma e
reliab l
rfo
e
pe
Doka. The Formwork Experts.
Doka. The Formwork Experts.
Doka is the world’s most capable supplier of formwork systems, reliably offering its worldwide customers safe, groundbreaking solutions that give them maximum practical benefit. Reliable With our “good-as-our-word” integrity and our reliability as a supplier, we build partnership-oriented business relationships on every continent. High-performance For more than 50 years, we have been giving our customers tangible, measurable benefit, by consistently developing and improving our products and services. Here, we focus rigorously on boosting the productivity of the on-site workflow and sharpening our customers’ competitive edge. Inspiring Our motivated employees excel for their efficiency, hard work and commitment, and more than meet our customers’ expectations.
Formwork-technology pathbreakers.
7
Doka. The Formwork Experts.
Confidence built on trust
“With reliability and capability, we help you to build faster, better and more cost-effectively.” Doka Executive Management is geared to delivering the highest possible level of meaningful benefit to the customer. By consistently focusing all our activities on your needs and requirements, we can provide you with an attractive range of offerings that will secure your competitive advantage. Rainer Spitzer Johann Strunz Josef Kurzmann Ludwig Pekarek Jürgen Obiegli
8
Doka. The Formwork Experts.
Doka. The Formwork Experts.
Sustainability-oriented
Making responsible use of resources, and complying rigorously with all environmental regulations, are central obligations that we take very seriously indeed. Continually optimising our energy and resource consumption takes top priority here. Our certification to PEFC standards (Programme for the Endorsement of Forest Certification schemes) underlines our unreserved commitment to sustainable forestry that takes equal account of environmental, economic and social criteria.
9
Doka. The Formwork Experts.
Formwork-technology pathbreakers
With over 145 patents and trend-setting product innovations to our name, we are the formwork sector’s undisputed innovation leader. Our top priority when developing new, state-of-the-art products is to make these safe and easy to handle, extremely cost-efficient and very fast.
10
Doka. The Formwork Experts.
Doka. The Formwork Experts.
Manufacturing high-grade systems and formwork components is one of our core competences – and has been for over 50 years. Our state-of-the-art manufacturing facilities, choice quality materials, highly qualified production personnel and rigorous quality control all help to explain why our formwork products are exceptionally long-lived. Our high quality consciousness is underlined by our insistence on working with certified suppliers and on having an externally audited quality management system in all areas of our production operations.
11
Doka. The Formwork Experts.
Partnership-oriented business relationships Professional advice and consulting The way is often paved for the success of a project early on, in the project development phase. Selecting the right formwork system is a key factor in obtaining smooth, successful construction progress. We can be of vital assistance with decision-making at this early stage.
Thorough, in-depth planning With our reliable planning services, we develop tailor-made formwork solutions – for your success! Comprehensive analysis of the structure, of the available resources, of the required quality and of the deadlines to be met – all this provides the basis for our planning, generating added value for your benefit.
12
Doka. The Formwork Experts.
On-site support
Doka. The Formwork Experts.
Our site foremen make sure that the formwork planning and operations scheduling are properly implemented on the site. This takes in everything from supervising siteassembly to helping the site crew operate the equipment correctly and giving them the appropriate skills training.
Transparent rentalequipment returns We plan smooth, hassle-free rental returns, thus creating a high degree of cost transparency. Together with the customer, we inspect the rented equipment, agree on what condition each item is in and on what further steps will be needed, and effect return delivery in accordance with Doka rental-park standards.
13
Doka. The Formwork Experts.
Worldwide
Doka GmbH Josef Umdasch Platz 1 3300 Amstetten Austria Tel. +43 (0) 7472 605-0 Fax +43 (0) 7472 64430 E-Mail:
[email protected] www.doka.com
Algeria SARL Doka Algérie +213 770 112 540
France Doka France SAS +33 (0)1 34 84 27 27
Morocco Doka GmbHMoroccan Representation +212 5 377 16093
Azerbajan Doka Türkiye Baku Representative Office +994 (0)12 493 33 63
Germany Deutsche Doka Schalungstechnik GmbH +49 (0)8141 394-0
Mexico Doka México +52 55 166 77553
Bahrain Doka Bahrain / Div.of M. Othman Trading Est. +973 17 402 810
Greece Doka Hellas Kaloupotechniki Technologiki A.E. +30 210 6669-211
Belarus Doka Belform IOOO +375 17 213-0014
Hungary Magyar Doka Zsalutechnika Kft. +36 1 436 7373
Belgium Doka N.V. +32 (0)2 582 0270
India Doka India Pvt. Ltd. +91 22 402 64435
Brazil Doka Brasil Fôrmas para Concreto Ltda. +55 (0)11 2088 5777
Iran Iran Kafilo Co. +98 21 2222 3544
Netherlands Doka Nederland BV +31 (0)412 65 30 30 New Zealand ACROW Ltd. +64 (0)9 579 2276 Norway Doka Norge AS +47 72 89 38 10 Oman Doka Muscat LLC +968 244 844 45 Panama Doka Panama S.A. +507 232 9150
Bulgaria Doka Bulgaria EOOD +359 (0)2 975 0785
Ireland Doka Ireland Formwork Technologies Ltd. +353 (0)41 686 1620
Canada Doka Canada Ltd./Ltée +1(403) 243 66 29
Italy Doka Italia S.p.A. +39 02 98 27 61
Portugal Doka Portugal Cofragens Lda. +351 21 911 26 60
Chile Doka Chile Encofrados Limitada +56 2 41 31 600
Japan Doka Japan K.K. +81 (0) 4 7178 8808
Qatar Doka Qatar WLL +974 4500628
China Doka Formwork Co., Ltd. +86 21 6090 0899
Jordan Doka Jordan LLC +962 6554 5586
Croatia Doka Zagreb d.o.o. +385 (0)1 2480 020
Kazakhstan LLP Doka Kazakhstan +7 7172 27 1290
Romania Doka România Tehnica Cofrajelor S.R.L. +40 (0)21 2064950
Czech Republic Ceská Doka bednící technika spol. s.r.o. +420 284 001 311
Korea Doka Korea Ltd. +82 (31) 478 3700
Denmark Doka Danmark ApS +45 46 56 32 00 Egypt Doka GmbH Representative Office Egypt +20 (0)2 22 677 216 Estonia Doka Eesti OÜ +372 603 0650 Finland Doka Finland Oy +358 (0)9 224 2640
14
Kuwait Doka Kuwait / Div. of Riham Gen. Trad. & Cont. Co. +965 24822 462
Poland Doka Polska Sp. z o.o. +48 (0)22 771 08 00
Russia OOO Doka Rus +7 495 650 9922 Saudi Arabia Mahmoud Othman & Sons LLC +966 (0)2 669 1008 Senegal 2S BTP +221 33 825 40 06
Latvia SIA ,,Doka Latvia“ +371 6702 9700
Serbia Doka Serb d.o.o. +381 11 22 66 111
Lebanon Doka Lebanon Branch +961 (0)1 612 569
Singapore Doka Formwork Pte. Ltd. +65 6897 7737
Lithuania UAB Doka Lietuva +370 5 2780678
Slovakia Doka Slovakia Debniaca technika s.r.o. +421 (0)2 43 42 14 26
Slovenia Doka Slovenija opazna tehnologija d.o.o. +386 (0)4 5834 400 South Africa Doka South Africa (Pty) Ltd. +27 (0)11 310 9709 Spain Doka España Encofrados, S.A. +34 91 685 75 00 Sweden Doka Sverige AB +46 (0)10 45 16 300 Switzerland Holzco-Doka Schalungstechnik AG +41 (0)43 411 20 40 Taiwan DEC Engineering Corp. +886 2 2753 42 61 Thailand Subway Engineering & Supply Co., Ltd. +66 2 247 3910 4 Tunisia Doka Tunisia Ltd. +216 (0)71 977 350 Turkey Doka Kalip-Iskele Sanayi ve Ticaret A.S. +90 (0)262 751 50 66 Ukraine Doka Ukraine T.O.V. +380 (0)44 531 38 93 United Arab Emirates Doka Gulf FZE +971 (0)4 881 8096 United Kingdom Doka UK Formwork Technologies Ltd. +44 (0)1622 749050 USA Doka USA, Ltd. +1 (201) 329 7839 Vietnam Specialist Construction System (HK) Ltd. +84 90 403 9388
Doka. The Formwork Experts.
That means speedy and prompt availability of the quantities of formwork you need – whether for purchase or rental – coupled with firstrate consulting and problemsolving capability. Thanks to the international networking of our locations, you can call upon our comprehensive formwork knowhow any time, anywhere.
15
Doka. The Formwork Experts.
There are more than 140 branches and delivery depots around the world where you can obtain the full spectrum of Doka products and services.
Doka Services
Doka Services Support in every phase of the project Doka Engineering
Project support Rental Service
Utilisation plans
16
Doka Services
Site foremen
Doka Services
Formwork co-ordination
Return of rented formwork Reconditioning Service
Every project is unique. Nevertheless, there is one thing that all construction projects have in common – and that is a basic structure with five phases. Doka’s consulting, planning and ancillary services help you achieve effective implementation of your formwork assignment using our formwork products – in every one of these phases.
Page Project development phase
18
Tendering phase
22
Operations scheduling phase
26
Execution of (shell)construction work
30
Completion of (shell)construction
36
17
Project development phase | Doka Services
Project development phase Professional consulting – right from the word “go”
The sooner we start talking about the challenges, the sooner we can come up with solutions – solutions which lay the foundation for the success of the whole project. Even in this very early phase of your project, the Doka experts can provide important information to make sure that you benefit from good advice right from the outset.
18
Doka Services | Project development phase
Full control of the costs The client has an idea that it wants to turn into reality. The planning work begins, the bid invitation is drawn up and preparatory steps start to be taken. Both the technical and financial risks and possibilities have to be assessed, as the success of a project depends crucially on keeping the cost risk, above all, tightly under control.
Taking well-founded decisions thanks to professional advice and consulting Find precisely the right formwork solutions, with the aid of • help with the bid invitation • in-depth analysis of the initial situation
Project development phase
• objective evaluation of the planning, execution, and time-risks
A selection of Doka’s services is presented in detail on the following pages. Your Doka adviser will be pleased to give you comprehensive information on all the services that Doka offers.
19
Project development phase | Doka Services
Formwork conception in the project development phase Information builds confidence Doka’s broad range of information offerings will give you an overview of all the many possibilities of the product and service portfolio, and of reference projects covering all fields of formwork engineering. The conveniently structured User Information booklets contain practical information on how to erect and deploy the Doka formwork systems correctly.
Project support With its tailor-made advisory services, Doka can help you to optimise your workflows in every phase of your project – boosting efficiency at your site. Doka project support comprises: • detailed identification of customer requirements • advice and consulting on all business, technical and logistical issues regarding the formwork operations
Reference builds Come and see Doka formwork systems in action – and what a difference they make in practice. Profit from the opportunity of sharing views and experience onsite with Doka formwork specialists, the lead contractor and a representative of the project owners.
20
Doka Services | Project development phase
Doka Training The clearly structured curricula of Doka training courses are precisely tailored to the requirements of everyday jobsite practice, and have a direct and immediate usefulness that can be put into practice on your site right away – for fast, safe and efficient forming operations. Benefit from having more highly skilled employees!
Project development phase
Ask for the Doka Training Brochure, which will give you an overview of all Doka training offerings.
Doka Seminars
Doka Special
Doka’s comprehensive range of continuing training offerings covers all areas of formwork technology, from wall and floor-slab systems to formwork systems for tunnel and bridge-building and to automatic climbing equipment. Other key topics include workplace safety, formwork planning and fair-faced concrete.
With our custom-tailored “Doka Special” events, we also offer you the opportunity of focusing on a specific topic that is important to you in everyday on-site practice. Site-proven formwork technicians will prepare the training curricula so that these are specially customised for your individual needs.
21
Tendering phase | Doka Services
Tendering phase The certainty that comes from thorough, careful planning
Before you can successfully finalise a project, you have to have won the order for it. Selecting the right formwork system can make a decisive contribution towards achieving a costeffective construction workflow. With Doka, realistically and precisely calculated prices, and careful attention to risks, are something you can take for granted. After all, it’s your success that’s at stake.
22
Doka Services | Tendering phase
Making the right selection The project has been put out to tender and the client is expecting to receive bids for the works specified in the bid invitation. The contractor’s job in this phase of the project is to draw up a bid that is technically feasible and that can be carried out by the desired deadline at an economical price. This involves considerable effort for the contractor, in terms of work, ideas and costs.
Optimising the preliminary work with Doka as an experienced partner Substantial reduction of • business risks in carrying out the works
Tendering phase
• technical risks in carrying out the forming operations
A selection of Doka’s services is presented in detail on the following pages. Your Doka adviser will be pleased to give you comprehensive information on all the services that Doka offers.
23
Tendering phase | Doka Services
Support in the tendering phase Selecting the formwork system The choice of formwork solution has a crucial influence on the profitability of your construction project. On the basis of the project requirements, a detailed formwork concept is drawn up, having regard to the site logistics and the operations scheduling. Compliance with the required deadlines, quality and costs takes top priority here.
Quoting guideline prices To draw up your costings, you need realistically calculated guideline prices. Doka’s guideline prices are informed by the experience of very many previous projects. This gives you certainty and peace of mind when working out the costings for your project and the resulting bid.
Doka Engineering Benefit from the high capability of the Doka Formwork Experts right from the very beginning of your project. Their technical preparations communicate all of the knowledge needed for a successful project, and include technical support such as quantity surveys or calculations to determine the commissioning quantities.
24
Doka Services | Tendering phase
Presentation of the formwork concept
Tendering phase
Doka specialists provide detailed explanations of our bid, with an in-depth presentation of the services that it includes. This precise and accurate information saves you valuable time.
Types of Doka business
Rental Service
Flexibility is what counts. Doka offers many different types of business to cater for widely differing requirements. Ask your Doka branch to work out which would be best for you.
Swift availability of formwork equipment is a crucial factor. Doka’s international branch network, with high-capacity rental parks, ensures security of supply and quick provisioning times. The Doka quality standards stand for certainty and reliability, and help renters to achieve cost-effective construction workflows by providing them with quality-inspected formwork equipment.
25
Operations scheduling phase | Doka Services
Operations scheduling phase Profit from thorough, accurate planning
The order has been placed. Now it’s all about meeting the client’s expectations – so if work on the site is to move ahead efficiently and safely, thorough planning will be required. For all tasks relating to formwork, Doka has the right know-how and is the expert partner that you can depend on.
26
Doka Services | Operations scheduling phase
Planning how to carry out the works In this phase, Doka Services can help to lessen the amount of planning work that you need to do on your own, giving you the peace of mind that comes from knowing that a realistic and feasible plan is being drawn up by experts. By ruling out incalculable risks, this leads to fast, safe construction progress.
Controlled, regular forming operations, for greater efficiency resulting from realistically calculated formwork concepts Plan cost-effectively right from the outset, thanks to • detailed offers • determination of the commissioning quantities
Operations scheduling phase
• co-ordination of lead-times and handover deadlines
A selection of Doka’s services is presented in detail on the following pages. Your Doka adviser will be pleased to give you comprehensive information on all the services that Doka offers.
27
Operations scheduling phase | Doka Services
Support in the operations scheduling phase Tender drawings The Doka formwork concept, complete with details of the underlying assumptions and stipulated boundary conditions, is presented in tender drawings – as the basis for your planning!
Quoting detailed prices Price calculation based on the tender planning is a dependable basis for your jobsite costings.
Tipos With its planning software Tipos, Doka gives you a helpful and easy-to-use tool for optimised materials planning at your site. Tipos is extremely user-friendly. Simply enter all measurement data (layout, radii, diameters, circular arcs etc.) using the “Schal-Igel®” on-screen assistant. You can choose between 8 different language versions of the program. You can interactively intervene in the planning program whenever you wish, in order to take account of changed conditions on the site during the planning process. Layouts, sections, close-ups, photos and texts from other programs can all also be incorporated without difficulty.
Timetabling the formwork operations The relevant deadlines and timeframes for the forming operations are worked out on the basis of the specified construction schedules. Greater efficiency, from • time-savings due to the co-ordinated, transparent workflows • reduced commissioning costs • simplification of operations scheduling • optimum utilisation of available site resources
28
Doka Services | Operations scheduling phase
Competence Centres The expert knowledge concentrated in the Doka Competence Centres ensures cost-effective comprehensive formwork solutions on technically demanding construction projects. Available worldwide in the following areas • automatic climbing formwork • tunnel formwork • cantilever forming travellers
Operations scheduling phase
• composite bridges
Co-ordination and handover deadlines
Site logistics
Punctuality is vital. All formwork-related deadlines are coordinated in detail with Site Management, and formwork equipment and services are provided on time – for fast, troublefree construction progress.
Well thought-out site logistics is the essential precondition for smooth forming operations, and ensures • enhanced workplace safety • less wear-and-tear on equipment • less on-site handling of equipment • reduced searching and handling times
29
Execution of (shell)construction work | Doka Services
Execution of (shell)construction work Greater efficiency, from deploying equipment correctly
After the works have been planned and prepared, the next stage is to start implementing them. For this, it is necessary to guide, co-ordinate and monitor how the works are carried out. The necessary resources must be put in place and the processes, and compliance with the plans, must be monitored – and adapted to changing circumstances where necessary.
30
Doka Services | Execution of (shell)construction work
Joining forces to implement the project “Success has many fathers”, as the old saying goes. Successfully seeing a construction project through to completion calls for many different components. Doka offers services that help you to optimise the construction workflow and stay within the timetable, by making more sparing and efficient use of your own resources.
Optimum resource utilisation with assistance from the Doka Formwork Experts Workflow optimisation, thanks to • thorough utilisation planning • internationally experienced project technicians • appropriate transport logistics Execution of (shell)construction work
• on-site support
A selection of Doka’s services is presented in detail on the following pages. Your Doka adviser will be pleased to give you comprehensive information on all the services that Doka offers.
31
Execution of (shell)construction work | Doka Services
Support with executing the (shell)construction work Formwork utilisation plans Thorough, accurate planning is the basis for fast, safe forming operations. Doka planning is carried out on an engineering basis in accordance with the applicable Standards and rules. To simplify implementation, Doka can draw up bills of materials which will give you a good overview of all the products and services. If you wish, Doka experts will be pleased to draw up cycle plans for you, so that you can make optimised use of the required quantity of formwork.
Verifiable statical calculations For special projects, we can draw up a statical proof in documentary form for review by a civil engineer or test engineer.
Structure modelling To give you a better visualisation of complex geometries, Doka technicians can model the structure for you.
3D planning Modern structure geometries call for modern planning methods and expert knowledge. Doka technicians will develop 3D-models for you as the basis for your formwork.
32
Doka Services | Execution of (shell)construction work
Doka system formwork covers wide areas of formwork applications. Special situations or structural requirements will often necessitate special solutions, however – and this is where the Doka “Ready-toUse” Service comes in, “tailormaking” custom formwork units. Its pool of concentrated know-how, and the many synergies it makes possible, translate into real practical benefit for you, and into optimum results. By combining standard Doka systems with individually adapted solutions, it can deliver custom formwork that is highly cost-effective. Each such custom formwork is very precisely crafted to ensure smooth, troublefree assembly on the site.
Transport Shipping pre-assembled (custom) formwork elements requires a great deal of knowledge regarding the correct way to load, pack, store and secure them. Doka has the necessary routine and practice to optimise these oversize shipments in just the same way as it does with “normal” shipments. The Doka logistics experts have just the right solution for you!
33
Execution of (shell)construction work
“Ready-to-Use” service
Execution of (shell)construction work | Doka Services
Support with executing the (shell)construction work Project processing on the site “Help quickly and you’ll be twice as helpful”, goes an old saying. Where needed, experienced Doka specialists can perform the agreed business or technical service directly on the site. Being in direct touch with the decision-makers in this way means that there are fewer interfaces, which in turn helps the project to progress smoothly.
Customer Service Our Customer Service will be pleased to help you with preventive and corrective maintenance of electrical or hydraulic formwork equipment. If necessary, Doka rental formwork and client-owned Doka equipment can be inspected either on the site or at the depot.
Formwork pre-assembly on-site Specially trained Doka staff can erect special equipment and custom formworks directly on the site, in accordance with an exactly defined scope of work and with the approved Doka planning. This ensures that the formwork is correctly set up and that you can take delivery of the pre-erected formwork equipment at an agreed time.
34
Doka Services | Execution of (shell)construction work
Site foremen
Execution of (shell)construction work
The Doka site foreman is a specially trained and experienced practitioner who explains to your crew how to use the formwork effectively and safely. This starts with familiarising them with how to handle the formwork and continues with operator training and even with formal instruction leading to written certification.
Formwork inspection after erection
Formwork co-ordination
After it has been erected, the formwork planned by Doka is inspected on-site to check whether it has been set up as specified in the plans, and the result of the inspection is recorded in writing.
Doka will facilitate your project and assist your formwork crew in an advisory capacity, even for prolonged periods.
35
Completion of (shell)construction | Doka Services
Completion of (shell)construction Handing over a clean and tidy result
Now that work on the structure shell has been completed, it is important to get the site in shape ready for the following operations. Formwork equipment that is no longer needed must be efficiently removed from the site to create space for the subsequent works, to keep down costs and to minimise risks such as theft or damage. And of course safety is considerably improved on an uncluttered, tidy site.
36
Doka Services | Completion of (shell)construction
Conserving in-house resources Preparing and monitoring safe return deliveries of rented formwork is a frequently underestimated area of work with the potential to offer considerable savings. Doka Services ensure that your resources are employed in the most efficient way in this phase of the project as well, and give you focused, systematic support.
Seeing things through to a positive conclusion with professional support Doka Services are a byword for transparency and efficiency here, offering • jointly handled return of rented formwork • professional dismantling Completion of (shell)construction
• efficient cleaning and reconditioning using special equipment
A selection of Doka’s services is presented in detail on the following pages. Your Doka adviser will be pleased to give you comprehensive information on all the services that Doka offers.
37
Completion of (shell)construction | Doka Services
Support with completion of (shell)construction Final meeting Doka joins with the client to analyse the finished project with regard to its technical planning and execution, the project realisation and the “bottom-line” of the project in terms of pricing, equipment commissioning quantities, logistics and the quality of the processes. This helps both parties to locate any optimisation potential for future projects that they work on together.
Return of rented formwork Transparency is paramount. After a joint viewing of the rented equipment on the site or at the branch, Doka and the client together draw up a return-delivery memo that is binding on both parties and that gives exact information on the quantity and the state of the equipment.
Dismantling by “Ready-to-Use” service Formwork units are dismantled in the Doka Ready-to-Use Service centres, client-owned equipment is sorted and any non-reusable formwork equipment can be disposed of properly on request. In this way, you can concentrate fully on your own core competences.
38
Doka Services | Completion of (shell)construction
Reconditioning Service
Completion of (shell)construction
Doka rental formwork and client-owned Doka equipment is cleaned and overhauled here, to Doka quality standards, by the Doka Reconditioning Service. This lengthens its service life and ensures safety and reliability for the next formwork assignment.
Cleaning
Cleaning & Reconditioning Plus
Accumulated dirt is removed from the formwork using special equipment and industrialised procedures so as to fulfil the Doka quality standards. Depending on the degree of soiling and the product, the cleaning operation will comprise both wet cleaning, mechanical cleaning and special cleaning.
In the “Cleaning & Reconditioning Plus” service, dirt accumulations are removed from the Doka formwork, and any repairs needed on the Doka formwork components are carried out. Your Doka branch will be pleased to inform and advise you!
39
Doka System Components
Doka system components Optimum “construction kit” solutions
40
Doka System Components
One of the fundamental things our formwork systems are based on is site-proven components. Doka system components are designed for long lifespan, maximum efficiency and the utmost workplace safety. Sharpen your competitive edge by using high-performance Doka products.
Page Timber formwork beams
42
Beam H20 top Beam H20 eco Beam H16
Composite formwork beams
46
Beam I tec 20
Formwork sheets
50 Doka System Components
Formwork sheet 3-SO Formwork sheet 3-S eco Formwork sheet 3-S plus Texture sheet 3-SO Dokaplex formwork sheet Xlife sheet Dokadur panel Multi-ply formwork sheets
Release agents
56
Doka-Trenn Doka-OptiX
Floor props
60
Floor prop Eurex top Floor prop Eurex Floor prop Eco Floor prop Eurex 60
Form-ties and suspension cones
64
Multi-trip packaging
74
Accessories for fair-faced concrete
78
41
Timber formwork beams Timber formwork beams | Doka System Components
Timber formwork beams High-performing beams for all Doka formwork systems
Doka timber formwork beams have what is called a “solid-web design”. Hundreds of thousands of them are in use day-in, day-out, on construction sites all over the world.
42
Doka System Components | Timber formwork beams
The competitive-advantage component With their “use-anywhere” capability, Doka timber formwork beams are compatible with all Doka formwork systems. Another factor making them indispensable on every jobsite is the painstaking care with which they are manufactured. The H20 top, H20 eco and H16 beams are familiar names all over the world, and are the right choice for any application.
Beam H20 top Up to 3 times the lifespan Put the advantages of this rugged beam to work for you: • long life unmatched by any other beam, thanks to its built-in shock absorber • fast, safe formwork set-up by referring to markings on the flanges • beams can be labelled – deters theft and uses the beams as an advertising vehicle
Beam H20 eco Tested Doka quality for your site Timber formwork beams
Among the convincing features of the H20 eco beam are its • beam rivets and bevelled flange-ends • ease of handling thanks to its very low weight • high-quality flanges, achieved by 100 % machine stress-grading
Beam H16 Easy forming with only minimal weight Among the convincing features of the H16 beam are its • low weight of only 3.5 kg per m • reinforced beam-ends • high load capacity – despite having an overall height of only 16 cm • space-saving transport and handling
PEFC/06-38-211
www.pefc.org – These products use materials from sustainably managed forests and controlled sources.
43
Timber formwork beams | Doka System Components
Article list Doka beam H20 top N 1.80m Doka beam H20 top N 2.45m Doka beam H20 top N 2.65m Doka beam H20 top N 2.90m Doka beam H20 top N 3.30m Doka beam H20 top N 3.60m Doka beam H20 top N 3.90m Doka beam H20 top N 4.50m Doka beam H20 top N 4.90m Doka beam H20 top N 5.90m Doka beam H20 top N .....m Doka beam H20 top N .....m BS Doka-Träger H20 top N
[kg]
Article n°
9.5 12.8 13.8 15.0 17.0 18.5 20.0 23.0 25.0 30.0 5.2 5.2
189011000 189012000 189013000 189014000 189015000 189016000 189017000 189018000 189019000 189020000 189010000 189021000
Varnished yellow
Doka beam H20 eco N 1.25m Doka beam H20 eco N 1.80m Doka beam H20 eco N 2.45m Doka beam H20 eco N 2.65m Doka beam H20 eco N 2.90m Doka beam H20 eco N 3.30m Doka beam H20 eco N 3.60m Doka beam H20 eco N 3.90m Doka beam H20 eco N 4.50m Doka beam H20 eco N 4.90m Doka beam H20 eco N 5.90m Doka beam H20 eco N 12.00m Doka beam H20 eco N .....m Doka beam H20 eco N .....m BS Doka-Träger H20 eco N
[kg]
Article n°
6.3 9.0 12.3 13.3 14.5 16.5 18.0 19.5 22.5 24.5 29.5 60.3 5.0 5.0
189282000 189283000 189271000 189272000 189273000 189284000 189285000 189276000 189286000 189277000 189287000 189288000 189299000 189289000
6.5 9.4 12.7 13.8 15.1 17.2 18.7 20.3 23.4 25.5 30.7 46.8 5.2 5.2
189939000 189940000 189936000 189937000 189930000 189941000 189942000 189931000 189943000 189932000 189955000 189956000 189999000 189957000
Varnished yellow
Doka beam H20 top P 1.80m Doka beam H20 top P 2.45m Doka beam H20 top P 2.65m Doka beam H20 top P 2.90m Doka beam H20 top P 3.30m Doka beam H20 top P 3.60m Doka beam H20 top P 3.90m Doka beam H20 top P 4.50m Doka beam H20 top P 4.90m Doka beam H20 top P 5.90m Doka beam H20 top P .....m Doka beam H20 top P .....m BS Doka-Träger H20 top P
9.9 13.2 14.3 15.6 17.7 19.2 20.8 23.9 26.0 31.2 5.4 5.4
189701000 189702000 189703000 189704000 189705000 189706000 189707000 189708000 189709000 189710000 189700000 189711000
Varnished yellow
Doka beam H20 eco P 1.25m Doka beam H20 eco P 1.80m Doka beam H20 eco P 2.45m Doka beam H20 eco P 2.65m Doka beam H20 eco P 2.90m Doka beam H20 eco P 3.30m Doka beam H20 eco P 3.60m Doka beam H20 eco P 3.90m Doka beam H20 eco P 4.50m Doka beam H20 eco P 4.90m Doka beam H20 eco P 5.90m Doka beam H20 eco P 9.00m Doka beam H20 eco P .....m Doka beam H20 eco P .....m BS Doka-Träger H20 eco P
Varnished yellow
Timber varnish yellow 5l Holzlasur gelb 5l
5.0 176005000
Timber varnish yellow 5l Holzlasur gelb 5l
44
5.0 176005000
Doka System Components | Timber formwork beams
Doka formwork beam H16 N 2.45m Doka formwork beam H16 N 2.90m Doka formwork beam H16 N 3.60m Doka formwork beam H16 N 3.90m Doka formwork beam H16 N 4.90m Doka formwork beam H16 N 5.90m Doka-Schalungsträger H16 N
[kg]
Article n°
8.6 10.2 12.6 13.7 17.2 20.7
189802000 189803000 189809000 189805000 189813000 189814000
[kg]
Article n°
Varnished yellow
Doka formwork beam H16 P 2.45m Doka formwork beam H16 P .....m Doka-Schalungsträger H16 P
10.4 189961000 4.3 189960000
Varnished yellow
Holzlasur gelb 5l
5.0 176005000
Timber formwork beams
Timber varnish yellow 5l
45
Composite formwork beams Composite formwork beams | Doka System Components
Composite formwork beams The new benchmark for load-bearing capacity
The combination of timber and plastic has resulted in the toughest, strongest composite formwork beam on the market – the I tec 20.
46
Doka System Components | Composite formwork beams
Ultra-high load capacity has a name – I tec 20 The unique design of the I tec 20 beam sets a new benchmark for load capacity, permitting “materials-optimised” jobsite deployment. What makes this formwork beam so robust is the combination of the novel plastic sheet on the flange, and the field-proven end-reinforcements from the “top” beams.
Extremely robust thanks to its innovative design Benefit from the advantages of the innovative I tec 20 beam • increases load-bearing capacity by approx. 80 % • extra-long service life from tried-and-tested “top” beam-end reinforcements and plastic sheet • same height and width as H20 beam • reduces volumes of equipment needed for floor and wall formwork
Composite formwork beams
• compatible with other proven Doka systems
The structural-design figures speak for themselves The main performance criteria of the I tec 20 at a glance • moment (M) = 9 kNm • shear force (Q) = 20 kN • rigidity (E x I) = 700 kNm² • weight (G) = 5.8 kg/m
Dokaflex 30 tec
Wall formwork FF100 tec
Large-area formwork Top 100 tec
PEFC/06-38-211
www.pefc.org – This product uses materials from sustainably managed forests and controlled sources.
47
Composite formwork beams | Doka System Components
Article list [kg]
Article n°
10.4 14.2 15.4 16.8 19.1 20.9 22.6 26.1 28.4 34.2 5.8
188001000 188002000 188003000 188004000 188005000 188006000 188007000 188008000 188009000 188010000 188011000
Doka System Beam I tec 20 Components
Doka beam I tec 20 1.80m Doka beam I tec 20 2.45m Doka beam I tec 20 2.65m Doka beam I tec 20 2.90m Doka beam I tec 20 3.30m Doka beam I tec 20 3.60m Doka beam I tec 20 3.90m Doka beam I tec 20 4.50m Doka beam I tec 20 4.90m Doka beam I tec 20 5.90m Doka beam I tec 20 .....m Doka-Träger I tec 20
Varnished yellow Grey
Doka beam I tec 20 12.0m
69.6 188012000
Doka-Träger I tec 20 12,0m
Varnished yellow Grey
Timber varnish yellow 5l Holzlasur gelb 5l
48
5.0 176005000
[kg]
Article n°
Composite formwork beams
Doka System Components | Composite formwork beams
49
Formwork sheets Formwork sheets | Doka System Components
Formwork sheets The right form-facing for the best concrete finishes
Manufactured in advanced production facilities, formwork sheets from Doka offer superb properties for a very wide spectrum of applications. Take your choice from this extensive range, that scores convincingly the world over.
50
Doka System Components | Formwork sheets
The right formwork sheet for every requirement Formwork sheet 3-SO Quality you can rely on, time after time First-rate concrete results and very low costs per use thanks to its superb quality, high dimensional stability and squareness, choice quality timbers and uniform coating.
Formwork sheet 3-S eco The low-cost three-ply sheet with a long lifespan Cuts form-ply costs as sheets need to be changed less often, and give good concrete results thanks to their dimensional stability even after absorbing moisture.
Formwork sheet 3-S plus The 3-ply sheet for Doka tableforms Shape-stability from the special strip-core layer, minimised cracking thanks to the tough surface layers, and PU sealing-layer for higher numbers of repeat uses.
Texture sheet 3-SO The sheet for board-type surface structures
Formwork sheets
Visibly attractive concrete faces with a board-type surface structure, thanks to extra PU varnish sealant on one side and brushed surface with recessed grooves that deliver a ribbed finish.
Dokaplex formwork sheet Ultimate format and angle accuracy Fast on-site assembly thanks to tight tolerances and superior format accuracy, for smooth, top-quality concrete surfaces.
Xlife sheet Very high number of re-use cycles thanks to special sheet structure A new benchmark for concrete quality and cost-efficiency, the Xlife sheet cuts costs by minimising the labour inputs needed for carrying out finishing-work on the concrete, for changing the sheets and for cleaning. Thanks to its special polypropylene surface, Xlife also constantly delivers a uniform concrete appearance.
Dokadur panel Cuts costs with option to either purchase or rent Maximises the numbers of re-use cycles by means of its all-round edge protection and special surface sealing.
Multi-ply formwork sheets For every site and every usage location Multi-ply formwork sheets are available as coated birch plywood; as coated spruce for enhanced requirements, superb concrete faces and infill zones; or as coated poplar plywood for normal requirements, clean concrete surfaces and infill zones.
51
Formwork sheets | Doka System Components
Article list [kg]
Article n°
Doka formwork sheet 3-SO 21mm 100/50cm Doka formwork sheet 3-SO 21mm 150/50cm Doka formwork sheet 3-SO 21mm 200/50cm Doka formwork sheet 3-SO 21mm 250/50cm Doka formwork sheet 3-SO 21mm 300/50cm Doka formwork sheet 3-SO 21mm 350/50cm Doka formwork sheet 3-SO 21mm 400/50cm Doka formwork sheet 3-SO 21mm 450/50cm Doka formwork sheet 3-SO 21mm 500/50cm Doka formwork sheet 3-SO 21mm 550/50cm Doka formwork sheet 3-SO 21mm 600/50cm Doka formwork sheet 3-SO 21mm 100/100cm Doka formwork sheet 3-SO 21mm 150/100cm Doka formwork sheet 3-SO 21mm 200/100cm Doka formwork sheet 3-SO 21mm 250/100cm Doka formwork sheet 3-SO 21mm 300/100cm Doka formwork sheet 3-SO 21mm 350/100cm Doka formwork sheet 3-SO 21mm 400/100cm Doka formwork sheet 3-SO 21mm 450/100cm Doka formwork sheet 3-SO 21mm 500/100cm Doka formwork sheet 3-SO 21mm 550/100cm Doka formwork sheet 3-SO 21mm 600/100cm Doka formwork sheet 3-SO 21mm 150/50cm BS Doka formwork sheet 3-SO 21mm 200/50cm BS Doka formwork sheet 3-SO 21mm 250/50cm BS Doka formwork sheet 3-SO 21mm 300/50cm BS
5.3 7.9 10.5 13.1 15.8 18.4 21.0 23.6 26.3 28.9 31.5 10.5 15.8 21.0 26.3 31.5 36.8 42.0 47.3 52.5 57.8 63.0 7.9 10.5 13.1 15.8
186007000 186008000 186009000 186011000 186012000 186028000 186013000 186029000 186014000 186023000 186027000 186015000 186016000 186017000 186018000 186019000 186030000 186020000 186031000 186021000 186022000 186024000 186008100 186009100 186011100 186012100
Doka formwork sheet 3-SO 27mm 100/50cm Doka formwork sheet 3-SO 27mm 150/50cm Doka formwork sheet 3-SO 27mm 200/50cm Doka formwork sheet 3-SO 27mm 250/50cm Doka formwork sheet 3-SO 27mm 300/50cm Doka formwork sheet 3-SO 27mm 350/50cm Doka formwork sheet 3-SO 27mm 400/50cm Doka formwork sheet 3-SO 27mm 450/50cm Doka formwork sheet 3-SO 27mm 500/50cm Doka formwork sheet 3-SO 27mm 550/50cm Doka formwork sheet 3-SO 27mm 600/50cm Doka formwork sheet 3-SO 27mm 100/100cm Doka formwork sheet 3-SO 27mm 150/100cm Doka formwork sheet 3-SO 27mm 200/100cm Doka formwork sheet 3-SO 27mm 250/100cm Doka formwork sheet 3-SO 27mm 300/100cm Doka formwork sheet 3-SO 27mm 350/100cm Doka formwork sheet 3-SO 27mm 400/100cm Doka formwork sheet 3-SO 27mm 450/100cm Doka formwork sheet 3-SO 27mm 500/100cm Doka formwork sheet 3-SO 27mm 550/100cm Doka formwork sheet 3-SO 27mm 600/100cm Doka formwork sheet 3-SO 27mm 150/50cm BS Doka formwork sheet 3-SO 27mm 200/50cm BS Doka formwork sheet 3-SO 27mm 250/50cm BS Doka formwork sheet 3-SO 27mm 300/50cm BS
6.5 9.8 13.0 16.3 19.5 22.8 26.0 29.3 32.5 35.8 39.0 13.0 19.5 26.0 32.5 39.0 45.5 52.0 58.5 65.0 71.5 78.0 9.8 13.0 16.3 19.5
187007000 187008000 187009000 187011000 187012000 187028000 187013000 187029000 187014000 187023000 187027000 187015000 187016000 187017000 187018000 187019000 187030000 187020000 187031000 187021000 187022000 187024000 187008100 187009100 187011100 187012100
Doka-Schalungsplatte 3-SO 21mm
Doka-Schalungsplatte 3-SO 27mm
52
[kg]
Article n°
Doka formwork sheet 3-S eco 21mm 50/150cm Doka formwork sheet 3-S eco 21mm 50/200cm Doka formwork sheet 3-S eco 21mm 50/250cm Doka formwork sheet 3-S eco 21mm 50/300cm Doka formwork sheet 3-S eco 21mm 50/200cm BS Doka formwork sheet 3-S eco 21mm 50/250cm BS
7.9 10.5 13.1 15.8 10.5 13.1
186090000 186091000 186092000 186093000 186091100 186092100
Doka formwork sheet 3-S eco 27mm 50/150cm Doka formwork sheet 3-S eco 27mm 50/200cm Doka formwork sheet 3-S eco 27mm 50/250cm Doka formwork sheet 3-S eco 27mm 50/300cm Doka formwork sheet 3-S eco 27mm 50/97cm Doka formwork sheet 3-S eco 27mm 50/197cm Doka formwork sheet 3-S eco 27mm 50/200cm BS Doka formwork sheet 3-S eco 27mm 50/250cm BS Doka formwork sheet 3-S eco 27mm 50/197cm BS
9.8 13.0 16.3 19.5 6.3 12.8 13.0 16.3 12.8
187140000 187141000 187142000 187143000 187144000 187145000 187141100 187142100 187145100
Doka-Schalungsplatte 3-S eco 21mm
Doka-Schalungsplatte 3-S eco 27mm
Doka System Components | Formwork sheets
Article n°
Doka formwork sheet 3-S plus 21mm 9.7/200cm Doka formwork sheet 3-S plus 21mm 9.7/250cm Doka formwork sheet 3-S plus 21mm 20/200cm Doka formwork sheet 3-S plus 21mm 20/250cm
2.0 2.5 4.2 5.3
186109000 186110000 186107000 186108000
Doka formwork sheet 3-S plus 27mm 9.7/200cm Doka formwork sheet 3-S plus 27mm 9.7/250cm Doka formwork sheet 3-S plus 27mm 20/200cm Doka formwork sheet 3-S plus 27mm 20/250cm
2.5 3.1 5.2 6.5
187052000 187053000 187050000 187051000
Doka-Schalungsplatte 3-S plus 21mm
Doka-Schalungsplatte 3-S plus 27mm
[kg]
Article n°
Doka texture sheet 3-SO 21mm 250/50cm Doka texture sheet 3-SO 21mm 300/50cm Doka texture sheet 3-SO 21mm 400/50cm Doka texture sheet 3-SO 21mm 500/50cm Doka texture sheet 3-SO 21mm 600/50cm Doka texture sheet 3-SO 21mm 250/100cm Doka texture sheet 3-SO 21mm 300/100cm Doka texture sheet 3-SO 21mm 400/100cm Doka texture sheet 3-SO 21mm 500/100cm Doka texture sheet 3-SO 21mm 600/100cm
13.1 15.8 21.0 26.3 31.5 26.3 31.5 42.0 52.5 63.0
184034000 184035000 184037000 184039000 184041000 184001000 184002000 184003000 184004000 184005000
Doka texture sheet 3-SO 27mm 250/50cm Doka texture sheet 3-SO 27mm 300/50cm Doka texture sheet 3-SO 27mm 500/50cm Doka texture sheet 3-SO 27mm 600/50cm Doka texture sheet 3-SO 27mm 250/100cm Doka texture sheet 3-SO 27mm 300/100cm Doka texture sheet 3-SO 27mm 500/100cm Doka texture sheet 3-SO 27mm 600/100cm
16.3 19.5 32.5 39.0 32.5 39.0 65.0 78.0
184084000 184085000 184090000 184092000 184071000 184072000 184074000 184075000
Doka-Strukturplatte 3-SO 21mm
Doka-Strukturplatte 3-SO 27mm
Formwork sheets
[kg]
53
Formwork sheets | Doka System Components
[kg]
Article n°
[kg]
Article n°
Dokaplex formwork sheet 9mm 250/150cm Dokaplex formwork sheet 9mm 300/150cm
24.4 185001000 29.3 185006000
Xlife sheet 21mm 265/145cm Xlife sheet 21mm 325/145cm
Dokaplex formwork sheet 18mm 250/150cm Dokaplex formwork sheet 18mm 300/150cm
47.3 185011000 56.7 185012000
Xlife priming varnish SW-910 2.5l
2.7 185073000
Dokaplex formwork sheet 21mm 250/125cm Dokaplex formwork sheet 21mm 250/150cm Dokaplex formwork sheet 21mm 300/150cm
45.9 185007000 55.1 185002000 66.2 185003000
Xlife edge varnish 2.5l
3.2 185072000
Dokaplex-Schalungsplatte 9mm
Dokaplex-Schalungsplatte 18mm
Dokaplex-Schalungsplatte 21mm
Xlife priming varnish SW-910 2.5l
2.7 185073000
Xlife edge varnish 2.5l
3.2 185072000
Xlife-Grundierlack SW-910 2,5l
Xlife-Kantenlack 2,5l
54
Xlife-Platte 21mm
Xlife-Grundierlack SW-910 2,5l
Xlife-Kantenlack 2,5l
63.4 185071000 77.8 185070000
Doka System Components | Formwork sheets
Dokadur panel 21 200/50cm Dokadur panel 21 250/50cm Dokadur panel 21 200/50cm BS Dokadur panel 21 250/50cm BS Dokadur-Paneel 21
[kg]
Article n°
11.0 13.8 11.0 13.8
186083000 186081000 186083100 186081100
[kg] Coated birch plywood 21mm 250/125cm 220g
45.3 185024000
Coated plywood 21mm 250/125cm
32.8 185026000
Coated spruce 21mm 250/125cm
33.0 185027000
Beschichtetes Birkensperrholz 21mm 250/125cm 220g
Beschichtetes Sperrholz 21mm 250/125cm
Dokadur panel 27 200/50cm Dokadur panel 27 250/50cm Dokadur panel 27 200/50cm BS Dokadur panel 27 250/50cm BS Dokadur-Paneel 27
Stacking strap 50
13.5 16.9 13.5 16.9
187170000 187168000 187170100 187168100
Article n°
Beschichtete Spruce 21mm 250/125cm
3.1 586156000
Stapelgurt 50
Formwork sheets
Powder-coated, blue
55
Release agents Release agents | Doka System Components
Release agents The optimum way to separate formwork from concrete
A spraying device is used to quickly and easily apply a fine atomised spray onto the surface of the formwork.
56
Doka System Components | Release agents
For superior concrete results Doka offers release-agents for both absorbent and smooth formwork surfaces, that have an excellent separating effect and help to ensure visually appealing concrete faces.
Doka-Trenn Highly cost-efficient, thanks to its universal solution for all absorbent formwork surfaces Save time and money with Doka-Trenn • as it can be used so sparingly (up to 100 m²/l) • because it protects and cares for your formwork and so lengthens its lifespan • as it has excellent creep properties and can be used as a protective coating for construction equipment
Doka-OptiX The ideal release-agent for smooth formwork surfaces Doka-OptiX plus-points: • very easy to apply – is simply sprayed on with no need to wipe off any excess • easy-to-see “ready” signal – pouring can start once the white colour has disappeared Release agents
• makes for efficient working, as it is ready for concreting approx. 30 minutes after being applied, is “ready to separate” for up to 14 days thereafter, and can even be applied during light rainfall
Doka release-agent is available in practical containers of various sizes.
57
Release agents | Doka System Components
Article list Doka-Trenn in container of 1000l Doka-Trenn in drum of 200l Doka-Trenn in canisters of 25l Doka-Trenn in canisters of 5l Doka-Trenn
Sprayer for Doka-Trenn Doka-Trenn-Spritze
58
[kg]
Article n°
899.0 185.0 22.0 4.5
580911000 580912000 580913000 580915000
5.3 580914000
[kg] Doka-OptiX 210l Doka-OptiX 20l Doka-OptiX
Article n°
210.0 580916000 20.0 580917000
Release agents
Doka System Components | Release agents
59
Floor props Floor props | Doka System Components
Floor props Best “supporting role” on every site
The props’ high-grade materials and superlative workmanship ensure safety and efficient working. Their high load-bearing capacity is complemented by a wealth of practical details such as the “Eurex top” impact protector for extra-long service life.
60
Doka System Components | Floor props
The basis for safe, fast forming Doka floor props are the right choice for every usage situation, and a sturdy “support” in the rough-and-tumble of everyday work on the site. Patented hole numbering, anti-handtrap and anti-dropout safeguards, forged nuts, galvanised finish, ergonomically shaped fastening clamps – these are just some of the features of the Eurex top, Eurex and Eco floor props that have convinced customers the world over.
Floor prop Eurex top The first-ever floor prop with an impact protector from Doka The top-class floor prop with • unbeatably long service life, thanks to the impact protector • exceptionally easy-to-turn adjusting nut thanks to special thread geometry • less physical effort needed for shifting, thanks to new lightweight design to EN 1065 Class D/E • consistently high load capacity of 20 or 30 kN to EN 1065 Class D/E
Floor prop Eurex The dependable, site-proven floor prop
Floor props
The Eurex floor prop comes with all the main features and also conforms to EN 1065 Class D/E, with a constant 20 kN or 30 kN load capacity over its entire extension length. For many years now, this product has been a byword for customer satisfaction and confidence, and is justly known as the “classic” of good floor props.
Floor prop Eco The simple, low-cost floor prop Cost-efficient “support”, with • 20 kN load capacity at any extension length, to ÖNORM B4009 • can also be classified to EN 1065 Class A
Floor prop Eurex 60 The super-strong aluminium prop High loadability combined with great versatility, enabling use as a • sturdy floor prop with a load capacity of 60 kN up to a height of 5.50 m (and, with reduced load capacity, even up to 11.00 m) • handy plumbing strut for high wall formwork (extension range up to over 13.00 m)
61
Floor props | Doka System Components
Article list [kg]
Article n°
[kg]
Article n°
Doka floor prop Eurex 20 top 150
8.0 586096000
Doka floor prop Eurex 20 250
12.9 586086000
Doka floor prop Eurex 20 top 250
12.7 586086400
Doka floor prop Eurex 20 300
15.3 586087000
Doka floor prop Eurex 20 top 300
14.3 586087400
Doka floor prop Eurex 20 350
17.8 586088000
Doka floor prop Eurex 20 top 350
17.4 586088400
Doka floor prop Eurex 20 400
22.2 586089000
Doka floor prop Eurex 20 top 400
21.6 586089400
Doka floor prop Eurex 20 550
34.6 586090000
Doka floor prop Eurex 20 top 550
32.3 586090400
Doka floor prop Eurex 20 top 700
48.0 586139000
Height: 92 - 150 cm
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm Height: 298 - 550 cm
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 297 - 550 cm Doka-Deckenstütze Eurex 20
Galvanised
Height: 383 - 700 cm Doka-Deckenstütze Eurex 20 top
Galvanised
Doka floor prop Eurex 30 250
14.8 586092000
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 30 450
29.2 586119000
Height: 152 - 250 cm
Doka floor prop Eurex 30 top 250 Height: 148 - 250 cm
12.8 586092400
Height: 172 - 300 cm Height: 197 - 350 cm
Doka floor prop Eurex 30 top 300 Height: 173 - 300 cm
16.4 586093400
Height: 227 - 400 cm
Doka floor prop Eurex 30 top 350 Height: 198 - 350 cm
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 223 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Galvanised
Galvanised
Floor prop extension 0.50m
Deckenstützenverlängerung 0,50m Galvanised
Floor prop extension 0.50m
Deckenstützenverlängerung 0,50m Galvanised
62
5.5 586011000
5.5 586011000
Doka System Components | Floor props
[kg]
Article n°
Doka floor prop Eco 20 250
11.7 586134000
Doka floor prop Eco 20 300
13.0 586135000
Doka floor prop Eco 20 350
15.3 586136000
Doka floor prop Eco 20 400
19.1 586137000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm
Height: 227 - 400 cm Doka-Deckenstütze Eco 20
[kg] Doka floor prop Eurex 60 550 Doka-Deckenstütze Eurex 60 550
Article n°
47.0 582650000
Aluminium Height: 345 - 555 cm
Galvanised
Extension Eurex 60 2.00m Deckenstützenverlängerung 0,50m Galvanised
5.5 586011000
21.3 582651000
Verlängerung Eurex 60 2,00m
Powder-coated, blue Aluminium Length: 250 cm
Floor props
Floor prop extension 0.50m
Coupler Eurex 60
8.6 582652000
Kupplungsstück Eurex 60 Aluminium Length: 100 cm Diameter: 12.8 cm
63
Form-ties and suspension cones Form-ties and suspension cones | Doka System Components
Form-ties and suspension cones For all formwork tasks
With Doka anchoring system you can tie any wall, achieve watertight concrete and excellent concrete surfaces, and safely anchor climbing formwork and working and protection platforms to the concrete. In short, you are ideally equipped to handle all special anchoring and tying applications.
64
Doka System Components | Form-ties and suspension cones
Modern tying and anchoring technology Form-ties keep your formwork together. Modern tying and anchoring technology from Doka also keeps a tight grip on your costs. Doka is the reliable partner to turn to when it comes to form-ties, anchors and suspension points.
Economical right down to the last detail using state-of-the-art engineering Rely on tying and anchoring technology and suspension cones from Doka! • the high load capacity of Doka tie-rods lets you pour faster • Doka’s full line of accessories – including distance pieces, jacket tubes and anchoring cones – means that you have a single-source supplier, and less procurement work • on single-sided formwork, Doka pigtail anchors and Doka stop anchors safely transfer the concrete pressure into the concrete base slab Form-ties and suspension cones
Safe suspension-mounting with extremely strong, firm links between the structure and the formwork When it comes to quality, you can’t afford to compromise • for safe working on tall structures • on work and protection platforms such as the Folding platform K • on climbing and automatic climbing formwork • on dam formwork
The standard version of the Folding platform K is mounted with suspension cones.
65
Form-ties and suspension cones | Doka System Components
Article list [kg]
Article n°
Tie rod system 15.0
[kg] Fixing plate 15.0
0.15 581692000
Nagelblech 15,0
Tie rod 15.0mm galvanised 0.50m Tie rod 15.0mm galvanised 0.75m Tie rod 15.0mm galvanised 1.00m Tie rod 15.0mm galvanised 1.25m Tie rod 15.0mm galvanised 1.50m Tie rod 15.0mm galvanised 1.75m Tie rod 15.0mm galvanised 2.00m Tie rod 15.0mm galvanised .....m Tie rod 15.0mm non-treated 0.50m Tie rod 15.0mm non-treated 0.75m Tie rod 15.0mm non-treated 1.00m Tie rod 15.0mm non-treated 1.25m Tie rod 15.0mm non-treated 1.50m Tie rod 15.0mm non-treated 1.75m Tie rod 15.0mm non-treated 2.00m Tie rod 15.0mm non-treated 2.50m Tie rod 15.0mm non-treated 3.00m Tie rod 15.0mm non-treated 3.50m Tie rod 15.0mm non-treated 4.00m Tie rod 15.0mm non-treated 5.00m Tie rod 15.0mm non-treated 6.00m Tie rod 15.0mm non-treated 7.50m Tie rod 15.0mm non-treated .....m Ankerstab 15,0mm
0.72 1.1 1.4 1.8 2.2 2.5 2.9 1.4 0.73 1.1 1.4 1.8 2.1 2.5 2.9 3.6 4.3 5.0 5.7 7.2 8.6 10.7 1.4
581821000 581822000 581823000 581826000 581827000 581828000 581829000 581824000 581870000 581871000 581874000 581886000 581876000 581887000 581875000 581877000 581878000 581888000 581879000 581880000 581881000 581882000 581873000
Article n°
Galvanised Diameter: 10 cm
Positioning cone 15.0 5cm
0.43 581969000
Vorlaufkonus 15,0 5cm
Galvanised Length: 11 cm Diameter: 3 cm Tool: Positioning cone spanner 15.0 DK Follow fitting instructions!
Climbing cone 15.0 5cm
0.97 581980000
Kletterkonus 15,0 5cm
Galvanised Length: 17 cm Diameter: 6 cm Width-across: 41 mm Follow fitting instructions!
Sealing sleeve 15.0 5cm
0.007 581990000
Dichtungshülse 15,0 5cm
Black Length: 10 cm Diameter: 3 cm
She-bolt 15.0 5cm Wing nut 15.0
0.31 581961000
Flügelmutter 15,0
Galvanised Length: 76 cm Width-across: 24 mm Follow fitting instructions!
Galvanised Length: 10 cm Height: 5 cm Width-across: 27 mm
Super plate 15.0
0.91 581966000
Superplatte 15,0
She-bolt 15.0 5cm 1.20m
2.5 581832000
Ankerkopf 15,0 5cm 1,20m
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
Hexagon nut 15.0
1.7 581972000
Ankerkopf 15,0 5cm
Galvanised Length: 131 cm Width-across: 24 mm Follow fitting instructions!
0.23 581964000
Sechskantmutter 15,0 Galvanised Length: 5 cm Width-across: 30 mm
Cantilever positioning cone 15.0 5cm Sperrenvorlauf 15,0 5cm
Anchor plate 12/12
Length: 11 cm Diameter: 5 cm Tool: Positioning cone spanner 15.0 DK Follow fitting instructions!
1.3 581930000
Ankerplatte 12/12
Galvanised
Anchor plate 15/20
1.8 581929000
Ankerplatte 15/20
Sealing sleeve S 15.0 5cm
0.009 581697000
Dichtungshülse S 15,0 5cm
Black Length: 11 cm Diameter: 4.7 cm
Galvanised
Fair-faced concrete positioning cone 15.0 5cm Sichtbetonvorlauf 15,0 5cm
Angle anchor plate 12/18
1.3 581934000
Winkelplatte 12/18
Galvanised
66
0.45 581699000
0.46 581973000
Galvanised Length: 11 cm Diameter: 4.3 cm Tool: Positioning cone spanner 15.0 DK
Doka System Components | Form-ties and suspension cones
[kg]
0.88 581971000
Aufhängekonus 15,0 5cm
[kg] Positioning disk M30
Suspension cone 15.0 f. insulation up to 11cm Aufhängekonus 15,0 für Isolierung bis 11cm Galvanised Length: 30 cm Diameter: 5 cm
0.25 581975000
Vorlaufscheibe M30
Galvanised Length: 16 cm Diameter: 6 cm Follow fitting instructions!
Galvanised Diameter: 9 cm
3.6 580495000
Positioning clamp M30
0.19 581833000
Vorlaufklemme M30
Galvanised Diameter: 4 cm
Screw-in cone 30kN 15.0 Sealing sleeve 15.0 f. insulation up to 11cm Dichtungshülse 15,0 für Isolierung bis 11cm White Length: 30 cm Diameter: 6 cm
0.05 580498000
0.74 581895000
Einschraubkonus 30kN 15,0
Galvanised Length: 15 cm
Bridge edge beam anchor 30kN 15.0 Bridge edge beam anchor 30kN 15.0 galv. Gesimsanker 30kN 15,0
Cone screw RD 28
0.45 581896000 0.44 581890000
Length: 7 cm Follow fitting instructions!
0.65 580496000
Konusschraube RD 28
Article n°
Galvanised Length: 9 cm Diameter: 6 cm
Nailing cone 15.0 Positioning disk RD 28
0.25 580497000
Vorlaufscheibe RD 28
0.02 581897000
Nagelkonus 15,0
Black Length: 7 cm
Galvanised Diameter: 9 cm
Hole plug 29mm
0.003 581891000
Gesimsankerstopfen 29mm
Universal climbing cone 15.0 Universal-Kletterkonus 15,0
Galvanised Length: 13 cm Diameter: 5 cm Tool: Spanner for universal climbing cone 15.0/20.0
Cone screw B 7cm
Zinc plug 15.0
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
Sealing sleeve K 15.0
0.20 581889000
Zinkstöpsel 15,0
Galvanised Length: 9.9 cm Diameter: 2.9 cm Tool: Spanner for 1/2" square head
0.86 581444000
Konusschraube B 7cm
Stop anchor 15.0 11.5cm
0.77 581868000
Sperranker 15,0 11,5cm
Non-treated
0.03 581976000
Dichtungshülse K 15,0
Orange Length: 12 cm Diameter: 6 cm
Fair-faced concrete positioning cone MF 15.0 Sichtbetonvorlauf MF 15,0
Grey Diameter: 3 cm
1.3 581977000
Stop anchor 15.0 16cm
0.83 581997000
Sperranker 15,0 16cm
Non-treated
1.5 581928000
Galvanised Length: 12.6 cm Diameter: 5.3 cm Tool: Spanner for universal climbing cone 15.0/20.0
Stop anchor 15.0 40cm
1.4 581999000
Sperranker 15,0 40cm
Non-treated
67
Form-ties and suspension cones
Suspension cone 15.0 5cm
Article n°
Form-ties and suspension cones | Doka System Components
[kg] Stop anchor double-ended 15.0 20cm Sperranker beidseitig 15,0 20cm
Article n°
1.1 581820000
[kg] Water stop G 15.0 33cm
Pigtail anchor 15.0
Non-treated Length: 33 cm Width: 12 cm Height: 12 cm Custom lengths can be ordered under the special-component Art.n° 580100000, quoting the designation and the desired length in mm.
0.92 581984000
Wellenanker 15,0
Non-treated Length: 67 cm
0.68 581818000
Wassersperre G 15,0 33cm
Non-treated Custom lengths can be ordered under the special-component Art.n° 580100000, quoting the designation and the desired length in mm.
Article n°
Fibre concrete plug 30.7mm Fibre concrete plug 32mm Fibre concrete plug 45mm Fibre concrete plug 54mm
0.03 0.02 0.10 0.16
Faserbetonstopfen
581902000 581830000 581438000 581955000
Grey
Wall anchor 15.0 15cm
1.5 581893000
Wandanker 15,0 15cm
Galvanised
Concrete cone 52mm
0.19 581939000
Betonkonus 52mm
Grey
Suspension cone 15.0 with collar Bund-Aufhängekonus 15,0
1.4 580428000 Rod connector 15.0
Galvanised Length: 16 cm Diameter: 6 cm Follow fitting instructions!
Rock anchor spreader unit 15.0 Felsanker-Spreizeinheit 15,0
0.49 581981000
Verbindungsmuffe 15,0
Non-treated Length: 11 cm Diameter: 3 cm
0.41 581120000
Weldable coupler 15.0
0.25 581691000
Anschweißmuffe 15,0 Galvanised Length: 9 cm Diameter: 4 cm Follow fitting instructions!
Rock anchor installation tube Felsanker-Einbaurohr
0.85 581123000
Galvanised Length: 50 cm Diameter: 3 cm
Tensioning instrument B
Non-treated Length: 8 cm Diameter: 3 cm Safety instruction: Must not be welded with the tie-rod screwed in - risk of rod breakage!
Weldable coupler 15.0 for sheet wall
0.75 581693000
Anchor cone 15.0
0.46 581967000
Anschweißmuffe 15,0 für Spundwand Non-treated Length: 10 cm Height: 13 cm
34.5 580570000
Vorspanngerät B
Galvanised
Spannkonus 15,0
Yellow Length: 11 cm Diameter: 6 cm
Plastic tube 22mm 2.50m
0.45 581951000
Kunststoffrohr 22mm 2,50m
Water stop connector 15.0
0.52 581914000
Wasserstop 15,0
Non-treated Length: 12 cm
Universal cone 22mm Water stop 15.0 33cm Water stop S 15.0 33cm Wassersperre 15,0
1.3 581817000 1.2 581819000 Non-treated Length: 33 cm Diameter: 7 cm Custom lengths can be ordered under the special-component Art.n° 580100000, quoting the designation and the desired length in mm.
68
0.005 581995000
Universal-Konus 22mm
Grey Diameter: 4 cm
Doka System Components | Form-ties and suspension cones
[kg] Plug 22mm
Article n°
0.003 581953000
Verschlussstopfen 22mm
[kg] Clearance-cone dismantling tool Lösewerkzeug Freistellkonus
Grey
Distance piece 20cm Distance piece 25cm Distance piece 30cm
Positioning cone spanner 15.0 DK Vorlaufschlüssel 15,0 DK
Universal cone spanner 15.0/20.0
Faserbetonrohr 22mm
0.30 580579000
Galvanised Length: 8 cm Width-across: 30 mm
Grey
Fibre concrete tube 22mm 0.18m Fibre concrete tube 22mm 0.23m Fibre concrete tube 22mm 0.28m Fibre concrete tube 22mm 0.38m Fibre concrete tube 22mm 1.25m
0.67 581864000
Galvanised Length: 10.7 cm Width-across: 24 mm
0.05 581907000 0.09 581908000 0.10 581909000
Distanzhalter
Article n°
0.28 0.36 0.44 0.61 1.9
581904000 581905000 581906000 581903000 581991000
Universal-Konusschlüssel 15,0/20,0 Galvanised Length: 9 cm Width-across: 50 mm
Tie rod wrench 15.0/20.0
0.90 581448000
1.9 580594000
Ankerstabschlüssel 15,0/20,0
Fibre concrete plug 22mm
0.02 581992000
Faserbetonstopfen 22mm
Form tie load measuring device 300kN Ankerlastmessgerät 300kN
11.5 581834000
Galvanised
REPOXAL two component adhesive REPOXAL-Zweikomponenten Kleber
Form-ply protector for anchor 15.0 Schalhautschutz für Anker 15,0
1.2 581993000
0.25 580219000
Galvanised Width-across: 46 mm
Form-ply protector for cone 15.0 Schalhautschutz für Konus 15,0
Tie rod system 20.0 0.38 580220000
Width-across: 70 mm
Anchor holder 15.0
0.43 581835000
Ankerhalter 15,0
Ankerstab 20,0mm
Non-treated
Clearance cone 15.0
Tie rod 20.0mm galvanised 0.50m Tie rod 20.0mm galvanised 0.75m Tie rod 20.0mm galvanised 1.00m Tie rod 20.0mm galvanised 1.25m Tie rod 20.0mm galvanised 1.50m Tie rod 20.0mm galvanised 2.00m Tie rod 20.0mm galvanised .....m Tie rod 20.0mm non-treated 0.50m Tie rod 20.0mm non-treated 0.75m Tie rod 20.0mm non-treated 1.00m Tie rod 20.0mm non-treated 1.50m Tie rod 20.0mm non-treated 2.00m Tie rod 20.0mm non-treated .....m
1.3 1.9 2.5 3.2 3.8 5.0 2.5 1.3 1.9 2.5 3.8 5.0 2.5
581411000 581417000 581412000 581418000 581413000 581414000 581410000 581405000 581416000 581406000 581407000 581408000 581403000
0.51 581865000
Freistellkonus 15,0
Black Blue Length: 20.6 cm Diameter: 7 cm Follow fitting instructions!
Hexagon nut 20.0
0.60 581420000
Sechskantmutter 20,0 Galvanised Length: 7 cm Width-across: 41 mm
Anchor plate 20.0 12/12
1.7 581425000
Ankerplatte 20,0 12/12
Galvanised
69
Form-ties and suspension cones
Galvanised Length: 37 cm Diameter: 8 cm
Form-ties and suspension cones | Doka System Components
[kg] Super plate 20.0 B
Article n°
2.0 581424000
Superplatte 20,0 B
[kg] Concrete cone 52mm
0.19 581939000
Betonkonus 52mm
Galvanised Height: 7 cm Diameter: 14 cm Width-across: 34 mm
Grey
Positioning disk M30 She-bolt 20.0
5.6 581435000
Ankerkopf 20,0
0.25 581975000
Vorlaufscheibe M30
Galvanised Diameter: 9 cm
Galvanised Length: 140 cm Diameter: 5 cm Width-across: 41 mm
Positioning clamp M30
0.19 581833000
Vorlaufklemme M30
Anchoring cone 20.0
Galvanised Diameter: 4 cm
1.0 581437000
Ankerkonus 20,0
Galvanised Length: 15 cm Diameter: 5 cm Tool: Key for positioning cone 20.0
Sealing sleeve 20.0
Article n°
Pigtail anchor 20.0
2.0 581450000
Wellenanker 20,0
Non-treated Length: 76 cm
0.03 581441000
Dichtungshülse 20,0
Grey Length: 16 cm Diameter: 5 cm
Stop anchor 20.0 22cm
1.6 581452000
Sperranker 20,0 22cm
Non-treated
Water stop 20.0 33cm
1.7 581426000
Wassersperre 20,0 33cm
Non-treated Length: 33 cm Diameter: 8 cm Custom lengths can be ordered under the special-component Art.n° 580100000, quoting the designation and the desired length in mm.
Universal climbing cone 20.0 Universal-Kletterkonus 20,0
0.86 581444000
Konusschraube B 7cm
2.3 581453000
Sperranker 20,0 45cm
Non-treated
1.2 581442000
Galvanised Length: 13 cm Diameter: 5 cm Tool: Spanner for universal climbing cone 15.0/20.0
Cone screw B 7cm
Stop anchor 20.0 45cm
Plastic tube 26mm 2.00m
0.59 581463000
Kunststoffrohr 26mm 2,00m
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
Sealing sleeve K 20.0
0.03 581443000
Dichtungshülse K 20,0
Universal cone 26mm Grey Diameter: 5 cm
Green Length: 12 cm Diameter: 6 cm
Fibre concrete plug 35mm Fibre concrete plug 40mm
0.11 588923000 0.14 588924000
Faserbetonstopfen
Grey
70
0.008 581464000
Universal-Konus 26mm
Plug 26mm
0.006 581465000
Verschlussstopfen 26mm Grey
Doka System Components | Form-ties and suspension cones
[kg]
3.5 581471000
Konusschlüssel 20,0
[kg] Hexagon nut 26.5
0.73 581985000
Sechskantmutter 26,5
Galvanised Length: 57 cm
Galvanised Length: 8 cm Width-across: 46 mm
Anchor plate 26.5
3.4 581986000
Ankerplatte 26,5
Universal cone spanner 15.0/20.0
Universal-Konusschlüssel 15,0/20,0 Galvanised Length: 9 cm Width-across: 50 mm
Tie rod wrench 15.0/20.0
Galvanised Length: 15 cm Width: 12 cm
0.90 581448000
1.9 580594000
Ankerstabschlüssel 15,0/20,0
Universal climbing cone 26.5 Universal-Kletterkonus 26,5
Cone screw B 7cm
0.86 581444000
Konusschraube B 7cm
0.43 581427000
Ankerhalter 20,0
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
Non-treated
Sealing sleeve K 26.5
0.03 581998000
Dichtungshülse K 26,5
Clearance cone 20.0
Violet Length: 12 cm Diameter: 6 cm
0.49 581866000
Freistellkonus 20,0
Black Yellow Length: 20.6 cm Diameter: 7 cm Follow fitting instructions!
Clearance-cone dismantling tool Lösewerkzeug Freistellkonus
Rod connector 26.5
Ankerlastmessgerät 300kN
1.4 581988000
Verbindungsmuffe 26,5
Non-treated Length: 15 cm Width-across: 46 mm
0.67 581864000
Galvanised Length: 10.7 cm Width-across: 24 mm
Form tie load measuring device 300kN
1.1 581987000
Galvanised Length: 12.6 cm Diameter: 5 cm Tool: Spanner for universal climbing cone 15.0/20.0
Galvanised Length: 37 cm Diameter: 8 cm
Anchor holder 20.0
Article n°
Pigtail anchor 26.5
3.6 581900000
Wellenanker 26,5
Non-treated Length: 80 cm
11.5 581834000
Galvanised
Plastic tube 32mm 2.00m
0.60 581460000
Kunststoffrohr 32mm 2,00m
Diameter: 4 cm
Universal cone 32mm
Tie rod system 26.5 Tie rod 26.5mm non-treated .....m Ankerstab 26,5mm unbehandelt .....m
0.008 581461000
Universal-Konus 32mm
4.5 581883000
Grey Diameter: 5 cm
Universal cone spanner 15.0/20.0
Universal-Konusschlüssel 15,0/20,0 Galvanised Length: 9 cm Width-across: 50 mm
0.90 581448000
71
Form-ties and suspension cones
Cone spanner 20.0
Article n°
Form-ties and suspension cones | Doka System Components
[kg] Concrete cone 52mm
Article n°
0.19 581939000
Betonkonus 52mm
Grey
Tie rod wrench 20.0/26.5 Galvanised Length: 37 cm Diameter: 8 cm
Anchor holder 26.5
0.43 581943000
Ankerhalter 26,5
Non-treated
Clearance cone 26.5
0.46 581867000
Freistellkonus 26,5
Black Grey Length: 20.6 cm Diameter: 7 cm Follow fitting instructions!
Clearance-cone dismantling tool Lösewerkzeug Freistellkonus
0.67 581864000
Galvanised Length: 10.7 cm Width-across: 24 mm
Tie rod system 32.0 Tie rod 32.0mm non-treated .....m
6.5 582914000
Hexagon nut 32.0
1.8 582915000
Ankerstab 32,0mm unbehandelt .....m
Sechskantmutter 32,0 Non-treated Length: 9 cm Width-across: 55 mm
Anchor plate 32.0
4.1 582916000
Ankerplatte 32,0
Non-treated Length: 15 cm Width: 15 cm
Anchoring cone 32.0
7.7 582917000
Ankerkonus 32,0
Galvanised Length: 22.5 cm Diameter: 10 cm
72
Square spanner 32.0
Article n°
5.3 582918000
Vierkantschlüssel 32,0
Galvanised Length: 59 cm
1.7 580593000
Ankerstabschlüssel 20,0/26,5
[kg]
Form-ties and suspension cones
Doka System Components | Form-ties and suspension cones
73
Multi-trip packaging Multi-trip packaging | Doka System Components
Multi-trip packaging For improved logistics on the site
The bolt-on castor set makes the multi-trip packaging units mobile – and saves crane time when moving them around on the same level.
74
Doka System Components | Multi-trip packaging
For a tidier site Multi-trip packaging items such as containers, stacking pallets and skeleton transport boxes keep everything neat and tidy on the site, minimise the time wasted searching for parts and streamline the storage and transport of system components, small items and accessories. The stacking pallets simplify the storage and handling of floor props, folding tripods, formwork beams and Dokadur panels. The skeleton transport box is the tidy way of storing and handling lighter accessories (max. load 700 kg). For heavier accessories, there is plenty of space for these in the Multi-trip transport box (max. load 1500 kg).
Equipment and labour-cost savings on every project Save time and money by being able to • load and unload system components, small items and accessories much faster • easily shift equipment to where it is next needed
Multi-trip packaging
• safely store equipment in stacks, even where space is tight
Attaching the bolt-on castor set makes the stacking pallets mobile and lets you work quickly and ergonomically – it’s even possible to wheel them unhindered through doorways in residential structures.
75
Multi-trip packaging | Doka System Components
Article list [kg] Doka multi-trip transport box 1.20x0.80m
Article n°
75.0 583011000
Doka-Mehrwegcontainer 1,20x0,80m Galvanised Height: 78 cm Follow the directions in the "Operating Instructions"!
[kg] Doka stacking pallet 1.20x0.80m Doka-Stapelpalette 1,20x0,80m
3.7 583018000 5.5 583017000
Mehrwegcontainer Unterteilung
68.0 588478000
Frami-Palette 1,20m
Galvanised Length: 138 cm Width: 100 cm Height: 114 cm Follow the directions in the "Operating Instructions"!
Timber parts varnished yellow Steel parts galvanised
Doka accessory box
39.5 583016000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Frami pallet 1.20m Multi-trip transport box partition 0.80m Multi-trip transport box partition 1.20m
106.4 583010000
Doka-Kleinteilebox
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
Frami pallet 1.50m
74.0 588476000
Frami-Palette 1,50m
Galvanised Length: 168 cm Width: 100 cm Height: 114 cm Follow the directions in the "Operating Instructions"!
33.6 586168000
Anklemm-Radsatz B
Painted blue
Alu-Framax pallet
126.7 588396000
Alu-Framax-Palette
Doka skeleton transport box 1.70x0.80m Doka-Gitterbox 1,70x0,80m
Galvanised Length: 280 cm Width: 110 cm Height: 107 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
87.0 583012000
Galvanised Height: 113 cm Follow the directions in the "Operating Instructions"!
Pallet for platform brackets M Palette für Bühnenkonsolen M
74.9 580549000
Galvanised Length: 146 cm Width: 115 cm Height: 156 cm Follow the directions in the "Operating Instructions"!
Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
76
Article n°
Doka System Components | Multi-trip packaging
[kg] Pallet for Staxo/Aluxo
Article n°
[kg]
Article n°
64.6 582783000
Doka-Traggerüstpalette
Galvanised Length: 180 cm Width: 120 cm Height: 29 cm Follow the directions in the "Operating Instructions"!
Stacking strap 50
3.1 586156000
Stapelgurt 50
Multi-trip packaging
Powder-coated, blue
77
Accessories for fair-faced concrete Accessories for fair-faced concrete | Doka System Components
Accessories for fair-faced concrete Perfect finish, down to the last detail
How about giving it a try? Just ask for the Doka fair-faced concrete starter pack! In it, you’ll find sealing string, adhesive tape, sealing tape, fair-faced concrete universal cones, distance pieces, concrete plugs and sealing discs.
78
Doka System Components | Accessories for fair-faced concrete
Minor details, major impact Reliably casting concrete surfaces in the desired fair-faced concrete category is quite a challenge, every time. Doka has the right formwork equipment for all building-work where the surface of the concrete is intended to be a visual element. For perfect outcomes, even on details such as form-tie points and joins, Doka can offer a large number of different accessories for fair-faced concrete.
The reliable way to rise to “visibly” great challenges with useful accessories You can look forward to achieving • clean overall appearance • clean edges, joints, tie-holes and casting-cycle junctions
Accessories for fair-faced concrete
• a reduction in the amount of filling and smoothing work needed
With the right fair-faced concrete accessories from Doka, sharp edges, clean joints and attractive tie-hole closures are all perfectly feasible.
79
Accessories for fair-faced concrete | Doka System Components
Article list [kg]
Article n°
Doka System Sealing accessories Components
Fair-faced concrete distance piece 20cm Fair-faced concrete distance piece 25cm Fair-faced concrete distance piece 30cm Sichtbeton-Distanzhalter
0.05 581843000 0.06 581844000 0.07 581845000
Grey
Fair-faced concrete universal cone 22mm Sichtbeton-Universalkonus 22mm
0.005 581842000
Grey
Fair-faced concrete plug 22mm plastic Fair-faced concrete plug 22mm concrete Sichtbetonstopfen
0.008 581847000 0.02 581846000
Grey
Sealing disk 43 Sealing disk 50 Sealing disk 53
0.002 581836000 0.003 581837000 0.003 581838000
Dichtscheibe
Black
Sealing string D2cm 350m
3.8 581839000
Dichtschnur D2cm 350m
Adhesive tape PVC 50mm 33m
0.32 581841000
Sealing tape KS 10x3mm 10m Sealing tape KS 20x5mm 10m
0.07 581840000 0.17 580348000
Bauklebeband PVC 50mm 33m
Dichtungsband KS
Fair-faced concrete plug 41mm plastic Fair-faced concrete plug 41mm concrete Sichtbetonstopfen
0.007 581851000 0.05 581848000
Grey
Fair-faced concrete plug 52mm plastic Sichtbetonstopfen 52mm Kunststoff Grey
80
0.01 581850000
[kg]
Article n°
Accessories for fair-faced concrete
Doka System Components | Accessories for fair-faced concrete
81
Doka Wall Systems
Doka Wall Systems The right solution for every requirement
82
Doka Wall Systems
Doka offers a wide range of proven wall formwork systems for all jobsite situations, all fields of use, and all specifications regarding the concrete finish.
Page Framed formwork 84
Framed formwork Alu-Framax Xlife
100
Dokaset
110
Framed formwork Frami Xlife
124
Timber-beam formwork Large-area formwork Top 50
136
Wall formwork FF20
152
Large-area formwork Top 100 tec
162
Wall formwork FF100 tec
170
Circular formwork H20
178
Facade formwork Top 50
186
Column formwork Column formwork KS Xlife
194
Column formwork RS
202
Column formwork Top 50
210
Column formwork Framax Xlife
218
Column formwork Frami Xlife
226
Single-sided formwork Supporting construction frame
230
83
Doka Wall Systems
Framed formwork Framax Xlife
Framed formwork Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Framed formwork Framax Xlife Very cost-effective, thanks to high number of re-use cycles
The logical system-grid means that Framax Xlife framed formwork panels can be combined both vertically and horizontally whenever needed. Because of this, the gang-forms are always compact, and a neat joint pattern is left behind in the concrete – with no need for special stacking- or corner elements. Edeka logistics centre in Hamm, Germany Contractors: F. C. Trapp
84
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
For crane-assisted gang-forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency.
Reduced close-out costs thanks to superior product quality Highly economical, thanks to • its plastic-coated Xlife sheet • its rugged hot-dip galvanised and powder-coated steel frames • the fact that the Xlife sheet is so easy to clean and recondition
Swifter working Framed formwork Framax Xlife
due to the low form-tie count Wide spacing (up to 1.35 m) between form-ties means GSV tested
• shorter forming-times • lower labour costs
Easy handling and planning thanks to logical system-grid
Ladder system XS
The 15 cm grid, with only 5 different widths of panel, results in • optimum adaptability to every layout • compact gang-forms for short crane times • easy planning and logistics
Platform system Xsafe plus
• a neat joint pattern
High safety for your site The accident risk is reduced, and legally compliant working conditions are ensured, by
Xlife sheet
• the safe ladderways of the Ladder system XS • combining the formwork with the Platform system Xsafe Permissible fresh-concrete pressure 80 kN/m²
15 cm grid
85
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
System 30
45
60
90
135
Framax Xlife • The ingeniously co-ordinated panel formats let you get the greatest possible use out of the formwork
330
• The 15 cm grid, achieved with only 5 widths and 3 heights, simplifies planning, forming operations and logistics on the site 270
• The frames come with practical cross boreholes, for stopends, corners and columns 135
• The rugged galvanised steel frames ensure plane, even concrete faces
Framax Xlife sheet • Extremely high numbers of re-use cycles with superlative concreting results, for unparalleled cost efficiency and fewer changes of form-facing • No burst-off plywood chips, and less water absorbed through nail-holes, for longer service life • Special surface structure for less touching-up and reduced close-out costs • Timber-plastic composite sheet that can also be cleaned using a high-pressure washer
240
Framax extra-large panels 240 cm x 270 cm and 240 cm x 330 cm • For large-area formwork units, meaning fewer inter-panel connections and short repositioning times
270
330
• Both panels can be used facing one another in the upright • The large-area elements are especially suitable for producing fair-faced concrete
Closures With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that often only one closure per wall plane will be needed.
86
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
Shaft formwork with Stripping corner I
easy-to-turn spindles with a reinforcement rod or the convenient ratchet. It is then lifted and reset in one piece, thus saving crane-time. The Framax stripping corner I is also suitable for use on pilasters and as an inside corner on wall formwork.
The Framax stripping corner I was designed specifically for use with shaft formwork. It enables the formwork to be set up and stripped in accordance with accident protection regulations, i.e. without using the crane, simply by operating
Universal panel SCC
Framax 3-in-1 pole tool
This makes it possible to place self-compacting concrete (SCC) by pumping it into the formwork from below: It can be used for both walls and stop-ends.
135
Single-sided ties This ergonomically comfortable option for manipulating the ties from just one side of the formwork saves time and shortens the forming-times even further. Available for standard and extra-large panels.
87
Framed formwork Framax Xlife
57,5
The large, conical form-tie sleeves in the panels enable them to be stood at an angle on one or both sides, and to be height-mismatched.
57,5
The wide form-tie spacing of up to 1.35 m delivers huge cost-savings.
270 155
Tying
For operating the lifting hook safely from ground level, for plumbing and aligning the formwork and for pulling out double-headed nails
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Utilisation Integrated waling system Connector-rails across the entire width of the panel make quick and easy work of attaching accessories like panel struts, universal walings and pouring platforms, with no obligatory fixing points.
Joining, vertical stacking and end-shuttering
Joining
Vertical stacking
Universal walings
End-shuttering
A blow of the hammer is all it takes to join the elements. This makes for fast working, with no need for any additional tools.
Up to a panel height of 5.40 m, the panels can be stacked using Framax multifunction clamps only, with no need for universal walings. Simply tightening the multifunction clamp against the frame profile provides a self-aligning inter-panel connection.
provide improved rigidity, particularly on taller vertically stacked gangs. This also makes it possible for large gang-forms to be crane-lifted into the upright or set down by crane.
The special hole-grid in Framax Xlife universal panels makes them ideally suitable for cost-saving forming of outside corners, wall junctions, stop-ends and columns.
88
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
Corners and junctions
Safe pouring The wide working platforms make work both faster and safer. Framax pouring platforms can be unfolded very quickly and slotted into place ready for pouring to begin.
89
Framed formwork Framax Xlife
Corners at any angle, stopends and T-junctions can all be formed swiftly and dependably using the inside corners, hinged corners and versatile Universal panel from the Framax “construction kit”. This is the way to avoid costly field-built solutions.
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
References The wide form-tie spacing, of 1.35 m, and the large gang-forms together reduce the forming-times for large areas to a minimum. Möbel Lutz furniture warehouse, Wels, Austria Contractors: Weixelbaumer
Thanks to their consistent system logic, the panels of the Framax Xlife framed formwork system can be combined with one another both in the upright and on their sides. This results in a clearly defined joint pattern, which is ideal for concrete faces that have to meet special requirements. “FH Steyr” college of higher technical education in Steyr, Austria Contractors: Waizenauer & Ing. Schummer
90
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
Rectangular CIP columns can be formed at top speed with equipment that will in any case be available on the site. Only four universal panels are needed to achieve column cross-sections of up to 105 cm x 105 cm, in a 5 cm grid. The sturdy frames permit fresh-concrete pressures of up to 90 kN/m², allowing the formwork to be filled at high speed.
Framed formwork Framax Xlife
Nordpan-Rubner timber building panels factory, Austria Contractors: Walter Frey
The enlargement of the Europark shopping centre in Salzburg from 30,500 m² of sales floor-space to around 50,000 m² was one of the biggest jobsites in Austria at the time. The project also entailed the construction of one of Europe’s biggest basement car-parks, with 2,700 parking spaces on one level. Europark II, Austria Contractors: Alpine, DYWIDAG, Strabag
91
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Article list [kg]
Article n°
210.0 126.5 91.5 77.7 61.5 106.3 68.5 50.5 41.0 31.8 259.3 154.5 114.7 97.9 78.5
588100500 588102500 588104500 588106500 588108500 588110500 588112500 588114500 588116500 588118500 588221500 588222500 588223500 588224500 588225500
[kg]
Article n°
Doka Wall Framed formwork Systems Framax Xlife
Framax Xlife panel 1.35x2.70m Framax Xlife panel 0.90x2.70m Framax Xlife panel 0.60x2.70m Framax Xlife panel 0.45x2.70m Framax Xlife panel 0.30x2.70m Framax Xlife panel 1.35x1.35m Framax Xlife panel 0.90x1.35m Framax Xlife panel 0.60x1.35m Framax Xlife panel 0.45x1.35m Framax Xlife panel 0.30x1.35m Framax Xlife panel 1.35x3.30m Framax Xlife panel 0.90x3.30m Framax Xlife panel 0.60x3.30m Framax Xlife panel 0.45x3.30m Framax Xlife panel 0.30x3.30m Framax Xlife-Element
Framax Xlife panel 2.70x2.70m Framax Xlife-Element 2,70x2,70m
416.0 588109500
Galvanised
Galvanised, powder-coated Custom sizes on enquiry!
Framax Xlife panel 2.70x3.30m Framax Xlife-Element 2,70x3,30m
514.2 588608500
Galvanised
Framax Xlife panel 0.55x2.70m Framax Xlife panel 0.55x1.35m Framax Xlife panel 0.55x3.30m Framax Xlife-Element
87.0 588105500 46.5 588115500 107.5 588131500
Galvanised, powder-coated Corners marked in grey
Framax Xlife panel 2.40x2.70m Framax Xlife-Element 2,40x2,70m
370.0 588103500
Galvanised
Framax Xlife universal panel 0.90x2.70m Framax Xlife universal panel 0.90x1.35m Framax Xlife universal panel 0.90x0.90m Framax Xlife universal panel 0.90x3.30m Framax Xlife-Uni-Element
148.0 79.3 63.0 182.6
588122500 588124500 588120500 588228500
225.8 116.7 91.5 276.7
588601500 588603500 588604500 588671500
Galvanised, powder-coated Corners marked in blue
Framax Xlife panel 2.40x3.30m Framax Xlife-Element 2,40x3,30m
484.9 588606500
Galvanised
Framax Xlife universal panel 1.20x2.70m Framax Xlife universal panel 1.20x1.35m Framax Xlife universal panel 1.20x0.90m Framax Xlife universal panel 1.20x3.30m Framax Xlife-Uni-Element
Galvanised, powder-coated Corners marked in blue
92
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
[kg] Framax Xlife universal panel SCC 0.90x2.70m
Framax Xlife-Uni-Element SCC 0,90x2,70m Galvanised, powder-coated
Article n°
170.3 588119500
[kg] Framax hinged inside corner I 2.70m Framax hinged inside corner I 1.35m Framax hinged inside corner I 3.30m Framax-Scharnierecke I
Article n°
102.3 588136000 55.4 588137000 125.5 588610000
Powder-coated, blue
Framax hose to panel coupler SCC Framax-Spindelaufsatz SCC
10.0 588121000
Galvanised Length: 48 cm Diameter: 27 cm
Framax hinged outside corner A 2.70m Framax hinged outside corner A 1.35m Framax-Scharnierecke A
52.8 588134000 27.4 588135000
Powder-coated, blue
Panel closure tool D125 SCC Sperrschieber D125 SCC
18.0 588127000
Framax Xlife inside corner 2.70m Framax Xlife inside corner 1.35m Framax Xlife inside corner 3.30m Framax Xlife-Innenecke
97.0 588130500 51.2 588132500 117.9 588229500
Galvanised, powder-coated
Framax closure plate R30 2.70m Framax closure plate R30 1.35m Framax closure plate R30 0.90m Framax-Ausgleichsblech R30
43.0 588140000 21.4 588142000 14.4 588144000
Powder-coated, blue Width: 38 cm
Framax outside corner 2.70m Framax outside corner 1.35m Framax outside corner 3.30m Framax-Außenecke
Galvanised
47.0 588126000 23.5 588128000 58.0 588227000
Framax circular forming plate 0.20x2.70m Framax circular forming plate 0.25x2.70m Framax circular forming plate 0.30x2.70m Framax circular forming plate 0.20x1.35m Framax circular forming plate 0.25x1.35m Framax circular forming plate 0.30x1.35m Framax-Bogenblech
56.5 63.5 67.4 30.3 32.3 34.8
588235000 588236000 588237000 588238000 588239000 588240000
Galvanised, powder-coated
Framax steel waling RD 0.40m
Framax-Stahlwandriegel RD 0,40m Painted blue
8.7 588189000
93
Framed formwork Framax Xlife
Galvanised Length: 18 cm Width: 33 cm Height: 27 cm
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Framax stripping corner I 2.70m Framax stripping corner I 1.35m Framax stripping corner I 3.30m Framax-Ausschalecke I
Article n°
171.0 588675000 90.0 588614000 209.9 588676000
[kg] Framax stop-end tie
Article n°
1.5 588143000
Framax-Stirnanker
Galvanised Length: 29 cm
Galvanised, powder-coated
Framax pressure plate 6/15
0.80 588183000
Framax-Druckplatte 6/15
Galvanised
Framax universal waling 0.90m Framax universal waling 1.50m Framax stripping spindle I
3.2 588618000
Framax-Ausschalspindel I
Framax-Klemmschiene
10.6 588150000 16.8 588148000
Painted blue
Galvanised Height: 25 cm
Framax universal corner waling Framax stripping spindle I with ratchet
Framax-Ausschalspindel I mit Ratsche Galvanised Height: 24.8 cm
5.5 588653000
Framax-Eckklemmschiene
Painted blue Leg length: 60 cm
Framax wedge clamp Framax quick acting clamp RU Framax-Schnellspanner RU
3.3 588153400
1.5 588152000
Framax-Spannklemme
Galvanised Length: 21 cm
Galvanised Length: 20 cm
Framax tensioning wedge R Framax multi function clamp Framax-Uni-Spanner
5.8 588169000
0.20 588155000
Framax-Spannkeil R
Galvanised Height: 11 cm
Galvanised Length: 40 cm
Framax wedge bolt RA 7.5
0.34 588159000
Framax-Keilbolzen RA 7,5
Framax adjustable clamp
5.3 588168000
Framax-Ausgleichsspanner
Galvanised Length: 48 cm
Framax universal fixing bolt 10-16cm
0.60 588158000
Framax universal fixing bolt 10-25cm
0.69 583002000
Framax-Universalverbinder 10-16cm Galvanised Length: 26 cm
Framax-Universalverbinder 10-25cm Galvanised Length: 36 cm
94
12.8 588151000
Galvanised Length: 15 cm
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Panel strut 340 without prop head
24.0 580365000
(A) Plumbing strut 340
14.2 588247000
Elementstütze 340 ohne Stützenkopf consisting of:
(B) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
2.1 588245000
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
14.2 588247000
Galvanised Delivery condition: folded closed
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
Article n°
Galvanised Length: 190 - 341 cm
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
[kg]
7.2 588248000
Galvanised Length: 80 - 130 cm
A
Galvanised Delivery condition: folded closed B
Panel strut 540 without prop head
42.2 580366000
(A) Plumbing strut 540
29.6 588250000
Elementstütze 540 ohne Stützenkopf consisting of: Galvanised Length: 309 - 550 cm
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of:
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
10.2 588251000
Length: 171 - 224 cm
(C) Prop shoe
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
(B) Adjusting strut 220
A
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.2 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
B
C
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
95
Framed formwork Framax Xlife
C
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg]
Article n°
Eurex 60 550
[kg] Doka coil 16mm
Eurex 60 550 depending on length, comprising:
0.009 588633000
Doka-Coil 16mm
(A) Plumbing strut Eurex 60 550
Article n°
Galvanised Diameter: 1.6 cm
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
21.3 582651000
Powder-coated, blue Aluminium Length: 250 cm
Framax bracket 90
12.5 588167000
Framax-Konsole 90
(C) Coupler Eurex 60
Galvanised Width: 103 cm Height: 185 cm Delivery condition: railing included
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
Scaffold tube connection
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Height: 7 cm
Galvanised Length: 302 - 543 cm
(G) Prop head
0.27 584375000
Gerüstrohranschluss
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm Delivery condition: separate parts G
D
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm G
Framax pouring platform O 1.25/2.70m
117.0 588360000
Framax-Betonierbühne O 1,25/2,70m Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
96
0.31 588631000
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
[kg] Framax pouring platform U 1.25/2.70m
Article n°
127.5 588377000
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
[kg] Framax transport gear
13.3 588232000
Framax-Transportgehänge
Galvanised Follow the directions in the "Operating Instructions"!
Dokamatic lifting strap 13.00m Dokamatic-Umsetzgurt 13,00m
Handrail post 1.10m
10.5 586231000
Green Follow the directions in the "Operating Instructions"!
5.6 584384000
Schutzgeländer 1,10m
Article n°
Galvanised Height: 134 cm
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Framax fitting timber 2x12cm 2.70m Framax fitting timber 3x12cm 2.70m Framax fitting timber 5x12cm 2.70m Framax fitting timber 10x12cm 2.70m Framax fitting timber 2x12cm 3.30m Framax fitting timber 3x12cm 3.30m Framax fitting timber 5x12cm 3.30m Framax fitting timber 10x12cm 3.30m
3.1 4.7 7.8 15.5 3.8 5.7 9.5 19.0
176020000 176022000 176024000 176026000 176021000 176023000 176025000 176027000
7.6 8.0 8.4 9.3 9.8 10.2
176012000 176010000 176119000 176013000 176011000 176120000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Seitenschutzgeländer T
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
Framax lifting hook
10.6 588149000
Framax-Umsetzbügel
Galvanised Height: 22 cm Follow the directions in the "Operating Instructions"!
Framax stacking cone
Framax-Passholz
Varnished yellow
0.02 588234000
Framax-Stapelkonus
Blue Diameter: 2 cm
Doka 4-part chain 3.20m Doka-Vierstrangkette 3,20m
15.0 588620000 Follow the directions in the "Operating Instructions"!
Framax moulded timber 27mm 2.70m Framax moulded timber 21mm 2.70m Framax moulded timber 18mm 2.70m Framax moulded timber 27mm 3.30m Framax moulded timber 21mm 3.30m Framax moulded timber 18mm 3.30m Framax-Profilholz
Varnished yellow
Framax transport bolt 5kN Framax-Transportbolzen 5kN
1.9 588621000 Follow the directions in the "Operating Instructions"!
97
Framed formwork Framax Xlife
Side handrail clamping unit T
Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Framax formwork stripping timb. 10x12cm 2.85m Framax formwork stripping timb. 10x12cm 3.45m Framax-Ausschalholz
Article n°
16.4 176008000 19.9 176014000
[kg] Framax foundation clamp 0.90m
Framax-Fundamentspanner 0,90m Galvanised
Article n°
4.9 588141000
Varnished yellow
Framax steel closure plate 5cm 2.70m Framax steel closure plate 5cm 1.35m Framax steel closure plate 5cm 3.30m Framax-Stahlausgleich
14.0 588273000 7.9 588272000 17.2 588274000
Powder-coated, blue
Framax clamping bolt 4-8cm Framax-Klemmschraube 4-8cm
0.39 588107000
Galvanised Length: 19 cm
Doka perforated tape 50x2.0mm 25m Doka-Lochband 50x2,0mm 25m
Universal plug R20/25
17.0 588206000
0.003 588180000
Kombi Ankerstopfen R20/25 Blue Diameter: 3 cm
Connecting timber
0.70 176030000
Anklemmholz
Framax plug R24.5
Varnished yellow Width: 10 cm
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
0.003 588181000
Framax-Abdeckstopfen R24,5 Yellow Diameter: 2 cm
0.38 588170000
Plug for closure plate R25
0.003 588187000
Ausgleichsblechstopfen R25
Black Diameter: 3 cm
Framax frontal triangular ledge 2.70m Framax-Stirndreikantleiste 2,70m
1.9 588129000
1.4 588188000
Framax-Ankerhaltewinkel
Painted blue Width: 9 cm Height: 13 cm
98
4.2 588678000
Framax-Montagestange
Galvanised Length: 193 cm
Grey
Framax anchoring bracket
Framax 3-in-1 pole tool
Double scraper Xlife 100/150mm 1.40m Doppelschaber Xlife 100/150mm 1,40m
2.8 588674000
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife
[kg] Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Article n°
42.0 586151000
[kg] Framax combination nut 20.0 Framax-Kombimutter 20,0
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Article n°
6.5 588683000
Galvanised Width: 27 cm
Framax anchor nut 20.0
4.0 588687000
Framax-Ankermutter 20,0
Galvanised Width: 19 cm Doka-Stapelpalette 1,20x0,80m
39.5 583016000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Doka accessory box
106.4 583010000
Doka-Kleinteilebox
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Framed formwork Framax Xlife
Doka stacking pallet 1.20x0.80m
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Tying from one side only Framax combination nut 15.0 Framax-Kombimutter 15,0
5.5 588681000
Galvanised Width: 27 cm
Framax anchor nut 15.0
3.0 588684000
Framax-Ankermutter 15,0
Galvanised Width: 19 cm
99
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
Framed formwork Alu-Framax Xlife The crane-independent variant of Framax Xlife
Alu-Framax Xlife framed formwork is a complete system that includes high-performing safety and workplace accessories. Its lightweight panels can also be set up by hand, and fit into the logical grid of the Framax Xlife system. Detached home in Weyregg, Austria Contractors: Redl
100
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
Form economically with no need for a crane With its low weight, Alu-Framax Xlife brings all the benefits of Framax Xlife framed formwork to craneless jobsites as well – also seamlessly combined with Framax Xlife, of course.
Extra light and super-strong with torsion-proof hollow aluminium profiles Framed formwork Alu-Framax Xlife • delivers flat, plane concrete faces thanks to its sturdy aluminium frames • can be repositioned quickly, with or without crane assistance
Reduced close-out costs thanks to superior product quality Framed formwork Alu-Framax Xlife
Extremely long service life is ensured by • the plastic-coated Xlife sheet • the rugged, powder-coated aluminium frame
Easy handling and planning thanks to the logical system-grid The 15 cm grid, with only 5 different widths of panel, results in • optimum adaptability to every layout • easy planning and logistics • a neat joint pattern
Alu-Framax Xlife and Framax Xlife are fully compatible All accessories fit both systems
Lightweight aluminium
Optimise your site • by dividing it up into man-handled and crane-handled zones • with simplified site logistics Xlife sheet
High safety for your site The accident risk is reduced, and legally compliant working conditions are ensured, by • the safe ladderways of the Ladder system XS
Permissible fresh-concrete pressure 60 kN/m²
• combining the formwork with the Platform system Xsafe
15 cm grid
101
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
System 30
45
60
75
90
Alu-Framax Xlife • Ingeniously co-ordinated panel formats for maximising utilisation of the formwork
270
• 15 cm grid, with only five widths and two heights, simplifies planning, forming and logistics on the site
90
• The high-grade powder-coating on the Alu-Framax Xlife panels reliably prevents concrete adhesion • Integrated waling system: the connection profiles make it easy to attach accessories – with no obligatory fixing points
Framax Xlife sheet • Extremely high numbers of re-use cycles with superlative concreting results, for unparalleled cost efficiency and fewer changes of form-facing • No burst-off plywood chips, and less water absorbed through nail-holes, for longer service life • Special surface structure for less touching-up and reduced close-out costs • Timber-plastic composite sheet that can also be cleaned using a high-pressure washer
Alu-Framax pallets The practical Alu-Framax pallets make light work of offloading the panels at the site.
102
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
Framax circular forming plate
Framed formwork Alu-Framax Xlife
By combining Framax circular forming plates and Alu-Framax Xlife panels, it is possible to form polygonal curves.
Combining with Framax Xlife
Universal panel
Combining Framax Xlife with Alu-Framax Xlife makes it possible The Alu-Framax Xlife system also has a universal panel: with a to divide up the site into crane-handled and man-handled zones, width of 75 cm, this is ideal for columns, stop-ends and corners. making for more flexible logistics and a faster workflow on the site.
103
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
Article list [kg]
Article n°
68.8 55.7 47.8 40.1 30.0 25.6 21.6 17.8 15.4 11.5
588301500 588302500 588304500 588306500 588308500 588310500 588312500 588314500 588316500 588318500
[kg]
Article n°
Doka Wall Framed formwork Systems Alu-Framax Xlife
Alu-Framax Xlife panel 0.90x2.70m Alu-Framax Xlife panel 0.75x2.70m Alu-Framax Xlife panel 0.60x2.70m Alu-Framax Xlife panel 0.45x2.70m Alu-Framax Xlife panel 0.30x2.70m Alu-Framax Xlife panel 0.90x0.90m Alu-Framax Xlife panel 0.75x0.90m Alu-Framax Xlife panel 0.60x0.90m Alu-Framax Xlife panel 0.45x0.90m Alu-Framax Xlife panel 0.30x0.90m Alu-Framax Xlife-Element
Framax hinged inside corner I 2.70m Framax hinged inside corner I 0.90m Framax-Scharnierecke I
102.3 588136000 38.8 588352000
Powder-coated, blue
Powder-coated
Framax hinged outside corner A 2.70m Framax hinged outside corner A 0.90m Framax-Scharnierecke A
52.8 588134000 17.6 588350000
Powder-coated, blue
Alu-Framax Xlife panel 0.55x2.70m Alu-Framax Xlife panel 0.55x0.90m Alu-Framax Xlife-Element
44.4 588305500 17.1 588315500
Powder-coated
Alu-Framax Xlife universal panel 0.75x2.70m Alu-Framax Xlife universal panel 0.75x1.35m Alu-Framax Xlife universal panel 0.75x0.90m Alu-Framax Xlife-Uni-Element
64.2 588322500 33.8 588324500 27.0 588326500
Powder-coated Corners marked in blue
Alu-Framax Xlife inside corner 2.70m Alu-Framax Xlife inside corner 0.90m Alu-Framax Xlife-Innenecke
Framax closure plate R20 2.70m Framax closure plate R20 0.90m Framax-Ausgleichsblech R20
27.5 588340000 9.0 588344000
Powder-coated, blue Width: 26 cm
50.3 588330500 18.5 588332500
Powder-coated
Framax circular forming plate 0.20x2.70m Framax circular forming plate 0.25x2.70m Framax circular forming plate 0.30x2.70m Framax circular forming plate 0.20x0.90m Framax circular forming plate 0.25x0.90m Framax circular forming plate 0.30x0.90m Framax-Bogenblech
56.5 63.5 67.4 21.6 23.5 24.6
588235000 588236000 588237000 588241000 588242000 588243000
Galvanised, powder-coated
Framax outside corner 2.70m Framax outside corner 0.90m Framax-Außenecke
47.0 588126000 16.0 588336000
Galvanised
Framax steel waling RD 0.40m
8.7 588189000
Framax quick acting clamp RU
3.3 588153400
Framax-Stahlwandriegel RD 0,40m Painted blue
Framax-Schnellspanner RU
Galvanised Length: 20 cm
104
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
[kg] Framax multi function clamp Framax-Uni-Spanner
Article n°
5.8 588169000
Galvanised Length: 40 cm
Framax adjustable clamp
5.3 588168000
Framax-Ausgleichsspanner
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Galvanised Length: 48 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm Framax-Universalverbinder 10-16cm Galvanised Length: 26 cm
Framax universal fixing bolt 10-25cm
Framax-Universalverbinder 10-25cm Galvanised Length: 36 cm
Framax stop-end tie
0.60 588158000
0.69 583002000
Galvanised Length: 29 cm
Framax pressure plate 6/15
0.80 588183000
Framax-Druckplatte 6/15
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
1.5 588143000
Framax-Stirnanker
(D) Adjusting strut 120
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Galvanised
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540 Framax universal waling 0.90m Framax universal waling 1.50m Framax-Klemmschiene
10.6 588150000 16.8 588148000
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
Painted blue
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
Framax universal corner waling Framax-Eckklemmschiene
12.8 588151000
Painted blue Leg length: 60 cm
Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised Length: 21 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
105
Framed formwork Alu-Framax Xlife
Framax universal fixing bolt 10-16cm
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Article n°
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
[kg]
Article n°
Framax pouring platform O 1.25/2.70m
117.0 588360000
Framax pouring platform U 1.25/2.70m
127.5 588377000
Framax-Betonierbühne O 1,25/2,70m Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Framax bracket 90
12.5 588167000
Framax-Konsole 90
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
Galvanised Width: 103 cm Height: 185 cm Delivery condition: railing included
Side handrail clamping unit T Seitenschutzgeländer T
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Framax lifting hook
10.6 588149000
Framax-Umsetzbügel
Galvanised Height: 22 cm Follow the directions in the "Operating Instructions"!
Galvanised
Framax stacking cone
0.02 588234000
Framax-Stapelkonus
Blue Diameter: 2 cm
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Doka 4-part chain 3.20m Doka-Vierstrangkette 3,20m
15.0 588620000 Follow the directions in the "Operating Instructions"!
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
106
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
[kg] Framax transport gear
Article n°
13.3 588232000
Framax-Transportgehänge
Dokamatic-Umsetzgurt 13,00m
Framax steel closure plate 5cm 2.70m Framax steel closure plate 5cm 0.90m Framax-Stahlausgleich
Galvanised Follow the directions in the "Operating Instructions"!
Dokamatic lifting strap 13.00m
[kg]
Article n°
14.0 588273000 6.0 588271000
Powder-coated, blue
10.5 586231000
Green Follow the directions in the "Operating Instructions"!
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Connecting timber
0.70 176030000
Anklemmholz
Varnished yellow Width: 10 cm
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
Framax fitting timber 2x12cm 2.70m Framax fitting timber 3x12cm 2.70m Framax fitting timber 5x12cm 2.70m Framax fitting timber 10x12cm 2.70m Framax-Passholz
3.1 4.7 7.8 15.5
176020000 176022000 176024000 176026000
Framax frontal triangular ledge 2.70m Framax-Stirndreikantleiste 2,70m
Varnished yellow
1.4 588188000
Framax-Ankerhaltewinkel
Framax-Profilholz
7.6 176012000 8.0 176010000 8.4 176119000
Framax-Ausschalholz 10x12cm 2,85m Varnished yellow
Painted blue Width: 9 cm Height: 13 cm
Framax foundation clamp 0.90m
Framax-Fundamentspanner 0,90m Galvanised
Varnished yellow
Framax formwork stripping timb. 10x12cm 2.85m
1.9 588129000
Grey
Framax anchoring bracket
Framax moulded timber 27mm 2.70m Framax moulded timber 21mm 2.70m Framax moulded timber 18mm 2.70m
0.38 588170000
4.9 588141000
16.4 176008000
107
Framed formwork Alu-Framax Xlife
Fix-De-Fix remote uncoupling system 3150kg
Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Doka perforated tape 50x2.0mm 25m Doka-Lochband 50x2,0mm 25m
Article n°
17.0 588206000
[kg] Doka accessory box
Article n°
106.4 583010000
Doka-Kleinteilebox
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Universal plug R20/25
0.003 588180000
Kombi Ankerstopfen R20/25 Blue Diameter: 3 cm
Bolt-on castor set B Framax plug R24.5
0.003 588181000
Framax-Abdeckstopfen R24,5
33.6 586168000
Anklemm-Radsatz B
Painted blue
Yellow Diameter: 2 cm
Plug for closure plate R25
0.003 588187000
Ausgleichsblechstopfen R25
Black Diameter: 3 cm
Framax 3-in-1 pole tool
Doka Safety Systems 4.2 588678000
Framax-Montagestange
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Galvanised Length: 193 cm
Double scraper Xlife 100/150mm 1.40m Doppelschaber Xlife 100/150mm 1,40m
Alu-Framax pallet
2.8 588674000
126.7 588396000
Alu-Framax-Palette
Galvanised Length: 280 cm Width: 110 cm Height: 107 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
108
Framed formwork Alu-Framax Xlife
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife
109
Dokaset | Framed formwork | Doka Wall Systems
Dokaset The wall formwork that needs up to 50 % fewer ties
All the components of Dokaset are tailored for fast, easy operation. The makes this formwork highly cost-efficient, at the same time as giving users the very highest workplace safety. Housing development at Spindelbaumweg in Linz, Austria Contractors: Gebrüder Lang & Co
110
Doka Wall Systems | Framed formwork | Dokaset
The all-in-one wall formwork system that’s quick and easy to handle Dokaset is a fast, cost-saving wall formwork system for the building construction segment. All operations such as attaching the lifting chain and placing the form-ties can be carried out very quickly and easily from ground level. Fully pre-mounted working platforms, the revolutionary Xlife formwork sheet and wide tie spacing are among the practical features that set this all-in-one system apart.
The fastest formwork system for walls will speed up work at your site The advantages are plain to see… • up to 50 % fewer wall-ties than conventional framed formwork • shorter forming-times, as the formwork can be tied working from one side only • ready for use in a few simple steps
Superlative safety during forming and pouring ensures fast working and safe worksite conditions Ergonomic, safe working because • the crew can place the form-ties and attach the lifting chain working from ground level Dokaset
• ladders, working platforms and railings are all integrated in the system
Highly economical as it is easy to operate and extremely durable Ideal for many re-use cycles, thanks to • the small number of form-ties, that are quick and easy to operate • steel frames that are hot-dip galvanised both inside and out
Up to 50 % fewer wall-ties than conventional framed formwork systems
• the long-life, easy-to-clean Xlife sheet • the widely spaced form-ties, for short forming-times
The ultimate in flexibility
Formwork height up to 412 cm
for perfect adaptability to any on-site situation Versatile applicational range, as • it can easily be combined with Framax Xlife and Alu-Framax Xlife • it can be vertically stacked very quickly, using panels from the Framax Xlife “construction kit”
Xlife sheet
• the system features an integrated corner solution that does not need any extra ties
Permissible fresh-concrete pressure 80 kN/m²
111
Dokaset | Framed formwork | Doka Wall Systems
System 30 – 135
Dokaset • Rugged large-area panels, meaning a very low form-tie ratio • Integral platforms and ladders, providing exceptionally high workplace safety • Sturdy steel frames, galvanised both inside and out, for flat, plane concrete faces
277
• Stacking elements from the Framax Xlife “construction kit” permit formwork heights of up to 412 cm
270
135
30
40
60
Framax Xlife sheet • Extremely high numbers of re-use cycles with superlative concreting results, for unparalleled cost efficiency and fewer changes of form-facing • No burst-off plywood chips, and less water absorbed through nail-holes, for longer service life • Special surface structure for less touching-up and reduced close-out costs • Timber-plastic composite sheet that can also be cleaned using a high-pressure washer
Not many form-ties, and quick to operate Pressure ties at the top edge automatically keep the formworkhalves the right distance apart. These form-ties do not need to be operated. The tension ties can be operated from one side of the formwork, which is ergonomically convenient and saves a lot of time.
112
Doka Wall Systems | Framed formwork | Dokaset
Superlative safety during forming and pouring
Dokaset
The access route to the working platform is safeguarded thoroughly and well. An integrable ladder enables the crew to climb up and down quickly and safely. With its rear and side guard rails, the working platform provides all-round protection during pouring.
57,5
155 270
57,5
57,5
155 270
57,5
Wide form-tie spacing
Safe lifting and resetting
Wide spacing between the form-ties means fewer form-tie points. This saves on equipment, labour and costs, making for maximum efficiency.
The lifting chain can be reached from ground level – for the greatest workplace safety.
113
Dokaset | Framed formwork | Doka Wall Systems
135
277
30 – 135
Dokaset F – for the special requirements of the French market
270
135
The Dokaset F system
Safe ladderways
Dokaset F has been optimised for the special requirements of the French market. It comes with integrated safety accessories, is ready for immediate use and can easily be combined with Framax Xlife. Together with the non-rusting Framax Xlife sheet, this “all-in” formwork system ensures good concrete surfaces and is very service-friendly and durable.
The access route to the working platform is safeguarded thoroughly and well. Integrated ladders and flap-type openings in the platform decking enable the crew to climb up and down quickly and safely.
Safe working platforms The working platform is fitted with rear and side guard rails as standard. The all-round protection is complemented by a pull-out opposing guard-rail.
114
Doka Wall Systems | Framed formwork | Dokaset
Ready-assembled
Dokaset
On Dokaset F, all the safety accessories (platform, guard rails, ladderway, panel struts) are already mounted ready for immediate on-site deployment.
Framax Xlife sheet
For the ultimate in workplace safety
The Framax Xlife sheet does not cause any rust-spots, and ensures clean concrete faces.
Dokaset F meets the stringent safety requirements of the French market.
115
Dokaset | Framed formwork | Doka Wall Systems
References
Dokaset is the all-in-one system formwork for professional forming of walls. Its great ease of operation saves time and makes it the most cost-efficient alternative in the building construction segment. Housing development at Spindelbaumweg in Linz, Austria Contractors: Gebrüder Lang & Co
116
Dokaset
Doka Wall Systems | Framed formwork | Dokaset
Dokaset comes with all necessary safety components and is ready for use in next-to-no time. The form-ties are operated from one side, which saves time and is ergonomically convenient. Residential complex in Stockholm, Sweden Contractors: JM
117
Dokaset | Framed formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Wall Systems Dokaset
Dokaset panel 2.70x2.70m
835.0 588900000
Dokaset-Element 2,70x2,70m
Dokaset counter railing 2.70m Dokaset counter railing 1.35m
21.0 588741000 15.0 588742000
Dokaset-Gegengeländer
Galvanised Height: 282 cm
Height: 183 cm
Xsafe platform extension 0.55m
41.0 587734000
Xsafe-Bühnenverlängerung 0,55m
Timber parts varnished yellow Steel parts galvanised
Dokaset panel 2.70x2.70m with platform
986.0 588901000
Dokaset-Element 2,70x2,70m mit Bühne Galvanised Height: 282 cm Delivery condition: folded closed
Dokaset outside corner 3.30m Dokaset-Außenecke 3,30m
Dokaset panel 1.35x2.70m
283.0 588914000
454.0 588902000
Dokaset-Element 1,35x2,70m
Galvanised, powder-coated Height: 282 cm
Dokaset bottom angle for inside corner
Dokaset-Bodenwinkel für Innenecke Height: 7.5 cm
Dokaset ladder 2.70m
19.7 588904000
Dokaset-Leiter 2,70m
Dokaset panel 1.35x2.70m with platform
7.9 588913000
Galvanised Length: 212 cm Width: 37 cm
538.0 588903000
Dokaset-Element 1,35x2,70m mit Bühne Galvanised, powder-coated Height: 282 cm Delivery condition: folded closed
Dokaset counter railing holder Dokaset-Gegengeländerhalter
Length: 31 cm
118
4.0 588912000
Dokaset railing holder 30 degrees Dokaset railing holder 15 degrees Dokaset-Geländerhalter
Galvanised Height: 18 cm
2.0 588915000 2.0 588916000
Doka Wall Systems | Framed formwork | Dokaset
[kg] Handrail post 1.00m
Article n°
3.8 584335000
Geländer 1,00m
[kg] Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised Length: 124 cm
Article n°
Galvanised Length: 21 cm
Dokaset universal waling holder Dokaset-Klemmschienenhalter
1.5 588927000
Galvanised Length: 24.5 cm
Dokaset head anchor 12-36cm Dokaset-Kopfanker 12-36cm
4.7 588905000
Galvanised, powder-coated Length: 47 - 71 cm
Framax universal fixing bolt 10-16cm
0.60 588158000
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Framax-Universalverbinder 10-16cm Galvanised Length: 26 cm
Dokaset tension tie 10-30cm
13.0 588910000
Dokaset-Zuganker 10-30cm
Galvanised Length: 115 cm
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
3.9 588909000
Dokaset-Knarre 3/4" SW36
Galvanised Length: 100 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120 Dokaset tie hole reducer 20.0 Dokaset-Ankerlochreduktion 20,0
1.2 588911000
Galvanised Delivery condition: folded closed
Galvanised Length: 20 cm
Framax quick acting clamp RU Framax-Schnellspanner RU
7.2 588248000
Galvanised Length: 80 - 130 cm
3.3 588153400
Galvanised Length: 20 cm
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Framax multi function clamp Framax-Uni-Spanner
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
5.8 588169000
Galvanised Length: 40 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Framax universal waling 0.90m Framax universal waling 1.50m Framax-Klemmschiene
10.6 588150000 16.8 588148000
Galvanised Diameter: 1.6 cm
Painted blue
119
Dokaset
Dokaset ratchet 3/4" SW36
Dokaset | Framed formwork | Doka Wall Systems
[kg] Dokaset 2-part chain 1.50m
Article n°
4.8 588917000
Dokaset-Zweistrangkette 1,50m
Follow the directions in the "Operating Instructions"!
Doka 4-part chain 3.20m
[kg]
Article n°
Dokaset F Dokaset F panel 2.70x2.70m with platform
984.0 588721000
Dokaset F panel 2.70x2.70m
810.0 588720000
Dokaset F-Element 2,70x2,70m m. Bühne Galvanised Length: 284 cm Width: 270 cm Height: 40 cm Delivery condition: folded closed
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Dokaset closure cone 20cm
0.50 588925000
Dokaset-Verschlusskonus 20cm
Galvanised Length: 284 cm Width: 270 cm Height: 33 cm Delivery condition: folded closed
Length: 19.2 cm
Dokaset fibre concrete cone 30cm Dokaset-Faserbetonkonus 30cm
Dokaset F-Element 2,70x2,70m
0.10 588926000
Length: 29.2 cm
Fibre concrete plug 35mm Fibre concrete plug 40mm
0.11 588923000 0.14 588924000
Faserbetonstopfen
Grey
Double scraper Xlife 100/150mm 1.40m Doppelschaber Xlife 100/150mm 1,40m
120
Dokaset F panel 1.35x2.70m with platform
2.8 588674000
544.0 588723000
Dokaset F-Element 1,35x2,70m m. Bühne Galvanised, powder-coated Length: 284 cm Width: 135 cm Height: 48 cm Delivery condition: folded closed
Doka Wall Systems | Framed formwork | Dokaset
[kg]
412.0 588722000
Dokaset F-Element 1,35x2,70m
Galvanised, powder-coated Length: 284 cm Width: 135 cm Height: 38 cm Delivery condition: folded closed
Dokaset F sub panel 2.70x1.35m
360.0 588724000
Dokaset F sub panel 1.35x1.35m
194.0 588725000
Dokaset F-Unterstockelement 2,70x1,35m Galvanised, powder-coated Length: 141 cm Width: 270 cm Height: 33 cm
Dokaset F-Unterstockelement 1,35x1,35m Galvanised, powder-coated Length: 141 cm Width: 135 cm Height: 33 cm
Dokaset F spindle 10cm
[kg] Dokaset F back railing 2.70m Dokaset F back railing 1.35m Dokaset F-Rückengeländer
Article n°
66.0 588735000 55.0 588736000
Galvanised Delivery condition: folded closed
Dokaset F handrail lengthening piece 1.35m Dokaset F-Geländerverlängerung 1,35m Galvanised Length: 140 cm
Dokaset F ladder 2.70m
6.0 588733000
12.0 588737000
Dokaset F-Leiter 2,70m
Galvanised Length: 204 cm Width: 37 cm
Dokaset
Dokaset F panel 1.35x2.70m
Article n°
4.6 588732000
Dokaset F-Spindel 10cm
Galvanised Height: 27 cm
Dokaset F platform decking 2.70m Dokaset F platform decking 1.35m Dokaset F-Bühnenbelag
Galvanised Painted blue
112.0 588726000 72.0 588727000 Dokaset F ladder extension 1.35m
8.6 588728000
Dokaset F ladder step board
8.2 588738000
Dokaset F-Leiternverlängerung 1,35m Galvanised Length: 141 cm Width: 37 cm
Dokaset F-Leiterntrittbrett
Galvanised Length: 68 cm Width: 31 cm
121
Dokaset | Framed formwork | Doka Wall Systems
[kg] Xsafe ladder support
Article n°
1.1 587745000
Xsafe-Leiternstütze
[kg] Dokaset F supporting strut Galvanised Length: 108 cm
11.5 588729000
Dokaset F-Aufstocklasche
7.0 588730000
Dokaset F-Stützenstrebe
Galvanised Length: 19 cm
Dokaset F stacking plate
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Painted blue Length: 58 cm
Galvanised Length: 75.5 cm
Doka express anchor 16x125mm Framax quick acting clamp RU Framax-Schnellspanner RU
3.3 588153400
Doka-Expressanker 16x125mm
6.4 588734000
Dokaset-Box 30x26cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Galvanised Diameter: 1.6 cm
Universal plug R20/25
0.003 588180000
Kombi Ankerstopfen R20/25
Prop head
Blue Diameter: 3 cm
3.5 588244000
Stützenkopf
Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Dokaset 2-part chain 1.50m
4.8 588917000
Dokaset-Zweistrangkette 1,50m
Panel strut 540 without prop head
42.2 580366000
(A) Plumbing strut 540
29.6 588250000
Elementstütze 540 ohne Stützenkopf consisting of:
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Galvanised Length: 20 cm
Dokaset box 30x26cm
Article n°
Follow the directions in the "Operating Instructions"!
Galvanised Length: 309 - 550 cm
(B) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Lifting chain 100cm 15kN
1.8 587548000
Anschlagkette 100cm 15kN
Length: 103 cm Follow the directions in the "Operating Instructions"! Galvanised Delivery condition: folded closed
Doka stacking pallet 1.55x0.85m A
B
C
122
Doka-Stapelpalette 1,55x0,85m
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Doka Wall Systems | Framed formwork | Dokaset
[kg] Doka stacking pallet 1.20x0.80m Doka-Stapelpalette 1,20x0,80m
Article n°
[kg]
Article n°
39.5 583016000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Doka accessory box
106.4 583010000
Doka-Kleinteilebox
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Dokaset F-Ankermutter 20,0
2.0 588731000
Dokaset
Dokaset F anchoring nut 20.0 Galvanised Length: 13 cm
123
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
Framed formwork Frami Xlife The lightweight framed formwork for walls, columns and foundations
Frami Xlife is a complete system for forming walls, columns and foundations. Light enough to be man-handled, it is also strong enough for crane-assisted forming.
124
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
The new benchmark for cost efficiency Frami Xlife is ideal for fast, cost-saving forming both with and without a crane.
Saves time, cuts labour costs by being easy to clean and because of its system logic Frami Xlife has several features that make it extremely cost-efficient: • its Xlife sheet, which is much quicker and easier to clean and recondition • its 15 cm grid, which simplifies planning and maximises utilisation of the equipment • faster repositioning thanks to the clearly defined grid for the shifting units • shorter forming-times, as the system minimises any filler zones
High economy, maximum lifespan due to the Xlife sheet and galvanised hollow-section steel frames
Framed formwork Frami Xlife
The high product quality • lowers close-out and rehabilitation costs • ensures that the formwork system will have a long service life
Simplifies planning and handling as the system can be used in so many different ways The ingenious Frami Xlife formwork system gives you • huge flexibility, because you can combine panel heights from 1.20 m to 3.00 m • an efficient way of forming shafts, in conjunction with the Framax stripping corner I • rapid formwork planning using the professional Tipos-Doka software • cost-savings from reduced commissioning quantities
Xlife sheet
Permissible fresh-concrete pressure: 60 kN/m² up to 3.00 m; 67.5 kN/m² up to 2.70 m; 40 kN/m² up to 1.50 m
15 cm grid
125
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
System 30
45
60
75
90
Logical system grid • Logical system grid with heights from 1.20 m to 3.00 m and widths from 30 cm to 90 cm, for optimum adaptability to the structure
150 120
300 270
• 75 cm wide universal panel with a hole grid for use on stop-ends, outside corners and columns • Larger gang-forms can be stiffened with aligning clamps or universal walings, allowing them to be repositioned quickly and easily by crane
Hot-dip galvanised frames, Xlife sheet The frames of the panels are made of hard-wearing hollow steel profiles and are torsion-proof with no need for any extra stiffening. Their premium hot-dip galvanised finish gives them a particularly long lifespan. The Frami Xlife sheet delivers very high numbers of re-use cycles, with superb concreting results. Its special surface structure prevents flaking and swelling caused by nail-holes.
Frami clamp Just one blow of the hammer on the Frami clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces.
Infinite height offset The continuous hardware slot in the frame means that the Frami clamp can be fixed anywhere on the frame. Because of this, the panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.
126
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
Obtuse and acute-angled corners are formed using the Frami hinged inside corners.
With its 15 cm clamping range, the Frami adjustable clamp exactly matches the panel size-grid. This means that often only one closure per wall plane will be needed.
The Frami anchoring bracket relocates the top form-tie above the panel, which makes it easier to strike off the concrete.
Foundation anchoring system consisting of a flat tie-rod and a foundation clamp, for wall thicknesses of between 10 cm and 80 cm in a 5 cm grid – without any ties placed through the concrete and without any supporting timbers.
The bottom of the panel is fixed by foundation clamps and by a perforated tape with a 5 cm grid.
Framed formwork Frami Xlife
The Frami Xlife universal panel can be used to form right-angled corners up to a wall thickness of 45 cm, in a 5 cm grid.
The circular forming plate extends the applicational range of the panels to take in polygonal curves: an economical solution where the curve of the wall does not need to be strictly circular.
127
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
Utilisation T-junctions The Frami inside corner makes it easy to form T-junctions on walls.
The panels’ robust constructional design and asymmetrically arranged form-ties allow even 270 cm high panels to sustain the full hydrostatic concrete pressure.
128
38,5
45
111,5
130
270
300
111,5
920
38,5
Room-high panels
Only 3 form-ties are needed per 300 cm height of panel.
Dealing with a room height of 2.70 m or 3.00 m in a single pour – that’s cost efficiency for you! The extensive range of accessories also ensures safety when pouring.
The special hole-grid of the 75 cm wide Frami Xlife universal panels makes them suitable for economical forming of stop-ends, outside corners and columns.
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
Foundations
Framed formwork Frami Xlife
Placed on their sides, Frami Xlife panels are ideal for cost-saving forming of strip footings.
High-speed shaft formwork Using profile adapters, the Frami Xlife panels can easily be combined with the Framax stripping corner I to make an extraordinarily fast shaft formwork.
129
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
Article list [kg]
Article n°
19.5 24.0 29.5 33.5 39.0 24.8 22.9 35.5 38.0 46.5 40.3 49.5 60.5 69.5 79.2 45.0 54.3 65.0 76.5 86.5
588405500 588404500 588463500 588447500 588401500 588410500 588409500 588464500 588448500 588406500 588483500 588482500 588465500 588449500 588481500 588415500 588414500 588413500 588412500 588411500
[kg]
Article n°
11.0 12.9 23.8 25.0
588459000 588460000 588461000 588418000
Doka Wall Framed formwork Systems Frami Xlife
Frami Xlife panel 0.30x1.20m Frami Xlife panel 0.45x1.20m Frami Xlife panel 0.60x1.20m Frami Xlife panel 0.75x1.20m Frami Xlife panel 0.90x1.20m Frami Xlife panel 0.30x1.50m Frami Xlife panel 0.45x1.50m Frami Xlife panel 0.60x1.50m Frami Xlife panel 0.75x1.50m Frami Xlife panel 0.90x1.50m Frami Xlife panel 0.30x2.70m Frami Xlife panel 0.45x2.70m Frami Xlife panel 0.60x2.70m Frami Xlife panel 0.75x2.70m Frami Xlife panel 0.90x2.70m Frami Xlife panel 0.30x3.00m Frami Xlife panel 0.45x3.00m Frami Xlife panel 0.60x3.00m Frami Xlife panel 0.75x3.00m Frami Xlife panel 0.90x3.00m Frami Xlife-Element
Frami outside corner 1.20m Frami outside corner 1.50m Frami outside corner 2.70m Frami outside corner 3.00m Frami-Außenecke
Galvanised
Frami hinged inside corner I 1.20m Frami hinged inside corner I 1.50m Frami-Scharnierecke I
Galvanised Special struts T10 (over 355 to max. 540 cm) on inquiry.
33.5 588425000 40.0 588426000
Powder-coated, blue
Frami hinged outside corner A 1.20m Frami hinged outside corner A 1.50m Frami-Scharnierecke A
12.8 588429000 15.9 588430000
Powder-coated, blue
Frami Xlife universal panel 0.75x1.20m Frami Xlife universal panel 0.75x1.50m Frami Xlife universal panel 0.75x2.70m Frami Xlife universal panel 0.75x3.00m Frami Xlife-Uni-Element
39.0 49.5 83.5 93.0
588402500 588407500 588484500 588416500
Galvanised
Frami circular forming plate 0.20x1.50m Frami circular forming plate 0.25x1.50m Frami circular forming plate 0.30x1.50m Frami-Bogenblech
21.5 588486000 22.5 588487000 23.5 588488000
Powder-coated, blue
Frami anchoring panel 0.60x1.50m Frami anchoring panel 0.60x1.20m Frami-Ankerelement
37.8 588408000 32.1 588403000
Galvanised Corners marked in green
Frami anchor waling 0.40m
4.4 588489000
Frami-Ankerriegel 0,40m
Painted blue
Frami inside corner 1.20m 20cm Frami inside corner 1.50m 20cm Frami inside corner 2.70m 20cm Frami inside corner 3.00m 20cm Frami-Innenecke
Galvanised
130
25.3 30.7 51.6 57.4
588471000 588472000 588485000 588417000
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
Frami fitting timber 10x9cm 1.50m Frami fitting timber 5x9cm 1.50m Frami fitting timber 3x9cm 1.50m Frami fitting timber 2x9cm 1.50m Frami fitting timber 10x9cm 2.70m Frami fitting timber 5x9cm 2.70m Frami fitting timber 3x9cm 2.70m Frami fitting timber 2x9cm 2.70m Frami-Passholz
[kg]
Article n°
6.0 3.0 1.9 1.2 12.3 6.1 3.7 2.5
176035000 176034000 176033000 176032000 176083000 176082000 176081000 176080000
Varnished yellow
[kg] Framax quick acting clamp RU Framax-Schnellspanner RU
Article n°
3.3 588153400
Galvanised Length: 20 cm
Frami panel shoe
1.3 588490000
Frami-Elementschuh
Galvanised Length: 16 cm
Frami clamp Frami plywood support 21mm Frami plywood support 27mm Frami-Schalhautwinkel
2.1 588474000 2.0 588473000
1.2 588433000
Frami-Spanner
Galvanised Length: 11 cm
Galvanised Height: 56 cm
Frami aligning clamp
3.2 588435000
Frami-Richtspanner
Framax stripping corner I 2.70m Framax stripping corner I 1.35m Framax stripping corner I 3.30m Framax-Ausschalecke I
171.0 588675000 90.0 588614000 209.9 588676000
Galvanised, powder-coated
Frami adjustable clamp
3.6 588436000
Frami-Ausgleichsspanner
Galvanised Length: 40 cm
Frami universal waling 0.70m Frami universal waling 1.25m Frami-Klemmschiene
3.7 588439000 6.4 588440000
Painted blue
Framax stripping spindle I
3.2 588618000
Framax-Ausschalspindel I
Galvanised Height: 25 cm
Frami wedge clamp
1.1 588441000
Frami-Klemme
Framax stripping spindle I with ratchet
5.5 588653000
Frami tie-adapter for stripping corner I
0.47 588492000
Framax-Ausschalspindel I mit Ratsche Galvanised Height: 24.8 cm
Galvanised Length: 16 cm
Frami universal fixing bolt 5-12cm Frami-Ankeradapter für Ausschalecke I Galvanised Height: 11 cm
Frami-Universalverbinder 5-12cm
Galvanised Length: 23 cm
Frami profile connector 5-18cm Frami-Profilverbinder 5-18cm
Frami profile adapter for stripping corner I Frami-Profiladapter für Ausschalecke I Galvanised Height: 8 cm
0.60 588491000
0.43 588479000
0.80 588493000
Galvanised Length: 33 cm
131
Framed formwork Frami Xlife
Galvanised Length: 62 cm
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
[kg] Frami corner connector
Article n°
0.40 588446000
Frami-Eckverbinder
[kg] Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 19 cm
Frami lifting hook
Article n°
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
7.5 588438000
Frami-Umsetzbügel
Galvanised Width: 15 cm Height: 21 cm Follow the directions in the "Operating Instructions"!
Frami plumbing strut 260
13.9 588437000
Frami-Justierstütze 260
Galvanised Diameter: 1.6 cm
Frami bracket 60
24.0 580365000
(A) Plumbing strut 340
14.2 588247000
Frami adjustment frame
14.3 588451000
Frami-Standkonsole
Galvanised Length: 190 - 341 cm
Galvanised Length: 103 cm Height: 94 - 143 cm
7.2 588248000
Galvanised Length: 80 - 130 cm
(C) Prop shoe
7.7 588442000 Galvanised Length: 98 cm Height: 157 cm
Panel strut 340 without prop head
(B) Adjusting strut 120
0.009 588633000
Doka-Coil 16mm
Frami-Konsole 60
Galvanised Length: 145 - 258 cm
Elementstütze 340 ohne Stützenkopf consisting of:
Doka coil 16mm
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Handrail post 1.00m Galvanised Delivery condition: folded closed
3.8 584335000
Geländer 1,00m
Galvanised Length: 124 cm
A
B C
Frami strut head
1.4 508437002
Frami-Strebenkopf
Galvanised Width: 9 cm Height: 14 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
132
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Galvanised
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
[kg] Scaffold tube connection
Article n°
0.27 584375000
Gerüstrohranschluss
[kg]
Article n°
Doka perforated tape 50x2.0mm 25m
17.0 588206000
Supporting construction
10.7 588477000
Doka-Lochband 50x2,0mm 25m
Galvanised Height: 7 cm
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Frami frame hole plug
Abstützwinkel
Galvanised Length: 66 cm Width: 37 cm Height: 91 cm
0.002 588444000
Frami-Ankerstopfen
Blue Diameter: 2.5 cm
0.003 588445000
Frami-Abdeckstopfen
Doka 4-part chain 3.20m
Follow the directions in the "Operating Instructions"!
Yellow Diameter: 2 cm
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
15.0 588620000
Doka-Vierstrangkette 3,20m
0.38 588170000
Frami transport hook 2.5kN Frami anchoring bracket
0.58 588453000
Frami-Ankerhaltewinkel
Galvanised Length: 17.5 cm Follow the directions in the "Operating Instructions"!
Galvanised
Frami flat tie-rod 10-80cm
2.1 588475000
Frami-Flachanker 10-80cm
0.26 588434000
Frami-Stecker
Dokamatic-Umsetzgurt 13,00m
10.5 586231000
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Galvanised Width: 3 cm Height: 12 cm
Frami foundation clamp
Dokamatic lifting strap 13.00m
Green Follow the directions in the "Operating Instructions"!
Galvanised Length: 97 cm
Frami clip
0.56 588494000
Frami-Transporthaken 2,5kN
1.6 588452000
Frami-Fundamentspanner
Galvanised Height: 9 cm
Double scraper Xlife 100/150mm 1.40m Frami floor fixing plate
0.53 588495000
Frami-Bodenhalter
Doppelschaber Xlife 100/150mm 1,40m
2.8 588674000
Galvanised Length: 12.7 cm Width: 6.7 cm
133
Framed formwork Frami Xlife
Frami plug
Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
[kg] Frami pallet 1.20m
Article n°
68.0 588478000
Frami-Palette 1,20m
Galvanised Length: 138 cm Width: 100 cm Height: 114 cm Follow the directions in the "Operating Instructions"!
Frami pallet 1.50m
74.0 588476000
Frami-Palette 1,50m
Galvanised Length: 168 cm Width: 100 cm Height: 114 cm Follow the directions in the "Operating Instructions"!
Alu-Framax pallet
[kg]
Article n°
84.7 74.6 64.2 43.5 75.0 66.4 57.8 48.0 39.0 45.5 39.7 35.0 28.2 23.0 37.0 31.9 28.4 22.8 18.8
588411000 588412000 588413000 588415000 588481000 588449000 588465000 588482000 588483000 588406000 588448000 588464000 588409000 588410000 588401000 588447000 588463000 588404000 588405000
90.9 80.8 46.6 36.8
588416000 588484000 588407000 588402000
Framed formwork Frami Frami panel 0.90x3.00m Frami panel 0.75x3.00m Frami panel 0.60x3.00m Frami panel 0.30x3.00m Frami panel 0.90x2.70m Frami panel 0.75x2.70m Frami panel 0.60x2.70m Frami panel 0.45x2.70m Frami panel 0.30x2.70m Frami panel 0.90x1.50m Frami panel 0.75x1.50m Frami panel 0.60x1.50m Frami panel 0.45x1.50m Frami panel 0.30x1.50m Frami panel 0.90x1.20m Frami panel 0.75x1.20m Frami panel 0.60x1.20m Frami panel 0.45x1.20m Frami panel 0.30x1.20m Frami-Rahmenelement
Galvanised
126.7 588396000
Alu-Framax-Palette
Galvanised Length: 280 cm Width: 110 cm Height: 107 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Frami universal panel 0.75x3.00m Frami universal panel 0.75x2.70m Frami universal panel 0.75x1.50m Frami universal panel 0.75x1.20m Frami-Universalelement
Galvanised Corners marked in blue
Doka accessory box
106.4 583010000
Doka-Kleinteilebox
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Doka Safety Systems Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
134
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Framed formwork Frami Xlife
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife
135
Timber-beam formwork Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
Large-area formwork Top 50 The large-area formwork for all shapes and loads
“Hovering” on 10 conical pillars, this structure came with some stringent quality specifications for the fair-faced concrete. Alongside Doka framed and column formwork systems, 9000 m² of custom-manufactured formwork for the cones were the “icing on the cake” on this project – owing to the complicated shapes, many of these formwork items were used only once each. Phaeno Science Centre, Germany Contractors: Heitkamp
136
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
Immense flexibility with only three system components Large-area formwork Top 50 is a customisable “construction kit” formwork system designed to accomplish many very diverse types of task. The shape, size, tie-hole pattern and form-facing of the elements can be adapted to suit any requirement.
Versatility for all shapes and loads The “construction kit” timber-beam formwork for • any architectural requirement • any formwork pressure • any type of form-facing • any tie-hole pattern
Fast, efficient working Large-area formwork Top 50
thanks to optimised formwork solutions Cost-efficient project implementation thanks to • individualised solutions • high numbers of re-use cycles • short forming-times • large, optimised shifting units
Cost-certainty from custom-built formwork Pre-assembly by Doka’s unique Ready-to-Use Service gives you
Ladder system XS
• a perfect joint pattern thanks to the precision element joints • time and space savings at the site • exactly matching elements with no need for any finishing work • special solutions for bridge, tunnel and industrial construction
Platform system Xsafe plus
Extremely high safety thanks to safe workplace access routes Large-area formwork Top 50 is easy to combine
Execution of (shell) construction work
• with practical Doka safety products such as the new Doka platform system Xsafe plus or the Ladder system XS
Can be dimensioned for any fresh-concrete pressure and any shape
137
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
System Top 50 in detail The Doka formwork beams H20 (1) and the steel walings (2) are spaced closer together or further apart, depending upon what loads are expected. The form-facing (3) is freely selectable, to meet widely differing requirements.
Formwork built by the Ready-to-Use Service The individual parts of the Top 50 system can quickly be assembled into site-ready elements by means of easy-to-use connecting devices: This saves on assembly costs. Having the elements pre-assembled by the Doka Ready-to-Use Service ensures top-quality, meaning precision element joints and a first-class joint pattern, even with challenging geometries. For high numbers of repeat uses, fielding Large-area formwork Top 50 pays off even more.
Free choice of form facing and form-tie pattern With the Top 50 system, all architectural specifications can be fulfilled.
138
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
Utilisation Fair-faced concrete
Large-area formwork Top 50
Because it can be used with any form facing and adapts to any shape of structure, Large-area formwork Top 50 is particularly suitable for forming concrete that has to meet stringent specifications regarding its surface finish (i.e. fair-faced concrete).
Out-of-the-ordinary facades
Sharp edges, smooth surfaces
Domino ESP Berne, Switzerland
City Tunnel, Leipzig, incl. underground stations, Germany
139
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
References The “construction-kit” system of Large-area formwork Top 50 opens up the entire range of possible uses, up to and including cantilever formwork for bridge superstructures with varying cross-sections. Danube bridge at Traismauer Contractors: Alpine
For unusual specifications regarding the concrete finish, the Large-area formwork Top 50 is the system of choice. Friedetal bridge near Sollstedt, Germany Contractors: Gerdum & Breuer
140
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
Customised solutions with large shifting units maximise utilisation of the equipment, shorten the repositioning and setting-up times and thus cut the forming costs. Tour CMA, France Contractors: GTM
Large-area formwork Top 50
Avalanche gallery at Goldschrofen, Austria Contractors: Thurner
Even complex structural shapes can be formed using only a small number of standard components. Combinability with Doka climbing formwork comes as part of the system – for highly economical solutions. Thornton Bank wind turbines, Belgium Contractors: MBG
141
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
10.2 14.9 19.6 24.7 29.7 35.0 38.9 44.2 48.7 54.2 60.2 68.4 79.4 89.1 102.0 112.4 118.0
580001000 580002000 580003000 580004000 580005000 580006000 580007000 580008000 580009000 580010000 580011000 580012000 580013000 580014000 580015000 580016000 580017000
[kg]
Article n°
24.0 29.0 40.0 48.0 58.0 67.0 72.1 86.0 89.9 107.0
582875000 582876000 582877000 582878000 582879000 582880000 582881000 582882000 582883000 582888000
Doka Wall Systems Large-area formwork Top 50
Multi-purpose waling WS10 Top50 0.50m Multi-purpose waling WS10 Top50 0.75m Multi-purpose waling WS10 Top50 1.00m Multi-purpose waling WS10 Top50 1.25m Multi-purpose waling WS10 Top50 1.50m Multi-purpose waling WS10 Top50 1.75m Multi-purpose waling WS10 Top50 2.00m Multi-purpose waling WS10 Top50 2.25m Multi-purpose waling WS10 Top50 2.50m Multi-purpose waling WS10 Top50 2.75m Multi-purpose waling WS10 Top50 3.00m Multi-purpose waling WS10 Top50 3.50m Multi-purpose waling WS10 Top50 4.00m Multi-purpose waling WS10 Top50 4.50m Multi-purpose waling WS10 Top50 5.00m Multi-purpose waling WS10 Top50 5.50m Multi-purpose waling WS10 Top50 6.00m Mehrzweckriegel WS10 Top50
Multi-purpose waling SL-1 WU16 0.625m Multi-purpose waling SL-1 WU16 0.75m Multi-purpose waling SL-1 WU16 1.00m Multi-purpose waling SL-1 WU16 1.25m Multi-purpose waling SL-1 WU16 1.50m Multi-purpose waling SL-1 WU16 1.75m Multi-purpose waling SL-1 WU16 2.00m Multi-purpose waling SL-1 WU16 2.25m Multi-purpose waling SL-1 WU16 2.50m Multi-purpose waling SL-1 WU16 3.00m Mehrzweckriegel SL-1
Painted blue
Painted blue
Corner waling 20
23.5 580031000
Eckriegel 20
Painted blue Leg length: 52 cm
Multi-purpose waling WU12 Top50 1.00m Multi-purpose waling WU12 Top50 1.25m Multi-purpose waling WU12 Top50 1.50m Multi-purpose waling WU12 Top50 1.75m Multi-purpose waling WU12 Top50 2.00m Multi-purpose waling WU12 Top50 2.50m Multi-purpose waling WU12 Top50 3.00m Multi-purpose waling WU12 Top50 3.50m Multi-purpose waling WU12 Top50 4.00m Mehrzweckriegel WU12 Top50
25.3 32.0 37.5 44.2 50.0 63.1 75.7 90.7 103.4
580018000 580019000 580020000 580021000 580022000 580023000 580024000 580025000 580026000
10.4 15.4 20.2 25.0 30.3 35.8 40.2 46.1 51.0 56.1 60.4 71.5 82.1 92.2 102.0 112.4 122.2
580038000 580039000 580040000 580041000 580042000 580043000 580044000 580045000 580046000 580047000 580048000 580050000 580052000 580054000 580056000 580058000 580060000
Shaft corner waling WS10 Top50 .....m Eckwandriegel WS10 Top50 .....m
Painted blue Project-specific! Also available in profiles of thickness U120 (Order designation: WU12).
Painted blue
Steel waling WS10 Top50 0.50m Steel waling WS10 Top50 0.75m Steel waling WS10 Top50 1.00m Steel waling WS10 Top50 1.25m Steel waling WS10 Top50 1.50m Steel waling WS10 Top50 1.75m Steel waling WS10 Top50 2.00m Steel waling WS10 Top50 2.25m Steel waling WS10 Top50 2.50m Steel waling WS10 Top50 2.75m Steel waling WS10 Top50 3.00m Steel waling WS10 Top50 3.50m Steel waling WS10 Top50 4.00m Steel waling WS10 Top50 4.50m Steel waling WS10 Top50 5.00m Steel waling WS10 Top50 5.50m Steel waling WS10 Top50 6.00m Stahlwandriegel WS10 Top50
Painted blue
20.5 580069000
Angular waling WS10 Top50 .....m Winkelriegel WS10 Top50 .....m
21.5 580068000
Painted blue Project-specific! Also available in profiles of thickness U120 (Order designation: WU12).
Flange clamp H20
1.0 580135000
Flanschklammer H20
Galvanised Width: 13 cm Width-across: 19 mm
Steel waling WU12 Top50 1.00m Steel waling WU12 Top50 1.25m Steel waling WU12 Top50 1.50m Steel waling WU12 Top50 1.75m Steel waling WU12 Top50 2.00m Steel waling WU12 Top50 2.50m Steel waling WU12 Top50 3.00m Steel waling WU12 Top50 3.50m Stahlwandriegel WU12 Top50
Painted blue
142
25.3 31.6 37.9 44.2 50.5 63.1 75.7 88.4
580085000 580086000 580087000 580088000 580089000 580091000 580092000 580093000
Flange clamp G
1.1 580120000
Flanschklammer G
Galvanised Width: 13 cm Width-across: 19 mm
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
[kg] Flange claw
Article n°
1.0 580137000
Flanschkralle
[kg] Formwork element connector FF20/50 Z Elementverbinder FF20/50 Z
Galvanised Width: 17 cm Width-across: 19 mm
0.22 580114000
Riegelklammer H20
6.0 587533000
Painted blue Length: 55 cm
Adjustable waling extension 1.40m Top50 Waling clamp H20
Article n°
Ausgleichslasche 1,40m Top50
15.0 580075000
Painted blue
Galvanised Width: 8 cm Width-across: 13 mm
Beam screw S 8/60
0.06 580116000
Riegelverschraubung S 8/60 Galvanised Length: 7 cm Width-across: 13 mm
Beam screw H 8/70
Adjustable waling extension FF20/50 Ausgleichslasche FF20/50
9.1 587532000
Painted blue Length: 87 cm
0.06 580117000
Riegelverschraubung H 8/70
Beam clamp Top50 Fastening plate
2.7 580110000
Anschraublasche
1.2 580081000
Trägerklammer Top50
Painted blue Height: 15 cm
Painted blue Width: 13 cm Height: 15 cm
Anchoring plate FF20/50 Protective cap H20
0.36 587248000
Stirnschuh H20
Painted blue Length: 55 cm
Galvanised Length: 20 cm Width: 7 cm
Lifting bracket
6.2 580460000
Kranöse
6.6 587531000
Ankerungslasche FF20/50
Half splice plate
5.5 580267000
Halblasche
Galvanised Height: 59 cm
Painted blue Length: 78 cm
Splice plate with join adjustment Splice plate Top50 Z
8.5 580074000
Verbindungslasche Top50 Z Painted blue Length: 76 cm
Verbindungslasche mit Fugenjustierung Painted blue Length: 76 cm
Offset plate FF20
6.2 587534000
Versatzlasche FF20
Formwork element connector FF20/50 Elementverbinder FF20/50
Painted blue Length: 55 cm
6.3 587530000
13.8 580215000
Painted blue Length: 35 cm Width: 18 cm Height: 4 cm
143
Large-area formwork Top 50
Galvanised Length: 8 cm Width-across: 13 mm
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
[kg] Internal angle plate H20 Top50 Innenecklasche H20 Top50
Article n°
11.3 580035000
[kg] Universal angle tie bracket
Corner plate H20/H36 Top50
Painted blue Length: 20 cm
10.0 580078000
Ecklasche H20/H36 Top50
4.4 580604000
Universal-Winkelspanner
Painted blue Length: 80 cm Width: 38 cm
Angle tie bracket 20,0 SL-1 WU16 Winkelspanner 20,0 SL-1 WU16
Lifting bracket for column formwork 9.6 580262000
Verschiebelasche
Kranöse für Stützenschalung
16.0 588654000 15.8 588656000
Übergangslasche
65.0 580607000
Galvanised, powder-coated Length: 85 cm Width: 85 cm
Painted blue Leg length: 60 cm
Transition plate 18mm Transition plate 21mm
8.1 587543000
Painted blue Length: 24 cm
Painted blue Length: 49.7 cm Width: 45.1 cm
Shaft waling squaring plate
Article n°
Articulated conn. plate A Top50 ..... degrees Gelenklasche A Top50 ..... Grad
20.0 580208000
Galvanised Leg length: 36 cm
Painted blue Length: 54 cm Width: 30 cm Height: 51 cm
Swivel joint plate
20.0 587542000
Drehgelenklasche
Galvanised Length: 155 cm
Waling connector SL-1 WU16 0.75m
31.0 582886000
Corner spindle
17.5 580264000
Riegelverbinder SL-1 WU16 0,75m Galvanised Length: 75 cm
Connecting pin 10cm Eckspindel
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
Galvanised Length: 65 cm Height: 31 cm
Connecting pin 25cm
0.58 580202000
Verbindungsbolzen 25cm
Corner connecting plate 90/50 Winkellasche 90/50
Galvanised Length: 25 cm
13.8 580603000
Painted blue Length: 51 cm Width: 40 cm
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
144
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
[kg] Stacking plate H20
Article n°
8.3 580310000
Aufstocklasche H20
Galvanised Length: 68.8 cm
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe Inside corner plate 3.00m Inside corner plate 4.00m
53.0 580282000 69.0 580284000
Eckschiene
Powder-coated, blue
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
Joint plate 3.00m Joint plate 4.00m
36.8 580332000 51.2 580334000
Ausgleichsschiene
Powder-coated, blue
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Grey
145
Large-area formwork Top 50
Galvanised Delivery condition: folded closed
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
[kg]
Article n°
Eurex 60 550
[kg] Universal dismantling tool
Eurex 60 550 depending on length, comprising:
3.7 582768000
Universal-Lösewerkzeug
(A) Plumbing strut Eurex 60 550
Article n°
Galvanised Length: 75.5 cm
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
Doka express anchor 16x125mm
(C) Coupler Eurex 60
8.6 582652000
Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60
0.31 588631000
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm
(G) Prop head
3.5 588244000
Universal bracket 60
14.0 580477000
Universal-Konsole 60
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Galvanised Length: 86 cm Height: 181 cm Delivery condition: separate parts G
D
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
G
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
Galvanised Length: 101 cm Height: 159 cm
Prop head Eurex 60 Top50
7.1 582665000
Stützenkopf Eurex 60 Top50
Galvanised Height: 50 cm
146
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
[kg] Top scaffold bracket L painted Betonierkonsole L lackiert
Article n°
12.0 587153000
Painted blue Length: 101 cm Height: 159 cm
Universal railing shackle
3.0 580478000
Universal-Geländerbügel
[kg] Top50 adapter for Framax pouring platform U
18.5 588384000
Side handrail clamping unit T
29.1 580488000
Top50-Adapter für Framax-Betonierbühne U Galvanised Width: 75 cm Height: 134 cm
Seitenschutzgeländer T
Galvanised Length: 115 - 175 cm Height: 112 cm
Galvanised Height: 20 cm
Scaffold tube connection
Article n°
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000 Handrail post 1.50m
Galvanised
12.4 582754000
Geländer 1,50m
Galvanised
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Doka 4-part chain 3.20m Doka-Vierstrangkette 3,20m
Framax pouring platform U 1.25/2.70m
127.5 588377000
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
15.0 588620000 Follow the directions in the "Operating Instructions"!
147
Large-area formwork Top 50
Galvanised
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
[kg] Fix-De-Fix remote uncoupling system 3150kg
Article n°
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Spindle strut T7 75/110cm Spindle strut T7 100/150cm Spindle strut T7 150/200cm Spindle strut T7 200/250cm Spindle strut T7 250/300cm Spindle strut T7 305/355cm Spindelstrebe T7
[kg]
Article n°
13.2 16.8 21.6 26.2 29.4 35.0
584308000 584309000 584324000 584325000 584326000 584327000
Galvanised
Universal strut T5/5 .....mm
6.5 584311000
Strebe T5/5 .....mm
Painted blue Weight per linear metre
Spindle strut GS T5 65/101cm Spindelstrebe GS T5 65/101cm
9.1 584356000
Spindle strut T10 350/400cm Spindle strut T10 .....mm
57.5 584328000 16.9 584391000
Spindelstrebe T10
Galvanised
Spindle strut T6 73/110cm Spindle strut T6 100/150cm
10.2 584355000 12.5 584323000
Spindelstrebe T6
Galvanised
Spindle strut GS T6 95/140cm Spindelstrebe GS T6 95/140cm
Galvanised
10.3 584340000
Universal spindle foot T8
8.6 584314000
Universal-Spindelfuß T8
Painted blue Galvanised Height: 30 cm
Height adjuster for formwork beams
Höhenjustierung für Schalungsträger Galvanised Height: 46 cm
148
11.9 580218000
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
[kg] Height adjuster for multi-purpose walings Höhenjustierung für Mehrzweckriegel Galvanised Height: 45 cm
Article n°
10.3 580206000
[kg] Panel closure tool D125 SCC Sperrschieber D125 SCC
18.0 588127000
Galvanised Length: 18 cm Width: 33 cm Height: 27 cm
Assembly angle Top50
7.4 580082000
Montagelasche Top50
Adjusting spindle M36
Painted blue Length: 55 cm Width: 48 cm
6.2 500663002
Höhenjustierspindel M36
Article n°
Galvanised Length: 31 cm Height: 29.2 cm
8.1 580449000
Aufhängekopf WS10
Strip tensioner B 5.00m Galvanised
Galvanised Length: 21 cm Width: 18 cm Height: 23 cm
Universal support Top50 .....mm Tragwerklasche Top50 .....mm
11.1 584312000
Positioning rail .....m Painted blue Weight per linear metre
6.5 580390000
GF-Werkzeugbox included in scope of supply:
Hole gauge Top50
(A) Reversible ratchet 1/2"
0.73 580580000
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
2.9 580080000
Bohrplatte Top50
Painted blue Length: 17 cm Width: 15 cm Tool: Drill bit (diameter 10 mm)
Galvanised Length: 30 cm
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
1.8 580079000
Führungsschiene .....m
Painted blue Weight per linear metre
Tool box GF
3.5 580394000
Bandzwinge B 5,00m
Angle connector 9x5cm
0.22 580381000
Winkelverbinder 9x5cm
Galvanised
Rafter plate right Rafter plate left
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Galvanised Length: 17 cm
H20 screw-on bracket for formwork sheets Schalhaut-Schraubwinkel H20
0.19 586256000
Galvanised Height: 19.2 cm
Filler neck GF SCC
39.0 580217000
GF-Füllstutzen SCC
Galvanised Length: 66 cm
149
Large-area formwork Top 50
Suspension head WS10
Large-area formwork Top 50 | Timber-beam formwork | Doka Wall Systems
[kg] Double scraper Xlife 100/150mm 1.40m Doppelschaber Xlife 100/150mm 1,40m
Doka accessory box
Article n°
2.8 588674000
106.4 583010000
Doka-Kleinteilebox
Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
150
[kg]
Article n°
Large-area formwork Top 50
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 50
151
Wall formwork FF20 | Timber-beam formwork | Doka Wall Systems
Wall formwork FF20 The site-ready timber-beam formwork with a system-grid
The ready-assembled standard elements of the FF20 system are available in custom versions with any desired form-facing – for meeting widely differing fair-faced concrete specifications. Theatre in Gütersloh. Germany Contractors: Fechtelkord & Eggersmann
152
Doka Wall Systems | Timber-beam formwork | Wall formwork FF20
The advantages of a grid, with no frame imprint Thanks to its ready-assembled standard elements, Doka wall formwork FF20 combines the advantages of timber-beam formwork (no frame imprints) with the grid-related advantages of a framed formwork system.
Delivered to your site ready for use thanks to pre-assembled standard elements The principal advantages: • fast forming operations even where enhanced requirements are made regarding the concrete surface • practical height grid • integral stacking flanges • can be rented, which makes it economical for small numbers of repeat uses as well • available with any form facing
Simplifies planning and optimises utilisation of the equipment by its underlying 25 cm grid, with only a small number of different element widths Wall formwork FF20
The FF20 grid logic • simplifies planning, forming operations and logistics on the site • enables the maximum-possible utilisation of the formwork • lowers commissioning quantities and rental costs because of its easy adaptability
Rapid forming thanks to its practical inter-element connections Quick, safe vertical stacking or joining by means of Ladder system XS
• integrated, centring stacking flange • special FF20 formwork element connector for crane-handling-safe, tight and slippage-free gangs
Extremely high safety
Platform system Xsafe plus
thanks to safe workplace access routes Wall formwork FF20 can be • easily combined with Doka safety systems Permissible fresh-concrete pressure 50 kN/m²
25 cm grid
153
Wall formwork FF20 | Timber-beam formwork | Doka Wall Systems
System The FF20 elements
275
• The 25 cm grid, achieved with only four widths and three heights of element, simplifies planning, forming operations and logistics on the site
375
• Ingeniously co-ordinated panel formats for maximising utilisation of the formwork
100
• Accessories can be easily attached to the transverse walings across the entire width of the element – with no obligatory fixing points • Faced as standard with three-ply sheets; custom form-facing is possible whenever needed
50
75
100
200
650 cm (375 + 275)
550 cm (275 + 275)
Height grid
425 cm (275 + 100 + 50)
375 cm 325 cm (275 + 50)
275 cm
100 cm
154
FF20 standard elements can be used in conjunction with stacking elements to obtain practical formwork heights of up to 5.50 m. The 2.75 m high elements are symmetrical and can also be used placed on their sides.
Doka Wall Systems | Timber-beam formwork | Wall formwork FF20
Utilisation Vertical stacking / inter-element connections
The Formwork element connector FF20/50 Z makes light work of pulling the ready-assembled FF20 elements together tightly to make an absolutely cranehandling-safe, non-slip join.
The pre-assembled elements are linked together in a 25 cm grid, permitting optimum adaptation to the structure.
FF20 hinged corners provide professional solutions for acute and obtuse-angled corners.
Wall formwork FF20 is also ideal for wall pillars.
Wall formwork FF20
The Fastening bolt FF20, with a star grip nut, centres and connects the vertically stacked elements in a slippage-free manner. A turn-lock makes it easier to screw on the star grip nut.
Corners
Right-angled corners are also easy to form using the modular elements, even with different wall thicknesses of up to 60 cm.
FF20 can also be dimensioned for use in the horizontal – for casting floor-slabs and walls in a single pour, in fair-faced concrete quality.
155
Wall formwork FF20 | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
335.0 166.0 131.0 92.0 190.0 95.0 79.5 58.0 440.0 224.0 172.0 120.0 692.0 346.0 272.0 189.5
587512000 587508000 587504000 587500000 587523000 587522000 587521000 587520000 587564000 587562000 587561000 587560000 587563000 587565000 587566000 587567000
[kg]
Article n°
Dokaformwork Wall Wall Systems FF20
Formwork element FF20 2.00x2.75m 21mm Formwork element FF20 1.00x2.75m 21mm Formwork element FF20 0.75x2.75m 21mm Formwork element FF20 0.50x2.75m 21mm Formwork element FF20 2.00x1.00m 21mm Formwork element FF20 1.00x1.00m 21mm Formwork element FF20 0.75x1.00m 21mm Formwork element FF20 0.50x1.00m 21mm Formwork element FF20 2.00x3.75m 21mm Formwork element FF20 1.00x3.75m 21mm Formwork element FF20 0.75x3.75m 21mm Formwork element FF20 0.50x3.75m 21mm Formwork element FF20 2.00x6.50m 21mm Formwork element FF20 1.00x6.50m 21mm Formwork element FF20 0.75x6.50m 21mm Formwork element FF20 0.50x6.50m 21mm Fertigelement FF20 21mm
Inside corner FF20 2.75m 21mm Inside corner FF20 1.00m 21mm
214.0 587516000 117.0 587525000
Inside corner FF20 2.75m 27mm Inside corner FF20 1.00m 27mm Inside corner FF20 0.50m 27mm
220.0 587608000 120.0 587618000 33.5 587628000
Swivelling inside corner FF20 2.75m 21mm Swivelling inside corner FF20 1.00m 21mm Swivelling inside corner FF20 0.50m 21mm
246.5 587577000 103.0 587575000 53.7 587573000
Swivelling inside corner FF20 0.50m 27mm Swivelling inside corner FF20 1.00m 27mm Swivelling inside corner FF20 2.75m 27mm
55.0 587647000 108.8 587649000 255.0 587651000
Swivelling outside corner FF20 2.75m 21mm Swivelling outside corner FF20 1.00m 21mm
102.7 587579000 46.2 587578000
Innenecke FF20 21mm
Innenecke FF20 27mm
Formwork element FF20 2.00x2.75m 27mm Formwork element FF20 1.00x2.75m 27mm Formwork element FF20 0.75x2.75m 27mm Formwork element FF20 0.50x2.75m 27mm Formwork element FF20 2.00x1.00m 27mm Formwork element FF20 1.00x1.00m 27mm Formwork element FF20 0.75x1.00m 27mm Formwork element FF20 0.50x1.00m 27mm Fertigelement FF20 27mm
348.0 173.0 136.0 96.0 195.0 97.5 81.5 59.5
587606000 587604000 587602000 587600000 587616000 587614000 587612000 587610000
Gelenkinnenecke FF20 21mm
Gelenkinnenecke FF20 27mm
Stacking element FF20 2.00x0.50m 21mm Stacking element FF20 1.00x0.50m 21mm Stacking element FF20 0.75x0.50m 21mm Stacking element FF20 0.50x0.50m 21mm
90.5 45.4 36.4 27.5
587529000 587528000 587527000 587526000
Stacking element FF20 2.00x0.50m 27mm Stacking element FF20 1.00x0.50m 27mm Stacking element FF20 0.75x0.50m 27mm Stacking element FF20 0.50x0.50m 27mm
67.5 33.4 28.8 21.0
587626000 587624000 587622000 587620000
Aufstockelement FF20 21mm
Aufstockelement FF20 27mm
156
Gelenkaußenecke FF20 21mm
Painted blue
Doka Wall Systems | Timber-beam formwork | Wall formwork FF20
[kg] Swivelling outside corner FF20 2.75m 27mm Swivelling outside corner FF20 1.00m 27mm Gelenkaußenecke FF20 27mm
Article n°
102.7 587654000 46.2 587653000
[kg] Beam clamp Top50
Article n°
1.2 580081000
Trägerklammer Top50
Painted blue Height: 15 cm
Painted blue
Anchoring plate FF20/50
6.6 587531000
Ankerungslasche FF20/50
Painted blue Length: 55 cm
Swivelling outside corner FF20 0.50m Gelenkaußenecke FF20 0,50m
16.1 587652000
Painted blue
Splice plate with join adjustment
Verbindungslasche mit Fugenjustierung Painted blue Length: 76 cm
7.2 587571000
Ecklasche FF20 G
Painted blue Length: 49 cm Width: 24 cm
Distribution plate FF20
1.7 580216000
Verteilerplatte FF20
Fastening bolt FF20
Galvanised Width: 10.9 cm Height: 12 cm
0.30 587545000
Spannbolzen FF20
Galvanised Length: 17 cm Width-across: 30 mm
Star grip nut 15.0 G
Offset plate FF20 Painted blue Length: 35 cm Width: 18 cm Height: 4 cm
0.47 587544000
Sternmutter 15,0 G
Galvanised Width: 10 cm Height: 5 cm Width-across: 30 mm
Formwork element connector FF20/50 Elementverbinder FF20/50
6.3 587530000
Outside angle plate FF20 21mm Outside angle plate FF20 27mm Außenecklasche FF20
Elementverbinder FF20/50 Z
18.6 587535000 18.6 587634000
Painted blue Leg length: 60 cm
Painted blue Length: 55 cm
Formwork element connector FF20/50 Z
6.2 587534000
Versatzlasche FF20
6.0 587533000
Painted blue Length: 55 cm
Universal angle tie bracket
4.4 580604000
Universal-Winkelspanner
Painted blue Length: 20 cm
Adjustable waling extension FF20/50 Ausgleichslasche FF20/50
Painted blue Length: 87 cm
9.1 587532000
Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
157
Wall formwork FF20
Corner plate FF20 G
13.8 580215000
Wall formwork FF20 | Timber-beam formwork | Doka Wall Systems
[kg] Spring cotter 5mm
Article n°
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Flange clamp H20
1.0 580135000
Flanschklammer H20
Galvanised Width: 13 cm Width-across: 19 mm
[kg] Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
7.8 587547000
Aufstockwinkel FF20
Mehrzweckriegel WS10 Top50
Painted blue
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
Painted blue Height: 46 cm
Multi-purpose waling WS10 Top50 0.50m Multi-purpose waling WS10 Top50 0.75m Multi-purpose waling WS10 Top50 1.00m Multi-purpose waling WS10 Top50 1.25m Multi-purpose waling WS10 Top50 1.50m Multi-purpose waling WS10 Top50 1.75m Multi-purpose waling WS10 Top50 2.00m Multi-purpose waling WS10 Top50 2.25m Multi-purpose waling WS10 Top50 2.50m Multi-purpose waling WS10 Top50 2.75m Multi-purpose waling WS10 Top50 3.00m Multi-purpose waling WS10 Top50 3.50m Multi-purpose waling WS10 Top50 4.00m Multi-purpose waling WS10 Top50 4.50m Multi-purpose waling WS10 Top50 5.00m Multi-purpose waling WS10 Top50 5.50m Multi-purpose waling WS10 Top50 6.00m
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340 Stacking angle FF20
Article n°
Galvanised Delivery condition: folded closed
10.2 14.9 19.6 24.7 29.7 35.0 38.9 44.2 48.7 54.2 60.2 68.4 79.4 89.1 102.0 112.4 118.0
580001000 580002000 580003000 580004000 580005000 580006000 580007000 580008000 580009000 580010000 580011000 580012000 580013000 580014000 580015000 580016000 580017000
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
158
Doka Wall Systems | Timber-beam formwork | Wall formwork FF20
[kg]
Article n°
Eurex 60 550
[kg] Doka express anchor 16x125mm
Eurex 60 550 depending on length, comprising:
Doka-Expressanker 16x125mm
(A) Plumbing strut Eurex 60 550
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
(C) Coupler Eurex 60
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
Article n°
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
(D) Connector Eurex 60
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
(E) Plumbing strut shoe Eurex 60
Galvanised Length: 101 cm Height: 159 cm
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Top scaffold bracket L painted Delivery condition: separate parts
Betonierkonsole L lackiert
Painted blue Length: 101 cm Height: 159 cm
G
D
12.0 587153000
Universal bracket 60
14.0 580477000
Universal-Konsole 60
Galvanised Length: 86 cm Height: 181 cm G
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Galvanised Length: 121 cm Height: 235 cm
159
Wall formwork FF20
(G) Prop head
Wall formwork FF20 | Timber-beam formwork | Doka Wall Systems
[kg] Universal railing shackle
Article n°
3.0 580478000
Universal-Geländerbügel
[kg] Side handrail clamping unit T Seitenschutzgeländer T
Galvanised Height: 20 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Article n°
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
Galvanised
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Doka 4-part chain 3.20m
Galvanised Height: 7 cm
Screw-on coupler 48mm 50
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Framax pouring platform U 1.25/2.70m
127.5 588377000
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
Lifting chain 100cm 15kN
1.8 587548000
Anschlagkette 100cm 15kN
Length: 103 cm Follow the directions in the "Operating Instructions"!
Dokamatic lifting strap 13.00m Dokamatic-Umsetzgurt 13,00m
FF20 adapter for Framax pouring platform U
6.8 588381000
Top50 adapter for Framax pouring platform U
18.5 588384000
FF20-Adapter f. Framax-Betonierbühne U Galvanised Length: 34 cm
Top50-Adapter für Framax-Betonierbühne U Galvanised Width: 75 cm Height: 134 cm
160
10.5 586231000
Green Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Doka Wall Systems | Timber-beam formwork | Wall formwork FF20
[kg] Lifting bracket
Article n°
[kg]
Article n°
6.2 580460000
Kranöse
Galvanised Height: 59 cm
Height adjuster for multi-purpose walings
10.3 580206000
Straightening clamp FF20
22.8 587546000
Höhenjustierung für Mehrzweckriegel Galvanised Height: 45 cm
Richtzwinge FF20
Wall formwork FF20
Galvanised Width: 43 cm Height: 69 cm
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
161
Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
Large-area formwork Top 100 tec The super-strong timber-beam formwork for maximum cost-efficiency
Top 100 tec represents a wholly new generation of timberbeam formwork. Developed completely from scratch, the heavy-duty I tec 20 beam makes it possible to dispense with an entire waling level. This reduces the number of form-tie points, and thus wage-costs.
162
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec
The fair-faced concrete formwork for any requirement Based on the novel, heavy-duty Beam I tec 20, the new Large-area formwork Top 100 tec system is the ideal solution for situations requiring absolute dimensional accuracy, despite high concrete pressures and widely spaced form-ties. The shape, size, tie-hole pattern and form-facing of the elements can now be adapted better than ever to suit any requirement.
The super-strong timber-beam formwork with the novel heavy-duty Beam I tec 20 Large-area formwork Top 100 tec is ideal for • high concrete pressures • widely spaced form-ties • minimal deflection Large-area formwork Top 100 tec
• new concrete formulations
Rapid forming made possible by optimum adaptability to shape, size and concrete pressure Outstandingly good forming-times, thanks to • perfect adaptability to all requirements (shape, size, concrete pressure) • exceptionally low number of form-ties • simple inter-element connections
Platform system Xsafe plus
• large-area shifting units • fast assembly, either on-site or – for even greater convenience – by the Doka Ready-to-Use Service
Ideal for fair-faced concrete
Ladder system XS
because it is dimensionally stable and can use any type of form-facing Large-area formwork Top 100 tec ensures a clean concrete finish, thanks to features like • the stable Beam I tec 20, for minimal deflection • form-facing is screwed on from the rear, leaving no screw-head imprints
Beam I tec 20
• continuous adaptability to the desired form-tie pattern • any type of form-facing can be used • professional pre-assembly by the Doka Ready-to-Use Service
Extremely high safety
Execution of (shell) construction work
as it is easy to combine with Doka safety systems Safe working conditions are ensured by • ready-to-use platform systems • integrable ladderways • optimised element struts
Can be dimensioned for any fresh-concrete pressure and any shape
163
Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
16.0 23.5 31.0 38.5 46.5 54.0 61.5 69.0 77.0 84.5 92.0 107.0 122.5 137.5 153.0
586901000 586902000 586903000 586904000 586905000 586906000 586907000 586908000 586909000 586910000 586911000 586912000 586913000 586914000 586915000
[kg]
Article n°
Doka Wall Systems Large-area formwork Top 100 tec
Top100 tec waling WU14 0.50m Top100 tec waling WU14 0.75m Top100 tec waling WU14 1.00m Top100 tec waling WU14 1.25m Top100 tec waling WU14 1.50m Top100 tec waling WU14 1.75m Top100 tec waling WU14 2.00m Top100 tec waling WU14 2.25m Top100 tec waling WU14 2.50m Top100 tec waling WU14 2.75m Top100 tec waling WU14 3.00m Top100 tec waling WU14 3.50m Top100 tec waling WU14 4.00m Top100 tec waling WU14 4.50m Top100 tec waling WU14 5.00m Top100 tec-Riegel WU14
Waling clamp H20
0.22 580114000
Riegelklammer H20
Galvanised Width: 8 cm Width-across: 13 mm
Beam screw S 8/60
0.06 580116000
Riegelverschraubung S 8/60 Galvanised Length: 7 cm Width-across: 13 mm
Beam screw H 8/70
0.06 580117000
Riegelverschraubung H 8/70 Galvanised Length: 8 cm Width-across: 13 mm
Fastening plate
2.7 580110000
Anschraublasche
Top100 tec inside corner waling
21.0 586918000
Top100 tec corner profile 1.15m Top100 tec corner profile 2.90m
7.5 586921000 19.0 586920000
Top100 tec-Inneneckriegel
Top100 tec-Eckprofil
Painted blue Width: 13 cm Height: 15 cm
Lifting bracket
6.2 580460000
Kranöse
Galvanised Height: 59 cm
Top100 tec formwork element connector Top100 tec-Elementverbinder
14.1 586923000
Length: 125 cm
Top100 tec adjustable waling extension Top100 tec-Ausgleichslasche
25.9 586924000
Length: 137 cm
Flange clamp G
1.1 580120000
Flanschklammer G
Beam clamp Top50
Galvanised Width: 13 cm Width-across: 19 mm
Flange claw Galvanised Width: 17 cm Width-across: 19 mm
164
Painted blue Height: 15 cm
1.0 580137000
Flanschkralle
1.2 580081000
Trägerklammer Top50
Top100 tec anchoring plate
6.8 586925000
Top100 tec-Ankerungslasche
Length: 56 cm
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec
[kg] Top100 tec internal angle plate Top100 tec-Innenecklasche
Article n°
22.2 586926000
Length: 70 cm Width: 55 cm
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Top100 tec transition plate 21mm Top100 tec-Übergangslasche 21mm
16.0 586927000
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
Top100 tec-Winkelspanner WU14
Connecting pin 10cm
7.5 586928000
0.34 580201000
Verbindungsbolzen 10cm
0.58 580202000
Verbindungsbolzen 25cm
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of:
Galvanised Length: 14 cm
Connecting pin 25cm
Panel strut 540
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Galvanised Length: 25 cm
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
10.2 588251000
Length: 171 - 224 cm
Galvanised Length: 13 cm
Stacking plate H20
(D) Adjusting strut 220
Galvanised Delivery condition: folded closed
8.3 580310000
Aufstocklasche H20
Galvanised Length: 68.8 cm
T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Grey
165
Large-area formwork Top 100 tec
Top100 tec angle tie bracket WU14
Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
[kg]
Article n°
Eurex 60 550
[kg] Doka express anchor 16x125mm
Eurex 60 550 depending on length, comprising:
Doka-Expressanker 16x125mm
(A) Plumbing strut Eurex 60 550
21.3 582651000
Powder-coated, blue Aluminium Length: 250 cm
(C) Coupler Eurex 60
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
Article n°
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
(D) Connector Eurex 60
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
Universal bracket 60
14.0 580477000
Universal-Konsole 60
(E) Plumbing strut shoe Eurex 60
Galvanised Length: 86 cm Height: 181 cm
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm Delivery condition: separate parts G
D
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
Top scaffold bracket L
G
12.6 587153500
Betonierkonsole L
Galvanised Length: 101 cm Height: 159 cm
Prop head Eurex 60 Top50
7.1 582665000
Stützenkopf Eurex 60 Top50
Galvanised Height: 50 cm
Top scaffold bracket L painted Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
166
Betonierkonsole L lackiert
Painted blue Length: 101 cm Height: 159 cm
12.0 587153000
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec
[kg] Universal railing shackle
Article n°
3.0 580478000
Universal-Geländerbügel
[kg] Side handrail clamping unit T Seitenschutzgeländer T
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
Galvanised Height: 20 cm
Scaffold tube connection
Article n°
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Fix-De-Fix remote uncoupling system 3150kg
Galvanised
Screw-on coupler 48mm 50
Follow the directions in the "Operating Instructions"!
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Spindle strut GS T5 65/101cm Framax pouring platform U 1.25/2.70m
127.5 588377000
Spindelstrebe GS T5 65/101cm
Galvanised
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
Spindle strut T6 73/110cm Spindle strut T6 100/150cm
10.2 584355000 12.5 584323000
Spindelstrebe T6
Top50 adapter for Framax pouring platform U Top50-Adapter für Framax-Betonierbühne U Galvanised Width: 75 cm Height: 134 cm
18.5 588384000
9.1 584356000
Galvanised
167
Large-area formwork Top 100 tec
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Spindle strut GS T6 95/140cm Spindelstrebe GS T6 95/140cm
Article n°
10.3 584340000
Height adjuster for formwork beams
13.2 16.8 21.6 26.2 29.4 35.0
Tool box GF
Galvanised
Spindle strut T7 75/110cm Spindle strut T7 100/150cm Spindle strut T7 150/200cm Spindle strut T7 200/250cm Spindle strut T7 250/300cm Spindle strut T7 305/355cm Spindelstrebe T7
584308000 584309000 584324000 584325000 584326000 584327000
Höhenjustierung für Schalungsträger Galvanised Height: 46 cm
Article n°
11.9 580218000
6.5 580390000
GF-Werkzeugbox included in scope of supply:
(A) Reversible ratchet 1/2"
0.73 580580000
Galvanised Length: 30 cm
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Galvanised
Spindle strut T10 350/400cm Spindle strut T10 .....mm
[kg]
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
57.5 584328000 16.9 584391000
Spindelstrebe T10
Filler neck GF SCC
39.0 580217000
GF-Füllstutzen SCC
Galvanised Length: 66 cm
Panel closure tool D125 SCC Sperrschieber D125 SCC
18.0 588127000
Galvanised Length: 18 cm Width: 33 cm Height: 27 cm
Top100 tec assembly angle
7.4 586929000
Strip tensioner B 5.00m
3.5 580394000
Top100 tec-Montagelasche
Universal spindle foot T8
8.6 584314000
Universal-Spindelfuß T8
Painted blue Galvanised Height: 30 cm
Bandzwinge B 5,00m
Galvanised
168
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec
[kg] Positioning rail .....m
Article n°
1.8 580079000
Führungsschiene .....m
[kg] Bolt-on castor set B
Top100 tec hole gauge
Painted blue
2.9 586930000
Top100 tec-Bohrplatte
Angle connector 9x5cm
0.22 580381000
Winkelverbinder 9x5cm
33.6 586168000
Anklemm-Radsatz B
Painted blue Weight per linear metre
Article n°
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Rafter plate right Rafter plate left
Large-area formwork Top 100 tec
Galvanised
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Galvanised Length: 17 cm
H20 screw-on bracket for formwork sheets Schalhaut-Schraubwinkel H20
0.19 586256000
Galvanised Height: 19.2 cm
Double scraper Xlife 100/150mm 1.40m Doppelschaber Xlife 100/150mm 1,40m
Doka accessory box Doka-Kleinteilebox
2.8 588674000
106.4 583010000 Timber parts varnished yellow Steel parts galvanised Length: 154 cm Width: 83 cm Height: 77 cm Follow the directions in the "Operating Instructions"!
169
Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
Wall formwork FF100 tec The site-ready timber-beam formwork for high-specification concrete finishes
The new Wall formwork FF100 tec comprises only a very few different elements and is supplied pre-assembled ready for immediate use. Thanks to the use of high-load system components, it manages with even fewer form-ties. The formtie pattern is located well inside each element. This, and the way that the form-facing is screwed-on from the rear with the aid of screw-on brackets, produces an aesthetically appealing, high-grade concrete surface.
170
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec
The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF100 tec combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. They owe their extremely high load-bearing capacity to the new, heavy-duty Beam I tec 20 and the FF100 tec waling WU14.
No limits on the pouring rate up to a pour-height of 3.60 m, with only two 20.0 form-tie points Also withstands the hydrostatic pressure of new types of concrete, thanks to • the minimised deflection achieved by the stable I tec 20 beam • high rigidity as the formwork beams are fastened to the walings by welded-on plates
Optimises equipment utilisation and site logistics by its underlying 25 cm grid, with only a small number of different element widths
Wall formwork FF100 tec
Cuts the commissioning quantities and rental duration, thanks to • simplified planning based on a logical element size-grid • rapid availability with no lead-times for pre-assembly • maximised utilisation of the commissioning quantity
The fair-faced concrete formwork made of ready-assembled standard elements Provides superb concrete appearance • as the form-ties are located well inside the element, in a symmetrical pattern • no screw imprints in the concrete, as the form-facing is screwed on from the rear
Ladder system XS
• as the pre-assembled beam grilles can be faced with any type of form-facing • is suitable for fair-faced concrete of Classes SB 1 to SB 4 (as defined in German Code of Practice for Fair-Faced Concrete)
Rapid forming with the utmost workplace safety
Platform system Xsafe plus
thanks to the system’s ease of handling and optimised accessories Shortens the forming-times, with its • improved formwork element connectors with optimised pull-tight and push-apart function for tighter joins and troublefree fitting of sealing tapes
Beam I tec 20
• up to 25 cm wide closures in a 5 cm grid with no need for an adjustable waling extension • up to 20 cm wide infill zones with no need for extra form-ties • ready-to-use platform systems with integrable ladderways • optimised element struts Permissible fresh-concrete pressure 90 kN/m²
171
Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
FF100 tec grille 2.50x6.00m FF100 tec grille 1.25x6.00m FF100 tec grille 1.00x6.00m FF100 tec grille 0.75x6.00m FF100 tec grille 2.50x4.25m FF100 tec grille 1.25x4.25m FF100 tec grille 1.00x4.25m FF100 tec grille 0.75x4.25m FF100 tec grille 2.50x3.00m FF100 tec grille 1.25x3.00m FF100 tec grille 1.00x3.00m FF100 tec grille 0.75x3.00m FF100 tec grille 2.50x1.25m FF100 tec grille 1.25x1.25m FF100 tec grille 1.00x1.25m FF100 tec grille 0.75x1.25m FF100 tec grille 2.50x0.60m FF100 tec grille 1.25x0.60m FF100 tec grille 1.00x0.60m FF100 tec grille 0.75x0.60m
895.0 527.0 382.0 343.0 689.0 408.0 295.0 245.0 515.0 310.0 225.0 200.0 310.0 196.0 143.0 126.0 117.0 60.0 45.0 38.0
586837000 586838000 586839000 586840000 586833000 586834000 586835000 586836000 586825000 586826000 586827000 586828000 586829000 586830000 586831000 586832000 586841000 586842000 586843000 586844000
FF100 tec inside corner grille 3.00m FF100 tec inside corner grille 1.25m
172.0 586845000 101.0 586846000
Dokaformwork Wall Wall Systems FF100 tec
FF100 tec element 2.50x6.00m 21mm FF100 tec element 1.25x6.00m 21mm FF100 tec element 1.00x6.00m 21mm FF100 tec element 0.75x6.00m 21mm FF100 tec element 2.50x4.25m 21mm FF100 tec element 1.25x4.25m 21mm FF100 tec element 1.00x4.25m 21mm FF100 tec element 0.75x4.25m 21mm FF100 tec element 2.50x3.00m 21mm FF100 tec element 1.25x3.00m 21mm FF100 tec element 1.00x3.00m 21mm FF100 tec element 0.75x3.00m 21mm FF100 tec element 2.50x1.25m 21mm FF100 tec element 1.25x1.25m 21mm FF100 tec element 1.00x1.25m 21mm FF100 tec element 0.75x1.25m 21mm FF100 tec element 2.50x0.60m 21mm FF100 tec element 1.25x0.60m 21mm FF100 tec element 1.00x0.60m 21mm FF100 tec element 0.75x0.60m 21mm FF100 tec-Element
FF100 tec inside corner 3.00m 21mm FF100 tec inside corner 1.25m 21mm FF100 tec-Innenecke
1111.0 634.0 467.0 405.0 843.0 483.0 355.0 309.0 622.0 363.0 267.0 232.0 355.0 218.0 160.0 138.0 140.0 70.0 53.0 44.0
586813000 586814000 586815000 586816000 586809000 586810000 586811000 586812000 586801000 586802000 586803000 586804000 586805000 586806000 586807000 586808000 586817000 586818000 586819000 586820000
215.0 586821000 120.0 586822000
FF100 tec-Trägerrost
FF100 tec-Inneneckrost
Width: 52 cm
Width: 55 cm
FF100 tec outside corner 3.00m 21mm FF100 tec outside corner 1.25m 21mm FF100 tec-Aussenecke
Width: 110 cm
172
359.0 586823000 200.0 586824000
FF100 tec outside corner grille 3.00m FF100 tec outside corner grille 1.25m FF100 tec-Ausseneckrost
Width: 110 cm
316.0 586847000 180.0 586848000
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec
[kg] Filler neck GF SCC
Article n°
39.0 580217000
GF-Füllstutzen SCC
Galvanised Length: 66 cm
Panel closure tool D125 SCC Sperrschieber D125 SCC
18.0 588127000
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Galvanised Length: 18 cm Width: 33 cm Height: 27 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
Fastening bolt FF20
0.30 587545000
Spannbolzen FF20
Galvanised Length: 17 cm Width-across: 30 mm
Star grip nut 15.0 G
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
0.47 587544000
Sternmutter 15,0 G
Beam clamp Top50
1.2 580081000
Trägerklammer Top50
Painted blue Height: 15 cm
Connecting pin 10cm Galvanised Length: 14 cm
Spring cotter 5mm
(A) Prop head
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
0.05 580204000
Federvorstecker 5mm
49.0 588249000
Elementstütze 540 consisting of:
0.34 580201000
Verbindungsbolzen 10cm
Panel strut 540
Galvanised Length: 13 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.2 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
Stacking angle FF20
7.8 587547000
Aufstockwinkel FF20
Painted blue Height: 46 cm
H20 screw-on bracket for formwork sheets Schalhaut-Schraubwinkel H20
0.19 586256000
Galvanised Height: 19.2 cm
173
Wall formwork FF100 tec
Galvanised Width: 10 cm Height: 5 cm Width-across: 30 mm
Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
[kg]
Article n°
Eurex 60 550
[kg] Doka coil 16mm
Eurex 60 550 depending on length, comprising:
0.009 588633000
Doka-Coil 16mm
(A) Plumbing strut Eurex 60 550
Article n°
Galvanised Diameter: 1.6 cm
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
21.3 582651000
Powder-coated, blue Aluminium Length: 250 cm
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
(C) Coupler Eurex 60
Galvanised Length: 101 cm Height: 159 cm
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
Top scaffold bracket L painted Betonierkonsole L lackiert
(F) Adjusting strut 540 Eurex 60
12.0 587153000
Painted blue Length: 101 cm Height: 159 cm
29.0 582659000
Galvanised Length: 302 - 543 cm Delivery condition: separate parts G
D
Universal bracket 60
14.0 580477000
Universal-Konsole 60
Galvanised Length: 86 cm Height: 181 cm
G
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
174
0.31 588631000 Universal railing shackle
3.0 580478000
Universal-Geländerbügel
Galvanised Height: 20 cm
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
[kg]
Article n°
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
[kg] Side handrail clamping unit T Seitenschutzgeländer T
Article n°
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
Galvanised
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
0.84 682002000
Anschraubkupplung 48mm 50
Doka 4-part chain 3.20m
Galvanised Width-across: 22 mm
Framax pouring platform U 1.25/2.70m
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
127.5 588377000
Framax-Betonierbühne U 1,25/2,70m Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
Lifting chain 100cm 15kN
1.8 587548000
Anschlagkette 100cm 15kN
Length: 103 cm Follow the directions in the "Operating Instructions"!
FF20 adapter for Framax pouring platform U FF20-Adapter f. Framax-Betonierbühne U Galvanised Length: 34 cm
6.8 588381000 Dokamatic lifting strap 13.00m Dokamatic-Umsetzgurt 13,00m
Top50 adapter for Framax pouring platform U Top50-Adapter für Framax-Betonierbühne U Galvanised Width: 75 cm Height: 134 cm
18.5 588384000
10.5 586231000
Green Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
175
Wall formwork FF100 tec
Screw-on coupler 48mm 50
Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Lifting bracket
6.2 580460000
Kranöse
Galvanised Height: 59 cm
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
176
Article n°
[kg]
Article n°
Wall formwork FF100 tec
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec
177
Circular formwork H20 | Timber-beam formwork | Doka Wall Systems
Circular formwork H20 The practical circular formwork for exact curves
Circular formwork H20 is used for forming exactly circular walls, as required in e.g. sewage treatment plants, for spiral ramps in car-parks and in circular tanks. All the elements are supplied to the site completely assembled, and are ready for operation as soon as the curvature has been set with the adjusting spindles. Csepel sewage treatment plant near Budapest, Hungary
178
Doka Wall Systems | Timber-beam formwork | Circular formwork H20
The easy way to form perfect curves Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of 3.50 m upward – steplessly.
Highly cost-efficient right from the very first time of use The system reduces the rental and wage costs at your site by • only needing a small number of form-ties – just one form-tie per 1.5 m² • low on-site formwork quantities, as it adapts effortlessly to any layout • the pre-assembled elements are quickly readied for use by setting the desired radius with the adjusting spindles
Radii can be continuously adjusted simply by turning spindles Circular formwork H20 stands out for great flexibility, thanks to its Circular formwork H20
• practical height grid • exact curves from a radius of 3.50 m upward • flexible, heavy-duty Dokaplex 21 mm form-ply
Rapid working and ease of handling Efficient construction workflow, as • there is only one connecting device (Adjustable clamp 10cm) • the system can easily be combined with Framax, Alu-Framax and Column formwork RS • setting the radii is easy – simply by turning spindles • radii are easy to check, using flexible templates
The practical height grid and the systematic spacing of the form-ties make it possible to form widely differing height-combinations quickly and easily.
Ladder system XS
Permissible fresh-concrete pressure 60 kN/m²
179
Circular formwork H20 | Timber-beam formwork | Doka Wall Systems
System Continuously adjustable The circular formwork elements are easy to adjust – steplessly – with reference to a flexible template.
Easy to combine A special end-profile makes it easy to connect the system to other Doka formwork systems such as Framed formwork Framax Xlife or Column formwork RS.
Optimum element size-grid • Only two widths of panel (inside element 2.40 m, outside element 2.50 m) for all radii down to 3.50 m
70
120
240
300
360
• Practical height grid with 5 different heights of panel
240
180
240
240
240
240
Doka Wall Systems | Timber-beam formwork | Circular formwork H20
Utilisation Radii down to 3.50 m The site-ready, pre-assembled elements (one each for the inside and outside formwork) can be continuously adjusted with reference to a flexible template, to set radii of down to 3.50 m.
Radii down to 2.50 m
Easy to adapt Circular formwork H20 easy to adapt to different radii, simply by turning the spindles – for a smooth construction workflow.
181
Circular formwork H20
Even very tight radii of between 3.50 m and 2.50 m are possible, and must be planned separately.
Circular formwork H20 | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
195.0 244.0 472.0 523.0 699.0
587820000 587821000 587822000 587813000 587823000
[kg]
Article n°
Doka Wall Circular formwork Systems H20
Circular formwork element H20 2.40x0.70m Circular formwork element H20 2.40x1.20m Circular formwork element H20 2.40x2.40m Circular formwork element H20 2.40x3.00m Circular formwork element H20 2.40x3.60m Rundschalungselement H20 2,40m
Panel strut 340 without prop head
24.0 580365000
(A) Plumbing strut 340
14.2 588247000
Elementstütze 340 ohne Stützenkopf consisting of: Galvanised Length: 190 - 341 cm
(B) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
A
B C
Circular formwork element H20 2.50x0.70m Circular formwork element H20 2.50x1.20m Circular formwork element H20 2.50x2.40m Circular formwork element H20 2.50x3.00m Circular formwork element H20 2.50x3.60m Rundschalungselement H20 2,50m
Stacking plate for circular formwork H20 Aufstocklasche für Rundschalung H20 Galvanised Height: 62 cm
197.0 249.0 480.0 534.0 716.0
587825000 587826000 587827000 587814000 587828000
Panel strut 540 without prop head
42.2 580366000
(A) Plumbing strut 540
29.6 588250000
Elementstütze 540 ohne Stützenkopf consisting of: Galvanised Length: 309 - 550 cm
7.0 587830000
(B) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
Adjustable clamp 10cm
3.7 587808000
Ausgleichsspanner 10cm
A
Galvanised Length: 30 cm
Wrench for circular formwork H20 Schlüssel für Rundschalung H20
0.70 587807000
B
Galvanised Length: 27 cm C
Template f. circular formw. H20 ...../.....mm Schablone für Rundschalung H20 ...../.....mm Weight per m2 Project-specific!
182
6.5 177020000
Doka Wall Systems | Timber-beam formwork | Circular formwork H20
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
[kg]
Article n°
Eurex 60 550
Eurex 60 550 depending on length, comprising:
(A) Plumbing strut Eurex 60 550
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Coupler Eurex 60
(C) Plumbing strut 340
14.2 588247000
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm
(G) Fixing unit RD
1.9 587806000
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of:
(H) Bolt for prop head D25 110 (I) Linch pin 6x40 galv. DIN 11023
0.45 508244050 0.03 020401
Delivery condition: separate parts
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Fixing unit RD
1.9 587806000
Befestigungseinheit RD Galvanised Length: 19 cm Width: 8 cm
183
Circular formwork H20
Galvanised Length: 19 cm Width: 8 cm
Circular formwork H20 | Timber-beam formwork | Doka Wall Systems
[kg] Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Article n°
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
Article n°
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Galvanised Diameter: 1.6 cm
Universal bracket 90
[kg]
30.4 580476000
Universal-Konsole 90
Scaffold tube connection
Galvanised Length: 121 cm Height: 235 cm
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
Doka 4-part chain 3.20m
Follow the directions in the "Operating Instructions"!
Galvanised Length: 101 cm Height: 159 cm
Top scaffold bracket L painted Betonierkonsole L lackiert
15.0 588620000
Doka-Vierstrangkette 3,20m
12.0 587153000
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Framax fitting timber 2x12cm 2.70m Framax fitting timber 3x12cm 2.70m Framax fitting timber 5x12cm 2.70m Framax fitting timber 10x12cm 2.70m
3.1 4.7 7.8 15.5
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Painted blue Length: 101 cm Height: 159 cm
Framax-Passholz 2,70m
Varnished yellow
184
176020000 176022000 176024000 176026000
Doka Wall Systems | Timber-beam formwork | Circular formwork H20
[kg] Reversible ratchet 1/2"
Article n°
[kg]
Article n°
0.73 580580000
Umschaltknarre 1/2"
Galvanised Length: 30 cm
Box nut 24 1/2" Stecknuss 24 1/2"
0.12 580584000
Doka Safety Systems
Circular formwork H20
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
185
Facade formwork Top 50 | Timber-beam formwork | Doka Wall Systems
Facade formwork Top 50 The high-speed formwork for hybrid constructions
Facade formwork Top 50 is used for advance casting of the slab-edges together with the in-situ columns and pre-cast parapets. This greatly simplifies and speeds up subsequent forming of the floor-slabs. HQ building of Salzburg Regional Health Insurance Fund Contractors: “ARGE Gebietskrankenkasse Salzburg” consortium
186
Doka Wall Systems | Timber-beam formwork | Facade formwork Top 50
Safe, economical forming of pre-cast facades Facade formwork Top 50 speeds up work on pre-cast facades, both with integrated and set-back CIP columns.
Fast construction progress using only small quantities of equipment Facade formwork Top 50 • speeds up work, especially where there are integrated CIP columns • utilises the pre-cast members as stop-ends • mostly consists of standard Large-area formwork Top 50 components
Very high safety Facade formwork Top 50
thanks to integrable fall protection using scaffold tubes or netting Safe construction workflow, as • work can be carried out from the safety of the floor-slab
Highly economical as no extra working and protection platforms are needed Delivered to your site ready for use • following professional pre-assembly by the Doka Ready-toUse Service
Saves on working and protection platforms
Pre-assembled ready for use
187
Facade formwork Top 50 | Timber-beam formwork | Doka Wall Systems
System There is no longer any need to make stop-ends around the edge of the slab. This brings huge savings in both time and costs.
Facade formwork Top 50 utilises the pre-cast members as stop-ends and does away with the need for working-platform railings and guard rails because fall-arrest barriers can be integrated using scaffold tubes.
188
Doka Wall Systems | Timber-beam formwork | Facade formwork Top 50
Facade formwork Top 50
Utilisation
Fast construction progress, no extra working and protection platforms and outstanding cost-efficiency are the defining features of Facade formwork Top 50.
Both with integrated CIP columns ...
... and with set-back CIP columns, Facade formwork Top 50 is the most economical solution on construction projects involving pre-cast facades.
189
Facade formwork Top 50 | Timber-beam formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Wall Façade formwork Systems Top 50
Facade waling WS10 2.50m Facade waling WU14 6.00m
50.0 580692000 189.2 580691000
Fassadenriegel
Multi-purpose waling WU12 Top50 1.50m
37.5 580020000
Steel waling WS10 Top50 0.50m Steel waling WS10 Top50 0.75m Steel waling WS10 Top50 1.00m Steel waling WS10 Top50 1.25m
10.4 15.4 20.2 25.0
Mehrzweckriegel WU12 Top50 1,50m Painted blue
Painted blue
Facade precast member clamp H Fassaden-Fertigteilklemme H
26.2 580693000
Galvanised Length: 70 cm Height: 41 cm Width-across: 50 mm
Facade precast member clamp V Fassaden-Fertigteilklemme V
Stahlwandriegel WS10 Top50
Painted blue
8.1 580694000
Fassaden-Fertigteilklemme O
Steel waling WU12 Top50 1.50m
Stahlwandriegel WU12 Top50 1,50m Painted blue
Galvanised Length: 70 cm Height: 41 cm Width-across: 50 mm
Facade precast member clamp O
580038000 580039000 580040000 580041000
37.9 580087000
4.9 580698000
Galvanised Length: 59 cm Height: 22 cm
Flange clamp H20
1.0 580135000
Flanschklammer H20
Galvanised Width: 13 cm Width-across: 19 mm
Facade waling connector
4.7 580695000
Fassaden-Riegelverbinder
Galvanised Length: 26 cm Height: 25 cm
Protective cap H20
0.36 587248000
Stirnschuh H20
Galvanised Length: 20 cm Width: 7 cm
Facade anchor socket 15.0
3.5 580696000
Fassaden-Ankermuffe 15,0
Galvanised Length: 33 cm Width: 12 cm
Eye-lug anchor 15.0 without tie rod Ösenanker 15,0 ohne Ankerstab
Lifting bracket
6.2 580460000
Kranöse
Galvanised Height: 59 cm
1.2 580649000
Galvanised Length: 11 cm
Multi-purpose waling WS10 Top50 0.50m Multi-purpose waling WS10 Top50 0.75m Multi-purpose waling WS10 Top50 1.00m Multi-purpose waling WS10 Top50 1.25m Multi-purpose waling WS10 Top50 2.50m Mehrzweckriegel WS10 Top50
Painted blue
190
10.2 14.9 19.6 24.7 48.7
580001000 580002000 580003000 580004000 580009000
Corner connecting plate 90/50 Winkellasche 90/50
Painted blue Length: 51 cm Width: 40 cm
13.8 580603000
Doka Wall Systems | Timber-beam formwork | Facade formwork Top 50
[kg] Universal angle tie bracket
Article n°
4.4 580604000
Universal-Winkelspanner
Painted blue Length: 20 cm
[kg]
Article n°
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
(D) Adjusting strut 220
Galvanised Delivery condition: folded closed
Galvanised Length: 13 cm
Facade waling holder
10.6 588251000
Length: 171 - 224 cm
2.3 580674000
Fassaden-Riegelhalter
Facade strut holder
2.0 580675000
Fassaden-Stützenhalter Galvanised Length: 30 cm
Plumbing strut 340 for precast members Justierstütze 340 für Fertigteile
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of:
18.2 588296000
Galvanised Length: 190 - 341 cm
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
Plumbing strut 540 for precast members 14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
Justierstütze 540 für Fertigteile
33.3 588297000
Galvanised Length: 309 - 550 cm
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
191
Facade formwork Top 50
Galvanised Length: 31 cm
Facade formwork Top 50 | Timber-beam formwork | Doka Wall Systems
[kg] Plumbing strut 340 with prop head Justierstütze 340 mit Stützenkopf
Article n°
28.0 580671000
[kg] Top scaffold bracket L painted Betonierkonsole L lackiert
Galvanised Length: 190 - 341 cm
Plumbing strut 540 with prop head Justierstütze 540 mit Stützenkopf
Article n°
12.0 587153000
Painted blue Length: 101 cm Height: 159 cm
35.2 580673000 Universal bracket 60
Galvanised Length: 309 - 550 cm
14.0 580477000
Universal-Konsole 60
Galvanised Length: 86 cm Height: 181 cm
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
Universal railing shackle Galvanised Height: 20 cm
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
Galvanised Length: 101 cm Height: 159 cm
192
3.0 580478000
Universal-Geländerbügel
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Galvanised
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Doka Wall Systems | Timber-beam formwork | Facade formwork Top 50
[kg] Scaffold tube connection
Article n°
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
[kg] Tool box GF
Article n°
6.5 580390000
GF-Werkzeugbox included in scope of supply:
(A) Reversible ratchet 1/2"
0.73 580580000
Galvanised Length: 30 cm
Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
0.84 682002000 0.71 586013000
Anschraubkupplung
Galvanised Width-across: 22 mm
Swivel coupler 48mm
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
Reversible ratchet 3/4"
1.5 580894000
Umschaltknarre 3/4"
Galvanised Length: 50 cm
Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Box nut 50 3/4" Stecknuss 50 3/4"
0.81 581449000
Doka Safety Systems Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
193
Facade formwork Top 50
Normal coupler 48mm
Column formwork Column formwork KS Xlife | Column formwork | Doka Wall Systems
Column formwork KS Xlife The high-speed column formwork with a folding mechanism
Wherever large numbers of rectangular columns need to be cast at speed, Column formwork KS Xlife is the best choice. The folding mechanism makes for super-short forming times. By attaching shifting-wheels, Column formwork KS Xlife can also be hand-shifted with no need for crane assistance. Football stadium in Györ, Hungary Contractors: Strabag
194
Doka Wall Systems | Column formwork | Column formwork KS Xlife
The quick and easy way to form quadratic and rectangular columns Wherever large numbers of columns, with varying cross-sections, need to be formed on time and on budget.
Rapid forming thanks to folding mechanism Gives your site a speed-boost • as the formwork is simply folded open and shut, minimising set-up and removal times • as there is no need to change the form-facing when adjusting the cross-section anywhere between 20 and 60 cm, in 5 cm increments
Reduced close-out costs thanks to the high-grade Xlife sheet
Column formwork KS Xlife
The plastic-coated Xlife sheet delivers • very high repeat-use numbers and fewer changes of form-facing • fewer places needing touching-up, thanks to special surface structure • very easy cleaning and nailability
Easy to reposition using the shifting-wheels You can reposition the Column formwork KS Xlife • by hand, i.e. without crane assistance, up to a max. formwork height of 3.60 m • in one crane cycle, thus saving crane time, for heights above 3.60 m No form-tie and frame imprints
Enhanced safety throughout the entire operation Superlative safety conditions on your site, thanks to • safe vertical access with the Ladder system XS
Ladder system XS
• safe working with the Doka column formwork platform 150/90 cm • the Platform planking KS
Xlife sheet
Permissible fresh-concrete pressure 90 kN/m²
195
Column formwork KS Xlife | Column formwork | Doka Wall Systems
System Quick to plumb and align The positioning aid makes it possible to plumb and align the formwork easily and quickly using a nail-puller.
Clean edges The frontal triangular ledge is easy to slot into place and ensures tight, clean corners.
Long-lived Xlife sheet • Extremely high numbers of re-use cycles with superlative concreting results, for unparalleled cost efficiency and fewer changes of form-facing • No burst-off plywood chips, and less water absorbed through nail-holes, for longer service life • Special surface structure for less touching-up and reduced close-out costs • Timber-plastic composite sheet that can also be cleaned using a high-pressure washer
196
Doka Wall Systems | Column formwork | Column formwork KS Xlife
Utilisation Craneless repositioning
Imprint-free concrete finish The form-ply is screwed-on from the rear, ensuring fairfaced concrete quality that is free of screw-head imprints.
197
Column formwork KS Xlife
When shifting wheels are attached, Column formwork KS units with heights of up to 3.60 m can be wheeled and repositioned on the same level. The four Shifting wheels KS per column are easy to clamp onto the formwork and save a great deal of crane time when manually repositioning the units in the horizontal.
Column formwork KS Xlife | Column formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Wall Column formwork Systems KS Xlife
Xlife panel KS 3.30m
185.0 580346500
Xlife-Element KS 3,30m
Protective plate KS top
3.0 580357000
Schutzleiste KS oben
Galvanised Length: 65.3 cm Width: 8.4 cm
Galvanised Width: 80 cm Delivery condition: folded closed
Locking hook KS
0.83 580344000
Verschlusshaken KS
Galvanised Length: 31 cm
Super plate 15.0
0.91 581966000
Superplatte 15,0
Xlife panel KS 2.70m
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
140.0 580337500
Xlife-Element KS 2,70m
Galvanised Width: 80 cm Delivery condition: folded closed
Lifting ring
1.4 580340000
Umsetzring
Galvanised Height: 20 cm
Stacking screw KS
0.77 580345000
Aufstockschraube KS
Galvanised Height: 20 cm
Xlife panel KS 1.20m
66.0 580338500
Xlife-Element KS 1,20m
Galvanised Width: 80 cm Delivery condition: folded closed
Frontal triangular ledge KS 20 4.00m Frontal triangular ledge KS 15 4.00m Stirndreikantleiste KS
Grey
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
Xlife panel KS 0.90m
56.0 580339500
Xlife-Element KS 0,90m
Galvanised Width: 80 cm Delivery condition: folded closed
Protective plate KS
3.3 580343000
Schutzleiste KS
Galvanised Length: 70 cm Width: 9 cm
198
0.93 580347000 0.71 580359000
0.38 588170000
Doka Wall Systems | Column formwork | Column formwork KS Xlife
[kg]
Article n°
[kg]
Article n°
Panel strut 340 without prop head
24.0 580365000
Panel strut 340
30.2 588246000
(A) Plumbing strut 340
14.2 588247000
(A) Prop head
3.5 588244000
Elementstütze 340 ohne Stützenkopf consisting of: Galvanised Length: 190 - 341 cm
(B) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
A
Galvanised Delivery condition: folded closed B
Panel strut 540 without prop head
42.2 580366000
(A) Plumbing strut 540
29.6 588250000
Elementstütze 540 ohne Stützenkopf consisting of: Galvanised Length: 309 - 550 cm
(B) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
A
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
B
C
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
199
Column formwork KS Xlife
C
Column formwork KS Xlife | Column formwork | Doka Wall Systems
[kg] Prop head KS
Article n°
0.85 580342000
Stützenkopf KS
[kg] Side railing KS 0.30m Galvanised Length: 38 cm Width: 30 cm Height: 53 cm
Doka express anchor 16x125mm
0.31 588631000
Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
2.6 580364000
Seitengeländer KS 0,30m
Galvanised Length: 14 cm Width: 11 cm Height: 14 cm
Article n°
Shifting wheel KS
15.8 580358000
Umsetzrad KS
Galvanised Follow the directions in the "Operating Instructions"!
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
Platform adapter KS
Follow the directions in the "Operating Instructions"!
11.4 580341000
Bühnenanschluss KS
Galvanised Length: 74 cm Width: 12 cm Height: 20 cm
Doka column formwork platform 150/90cm Doka-Stützenbühne 150/90cm
211.8 588382000
Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
Galvanised Length: 173 cm Width: 173 cm Height: 130 cm Delivery condition: folded closed
Doka Safety Systems
Platform planking KS
32.3 580360000
Fertigbelag KS
Timber parts varnished yellow Steel parts galvanised Length: 90 cm Width: 85 cm
Railing KS 1.00x0.85m
12.4 580363000
Fertiggeländer KS 1,00x0,85m Galvanised
200
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Column formwork KS Xlife
Doka Wall Systems | Column formwork | Column formwork KS Xlife
201
Column formwork RS | Column formwork | Doka Wall Systems
Column formwork RS Perfect concrete surfaces for circular columns
Exactly circular columns, in superlative fair-faced concrete quality, are achievable using Column formwork RS. The Doka column formwork platform 150/90 cm ensures safe working here. Sewage treatment plant in Hetlingen, Germany Contractors: Wayss & Freytag
202
Doka Wall Systems | Column formwork | Column formwork RS
The steel formwork for circular column cross-sections Exactly circular columns, in superlative fair-faced concrete quality, can be achieved using Column formwork RS.
High-grade concrete finish for the most exacting requirements Precision-manufactured steel formwork for circular columns • ensures that the column cross-section is perfectly circular, even at the shell joints • exactly fitting shell joints thanks to integral centring function
Quick and easy working to give you a competitive edge Profit from the fast progress of work made possible by • integrated connectors with quick-locking feature Column formwork RS
• integrated crane-hoisting points and stacking lugs • only tool needed is a hammer
Enhanced safety throughout the entire operation Superlative safety conditions on your site, thanks to • safe vertical access with caged Ladder system XS • safe working with the Doka column formwork platform 150/90 cm
Circular-section columns, straight from Doka’s modular “construction kit” for smooth forming operations Don’t miss out on this variable formwork • available in shell heights of 25, 50, 100 and 300 cm and in diameters of 30 cm – 60 cm (custom sizes on enquiry) • shells can be repositioned and transported either one at a time or in stacks • with integrated stacking lugs that prevent the shells from slipping
The shell heights of 25, 50, 100 and 300 cm enable a height grid of 0.25 m to be achieved.
Permissible fresh-concrete pressure 150 kN/m²
50
25
100
300
Ladder system XS
203
Column formwork RS | Column formwork | Doka Wall Systems
References
The Column formwork RS can also be combined with Framax Xlife or Alu-Framax Xlife framed formwork panels, and with Circular formwork H20 elements. Europark II, Austria Contractors: Alpine, DYWIDAG, Strabag
204
Column formwork RS
Doka Wall Systems | Column formwork | Column formwork RS
When only perfectly circular CIP columns will do, Column formwork RS is the system of choice. River Gate office building, Austria Contractors: DYWIDAG, Strabag
205
Column formwork RS | Column formwork | Doka Wall Systems
Article list [kg]
Article n°
149.0 65.0 36.0 22.5 166.0 76.0 42.0 26.0 175.0 80.7 44.9 27.7 188.0 85.0 48.0 29.0 195.0 88.0 49.0 31.5 217.0 96.5 53.0 34.2
587909000 587908000 587907000 587944000 587912000 587911000 587910000 587945000 587915000 587914000 587913000 587946000 587918000 587917000 587916000 587947000 587921000 587920000 587919000 587948000 587927000 587926000 587925000 587950000
[kg]
Article n°
Doka Wall Column formwork Systems RS
Column element RS D30 3.00m Column element RS D30 1.00m Column element RS D30 0.50m Column element RS D30 0.25m Column element RS D35 3.00m Column element RS D35 1.00m Column element RS D35 0.50m Column element RS D35 0.25m Column element RS D40 3.00m Column element RS D40 1.00m Column element RS D40 0.50m Column element RS D40 0.25m Column element RS D45 3.00m Column element RS D45 1.00m Column element RS D45 0.50m Column element RS D45 0.25m Column element RS D50 3.00m Column element RS D50 1.00m Column element RS D50 0.50m Column element RS D50 0.25m Column element RS D60 3.00m Column element RS D60 1.00m Column element RS D60 0.50m Column element RS D60 0.25m Stützenelement RS
Panel strut 540 without prop head
42.2 580366000
(A) Plumbing strut 540
29.6 588250000
Elementstütze 540 ohne Stützenkopf consisting of: Galvanised Length: 309 - 550 cm
(B) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
A
Painted blue Ø 24 cm, 25 cm, 55 cm, 65 cm, 70 cm, 75 cm and 80 cm on inquiry!
B
C
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of:
Panel strut 340 without prop head
24.0 580365000
(A) Plumbing strut 340
14.2 588247000
Elementstütze 340 ohne Stützenkopf consisting of: Galvanised Length: 190 - 341 cm
(B) Adjusting strut 120
(B) Prop shoe 7.2 588248000
Galvanised Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120 Galvanised Delivery condition: folded closed
A
B C
206
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
Doka Wall Systems | Column formwork | Column formwork RS
[kg]
Article n°
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Eurex 60 550 depending on length, comprising:
(A) Plumbing strut Eurex 60 550
(B) Extension Eurex 60 2.00m 2.1 588245000
42.5 582658000
29.6 588250000
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60 10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
(C) Coupler Eurex 60
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
Eurex 60 550
Powder-coated, blue Aluminium Length: 343 - 553 cm
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
Article n°
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm
(G) Prop head
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Column formwork RS
Elementstütze 540 consisting of:
[kg]
Delivery condition: separate parts G
D
G
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
207
Column formwork RS | Column formwork | Doka Wall Systems
[kg] Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Article n°
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
[kg] Screw-set M16x40 DIN 933 8.8
Schraubensatz M16x40 DIN 933 8.8 Galvanised Width-across: 24 mm
Multi-purpose waling WS10 Top50 2.50m Multi-purpose waling WS10 Top50 2.75m Multi-purpose waling WS10 Top50 3.00m Multi-purpose waling WS10 Top50 3.50m Multi-purpose waling WS10 Top50 4.00m Multi-purpose waling WS10 Top50 4.50m Multi-purpose waling WS10 Top50 5.00m Multi-purpose waling WS10 Top50 5.50m Multi-purpose waling WS10 Top50 6.00m Mehrzweckriegel WS10 Top50
Doka column formwork platform 150/90cm Doka-Stützenbühne 150/90cm
Article n°
0.56 582831000
48.7 54.2 60.2 68.4 79.4 89.1 102.0 112.4 118.0
580009000 580010000 580011000 580012000 580013000 580014000 580015000 580016000 580017000
51.0 60.4 71.5 82.1 92.2 102.0 112.4 122.2
580046000 580048000 580050000 580052000 580054000 580056000 580058000 580060000
Painted blue
211.8 588382000
Galvanised Length: 173 cm Width: 173 cm Height: 130 cm Delivery condition: folded closed
Platform adapter RS
17.5 587940000
Bühnenanschluss RS
Galvanised Length: 78 cm Width: 78 cm Height: 19 cm
Bracket connection RS
Steel waling WS10 Top50 2.50m Steel waling WS10 Top50 3.00m Steel waling WS10 Top50 3.50m Steel waling WS10 Top50 4.00m Steel waling WS10 Top50 4.50m Steel waling WS10 Top50 5.00m Steel waling WS10 Top50 5.50m Steel waling WS10 Top50 6.00m Stahlwandriegel WS10 Top50
Painted blue
5.2 587941000
Konsolenanschluss RS
Galvanised Height: 61 cm
Super plate 15.0
0.91 581966000
Superplatte 15,0
Framax bracket 90 Framax-Konsole 90
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
12.5 588167000 Galvanised Width: 103 cm Height: 185 cm Delivery condition: railing included
Framax universal fixing bolt 10-25cm
0.69 583002000
Connecting pin 10cm
0.34 580201000
Framax-Universalverbinder 10-25cm Galvanised Length: 36 cm
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
Doka 4-part chain 3.20m Doka-Vierstrangkette 3,20m
15.0 588620000 Follow the directions in the "Operating Instructions"!
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Sealing tape KS 20x5mm 10m Dichtungsband KS 20x5mm 10m
208
0.17 580348000
Doka Wall Systems | Column formwork | Column formwork RS
[kg]
Article n°
[kg]
Article n°
Doka Safety Systems
Column formwork RS
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
209
Column formwork Top 50 | Column formwork | Doka Wall Systems
Column formwork Top 50 The formwork for cast-in-place columns of any shape and size
Complicatedly shaped fair-faced concrete columns: just the job for Column formwork Top 50. Using only a very few standard components, this system can tackle just about any column. Berlin Brandenburg International Airport, Germany Contractors: Porr
210
Doka Wall Systems | Column formwork | Column formwork Top 50
The economical way of forming customised columns Complicated column cross-sections, large column heights, many formwork re-use cycles, tough specifications regarding the concrete finish – Column formwork Top 50 can handle them all.
Any column dimension possible thanks to modular “construction kit” system Work even more efficiently • by being able to quickly form any cross-section of column using standard components • by having optimum adaptability to any special shape • using only one splice plate for column cross-sections of up to 120 cm x 120 cm • using any form-facing, for superb concrete surfaces
Greater cost-efficiency Column formwork Top 50
thanks to flexible Doka solution Doka helps you obtain an efficient workflow on the site by giving you • advice, planning and pre-assembly from a “one-stop shop” • extremely flexible adaptability to widely differing requirements
Enhanced safety throughout the entire operation Superlative safety conditions on your site, thanks to • safe vertical access with the Ladder system XS • safe working with the Doka column formwork platform 150/90 cm
Only three different system components
Ladder system XS
Column formwork Top 50 can be face with any desired form-facing. The Ready-toUse Service will deliver even the most unusual shapes to the site, on time and ready for immediate use.
Execution of (shell) construction work
211
Column formwork Top 50 | Column formwork | Doka Wall Systems
References Superlative site safety is ensured by the Ladder system XS in conjunction with the Doka column formwork platform 150/90 cm. Prologis Park Ebina Project, Japan Contractors: Fujita
Even complex cross-sections are no problem for Column formwork Top 50. Pre-assembly by the Doka Ready-to-Use Service guarantees absolute fitting accuracy. Terminal Tower, Linz, Austria Contractors: “ARGE Terminal Tower” consortium
212
Doka Wall Systems | Column formwork | Column formwork Top 50
Column formwork Top 50 consists of only three different system components and is ideal for forming large numbers of columns economically.
Column formwork Top 50
Prime Tower, Dubai Contractors: Al Ashram Contracting
Sharp edges, optimum concrete appearance. Thanks to the unrestricted choice of form-facing, all architectural specifications can be fulfilled. Stadium in Fröttmaning, Germany Contractors: “ARGE Stadion Fröttmaning” consortium
213
Column formwork Top 50 | Column formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Wall Column formwork Systems Top 50
Multi-purpose waling WS10 Top50 1.00m Multi-purpose waling WS10 Top50 1.25m Mehrzweckriegel WS10 Top50
19.6 580003000 24.7 580004000
Corner connecting plate 90/50 Winkellasche 90/50
Painted blue Length: 51 cm Width: 40 cm
Painted blue
Steel waling WS10 Top50 1.00m Steel waling WS10 Top50 1.25m Stahlwandriegel WS10 Top50
20.2 580040000 25.0 580041000
Column connecting plate 6/8 Stützenlasche 6/8
Universal angle tie bracket
4.4 580604000
Universal-Winkelspanner
Mehrzweckriegel WU12 Top50
15.0 580072000
Painted blue Length: 58 cm
Painted blue
Multi-purpose waling WU12 Top50 1.50m Multi-purpose waling WU12 Top50 1.75m
13.8 580603000
Painted blue Length: 20 cm
37.5 580020000 44.2 580021000
Painted blue
Steel waling WU12 Top50 1.50m Steel waling WU12 Top50 1.75m Stahlwandriegel WU12 Top50
37.9 580087000 44.2 580088000
Painted blue
Flange clamp H20
1.0 580135000
Flanschklammer H20
Tie rod 15.0mm galvanised 1.00m Tie rod 15.0mm non-treated 1.00m Ankerstab 15,0mm 1,0m
1.4 581823000 1.4 581874000
Galvanised Width: 13 cm Width-across: 19 mm
Flange clamp G
1.1 580120000
Flanschklammer G
Wing nut 15.0
0.31 581961000
Flügelmutter 15,0 Galvanised Length: 10 cm Height: 5 cm Width-across: 27 mm
Galvanised Width: 13 cm Width-across: 19 mm
Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Lifting bracket
Galvanised Length: 14 cm
6.2 580460000
Kranöse
Galvanised Height: 59 cm
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Lifting bracket for column formwork Kranöse für Stützenschalung
Galvanised, powder-coated Length: 85 cm Width: 85 cm
214
65.0 580607000
Doka Wall Systems | Column formwork | Column formwork Top 50
[kg]
Article n°
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Eurex 60 550
Eurex 60 550 depending on length, comprising:
(A) Plumbing strut Eurex 60 550
(B) Extension Eurex 60 2.00m 2.1 588245000
42.5 582658000
14.2 588247000
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
(D) Connector Eurex 60 7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
(C) Coupler Eurex 60
Galvanised Length: 190 - 341 cm
(D) Adjusting strut 120
Article n°
Powder-coated, blue Aluminium Length: 343 - 553 cm
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
[kg]
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
(E) Plumbing strut shoe Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised Length: 302 - 543 cm
(G) Prop head
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of:
Column formwork Top 50
Panel strut 540
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm Delivery condition: separate parts G
D
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed G
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
215
Column formwork Top 50 | Column formwork | Doka Wall Systems
[kg] Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Article n°
0.31 588631000
[kg] Universal railing shackle
Doka coil 16mm
Galvanised Height: 20 cm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
3.0 580478000
Universal-Geländerbügel
Galvanised Length: 18 cm Follow fitting instructions!
Article n°
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Galvanised Length: 101 cm Height: 159 cm
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Top scaffold bracket L painted Betonierkonsole L lackiert
12.0 587153000 Screw-on coupler 48mm 50
Painted blue Length: 101 cm Height: 159 cm
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Tool box GF
GF-Werkzeugbox included in scope of supply:
(A) Reversible ratchet 1/2"
6.5 580390000 0.73 580580000
Galvanised Length: 30 cm
Universal bracket 60
14.0 580477000
Universal-Konsole 60
Galvanised Length: 86 cm Height: 181 cm
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
216
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
Doka Wall Systems | Column formwork | Column formwork Top 50
[kg] Assembly angle Top50
Article n°
[kg]
Article n°
7.4 580082000
Montagelasche Top50
Painted blue Length: 55 cm Width: 48 cm
Strip tensioner B 5.00m
3.5 580394000
Bandzwinge B 5,00m
Galvanised
Hole gauge Top50
2.9 580080000
Bohrplatte Top50
Painted blue Length: 17 cm Width: 15 cm Tool: Drill bit (diameter 10 mm)
Positioning rail .....m
1.8 580079000
Führungsschiene .....m
Angle connector 9x5cm
Column formwork Top 50
Painted blue Weight per linear metre
0.22 580381000
Winkelverbinder 9x5cm
Galvanised
Rafter plate right Rafter plate left
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Galvanised Length: 17 cm
Doka 4-part chain 3.20m Doka-Vierstrangkette 3,20m
15.0 588620000 Follow the directions in the "Operating Instructions"!
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
217
Column formwork Framax Xlife | Column formwork | Doka Wall Systems
Column formwork Framax Xlife Columns from the Framax Xlife “construction kit”
Rectangular CIP columns can be formed at top speed with equipment that will in any case be available on the site. Only four universal panels are needed to achieve column cross-sections of up to 105 cm x 105 cm, in a 5 cm grid. The sturdy frames permit fresh-concrete pressures of up to 90 kN/m², allowing the formwork to be filled at high speed. Nordpan-Rubner timber building panels factory, Austria Contractors: Walter Frey
218
Doka Wall Systems | Column formwork | Column formwork Framax Xlife
The flexible way to form columns without form-ties Universal panels from the framed formwork systems are ideal for forming varied cross-sections of column in a 5 cm grid – without needing a dedicated column formwork system on the site.
Flexible, fast forming with Framax Xlife universal panels Speedy and efficient working, thanks to • column cross-sections of up to 105 cm x 105 cm • flexible adaptation in a 5 cm grid • panels are quick to assemble and reset
Reduced quantities and costs Column formwork Framax Xlife
thanks to flexibility The versatile universal panels can be used for • columns, corners, stop-ends and wall junctions • and also as Framax Xlife wall elements
Enhanced safety using Ladder system XS and column formwork platform Safety right from the start, thanks to • safe workplace access routes for climbing up and down • safe handling for attaching and detaching the formwork • safe working during pouring operations
Ladder system XS
Xlife sheet
270
330
Framax Xlife universal panels are available in widths of 90 cm and 120 cm and in panel heights of 90 cm, 135 cm, 270 cm and 330 cm.
90
135
Permissible fresh-concrete pressure 90 kN/m²
90
120
219
Column formwork Framax Xlife | Column formwork | Doka Wall Systems
References
The Alu-Framax Xlife system also has a universal panel: with a width of 75 cm, this is ideal for columns, stop-ends and corners. In this way, columns can be formed without needing any crane assistance at all. Altitude 25 residential building, Great Britain Contractors: Howard Holdings PLC/FDL
220
Column formwork Framax Xlife
Doka Wall Systems | Column formwork | Column formwork Framax Xlife
Reclosable holes in the form-facing, in a 5 cm grid, make the universal panels very versatile. Universal fixing bolts are used to quickly and easily assemble the panels into column cross-sections of up to 105 cm x 105 cm. Shopping centre in Vöcklabruck, Austria Contractors: “ARGE Einkaufszentrum Vöcklabruck” consortium
221
Column formwork Framax Xlife | Column formwork | Doka Wall Systems
Article list [kg]
Article n°
148.0 79.3 63.0 182.6
588122500 588124500 588120500 588228500
[kg]
Article n°
Doka Wall Column formwork Systems Framax Xlife
Framax Xlife universal panel 0.90x2.70m Framax Xlife universal panel 0.90x1.35m Framax Xlife universal panel 0.90x0.90m Framax Xlife universal panel 0.90x3.30m Framax Xlife-Uni-Element
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of: 2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Galvanised, powder-coated Corners marked in blue
(B) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised Length: 190 - 341 cm
Framax Xlife universal panel 1.20x2.70m Framax Xlife universal panel 1.20x1.35m Framax Xlife universal panel 1.20x0.90m Framax Xlife universal panel 1.20x3.30m Framax Xlife-Uni-Element
225.8 116.7 91.5 276.7
588601500 588603500 588604500 588671500
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
Galvanised, powder-coated Corners marked in blue
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementstütze 540 consisting of:
Alu-Framax Xlife universal panel 0.75x2.70m Alu-Framax Xlife universal panel 0.75x1.35m Alu-Framax Xlife universal panel 0.75x0.90m Alu-Framax Xlife-Uni-Element
64.2 588322500 33.8 588324500 27.0 588326500
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
(B) Prop shoe
Powder-coated Corners marked in blue
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 540
29.6 588250000
Galvanised Length: 309 - 550 cm
(D) Adjusting strut 220
10.6 588251000
Length: 171 - 224 cm Galvanised Delivery condition: folded closed
Framax quick acting clamp RU Framax-Schnellspanner RU
3.3 588153400
Galvanised Length: 20 cm
Framax universal fixing bolt 10-16cm
0.60 588158000
Super plate 15.0
0.91 581966000
Framax-Universalverbinder 10-16cm Galvanised Length: 26 cm
Superplatte 15,0
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
222
Doka Wall Systems | Column formwork | Column formwork Framax Xlife
[kg]
Article n°
Eurex 60 550
[kg] Doka express anchor 16x125mm
Eurex 60 550 depending on length, comprising:
Doka-Expressanker 16x125mm
(A) Plumbing strut Eurex 60 550
18.0 582651000
Powder-coated, blue Aluminium Length: 250 cm
(C) Coupler Eurex 60
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
42.5 582658000
Powder-coated, blue Aluminium Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m
Article n°
8.6 582652000
Aluminium Length: 100 cm Diameter: 12.8 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
(D) Connector Eurex 60
3.9 582657000
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
Framax bracket 90
12.5 588167000
Framax-Konsole 90
(E) Plumbing strut shoe Eurex 60
Galvanised Width: 103 cm Height: 185 cm Delivery condition: railing included
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
(G) Prop head
3.5 588244000
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm Delivery condition: separate parts G
D
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
G
Galvanised Height: 7 cm
Doka column formwork platform 150/90cm Doka-Stützenbühne 150/90cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
211.8 588382000
Galvanised Length: 173 cm Width: 173 cm Height: 130 cm Delivery condition: folded closed
223
Column formwork Framax Xlife
Galvanised Length: 302 - 543 cm
Column formwork Framax Xlife | Column formwork | Doka Wall Systems
[kg] Framax lifting chain 4-part 3.20m Framax-Vierergehänge 3,20m
Article n°
17.0 588230000
Follow the directions in the "Operating Instructions"!
Framax transport bolt 5kN
1.9 588621000
Framax-Transportbolzen 5kN
Follow the directions in the "Operating Instructions"!
Framax lifting hook
10.6 588149000
Framax-Umsetzbügel
Galvanised Height: 22 cm Follow the directions in the "Operating Instructions"!
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
Framax frontal triangular ledge 2.70m Framax-Stirndreikantleiste 2,70m
0.38 588170000
1.9 588129000
Grey
Universal plug R20/25
0.003 588180000
Kombi Ankerstopfen R20/25 Blue Diameter: 3 cm
Framax plug R24.5
0.003 588181000
Framax-Abdeckstopfen R24,5 Yellow Diameter: 2 cm
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
224
[kg]
Article n°
Column formwork Framax Xlife
Doka Wall Systems | Column formwork | Column formwork Framax Xlife
225
Column formwork Frami Xlife | Column formwork | Doka Wall Systems
Column formwork Frami Xlife For forming columns from the Frami Xlife “construction kit”
Rectangular CIP columns can be formed at top speed with equipment that will in any case be available on the site. Only four universal panels are needed to obtain the desired column cross-section, in a 5 cm grid. The sturdy frames permit fresh-concrete pressures of up to 80 kN/m², allowing the formwork to be filled at high speed.
226
Doka Wall Systems | Column formwork | Column formwork Frami Xlife
The lightweight framed formwork for rectangular cast-in-place columns Universal panels from the framed formwork systems are ideal for forming varied cross-sections of column in a 5 cm grid – without needing a dedicated column formwork system on the site.
Flexible, fast forming with Frami Xlife universal panels Speedy and efficient working, thanks to • column cross-sections of up to 65 cm x 65 cm • flexible adaptation in a 5 cm grid • panels are quick to assemble and reset • high-grade Frami Xlife sheet and hot-dip galvanised frames
Column formwork Frami Xlife
Reduced quantities and costs from maximised utilisation of the formwork The Frami Xlife universal panels have many different uses • for columns • for corners • for stop-ends • for wall junctions • or simply as Frami Xlife wall elements
Enhanced safety with the Ladder system XS Safety right from the start, thanks to
Wide range of uses
• safe workplace access routes for climbing up and down • safe handling for attaching and detaching the formwork • safe working during pouring operations • permissible fresh-concrete pressure 80 kN/m²
Ladder system XS
Xlife sheet
Permissible fresh-concrete pressure 80 kN/m²
227
Column formwork Frami Xlife | Column formwork | Doka Wall Systems
Article list [kg]
Article n°
39.0 49.5 83.5 93.0
588402500 588407500 588484500 588416500
[kg]
Article n°
Doka Wall Column formwork Systems Frami Xlife
Frami Xlife universal panel 0.75x1.20m Frami Xlife universal panel 0.75x1.50m Frami Xlife universal panel 0.75x2.70m Frami Xlife universal panel 0.75x3.00m Frami Xlife-Uni-Element
Panel strut 340 without prop head
24.0 580365000
(A) Plumbing strut 340
14.2 588247000
Elementstütze 340 ohne Stützenkopf consisting of: Galvanised Length: 190 - 341 cm
Galvanised
(B) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm Galvanised Delivery condition: folded closed
Frami clamp
1.2 588433000
Frami-Spanner
A
Galvanised Length: 11 cm B C
Frami universal fixing bolt 5-12cm Frami-Universalverbinder 5-12cm
0.43 588479000
Frami corner connector
Frami strut head
1.4 508437002
Frami-Strebenkopf
Galvanised Length: 23 cm
Galvanised Width: 9 cm Height: 14 cm
0.40 588446000
Frami-Eckverbinder
Galvanised Length: 19 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Super plate 15.0
0.91 581966000
Superplatte 15,0
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
Frami plumbing strut 260
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
13.9 588437000
Frami-Justierstütze 260
0.31 588631000
Galvanised Length: 145 - 258 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Frami bracket 60
7.7 588442000
Frami-Konsole 60
Galvanised Length: 98 cm Height: 157 cm
228
Doka Wall Systems | Column formwork | Column formwork Frami Xlife
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
[kg]
Article n°
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
[kg] Frami frame hole plug
Article n°
0.002 588444000
Frami-Ankerstopfen
Blue Diameter: 2.5 cm
Frami plug
0.003 588445000
Frami-Abdeckstopfen Yellow Diameter: 2 cm
Galvanised
Doka Safety Systems
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Screw-on coupler 48mm 50
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
0.84 682002000
Anschraubkupplung 48mm 50
Doka 4-part chain 3.20m
Column formwork Frami Xlife
Galvanised Width-across: 22 mm
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Frami transport hook 2.5kN
0.56 588494000
Frami-Transporthaken 2,5kN
Galvanised Length: 17.5 cm Follow the directions in the "Operating Instructions"!
Frami lifting hook
7.5 588438000
Frami-Umsetzbügel
Galvanised Width: 15 cm Height: 21 cm Follow the directions in the "Operating Instructions"!
Framax triangular ledge 2.70m Framax-Dreikantleiste 2,70m
0.38 588170000
229
Single-sided formwork Supporting construction frame | Single-sided formwork | Doka Wall Systems
Supporting construction frame Unique in allowing continuous height adjustment up to 12.80 m
On single-sided wall formworks of up to 12.80 m in height, Doka supporting construction frames ensure that the concrete forces are safely transferred. The system incorporates a host of detailed solutions which make it easier and faster to handle in everyday practice on the site. Underground station on the U4 Hafencity line in Hamburg, Germany Contractors: “ARGE U4 Ingenieurbau” consortium
230
Doka Wall Systems | Single-sided formwork | Supporting construction frame
The safe way to form single-sided walls “Supporting construction frames” enable the concreting forces to be safely transferred by way of diagonal anchors in cases where it is not possible to tie timber-beam elements or framed formwork panels through the concrete.
Adjustable down to the last cm thanks to innovative combinability The unique “Supporting construction frame” permits continuous adjustability, thanks to its • practical attachable frame • facility for combining the “Variabel” and “Universal F” supporting construction frames
Time and cost savings Supporting construction frame
from high-speed repositioning The right repositioning solution in every case: • by crane • by travelling unit, on rails or rollers
Enhanced safety thanks to its unrivalled range of accessories Even greater safety, thanks to standardised solutions • concrete forces are safely transferred • ready-to-use platform solutions for all heights • safe vertical access routes for work inside the construction
Adjustable down to the last cm
Ladder system XS
231
Supporting construction frame | Single-sided formwork | Doka Wall Systems
System Supporting construction frame Universal F • For pour heights of up to 12.80 m • Flexible height adjustment • Tall units can be wheeled • Vertical stacking is easy and fast • Rapid adaptation to any unevenness in the ground • Pre-mounted bracing-tube couplers • Comprehensive safety accessories
“Variabel” supporting construction frame • Assembled from standard steel walings and add-on components • Easy to brace with scaffold tubes • Can be set up and moved by hand • Maximum pour-height 4 m
Single-sided walls in a single pour Combining extra-large Framax Xlife panels with the Supporting construction frame Universal F makes it possible to pour even very high walls in one continuous operation.
232
Doka Wall Systems | Single-sided formwork | Supporting construction frame
Utilisation Custom applications
up to 8.10 m
B
A
9799-208-02
up to 6 m
C D
up to 12.80 m
9739-224-02
9739-347-02
up to 10.40 m
up to 4 m
up to 4.50 m
Supporting construction frame
Positioned in the horizontal and anchored to the structure, Supporting construction frames can be used to make heavy-duty platforms for formwork assignments at lofty heights.
9739-361-01
9739-222-02
Variable vertical stacking configurations
Wall heights above 10 m
• Standard steel walings and add-on components are combined to assemble “Supporting construction frames Variabel” for heights of up to 4.00 m
• For walls of up to 10.40 m in height, the Supporting construction frame F can be stacked on top of an Attachable frame F 2.40 m.
• Pour-heights of up to 4.50 m are possible with Supporting construction frames Universal F 4.50 m
• With two Attachable frames F 2.40 m, pour heights of up to 12.80 m are possible.
• Pour-heights of up to 6.00 m are possible by adding an Attachable frame F 1.50 m • Pour-heights of up to 8.10 m are possible by adding an Attachable frame F 1.50 m or an Attachable frame F 2.00 m
233
Supporting construction frame | Single-sided formwork | Doka Wall Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Load-bearing Supporting construction Systems frame
Support. construction frame "Variable" 3.30m Abstützbock Variabel 3,30m consisting of:
187.8 580516000
Tension plate
2.5 580534000
Zuglasche
Painted blue Length: 19 cm
(A) Waling WU14 for supporting construction frame 99.0 580510000 Painted blue Height: 252 cm
(B) Multi-purpose waling WS10 Top50 2.00m
38.9 580007000
Painted blue
(C) Tension plate
2.5 580534000
Painted blue Length: 19 cm
(D) Supporting shoe
9.5 580532000
Painted blue Length: 28 cm
(E) Connecting pin 10cm
0.34 580201000
Multi-purpose waling WS10 Top50 1.00m Multi-purpose waling WS10 Top50 1.75m Multi-purpose waling WS10 Top50 2.00m Multi-purpose waling WS10 Top50 2.50m Multi-purpose waling WS10 Top50 2.75m Multi-purpose waling WS10 Top50 3.00m Multi-purpose waling WS10 Top50 3.50m Multi-purpose waling WS10 Top50 4.00m Mehrzweckriegel WS10 Top50
580003000 580006000 580007000 580009000 580010000 580011000 580012000 580013000
20.2 35.8 40.2 51.0 56.1 60.4 71.5 82.1
580040000 580043000 580044000 580046000 580047000 580048000 580050000 580052000
Painted blue
Galvanised Length: 14 cm
(F) Spring cotter 5mm
19.6 35.0 38.9 48.7 54.2 60.2 68.4 79.4
0.05 580204000
Galvanised Length: 13 cm
(G) Spindle strut 12 3.00m
32.0 580521000
Painted blue Length: 201 - 234 cm
(H) Screw-on coupler 48mm 50
0.84 682002000
Galvanised Width-across: 22 mm Painted blue A
Steel waling WS10 Top50 1.00m Steel waling WS10 Top50 1.75m Steel waling WS10 Top50 2.00m Steel waling WS10 Top50 2.50m Steel waling WS10 Top50 2.75m Steel waling WS10 Top50 3.00m Steel waling WS10 Top50 3.50m Steel waling WS10 Top50 4.00m Stahlwandriegel WS10 Top50
Painted blue
G H
D
C
Spindle strut 12 3.00m Painted blue Length: 201 - 234 cm
E F
Waling WU14 for supporting construction frame
99.0 580510000
(A) Steel section WU14 f. supp. constr. frame
81.0 580509000
Abstützbockriegel WU14 consisting of: Painted blue Height: 250 cm
(B) Pressure shoe
6.2 580531000
Painted blue Height: 32 cm
(C) Anchoring shoe
12.0 580533000
Painted blue Height: 51 cm Painted blue Height: 252 cm
Supporting shoe
9.5 580532000
Stützschuh
Painted blue Length: 28 cm
234
32.0 580521000
Spindelstrebe 12 3,00m
B
Doka Wall Systems | Single-sided formwork | Supporting construction frame
[kg] Spindle strut T7 305/355cm
Article n°
35.0 584327000
Spindelstrebe T7 305/355cm
[kg] Attachable frame F 1.50m
Article n°
236.0 580502000
Anbaurahmen F 1,50m
Painted blue Length: 280 cm
Galvanised
Attachable frame F 2.00m
451.0 580501000
Anbaurahmen F 2,00m
Formwork element connector FF20/50 Z Elementverbinder FF20/50 Z
6.0 587533000
Connecting pin 10cm
Front spindle for supp. construction frame Abstützbockspindel vorne
Painted blue Length: 55 cm
8.5 580508000
Galvanised
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
Spring cotter 5mm
Rear spindle for supp. construction frame Abstützbockspindel hinten
18.3 580515000
Galvanised
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Supporting construct. frame Universal F 4.50m Abstützbock-Universal F 4,50m
306.0 580500000
Anchor waling 0.70m Anchor waling 1.95m Anchor waling 2.95m
27.0 580517000 76.3 580545000 110.0 580546000
Ankerriegel
Painted blue
Painted blue Length: 196 cm Height: 365 - 394 cm
Multi-purpose waling WU12 Top50 2.00m Multi-purpose waling WU12 Top50 3.00m Mehrzweckriegel WU12 Top50
50.0 580022000 75.7 580024000
Painted blue
Anchoring profile 0.55m
44.5 582904000
Ankerprofil 0,55m
Painted blue
235
Supporting construction frame
Painted blue Length: 394 cm
Supporting construction frame | Single-sided formwork | Doka Wall Systems
[kg] Anchor waling positioner
Article n°
0.62 580539000
Ankerriegelhalter
[kg] Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised Length: 31 cm
Galvanised Length: 21 cm
Framax supporting construct. frame connector Corner plate supporting constr. frame Ecklasche Abstützbock
44.4 580518000
Framax-Bocklasche
15.0 580506000
Painted blue Height: 77 cm
Painted blue Length: 92 cm Width: 92 cm
Facade waling WS10 2.50m
Article n°
50.0 580692000
Fassadenriegel WS10 2,50m
Painted blue
Framax supporting construct. frame bolt 36cm Framax-Bockschraube 36cm
0.62 580505000
Galvanised
Supporting construction distancer 20cm Bockdistanz 20cm
9.4 580519000
Framax pressure plate 6/15
0.80 588183000
Framax-Druckplatte 6/15
Galvanised Length: 25 cm Width: 19 cm Height: 20 cm
Galvanised
Attachable roller 200 Clamp for supp. constr. distancer 20cm Klemme für Bockdistanz 20cm
5.0 582920000
19.3 580538000
Ansteckrolle 200
Painted blue Height: 38 cm
Galvanised Length: 36 cm Width: 7 cm
Attachable roller 250
47.0 580537000
Ansteckrolle 250
Waling-to-bracket holder 9-15cm Riegelhalter 9-15cm
2.7 580625000
Painted blue Height: 78 cm
Galvanised
Waling-to-bracket holder
2.5 580526000
Keilriegelhalter
Winch with transport device
Galvanised Length: 26 cm Height: 31 cm
Hubwinde mit Transportroller
Painted blue Height: 127 cm Follow the directions in the "Operating Instructions"!
Framax universal fixing bolt 10-16cm
0.60 588158000
Framax universal fixing bolt 10-25cm
0.69 583002000
Framax-Universalverbinder 10-16cm Galvanised Length: 26 cm
Framax-Universalverbinder 10-25cm Galvanised Length: 36 cm
236
37.0 580541000
Doka Wall Systems | Single-sided formwork | Supporting construction frame
[kg] Travelling profile F 2.00m front Verfahrprofil F 2,00m vorne
Article n°
195.0 582925000
[kg] Bolting plate F 2.00m
Article n°
3.0 582933000
Schraubplatte F 2,00m
Galvanised Length: 20 cm
Galvanised Length: 600 cm
Connection plate F 2.00m
2.3 582934000
Verbindungsplatte F 2,00m
Galvanised Length: 42 cm
Wheel connector F 2.00m front Radanschluss F 2,00m vorne
34.0 582926000
Galvanised Length: 30 cm Width: 30 cm Height: 16.5 cm
14.0 582935000
Hubkonsole F 2,00m hinten
Galvanised Height: 48.6 cm
0.80 582927000
Klemmbacke F 2,00m
Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
Galvanised Length: 12.5 cm
Clamping plate F 2.00m
Anschraubkupplung
Galvanised Width-across: 22 mm
3.8 582928000
Klemmplatte F 2,00m
0.84 682002000 0.71 586013000
Galvanised Length: 24 cm
Intermediate plate F 2,00m
6.0 582929000
Zwischenplatte F 2,00m
Swivel coupler 48mm Galvanised Width-across: 22 mm
Galvanised Length: 25 cm Width: 18 cm
Travelling profile F 2.00m rear Verfahrprofil F 2,00m hinten
195.0 582930000
Galvanised Length: 574 cm
Wheel connector F 2.00m rear Radanschluss F 2,00m hinten
1.5 582560000
Drehkupplung 48mm
44.0 582931000
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Galvanised
Galvanised Height: 61.5 cm
Screw-on access bracket MF75 Anschraubbühne MF75
Connection plate F 2.00m
17.0 582932000
Anschlussplatte F 2,00m
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
19.0 580669000
Galvanised Length: 113 cm Height: 152 cm
Galvanised Length: 44.1 cm Width: 35.7 cm
237
Supporting construction frame
Clamping jaw F 2.00m
Lifting bracket F 2.00m rear
Supporting construction frame | Single-sided formwork | Doka Wall Systems
[kg] Swivel plate MF
Article n°
4.5 580672000
Schwenkplatte MF
[kg]
Article n°
Hexagon spanner head 46 3/4"
0.70 580512000
Extension 20cm 3/4"
0.68 580683000
Sechskantnuss 46 3/4"
Galvanised Length: 29 cm Height: 20 cm Verlängerung 20cm 3/4"
Crane sling 3.50m
8.8 580461000
Kranseilschlaufe 3,50m
Diameter: 16 cm Follow the directions in the "Operating Instructions"!
Cone spanner 20.0
3.5 581471000
Konusschlüssel 20,0
Galvanised Length: 57 cm
Testing truss for diagonal anchors 15.0/20.0 Prüfbock für Schräganker 15,0/20,0 Galvanised Length: 32 cm Width: 25 cm Height: 19 cm
Universal tool box 15.0
13.5 580514000
Clearance-cone dismantling tool Lösewerkzeug Freistellkonus
0.67 581864000
Galvanised Length: 10.7 cm Width-across: 24 mm
9.1 580392000
Universal-Werkzeugbox 15,0 included in scope of supply:
Spindle strut T6 100/150cm
(A) Reversible ratchet 1/2"
0.73 580580000
Galvanised
Galvanised Length: 30 cm
(B) Fork wrench 13/17 (C) Fork wrench 22/24 (D) Fork wrench 30/32 (E) Fork wrench 36/41 (F) Ring spanner 17/19 (G) Square nut 22 (H) Box spanner 41 (I) Extension 11cm 1/2" (J) Extension 22cm 1/2" (K) Universal joint coupling (L) Nut for box spanner 19 1/2" L (M) Box nut 13 1/2" (N) Box nut 24 1/2" (O) Box nut 30 1/2" (P) Positioning cone spanner 15.0 DK
0.08 0.22 0.80 1.0 0.27 0.31 0.99 0.20 0.31 0.16 0.16 0.06 0.12 0.20 0.30
580577000 580587000 580897000 580586000 580590000 580589000 580585000 580581000 580582000 580583000 580598000 580576000 580584000 580575000 580579000
12.5 584323000
Spindelstrebe T6 100/150cm
Spindle strut T7 100/150cm
16.8 584309000
Spindelstrebe T7 100/150cm
Galvanised
Galvanised Length: 8 cm Width-across: 30 mm
Spindle strut T7 200/250cm
26.2 584325000
Spindelstrebe T7 200/250cm
Galvanised
Reversible ratchet 3/4"
1.5 580894000
Umschaltknarre 3/4"
Galvanised Length: 50 cm
238
Doka Wall Systems | Single-sided formwork | Supporting construction frame
[kg] Spindle strut T7 250/300cm
Article n°
29.4 584326000
Spindelstrebe T7 250/300cm
Galvanised
[kg] Spindle strut SL-1 T16 140/225cm
87.8 582872000
Spindle strut SL-1 T16 220/375cm
123.0 582874000
Spindelstrebe SL-1 T16 140/225cm Galvanised
Spindelstrebe SL-1 T16 220/375cm Galvanised
57.5 584328000
Spindelstrebe T10 350/400cm
Galvanised
Attachable frame F 2.40m
1107.0 582901000
Anbaurahmen F 2,40m
Painted blue Length: 576 cm
Stacking plate F 2.40m
32.5 582902000
Aufstocklasche F 2,40m
Painted blue Height: 63.5 cm
Spindle strut SL-1 T16 100/140cm
Spindelstrebe SL-1 T16 100/140cm Galvanised
54.1 582871000
Spindle for attachable frame F 2.40m Spindel für Anbaurahmen F 2,40m
20.1 582903000
Galvanised Height: 47.5 cm
Lowering wedge 1000kN
53.5 582905000
Absenkkeil 1000kN
Painted blue Height: 18.2 - 27.2 cm
239
Supporting construction frame
Spindle strut T10 350/400cm
Article n°
Supporting construction frame | Single-sided formwork | Doka Wall Systems
[kg] Ring spanner 80
Article n°
3.8 582906000
Ringschlüssel 80
[kg] Intermediate flange for supp. constr. frame Zwischenflansch für Abstützbock
Galvanised Length: 62.4 cm
Bracing profile 2.95m
Supporting shoe WU16
8.3 582912000
Stützschuh WU16 Painted blue
Painted blue Length: 26.5 cm
Pressure shoe T7/T16 Platform profile 1.00m f. supp. constr. frame
10.7 582908000
Extension safety clamp for platform profile
1.7 582909000
Bühnenprofil 1,00m für Abstützbock Galvanised Length: 147.5 cm
Auszugsicherung für Bühnenprofil
16.2 582911000
Painted blue Length: 42.7 cm
42.5 582907000
Verschwertungsprofil 2,95m
Article n°
18.5 582913000
Druckschuh T7/T16
Painted blue Height: 72.5 cm
Multi-purpose waling SL-1 WU16 1.00m Multi-purpose waling SL-1 WU16 3.00m
Galvanised Length: 38.4 cm
Mehrzweckriegel SL-1
35.0 582877000 107.0 582888000
Painted blue
Handrail post 1.00m
3.8 584335000
Geländer 1,00m
Galvanised Length: 124 cm
Waling connector SL-1 WU16 0.75m
31.0 582886000
Heavy duty wheel 90kN
85.0 582921000
Riegelverbinder SL-1 WU16 0,75m Galvanised Length: 75 cm
T plate for supporting construction frame T-Lasche für Abstützbock
29.8 582910000
Schwerlastrad 90kN
Galvanised Height: 38 cm
Painted blue Length: 74.6 cm
Wheel connector F 2.40m
45.0 582922000
Radanschluss F 2,40m
Connecting pin SL-1 D32 100 Verbindungsbolzen SL-1 D32 100
Galvanised Length: 49 cm Width: 36 cm Height: 25 cm
1.0 582885000
Galvanised Length: 17 cm
Travelling profile bracket F 2.40m Verfahrprofil-Konsole F 2,40m
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
240
Galvanised Length: 28.5 cm Width: 22 cm Height: 48.2 cm
31.0 582924000
Doka Wall Systems | Single-sided formwork | Supporting construction frame
[kg]
Article n°
[kg]
Article n°
Doka Safety Systems
Supporting construction frame
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
241
Doka Floor Systems
Doka Floor Systems The easiest way to form floor-slabs
242
Doka Floor Systems
Doka Floor Systems
Innovative products, practice-oriented formwork solutions, continual advances and ongoing new product developments are what make these systems so unbeatable. Doka Floor Systems score for their diversity and their adaptability to widely differing construction tasks. No matter whether your slab areas are large or small, straightforward or complicated, with Doka you’ll always be working the right way – and the safe way, too.
Page Tableforms Dokamatic table
244
Dokaflex table
258
Shifting appliances for tables
266
Timber-beam floor formwork Dokaflex 30 tec
280
Doka Xtra
286
Dokaflex 1-2-4
296
243
Tableforms Dokamatic table | Tableforms | Doka Floor Systems
Dokamatic table The unbeatably fast tableform that adapts perfectly to any slab
Even complex layouts such as crescent-shaped flat-slab floors were also formed economically here, using standard tables and integrated filler zones. The key factors behind the success of this build were the high efficiency of the formwork solution, the extensive planning services and the just-in-time deliveries. “Rund Vier” office and commercial building, Vienna, Austria Contractors: JV of Dyckerhoff and Widmann
244
Doka Floor Systems | Tableforms | Dokamatic table
Large areas of slab in record time, even without crane assistance Fast forming of large areas of slab can be so easy, and so safe. With Dokamatic tables, fitting standard functional components couldn’t be simpler. And this system’s adaptability to widely differing requirements on the site is another factor making it so safe, fast and unbeatable.
Shorter repositioning times as tables can be repositioned with no need for a crane Cuts labour costs by at least 50 %, thanks to • vertical repositioning with no need for a crane, regardless of the wind conditions • horizontal repositioning by just 1 person • facility for travelling ready-assembled units
Greater safety around slab-edges to protect your employees The Dokamatic table gives you very many safety advantages, such as • integrable table platforms and drop-beam solutions Dokamatic table
• swivel-mounted props making it easy to move the tables out over parapets • higher load capacity due to rigid restraint of the props
Fast, easy adaptability to engineering and geometrical requirements The versatile Dokamatic table • enables infill zones to be integrated in the system, by using insertion beams • permits stepless transitioning to Dokaflex 1-2-4 • features easily relocatable swivel-heads • can be shored using either floor props, table frames or load-bearing towers
Faster construction workflows without the crane. With the Table Lifting System TLS, tableforms are brought up to the next floor at the push of a button.
Shifting appliances for tables
245
Dokamatic table | Tableforms | Doka Floor Systems
System System dimensions with a “grid” logic • 4 rentable standard formats, for optimum adaptation to the site situation • pre-assembled table grille for facing with any desired form-ply • on-time delivery of the ready-assembled Dokamatic tables to the site
Dokamatic swivel-head 40 • for rigid restraint of the floor prop • floor prop can be swivelled and locked in 1 working position and 2 idle positions, for safe, fast working • the tables can be optimally adapted to the structure simply by relocating the swivel-head in the steel primary beam
Strong system components for reducing your close-out costs With their field-proven “top” quality, the Doka formwork sheets, “H20 top” beams and “Eurex top” props ensure reliability and a long service life. Also, the flexurally rigid link with the tableform superstructure increases the load capacity of the “Eurex top” floor props by 10 kN – from 20 kN to 30 kN in the case of a “Eurex 20 top” prop, and from 30 kN to 40 kN in the case of a “Eurex 30 top” prop.
246
Doka Floor Systems | Tableforms | Dokamatic table
No Content !!
Adapting the props
Dokamatic table
Some simple steps and just a few blows of the hammer are all it takes to fix, change or remove the props. This integrated quick-acting prop connector thus makes it possible to adapt the tableforms very quickly to all different jobsite tasks.
Tilting back the props…
…including locking function
The tilting mechanism of the Dokamatic swivel-head 40 is very easy to operate.
To enable the tables to be lifted out across parapets and railings unobstructed, the props can be locked at an angle of either 75° (as shown in picture) or 90°.
247
Dokamatic table | Tableforms | Doka Floor Systems
Utilisation Integrated closures for reducing labour and equipment costs • Dokamatic insertion beams are used to integrate infill zones into the system. These insertion beams are pushed in or out as needed, and provide the support surfaces for the formwork sheeting. • The infill zones and the tables are repositioned together, which saves even more time.
Safety around floor-slab edges • The Dokamatic table platform is fixed directly onto the Dokamatic table, providing excellent workplace safety. • The fold-down railings on the Dokamatic table platform allow the Dokamatic table to be moved in under alreadycast slabs, and to be shifted in one piece with the platform • Safe platforms with widths of up to 1.50 m
No need for extra working and protection platforms The Dokamatic table platforms are located directly on the work-deck level and so ensure the very highest safety. This does away with the need for extra working and protection platforms on the building – and for the time-consuming erection work that this would require.
248
Doka Floor Systems | Tableforms | Dokamatic table
Height adjustment
Dokamatic table
For slab heights of up to approx. 7.00 m, the applicational range of the Dokamatic table can be extended by 1.50 m with the Dokamatic table frame. For slab heights of over 7.00 m, the Dokamatic table can easily be combined with the Load-bearing tower Staxo 40 or the Load-bearing tower Staxo 100.
Integral adaptation at slab-edges
Logistics and transport
• Simple, fast forming of downstand beams with the Dokamatic floor beam plate, for shifting the downstand-beam formwork and the Dokamatic table in one piece
Thanks to their compact design, the Dokamatic tables can be loaded onto a truck on top of one another in a very space-saving way, making for improved logistics and reduced shipping costs.
• The floor beam plate lets you form downstand beams of up to 60 cm in height (in a 5 cm grid)
249
Dokamatic table | Tableforms | Doka Floor Systems
References
With a slab area totalling nearly 80,000 m², “Siemens City Vienna” is currently the biggest construction project being undertaken for the Siemens Group anywhere in the world. For the extensive in-situ concreting works on this site, the contracting JV of Porr and Strabag is relying on the streamlined formwork technology of the Dokamatic table to achieve shorter repositioning times. Siemens City Vienna office location, Austria Contractors: JV of Porr and Strabag
250
Dokamatic table
Doka Floor Systems | Tableforms | Dokamatic table
Today’s widespread trend towards perfectly stage-managed “shopping worlds” is also impacting upon the architecture. With a gross floor area in excess of 95,000 m², the V´Arena (for which the Dokamatic table and Staxo load-bearing tower 100 systems from Doka are in use) is one of the biggest retail developments underway anywhere between Vienna and Munich. V´Arena shopping centre, Vöcklabruck, Austria Contractors: Strabag, Alpine, DYWIDAG
251
Dokamatic table | Tableforms | Doka Floor Systems
Article list [kg]
Article n°
515.0 656.0 480.0 600.0
586200000 586201000 586202000 586203000
[kg]
Article n°
Doka Floor table Dokamatic Systems
Dokamatic table 2.50x4.00m 21mm Dokamatic table 2.50x5.00m 21mm Dokamatic table 2.00x4.00m 21mm Dokamatic table 2.00x5.00m 21mm Dokamatic-Tisch
Doka floor prop Eurex 20 top 150
8.0 586096000
Doka floor prop Eurex 20 top 250
12.7 586086400
Doka floor prop Eurex 20 top 300
14.3 586087400
Doka floor prop Eurex 20 top 350
17.4 586088400
Doka floor prop Eurex 20 top 400
21.6 586089400
Doka floor prop Eurex 20 top 550
32.3 586090400
Doka floor prop Eurex 20 top 700
48.0 586139000
Height: 92 - 150 cm
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm Height: 298 - 550 cm
Dokamatic table 2.50x4.00m 27mm Dokamatic table 2.50x5.00m 27mm Dokamatic table 2.00x4.00m 27mm Dokamatic table 2.00x5.00m 27mm Dokamatic-Tisch
Doka formwork sheet 3-S plus 21mm 9.7/200cm Doka formwork sheet 3-S plus 21mm 9.7/250cm Doka formwork sheet 3-S plus 21mm 20/200cm Doka formwork sheet 3-S plus 21mm 20/250cm Doka-Schalungsplatte 3-S plus 21mm
Doka formwork sheet 3-S plus 27mm 9.7/200cm Doka formwork sheet 3-S plus 27mm 9.7/250cm Doka formwork sheet 3-S plus 27mm 20/200cm Doka formwork sheet 3-S plus 27mm 20/250cm Doka-Schalungsplatte 3-S plus 27mm
Dokamatic table grille 2.50x4.00m Dokamatic table grille 2.50x5.00m Dokamatic table grille 2.00x4.00m Dokamatic table grille 2.00x5.00m Dokamatic-Tischrost
252
560.0 685.0 522.0 625.0
586204000 586205000 586206000 586207000
2.0 2.5 4.2 5.3
186109000 186110000 186107000 186108000
Height: 383 - 700 cm Doka-Deckenstütze Eurex 20 top
Galvanised
Doka floor prop Eurex 20 250
12.9 586086000
Doka floor prop Eurex 20 300
15.3 586087000
Doka floor prop Eurex 20 350
17.8 586088000
Doka floor prop Eurex 20 400
22.2 586089000
Doka floor prop Eurex 20 550
34.6 586090000
Height: 152 - 250 cm
2.5 3.1 5.2 6.5
418.0 536.0 402.0 508.0
187052000 187053000 187050000 187051000
586208000 586209000 586210000 586211000
Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 297 - 550 cm Doka-Deckenstütze Eurex 20
Galvanised
Doka Floor Systems | Tableforms | Dokamatic table
[kg]
Article n°
Doka floor prop Eurex 30 top 250
12.8 586092400
Doka floor prop Eurex 30 top 300
16.4 586093400
Doka floor prop Eurex 30 top 350
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
Galvanised
[kg] Dokamatic swivel head 40
Article n°
17.1 586214000
Dokamatic-Schwenkkopf 40
Galvanised Length: 60 cm
Dokamatic table platform 1.00/2.00m Dokamatic table platform 1.00/2.50m Dokamatic-Tischbühne
92.0 586218000 103.0 586217000
Steel parts galvanised Timber parts varnished yellow Delivery condition: folded closed
14.8 586092000
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 30 450
29.2 586119000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Dokamatic platform bracket 1.00m Dokamatic-Bühnenkonsole 1,00m
19.5 586227000
Galvanised Length: 112 cm Height: 124 cm
Galvanised
Dokamatic platform extension 0.50/2.00m Dokamatic platform extension 0.50/2.50m Dokamatic-Bühnenverbreiterung
31.0 586220000 34.3 586219000
Steel parts galvanised Timber parts varnished yellow
Removable folding tripod 1.20m Stützbein 1,20m
20.7 586145000
Galvanised Height: 120 cm Delivery condition: folded closed
Dokamatic extension profile 0.50m
Dokamatic-Verbreiterungsprofil 0,50m Galvanised Length: 49 cm
Dokamatic platform profile 1.00m Dokamatic-Bühnenprofil 1,00m
6.0 586228000
11.0 586221000
Galvanised
Dokamatic table waling 12 4.00m Dokamatic table waling 12 5.00m Dokamatic-Tischriegel
122.5 586212000 154.0 586213000
Painted blue
Universal end-shutter support 30cm Universal-Abschalwinkel 30cm
1.0 586232000
Galvanised Height: 21 cm
253
Dokamatic table
Doka floor prop Eurex 30 250
Dokamatic table | Tableforms | Doka Floor Systems
[kg] Doka floor end-shutter clamp Doka-Deckenabschalklemme
Article n°
12.5 586239000
[kg] Dokamatic strut connection
Article n°
1.3 586215000
Dokamatic-Stützenanschluss
Galvanised Height: 26 cm
Galvanised Height: 137 cm
Dokamatic scaffold connection Dokamatic-Gerüstanschluss
3.4 586216000
Galvanised Height: 27 cm
End-shutter shoe
1.6 586257000
Abschalschuh
Galvanised Height: 13.5 cm
Dokamatic table frame 1.50m Dokamatic-Tischrahmen 1,50m
59.8 586224000
Galvanised
End-shutter tie rod 15.0 15-40cm Abschalanker 15,0 15-40cm
0.91 586258000
Galvanised Length: 55 cm
Doka mobile scaffold tower Z Doka-Fahrgerüst Z consisting of:
(A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K)
Attachable frame Z 1.00m Attachable frame Z 2.00m Railing frame Z 1.00m Handrail post Z 1.80m Platform Z with manhole flap 1.80m Platform Z without manhole flap 1.80m Cross board Z 1.35m Longitudinal board Z 1.80m Diagonal brace Z 2.00m Horizontal brace Z 1.80m Triangular bracket Z
6.7 11.3 4.1 6.5 17.5 17.0 4.0 5.1 3.0 2.8 5.3
586016000 586017000 586021000 586022000 586023000 586024000 586025000 586026000 586027000 586028000 586029000
Diagonal cross 9.150 Diagonal cross 9.200 Diagonal cross 9.250 Diagonal cross 9.300 Diagonal cross 12.150 Diagonal cross 12.200 Diagonal cross 18.100
5.2 6.6 8.0 9.0 5.7 6.9 6.1
Diagonalkreuz
582773000 582774000 582775000 582323000 582612000 582614000 582620000
Galvanised
(not illustrated)
(L) Guide roller Z D200mm (M) Entrance step bow Z (N) Platform diagonal strut Z
7.1 586030000 2.5 586031000 2.5 586032000
(not illustrated)
(O) Ballast Z
10.0 586033000
(not illustrated) D
Aluminium Follow the directions in the "Instructions for assembly and use"!
C
F
E
G
Dokamatic insertion beam 1.95m Dokamatic insertion beam 2.45m Dokamatic-Einschubträger
H
8.0 183054000 10.0 183045000
Varnished yellow
A I
B
J
M L
254
Supporting head H20 DF
0.77 586179000
Haltekopf H20 DF
Galvanised Length: 19 cm Width: 11 cm Height: 8 cm
Doka Floor Systems | Tableforms | Dokamatic table
[kg] Dokamatic table Staxo spindle connector
Staxo-Spindelanschluss Dokamatic-Tisch Galvanised Length: 20.7 cm
Dokamatic front wood strip 4x8cm 2.60m Dokamatic-Stirnholz 4x8cm 2,60m
Article n°
3.9 582347000
[kg] Dokamatic floor beam plate 60cm Dokamatic-Unterzugslasche 60cm
Article n°
21.1 586226000
Painted blue Height: 68 cm
4.2 183046000
Varnished yellow
Dokamatic end-shutter unit 50cm Dokamatic-Abschaleinheit 50cm
16.8 586223000
Galvanised Length: 71 cm Height: 57 cm
Spring locked connecting pin 16mm Federbolzen 16mm
0.25 582528000
Galvanised Length: 15 cm
Framax universal corner waling T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Framax-Eckklemmschiene
12.8 588151000
Painted blue Leg length: 60 cm
Grey
Dokamatic edge clamp 0.70m Dokamatic-Randklemme 0,70m
3.9 586222000
Adjustable waling extension FF20/50 Ausgleichslasche FF20/50
9.1 587532000
Painted blue Length: 87 cm
H20 screw-on bracket for formwork sheets Schalhaut-Schraubwinkel H20
Formwork element connector FF20/50 Z Elementverbinder FF20/50 Z
0.19 586256000
Galvanised Height: 19.2 cm
6.0 587533000
Painted blue Length: 55 cm
Lashing strap 5.00m Beam clamp Top50
1.2 580081000
Trägerklammer Top50
2.8 586018000
Zurrgurt 5,00m
Yellow
Painted blue Height: 15 cm
Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
Galvanised Length: 14 cm
Spring cotter 5mm
0.31 588631000
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
255
Dokamatic table
Galvanised
Dokamatic table | Tableforms | Doka Floor Systems
[kg] Plumbing strut 340 with prop head Justierstütze 340 mit Stützenkopf
Article n°
28.0 580671000
[kg] Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 190 - 341 cm
Article n°
Galvanised Length: 75.5 cm
Reversible ratchet 1/2"
0.73 580580000
Umschaltknarre 1/2"
Galvanised Length: 30 cm
Plumbing strut 540 with prop head Justierstütze 540 mit Stützenkopf
35.2 580673000
Galvanised Length: 309 - 550 cm
Box nut 30 1/2"
0.20 580575000
Stecknuss 30 1/2"
Shifting appliances for tables
You will find shifting appliances for tables in the section headed "Doka Floor Systems - Shifting appliances for tables".
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
Doka Safety Systems
Strip tensioner B 5.00m
3.5 580394000
Bandzwinge B 5,00m
Galvanised
Plastic mallet 4kg
4.5 586097000
Kunststoffhammer 4kg Blue Length: 110 cm
256
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Dokamatic table
Doka Floor Systems | Tableforms | Dokamatic table
257
Dokaflex table | Tableforms | Doka Floor Systems
Dokaflex table The tried-and-tested high-speed tableform
Dokaflex tables speed up construction workflows on large areas of slab. Even the most complex layouts, downstand beams and varying room heights can easily be dealt with by Dokaflex tables. Donaufelderstrasse housing development, Vienna, Austria Contractors: Swietelsky
258
Doka Floor Systems | Tableforms | Dokaflex table
The safe right choice for large areas of slab Dokaflex tables are easy and practical to set up and can be shifted and adapted very quickly. This makes them a cost-effective and efficient way of carrying out large-area slab projects. Of course, Dokaflex tables are fully combinable with Dokamatic tables.
Lower labour costs thanks to fast repositioning Speedy and efficient working, due to • ergonomical, safe operations using Doka shifting appliances • facility for travelling ready-assembled units • horizontal repositioning by just 1 person • craneless vertical repositioning using the Table Lifting System TLS
Perfect adaptability to any requirement Flexible, safe working because • ready-to-use tables are supplied for all structure geometries Dokaflex table
• infill zones can be integrated into the system by using insertion beams • can be combined with Dokamatic tables and Dokaflex 1-2-4 • the tableforms are designed for the very greatest stability and load capacity
Minimised close-out costs thanks to long service life The use of high-quality system components prolongs the service life of this sturdy table. This reduces close-out costs to a minimum.
Faster construction workflows without the crane. With the Table Lifting System TLS, tableforms are brought up to the next floor at the push of a button.
Shifting appliances for tables
259
Dokaflex table | Tableforms | Doka Floor Systems
References
The T-Center St. Marx complex in Vienna has a 21,000 m² footprint and was built with skewed floor-slabs and walls, nested building elements and distinctively styled concrete columns. 8350 m² of Dokaflex tables kept work moving ahead swiftly throughout this project. T-Center St. Marx, Austria Contractors: Porr, Wiener Betriebs- und Baugesellschaft
260
Dokaflex table
Doka Floor Systems | Tableforms | Dokaflex table
27,500 m² of office space completed were at the “Campus M” office and technology centre in Munich in only 14 months – using Dokaflex tables in various shapes and sizes, all the way up to exactly fitting trapeze-shaped custom formats. To deal with the varying gradients in the spiral ramp of the car-park, the Doka “Ready-to-Use” Service JIT-delivered exactly fitting Dokaflex tables to the site. “Campus M” office and technology centre, Germany Contractors: JV of Alpine-Mayreder and Habau
261
Dokaflex table | Tableforms | Doka Floor Systems
Article list [kg]
Article n°
385.0 470.0 317.0 386.0
586052000 586053000 586050000 586051000
[kg]
Article n°
Doka Floor Dokaflex table Systems
Dokaflex table 2.50x4.00m 21mm Dokaflex table 2.50x5.00m 21mm Dokaflex table 2.00x4.00m 21mm Dokaflex table 2.00x5.00m 21mm Dokaflex-Tisch
Doka floor prop Eurex 20 250
12.9 586086000
Doka floor prop Eurex 20 300
15.3 586087000
Doka floor prop Eurex 20 350
17.8 586088000
Doka floor prop Eurex 20 400
22.2 586089000
Doka floor prop Eurex 20 550
34.6 586090000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 297 - 550 cm Doka-Deckenstütze Eurex 20
Galvanised
Dokaflex table 2.50x4.00m 27mm Dokaflex table 2.50x5.00m 27mm Dokaflex table 2.00x4.00m 27mm Dokaflex table 2.00x5.00m 27mm Dokaflex-Tisch
Doka formwork sheet 3-S plus 27mm 9.7/200cm Doka formwork sheet 3-S plus 27mm 9.7/250cm Doka formwork sheet 3-S plus 27mm 20/200cm Doka formwork sheet 3-S plus 27mm 20/250cm Doka-Schalungsplatte 3-S plus 27mm
405.0 485.0 337.0 411.0
586054000 586055000 586056000 586057000
2.5 3.1 5.2 6.5
187052000 187053000 187050000 187051000
Doka floor prop Eurex 30 top 250
12.8 586092400
Doka floor prop Eurex 30 top 300
16.4 586093400
Doka floor prop Eurex 30 top 350
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Doka floor prop Eurex 20 top 150
8.0 586096000
Doka floor prop Eurex 20 top 250
12.7 586086400
Doka floor prop Eurex 20 top 300
14.3 586087400
Doka floor prop Eurex 20 top 350
17.4 586088400
Doka floor prop Eurex 20 top 400
21.6 586089400
Doka floor prop Eurex 20 top 550
32.3 586090400
Height: 92 - 150 cm
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 298 - 550 cm Doka-Deckenstütze Eurex 20 top
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
Galvanised
Galvanised
Doka floor prop Eurex 30 250
14.8 586092000
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 30 450
29.2 586119000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Galvanised
262
Doka Floor Systems | Tableforms | Dokaflex table
[kg] Dokamatic insertion beam 2.45m Dokamatic-Einschubträger 2,45m
Article n°
10.0 183045000
[kg] Universal end-shutter support 30cm Universal-Abschalwinkel 30cm
Article n°
1.0 586232000
Galvanised Height: 21 cm
Doka floor end-shutter clamp Table head 20
16.5 586085000
Tischkopf 20
Doka-Deckenabschalklemme
Galvanised Height: 137 cm
Galvanised Powder-coated, blue Length: 41 cm Width: 33 cm Height: 30 cm
Table head 30
12.5 586239000
18.5 586078000
Tischkopf 30
Galvanised Powder-coated, blue Length: 44 cm Width: 25 cm Height: 30 cm
Spring cotter 5mm
End-shutter shoe Galvanised Height: 13.5 cm
0.05 580204000
Federvorstecker 5mm
1.6 586257000
Abschalschuh
Galvanised Length: 13 cm
Abschalanker 15,0 15-40cm
Intermediate head DF
3.6 586058000
Zwischenkopf DF
Galvanised Length: 55 cm
Galvanised Length: 25 cm Width: 24 cm Height: 34 cm
H20 screw-on bracket for formwork sheets Connection unit DF 20/30
0.93 586084000
Spanneinheit DF 20/30
Schalhaut-Schraubwinkel H20
0.19 586256000
Galvanised Height: 19.2 cm
Galvanised Width: 15 cm Height: 12 cm Width-across: 19 mm
Supporting head H20 DF
0.91 586258000
0.77 586179000
Haltekopf H20 DF
Lashing strap 5.00m
Galvanised Length: 19 cm Width: 11 cm Height: 8 cm
Beam screw S 8/60
2.8 586018000
Zurrgurt 5,00m
Yellow
0.06 580116000
Riegelverschraubung S 8/60 Galvanised Length: 7 cm Width-across: 13 mm
Beam connection plate H20
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
Galvanised Length: 18 cm Follow fitting instructions!
0.08 586263000
Gurtverbinder H20
0.31 588631000
Galvanised Height: 8 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
263
Dokaflex table
End-shutter tie rod 15.0 15-40cm
Dokaflex table | Tableforms | Doka Floor Systems
[kg] Framax universal corner waling Framax-Eckklemmschiene
Article n°
12.8 588151000
[kg] Center bit DF 30
Article n°
0.10 586081000
Zentrumsbohrer DF 30
Painted blue Leg length: 60 cm
Retaining plate 15.0
1.8 586073000
Jochplatte 15,0
Strip tensioner B 5.00m
3.5 580394000
Bandzwinge B 5,00m Galvanised Length: 17 cm Width: 12 cm Height: 11 cm
Universal plug R20/25
Galvanised
0.003 588180000
Kombi Ankerstopfen R20/25
Plastic mallet 4kg
Blue Diameter: 3 cm
Handrail post T 1.80m
4.5 586097000
Kunststoffhammer 4kg Blue Length: 110 cm
17.7 584373000
Einschubgeländer T 1,80m Galvanised
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Nut for box spanner 19 1/2" L
0.16 580598000
Box nut 13 1/2"
0.06 580576000
Reversible ratchet 1/2"
0.73 580580000
Hülsennuss 19 1/2" L
Stecknuss 13 1/2"
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Length: 30 cm
Galvanised Width-across: 22 mm
T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Grey
264
Umschaltknarre 1/2"
Doka Floor Systems | Tableforms | Dokaflex table
[kg] Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Article n°
[kg]
Article n°
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Shifting appliances for tables
Dokaflex table
You will find shifting appliances for tables in the section headed "Doka Floor Systems - Shifting appliances for tables".
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
265
Shifting appliances for tables | Tableforms | Doka Floor Systems
Shifting appliances for tables Intelligent solutions for fast, safe repositioning
The Table Lifting System TLS is the easy, safe and quick way of transporting tableforms from one storey up to the next – or even next-but-one – storey. The electromechanical drive takes only 20 seconds to raise each tableform to the floor above. Ando Building, Basle, Switzerland Contractors: Implenia
266
Doka Floor Systems | Tableforms | Shifting appliances for tables
Horizontal and vertical repositioning made easy With Doka shifting appliances, slab-forming operations can be accomplished even faster. By making the crane unnecessary for both the horizontal and vertical repositioning operations, they simplify and optimise the logistics for the entire site, by doing away with unproductive (meaning costly) waiting times. The craneage saved here is then available for use elsewhere, which accelerates the entire site workflow. This saves on labour costs and boosts the contractors’ competitiveness.
Faster construction workflows with intelligent, crane-independent solutions Downtimes waiting for the crane are now a thing of the past • site logistics optimised by reducing the number of cranes and the crane times • self-climbing Table Lifting System works completely independently and with no need for the crane Shifting appliances for tables
• non-stop repositioning operations possible both when the TLS is stood on the ground and when it is used as a climbing unit suspended from the floor-slab
Superlative safety thanks to standardised safety systems The safest method of working, for all structures • ergonomic, safe working, from ground level • safe vertical repositioning of tables without crane assistance, up to wind speeds of 72 km/h • crew protected at all times by safety railings in place on all sides
Boosting efficiency with the innovative Doka shifting appliances Fast working always pays, and can slash costs at your site • the tables can be positioned quickly and easily, in a few simple steps • table areas of up to 12.5 m² can be shifted by just one man • craneless vertical repositioning of tableforms up to the next floor in only 20 seconds
267
Shifting appliances for tables | Tableforms | Doka Floor Systems
Horizontal repositioning DoKart The new DoKart is a “high-performer” whose innovative design perfectly suits it for the rough-and-tumble of everyday work on the site. • safe, ergonomically comfortable shifting of Doka tableforms by just one man • compact unit featuring high manoeuvrability for fast, easy workflows • high load capacity of 2000 kg • its big wheels, generous ground clearance and solid baseplate make it very rugged and reliable
The DoKart stands out for its great ease of operation, which ensures swift and easy workflows. • The DoKart’s ability to move 90° sideways, and to rotate around its centreline, cuts the distances it needs to cover and makes it even easier and quicker to travel the tables. • Work is speeded up still further by the high lifting speed. It takes only 1 second to raise the tableform 8 cm, taking it immediately to the right height for its next time of use.
Doka shifting trolley with attachable drive unit • For craneless horizontal repositioning of up to 12.5 m² of formwork, together with accessories, by only one man • With the Shifting trolley DF, Dokamatic tables can be hydraulically lowered and travelled, swiftly and safely. The clamp-on Attachable drive unit DF allows Dokamatic tables to be travelled with minimal effort.
268
Doka Floor Systems | Tableforms | Shifting appliances for tables
Vertical repositioning by crane Transport fork DM 1.5t (adjustable)
Shifting appliances for tables
The Transport fork DM 1.5t (adjustable), with a carrying capacity of 1500 kg, is supplied to the site folded closed. The 4 different forkwidth adjustments give the fork the ideal fit for any table format and usage situation. A latch-type anti-slide-off guard enables the jib to be moved in under the table without hindrance, and then ensures complete safety while the table is being lifted.
Dokamatic lifting strap…
…and loading platform
The Dokamatic lifting strap 13.00 m can be used for hoisting tableform superstructures and ready-to-use tables. The 13 m long strap is designed so that the crew can easily and safely fix it and detach it when working from ground level.
Using the Dokamatic lifting strap, the Dokamatic tables can be quickly lifted off the loading platform and up to the next level.
269
Shifting appliances for tables | Tableforms | Doka Floor Systems
Vertical repositioning without the crane Tables can be lifted from the first storey upwards The Table Lifting System TLS sets a brand-new benchmark for craneless vertical repositioning of tableforms. It makes a major contribution towards optimising the site logistics, and is designed to provide the very highest workplace safety. The Table Lifting System TLS can also be stood on the ground, making it possible to start repositioning tables right from the very first storey.
Fast repositioning, with no idle times The Table Lifting System TLS makes possible a non-stop repositioning cycle which accelerates the entire construction sequence • no more time lost waiting for the crane • repositioning can continue even in high winds of up to 72 km/h • the automatic operation mode allows efficient repositioning at the push of a button.
Extremely high safety in every phase of the work Proven site-hoist technology, with multiple safeguards, ensures the very highest safety during repositioning of the Doka tableforms. • TLS is installed on the structure by certified Doka site foremen • is robustly anchored to the structure • inward-opening landing-level safety gates and safety button on every storey • slip-proof, weathering-resistant platform decking for high stability
270
Doka Floor Systems | Tableforms | Shifting appliances for tables
No Content !!
Tables can be lifted on structures of any height
Shifting appliances for tables
Only a few simple steps are needed to modify the TLS and turn it into a climbing unit that is suspended from the floorslab. As soon as the TLS is hung into place and fixed, you can start work right away on lifting the Dokamatic tables up to the next floor. In this way, even the tallest buildings can be formed safely and quickly, independently of both wind conditions and crane availability, using Doka tableforms.
Speeds up the construction cycle The Table Lifting System TLS saves precious crane time. This frees up the crane for other work, in turn speeding up the whole progress of construction. What is more, by making the site independent of the wind conditions, the TLS makes a double contribution towards speeding up the work. Table repositioning operations can now continue undisturbed even in windier conditions – and still in complete safety. Manpower can be deployed very efficiently, and fast construction progress achieved, with the interoperable shifting appliances. These make it possible for the tableforms to be travelled to and from the TLS quickly and easily, by just one man.
Crane-independent raising of the Table Lifting System TLS As well as the crane-lifted version of the TLS that is suspended from the slab, the TLS can now also be used as a self-climbed system for any height of structure. The self-climbing solution delivers even more crane-time savings and safety on the site, as the TLS can now be “jumped” 100 % automatically. The selfclimbing TLS is the perfect add-on to Doka tableforms and to the protection screens at the slab-edges. This equipment line-up is the ideal slab formwork system for tall structures. Alternatively, where sufficient craneage is available the TLS can also be structure-guided and raised by crane – in any weather.
271
Shifting appliances for tables | Tableforms | Doka Floor Systems
References TLS assignment in Abu Dhabi. The Table Lifting System TLS is being used in the construction of the headquarters of the Abu Dhabi Securities Exchange in the United Arab Emirates. Due to the extremely large floor-area, totalling 285,000 m², and to the limited available craneage, four TLS units are in use here for moving the floor-slab formwork higher. Abu Dhabi Financial Centre, United Arab Emirates Contractors: Oger
The non-stop repositioning cycle, with no wasteful and costly downtimes, and the high standard of safety were the winning arguments that convinced main contractors Oger Abu Dhabi.
272
Doka Floor Systems | Tableforms | Shifting appliances for tables
The structure shell, with a gross floor area of around 65,000 m², was erected within the required deadline in only 9 months. A combination of Dokamatic tables and Dokaflex proved ideal as the floor-slab formwork. Construction operations were also speeded up by two new Table Lifting Systems TLS.
Shifting appliances for tables
MIRA district centre and shopping mall, München-Nordheide, Germany Contractors: Hochtief
On the Nordheide development, Hochtief used the system to supplement the cranes in critical areas where craneage was in short supply. Using the Table Lifting System TLS also allowed the cranes to be dismantled at an earlier stage. This made it possible to start forming the outdoor facilities sooner.
273
Shifting appliances for tables | Tableforms | Doka Floor Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Floor Shifting appliances Systemsfor tables
DoKart
1500.0 586265000
DoKart included in scope of supply:
(A) Brace stirrup 8
Stacking frame DF Galvanised Length: 134 cm Width: 130 cm Height: 75 cm
2.7 582751000
4 pcs. Galvanised Width: 19 cm Height: 46 cm Width-across: 30 mm Yellow Length: 173 cm Width: 133 cm Height: 154 - 324 cm Follow the directions in the "Operating Instructions"!
Extension set DoKart
Alu stacking frame DM 2.25m Alu-Aufsatzrahmen DM 2,25m
59.2 586238000
Aluminium Length: 187 cm Width: 128 cm Height: 225 cm Follow the directions in the "Operating Instructions"!
32.0 586266000
Auslegersatz DoKart
82.0 586079000
Aufsatzrahmen DF
Galvanised Follow the directions in the "Operating Instructions"!
Shifting trolley DF
566.0 586080000
Umsetzwagen DF included in scope of supply:
(A) Positioning lever for shifting trolley DF (B) Brace stirrup 8
6.0 586063000 2.7 582751000
4 pcs. Galvanised Width: 19 cm Height: 46 cm Width-across: 30 mm
Transport fork DM 1.5t adjustable Umsetzgabel DM 1,5t verstellbar
Galvanised Length: 634 cm Width: 245 cm Height: 507 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Galvanised Length: 181 cm Width: 130 cm Height: 154 - 303 cm Follow the directions in the "Operating Instructions"!
Vertical extension DM 1.5t 3.30m
Extension for shifting trolley DF Ausleger für Umsetzwagen DF
40.0 586015000
1134.0 586233000
Vertikalverlängerung DM 1,5t 3,30m Galvanised Height: 352 cm
240.0 586235000
Galvanised Length: 128.4 cm Follow the directions in the "Operating Instructions"!
Extension clamp H20 for fork 1.5t Aufsatzklemme H20 für Gabel 1,5t
Attachable drive unit DF Andockantrieb DF
274
Galvanised Height: 45 cm
512.0 586062000 Painted blue Length: 100 cm Width: 100 cm Height: 130 cm Follow the directions in the "Operating Instructions"!
4.5 586236000
Extension profile H20 for fork 1.5t Aufsatzprofil H20 für Gabel 1,5t
Galvanised Length: 83 cm Height: 52 cm
34.1 586237000
Doka Floor Systems | Tableforms | Shifting appliances for tables
[kg] Lifting extension bracket DF 1t Ausleger DF 1t
Article n°
263.0 586068000
[kg] Lifting hook DF
Lifting extension bracket DF 1.5t Ausleger DF 1,5t
475.0 586064000
Galvanised Length: 456 cm Width: 82 cm Height: 386 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Galvanised Length: 42 cm Width: 20 cm Height: 36 cm Follow the directions in the "Operating Instructions"!
Table Lifting System TLS Basic unit TLS
2336.0 586301000
Basiseinheit TLS
Length: 431 cm Width: 242 cm Height: 274 cm Follow the directions in the "Operating Instructions"!
220.0 586069000 245.0 586070000 274.0 586071000
Gabel DF 1t
Galvanised Length: 411 cm Height: 58 cm Follow the directions in the "Operating Instructions"!
Transport fork DF 1.5t 0.90m Transport fork DF 1.5t 1.30m Transport fork DF 1.5t 2.00m Gabel DF 1,5t
480.0 586065000 520.0 586066000 540.0 586067000
Galvanised Length: 638 cm Height: 71 cm Follow the directions in the "Operating Instructions"!
Dokamatic lifting strap 13.00m Dokamatic-Umsetzgurt 13,00m
10.5 586231000
Green Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
Lifting platform TLS centre 3.00x1.60m Hubbühne TLS mitte 3,00x1,60m
310.0 586307000
Height: 139 cm
Lifting platform TLS back 3.00x1.60m Hubbühne TLS hinten 3,00x1,60m
376.0 586308000
Height: 139 cm
Protective grating TLS 1.80m Schutzgitter TLS 1,80m
22.0 586334000
Galvanised Length: 141 cm Height: 121 cm
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Protecting metal sheet TLS right Protecting metal sheet TLS left Schutzblech TLS
12.0 586309000 12.0 586310000
Painted yellow Length: 85 cm Width: 32 cm Height: 73 cm
275
Shifting appliances for tables
Transport fork DF 1t 0.90m Transport fork DF 1t 1.30m Transport fork DF 1t 2.00m
5.9 586077000
Umsetzbügel DF
Galvanised Length: 336 cm Width: 66 cm Height: 309 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Article n°
Shifting appliances for tables | Tableforms | Doka Floor Systems
[kg] Lifting mast TLS 1.50m
Article n°
82.0 586328000
Hubmast TLS 1,50m
[kg] Lifting mast anchoring TLS strut Hubmastverankerung TLS Strebe
Abstützprofil TLS 5,15m
22.0 586331000
Galvanised Length: 153.5 cm Width: 50 cm
Galvanised
Supporting profile TLS 5.15m
Article n°
210.0 586317000
Galvanised
Lifting mast anchoring TLS mast connection
15.0 586332000
Base profile TLS 2.14m
28.0 586312000
Hubmastverankerung TLS Mastanschluss Galvanised Length: 72.6 cm Width: 66 cm
Bodenprofil TLS 2,14m
Galvanised
Pressure strut TLS 3.70m
70.0 586318000
Druckstrebe TLS 3,70m
Strut for base profile TLS
11.8 586313000
Strebe für Bodenprofil TLS
Galvanised Length: 257.3 cm
Galvanised
Beam for landing level safety gate TLS 0.40m Träger für Etagentüre TLS 0,40m
Floor support TLS 0.40m
Galvanised Length: 344 cm
39.0 586315000
Deckenauflager TLS 0,40m
35.0 586319000
Galvanised Length: 72.5 cm Width: 32.1 cm Height: 22.3 cm
Landing level safety gate TLS with handle Etagentüre TLS mit Griff
Adjusting device TLS
10.0 586336000
Justiereinheit TLS
Galvanised Length: 42 cm Width: 16 cm Height: 16 cm
Cable routing TLS
2.0 586333000
Kabelführung TLS
Galvanised Length: 35 cm
Lifting mast anchoring TLS cross bar 0.40m Hubmastverankerung TLS Traverse 0,40m Galvanised Length: 450 cm
276
92.0 586329000
Length: 153 cm Height: 126 cm
33.0 586321000
Doka Floor Systems | Tableforms | Shifting appliances for tables
[kg] Landing level safety gate TLS w. limit switch Etagentüre TLS mit Endschalter
Article n°
32.0 586322000
[kg] Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Length: 153 cm Height: 126 cm
Switch box TLS ground control
Schaltkasten TLS Bodensteuerung Height: 53 cm
Article n°
7.0 586323000
Tool box TLS
17.0 586337000
(A) Combination wrench 8
0.03 586343000
Werkzeugbox TLS consisting of: 2 pcs.
(B) Combination wrench 10
0.04 586342000
2 pcs.
(C) Combination wrench 13
0.06 586341000
2 pcs.
Switch box TLS landing level safety gate Schaltkasten TLS Etagentüre
7.0 586324000
(D) Combination wrench 17 (E) Combination wrench 19
Height: 53 cm
0.16 586340000
2 pcs.
0.14 582837000
2 pcs.
(F) Combination wrench 22
0.20 582838000
2 pcs.
0.25 582839000
2 pcs.
(H) Combination wrench 30
0.43 582840000
2 pcs.
Control cable TLS 20.0m blue Control cable TLS 20.0m red Steuerkabel TLS
Bar for limit switch TLS
4.0 586303000 4.0 586304000
5.0 586325000
Endschalterschiene TLS
Galvanised Length: 186 cm
(I) Reversible ratchet 3/4"
1.5 580894000
Galvanised Length: 50 cm
(J) Box nut 50 3/4" (K) Universal cone spanner 15.0/20.0
0.81 581449000 0.90 581448000
Galvanised Length: 9 cm Width-across: 50 mm
(L) Nut for box spanner 24 1/2" L (M) Extension 20cm 3/4" (N) Set of ball-head hexagon-socket screw keys (O) Slot-screw screwdriver 0.6x3.5 (P) Slot-screw screwdriver 1x5.5 (Q) Box spanners 1/2" set of 29
0.30 0.68 0.60 0.20 0.20 5.6
586364000 580683000 586346000 586344000 586366000 586345000
N P
O Q
Lifting cross bar TLS
M
19.0 586327000
Hebetraverse TLS
Galvanised Length: 76.5 cm
Torque wrench TLS 75-400Nm
Drehmomentschlüssel TLS 75-400Nm Length: 69 cm
Lifting beam TLS
2.2 586338000
62.0 586326000
Hebeträger TLS
Galvanised Length: 325 cm
277
Shifting appliances for tables
(G) Combination wrench 24
Shifting appliances for tables | Tableforms | Doka Floor Systems
[kg] Maintenance toolbox TLS
6.1 586369000
Wartungs-Werkzeugbox TLS consisting of:
(A) (B) (C) (D) (E) (F) (G) (H) (I)
Grease cartridge TLS Filling press TLS Thickness gauge set 0.05-1.00mm Pliers for external circlips 40-100mm Water pump nut pliers 250mm Screw dr. f. recessed-head scr. PZ 2 Combination wrench 14 Digital multimeter TLS Dummy plug TLS 4 poles
Brake-disc pull-off tool TLS D200 Scheibenabzieher TLS D200
Height: 27 cm Width-across: 22 mm
278
Article n°
0.46 0.93 0.06 0.32 0.32 0.15 0.09 0.22 0.04
586368000 586367000 586350000 586348000 586347000 586351000 586349000 586353000 586352000
4.3 586370000
[kg]
Article n°
Shifting appliances for tables
Doka Floor Systems | Tableforms | Shifting appliances for tables
279
Timber-beam floor formwork Dokaflex 30 tec | Timber-beam floor formwork | Doka Floor Systems
Dokaflex 30 tec Versatile hand-set system with exceptionally low costs-per-use
High-performance hand-set formwork system combining the new and innovative system component “Beam I tec 20” with the “Eurex 30 top” floor prop.
280
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 30 tec
High load capacity for materials-optimised use on the site By lowering your equipment and labour costs, this system will lead to a marked rise in your site’s cost-efficiency, ensuring low costs-per-use.
Labour-cost savings from new, intelligent system components Now you can cut costs even more! • up to 1/3 fewer floor props – meaning that much less time is needed for resetting and levelling • far fewer separate parts to be moved – so the workflows are even quicker
Reduced equipment costs thanks to maximum product optimisation These advantages are “tops”
Dokaflex 30 tec
• much lower equipment costs for the same commissioning quantity • longer service life and lower close-out costs with the new “I tec 20” beam and the “Eurex 30 top” floor prop
Perfect logistics thanks to optimised system development Benefit right across the board! • based on existing system components • reduced storage and transport volumes • multi-functional system components that can also be used in other Doka formwork solutions
Floor prop Eurex top
Beam I tec 20
281
Dokaflex 30 tec | Timber-beam floor formwork | Doka Floor Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Floor Dokaflex 30Systems tec
Doka floor prop Eurex 30 top 250
12.8 586092400
Doka floor prop Eurex 30 top 300
16.4 586093400
Doka floor prop Eurex 30 top 350
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
4-way head H20
4.0 586170000
Vierwegkopf H20
Galvanised Length: 25 cm Width: 20 cm Height: 33 cm
Spring locked connecting pin 16mm
Galvanised
Federbolzen 16mm
0.25 582528000
Galvanised Length: 15 cm
Supporting head H20 DF
0.77 586179000
Haltekopf H20 DF
Galvanised Length: 19 cm Width: 11 cm Height: 8 cm
U-head 12.5cm
1.2 586171000
Kopfgabel 12,5cm
Doka floor prop Eurex 30 250
14.8 586092000
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 30 450
29.2 586119000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Galvanised Height: 23 cm
Bracing clamp B
1.4 586195000
Verschwertungsklammer B Painted blue Length: 36 cm
Galvanised
Universal end-shutter support 30cm Universal-Abschalwinkel 30cm
1.0 586232000
Galvanised Height: 21 cm
Beam forming support 20 Removable folding tripod
15.6 586155000
Stützbein
6.9 586148000
Balkenzwinge 20
Galvanised Length: 30 cm Height: 35 cm
Galvanised Height: 100 cm Delivery condition: folded closed
Extension for beam forming support 60cm Balkenaufsatz 60cm
Galvanised
Lowering head H20
6.1 586174000
Absenkkopf H20
Galvanised Length: 25 cm Width: 20 cm Height: 38 cm
282
4.4 586149000
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 30 tec
[kg] Doka floor end-shutter clamp Doka-Deckenabschalklemme
Article n°
12.5 586239000
[kg] Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Height: 137 cm
Article n°
Galvanised Length: 75.5 cm
Alu beam fork H20
2.4 586182000
Alu-Trägergabel H20
Aluminium Powder-coated yellow Length: 176 cm
End-shutter shoe
1.6 586257000
Abschalschuh
Galvanised Height: 13.5 cm
Stripping lever DF 1.20m
2.7 586158000
Ausschalhebel DF 1,20m
Powder-coated yellow
End-shutter tie rod 15.0 15-40cm Abschalanker 15,0 15-40cm
0.91 586258000
Galvanised Length: 55 cm
44.0 586157000
Mobilgerüst DF
Lever extension DF 1.20m
2.0 586159000
Hebelverlängerung DF 1,20m Aluminium Length: 195 cm Width: 80 cm Height: 290 cm
Powder-coated yellow
Doka beam I tec 20 3.90m Doka beam I tec 20 4.50m Doka beam I tec 20 4.90m Doka beam I tec 20 5.90m
22.6 26.1 28.4 34.2
Doka-Träger I tec 20
Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
42.0 586151000
188007000 188008000 188009000 188010000
Varnished yellow Varnished grey
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Doka beam H20 top N 2.65m Doka beam H20 top N 2.90m Doka beam H20 top N 3.30m
13.8 189013000 15.0 189014000 17.0 189015000
Doka-Träger H20 top N
Varnished yellow
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Doka beam H20 top P 2.65m Doka beam H20 top P 2.90m Doka beam H20 top P 3.30m
14.3 189703000 15.6 189704000 17.7 189705000
Doka-Träger H20 top P
Varnished yellow
283
Dokaflex 30 tec
Wheel-around scaffold DF
Dokaflex 30 tec | Timber-beam floor formwork | Doka Floor Systems
[kg]
Article n°
Dokadur panel 21 200/50cm Dokadur panel 21 250/50cm Dokadur panel 21 200/50cm BS Dokadur panel 21 250/50cm BS
11.0 13.8 11.0 13.8
186083000 186081000 186083100 186081100
Dokadur panel 27 200/50cm Dokadur panel 27 250/50cm Dokadur panel 27 200/50cm BS Dokadur panel 27 250/50cm BS
13.5 16.9 13.5 16.9
187170000 187168000 187170100 187168100
Dokadur-Paneel 21
Dokadur-Paneel 27
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
284
[kg]
Article n°
Dokaflex 30 tec
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 30 tec
285
Doka Xtra | Timber-beam floor formwork | Doka Floor Systems
Doka Xtra The high-speed hand-set system with integrated “stripping logic”
Triangular building, site hemmed in by existing buildings, crane-time bottlenecks, tight deadlines – this was the “specification sheet” for the new office building for publishers Jahreszeiten Verlag in Hamburg. The hand-set Doka Xtra system, with its quick-lowering feature and clearly defined method of working right from the outset, was what decided the award of this contract. Office building for Jahreszeiten Verlag publishing house, Germany Contractors: Ed. Züblin
286
Doka Floor Systems | Timber-beam floor formwork | Doka Xtra
Straightforward, easy-to-understand workflow This value-for-money, high-speed system has a pre-defined stripping sequence which boosts efficiency and evens out the site crew’s workload. Any type of form-facing can be used, enabling all architectural wishes regarding the concrete surface to be met.
Reduced on-site formwork quantities thanks to its integrated “stripping-logic” Doka Xtra lets you work swiftly and economically, by: • allowing you to strike and re-use approx. 75 % of the equipment at an early stage • having only 4 different system components, all engineered to work together perfectly • low commissioning quantity and fast repositioning
Greater cost-efficiency because the system uses only a small number of – highly practical – different components Start benefiting from the advantages of Doka Xtra right away! • easy workflows • optimises the site crew’s workload • efficient site logistics (only 1 length of beam) Doka Xtra
Maximised number of re-use cycles thanks to the system’s high-grade components The well-proven Doka system components will give you very high numbers of repeat uses. High quality and durability are what make all the difference!
Floor prop Eurex top
The advantages are plain to see: the bulk of the formwork equipment can be struck ahead of time and re-used immediately in the next casting section.
Dokadur panel
Beam H20 top
287
Doka Xtra | Timber-beam floor formwork | Doka Floor Systems
System Doka Xtra head The Doka Xtra head has a quick-lowering function to minimise damage during stripping, and ensures absolute stability while the formwork is being struck.
Floor prop Eurex top The first-ever floor prop with an impact protector from Doka • unbeatably durable, due to impact protector • light and safe, thanks to new lightweight design • easy to back off, using integral quick-lowering feature • quick height adjustment, helped by numbered holes
Beam H20 top Up to 3 times the lifespan, thanks to built-in shock absorber • long life unmatched by any other beam, thanks to its integral shock absorber • fast, safe formwork set-up by referring to markings on the flanges • beams can be labelled – deters theft and uses the beams as an advertising vehicle • its innovative ends give it an innovative edge!
Dokadur panel Re-use cycles maximised by all-round edge protection • cuts costs with option to either purchase or rent • very high number of re-use cycles achieved by all-round edge protection and special surface sealing • can be turned into an advertising vehicle individally labelled with your name
288
Doka Floor Systems | Timber-beam floor formwork | Doka Xtra
Utilisation Early striking The Doka Xtra floor system permits early striking, and so speeds up the whole workflow.
Initial situation
Step 1
Step 2
Folding tripods and intermediate props are removed
Floor-slab formwork is lowered using the Doka Xtra head
Step 3
Step 4
The secondary beams, and most of the formwork sheets, are removed
The primary beams are removed. All the system components that have been removed are now available for forming a new section of floor-slab. The temporary reshoring stays in place until the concrete has attained sufficient load-bearing strength.
Integrated stripping-logic With its built-in quick-lowering function, the Xtra head makes forming operations even faster, with even less wear-and-tear on the equipment, and keeps the props – and thus the whole system – stable during formwork removal.
289
Doka Xtra
Floor slab with Doka Xtra formwork still in place
Doka Xtra | Timber-beam floor formwork | Doka Floor Systems
References Doka Xtra predefines the formwork-stripping operation, and needs only a small number of system components. This makes for uncluttered jobsites and fast, safe slab-forming. Rho housing development, Milan Contractors: P.F.B, Unionbau
A total of 18,500 m² of Doka Xtra floor-slab system was in action at this site. Doka handrail clamps were mounted to safeguard the slab-edges.
290
Doka Floor Systems | Timber-beam floor formwork | Doka Xtra
Fast, safe working – this is what sets Doka Xtra apart. Accommodation to columns or to the special geometry of individual rooms is achieved simply by telescoping the formwork beams.
Doka Xtra
Rho housing development, Milan Contractors: P.F.B, Unionbau
Doka Xtra reduces the commissioning quantities. Around 75 % of the equipment can be removed early and used in the next casting section. This cuts costs on the site.
291
Doka Xtra | Timber-beam floor formwork | Doka Floor Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Xtra Floor Systems
Doka floor prop Eurex 20 top 150
8.0 586096000
Doka floor prop Eurex 30 250
14.8 586092000
Doka floor prop Eurex 20 top 250
12.7 586086400
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 20 top 300
14.3 586087400
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 20 top 350
17.4 586088400
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 20 top 400
21.6 586089400
Doka floor prop Eurex 30 450
29.2 586119000
Doka floor prop Eurex 20 top 550
32.3 586090400
Height: 92 - 150 cm
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 298 - 550 cm Doka-Deckenstütze Eurex 20 top
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Galvanised Galvanised
Removable folding tripod Doka floor prop Eurex 20 250
12.9 586086000
Doka floor prop Eurex 20 300
15.3 586087000
Doka floor prop Eurex 20 350
17.8 586088000
Doka floor prop Eurex 20 400
22.2 586089000
Doka floor prop Eurex 20 550
34.6 586090000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 297 - 550 cm Doka-Deckenstütze Eurex 20
15.6 586155000
Stützbein
Galvanised Height: 100 cm Delivery condition: folded closed
Doka Xtra head
Galvanised
9.7 586108000
Doka Xtra-Kopf
Galvanised Height: 69 cm
Supporting head H20 DF
0.77 586179000
Haltekopf H20 DF
Doka floor prop Eurex 30 top 250
12.8 586092400
Doka floor prop Eurex 30 top 300
16.4 586093400
Doka floor prop Eurex 30 top 350
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
Galvanised Length: 19 cm Width: 11 cm Height: 8 cm
Spring locked connecting pin 16mm Federbolzen 16mm
Galvanised Length: 15 cm
Universal end-shutter support 30cm Universal-Abschalwinkel 30cm
1.0 586232000
Galvanised Height: 21 cm
Galvanised
Beam forming support 20
6.9 586148000
Balkenzwinge 20
Galvanised Length: 30 cm Height: 35 cm
292
0.25 582528000
Doka Floor Systems | Timber-beam floor formwork | Doka Xtra
[kg] Extension for beam forming support 60cm Balkenaufsatz 60cm
Article n°
4.4 586149000
[kg] Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised
Galvanised Length: 75.5 cm
Alu beam fork H20 Doka floor end-shutter clamp Doka-Deckenabschalklemme
Article n°
12.5 586239000
2.4 586182000
Alu-Trägergabel H20
Aluminium Powder-coated yellow Length: 176 cm
Galvanised Height: 137 cm
Stripping lever DF 1.20m
2.7 586158000
Ausschalhebel DF 1,20m
Powder-coated yellow
End-shutter shoe
1.6 586257000
Abschalschuh
Galvanised Height: 13.5 cm
Lever extension DF 1.20m Abschalanker 15,0 15-40cm
0.91 586258000
Powder-coated yellow
Galvanised Length: 55 cm
Doka beam H20 top N 2.65m Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m
13.8 189013000
Doka-Träger H20 top N 2,65m
Varnished yellow
Galvanised
Doka beam H20 top P 2.65m
14.3 189703000
Doka-Träger H20 top P 2,65m
Varnished yellow
Wheel-around scaffold DF
44.0 586157000
Mobilgerüst DF
Aluminium Length: 195 cm Width: 80 cm Height: 290 cm
Dokadur panel 21 200/50cm Dokadur panel 21 250/50cm Dokadur panel 21 200/50cm BS Dokadur panel 21 250/50cm BS
11.0 13.8 11.0 13.8
186083000 186081000 186083100 186081100
Dokadur panel 27 200/50cm Dokadur panel 27 250/50cm Dokadur panel 27 200/50cm BS Dokadur panel 27 250/50cm BS
13.5 16.9 13.5 16.9
187170000 187168000 187170100 187168100
Dokadur-Paneel 21
Dokadur-Paneel 27
293
Doka Xtra
End-shutter tie rod 15.0 15-40cm
2.0 586159000
Hebelverlängerung DF 1,20m
Doka Xtra | Timber-beam floor formwork | Doka Floor Systems
[kg] Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Article n°
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
294
[kg]
Article n°
Doka Xtra
Doka Floor Systems | Timber-beam floor formwork | Doka Xtra
295
Dokaflex 1-2-4 | Timber-beam floor formwork | Doka Floor Systems
Dokaflex 1-2-4 The fast, versatile hand-set system
The key factor behind the decision to use the hand-set Dokaflex 1-2-4 system on this residential and commercial development was the fast, safe way in which the system is set up, yet while offering complete flexibility. Residential and commercial development in Bratislava, Slovakia Contractors: Metrostav
296
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 1-2-4
No compromises when it comes to layout and concrete finish Dokaflex 1-2-4 is the fast, versatile floor-slab formwork for any desired layout. The quantities can easily be computed using a slide-rule, so no detailed formwork planning work is needed. Any type of form-facing can be used, enabling all architectural wishes regarding the concrete surface to be met.
Safe and fast to set up thanks to pre-defined system grid With Dokaflex 1-2-4, you’ll be working faster and more safely • only 2 different lengths of beam • the markings on the beams make it easy to set up, with an easy-to-see safety check
Adaptability to all layouts thanks to flexible grid The flexible floor-slab formwork grid for
Dokaflex 1-2-4
• any shape of layout – downstand beams and floor extensions can easily be solved “within the system” • perfect adaptability to columns and walls • optimising for different slab thickness • shoring filigree slabs
Highly cost-efficient thanks to the use of long-lived system components Designed for perfect interoperability, the system components give you • very high numbers of re-use cycles • reduced close-out costs • simplified site logistics • first-rate concrete surfaces
Floor prop Eurex top
Dokadur panel
Beam H20 top
297
Dokaflex 1-2-4 | Timber-beam floor formwork | Doka Floor Systems
System Floor prop Eurex top The first-ever floor prop with an impact protector from Doka • unbeatably durable, due to impact protector • light and safe, thanks to new lightweight design • easy to back off, using integral quick-lowering feature • quick height adjustment, helped by numbered holes
Beam H20 top Up to 3 times the lifespan, thanks to built-in shock absorber • long life unmatched by any other beam, thanks to its integral shock absorber • fast, safe formwork set-up by referring to markings on the flanges • beams can be labelled – deters theft and uses the beams as an advertising vehicle • its innovative ends give it an innovative edge!
Dokadur panel Re-use cycles maximised by all-round edge protection • cuts costs with option to either purchase or rent • very high number of re-use cycles achieved by all-round edge protection and special surface sealing • can be turned into an advertising vehicle individally labelled with your name
298
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 1-2-4
Utilisation Here’s how easily the system works 1-2-4 – these are the maximum spacings for setting-up Dokaflex 1-2-4. Triangular marks on the beams serve as a built-in “measuring tape”. • 1 mark = maximum spacing of secondary beams • 2 marks = maximum spacing of props
Dokaflex 1-2-4
• 4 marks = maximum spacing of primary beams
Doka floor end-shutter clamp
A clean solution for downstand beams
This quick and easy system solution for stop-ends now provides even greater safety at the edges of floor-slabs, and greater flexibility, with a choice of different attachment methods, types of stop-end and ways of safeguarding slab edges.
The Beam forming support 20 lets you quickly and accurately adjust the formwork for downstand beams, right down to the last millimetre. To do this, the Beam forming support is simply placed onto the secondary beams and tightened with a few blows of the hammer. This automatically pulls the side-formwork tight, for clean concrete faces.
299
Dokaflex 1-2-4 | Timber-beam floor formwork | Doka Floor Systems
References The floor slabs are being formed here by the site crew using the versatile, streamlined Dokaflex 1-2-4 hand-set system. This makes it a very simple, troublefree job to adapt the floor-slab formwork to the curving layout of the typical storeys. Residential complex in Liesing, Austria Contractors: Bilfinger Berger
Dokaflex 1-2-4 is easy to adapt to any layout, simply by telescoping the primary and secondary beams. In this way, even varying slab geometries can be cleanly formed, needing only comparatively small formwork commissioning quantities. Mosque in Duisburg, Germany Contractors: Kissel-Rapid
300
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 1-2-4
To construct the slab floors on this exclusive housing development, contractors Quintessa Construction opted for “materials-optimised” deployment of the versatile hand-set formwork Dokaflex 1-2-4, and are profiting from rapid construction progress and high surface quality.
Dokaflex 1-2-4
Housing development, California, USA Contractors: Quintessa Construction
Dokaflex 1-2-4 floor-slab formwork scores for being very quick and easy to set up, in a regular work sequence.
301
Dokaflex 1-2-4 | Timber-beam floor formwork | Doka Floor Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Floor Dokaflex 1-2-4 Systems
Doka floor prop Eurex 20 top 150
8.0 586096000
Doka floor prop Eurex 30 250
14.8 586092000
Doka floor prop Eurex 20 top 250
12.7 586086400
Doka floor prop Eurex 30 300
16.7 586093000
Doka floor prop Eurex 20 top 300
14.3 586087400
Doka floor prop Eurex 30 350
20.5 586094000
Doka floor prop Eurex 20 top 350
17.4 586088400
Doka floor prop Eurex 30 400
24.9 586095000
Doka floor prop Eurex 20 top 400
21.6 586089400
Doka floor prop Eurex 30 450
29.2 586119000
Doka floor prop Eurex 20 top 550
32.3 586090400
Height: 92 - 150 cm
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 298 - 550 cm Doka-Deckenstütze Eurex 20 top
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30
Galvanised Galvanised
Doka floor prop Eco 20 250
11.7 586134000
Doka floor prop Eco 20 300
13.0 586135000
Doka floor prop Eco 20 350
15.3 586136000
Doka floor prop Eco 20 400
19.1 586137000
Doka floor prop Eurex 20 250
12.9 586086000
Height: 152 - 250 cm
Doka floor prop Eurex 20 300
15.3 586087000
Height: 172 - 300 cm
Doka floor prop Eurex 20 350
17.8 586088000
Height: 197 - 350 cm
Doka floor prop Eurex 20 400
22.2 586089000
Height: 227 - 400 cm Doka-Deckenstütze Eco 20
Doka floor prop Eurex 20 550
34.6 586090000
Height: 152 - 250 cm Height: 172 - 300 cm Height: 197 - 350 cm Height: 227 - 400 cm
Height: 297 - 550 cm Doka-Deckenstütze Eurex 20
Galvanised
Galvanised
Doka floor prop Eurex 30 top 250
12.8 586092400
Doka floor prop Eurex 30 top 300
16.4 586093400
Doka floor prop Eurex 30 top 350
20.7 586094400
Doka floor prop Eurex 30 top 400
24.6 586095400
Doka floor prop Eurex 30 top 450
29.1 586119400
Height: 148 - 250 cm Height: 173 - 300 cm Height: 198 - 350 cm Height: 223 - 400 cm
Height: 248 - 450 cm Doka-Deckenstütze Eurex 30 top
Removable folding tripod
15.6 586155000
Stützbein
Galvanised Height: 100 cm Delivery condition: folded closed
Galvanised
Lowering head H20
6.1 586174000
Absenkkopf H20
Galvanised Length: 25 cm Width: 20 cm Height: 38 cm
302
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 1-2-4
[kg] 4-way head H20
Article n°
4.0 586170000
Vierwegkopf H20
[kg] Doka floor end-shutter clamp Doka-Deckenabschalklemme
Galvanised Length: 25 cm Width: 20 cm Height: 33 cm
Spring locked connecting pin 16mm Federbolzen 16mm
Article n°
12.5 586239000
Galvanised Height: 137 cm
0.25 582528000
Galvanised Length: 15 cm
End-shutter shoe 0.77 586179000
Haltekopf H20 DF
Galvanised Height: 13.5 cm
Galvanised Length: 19 cm Width: 11 cm Height: 8 cm
U-head 12.5cm
1.2 586171000
Kopfgabel 12,5cm
Universal-Abschalwinkel 30cm
Wheel-around scaffold DF
44.0 586157000
Mobilgerüst DF
Painted blue Length: 36 cm
Universal end-shutter support 30cm
0.91 586258000
Galvanised Length: 55 cm
1.4 586195000
Verschwertungsklammer B
End-shutter tie rod 15.0 15-40cm Abschalanker 15,0 15-40cm
Galvanised Height: 23 cm
Bracing clamp B
1.6 586257000
Abschalschuh
Aluminium Length: 195 cm Width: 80 cm Height: 290 cm
Dokaflex 1-2-4
Supporting head H20 DF
1.0 586232000
Galvanised Height: 21 cm
Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Beam forming support 20
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
6.9 586148000
Balkenzwinge 20
42.0 586151000
Galvanised Length: 30 cm Height: 35 cm
Extension for beam forming support 60cm Balkenaufsatz 60cm
Galvanised
4.4 586149000 Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
303
Dokaflex 1-2-4 | Timber-beam floor formwork | Doka Floor Systems
[kg] Universal dismantling tool
Article n°
3.7 582768000
Universal-Lösewerkzeug
[kg]
Doka Safety Systems
Galvanised Length: 75.5 cm You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Alu beam fork H20
2.4 586182000
Alu-Trägergabel H20
Aluminium Powder-coated yellow Length: 176 cm
Stripping lever DF 1.20m
2.7 586158000
Ausschalhebel DF 1,20m
Powder-coated yellow
Lever extension DF 1.20m
2.0 586159000
Hebelverlängerung DF 1,20m
Powder-coated yellow
Doka beam H20 top N 2.65m Doka beam H20 top N 3.90m
13.8 189013000 20.0 189017000
Doka-Träger H20 top N
Varnished yellow
Doka beam H20 top P 2.65m Doka beam H20 top P 3.90m
14.3 189703000 20.8 189707000
Doka-Träger H20 top P
Varnished yellow
Dokadur panel 21 200/50cm Dokadur panel 21 250/50cm Dokadur panel 21 200/50cm BS Dokadur panel 21 250/50cm BS
11.0 13.8 11.0 13.8
186083000 186081000 186083100 186081100
Dokadur panel 27 200/50cm Dokadur panel 27 250/50cm Dokadur panel 27 200/50cm BS Dokadur panel 27 250/50cm BS
13.5 16.9 13.5 16.9
187170000 187168000 187170100 187168100
Dokadur-Paneel 21
Dokadur-Paneel 27
304
Article n°
Dokaflex 1-2-4
Doka Floor Systems | Timber-beam floor formwork | Dokaflex 1-2-4
305
Doka Climbing Systems
Doka Climbing Systems The safe way to great heights
306
Doka Climbing Systems
Doka Climbing Systems
Doka’s modular system, based on its decades-long experience of widely differing construction tasks, means that it can deliver the right climbing technology solution across the entire architectural spectrum. For both crane-lifted and crane-independent solutions, the principle is always the same: The very highest standard of safety, combined with extremely high cost effectiveness and easy, safe handling. The right Doka solution is a key factor in obtaining a fast construction workflow.
Page Automatic climbing formwork Platform SCP
308
Automatic climbing formwork SKE
314
Automatic climbing formwork Xclimb 60
320
Cooling-tower formwork SK175
326
Crane-lifted climbing formwork Guided climbing formwork Xclimb 60
332
Climbing formwork MF 240
336
Climbing formwork 150 F
346
Climbing formwork K
352
Dam formwork
358
Shaft platform
366
307
Automatic climbing formwork Platform SCP | Automatic climbing formwork | Doka Climbing Systems
Platform SCP The self-climbing forming and working platform for high-rise cores
Topping out at an imposing 425 m, the Marina 101 high-rise tower is one of the most spectacular developments currently underway in Dubai. Once completed, the 101-storey tower will be one of the tallest residential buildings in the world. Marina 101, United Arab Emirates Contractors: TAV Construction
308
Doka Climbing Systems | Automatic climbing formwork | Platform SCP
Sophisticated technology for a professional construction workflow The Platform SCP was developed as an efficient and safe way to construct high-rise cores. It has room for all the site equipment needed, and is enclosed on all sides for safe, weathershielded working, even at very great heights. After pouring, the formwork for an entire storey is raised by powerful hydraulic cylinders from one casting section to the next.
Maximum safety for the entire site All operations can be carried out safely and quickly • on the SCP’s large, fully enclosed workspace • because the climbing scaffold is anchored to the concrete at all times • as the whole “site” is repositioned hydraulically with just one lift • with the integrable Ladder system XS
Rapid working in a controlled sequence Optimised formwork concept for fast forming-times Platform SCP
• formwork is suspended for quick and easy set-up and removal • all the formwork for an entire storey is raised independently of the crane • equipment containers, stair towers and concrete placing booms are all integrated • service loads can stay on the platforms while these are being raised
Superlative cost-efficiency for your high-rise core A cost-effective solution is ensured by
Ladder system XS
• the tie-rod-free suspension method for the system, based on re-useable steel boxes • the practice-oriented project planning provided by Doka Stair tower
Doka climbing technology
High Expectations
309
Platform SCP | Automatic climbing formwork | Doka Climbing Systems
System Core climbs ahead In this construction method, the core zone (lift shafts, stairwells) climbs ahead of the floor-slabs. “De-linking” the different building components in this way speeds up work, while providing excellent protection against the weather.
Slab and walls cast in one pour The characteristic feature of this method of construction is that the slab and walls are cast in one single pour – for maximum speed and economy.
Perfect logistics, complete ease of operation The high service loads that are possible on the Platform SCP save storage space on the site. For even faster cycle times, the reinforcement operations can also be carried out above the platform. The system makes it possible to suspend working platforms that reach deep down into the shafts, enabling the crew to start carrying out finishing-jobs while the concreting works are still underway.
310
Doka Climbing Systems | Automatic climbing formwork | Platform SCP
Utilisation The forming machine (A) Openings as needed in the working platforms, for equipment-handling or for installing stairways (B) Safe access routes, thanks to the flexibility with which stair towers can be used (C) Equipment and tool containers can easily be installed. This optimises the infrastructure. (D) A concrete placing boom can be integrated into the formwork concept, and raised with the Platform SCP.
Platform SCP
No Content !!
Upwards at the push of a button
Ample space and safety, at any height
Together with the working platform, timber-beam or framed formworks are raised to the next casting section in a single lift, by powerful hydraulic cylinders.
The generous striking-distances and ingenious platform system permit “Safe. Fast. Efficient.” working, just like on the ground.
311
Platform SCP | Automatic climbing formwork | Doka Climbing Systems
References The fully railed-in platform provides the very maximum in safety, even right in the middle of the city. “Mediapark Köln”, Cologne, Germany Contractors: Hochtief, Heitkamp
Stringent requirements were made in respect of this structure, and space at the city-centre site in Dortmund was extremely limited. Both sets of problems were solved perfectly by using two SCP platforms. RWE GAS Tower, Germany Contractors: Heijmans Oevermann
312
Doka Climbing Systems | Automatic climbing formwork | Platform SCP
The Saturn Tower’s structure shell is already a most imposing sight. Many different Doka formwork systems are in action here, among them the innovative Platform SCP for the central shaft core of the building.
Platform SCP
Saturn Tower, Austria Contractors: “ARGE Saturn Tower” consortium
The Platform SCP’s high-load storage area and integrated equipment and tool containers accelerate the construction workflow very significantly. “Business Tower Nürnberg”, Germany Contractors: “ARGE Nürnberger Versicherung” consortium
313
Automatic climbing formwork SKE | Automatic climbing formwork | Doka Climbing Systems
Automatic climbing formwork SKE The crane-independent climbing formwork for structures of any shape and height
The 227 m tall in-situ concrete core and the punctuated facade of the Prime Tower are both being built at record speed using the efficient Automatic climbing formwork SKE. Doka equipment is also in service for the cast-in-place concrete floor slabs. Prime Tower, Dubai Contractors: Al Ashram Contracting
314
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE
Fast cycle times, huge flexibility and utmost cost-efficiency For every type of structure, the modular design concept of the crane-independent Automatic climbing formwork SKE provides an efficient solution for achieving weatherindependent construction workflow and maximum crew safety.
Maximum safety in all phases of the work The safe way to climb to great heights, because • the climbing scaffolds are anchored to the concrete at all times • of the wide working platforms, enclosed on all sides • the climbing operations can be managed with complete precision using radio remote control
Automatic climbing formwork SKE
• the Ladder system XS or a stair tower can be integrated to provide safe workplace access
The very highest cost-efficiency for your project A cost-effective solution is ensured by • the easy way in which the system accommodates varying structure geometries and inclinations • the practice-oriented project planning provided by Doka
Rapid working in a controlled sequence Flexible cycling • as even large formwork gangs can be raised in tandem, independently of the crane • even in windier conditions
Ladder system XS
• because service loads can stay on the platforms while these are being raised • because it is possible to integrate concrete placing booms
Stair tower
Doka climbing technology
High Expectations
315
Automatic climbing formwork SKE | Automatic climbing formwork | Doka Climbing Systems
System
Automatic climbing formwork SKE50 plus
Automatic climbing formwork SKE100
Automatic climbing formwork SKE50 plus, with a load capacity of 5 tonnes per bracket, is the ideal solution for many different types of climbing assignment. This novel, innovative system is the perfect way of forming high-rise cores, bridge piers and pylons, and also building-facades.
The high load capacity of 10 tonnes per bracket and the tall formwork-platform scaffolds allow work to proceed simultaneously, making it possible to “de-link” the forming and rebar operations. The brackets are extremely strong, which permits wide, variable spacing and also makes it possible to lift concrete placing booms.
Safe choice, right system The Automatic climbing formwork SKE is definitely the “safe” choice of system. Its wide, fully railed-in working platforms, which can be completely enclosed over the entire area if desired, give your site the ultimate in safety.
316
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE
Utilisation The self-climbing shaft formwork
20 automatic climbers at the push of a button Each hydraulic unit can simultaneously raise as many as 20 automatic climbers up to the next casting section.
317
Automatic climbing formwork SKE
The “Automatic climbing formwork SKE50 plus shaft” system gives a huge boost to the speed of craneless forming operations on insideshafts. Optimum adaptability, straightforward formwork operation, combinability with the Stripping corner I, re-useable anchoring components – these are just some of the many advantages of this novel system.
Automatic climbing formwork SKE | Automatic climbing formwork | Doka Climbing Systems
References This cable-stayed bridge over the River Suir is 465 m long and has a 108 m high pylon and a 400 m span, making it the biggest bridge of its type in all of Ireland. River Suir Bridge, Ireland Contractors: Dragados
Inspired by an Arabian desert flower, the architectural form of the world’s tallest building meant that the formwork needed to be highly adaptable. In turn, the extremely tight construction schedule necessitated a perfectly thought-out utilisation plan. Burj Khalifa, United Arab Emirates Contractors: Samsung, Besix and Arabtec
318
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE
For the first time, a cablestayed bridge has broken the magic 1000 m span barrier, with a 306 m tall pylon.
Automatic climbing formwork SKE
Sutong ChangJiang Highway Bridge, China Contractors: CHEC Construction
Soaring to 160 m above Milan, the two high-rise towers of the administrative seat of the Lombardy regional government are the tallest buildings in Italy. Altra Sede di Regione Lombardia, Italy Contractors: Consorzio Torre
319
Automatic climbing formwork Xclimb 60 | Automatic climbing formwork | Doka Climbing Systems
Automatic climbing formwork Xclimb 60 The all-round self-climbing system for use in building construction
The in-situ concrete core of the 240 m tall Ocean Financial Centre is being “climbed” using the high-performing Xclimb 60 automatic climbing formwork, in a five-day cycle. To ensure the very greatest workplace safety during the slab-forming operations, the top four storey levels at any one time are enclosed by the self-climbing Xclimb 60 protection screen. Ocean Financial Centre, Singapore Contractors: Obayashi Corporation, Woh Hup
320
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60
Self-climbing, modular and versatile Automatic climbing formwork Xclimb 60 is a dual-use crane-lifted or self-climbing system that can be cost-effectively deployed anywhere in the high-rise construction field.
Huge flexibility thanks to the innovative, modular system Benefit from the system’s multi-use capability • for walls, for facades or as a protection screen • and from the option of lifting the system either by crane or as a self-climbed system using manually relocatable hydraulic lifting appliances
Automatic climbing formwork Xclimb 60
• variable platforms that allow perfect adaptation to the geometry of the structure
High standard of safety for your site crew Safety is “built in” to all phases of the work, as • the guided repositioning operation is independent of the weather • enclosures can easily be constructed with materials that are adapted to the requirements • the platforms are sized to the ideal width for practical working • the Ladder system XS can easily be integrated
Simple modular design concept based on a practical “construction-kit” system Save time and money because of • the high degree of pre-assembly • the way the system simplifies planning, utilisation and handling
Ladder system XS
• the facility for leaving service loads in place on the platforms even while these are being repositioned
Protection screen Xclimb 60
Doka climbing technology
High Expectations
321
Automatic climbing formwork Xclimb 60 | Automatic climbing formwork | Doka Climbing Systems
System
Automatic climbing formwork Xclimb 60
Simply self-climbing
The system is self-climbed up to the next casting section using portable hydraulic components. Finishing-work platforms can be attached anywhere on the scaffold.
Lightweight, quick-mount hydraulic cylinders with a lifting mechanism reliably push up the entire climbing scaffold – complete with the formwork – until the next climbing cam is pushed past the “Guiding shoe” and automatically latches into it. To do this, each hydraulic cylinder is simply placed onto the respective “Guiding shoe”.
Outstanding workplace safety Integrable ladderways and manholes provide safe access routes between the working platforms. When designing climbing formwork solutions, the Doka planning professionals integrate all safety accessories, tailoring them to the construction project in hand.
322
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60
Utilisation Easy to get right first time
Protection screen Xclimb 60 The full-area enclosure around the uppermost levels of the building enables all work to be carried out in complete safety, protected from all climatic influences. An integrable loading platform, or the Table Lifting System TLS, makes easy and safe work of repositioning floor-slab formwork, tools and other materials.
323
Automatic climbing formwork Xclimb 60
The Xclimb 60 system is so user-friendly that after a brief familiarisation phase supervised by a Doka site foreman, the site crew quickly “get it” and can then work entirely unaided.
Automatic climbing formwork Xclimb 60 | Automatic climbing formwork | Doka Climbing Systems
References Yet another building on which Automatic climbing formwork Xclimb 60 ensured the utmost safety and straightforward, fast working, for rapid construction progress. Multipurpose building for Severn Trent Water, Great Britain Contractors: Concentral
This new combined-cycle gas turbine (CCGT) plant was built to help supply Austria’s electricity needs with minimum environmental impact. The CIP walls of the 48 m high tower were formed using the innovative Automatic climbing formwork Xclimb 60. Timelkam combined-cycle gas turbine power plant, Austria Contractors: Alpine Mayreder, Porr
324
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60
The refuse and sewagesludge incineration plant in Krefeld is being enlarged with a new refuse and slag bunker and a 53 m tall stairwell. To ensure reliable forming of the 4 m high casting cycles in a weekly rhythm, Automatic climbing formwork Xclimb 60 was used in conjunction with shaft platforms in the stairwell core.
Automatic climbing formwork Xclimb 60
Enlargement of refuse and sewage-sludge incineration plant in Krefeld, Germany Contractors: Rostek & Pesch
The site crews of Sunway Construction are forming the cores of two 40-storey office buildings – 4G10 and 4G11 – using the safe, versatile Automatic climbing formwork Xclimb 60. The cast-in-place concrete floor slabs and a large number of drop beams are being constructed using adaptable, large-area Dokamatic tables. Government buildings 4G10 and 4G11, Malaysia Contractors: Sunway Construction
325
Cooling tower formwork SK175 | Automatic climbing formwork | Doka Climbing Systems
Cooling-tower formwork SK175 The self-climbing formwork for cooling towers
An overall height of 117 m, wall thicknesses of between 18 cm and 125 cm, and 62 casting steps – these are the impressive key data of this colossal natural draught cooling tower in Damāvand. To counteract the very low winter temperatures in this region, the formwork was fitted with insulation. Damāvand cooling tower, Iran Contractors: Tosee Siloha Co.
326
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175
For building cooling towers, performance is what counts This cooling-tower formwork is a fully mechanised, self-climbing large-area formwork system. It maximises rationalisation and minimises manual labour – after a short familiarisation period, the crew will soon be accomplishing the casting sections in a 1-day cycle.
Maximum safety for your site crew Safety in all phases of the work • even at great heights in strong winds, as the formwork is always firmly attached to the structure • by means of telescopic working platforms – these are railed-in and gapless even while climbing is in progress, and so provide a safe working environment at all times • thanks to optimally adapted platform widths and integrated ladder systems Cooling tower formwork SK175
Rapid working in a controlled sequence Optimised formwork concept for fast forming-times • large-area formwork gangs, making the system much simpler to operate and clean • inclination of whole scaffold can be adjusted from one central spindle • built-in reinforcement holders in the scaffold, making it a quick and easy job to place the reinforcement
Very high cost-efficiency for your cooling tower A cost-effective solution is ensured by • all-round platforms that permit “de-linkage” of operational sequences • very small number of form-tie points per square metre • consistently high concrete quality, thanks to the steel form-facing • large-area formwork gangs for a casting-section height of 1.5 m • the practice-oriented project planning provided by Doka
Doka climbing technology
327
Cooling tower formwork SK175 | Automatic climbing formwork | Doka Climbing Systems
System Cooling-tower formwork SK175 This special cooling-tower formwork for hyperparaboloidal natural draught cooling towers was developed in the course of several years’ work on the basis of the Automatic climber SK175, and has been repeatedly field-proven. This development embodies the “state of the art” of European technology in the field.
The platform system for a streamlined workflow The permanently mounted telescopic platforms ensure that there is an uninterrupted circumferential walkway all the way around the cooling tower at all times, even during the entire climbing operation. This detail makes a crucial contribution towards safe – and thus troublefree – working.
328
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175
Perfect adaptability
Placing the reinforcement
Working from the platform system, which can be tilted by turning just one central spindle, the crew can easily adjust the formwork up to a 22-degree angle of inclination, by turning the adjusting spindle. The formwork can negotiate vertical curves without difficulty, down to a minimum radius of 70 m.
Working from the top platform, the reinforcement can be placed a day in advance. The vertical reinforcement rods are for 2 casting steps at a time. The reinforcements are held in position during placement by reinforcement holders mounted on the scaffold.
A well thought-out system The 4 platforms make it possible to “de-link” the operational sequences from one another, and are used for carrying out different tasks.
Electromechanical lifting systems are used to raise the formwork, making it completely independent of the crane.
Steel formwork elements with compensating elements on both sides ensure constant concreting results all the way through to the very last casting section.
To allow the formwork elements to be quickly cleaned, they are designed so that they can be rolled back approx. 60 cm from the concrete. The formwork is struck with the aid of a spindle, and rolled back by hand, on rollers.
329
Cooling tower formwork SK175
Utilisation
Cooling tower formwork SK175 | Automatic climbing formwork | Doka Climbing Systems
References
The project at the giant Lingen power-station complex was to build a new cooling tower with a 90 m diameter at the bottom of the shell, tapering to approx. 54 m by the waist of the tower. 90 climbing units of Cooling-tower formwork SK175 were in action during the construction operations, reaching the final shell height of 123 m in 75 casting steps. Cooling tower at Lingen power station, Germany Contractors: Ed. Züblin
330
Cooling tower formwork SK175
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175
The cooling tower in Kalinin was built easily and efficiently, in 1-day cycles, using Cooling-tower formwork SK175. This system dealt ideally with the different inclinations and diameters encountered here. Cooling tower in Kalinin, Russia Contractors: Rosenergo
331
Crane-lifted climbing formwork Guided climbing formwork Xclimb 60 | Crane-lifted climbing formwork | Doka Climbing Systems
Guided climbing formwork Xclimb 60 The structure-attached crane-lifted climbing system
To be sure of staying on schedule with the 60 m tall in-situ concrete core even in poor weather conditions, contractors Ed. Züblin AG relied on Guided climbing formwork Xclimb 60. Jülich solar power station, Germany Contractors: Ed. Züblin
332
Doka Climbing Systems | Crane-lifted climbing formwork | Guided climbing formwork Xclimb 60
The safe way up to the next casting section, in just one lift The Guided climbing formwork Xclimb 60 is a system in which the entire unit is structure-guided at all times, even while being repositioned. Even in windy conditions, an entire screen unit is repositioned safely and easily in one single lift.
The ultimate in flexibility thanks to the innovative, modular system Benefit from the system’s multi-use capability • for walls, for facades or as a protection screen • variable platforms that allow perfect adaptation to the geometry of the structure
Guided climbing formwork Xclimb 60
• finishing-work platforms can be attached anywhere on the profile
High standard of safety for your site crew Safety is “built in” to all phases of the work, as • the guided repositioning operation is independent of the weather • enclosures can easily be constructed with materials that are adapted to the requirements • the platforms are sized to the ideal width for practical working • the Ladder system XS can easily be integrated
Simple modular design concept based on a practical “construction-kit” system Save time and money because of • the high degree of pre-assembly
Ladder system XS
• the way the system simplifies planning, utilisation and handling • the facility for leaving service loads in place on the platforms even while these are being repositioned Protection screen Xclimb 60
Doka climbing technology
High Expectations
333
Guided climbing formwork Xclimb 60 | Crane-lifted climbing formwork | Doka Climbing Systems
System
Guided climbing formwork Xclimb 60
A sturdy, safe connection
One crane-lift cycle is all it takes to raise the formwork unit, swiftly and independently of the wind conditions, as it is guided up the side of the structure.
The formwork unit is permanently attached to the structure by the vertical profile and the guiding shoe, in every phase of every cycle. During the lifting operation the vertical profile is safely guided in a minimum of 2 guiding shoes.
Outstanding workplace safety Integrable ladderways and manholes provide safe access routes between the working platforms. When designing climbing formwork solutions, the Doka planning professionals integrate all safety accessories, tailoring them to the construction project in hand.
334
Doka Climbing Systems | Crane-lifted climbing formwork | Guided climbing formwork Xclimb 60
Utilisation Easy to get right first time
Protection screen Xclimb 60 The full-area enclosure around the uppermost levels of the building enables all work to be carried out in complete safety, protected from all climatic influences. An integrable loading platform, or the Table Lifting System TLS, makes easy and safe work of repositioning floor-slab formwork, tools and other materials.
335
Guided climbing formwork Xclimb 60
The Xclimb 60 system is so user-friendly that after a brief familiarisation phase supervised by a Doka site foreman, the site crew quickly “get it” and can then work entirely unaided.
Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
Climbing formwork MF 240 Crane-jumped formwork for structures of any shape and inclination
The great adaptability of the Climbing formwork MF 240 enabled the attractive shape of the five double piers to be formed both perfectly and highly economically. The 485 m long bridge superstructure was formed using Large-area formwork Top 50 on falsework and on a cantilever forming traveller. Friedetal bridge near Sollstedt, Germany Contractors: Gerdum & Breuer
336
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240
Very great flexibility yet regular working cycles Climbing formwork MF240 permits controlled, regular working cycles on all tall structures. It is extremely easy to set up, and can be tailored to meet a wide range of different requirements.
High flexibility meaning optimum adaptation to any construction project, with only a few individual components By turning pressure spindles, the Climbing formwork MF240 can be accommodated perfectly to structures whose inclination varies from one cycle to the next.
Optimum safety for your site crew
Climbing formwork MF240
reliably safeguarded workspaces and workplace access routes ensured by • the 2.40 m wide work-platforms, with plenty of space for fast, safe working • the integrable Ladder system XS
Easy to operate saving you time and money Makes the forming operations swift and efficient, as • the formwork is easy to set up and remove using a travelling unit, with no need for a crane • the formwork and scaffold are shifted together, in one piece • the formwork can be adjusted both precisely and quickly in all directions
Ladder system XS
Doka climbing technology
High Expectations
337
Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
System
Climbing formwork MF 240 The formwork and climbing scaffold are linked together as a single unit which can be repositioned in just one crane-lift. On structures with straight walls, Climbing formwork MF 240 permits casting sections that are up to 6 m high.
338
Climbing formwork MF 240 gets structures up to form Even very complex structural shapes can be constructed using Climbing formwork MF 240. Thanks to its practical constructional design, Climbing formwork MF 240 can be adapted to highly diverse requirements, easily and very flexibly.
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240
Utilisation Safe working
In service worldwide. With worldwide success. Based on Doka’s decadeslong experience of widely differing construction tasks, in many different countries, Climbing formwork MF 240 is the crane-jumped solution that covers the entire architectural spectrum.
339
Climbing formwork MF240
Stringent requirements regarding workplace safety call for outstandingly good formwork. The 2.40 m wide platforms on Climbing formwork MF 240 provide plenty of space for fast, safe working and make a fully railed-in platform system.
Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
References The conical-cylindrical foundations for the offshore wind turbines on Belgium’s Thornton Bank were pre-cast highly efficiently on land, using Climbing formwork MF 240. After completion, the hollowbodied structures were towed to the erection location and lowered onto the seabed at a depth of down to 27 m. Thornton Bank wind turbines, Belgium Contractors: M.B.G.
Built to a design by architects KSP Engel & Zimmermann, this high-rise complex in Frankfurt constitutes a networked unit of four separate parts. Soaring above the rooftops of Frankfurt, its two towers, one of 135 m and the other of 99 m, were built using climbing formwork. Frankfurt Hoch 4, Germany Contractors: Ed. Züblin
340
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240
A truly superlative football arena, with space for 68,000 spectators, is rising beside the ocean in Cape Town: the Greenpoint Stadium. To construct the spectator terraces, the contracting JV opted for efficient formwork solutions from Doka.
Climbing formwork MF240
Greenpoint Stadium, South Africa Contractors: Murray & Roberts, WBHO
The extremely fast cycle times made possible by an ingenious formwork concept helped complete this landmark building – right next-door to Vienna’s UNOCity complex – on time. With its spacious office facilities, the Tech Gate Tower is now home to more than 30 hightech companies. Tech Gate Tower Vienna, Austria Contractors: Strabag
341
Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Climbing Climbing formwork Systems MF240
Horizontal profile MF with handrail post Horizontalprofil MF mit Geländer
88.5 581618000
Pressure spindle MF240 Galvanised Height: 166 - 226 cm
Galvanised Length: 251 cm Height: 155 cm
Vertical profile MF80
26.0 580680000
Druckspindel MF240
44.0 580652000
Vertikalprofil MF80
Galvanised Height: 213 cm
Travelling gear MF
32.3 580656000
Fahrwerk MF
Galvanised Length: 128 cm Height: 22 cm
Plumbing spindle MF 3.00m
23.0 580657000
Einrichtspindel MF 3,00m
Length: 166-229 cm
Vertical profile MF160
90.5 580660000
Vertikalprofil MF160
Galvanised Height: 208 cm
Plumbing spindle MF 4.50m
46.0 580664000
Einrichtspindel MF 4,50m
Galvanised Length: 262 - 345 cm
Pressure strut MF long
24.7 580653000
Druckstrebe MF lang
Galvanised Length: 252.9 cm
Vertical waling MF 3.00m
76.8 580658000
Fahrriegel MF 3,00m
Pressure strut MF short
16.3 580654000
Druckstrebe MF kurz
Galvanised Length: 183.2 cm
342
Galvanised
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240
[kg] Vertical waling MF 4.50m
Article n°
123.8 580663000
Fahrriegel MF 4,50m
[kg] Swivel plate MF
Article n°
4.5 580672000
Schwenkplatte MF
Galvanised Length: 29 cm Height: 20 cm
Galvanised
Brace stirrup 8
2.7 582751000
Spannbügel 8
Galvanised Width: 19 cm Height: 46 cm Width-across: 30 mm
Safety plate for brace stirrup 8 Sicherungsblech für Spannbügel 8
0.05 582753000
Powder-coated, red Length: 23 cm
Fahrriegelverlängerung MF
41.5 580659000
Starter block unit MF
23.2 580678000
Grundblockriegel MF Galvanised Height: 144 cm
Galvanised Length: 143 cm Width: 19 cm
Wind bracing MF/150F/K 6.00m
4.7 580665000
Wind bracing MF 6.00m
4.3 580677000
Windabspannung MF/150F/K 6,00m Galvanised
Suspension profile MF
43.0 580668000
Hängeprofil MF
Height: 368 cm
Windabspannung MF 6,00m
Galvanised
Waling-to-bracket holder 9-15cm Riegelhalter 9-15cm
Screw-on access bracket MF75 Anschraubbühne MF75
2.7 580625000
Galvanised
19.0 580669000
Galvanised Length: 113 cm Height: 152 cm
Waling-to-bracket holder
2.5 580526000
Keilriegelhalter
Galvanised Length: 26 cm Height: 31 cm
Distance profile MF
7.8 580670000
Distanzprofil MF
Length: 71 cm
Universal railing shackle
3.0 580478000
Universal-Geländerbügel
Galvanised Height: 20 cm
343
Climbing formwork MF240
Vertical waling extension MF
Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
No Content !!
[kg] Doka 4-part chain 3.20m
Article n°
15.0 588620000
Doka-Vierstrangkette 3,20m
[kg] Warning sign "No entry" 300x300mm Verbotsschild "Zutritt Verboten" 300x300mm
Article n°
0.70 581575000
Follow the directions in the "Operating Instructions"!
Tool box GF
GF-Werkzeugbox included in scope of supply:
Crane sling 3.50m
8.8 580461000
Kranseilschlaufe 3,50m
Diameter: 16 cm Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
(A) Reversible ratchet 1/2"
6.5 580390000 0.73 580580000
Galvanised Length: 30 cm
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
Additional tools MF
4.1 580682000
(A) Reversible ratchet 3/4"
1.5 580894000
Zusatzwerkzeuge MF consisting of: Galvanised Length: 50 cm
(B) (C) (D) (E) (F)
Box nut 17 1/2" Box nut 50 3/4" Extension 20cm 3/4" Transition piece A 1/2"x3/4" Universal cone spanner 15.0/20.0
0.07 0.81 0.68 0.18 0.90
580685000 581449000 580683000 580684000 581448000
Galvanised Length: 9 cm Width-across: 50 mm
Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
0.84 682002000 0.71 586013000
Anschraubkupplung
Galvanised Width-across: 22 mm
Nut for box spanner 24 1/2" L
0.30 586364000
Combination wrench 24
0.25 582839000
Hülsennuss 24 1/2" L
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
344
Ring-Maulschlüssel 24
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240
[kg] Ratchet MF 3/4" SW50
Article n°
[kg]
Article n°
3.8 580648000
Antriebsknarre MF 3/4" SW50 Galvanised
Doka Safety Systems
Climbing formwork MF240
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
345
Climbing formwork 150F | Crane-lifted climbing formwork | Doka Climbing Systems
Climbing formwork 150 F The tried-and-tested crane-jumped formwork
For the “skeleton” of the stadium, consisting of 52 wall piers with inclined cantilevering stepped beams, Doka supplied an ideal climbing-technology solution based on Climbing formwork 150 F. Jaber Al-Ahmed International Stadium, Kuwait Contractors: Mohamed Abdulmohsin Al Kharafi and Sons, Philipp Holzmann
346
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork 150F
Easy to set up, easy to operate – proven thousands of times over The Climbing formwork 150 F is a site-proven system that gives very cost-efficient service on crane-lifted climbing projects.
Ingenious modular system with only a very few separate parts Climbing formwork 150 F is extremely easy to set up, and features • easy adaptation to all construction projects with vertical walls • fast set-up and safe anchoring at any height • 1.65 m wide working platforms with a 70 cm roll-back for the formwork • optimum formwork adjustability in all directions
Easy handling, rapid working in every phase of the work Climbing formwork 150F
With this easy-to-operate crane-jumped formwork, you can • cut your labour costs, as the formwork can be set up and struck with no need for a crane • cut your crane time, as the formwork and scaffold can be lifted together in one piece
The system’s fully railed-in working platforms and integrable ladder system ensure the necessary safety for working at lofty heights.
Ladder system XS
347
Climbing formwork 150F | Crane-lifted climbing formwork | Doka Climbing Systems
References
348
Climbing formwork 150F
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork 150F
Doka climbing technology is being used to cast 21,000 m³ of concrete for two large-capacity LNG tanks in Thailand. The MF240 and 150F climbing formwork systems – both tailored for maximum cost efficiency – are in action here. Both systems are crane-jumped, are easy to handle and provide a high standard of safety. Map Ta Phut LNG tanks, Thailand Contractors: Christian & Nielsen
349
Climbing formwork 150F | Crane-lifted climbing formwork | Doka Climbing Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Climbing Climbing formwork Systems 150F
Climbing bracket 150 F
97.0 580401000
Kletterkonsole 150 F
Suspended platform 150 3.30m Hängebühne 150 3,30m
Galvanised
Galvanised Width: 173 cm Height: 255 cm
Vertical waling 3.00m
84.5 580446000
Fahrriegel 3,00m
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
Galvanised Length: 101 cm Height: 159 cm
Galvanised
Top scaffold bracket L painted Betonierkonsole L lackiert
Scissor-action spindle Galvanised
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Waling-to-bracket holder 9-15cm Riegelhalter 9-15cm
Galvanised Length: 121 cm Height: 235 cm
2.7 580625000
Galvanised
Waling-to-bracket holder
12.0 587153000
Painted blue Length: 101 cm Height: 159 cm
50.5 580455000
Scherenspindel
49.5 580410000
2.5 580526000
Keilriegelhalter
Galvanised Length: 26 cm Height: 31 cm
Wind bracing MF/150F/K 6.00m
Windabspannung MF/150F/K 6,00m Galvanised
350
4.7 580665000
Universal railing shackle
3.0 580478000
Universal-Geländerbügel
Galvanised Height: 20 cm
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork 150F
[kg] Crane sling 3.50m
Article n°
8.8 580461000
Kranseilschlaufe 3,50m
[kg] Warning sign "No entry" 300x300mm Verbotsschild "Zutritt Verboten" 300x300mm
Article n°
0.70 581575000
Diameter: 16 cm Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Universal tool box 15.0
9.1 580392000
Universal-Werkzeugbox 15,0 included in scope of supply:
(A) Reversible ratchet 1/2"
0.73 580580000
Galvanised Length: 30 cm
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
0.08 0.22 0.80 1.0 0.27 0.31 0.99 0.20 0.31 0.16 0.16 0.06 0.12 0.20 0.30
580577000 580587000 580897000 580586000 580590000 580589000 580585000 580581000 580582000 580583000 580598000 580576000 580584000 580575000 580579000
Galvanised Length: 8 cm Width-across: 30 mm
Climbing formwork 150F
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
(B) Fork wrench 13/17 (C) Fork wrench 22/24 (D) Fork wrench 30/32 (E) Fork wrench 36/41 (F) Ring spanner 17/19 (G) Square nut 22 (H) Box spanner 41 (I) Extension 11cm 1/2" (J) Extension 22cm 1/2" (K) Universal joint coupling (L) Nut for box spanner 19 1/2" L (M) Box nut 13 1/2" (N) Box nut 24 1/2" (O) Box nut 30 1/2" (P) Positioning cone spanner 15.0 DK
Galvanised
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Doka Safety Systems Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
0.84 682002000 0.71 586013000
Anschraubkupplung
Galvanised Width-across: 22 mm
Swivel coupler 48mm
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
351
Climbing formwork K | Crane-lifted climbing formwork | Doka Climbing Systems
Climbing formwork K The versatile climbing formwork assembled from a folding platform and a formwork element
A new residential quarter featuring many different, architecturally appealing buildings is taking shape right on the beachfront at Ashdod. One such development is the Sea & Sky project. The horizontally staggered balconies were no problem to construct using Climbing formwork K. Sea & Sky, Israel Contractors: Yachad Habonim
352
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork K
Extremely easy to set up, can be cycled in one piece The formwork element, climbing scaffold, and platform are firmly connected to one another and are cycled in one piece in a single crane-lift. This reduces lifting times, so it also cuts down on crane time.
Rapid working thanks to easy handling Reduced labour and crane times, as • climbing platform and formwork are cycled together in one piece • formwork can be plumbed and aligned very quickly • tiltable formwork element makes it easy to set up and strike the formwork • pre-assembled, work-ready platform units
Lower manpower costs thanks to fast working routines Climbing formwork K
This practical system • saves time by combining several operations into one • lowers labour costs as the formwork can be set up and struck with no need for a crane • avoids time-consuming interim storage
Ladder system XS
The Folding platform K can be combined with any Doka wall formwork system to make the versatile Climbing formwork K, using only two accessories (a suspended platform and connection shoes).
Folding platform K
Doka climbing technology
353
Climbing formwork K | Crane-lifted climbing formwork | Doka Climbing Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Climbing Climbing formwork Systems K
Doka folding platform K 3.00m Doka folding platform K 4.50m Doka-Faltbühne K
291.5 580442000 444.5 580443000
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
Folding bracket K
52.4 580441000
Faltkonsole K
Galvanised Length: 224 cm Height: 245 cm Delivery condition: folded closed
Connection shoe K
Mehrzweckriegel WS10 Top50
Hängebühne 120
Steel waling WS10 Top50 3.00m Steel waling WS10 Top50 3.50m Steel waling WS10 Top50 4.00m Stahlwandriegel WS10 Top50
Galvanised Length: 25 cm Width: 17 cm
Suspended platform 120 3.30m Suspended platform 120 4.30m
60.2 580011000 68.4 580012000 79.4 580013000
Painted blue
6.4 580451000
Anschlussschuh K
Multi-purpose waling WS10 Top50 3.00m Multi-purpose waling WS10 Top50 3.50m Multi-purpose waling WS10 Top50 4.00m
60.4 580048000 71.5 580050000 82.1 580052000
Painted blue
44.0 580411000 52.6 580412000
Galvanised Delivery condition: folded closed
Adjusting spindle M36
6.2 500663002
Höhenjustierspindel M36
Galvanised Length: 31 cm Height: 29.2 cm
Connecting pin 10cm
0.34 580201000
Verbindungsbolzen 10cm
Galvanised Length: 14 cm
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Galvanised
354
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised Length: 13 cm
Waling-to-bracket holder 9-15cm Riegelhalter 9-15cm
Galvanised
2.7 580625000
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork K
[kg] Waling-to-bracket holder
Article n°
2.5 580526000
Keilriegelhalter
[kg] Pin D16/112
Framax wedge clamp
Galvanised Length: 16 cm
1.5 588152000
Framax-Spannklemme
Top scaffold bracket L
12.6 587153500
Betonierkonsole L
Galvanised Length: 21 cm
Galvanised Length: 101 cm Height: 159 cm
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementstütze 340 consisting of:
0.29 500403330
Steckbolzen D16/112
Galvanised Length: 26 cm Height: 31 cm
2 pcs. Galvanised Length: 40.8 cm Width: 11.8 cm Height: 17.6 cm
Top scaffold bracket L painted Betonierkonsole L lackiert
(B) Prop shoe
2.1 588245000
12.0 587153000
Painted blue Length: 101 cm Height: 159 cm
Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
(C) Plumbing strut 340
Article n°
14.2 588247000
(D) Adjusting strut 120
7.2 588248000
Galvanised Length: 80 - 130 cm Galvanised Delivery condition: folded closed
Universal bracket 90
30.4 580476000
Universal-Konsole 90
Galvanised Length: 121 cm Height: 235 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Framax bracket 90
12.5 588167000
Framax-Konsole 90
Star screw
Galvanised Width: 103 cm Height: 185 cm Delivery condition: railing included
0.75 580425000
Sternschraube Galvanised Length: 17 cm
Wind bracing MF/150F/K 6.00m
Windabspannung MF/150F/K 6,00m Galvanised
4.7 580665000
Universal railing shackle
3.0 580478000
Universal-Geländerbügel
Galvanised Height: 20 cm
355
Climbing formwork K
Galvanised Length: 190 - 341 cm
Climbing formwork K | Crane-lifted climbing formwork | Doka Climbing Systems
No Content !!
[kg] Scaffold tube connection
Article n°
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
[kg] Universal tool box 15.0
Article n°
9.1 580392000
Universal-Werkzeugbox 15,0 included in scope of supply:
(A) Reversible ratchet 1/2"
0.73 580580000
Galvanised Length: 30 cm
Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Warning sign "No entry" 300x300mm
0.70 581575000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Verbotsschild "Zutritt Verboten" 300x300mm
(B) Fork wrench 13/17 (C) Fork wrench 22/24 (D) Fork wrench 30/32 (E) Fork wrench 36/41 (F) Ring spanner 17/19 (G) Square nut 22 (H) Box spanner 41 (I) Extension 11cm 1/2" (J) Extension 22cm 1/2" (K) Universal joint coupling (L) Nut for box spanner 19 1/2" L (M) Box nut 13 1/2" (N) Box nut 24 1/2" (O) Box nut 30 1/2" (P) Positioning cone spanner 15.0 DK
0.08 0.22 0.80 1.0 0.27 0.31 0.99 0.20 0.31 0.16 0.16 0.06 0.12 0.20 0.30
Galvanised Length: 8 cm Width-across: 30 mm
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
356
580577000 580587000 580897000 580586000 580590000 580589000 580585000 580581000 580582000 580583000 580598000 580576000 580584000 580575000 580579000
Climbing formwork K
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork K
357
Dam formwork | Crane-lifted climbing formwork | Doka Climbing Systems
Dam formwork The formwork system for mass concrete structures
Using advanced technologies and highly cost-effective formwork systems from Doka, one of the biggest dams in Germany, with a capacity of 39.2 million m³, was built in Rennsteig in Thuringia. Leibis-Lichte Dam, Germany Contractors: “ARGE Talsperre Leibis/Lichte” consortium
358
Doka Climbing Systems | Crane-lifted climbing formwork | Dam formwork
High load-bearing capacity, optimum safety, no form-ties This dam formwork stands out for its high load-bearing capacity and operational safety. Two systems, each with a different load capacity, enable it to be tailored to any mass concrete structure.
A practical system offering great versatility Good adaptability to the requirements of the structure: • All Doka framed and timber-beam formwork systems, and also steel formwork, can be used • Choice of two different versions, with an anchor tensile force of 150 kN or 220 kN • In both versions, the formwork is tiltable, and on the D22 system it can also be rolled back
Rapid working right from the very first block The unique constructional design of this dam formwork • enables it to be used right from the very first block Dam formwork
• reduces the need for modifications, thereby saving time and money
Workplace safety has top priority The working platforms of this dam formwork • provide high safety and let the crew work at high speed • can be quickly mounted and deployed as complete units comprising both pouring platforms and finishing-work platforms • are generously dimensioned - 1.70 m in the D15 system and 2.40 m in the D22 system
The dam formwork system that’s available in two versions: The D15 system, with an anchor tensile force of 150 kN and for blocks of up to 3.00 m in height, and the D22 system with an anchor tensile force of 220 kN and for block heights of up to 4.00 m
Ladder system XS
359
Dam formwork | Crane-lifted climbing formwork | Doka Climbing Systems
References
Dam formwork D15 was used for the intake structure of this 120 m tall hydroelectric power station, in conjunction with Large-area formwork Top 50. The outlet structure was constructed using a custom formwork made by the local Doka “Ready-to-Use” Service. Bostanj hydroelectric power station, Slovenia Contractors: Sava JV of Gradis Celje and Gradis Ljubljana
360
Dam formwork
Doka Climbing Systems | Crane-lifted climbing formwork | Dam formwork
Beginning with the huge floor blocks and continuing with the blocks of the spillway, with its inclined faces, this dam project was a great challenge. The precisely co-ordinated formwork resources on this project ensured high numbers of re-use cycles, meaning smaller quantities of formwork overall, and thus low costs. Midlands Dam, Mauritius Contractors: DTP Terrassement, Bouygues, TP J.V., Floreal Mauritius
361
Dam formwork | Crane-lifted climbing formwork | Doka Climbing Systems
Article list [kg]
Article n°
[kg]
Article n°
87.6 119.7 115.5 154.5
580632000 580638000 580613000 580615000
Doka formwork Dam Climbing Systems
Cantilever bracket D15 K Sperrenkonsole D15 K
136.4 580630000 Painted blue Width: 166 cm Delivery condition: railing included
Cantilever bracket D15/3 Sperrenkonsole D15/3
Vertical waling D15 3.00m U120 Vertical waling D15 3.50m U140 Vertical waling D22 3.00m U160 Vertical waling D22 4.00m U160 Sperrenriegel D
Painted blue
170.0 580631000 Painted blue Width: 215 cm Delivery condition: railing included
Spindle strut D15 3.00m
38.0 580633000
Spindelstrebe D15 3,00m
Painted blue Length: 211 - 252 cm
Cantilever bracket D22 K Sperrenkonsole D22 K
190.0 580610000
Spindle strut D22 3.00m
52.6 580616000
Spindelstrebe D22 3,00m
Painted blue Length: 215 - 258 cm
Painted blue Width: 189 cm Delivery condition: railing included
Spindle strut D22 4.00m
60.0 580617000
Spindelstrebe D22 4,00m
Painted blue Length: 258 - 301 cm
Cantilever bracket D22 F Sperrenkonsole D22 F
203.0 580611000 Painted blue Width: 237 cm Delivery condition: railing included
Swivel bearing plate D15
20.8 580634000
Gelenkaufsatz D15
Painted blue Length: 43.5 cm Height: 22.8 cm
362
Doka Climbing Systems | Crane-lifted climbing formwork | Dam formwork
[kg] Swivel bearing plate D15 S
Article n°
18.5 580635000
Gelenkaufsatz D15 S
[kg] Starter block unit D22
Swivel bearing plate D22
80.0 580622000
Grundblockriegel D22
Painted blue Length: 36.8 cm Height: 22.4 cm
Article n°
Painted blue Length: 147 cm
30.0 580618000
Gelenkaufsatz D22
Painted blue Length: 52 cm Height: 27 cm
Anchor waling 1.95m Anchor waling 2.95m
76.3 580545000 110.0 580546000
Ankerriegel
Painted blue
Swivel bearing plate D22 S
26.0 580624000
Gelenkaufsatz D22 S
Painted blue Length: 45 cm Height: 27 cm
Travelling profile D22 Suspension profile D15/D22
28.6 580621000
Hängeprofil D15/D22
20.0 580619000
Fahrprofil D22
Galvanised Length: 114 cm
Galvanised Height: 260 cm
Retraction set D15
21.0 580637000
Rückfahrset D15
Waling-to-bracket holder 9-24cm Riegelhalter 9-24cm
2.9 580639000
Galvanised
Screw-on access bracket MF75 Anschraubbühne MF75
19.0 580669000
Galvanised Length: 113 cm Height: 152 cm
Waling-to-bracket holder D22 Keilriegelhalter D22
2.7 580623000
Galvanised Length: 31 cm Height: 31 cm
Swivel plate MF
4.5 580672000
Schwenkplatte MF
Galvanised Length: 29 cm Height: 20 cm
Starter block unit D15
48.2 580636000
Grundblockriegel D15
Painted blue Length: 145 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
363
Dam formwork
Galvanised Length: 114 cm
Dam formwork | Crane-lifted climbing formwork | Doka Climbing Systems
No Content !!
[kg] Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
Article n°
0.84 682002000 0.71 586013000
Anschraubkupplung
Galvanised Width-across: 22 mm
Swivel coupler 48mm
Article n°
6.5 580390000
GF-Werkzeugbox included in scope of supply:
0.73 580580000
Galvanised Length: 30 cm
Galvanised Width-across: 22 mm
Fix-De-Fix remote uncoupling system 3150kg
Tool box GF
(A) Reversible ratchet 1/2"
1.5 582560000
Drehkupplung 48mm
[kg]
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Additional tools MF
4.1 580682000
(A) Reversible ratchet 3/4"
1.5 580894000
Zusatzwerkzeuge MF consisting of:
Warning sign "No entry" 300x300mm Verbotsschild "Zutritt Verboten" 300x300mm
0.70 581575000
Galvanised Length: 50 cm
(B) (C) (D) (E) (F)
Ratchet MF 3/4" SW50
3.8 580648000
Antriebsknarre MF 3/4" SW50
Box nut 17 1/2" Box nut 50 3/4" Extension 20cm 3/4" Transition piece A 1/2"x3/4" Universal cone spanner 15.0/20.0
0.07 0.81 0.68 0.18 0.90
Galvanised Length: 9 cm Width-across: 50 mm
Galvanised
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
364
580685000 581449000 580683000 580684000 581448000
Dam formwork
Doka Climbing Systems | Crane-lifted climbing formwork | Dam formwork
365
Shaft platform | Crane-lifted climbing formwork | Doka Climbing Systems
Shaft platform The climbing formwork for inside-shafts
Automatic climbing formwork Xclimb 60 was used in conjunction with the shaft platform in the building of this new combined-cycle gas turbine power plant. Timelkam combined-cycle gas turbine power plant, Austria Contractors: Alpine Mayreder, Porr
366
Doka Climbing Systems | Crane-lifted climbing formwork | Shaft platform
The cost-saving system for forming inside-shafts The shaft platform plus shaft formwork are quick and easy to reposition, in just one crane cycle.
High adaptability to any width of shaft The telescoping shaft beams allow easy adaptation to any dimension of structure.
Quick to reposition in just one crane cycle Reduced labour and crane times, as • the entire unit can be repositioned quickly and safely in one piece • the Stripping corner I makes it easy to set up and strike the formwork, with no need for a crane
Easy to mount Shaft platform
as required Handy, practical suspension-mounting on the structure, using • gravity pawl with no expendable anchoring components • main beam head
The perfect combination for shafts: Shaft platform plus Framax stripping corner I. The formwork is stripped and then set up again without any crane assistance, simply by turning a spindle with a hammer or reinforcement rod or with the easy-to-handle ratchet.
Framax stripping corner I
Doka climbing technology
367
Shaft platform | Crane-lifted climbing formwork | Doka Climbing Systems
References
At around 160 m in height, the Lavant Viaduct is one of the tallest bridges in Austria. The Shaft platform was used in conjunction with Large-area formwork Top 50 for forming the inside-shafts. P19 Lavant Viaduct, Austria Contractors: Steiner Bau
368
Shaft platform
Doka Climbing Systems | Crane-lifted climbing formwork | Shaft platform
The structure core of the Hoch Zwei office tower in Vienna was climbed ahead of the floor-slabs using a combination of Climbing formwork MF 240 and Large-area formwork Top 50, while the shaft cores were formed using the Shaft platform, Stripping corner I and Large-area formwork Top 50. Hoch Zwei, office tower, Austria Contractors: Universale Bau
369
Shaft platform | Crane-lifted climbing formwork | Doka Climbing Systems
Article list [kg]
Article n°
56.0 65.0 107.5 156.5 261.0
580686000 580687000 580688000 580689000 580690000
[kg]
Article n°
Doka platform Shaft Climbing Systems
Telescopic shaft beam 1.45-1.65m Telescopic shaft beam 1.65-2.00m Telescopic shaft beam 2.00-2.70m Telescopic shaft beam 2.70-3.80m Telescopic shaft beam 3.80-5.90m Teleskop-Schachtträger
Galvanised
Pawl for shaft platform
18.0 580466000
Klinke für Schachtbühne
Galvanised Length: 55 cm Width-across: 19 mm
Box for latch 20x20x15cm
2.6 580608000
Aussparungskasten 20x20x15cm Powder-coated, blue
Plug 15.0
0.006 580609000
Verschlussstopfen 15,0 Colourless Diameter: 1.9 cm
Main beam head
14.9 580464000
Bühnenkopf
Painted blue Length: 49 cm
Tool box GF
GF-Werkzeugbox included in scope of supply:
(A) Reversible ratchet 1/2"
6.5 580390000 0.73 580580000
Galvanised Length: 30 cm
(B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L)
Fork wrench 13/17 Fork wrench 22/24 Fork wrench 30/32 Ring spanner 17/19 Extension 11cm 1/2" Extension 22cm 1/2" Universal joint coupling Nut for box spanner 19 1/2" L Box nut 13 1/2" Box nut 24 1/2" Box nut 30 1/2"
370
0.08 0.22 0.80 0.27 0.20 0.31 0.16 0.16 0.06 0.12 0.20
580577000 580587000 580897000 580590000 580581000 580582000 580583000 580598000 580576000 580584000 580575000
Tie rod wrench 15.0/20.0
1.9 580594000
Ankerstabschlüssel 15,0/20,0
Galvanised Length: 37 cm Diameter: 8 cm
Shaft platform
Doka Climbing Systems | Crane-lifted climbing formwork | Shaft platform
371
Doka Load-bearing Systems
Doka Load-bearing Systems The most economical system – and the safest
372
Doka Load-bearing Systems
Doka Load-bearing Systems
Doka Load-bearing Systems are designed for the utmost versatility, maximum economy and the very highest workplace safety. This is why they ensure fast and efficient forming operations. With its high-capacity shoring systems for the building-construction and civil-engineering fields, highly adaptable forming carriages for bridge-building, and cost-saving tunnel formwork, Doka has the right solution for every requirement.
Page Shoring towers Load-bearing tower Staxo 100
374
Load-bearing tower Staxo 40
390
Load-bearing tower d2
402
Tunnel formwork Heavy-duty supporting system SL-1
412
Bridge formwork Composite forming carriage
416
Cantilever forming traveller
422
Bridge edge beam formwork T
428
Forming wagon T
434
Forming wagon TU
442
373
Shoring towers Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
Load-bearing tower Staxo 100 The extra-high-capacity, extra-fast shoring system
The variable inter-frame spacing of the Load-bearing tower Staxo 100 means that it can be optimally adapted to the loads needing to be transferred. By maximising the use made of each item of equipment, this ensures optimum cost-efficiency. Height differences, too, can easily be evened out with the three sizes of frame and the easy-to-operate screwjack feet and U-heads. Mariazeller Europeum congress centre and event venue, Austria Contractors: Herbitschek
374
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
High load capacity, combined with maximum safety With its rugged steel frames, Staxo 100 is designed for large shoring-heights and high loads.
The very highest safety in every situation Staxo 100 gives a boost to safety on your site, with its • ladders with slip-resistant rungs integrated into the frames • defined anchorage points for personal fall arrest systems (PFAS) • “mounted-ahead” railings for erecting and dismantling the towers safely
Load-bearing tower Staxo 100
• decking units with and without manholes
High load capacity combined with flexible range of use Safe shoring of heavy loads made possible by • load-bearing capacity of up to 100 kN per leg • large frame width, for optimum stability • exceptionally high rigidity
Maximum flexibility for optimum adaptation to your construction project Cost-saving usage is ensured by • variable inter-frame spacing, from 0.60 m to 3.00 m • continuous height adjustment and last-millimetre fine adjustment • perfect adaptability to irregular layouts, using added single legs
Load capacity up to 100 kN per leg
375
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
System Staxo 100 frames • Extremely sturdy steel frames with heights of 0.90 m, 1.20 m or 1.80 m for easy height adjustment • Integrated connector components for easy, toolless assembly • Gravity catches for mounting the diagonal crosses quickly and safely • Integral ladder with non-skid rungs • Defined anchorage points for personal fall arrest systems • Various ways of connecting scaffold-tube couplers
No Content !! Diagonal crosses • Firmly connected diagonal braces are quick and easy to mount • Different lengths of diagonal cross permit flexible interframe spacing, for cost-optimising the load capacity • Unmistakable length identification provided by colourcoded clips and embossed markings
Screw-jack heads and feet • Height adjustment possible right down to the last millimetre • Easy to operate, thanks to special thread geometry and integral fixing handle • Can be released with minimal physical effort, even when under load
No Content !!
Heavy duty screw jacks The screw-jack extension length of up to 2 m per load-bearing tower permits optimum adaptation to changes in the level of the support base, to downstand beams and to sloping slabs.
376
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
No Content !!
“Mounted-ahead” railings • For erecting and dismantling the towerframes safely when this is done with the tower in the upright • Toeboard for safe workplaces e.g. beneath the towerframe superstructure
Load-bearing tower Staxo 100
• A mounting gallows makes it easy to pull up the towerframes
98003-268-01 98003-269-01
Added single legs
Decking units
• For greater horizontal flexibility • The ideal way of adapting to any structure geometry
• For safe towerframe assembly and safe working inside the tower
• Continuous positioning possible up to 1.50 m away from the tower
• Lightweight aluminium decking units with or without a manhole opening
• Optimised equipment utilisation
• Only two decking units needed on each storey of the tower • Integral anti-liftout guard makes it possible to fit the decking units even when the towers are pre-assembled in the horizontal 377
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
Utilisation Simple, fast vertical stacking • as there are only a small number of different parts, which makes for easier handling • as the connection sleeves and connecting pins are all integrated into the frames • thanks to the logical erection sequence • as the diagonal crosses are all clearly and unmistakably identified with colour-coded clips
Flexible height adjustment • using the easy-to-operate screw-jack heads and feet for continuous adjustment, with millimetre accuracy, even when under load • with a 2 m jack extension length when the extrastrong Staxo 100 heavy duty screw jack is used
378
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
No Content !!
Safe access to high-up workplaces by combining standard Staxo 100 frames and pre-assembled aluminium stairway elements
Erecting towers using a telescoping stacker truck This is the most effort-saving and safest method for erecting and dismantling towers in the upright, and for repositioning the towers
Adaptation to unusual layouts
Erecting towers in the upright
by combining the towers with single legs
with “mounted-ahead” railings and decking units with manholes, for the very highest safety
Fast, safe repositioning
Erecting towers in the horizontal
using winches, Shifting carriages TG or forklift trucks
a safe, fast method of erecting the towers
379
Load-bearing tower Staxo 100
Stair tower
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
References
During construction of this residential complex in Vienna, a cantilevering loggia slab at a height of 16 m was safely and cost-savingly shored, along a total length of 100 m, using Staxo 100. “Brauerei Liesing” residential complex, Austria Contractors: Bilfinger Berger
380
Load-bearing tower Staxo 100
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
The cover-slab formwork for this new tunnel on Edmonton’s Light Rail Transit System was shored with Load-bearing towers Staxo 100. Staxo 100 is designed for safely transferring high loads, and this makes it ideal for widely varying shoring-tasks in the field of civil engineering. Edmonton Light Rail Transit System, Canada Contractors: AECON Infrastructure Group
381
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Load-bearing Load-bearing tower Systems Staxo 100
Staxo 100 frame 1.80m Staxo 100 frame 1.20m Staxo 100 frame 0.90m
37.0 582300000 28.0 582301000 24.0 582302000
Staxo 100-Rahmen
U-head D
6.7 582709000
Gabelkopf D Galvanised Length: 20 cm Width: 22 cm Height: 37 cm
Galvanised
4-way screw-jack head
10.4 582638000
Vierwegkopfspindel
Galvanised Height: 86 cm
Diagonal cross 9.060 Diagonal cross 9.100 Diagonal cross 9.150 Diagonal cross 9.165 Diagonal cross 9.175 Diagonal cross 9.200 Diagonal cross 9.250 Diagonal cross 9.300 Diagonal cross 12.060 Diagonal cross 12.100 Diagonal cross 12.150 Diagonal cross 12.165 Diagonal cross 12.175 Diagonal cross 12.200 Diagonal cross 12.250 Diagonal cross 12.300 Diagonal cross 18.100 Diagonal cross 18.150 Diagonal cross 18.165 Diagonal cross 18.175 Diagonal cross 18.200 Diagonal cross 18.250 Diagonal cross 18.300 Diagonalkreuz
3.1 4.1 5.2 5.7 6.1 6.6 8.0 9.0 4.2 4.6 5.7 6.1 6.3 6.9 8.3 9.3 6.1 6.9 7.3 7.8 7.8 9.1 10.3
582322000 582772000 582773000 582627000 582334000 582774000 582775000 582323000 582324000 582610000 582612000 582628000 582335000 582614000 582616000 582325000 582620000 582622000 582629000 582336000 582624000 582626000 582326000
Screw jack U-head
9.2 582636000
Kopfspindel
Galvanised Height: 74 cm
Heavy duty screw jack 70 top Lastspindel 70 oben
9.2 582327000
Height: 106 cm
Galvanised Delivery condition: folded closed
Split nut B
2.0 582634000
Spannmutter B Galvanised
Diagonal cross H 9.100 Diagonal cross H 9.150 Diagonal cross H 9.200 Diagonal cross H 9.250 Diagonal cross H 12.100 Diagonal cross H 12.150 Diagonal cross H 12.200 Diagonal cross H 12.250 Diagonalkreuz H
5.7 7.2 9.3 11.3 5.8 7.5 9.3 10.5
582337000 582338000 582339000 582340000 582341000 582342000 582343000 582344000
Clamping plate for U-head
2.0 502709030
Klemmplatte für Gabelkopf
Galvanised Length: 24 cm Width: 9 cm
Wing nut 15.0
0.31 581961000
Flügelmutter 15,0 Galvanised Length: 10 cm Height: 5 cm Width-across: 27 mm
Galvanised Delivery condition: folded closed
Locking rod 15.0 330mm
0.48 582641000
Quetschteil 15,0
Galvanised Width-across: 24 mm
382
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
[kg] Dokamatic table Staxo spindle connector
Staxo-Spindelanschluss Dokamatic-Tisch Galvanised Length: 20.7 cm
Wedge for screw jack ..... %
Article n°
3.9 582347000
[kg] Staxo 100 single leg 1.80m Staxo 100 single leg 1.20m Staxo 100 single leg 0.90m
Article n°
24.0 582303000 21.5 582304000 20.2 582305000
Staxo 100-Einzelstiel
Galvanised
0.46 176071000
Spindelkeil ..... %
Length: 20 cm Width: 16 cm
Staxo wedge support WS10
8.7 582796000
Staxo-Keilauflager WS10
Swivel bearing plate for screw jack U-head Gelenkaufsatz Kopfspindel
Doka floor prop Eurex 60 550 Doka-Deckenstütze Eurex 60 550
Galvanised Length: 31 cm Width: 15 cm Height: 23 cm
47.0 582650000
Aluminium Height: 345 - 555 cm
5.2 582799000
Screw jack foot
9.0 582637000
Fußspindel
Galvanised Height: 69 cm
Heavy duty screw jack 70
8.8 582639000
Lastspindel 70
Heavy duty screw jack 130
Extension Eurex 60 2.00m
21.3 582651000
Verlängerung Eurex 60 2,00m
Galvanised Height: 101 cm
Powder-coated, blue Aluminium Length: 250 cm
13.0 582711000
Lastspindel 130
Galvanised Height: 173 cm
Coupler Eurex 60
8.6 582652000
Kupplungsstück Eurex 60 Aluminium Length: 100 cm Diameter: 12.8 cm
U-head Eurex 60
2.9 582656000
Gabelkopf Eurex 60
Galvanised Length: 22 cm Width: 20 cm Height: 12 cm
383
Load-bearing tower Staxo 100
Galvanised Length: 20.8 cm Width: 15.0 cm Height: 14.4 cm
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] 4-way head Eurex 60
Article n°
4.5 582655000
Vierwegkopf Eurex 60
[kg] Plumbing strut 340 for precast members Justierstütze 340 für Fertigteile
Galvanised Length: 25 cm Width: 21 cm Height: 21 cm
Plumbing strut Eurex 60 550
Article n°
18.2 588296000
Galvanised Length: 190 - 341 cm
42.5 582658000
Justierstütze Eurex 60 550
Powder-coated, blue Aluminium Length: 343 - 553 cm
Plumbing strut 540 for precast members Justierstütze 540 für Fertigteile
33.3 588297000
Galvanised Length: 309 - 550 cm
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Prop head Eurex 60 Top50
Galvanised Length: 75.5 cm
7.1 582665000
Stützenkopf Eurex 60 Top50
Galvanised Height: 50 cm
Removable folding tripod 1.20m Connector Eurex 60
3.9 582657000
Verbindungsstück Eurex 60
Stützbein 1,20m
Galvanised Height: 120 cm Delivery condition: folded closed
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
Plumbing strut shoe Eurex 60 Justierstützenfuß Eurex 60
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
Swivel coupler 48mm Eurex 60 Drehkupplung 48mm Eurex 60
20.7 586145000
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
1.0 582654000
Galvanised Width-across: 22 mm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
384
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
Gerüstbelag
Article n°
5.7 8.5 12.0 14.7 17.5 21.0 24.8
582330500 582306500 582307500 582332500 582308500 582309500 582310500
Staxo 100 side railing 100 Staxo 100 side railing 150 Staxo 100 side railing 175 Staxo 100 side railing 200 Staxo 100 side railing 250 Staxo 100 side railing 300 Staxo 100-Seitengeländer
Gerüstbelag mit Durchstieg
10.2 16.5 15.0 17.5 21.0 24.8
582311500 582312500 582333500 582313500 582314500 582315500
Spring locked connecting pin 16mm Federbolzen 16mm
5.5 582329000
Staxo 100-Fußwehr
13.5 16.0 15.3 18.0 22.0 23.0
582317000 582318000 582331000 582319000 582320000 582321000
Galvanised Length: 131 cm Height: 15 cm
0.25 582528000
Galvanised Length: 15 cm
Aluminium
Staxo 100 toeboard
Article n°
Galvanised Height: 152 cm
Aluminium
Scaffold planking 60/100cm with manhole Scaffold planking 60/150cm with manhole Scaffold planking 60/175cm with manhole Scaffold planking 60/200cm with manhole Scaffold planking 60/250cm with manhole Scaffold planking 60/300cm with manhole
[kg]
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Staxo 100 planking strut 1.00m Staxo 100 planking strut 1.50m Staxo 100-Belagstrebe
6.1 582348000 14.0 582349000
Galvanised
Transition swivel coupler 48/76mm
1.9 582563000
Swivel coupler 48mm
1.5 582560000
Übergangsdrehkupplung 48/76mm Galvanised Width-across: 22 mm
Staxo 100 front railing
10.5 582316000
Staxo 100-Stirngeländer
Galvanised Length: 140 cm Height: 152 cm
Drehkupplung 48mm
Galvanised Width-across: 22 mm
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
Pin coupling 60mm
1.0 582546000
Zapfenkupplung 60mm
Galvanised Width-across: 22 mm
385
Load-bearing tower Staxo 100
Scaffold planking 60/60cm Scaffold planking 60/100cm Scaffold planking 60/150cm Scaffold planking 60/175cm Scaffold planking 60/200cm Scaffold planking 60/250cm Scaffold planking 60/300cm
[kg]
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] Brace stirrup 8
Article n°
2.7 582751000
Spannbügel 8
[kg] Bracing for load-bearing towers Abspannung für Traggerüste
Galvanised Width: 19 cm Height: 46 cm Width-across: 30 mm
Rafter plate right Rafter plate left
Article n°
11.6 582795000
Galvanised Painted blue
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Galvanised Length: 17 cm
Spindle connecting plate T
3.1 584371000
Spindellasche T
Handrail post 1.50m
12.4 582754000
Geländer 1,50m
Galvanised Width: 20 cm Height: 25 cm
Galvanised
Universal plug R20/25
0.003 588180000
Kombi Ankerstopfen R20/25 Blue Diameter: 3 cm
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m
Staxo 100 mounting gallows 40kg Staxo 100-Montagegalgen 40kg
Galvanised Height: 258 cm Follow the directions in the "Operating Instructions"!
Galvanised
Scaffold tube connection
7.5 582328000
0.27 584375000
Gerüstrohranschluss
Galvanised Height: 7 cm
Staxo 100 hoisting cable 40kg 30m Staxo 100-Aufzugsseil 40kg 30m
Lifting rod 15.0
1.3 582346000
1.9 586074000
Umsetzstab 15,0
Painted blue Height: 57 cm Follow the directions in the "Operating Instructions"!
Staxo 100 attaching cable 40cm Staxo 100-Anschlagseil 40cm
Retaining plate 15.0
1.8 586073000
Jochplatte 15,0
Galvanised Length: 17 cm Width: 12 cm Height: 11 cm
386
0.31 582345000
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
[kg] Winch 70
Article n°
31.0 582779000
Zahnstangenwinde 70
[kg] Shifting carriage TG
Galvanised Length: 99 cm Width: 152 cm Height: 148 cm Follow the directions in the "Operating Instructions"!
63.8 582780000
Zahnstangenwinde 125
Painted blue Height: 189 cm Follow the directions in the "Operating Instructions"!
Staxo/d2 adapter frame
14.1 582781000
Staxo/d2-Adapter
Fork lift shifting device TG
83.0 582797000
Umsetzgerät TG für Stapler
Galvanised Length: 60 cm Width: 113 cm Height: 52 cm Follow the directions in the "Operating Instructions"!
Multi-purpose waling WS10 Top50 2.00m
38.9 580007000
Connecting pin 10cm
0.34 580201000
Mehrzweckriegel WS10 Top50 2,00m Painted blue
Painted blue Length: 37 cm Width: 36 cm Height: 36 cm
Solid tire wheel
34.5 582573000
Vollelastikrad
Verbindungsbolzen 10cm
Painted blue Height: 45 cm
Heavy duty wheel 15kN
Galvanised Length: 14 cm
33.0 582575000
Schwerlastrad 15kN
Spring cotter 5mm Galvanised Length: 13 cm
Painted blue Height: 41 cm
Double wheeled transporter
5.0 582558000
Zweirad-Transportroller
Painted blue Width: 57 cm
0.05 580204000
Federvorstecker 5mm
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Pallet for Staxo/Aluxo
64.6 582783000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Doka-Traggerüstpalette
Galvanised Length: 180 cm Width: 120 cm Height: 29 cm Follow the directions in the "Operating Instructions"!
387
Load-bearing tower Staxo 100
Winch 125
168.0 582778000
Hubwagen TG
Painted blue Height: 126 cm Follow the directions in the "Operating Instructions"!
Article n°
Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Article n°
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
388
[kg]
Article n°
Load-bearing tower Staxo 100
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100
389
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
Load-bearing tower Staxo 40 The ergonomic shoring system for the building construction field
Its load-bearing capacity is perfectly tailored to the needs of the building construction segment, it is quick and easy to erect and features a high level of ergonomic design – in short, Staxo 40 sets a wholly new standard.
390
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
Revolutionary H-frame for easy handling and fast working The newly developed Load-bearing tower Staxo 40 stands out for being extremely easy to handle, and for its superb adaptability to your building-construction project.
Maximum safety even with large shoring heights Safe erection and dismantling ensured by • a wide range of accessories for safe assembling and dismantling in the upright • defined anchorage points for personal fall arrest systems (PFAS) • brackets for enhanced safety at slab-edges • liftout-proof decking units
Easy to handle Load-bearing tower Staxo 40
for high-speed working Highly ergonomic design, featuring • low unit weight • ergonomically optimised frame construction • small number of system components • logical assembly sequence
Highly cost-efficient for all building-construction shoring needs Unbeatably cost-efficient, thanks to • fast workflow • crane-time-saving erection method • optimised equipment utilisation thanks to the flexible inter-frame spacing
391
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
System Staxo 40 frames • Ergonomically shaped H-frame geometry with low dead weight for easy handling and short assembly times • Sturdy, galvanised H-frames with heights of 0.90 m, 1.20 m and 1.80 m for easy and cost-efficient height adjustment • Defined anchorage points for personal fall arrest systems, and integrated ladderways
Diagonal crosses • Different lengths for variable inter-frame spacing up to max. 3.00 m, in 50 cm increments • Are fixed to the basic frame safely and quickly by innovative gravity catches • Unmistakable length identification provided by colourcoded clips and embossed markings
Integrated universal U-bracket • as an anchorage point for personal fall arrest systems (PFAS) • for erecting and dismantling the towers quickly and safely
392
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
No Content !!
Gapless, full-area decking
Screw-jack heads and feet • Extension lengths of 70 cm (at top and bottom) for maximum adaptability to changes of level and to inclinations • Precision adjustment, right down to the last millimetre, even when under load • Three-wing spindle nut makes for easy height adjustment and rapid screwjack release • Easy to release, using either a formwork hammer or a reinforcement rod
393
Load-bearing tower Staxo 40
for erecting and dismantling the towerframe superstructure quickly and safely
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
Utilisation Designed for efficient, safe erection • its lightweight, ergonomically designed components mean that it can be erected with minimal effort, with no need for the crane • can be erected in the upright, with decking units and integrated ladderways for high workplace safety • assembly in the horizontal (for maximum workplace safety) is also possible
No Content !!
The unique framework scaffolding with passageway openings for fast, safe working inside the scaffold and beneath the towerframe superstructure. This also makes it ideal for use as bracing scaffolding.
394
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
Safe working at the edge of the floor-slab
Concrete loads transferred safely
by mounting platform brackets to the towerframes
by the high load capacity of the bracket combined with a plumbing strut Load-bearing tower Staxo 40
No Content !!
No Content !! Adaptability to widely differing layouts
Connectability for scaffold tubes
by variable combinations with extra legs
Scaffold tubes can be connected to every frame, using standard couplers 98003-268-01 98003-269-01
Quick and easy to reposition using shifting wheels
Convenient way-in to the tower
The simple, sturdy solution for the very highest stability, with a quick-fix connection to the tower
for quicker access to the inside of the scaffold
395
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
Article list [kg]
Article n°
[kg]
Article n°
2.0 2.2 2.6 3.0 3.3 5.9 6.8 2.2 2.5 2.9 3.1 3.5 6.0 6.7 3.0 3.3 5.8 6.1 6.4 6.9 7.4
582740000 582741000 582742000 582743000 582744000 582745000 582746000 582712000 582713000 582714000 582715000 582716000 582717000 582718000 582720000 582721000 582722000 582723000 582724000 582725000 582726000
1.6 1.9 2.3 2.7 3.0 3.4 3.8
582730000 582731000 582732000 582733000 582734000 582735000 582736000
Doka Load-bearing Load-bearing tower Systems Staxo 40
Staxo 40 frame 1.80m Staxo 40 frame 1.20m Staxo 40 frame 0.90m
24.5 582200000 18.0 582201000 15.0 582202000
Staxo 40-Rahmen
Galvanised
Staxo 40 coupler
0.50 582203000
Staxo 40-Kupplungsstück
Diagonal brace d2 9.100 Diagonal brace d2 9.125 Diagonal brace d2 9.152 Diagonal brace d2 9.175 Diagonal brace d2 9.200 Diagonal brace d2 9.225 Diagonal brace d2 9.250 Diagonal brace d2 12.100 Diagonal brace d2 12.125 Diagonal brace d2 12.152 Diagonal brace d2 12.175 Diagonal brace d2 12.200 Diagonal brace d2 12.225 Diagonal brace d2 12.250 Diagonal brace d2 18.100 Diagonal brace d2 18.125 Diagonal brace d2 18.152 Diagonal brace d2 18.175 Diagonal brace d2 18.200 Diagonal brace d2 18.225 Diagonal brace d2 18.250 Diagonalstrebe d2
Galvanised
Galvanised Height: 30.8 cm
Staxo 40 tube connector D48.3mm Staxo 40-Rohrstecker D48,3mm
0.07 582204000
Yellow
Diagonal cross 9.100 Diagonal cross 9.150 Diagonal cross 9.165 Diagonal cross 9.175 Diagonal cross 9.200 Diagonal cross 9.250 Diagonal cross 9.300 Diagonal cross 12.100 Diagonal cross 12.150 Diagonal cross 12.165 Diagonal cross 12.175 Diagonal cross 12.200 Diagonal cross 12.250 Diagonal cross 12.300 Diagonal cross 18.100 Diagonal cross 18.150 Diagonal cross 18.165 Diagonal cross 18.175 Diagonal cross 18.200 Diagonal cross 18.250 Diagonal cross 18.300 Diagonalkreuz
4.1 5.2 5.7 6.1 6.6 8.0 9.0 4.6 5.7 6.1 6.3 6.9 8.3 9.3 6.1 6.9 7.3 7.8 7.8 9.1 10.3 Galvanised Delivery condition: folded closed
582772000 582773000 582627000 582334000 582774000 582775000 582323000 582610000 582612000 582628000 582335000 582614000 582616000 582325000 582620000 582622000 582629000 582336000 582624000 582626000 582326000
Horizontal brace d2 100 Horizontal brace d2 125 Horizontal brace d2 152 Horizontal brace d2 175 Horizontal brace d2 200 Horizontal brace d2 225 Horizontal brace d2 250 Horizontalstrebe d2
Galvanised
Staxo 40 4-way screw-jack head 30cm
6.7 582209000
Staxo 40 4-way screw-jack head 70cm
9.0 582210000
Staxo 40 screw jack U-head 30cm
4.9 582207000
Staxo 40-Vierwegkopfspindel 30cm Galvanised Height: 67.8 cm
Staxo 40-Vierwegkopfspindel 70cm Galvanised Height: 117.6 cm
Staxo 40-Kopfspindel 30cm
Galvanised Height: 55.7 cm
396
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
[kg] Staxo 40 screw jack U-head 70cm Staxo 40-Kopfspindel 70cm
Article n°
7.2 582208000
Galvanised Height: 105.5 cm
Scaffold planking 60/60cm Scaffold planking 60/100cm Scaffold planking 60/150cm Scaffold planking 60/175cm Scaffold planking 60/200cm Scaffold planking 60/250cm Scaffold planking 60/300cm Gerüstbelag
[kg]
Article n°
5.7 8.5 12.0 14.7 17.5 21.0 24.8
582330500 582306500 582307500 582332500 582308500 582309500 582310500
10.2 16.5 15.0 17.5 21.0 24.8
582311500 582312500 582333500 582313500 582314500 582315500
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Aluminium
Staxo 40 screw jack foot 30cm Staxo 40-Fußspindel 30cm
4.0 582205000
Galvanised Height: 50.7 cm
Staxo 40 screw jack foot 70cm Staxo 40-Fußspindel 70cm
Scaffold planking 60/100cm with manhole Scaffold planking 60/150cm with manhole Scaffold planking 60/175cm with manhole Scaffold planking 60/200cm with manhole Scaffold planking 60/250cm with manhole Scaffold planking 60/300cm with manhole 6.3 582206000
Gerüstbelag mit Durchstieg
Aluminium
Staxo 40-Anti-dropout lock
0.50 582211000
Staxo 40-Spindelsicherung
Galvanised Length: 9.0 cm Width: 8.8 cm Height: 8.6 cm
Staxo 40 bracket 90cm
8.5 582212000
Staxo 40-Konsole 90cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
Galvanised
Galvanised Width: 108.9 cm Height: 65.5 cm
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
Staxo 40 frame strut 1.40m
6.0 582213000
Staxo 40-Rahmenstrebe 1,40m
Galvanised
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
Staxo 40 planking strut 1.00m Staxo 40 planking strut 1.50m Staxo 40 planking strut 2.00m Staxo 40-Belagstrebe
Galvanised
5.0 582215000 6.8 582216000 8.5 582217000
Screw-on coupler 48mm 95
0.71 586013000
Anschraubkupplung 48mm 95
Galvanised
397
Load-bearing tower Staxo 40
Galvanised Height: 100.5 cm
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
[kg] Handrail post XP 1.20m
Article n°
4.0 586460000
Geländersteher XP 1,20m
Galvanised Height: 118 cm
[kg] Fix-De-Fix remote uncoupling system 3150kg
0.003 588180000
Kombi Ankerstopfen R20/25
Gerüstrohrhalter D48mm
Blue Diameter: 3 cm
1.1 586464000
Galvanised Height: 18 cm
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Universal plug R20/25
Scaffold tube holder D48mm
Article n°
Locking rod 15.0 330mm
0.48 582641000
Quetschteil 15,0
Galvanised Width-across: 24 mm
Toeboard holder XP 1.20m
0.50 586461000
Fußwehrhalter XP 1,20m
Galvanised Height: 21 cm
Rafter plate right Rafter plate left
Clamping plate for U-head Galvanised Length: 24 cm Width: 9 cm
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Wing nut 15.0
Galvanised Length: 17 cm
Staxo 40 shifting wheel
0.31 581961000
Flügelmutter 15,0 Galvanised Length: 10 cm Height: 5 cm Width-across: 27 mm
25.0 582218000
Staxo 40-Umsetzrad
2.0 502709030
Klemmplatte für Gabelkopf
Anchoring shoe for stair tower
Galvanised Height: 120 cm
Ankerschuh für Treppenturm
Galvanised Length: 22 cm Width: 12 cm Height: 22 cm
Cone screw B 7cm
0.86 581444000
Konusschraube B 7cm
Lifting rod 15.0
Painted blue Height: 57 cm Follow the directions in the "Operating Instructions"!
Retaining plate 15.0
1.8 586073000
Jochplatte 15,0
Galvanised Length: 17 cm Width: 12 cm Height: 11 cm
398
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
1.9 586074000
Umsetzstab 15,0
3.4 582680000
Bracing for load-bearing towers Abspannung für Traggerüste
Galvanised Painted blue
11.6 582795000
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
[kg] Connecting pin 10cm
Article n°
0.34 580201000
Verbindungsbolzen 10cm
[kg] Connector Eurex 60
Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
0.05 580204000
Federvorstecker 5mm
Plumbing strut shoe Eurex 60 Justierstützenfuß Eurex 60
Galvanised Length: 13 cm
8.5 582660000
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
42.5 582658000
Justierstütze Eurex 60 550
Powder-coated, blue Aluminium Length: 343 - 553 cm
Plumbing strut 340 for precast members Justierstütze 340 für Fertigteile
18.2 588296000
Galvanised Length: 190 - 341 cm
Plumbing strut 540 for precast members Justierstütze 540 für Fertigteile
33.3 588297000
Galvanised Length: 309 - 550 cm
Extension Eurex 60 2.00m
21.3 582651000
Verlängerung Eurex 60 2,00m
Powder-coated, blue Aluminium Length: 250 cm
Plumbing strut 340
14.2 588247000
Justierstütze 340
Galvanised Length: 190 - 341 cm
Coupler Eurex 60
8.6 582652000
Kupplungsstück Eurex 60 Aluminium Length: 100 cm Diameter: 12.8 cm
Prop head Eurex 60 Top50
7.1 582665000
Stützenkopf Eurex 60 Top50
Galvanised Height: 50 cm
399
Load-bearing tower Staxo 40
Plumbing strut Eurex 60 550
3.9 582657000
Verbindungsstück Eurex 60
Galvanised Length: 14 cm
Spring cotter 5mm
Article n°
Load-bearing tower Staxo 40 | Shoring towers | Doka Load-bearing Systems
[kg] Plumbing strut 540
Article n°
29.6 588250000
Justierstütze 540
[kg] Super plate 15.0
0.91 581966000
Superplatte 15,0
Galvanised Length: 309 - 550 cm
Article n°
Galvanised Height: 6 cm Diameter: 12 cm Width-across: 27 mm
Staxo wedge support WS10
8.7 582796000
Staxo-Keilauflager WS10
Galvanised Length: 31 cm Width: 15 cm Height: 23 cm
Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Prop shoe
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
2.1 588245000
Stützenschuh Galvanised Length: 20 cm Width: 11 cm Height: 10 cm
Staxo 40 plumbing strut adapter Staxo 40-Justierstützenadapter
42.0 586151000
1.5 582214000
Galvanised Height: 16 cm
Bolt-on castor set B
33.6 586168000
Anklemm-Radsatz B
Painted blue
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Doka Safety Systems
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Spindle connecting plate T
3.1 584371000
Spindellasche T
Galvanised Width: 20 cm Height: 25 cm
Wedge for screw jack ..... %
0.46 176071000
Spindelkeil ..... %
Length: 20 cm Width: 16 cm
400
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
Load-bearing tower Staxo 40
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 40
401
Load-bearing tower d2 | Shoring towers | Doka Load-bearing Systems
Load-bearing tower d2 The tried-and-tested shoring system for many different fields of use
During construction of the Iris Bay office building in Dubai, a 4 m thick, crescent-shaped CIP concrete frame is being safely shored with d2 load-bearing towers, up to a height of 36 m. Iris Bay office building, United Arab Emirates Contractors: Al Habtoor Engineering
402
Doka Load-bearing Systems | Shoring towers | Load-bearing tower d2
Tough and cost-effective in day-to-day use Load-bearing tower d2 scores for its high load capacity, the speed with which it can be erected, and its broad spectrum of application in e.g. the bridge-building, high-rise and industrial construction fields.
Highly versatile thanks to its modular system concept Easy to adapt to widely differing shoring-tasks, because • the inter-frame spacing can be varied to provide the necessary load-bearing capacity • the system can be exactly adapted to any length, width and height • it is easy to combine with all Doka floor-slab systems
Easy handling for efficient working Shorter labour times, because Load-bearing tower d2
• there are only a small number of different parts • it is easy to vertically stack the basic frames • of the logical erection procedure, for which no tools are needed
By using different lengths of diagonal braces, the spacing of the d2 frames can be adjusted to provide exactly the required loading capacity.
403
Load-bearing tower d2 | Shoring towers | Doka Load-bearing Systems
References
During construction of the Unicorp headquarters building in Bahrain, the floor-slab above the spacious foyer was costeffectively shored with d2 load-bearing towers. The straightforward erection procedure and short repositioning times made for rapid construction progress here. Unicorp Headquarters, Bahrain
404
Load-bearing tower d2
Doka Load-bearing Systems | Shoring towers | Load-bearing tower d2
The sturdy Load-bearing tower d2 was used as a high-load falsework for the bridge superstructure formwork on this flyover at the Rheinfelden customs zone, on the Swiss/German border. Flyover at customs zone on routes N3/015 and 017, Switzerland Contractors: Meier and Jäggi
405
Load-bearing tower d2 | Shoring towers | Doka Load-bearing Systems
Article list [kg]
Article n°
[kg]
Article n°
3.1 4.1 5.2 5.7 6.1 6.6 8.0 9.0 4.2 4.6 5.7 6.1 6.3 6.9 8.3 9.3 6.1 6.9 7.3 7.8 7.8 9.1 10.3
582322000 582772000 582773000 582627000 582334000 582774000 582775000 582323000 582324000 582610000 582612000 582628000 582335000 582614000 582616000 582325000 582620000 582622000 582629000 582336000 582624000 582626000 582326000
Doka Load-bearing Load-bearing tower Systems d2
Basic frame d2 0.90m Basic frame d2 1.20m Basic frame d2 1.80m
21.0 582703000 24.1 582701000 32.8 582702000
Grundrahmen d2
Galvanised
Coupler
0.57 582527000
Kupplungsstück Galvanised Height: 27 cm
Spring locked connecting pin 16mm Federbolzen 16mm
Diagonal cross 9.060 Diagonal cross 9.100 Diagonal cross 9.150 Diagonal cross 9.165 Diagonal cross 9.175 Diagonal cross 9.200 Diagonal cross 9.250 Diagonal cross 9.300 Diagonal cross 12.060 Diagonal cross 12.100 Diagonal cross 12.150 Diagonal cross 12.165 Diagonal cross 12.175 Diagonal cross 12.200 Diagonal cross 12.250 Diagonal cross 12.300 Diagonal cross 18.100 Diagonal cross 18.150 Diagonal cross 18.165 Diagonal cross 18.175 Diagonal cross 18.200 Diagonal cross 18.250 Diagonal cross 18.300 Diagonalkreuz
Galvanised Delivery condition: folded closed
0.25 582528000
Galvanised Length: 15 cm
Horizontal brace d2 100 Horizontal brace d2 125 Horizontal brace d2 152 Horizontal brace d2 175 Horizontal brace d2 200 Horizontal brace d2 225 Horizontal brace d2 250 Horizontalstrebe d2
1.6 1.9 2.3 2.7 3.0 3.4 3.8
582730000 582731000 582732000 582733000 582734000 582735000 582736000
2.0 2.2 2.6 3.0 3.3 5.9 6.8 2.2 2.5 2.9 3.1 3.5 6.0 6.7 3.0 3.3 5.8 6.1 6.4 6.9 7.4
582740000 582741000 582742000 582743000 582744000 582745000 582746000 582712000 582713000 582714000 582715000 582716000 582717000 582718000 582720000 582721000 582722000 582723000 582724000 582725000 582726000
4-way screw-jack head
10.4 582638000
Vierwegkopfspindel
Galvanised Height: 86 cm
Galvanised
Diagonal brace d2 9.100 Diagonal brace d2 9.125 Diagonal brace d2 9.152 Diagonal brace d2 9.175 Diagonal brace d2 9.200 Diagonal brace d2 9.225 Diagonal brace d2 9.250 Diagonal brace d2 12.100 Diagonal brace d2 12.125 Diagonal brace d2 12.152 Diagonal brace d2 12.175 Diagonal brace d2 12.200 Diagonal brace d2 12.225 Diagonal brace d2 12.250 Diagonal brace d2 18.100 Diagonal brace d2 18.125 Diagonal brace d2 18.152 Diagonal brace d2 18.175 Diagonal brace d2 18.200 Diagonal brace d2 18.225 Diagonal brace d2 18.250 Diagonalstrebe d2
Screw jack U-head
9.2 582636000
Kopfspindel
Galvanised Height: 74 cm
Heavy duty screw jack 70 top Lastspindel 70 oben
9.2 582327000
Height: 106 cm
Galvanised
U-head D
6.7 582709000
Gabelkopf D Galvanised Length: 20 cm Width: 22 cm Height: 37 cm
406
Doka Load-bearing Systems | Shoring towers | Load-bearing tower d2
[kg] Clamping plate for U-head
Article n°
2.0 502709030
Klemmplatte für Gabelkopf
[kg] Heavy duty screw jack 130
Wing nut 15.0
13.0 582711000
Lastspindel 130
Galvanised Length: 24 cm Width: 9 cm
Article n°
Galvanised Height: 173 cm
0.31 581961000
Flügelmutter 15,0 Galvanised Length: 10 cm Height: 5 cm Width-across: 27 mm
Locking rod 15.0 330mm
0.48 582641000
Quetschteil 15,0
Galvanised Width-across: 24 mm
Split nut B
2.0 582634000
Spannmutter B Galvanised Staxo-Spindelanschluss Dokamatic-Tisch Galvanised Length: 20.7 cm
3.9 582347000
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Wedge for screw jack ..... %
Galvanised Length: 75.5 cm
0.46 176071000
Spindelkeil ..... %
Length: 20 cm Width: 16 cm
Staxo wedge support WS10
8.7 582796000
Staxo-Keilauflager WS10
Galvanised Length: 31 cm Width: 15 cm Height: 23 cm
Swivel bearing plate for screw jack U-head Gelenkaufsatz Kopfspindel
Aluminium
5.2 582799000
9.0 582637000
Fußspindel
4.2 582630000 7.5 582632000 9.7 582633000
Montagebelag
Galvanised Length: 20.8 cm Width: 15.0 cm Height: 14.4 cm
Screw jack foot
Assembly batten 40/100cm Assembly batten 40/200cm Assembly batten 40/250cm
Galvanised Height: 69 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Galvanised
Heavy duty screw jack 70
8.8 582639000
Lastspindel 70
Galvanised Height: 101 cm
Screw-on coupler 48mm 50 Screw-on coupler 48mm 95
0.84 682002000 0.71 586013000
Anschraubkupplung
Galvanised Width-across: 22 mm
407
Load-bearing tower d2
Dokamatic table Staxo spindle connector
Load-bearing tower d2 | Shoring towers | Doka Load-bearing Systems
[kg] Swivel coupler 48mm
Article n°
1.5 582560000
Drehkupplung 48mm
[kg] Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
Galvanised Width-across: 22 mm
Normal coupler 48mm
Article n°
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Transition swivel coupler 48/60mm
Übergangsdrehkupplung 48/60mm Galvanised Width-across: 22 mm
Galvanised Height: 7 cm
1.5 582561000
Lifting rod 15.0
1.9 586074000
Umsetzstab 15,0
Transition angle coupler 48/60mm
Übergangsnormalkupplung 48/60mm Galvanised Width-across: 22 mm
Painted blue Height: 57 cm Follow the directions in the "Operating Instructions"!
1.6 582562000
Retaining plate 15.0
1.8 586073000
Jochplatte 15,0
Pin coupling 60mm
Galvanised Length: 17 cm Width: 12 cm Height: 11 cm
1.0 582546000
Zapfenkupplung 60mm
Galvanised Width-across: 22 mm
Bracing for load-bearing towers Abspannung für Traggerüste
Brace stirrup 8
Galvanised Painted blue
2.7 582751000
Spannbügel 8
11.6 582795000
Galvanised Width: 19 cm Height: 46 cm Width-across: 30 mm
Rafter plate right Rafter plate left
0.09 582521000 0.09 582522000
Sparrenpfettenanker
Spindle connecting plate T
Galvanised Length: 17 cm
Handrail post 1.50m
3.1 584371000
Spindellasche T
Galvanised Width: 20 cm Height: 25 cm
12.4 582754000
Geländer 1,50m
Galvanised
Universal plug R20/25
0.003 588180000
Kombi Ankerstopfen R20/25 Blue Diameter: 3 cm
408
Doka Load-bearing Systems | Shoring towers | Load-bearing tower d2
[kg] Winch 70
Article n°
31.0 582779000
Zahnstangenwinde 70
[kg] Shifting carriage TG
168.0 582778000
Hubwagen TG
Galvanised Length: 99 cm Width: 152 cm Height: 148 cm Follow the directions in the "Operating Instructions"!
Painted blue Height: 126 cm Follow the directions in the "Operating Instructions"!
63.8 582780000
Zahnstangenwinde 125
Painted blue Height: 189 cm Follow the directions in the "Operating Instructions"!
Staxo/d2 adapter frame
14.1 582781000
Staxo/d2-Adapter
Fork lift shifting device TG
83.0 582797000
Umsetzgerät TG für Stapler
Galvanised Length: 60 cm Width: 113 cm Height: 52 cm Follow the directions in the "Operating Instructions"!
Multi-purpose waling WS10 Top50 2.00m
38.9 580007000
Connecting pin 10cm
0.34 580201000
Mehrzweckriegel WS10 Top50 2,00m Painted blue
Painted blue Length: 37 cm Width: 36 cm Height: 36 cm
Solid tire wheel
34.5 582573000
Vollelastikrad
Verbindungsbolzen 10cm
Painted blue Height: 45 cm
Heavy duty wheel 15kN
Galvanised Length: 14 cm
33.0 582575000
Schwerlastrad 15kN
Spring cotter 5mm
0.05 580204000
Federvorstecker 5mm
Galvanised Length: 13 cm
Painted blue Height: 41 cm
Fix-De-Fix remote uncoupling system 3150kg Double wheeled transporter
5.0 582558000
Zweirad-Transportroller
Painted blue Width: 57 cm
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
409
Load-bearing tower d2
Winch 125
Article n°
Load-bearing tower d2 | Shoring towers | Doka Load-bearing Systems
[kg] Doka floor prop Eurex 60 550 Doka-Deckenstütze Eurex 60 550
Article n°
47.0 582650000
[kg] Plumbing strut Eurex 60 550
Extension Eurex 60 2.00m
42.5 582658000
Justierstütze Eurex 60 550
Aluminium Height: 345 - 555 cm
Article n°
Powder-coated, blue Aluminium Length: 343 - 553 cm
18.0 582651000
Verlängerung Eurex 60 2,00m
Powder-coated, blue Aluminium Length: 250 cm
Prop head Eurex 60 Top50
7.1 582665000
Stützenkopf Eurex 60 Top50
Galvanised Height: 50 cm
Connector Eurex 60
3.9 582657000
Verbindungsstück Eurex 60 Galvanised Length: 15 cm Width: 15 cm Height: 30 cm
Coupler Eurex 60
8.6 582652000
Kupplungsstück Eurex 60
Plumbing strut shoe Eurex 60
Aluminium Length: 100 cm Diameter: 12.8 cm
U-head Eurex 60
Justierstützenfuß Eurex 60
Galvanised Length: 31 cm Width: 12 cm Height: 33 cm
2.9 582656000
Gabelkopf Eurex 60
Swivel coupler 48mm Eurex 60
Galvanised Length: 22 cm Width: 20 cm Height: 12 cm
4-way head Eurex 60
Drehkupplung 48mm Eurex 60
Galvanised Width-across: 22 mm
4.5 582655000
Vierwegkopf Eurex 60
Galvanised Length: 25 cm Width: 21 cm Height: 21 cm
410
8.5 582660000
1.0 582654000
Doka Load-bearing Systems | Shoring towers | Load-bearing tower d2
[kg] Plumbing strut 340 for precast members Justierstütze 340 für Fertigteile
Article n°
18.2 588296000
[kg] Doka stacking pallet 1.55x0.85m Doka-Stapelpalette 1,55x0,85m
Galvanised Length: 190 - 341 cm
33.6 586168000
Anklemm-Radsatz B Justierstütze 540 für Fertigteile
42.0 586151000
Galvanised Height: 77 cm Follow the directions in the "Operating Instructions"!
Bolt-on castor set B Plumbing strut 540 for precast members
Article n°
Painted blue
33.3 588297000
Galvanised Length: 309 - 550 cm
Doka Safety Systems
Removable folding tripod 1.20m Stützbein 1,20m
Load-bearing tower d2
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
20.7 586145000
Galvanised Height: 120 cm Delivery condition: folded closed
Lashing strap 5.00m
2.8 586018000
Zurrgurt 5,00m
Yellow
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
411
Tunnel formwork Load-bearing tower SL-1 | Tunnel formwork | Doka Load-bearing Systems
Heavy-duty supporting system SL-1 The fast, cost-saving solution for tunnel-building
Two hydraulic Doka tunnel formwork travellers were in action on the building of the 1,600 m long Radfeld Mitte railway tunnel. With them, the 160 sections of this cut-and-cover tunnel were cast using the alternating sequential method. “H2-2 Radfeld Mitte” tunnel, Austria Contractors: Strabag
412
Doka Load-bearing Systems | Tunnel formwork | Load-bearing tower SL-1
The flexible all-in-one solution for the civil-engineering field The modularly designed Doka heavy-duty supporting system SL-1 makes it possible to form widely varying tunnel cross-sections in a cost-efficient way, irrespective of the shapes and loads involved.
Highly cost-efficient thanks to its flexible modular system Ensures efficient forming operations on every tunnel project, as • all system components can be rented • the system beams, walings and struts can be arranged in variable configurations, enabling optimum use to be made of each item of equipment • it is 100 % compatible with Large-area formwork Top 50
Load-bearing tower SL-1
• it is exactly planned by Doka tunnel experts to ensure streamlined forming
Rapid working right from the outset Optimised all-in-one concept for swift construction progress, thanks to • pre-assembly of the formwork and heavy-duty supporting-unit components, for short on-site erection times • fewer form-tie points as Multi-purpose walings WU 16 and Form-ties 20 are used • short repositioning times, achieved by the all-hydraulic formwork solutions • easier working conditions, thanks to the wide spacing between the parallel girderframe units, and the heavy-duty telescopic screw-jack system
Ladder system XS
Stringent safety standards thanks to the ingenious system logic
Stair tower
For reliable protection at your site, achieved by • integrated working platforms and ladderways • detailed assembly and utilisation planning
Execution of (shell) construction work
• safe travelling even on steep longitudinal and transverse gradients • tried-and-tested, pre-dimensioned system design • CE marking Doka tunnel formwork systems
413
Load-bearing tower SL-1 | Tunnel formwork | Doka Load-bearing Systems
References An SL-1-based, three-part tunnel slab traveller was used to construct an emergency ventilation cavern in the Wienerwald Railway Tunnel outside Vienna. Its modular design concept made it possible to adapt it very precisely to the complex geometry of this structure. Emergency ventilation cavern in Wienerwald Railway Tunnel, Austria Contractors: “ARGE Wienerwald” consortium
The 233 m long AVE Mondragón high-speed rail tunnel is being constructed with a rentable SL-1 tunnel formwork traveller fitted with Large-area formwork Top 50, in 20 casting sections. Using this highly efficient comprehensive Doka solution, the contracting consortium is achieving a three-day cycle for the 12 m long sections. AVE Mondragón tunnel, Spain Contractors: UTE AVE Mondragón
414
Doka Load-bearing Systems | Tunnel formwork | Load-bearing tower SL-1
On the City Tunnel project in Leipzig, the Heavy-duty supporting system SL-1 was used both as quickly resettable heavy-duty shoring and as a two-part tunnel slab traveller.
Load-bearing tower SL-1
City Tunnel, Leipzig, Germany Contractors: DYWIDAG, Alpine, Oevermann, Universale, Strabag
With its high load capacity and its ability to adapt flexibly to widely differing crosssections, the Heavy-duty supporting system SL-1 is extremely versatile. The formwork set-up and striking procedure is carried out by a powerful hydraulic system at the push of a button. Brenner Railway, H4-3 Stans, Austria Contractors: Alpine
415
Bridge formwork Composite forming carriage | Bridge formwork | Doka Load-bearing Systems
Composite forming carriage The perfect solution, all from one supplier
The composite forming carriage combines maximum cost efficiency, low dead weight and high workplace safety into a high-performing all-in-one solution. Railway bridge over the River Sado, Portugal Contractors: Teixeira Duarte
416
Doka Load-bearing Systems | Bridge formwork | Composite forming carriage
The right concept for every requirement The Doka composite forming carriage scores top marks for its huge versatility, the speed with which it can be assembled from rentable standard components, and its high level of workplace safety.
Reduced costs due to the use of rentable standard components Fast, safe casting of deck slabs, thanks to the system’s • small number of versatile, combinable component parts • ease of assembly • fast formwork set-up and removal • high safety standards for rapid working
Ease of handling Composite forming carriage
for a smooth construction workflow Superlative efficiency on your site, achieved by • low dead weight and high load capacity • pouring in a weekly cycle • travelling the entire unit in one piece • adaptability to slender structures as well
Comprehensive tailor-made solutions for widely differing shapes of bridge Doka offers you a “one-stop shop” to plan and supply • high-calibre solutions for all steel composite bridges • forming carriages, shoring towers and working platforms all designed to work together as a seamless whole
Doka bridge formwork
417
Composite forming carriage | Bridge formwork | Doka Load-bearing Systems
System Simple system-grid In the longitudinal direction of the bridge, the increment-grid of the Doka composite forming carriage is dictated by a 5 m long and 2 m high longitudinal girder. In the transverse direction, two transverse frameworks joined by an adjustment zone (compensation girders) permit any desired dimension. The adjustable spindle struts, and the large number of bolting positions in the steel girders, together make for optimum adaptability of the composite forming carriage.
Safety on the structure With its suspended finishingwork platform levels, the Doka composite forming carriage provides a high standard of safety. Only a few extra scaffolding tubes are needed to create the ideal framework for an all-round enclosure. • Telescopic suspended railing • Handrail clamp S • Handrail clamp T • Handrail post 1.10m • Crew can be sheltered from weather by an all-round enclosure
418
Doka Load-bearing Systems | Bridge formwork | Composite forming carriage
Roller support for inside formwork
Unlimited adjustability options
• for forward-jacking the inside formwork using the “roller-drawer principle”
• cantilever arm formwork can be adjusted in all directions by means of spindle struts • formwork is easy to set up and strip, using a 2-part anchoring system
Formwork systems for composite bridge-decks Overslung composite forming carriage
Underslung composite forming carriage
This, the standard type of carriage, is a fast and safe way of constructing the concrete decking of composite bridges (on steel superstructures).
By providing barrier-free access to the entire roadway deck, this type of carriage ensures a high standard of safety, especially on wide bridge cross-sections with diagonal struts.
Crane-shiftable bracket solution
Cost-saving custom solutions
For shorter superstructures and medium-length bridges involving only a few repositioning cycles, a crane-shiftable formwork is available.
On request, the Doka Formwork Experts will also plan and design constructions for situations where space is severely limited, or for unusual cross-sections.
419
Composite forming carriage
No Content !!
Composite forming carriage | Bridge formwork | Doka Load-bearing Systems
References The 28 casting sections for the carriageway slabs of the Vesterstraumen and Austerstraumen Bridges were poured using two composite forming carriages in an irregular “back-step” sequence. The weekly cycle achieved here made it possible to complete the project on time. Vesterstraumen & Austerstraumen Bridges, Norway Contractors: Mesta
To cast the deck slab of this motorway overpass near Kösten in Bavaria, it was decided to use an overslung composite forming carriage positioned at an angle to the structure axis because of the complex geometry. With its combination of maximum adaptability and a high proportion of rentable components, this solution helped construction to proceed economically. Overpass near Kösten, Germany Contractors: RAAB Baugesellschaft
420
Doka Load-bearing Systems | Bridge formwork | Composite forming carriage
Because of the diagonal V struts in the inner cantileverarm zone of the steel construction, the deck slab of the Jablunkov Bridge was cast using an underslung composite forming carriage. This carriage also dealt smoothly with a considerable broadening in the cross-section.
Composite forming carriage
Jablunkov bypass, Czech Republic Contractors: Alpine
The broad deck slab of the arched bridge across the Örekilsälven River was constructed swiftly and costeffectively by two composite forming carriages, in 32 casting sections sequenced in an irregular “back-step” pattern. Bridge across Örekilsälven River Contractors: NCC Construction Sverige
421
Cantilever forming traveller | Bridge formwork | Doka Load-bearing Systems
Cantilever forming traveller Formwork and shoring from one single supplier
The 365 m long bridge over the River Danube at Traismauer in Austria was constructed in 118 casting sections by two pairs of cantilever forming travellers working in a weekly cycle. The CFT’s modular design concept, based on rentable standard components, and its optimised ergonomic design together ensured swift and cost-effective construction progress. Danube bridge at Traismauer, Austria Contractors: Alpine
422
Doka Load-bearing Systems | Bridge formwork | Cantilever forming traveller
The cost-saving all-in-one solution The Doka cantilever forming traveller provides certainty regarding planning and costs while ensuring an optimum construction workflow.
Modular design concept based on rentable system components for flexible adaptation to • straight, sloping and multi-cell box girder cross-sections • differing inside and outside box-girder dimensions • non-uniformly dimensioned bottom slabs • cantilever slabs of varying inclinations and sizes
Guaranteed to be more cost-efficient as it is a perfectly harmonised all-in-one solution
Cantilever forming traveller
High cost-certainty • because the equipment is rentable, so no pre-financing is needed • because the system components are available very quickly, meaning short delivery times • because you do not need to maintain and store formwork equipment of your own, as the system is rentable • because the use of standard system components means highly efficient planning
Smooth project progress with no time-wasting, costly downtimes Greater efficiency, as • the planning interface with the designer of the superstructure is optimised • both the CFT and the formwork are from the same single-source supplier • there is an optimum design match between the traveller and the formwork
High level of ergonomic engineering combined with a controlled construction sequence Faster working is ensured by • the ergonomically optimised access to all work-zones • the ingeniously thought-out solutions for making work easier, right down to the last detail • bracing located on the outside to make it easier to lift in the reinforcement steel
CE tested
• optimum working conditions, thanks to raised longitudinal truss
Exceedingly high active and passive safety in every phase of the work Doka bridge formwork
Site crew are given maximum protection, by • fully railed-in working platforms on all levels • integrated ladders, complete with ladder-cages • the safety feature which self-locks the CFT while it is being advanced on sliding plates 423
Cantilever forming traveller | Bridge formwork | Doka Load-bearing Systems
System Optimised longitudinal trusses • innovative geometry in the shape of upward-extended parallelograms • for roomy, easy-to-get-at workplaces in the cover-slab and cantilever-arm formwork zones • with an integral ladderway and catwalk
Versatile anchoring cross-beam • The suspension rods can be positioned anywhere along the beam, providing maximum horizontal flexibility • Asymmetrical cross-beam configurations are possible where space is constricted due to e.g. neighbouring structures • Broad working platform from which the suspension rods can be operated safely • Pre-assembly, including of the platforms, is possible at ground level
Modular design concept The longitudinal trusses can be variably positioned, which makes it easy to adapt the cantilever forming traveller to variable-width or multi-cell cross-sections.
424
Doka Load-bearing Systems | Bridge formwork | Cantilever forming traveller
No Content !!
Pre-assembled platform system • with integrated ladderways complete with ladder cages and self-locking manholes • on all work-deck levels
Cantilever forming traveller
• generously sized workplace access routes for safe, efficient working
Innovative drive unit
Bracing located on outside
• permanent self-locking safety feature to guard against unwanted travelling, effective up to a 6 % longitudinal gradient
makes it easier and quicker to place reinforcement steel and concrete
• incorrect operation of this safety feature is impossible
425
Cantilever forming traveller | Bridge formwork | Doka Load-bearing Systems
References With the newly developed cantilever forming traveller, the 6 m long deck segments of the Viaducto de Teror are being cast in a weekly cycle. The pier-heads on this technically challenging bridge project were also cast using the CFT. Viaducto de Teror, Spain Contractors: Comsa & OAC
The perfect match between the traveller and the formwork, the high standard of safety and the optimised ergonomic design all performed convincingly during construction of this bridge across the River Elbe near Litomerice. Prosmyky Bridge over the River Elbe, Czech Republic Contractors: JV of SMP & Metrostav
426
Doka Load-bearing Systems | Bridge formwork | Cantilever forming traveller
The superstructure deck of Viaducto 5 has a longitudinal gradient of 6 percent. Even under these extreme conditions, safe shifting of the CFT is ensured by the permanent self-locking safety feature, which prevents any undesired travelling motion.
Cantilever forming traveller
Viaducto 5, Spain Contractors: UTE Guia-Pagador
The various differently sized superstructures of this bridge over the River Vltava were cost-efficiently constructed using the highly adaptable cantilever forming traveller. Bridge over River Vltava, Czech Republic Contractors: Skanska
427
Bridge edge beam formwork T | Bridge formwork | Doka Load-bearing Systems
Bridge edge beam formwork T The fast manual bridge edge beam formwork
On short bridges or bridge decks with tight radii, Bridge edge beam formwork T scores for its great cost efficiency and ease of assembly. Motorway slip-road to Brunn-am-Gebirge Business Park, Austria
428
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T
Straightforward basic design – maximum cost efficiency Bridge edge beam formwork T is made up of a very small number of different parts. Its high load-bearing capacity and low dead weight make it a convincing solution.
Great flexibility for optimum adaptability to widely differing cantilevered parapets Simple and quick to adjust, thanks to • the generously dimensioned adjusting range of the Bridge edge beam bracket • the continuous, last-millimetre height-adjustability of the Bridge edge beam support
High efficiency for fast construction progress Bridge edge beam formwork T
Used most efficiently on • shorter superstructures • medium-length bridges with a small number of repositioning cycles • bridges with tight radii and complicated cross-sections
Very great horizontal and vertical flexibility is what sets the easy-to-handle Bridge edge beam formwork T apart.
15°
15°
Type-tested formwork system
10°
22°
Doka bridge formwork
429
Bridge edge beam formwork T | Bridge formwork | Doka Load-bearing Systems
References
430
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T
The straightforward Bridge edge beam formwork T ensures efficient forming operations on medium-length bridge superstructures with a small number of repositioning cycles.
Bridge edge beam formwork T
Valley crossing at Gastwein, Austria Contractors: ARGE Ingenieurbau PPP Ostregion
During rehabilitation work on this bridge across the River Salzach, the quick-attachment feature of Bridge edge beam formwork T made it possible to scaffold the whole superstructure quickly and safely. Rehabilitation of bridge over River Salzach at Hollersbach, Austria Contractors: Alpine
431
Bridge edge beam formwork T | Bridge formwork | Doka Load-bearing Systems
Article list [kg]
Article n°
[kg]
Article n°
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Doka Load-bearing Bridge edge beam formwork Systems T
Bridge edge beam bracket T 0.80m Gesimskonsole T 0,80m
22.0 584330000
Galvanised Length: 99 cm Height: 80 cm
Bridge edge beam support T 1.40m Gesimsträger T 1,40m
13.3 584331000
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
Galvanised
Galvanised Delivery condition: folded closed
Scaffold tube connection
0.27 584375000
Gerüstrohranschluss
Bridge edge beam clamp T 0.40m Gesimszwinge T 0,40m
Galvanised Height: 7 cm
10.1 584332000
Galvanised Height: 104 cm
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
Bracket support T
17.5 584372000
Konsolträger T
Bridge edge beam support extension T 0.20m Einschubträger T 0,20m
Galvanised Width: 44 cm Height: 85 cm
2.9 584333000
Galvanised Length: 45 cm
Bridge edge beam waling T 2.70m Gesimsbühne T 2,70m
35.5 584334000
Galvanised Length: 285 cm Delivery condition: folded closed
Handrail post 1.00m
3.8 584335000
Geländer 1,00m
Galvanised Length: 124 cm
Waling connecting plate T
5.5 584370000
Riegellasche T
Galvanised Width: 12 cm Height: 37 cm
Spindle connecting plate T
3.1 584371000
Spindellasche T
Galvanised Width: 20 cm Height: 25 cm
Handrail post T 1.80m
17.7 584373000
Einschubgeländer T 1,80m Galvanised
432
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T
[kg] Collar-mount 21 Collar-mount 25
Article n°
[kg]
Article n°
0.39 584365000 0.36 584364000
Gesimshülse
Galvanised Diameter: 6 cm
Reversible ratchet 1/2"
0.73 580580000
Umschaltknarre 1/2"
Extension 11cm 1/2"
0.20 580581000
Box nut 30 1/2"
0.20 580575000
Screw-in cone 30kN 15.0
0.74 581895000
Verlängerung 11cm 1/2"
Stecknuss 30 1/2"
Einschraubkonus 30kN 15,0
Bridge edge beam formwork T
Galvanised Length: 30 cm
Galvanised Length: 15 cm
Bridge edge beam anchor 30kN 15.0 Bridge edge beam anchor 30kN 15.0 galv. Gesimsanker 30kN 15,0
0.45 581896000 0.44 581890000
Length: 7 cm Follow fitting instructions!
Nailing cone 15.0
0.02 581897000
Nagelkonus 15,0
Black Length: 7 cm
Hole plug 29mm
0.003 581891000
Gesimsankerstopfen 29mm Grey Diameter: 3 cm
Zinc plug 15.0 Zinkstöpsel 15,0
0.20 581889000 Galvanised Length: 9.9 cm Diameter: 2.9 cm Tool: Spanner for 1/2" square head
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
433
Forming wagon T | Bridge formwork | Doka Load-bearing Systems
Forming wagon T The site-ready, travelling bridge edge beam formwork
The Forming wagon T features very high flexibility and can readily be adjusted to widely differing site situations. Dultenaugraben viaduct, Germany Contractors: Hochtief
434
Doka Load-bearing Systems | Bridge formwork | Forming wagon T
High degree of pre-assembly and easy repositioning Combined with a pre-assembled parapet formwork that can be cycled without being dismantled, the travelling Forming wagon T is designed for maximum cost efficiency.
Maximum cost effectiveness in the casting of cantilevered parapets Ensures efficient, fast construction progress, in a daily rhythm • on longer bridge superstructures • for higher numbers of repeat uses • for “section-at-a-time” repositioning cycles • on bridge superstructures where it is not possible to suspend formwork from under the cantilever slab • for rehabilitating existing bridge superstructures • on bridges with wide radii
Wide range of uses Forming wagon T
One system, several utilisations Maximum flexibility, as it can be used as a • forming carriage or • demolition wagon
Simplifies the site logistics with its ingenious system concept For on-time, on-budget project implementation, thanks to • the high degree of pre-assembly of the long-lived, galvanised load-bearing construction • the fast erection and dismantling times • short repositioning times • the small amount of storage space needed
The Forming wagon T’s high degree of pre-assembly simplifies the site logistics and reduces the rental costs.
Doka bridge formwork
435
Forming wagon T | Bridge formwork | Doka Load-bearing Systems
References
The speed with which the high-load Forming wagon T can be travelled, and its easy formwork set-up and striking procedure, allowed work to move ahead very quickly here on the Ruhr Valley Bridge. Ruhr Valley Bridge, Germany Contractors: B. Köthenbürger - Krutmann
436
Forming wagon T
Doka Load-bearing Systems | Bridge formwork | Forming wagon T
The geometrically challenging edge beams of the Haselbachtal Bridge were cast very cost-efficiently using the flexibly adjustable Forming wagon T. The extra-high guard rails provide optimum protection on the site. Haselbachtal Bridge, Germany Contractors: Walter Bau
437
Forming wagon T | Bridge formwork | Doka Load-bearing Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Load-bearing Forming wagon T Systems
Bogie for forming wagon TS
936.0 584336000
(A) Horizontal frame for forming wagon T (B) Vertical frame for forming wagon T (C) Frame strut for forming wagon T
505.0 584337000 177.0 584338000 13.5 584339000
Grundgestell Schalwagen TS consisting of:
Spindle strut T7 150/200cm
21.6 584324000
Spindelstrebe T7 150/200cm
Galvanised
2 pcs.
(D) Spindle strut GS T6 95/140cm
10.3 584340000
2 pcs. Galvanised
(E) Flanged wheel T
51.0 584341000
4 pcs. Galvanised Length: 330 cm Width: 229 cm Height: 214 cm Delivery condition: folded closed
Spindle strut GS T7 109/166cm Spindelstrebe GS T7 109/166cm
21.6 584345000
Galvanised
Double jib for forming wagon T
357.0 584342000
(A) Jib frame for forming wagon T (B) Jib slide for forming wagon T
295.0 584343000 63.0 584344000
Ausleger Schalwagen T consisting of:
Galvanised Length: 64.4-102.2 cm Galvanised Length: 580 cm Height: 127 cm
Spindle strut T6 73/110cm
10.2 584355000
Spindelstrebe T6 73/110cm
Galvanised
Spindle strut T7 75/110cm
13.2 584308000
Spindelstrebe T7 75/110cm
Galvanised
Spindle strut T6 100/150cm
12.5 584323000
Spindelstrebe T6 100/150cm
Galvanised
Spindle strut T7 100/150cm
16.8 584309000
Spindelstrebe T7 100/150cm
Galvanised
Pressure prop T
37.7 584349000
Druckstütze T
Galvanised Height: 194 cm
438
Doka Load-bearing Systems | Bridge formwork | Forming wagon T
[kg] Suspension beam for forming wagon T Hängeträger Schalwagen T
Article n°
175.0 584346000
[kg] Platform extension plate T
Article n°
24.0 584362000
Bühnenverbreiterung T
Galvanised Width: 95 cm Height: 36 cm Delivery condition: cable coiled
Galvanised Height: 352 cm
Longitudinal beam for forming wagon T
36.0 584351000
Längsträger Schalwagen T
Galvanised Length: 301 cm
Handrail lengthening piece T 1.00m Geländerverlängerung T 1,00m
9.8 584363000
Galvanised
Fertigbühne Schalwagen T
347.5 584347000
Timber parts varnished yellow Steel parts galvanised Length: 490 cm Width: 170 cm
Railing strut for forming wagon T Geländerstreben Schalwagen T
Stabilising plate T
2.5 584367000
Stabilisierungslasche T Galvanised Length: 13 cm Width: 12 cm Height: 8 cm
18.0 584348000
Slinging plate T
8.3 584368000
Anhängelasche T Galvanised Height: 300 cm Delivery condition: folded closed
Galvanised Length: 28 cm Width: 14 cm Height: 8 cm
Attachable platform support T Bühnenauflage T
2.5 584369000
Galvanised Length: 12.6 cm Width: 11 cm Height: 29.6 cm
Handrail post T 0.70m
2.8 584353000
Geländerholm T 0,70m
Hängeträgerverlängerung T 1,00m
86.0 584376000
Fertiggeländer T oben Steel parts galvanised Timber parts varnished yellow Length: 490 cm Height: 156 cm
Galvanised Length: 86.6 cm
Suspension beam extension T 1.00m
Railing T top
89.5 584361000
Galvanised Height: 143 cm
439
Forming wagon T
Ready-to-use platform for forming wagon T
Forming wagon T | Bridge formwork | Doka Load-bearing Systems
[kg] Railing T bottom
Article n°
98.0 584377000
Fertiggeländer T unten Steel parts galvanised Timber parts varnished yellow Length: 490 cm Height: 156 cm
Adjusting spindle T
17.1 584374000
Justierspindel T
Galvanised Height: 96 cm
Vertical extension rail T
107.0 584378000
Aufsatzgeländer T
Steel parts galvanised Timber parts varnished yellow Length: 490 cm Height: 120 cm
Adjusting device for forming wagon T
Justiereinrichtung für Schalwagen T Painted blue Height: 28.5-55.2 cm
22.9 584383000
Doka Safety Systems
You will find working and protection platforms, guardrail systems and access systems in the section headed "Doka Safety Systems".
440
[kg]
Article n°
Forming wagon T
Doka Load-bearing Systems | Bridge formwork | Forming wagon T
441
Forming wagon TU | Bridge formwork | Doka Load-bearing Systems
Forming wagon TU The underslung bridge edge beam formwork for fast forming of cantilevered parapets
The underslung Forming wagon TU stands out for its high cost effectiveness, huge adaptability and fast formwork set-up and striking routines. Pöpelholz Viaduct, Germany Contractors: DYWIDAG
442
Doka Load-bearing Systems | Bridge formwork | Forming wagon TU
Space-saving, extremely efficient and safe With the innovative Forming wagon TU, cantilevered parapets can be cost-efficiently cast without disrupting traffic or other construction operations.
Highly cost-efficient thanks to its ingenious all-in-one solution Streamlined forming operations are guaranteed: • rentable all-in-one system with pre-assembled working platforms and parallel girderframe units / forming elements • easy rebar and concrete placement operations from above • underslung constructional design • minimal disruption to traffic (e.g. during bridge rehabilitation) or to other construction operations when casting cantilevered parapets
Fast assignment times in a controlled sequence
Forming wagon TU
Higher efficiency and swift construction progress, as • the pre-assembled system units are very quick and easy to set up • the horizontal and vertical formwork are removed simultaneously, with a swivel/tilt motion • spindle struts are used for easy and accurate formwork set-up
A safe, sure way to work better in all phases of the forming assignment Site crew are given maximum protection, by • high standards of both active and passive safety • pre-mounted working platforms ready for immediate use • all-round scaffolding tubes for rugged side protection • a built-in gravity brake which prevents any unwanted travelling of the forming wagon
Doka bridge formwork
443
Forming wagon TU | Bridge formwork | Doka Load-bearing Systems
System Main areas of use • medium to long bridge superstructures • medium to high numbers of re-use cycles • “section-at-a-time” travelling • rehabilitation of existing bridge superstructures • cantilevered parapets with wide sidewalk spaces • curve radii of 250 m and above
Stringent safety standards • all-round, three-part side railings • completely gapless platform decking • separate working and erection platforms • built-in gravity brake secures the forming wagon against accidental travelling
444
Doka Load-bearing Systems | Bridge formwork | Forming wagon TU
No Content !!
Flexibly adjustable
Forming wagon TU
Thanks to the modular design concept of the load-bearing construction, and to the use of formwork elements assembled from Top 50 system components, just about any crosssection of cantilevered parapet can be accommodated.
Gravity brake
Easy to operate
• automatically activated by gravity
• high flexibility in terms of possible formwork configurations • high degree of pre-assembly • any type of suspension point can be used
445
Forming wagon TU | Bridge formwork | Doka Load-bearing Systems
References Two Forming wagons TU were used at the same time on the 306 m long Pöpelholz Viaduct. The forming and pouring operations were carried out on one Forming wagon TU, while the concrete of the cantilevered parapets was allowed to harden on the other Forming wagon TU. Pöpelholz Viaduct, Germany Contractors: DYWIDAG
On the Bibert Bridge in Zirndorf, Germany, the main challenge was the alternating curves, with their tight 250 m radii – a challenge that the Forming wagon TU rose to without any problems. Bibert Bridge, Zirndorf, Germany Contractors: Max Bögl
446
Doka Load-bearing Systems | Bridge formwork | Forming wagon TU
Reinforcing and pouringoperations made easy: On the “Hochbrücke Freimann” motorway overpass site in Munich, the Forming wagon TU scored highly for allowing unobstructed access to the workspace from above. This made it much easier to lift in the pre-assembled reinforcing cages, and enabled the pouring operations on the cantilevered parapets to move ahead very quickly.
Forming wagon TU
Hochbrücke Freimann motorway overpass, Germany Contractors: DYWIDAG
Both the outer parapets and the extremely constricted median parapets on the 310 m long Dorfbachtal Bridge were cast quickly and safely using the Forming wagon TU. Dorfbachtal Bridge, Germany Contractors: Bilfinger Berger & Max Früh
447
Doka Safety Systems
Doka Safety Systems Dependable safety for your site
448
Doka Safety Systems
Doka Safety Systems
Safety on the site is a very great responsibility for all those involved. As well as reducing accident risk, a professional approach to safety also delivers a number of other significant benefits which pay off for your company in terms of higher efficiency due to faster workflows, legal certainty, and the motivational boost given to employees and thus also to your corporate image.
Page Working and Protection Platforms Bracket platform M
450
Folding platform K
462
Platform system Xsafe plus
472
Guardrail systems Handrail posts & clamps
478
Sideguard system XP
484
Protection screens Protection screen Xclimb 60
488
Access Systems Stair tower
492
Ladder system XS
500
449
Working and Protection Platforms Bracket platform M | Working and Protection Platforms | Doka Safety Systems
Bracket platform M The lightweight, site-ready working platform, protection platform and sloping-rooftop fall barrier
2004 European Agency for Safety and Health at Work award winner.
450
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
Tested safety in masonry and pre-cast construction The Bracket platform M is a site-ready, lightweight working and protection platform that gives a big boost to safety in the field of masonry and pre-cast construction. The winner of an EU award, the Bracket platform M complies with both EN 12811-1 (for use as a working platform), and DIN 4420 (for use as a protection platform).
Tested safety for reliable protection Put the advantages of these EN 12811 certified Service and Working Scaffolds to work for you • high load-bearing capacity (max. 300 kg/m²) yet low dead weight • safe platform workdeck, as the crane-hoisting points can be lowered out of the way • safe corner transitions, thanks to Corner platform decking M • winner of Safety Award from the European Agency for Safety and Health at Work
Fast, safe working thanks to easy handling
Bracket platform M
Reduced labour and crane times, thanks to • pre-assembled units built from a small number of rugged system components • ready for use straight away, after a very few quick and easy actions • quick-connection feature for joining the bracket to the decking
Versatility thanks to standardised system solutions Depending on your needs, you can use these site-ready, lightweight platforms as • working platforms • protection platforms • or as sloping-rooftop fall barriers
Outstanding cost-efficiency on your project Achieves cost-optimisation by • having a long lifespan • not taking up much storage and transport space (over 200 lin.m of platforms fit in one truck trailer)
451
Bracket platform M | Working and Protection Platforms | Doka Safety Systems
System The Bracket platform M in detail • high load-bearing capacity of up to 300 kg/m² • quick-connection feature for joining the bracket to the decking • bracket weighs only 32 kg • long service life thanks to its sturdy design, varnished floor planking and galvanised steel construction • captive connectors • platform height can quickly be raised by 1 m
Suspension points The wide (2.50 m) centredistance between the brackets means that fewer suspension points are needed. The 3.00 m long platforms can be combined in any way desired, or used on their own for bridging gaps.
452
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
The Universal handrail lengthening piece M extends the operational range of the Bracket platform M so that it provides uninterrupted safety as a rooftop fall barrier.
Corner platform decking M The Corner platform decking M provides a safe “construction kit” corner transition. The whole unit can be quickly repositioned in just one crane cycle.
Corner transition M
Bridging openings
The planking unit can be used for both inside and outside corners.
The Platform decking M 3.00m can also be used for bridging openings and for closures, without having to be modified first.
Converting for use on pre-cast hollow walls
Suspension methods
The Precast member head M makes it easy to convert the Bracket platform M into a pouring platform for pre-cast hollow-wall members.
The Doka Suspension loop ES, for loop-type suspension points, complies with the rules of Load Class 4 to EN 12811-1 and DIN 4420-1.
453
Bracket platform M
Platform extension
Bracket platform M | Working and Protection Platforms | Doka Safety Systems
Utilisation Ease of handling The Bracket platform M cuts costs by being ready for operation in only a few simple steps: Tilt up the railings – fix the bracket – hang the platform into place – that’s it.
Areas of use
Working platform
Protection platform
Used as a working platform, e.g. on walls, the Bracket platform M makes for safe working thanks to its spacious width and close-meshed lattice railings.
DIN 4420-1 and ÖNORM B4007 compliant protection platforms B 4007. The Doka bracket platform M puts an end to the time-consuming and risky business of improvising protection platforms from separate brackets and planks.
454
Sloping-rooftop fall barrier
Fall-barrier safety scaffold
Combined with safety nets (mesh aperture max. 100 mm) and Universal handrail lengthening pieces M, the Bracket platform M can be used as a dependable sloping-rooftop fall barrier.
The Bracket platform M has a second drop-in rod on each bracket which enables it to be placed 1.00 m higher, e.g. to comply with regulations regarding the maximum drop distance to protection platforms.
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
Platform transport fork K/M
Logistics The planking units and platforms are stored and transported separately. This greatly reduces the transport volume and makes such good use of the loading area that 200 lin.m of platforms will fit inside one truck trailer.
455
Bracket platform M
The safe way of mounting and relocating the platform under roof-overhangs.
Bracket platform M | Working and Protection Platforms | Doka Safety Systems
References
The “Hotel H2O” has a massive 9,110 m² footprint. For its thermal spa resort alone, 15,000 m³ of concrete and 750 m³ of timber were used, and 1.2 million man-hours worked. Hotel H2O in Sebersdorf, Austria Contractors: “ARGE Freizeithotel H2O-Therme” consortium
456
Bracket platform M
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
Bracket platforms M were used to protect the crew during the construction work. The result is a unique hotel and spa resort with a high architectural level. Hotel H2O in Sebersdorf, Austria Contractors: “ARGE Freizeithotel H2O-Therme” consortium
457
Bracket platform M | Working and Protection Platforms | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Safety Bracket platform Systems M
Platform bracket M
33.6 580547000
Bühnenkonsole M
Corner platform strut M
13.3 580552000
Eckbühnenstrebe M
Galvanised Length: 136 cm Height: 230 cm
Galvanised Height: 232 cm
Support lengthening piece M Abstützverlängerung M
Platform decking M 3.00m
121.7 580548000
Bühnenbelag M 3,00m
Galvanised Height: 338 cm Delivery condition: folded closed
Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Pallet for platform brackets M Palette für Bühnenkonsolen M
74.9 580549000
Galvanised Length: 146 cm Width: 115 cm Height: 156 cm Follow the directions in the "Operating Instructions"!
Corner transition M 1.80m
77.9 580556000
Eckübergang M 1,80m
Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Suspension beam M
17.6 580572000
Einhängeträger M
Galvanised Height: 221 cm
Universal handrail lengthening piece M
Universal-Geländerverlängerung M Galvanised Height: 113 cm
Bracket railing post M 64.7 580550000
Eckbühnenbelag M
Timber parts varnished yellow Steel parts galvanised Length: 160 cm Width: 160 cm
Corner platform railing M
25.4 580551000
Eckbühnengeländer M
Galvanised Length: 177 cm Height: 123 cm
458
6.7 580560000
11.0 580554000
Konsolgeländerholm M
Corner platform decking M
33.7 580553000
Galvanised Height: 232 cm
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
[kg] Side handrail clamping unit T Seitenschutzgeländer T
Article n°
29.1 580488000
[kg] Tie rod wrench 15.0/20.0
1.9 580594000
Ankerstabschlüssel 15,0/20,0
Galvanised Length: 37 cm Diameter: 8 cm
Galvanised Length: 115 - 175 cm Height: 112 cm
Screw-in cone 30kN 15.0
0.74 581895000
Einschraubkonus 30kN 15,0
Suspension loop ES
Galvanised Length: 15 cm
1.0 580458000
Einhängeschlaufe ES
Article n°
Non-treated Length: 72 cm
Bridge edge beam anchor 30kN 15.0 Bridge edge beam anchor 30kN 15.0 galv. Gesimsanker 30kN 15,0
Suspension plate ES
Length: 7 cm Follow fitting instructions!
9.2 580493000
Aufhängeblech ES
0.45 581896000 0.44 581890000
Galvanised Length: 68 cm
Nailing cone 15.0
0.02 581897000
Nagelkonus 15,0
Corner suspension plate M
Black Length: 7 cm
19.0 580591000
Eckeinhängeblech M
Galvanised Length: 73 cm
7.0 580573000
Fertigteilkopf M
Bracket platform M
Precast member head M Galvanised Height: 55 cm
Suspension profile ES
15.3 580596000
Aufhängeprofil ES
Galvanised Length: 109 cm
Mounting sleeve M
0.09 580574000
Einbauhülse M
Suspension shoe M
Grey Length: 29 cm
4.3 580557000
Aufhängeschuh M
Galvanised Width: 15 cm Height: 18 cm
Plumbing strut 260 for precast members Justierstütze 260 für Fertigteile
Anchor bracket M
1.2 580558000
Ankerbügel M
13.9 588480000
Galvanised Length: 145 - 268 cm
Galvanised Width: 8 cm Height: 16 cm
Wall anchor M
1.5 580559000
Wandanker M
Galvanised Length: 80 cm
459
Bracket platform M | Working and Protection Platforms | Doka Safety Systems
[kg] Plumbing strut 340 for precast members Justierstütze 340 für Fertigteile
Article n°
18.2 588296000
[kg] Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised Length: 190 - 341 cm
Article n°
Galvanised Width-across: 22 mm
Doka 4-part chain 3.20m
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
Plumbing strut 540 for precast members Justierstütze 540 für Fertigteile
33.3 588297000
Galvanised Length: 309 - 550 cm
Fix-De-Fix remote uncoupling system 3150kg
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
0.009 588633000
Doka-Coil 16mm
Galvanised Diameter: 1.6 cm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
Galvanised
460
Bühnen-Umsetzgabel K/M
194.0 580492000 Painted blue Length: 205 - 262 cm Width: 210 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
Galvanised Length: 18 cm Follow fitting instructions!
Doka coil 16mm
Platform transport fork K/M
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Bracket platform M
Doka Safety Systems | Working and Protection Platforms | Bracket platform M
461
Folding platform K | Working and Protection Platforms | Doka Safety Systems
Folding platform K The pre-assembled scaffold platform for concrete construction sites
Folding platform K is a high-speed working platform, slopingrooftop fall barrier or protective canopy: To save space, it is delivered to the site folded-down. At the site, it is quickly swung open and safely hung into place by the crane in the prepared suspension points. Here, on the Perigrin office building, the Folding platform K is being used as all-round protection for an entire work level. Perigrin office building, Austria Contractors: JV of Liebbau and Strabag
462
Doka Safety Systems | Working and Protection Platforms | Folding platform K
A high-speed working platform, sloping-rooftop fall barrier and protective canopy all in one Doka folding platforms K are pre-assembled, work-ready scaffold platforms made up of standardised system components. They can be used both as EN 12811-1 compliant working platforms and as DIN 4420 compliant protection platforms.
Tested safety for reliable protection Put the advantages of these EN 12811 certified Service and Working Scaffolds to work for you • reduced costs, due to faster, safer working • extra-high load-bearing capacity (max. 600 kg/m²) means that wall formworks up to 5.50 m high can be stood on the platforms • the crane-hoisting points can be lowered out of the way to leave a flat, 1.80 m wide platform deck • the right safety solution for every situation
Folding platform K
Rapid working thanks to easy handling Reduced labour and crane times, thanks to • pre-assembled units • planning where to put the suspension points is easy, thanks to the system’s logical concept • ready for use straight away, after a very few quick and easy actions
Versatility can be used for all types of safety task Depending on your needs, you can use the pre-assembled scaffold platforms as • working platforms • protection platforms • sloping-rooftop fall barriers • protective canopies
Highly cost-efficient saving you time and money Achieves cost-optimisation by • being easy to use • having a long lifespan • not taking up much storage and transport space
463
Folding platform K | Working and Protection Platforms | Doka Safety Systems
System • Two different suspension methods and a wide range of accessories for adapting to site requirements • High load-bearing capacity of up to 600 kg/m² (= Scaffold Category 6) • Platform level can be raised / lowered by either 0.50 m or 1.00 m at a time • Long service life thanks to its sturdy design, varnished floor planking and galvanised steel construction • Planking protected by steel section on the narrowside
The ready-to-use, fold-out Closure platform 3.00 m is the safe way to bridge corners and up to 2.50 m wide gaps – much safer and quicker than loose planks!
The Side handrail clamping unit T can quickly be slotted into place to make end railings.
Adding Handrail lengthening pieces K and safety netting turns the platform into a dependable sloping-rooftop fall barrier.
464
Doka Safety Systems | Working and Protection Platforms | Folding platform K
The standard suspension point is prepared by screwing a suspension cone into an embedded positioning-point.
The Doka Suspension loop ES, for loop-type suspension points, complies with DIN and ÖNORM rules.
A suspension plate can be used to retrofit a dependable suspension point to the concrete floor-slab whenever needed.
The Fair-faced concrete positioning cone 15.0 5 cm is particularly suitable for fair-faced concrete projects where the form-tie points and suspension points are required to make a uniform hole-pattern.
Logistics The Folding platforms K are pre-assembled and can be transported and stored folded closed. This saves space and keeps them safe from overturning and slipping. This high packing density translates into low shipping volume and excellent utilisation of the loading area of the truck.
465
Folding platform K
Types of suspension point
Folding platform K | Working and Protection Platforms | Doka Safety Systems
References
With an extremely tight building-shell construction time of a mere six months, the “Hotel Zwei” project not only requires the utmost commitment from the site crew but also calls for highperforming formwork solutions and some highly efficient site logistics. Hotel Zwei, Austria Contractors: Universale Hochbau, Vienna
466
Folding platform K
Doka Safety Systems | Working and Protection Platforms | Folding platform K
Rentable extension components permit cost-saving, efficient utilisations. New campus building for the “FH Graz” college of higher technical education in Graz, Austria Contractors: Strobl Bau
467
Folding platform K | Working and Protection Platforms | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Safety Folding platform Systems K
Doka folding platform K 3.00m Doka folding platform K 4.50m Doka-Faltbühne K
291.5 580442000 444.5 580443000
Suspended platform 120 3.30m Suspended platform 120 4.30m Hängebühne 120
Galvanised Delivery condition: folded closed
Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Folding bracket K
44.0 580411000 52.6 580412000
52.4 580441000
Faltkonsole K
Galvanised Length: 224 cm Height: 245 cm Delivery condition: folded closed
Support girder
28.5 580414000
Stützträger
Galvanised Height: 248 cm
Bow head K-ES
3.9 580444000
Bügelkopf K-ES
Galvanised Height: 35 cm
Bearing profile
4.9 580417000
Druckprofil
Galvanised Length: 34 cm Width: 19 cm
Doka corner folding platform A Doka-Faltbühne A Eckausführung
461.5 580473000
Strut
Galvanised Length: 370 cm
Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
Closure platform 3.00m Ausgleichsbühne 3,00m
153.5 580485000 Timber parts varnished yellow Steel parts galvanised Delivery condition: folded closed
32.9 580416000
Stützstab
Horizontal brace d2 175
2.7 582733000
Horizontalstrebe d2 175
Galvanised
Horizontal strut 1.35m
2.1 580422000
Horizontale 1,35m
Galvanised
468
Doka Safety Systems | Working and Protection Platforms | Folding platform K
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
[kg]
Article n°
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
[kg] Side handrail clamping unit T Seitenschutzgeländer T
Article n°
29.1 580488000
Galvanised Length: 115 - 175 cm Height: 112 cm
Galvanised
Universal railing shackle
3.0 580478000
Universal-Geländerbügel
Galvanised Height: 20 cm
Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Doka 4-part chain 3.20m
Galvanised Width-across: 22 mm
Swivel coupler 48mm
15.0 588620000
Doka-Vierstrangkette 3,20m
Follow the directions in the "Operating Instructions"!
1.5 582560000
Drehkupplung 48mm
Fix-De-Fix remote uncoupling system 3150kg Multi-purpose waling WS10 Top50 3.50m
68.4 580012000
Steel waling WS10 Top50 3.50m
71.5 580050000
Mehrzweckriegel WS10 Top50 3,50m Painted blue
Stahlwandriegel WS10 Top50 3,50m Painted blue
Facade precast member clamp V Fassaden-Fertigteilklemme V
27.0 586014000
Abhängeautomat Fix-De-Fix 3150kg Follow the directions in the "Operating Instructions"!
Platform transport fork K/M
194.0 580492000
Bühnen-Umsetzgabel K/M
Painted blue Length: 205 - 262 cm Width: 210 cm Delivery condition: folded closed Follow the directions in the "Operating Instructions"!
8.1 580694000
Galvanised Length: 70 cm Height: 41 cm Width-across: 50 mm
Handrail lengthening piece K Geländerverlängerung K
Galvanised Height: 87 cm
4.9 580447000
Star screw
0.75 580425000
Sternschraube Galvanised Length: 17 cm
469
Folding platform K
Galvanised Width-across: 22 mm
Folding platform K | Working and Protection Platforms | Doka Safety Systems
[kg] Suspension beam K2
Article n°
44.1 580463000
Einhängeträger K2
Galvanised Height: 251 cm
[kg] Universal tool box 15.0
Universal-Werkzeugbox 15,0 included in scope of supply:
(A) Reversible ratchet 1/2"
Article n°
9.1 580392000 0.73 580580000
Galvanised Length: 30 cm
Bow head ES
6.2 580459000
Bügelkopf ES
Galvanised Length: 21 cm Width: 11 cm Height: 29 cm
Suspension plate AK
8.3 580494000
Aufhängeblech AK
Galvanised Length: 65 cm
Suspension loop ES
1.0 580458000
Einhängeschlaufe ES
Non-treated Length: 72 cm
Suspension shoe A
10.0 580407000
Aufhängeschuh A
Galvanised Length: 22 cm Width: 13 cm Height: 34 cm
Suspension profile AK
14.8 580595000
Aufhängeprofil AK
Galvanised Length: 109 cm
Suspension profile ES
15.3 580596000
Aufhängeprofil ES
Galvanised Length: 109 cm
Suspension plate ES
9.2 580493000
Aufhängeblech ES
Galvanised Length: 68 cm
470
(B) Fork wrench 13/17 (C) Fork wrench 22/24 (D) Fork wrench 30/32 (E) Fork wrench 36/41 (F) Ring spanner 17/19 (G) Square nut 22 (H) Box spanner 41 (I) Extension 11cm 1/2" (J) Extension 22cm 1/2" (K) Universal joint coupling (L) Nut for box spanner 19 1/2" L (M) Box nut 13 1/2" (N) Box nut 24 1/2" (O) Box nut 30 1/2" (P) Positioning cone spanner 15.0 DK Galvanised Length: 8 cm Width-across: 30 mm
0.08 0.22 0.80 1.0 0.27 0.31 0.99 0.20 0.31 0.16 0.16 0.06 0.12 0.20 0.30
580577000 580587000 580897000 580586000 580590000 580589000 580585000 580581000 580582000 580583000 580598000 580576000 580584000 580575000 580579000
Folding platform K
Doka Safety Systems | Working and Protection Platforms | Folding platform K
471
Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
Platform system Xsafe plus The unbeatably economical safety system
The platform is reinforced with struts at the points where it is necessary to connect panel struts.
472
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus
The utmost safety on wall formwork The pre-assembled, fold-out working platforms, with their integral front/rear and side railings, ladders and self-closing manhole lids, are ready for immediate use and bring about decisive improvements in workplace safety.
Simple to use as the working platforms are completely pre-assembled Pre-assembled, folding working platforms ensure • time and cost-savings as so little assembly work is needed • no more wasting time looking for lost items, as all parts are captively integrated in the system • the system’s unrivalled stability gives crew a safe feeling at all times
Safe working means fast working
Platform system Xsafe plus
Extra-thorough safety precautions on the site • superlative safety, as side and end guards are integrated in the platform • the legal certainty provided by the system’s officially certified production • the motivating effect on the site crew of working with super-safe products
An economical solution that cuts costs The Platform system Xsafe plus is more cost-effective: • its perfect stackability cuts storage and freight costs • attractive “package deal” of formwork plus integral safety platform • greatly simplified planning from using a single platform concept for all Doka wall systems
Doka Wall Systems
473
Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Safety Platform system Systems Xsafe plus
Xsafe plus platform 2.70m with side railing
190.5 586401000
Xsafe plus-Bühne 2,70m mit Seitengeländer Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus platform 2.00m
119.5 586407000
Xsafe plus-Bühne 2,00m
Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus platform 1.35m Xsafe plus platform 2.70m
152.0 586404000
Xsafe plus-Bühne 2,70m
90.0 586408000
Xsafe plus-Bühne 1,35m
Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus platform 1.00m
78.5 586409000
Xsafe plus-Bühne 1,00m
Xsafe plus platform 2.50m with side railing
Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
182.0 586402000
Xsafe plus-Bühne 2,50m mit Seitengeländer Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus side railing
21.1 586410000
Xsafe plus-Seitengeländer
Galvanised Width: 88 cm Height: 110 cm
Xsafe plus platform 2.50m
143.5 586405000
Xsafe plus-Bühne 2,50m
Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus platform 2.40m with side railing
Xsafe plus railing-level adjuster Xsafe plus-Geländerausgleich
Galvanised Height: 111 cm
172.3 586403000
Xsafe plus-Bühne 2,40m mit Seitengeländer Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
Xsafe plus supporting strut
8.4 586412000
Xsafe plus-Stützenstrebe
Galvanised Length: 91 - 99 cm
Xsafe plus stacking waler U80 1.50m Xsafe plus platform 2.40m Xsafe plus-Bühne 2,40m
139.5 586406000 Steel parts galvanised Timber parts varnished yellow Height: 136 cm Delivery condition: folded closed
474
3.5 586411000
Xsafe plus-Aufstockriegel U80 1,50m Painted blue Length: 144 cm
27.0 586413000
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus
[kg] Xsafe plus-Aufstockriegel U80 2,10m Painted blue Length: 201 cm
Xsafe plus stacking waler U100 2.10m
Xsafe plus-Aufstockriegel U100 2,10m Painted blue Length: 201 cm
Xsafe plus platform waling U80 0.90m
Xsafe plus-Bühnenriegel U80 0,90m Painted blue Length: 92 cm
Xsafe plus lifting waler
37.5 586414000
[kg] Xsafe plus telescopic ladder
Article n°
18.0 586421000
Xsafe plus-Teleskopleiter
Galvanised Height: 158 - 274 cm
45.5 586415000 Xsafe plus ladder extension 1.15m
7.0 586422000
Xsafe plus ladder support
1.5 586423000
Xsafe plus-Leiternverlängerung 1,15m Galvanised Height: 126 cm
17.5 586416000
Xsafe plus-Leiternstütze
Galvanised Height: 55 cm
14.5 586417000
Xsafe plus-Umsetzriegel
Galvanised Height: 87 cm
Xsafe plus ladder starter piece Xsafe plus-Leiterneinstieg
6.8 586424000
Galvanised Length: 95 cm
Xsafe plus platform extension 0.60m
Xsafe plus-Bühnenverlängerung 0,60m Galvanised Height: 120 cm
44.3 586418000 Xsafe plus counter railing 1.00m Xsafe plus counter railing 1.35m Xsafe plus counter railing 2.00m Xsafe plus counter railing 2.40m Xsafe plus counter railing 2.50m Xsafe plus counter railing 2.70m Xsafe plus-Gegengeländer
16.3 18.0 21.3 23.3 23.7 25.4
586430000 586429000 586428000 586427000 586426000 586425000
Galvanised Height: 200 cm
Xsafe plus platform transition Xsafe plus-Bühnenübergang
19.4 586419000
Galvanised Length: 85 cm Width: 48 cm
Xsafe plus handrail lengthening piece Xsafe plus-Geländerverlängerung
Galvanised Length: 81 cm Width: 53 cm
3.8 586420000
Xsafe plus swivel plate
2.7 586431000
Xsafe plus-Schwenklasche
Galvanised Height: 33 cm
475
Platform system Xsafe plus
Xsafe plus stacking waler U80 2.10m
Article n°
Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
[kg] Xsafe plus fixing plate
Article n°
4.5 586432000
Xsafe plus-Fixierlasche
Galvanised Width: 16 cm Height: 43 cm
Xsafe plus waling connector Xsafe plus-Riegelverbinder
5.8 586433000
Galvanised Height: 33 cm
Xsafe plus support adapter
21.0 586434000
Xsafe plus-Stützenadapter
Galvanised
476
[kg]
Article n°
Platform system Xsafe plus
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus
477
Guardrail systems Handrail posts & clamps | Guardrail systems | Doka Safety Systems
Handrail posts & clamps Safety on every structure
22,049 m² of office and retail space were completed early in 2007 with the aid of Dokaflex floor-slab formwork. Working with Doka handrail posts & clamps made it possible to put up the railings, and thus all the formwork, very safely and quickly. BC20 office building, Austria Contractors: Strabag
478
Doka Safety Systems | Guardrail systems | Handrail posts & clamps
For more safety on the site Doka handrail posts & clamps are a must on every site. These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success.
Uninterrupted safety in every phase of the work Doka handrail posts & clamps provide the very highest safety • against fall hazards • on the structure and the formwork • thanks to their superior quality (hot-dip galvanised) • and comply with the stringent EN 13374 safety standard
Convenient and easy to mount Handrail posts & clamps
thanks to their many different fixing methods Doka handrail posts & clamps are quick and easy to mount • by quick-fixing with a wedge • as the only tool needed is a hammer
Multi-functional as they can be used in many different situations Put the versatility of the Doka handrail posts & clamps to work for you: • Handrail clamp S • Handrail clamp T • Handrail post 1.10 m
479
Handrail posts & clamps | Guardrail systems | Doka Safety Systems
Utilisation Handrail clamp S For safeguarding exposed edges on buildings, the Handrail clamp S can easily be attached to any point on a timber formwork beam. Its wide clamping range means that it can be used for putting up guard rails in many different parts of the site, on the formwork and the structure.
Handrail clamp T The Handrail clamp T ensures safety all the way: from when the slab or superstructure is cast until the permanent railings are erected. This clamp can be fixed anywhere: to reinforcement hoops or to Bridge edge beam anchors – with no need for any adapters or accessories! It has a wide range of additional applications for fall-arrest barriers on precast concrete stairways or hollow-element walls.
480
Doka Safety Systems | Guardrail systems | Handrail posts & clamps
Handrail post 1.10 m
The Handrail post 1.10 m is very quick and easy to mount: • in an attachable sleeve or screw-sleeve in soft concrete • in a hole subsequently drilled in the concrete • in the cross borehole of a framed formwork panel, using a hexagon nut
481
Handrail posts & clamps
The Handrail post 1.10 m is a fast and very safe way of putting up safety railings. Handrail posts 1.10 m can be deployed along slab-edges, floor openings or other fall-hazard locations, or for opposing guard-rails on wall formwork. The hot-dip galvanised all-steel construction of the Handrail post 1.10m gives it a very long lifespan.
Handrail posts & clamps | Guardrail systems | Doka Safety Systems
Article list [kg]
Article n°
Doka Safety Guard rails Systems
Handrail clamp S
11.5 580470000
Schutzgeländerzwinge S Galvanised Height: 123 - 171 cm
Handrail clamp T
12.3 584381000
Schutzgeländerzwinge T Galvanised Height: 122 - 155 cm
Handrail post 1.10m
5.6 584384000
Schutzgeländer 1,10m
Galvanised Height: 134 cm
Attachable sleeve 24mm
0.03 584385000
Steckhülse 24mm
Grey Length: 16.5 cm Diameter: 2.7 cm
Screw sleeve 20.0
0.03 584386000
Schraubhülse 20,0
Yellow Length: 20 cm Diameter: 3.1 cm
482
[kg]
Article n°
Handrail posts & clamps
Doka Safety Systems | Guardrail systems | Handrail posts & clamps
483
Sideguard system XP | Guardrail systems | Doka Safety Systems
Sideguard system XP The cost-saving fall-arrest barrier for both structure and formwork
Here’s how easy and fast the Sideguard system XP is to mount: Simply fix on the handrail-post shoe with e.g. a Doka Express anchor, and insert the upright into the shoe. The upright locks into the shoe automatically. All that’s needed now is to slot the protective grating into place – for greater safety on the site.
484
Doka Safety Systems | Guardrail systems | Sideguard system XP
Quicker to operate, for greater safety This system is the universal safety solution for all edge protection needs. It fits in ideally with Doka systems – be they wall formwork, floor-slab formwork, systems for safeguarding slab-edges or fall-arrest barriers in the structure shell.
Can be put into use quickly as so little erection work is needed Put the advantages of the Sideguard system XP to work for you • cost savings thanks to captively integrated parts • the utmost safety and outstanding stability • simplified ease of handling thanks to stable lightweight construction
The best safety there is need not be expensive Optimum safety thanks to
Sideguard system XP
• cost savings from using just one system for fall protection when forming walls and floor-slabs and working on the structure shell • cuts costs by being rentable • legal certainty from officially tested quality
Modularity is guaranteed as the system is easy to extend vertically Can be fitted/mounted anywhere • many and varied potential applications, not only in conjunction with formwork • logical set-up procedure makes it quick and self-explanatory to use
485
Sideguard system XP | Guardrail systems | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Safety Sideguard system Systems XP
Handrail post XP 1.20m
4.0 586460000
Geländersteher XP 1,20m
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised Height: 118 cm
Galvanised Diameter: 1.6 cm
Screw-on shoe XP
1.5 586458000
Schraubschuh XP
Galvanised Height: 27 cm
Screw sleeve 20.0 Toeboard holder XP 1.20m
0.50 586461000
Fußwehrhalter XP 1,20m
Yellow Length: 20 cm Diameter: 3.1 cm
Galvanised Height: 21 cm
Handrail post XP 0.60m
5.0 586462000
Geländersteher XP 0,60m
0.03 584386000
Schraubhülse 20,0
Attachable sleeve 24mm
0.03 584385000
Steckhülse 24mm
Galvanised Height: 68 cm
Grey Length: 16.5 cm Diameter: 2.7 cm
Step bracket XP
1.5 586459000
Treppenkonsole XP
Toeboard holder XP 0.60m
Galvanised Height: 27 cm
0.70 586463000
Fußwehrhalter XP 0,60m
Galvanised Height: 21 cm
Bridge-deck clamp XP
8.0 586465000
Tragwerkzwinge XP
Railing clamp XP 40cm
Galvanised Height: 68 cm
9.0 586456000
Geländerzwinge XP 40cm
Galvanised Height: 73 cm
Protective grating XP 2.70x1.20m Schutzgitter XP 2,70x1,20m
21.0 586450000
Galvanised
Handrail-post shoe XP
2.0 586457000
Geländerschuh XP
Galvanised Length: 20 cm
Doka express anchor 16x125mm Doka-Expressanker 16x125mm
0.31 588631000
Galvanised Length: 18 cm Follow fitting instructions!
Scaffold tube holder D48mm Gerüstrohrhalter D48mm
Galvanised Height: 18 cm
486
1.1 586464000
Doka Safety Systems | Guardrail systems | Sideguard system XP
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Gerüstrohr 48,3mm
[kg]
Article n°
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
[kg]
Article n°
Sideguard system XP
Galvanised
487
Protection screens Protection screen Xlimb 60 | Protection screens | Doka Safety Systems
Protection screen Xclimb 60 The very highest safety and speed in floor-slab forming operations
Soaring to 160 m above Milan, the two high-rise towers of the administrative seat of the Lombardy regional government are the tallest buildings in Italy. At heights like these, the workplace safety requirements are immense – and can be fulfilled to perfection with the Protection screen Xclimb 60. Altra Sede di Regione Lombardia, Italy Contractors: Consorzio Torre
488
Doka Safety Systems | Protection screens | Protection screen Xlimb 60
Perfectly protected at all heights The full-area enclosure around the uppermost levels of the building enables all work to be carried out in complete safety, protected from all climatic influences. A loading platform can be integrated into the protection screen for straightforward, safe repositioning of floor-slab formwork, tools and other materials.
Huge flexibility in on-site use Benefit from the system’s multi-use capability, with features like • individually adaptable working platforms • optimised cycle times, as loads can be transferred into either the current or previous casting section • the option of using it as a self-climbed system if there are crane-time constraints, with hand-shifted hydraulic lifting appliances
Protection screen Xlimb 60
• the ability to reposition the protection screen even while the floor-slab formwork is still in place
High standard of safety for your site crew Safety is “built in” to all phases of the work, as • the system is anchored to the structure at all times • the guided repositioning operation is independent of the weather • the crew are protected by an enclosure that can be adapted to meet site-specific requirements
Simple modular design concept based on a practical “construction-kit” system Save time and money because of • the high degree of pre-assembly • the way the system simplifies planning, utilisation and handling
Guided climbing formwork Xclimb 60
Automatic climbing formwork Xclimb 60
489
Protection screen Xlimb 60 | Protection screens | Doka Safety Systems
References The protection-screen units were pre-assembled at the Doka branch and JIT-delivered to the site in the middle of downtown Chicago. Legacy Tower, USA Contractors: Walsh Construction
The centrepiece of the 101 m tall St. Paul’s Place development in the centre of Sheffield is a new 33-storey apartment tower. On this project, top priority was given to ensuring short execution times and maximum workplace safety, and to making optimum use of the limited craneage – which is why contractors Northfield Construction opted for a comprehensive formwork solution from Doka. St. Paul’s Place, Great Britain Contractors: Northfield Construction
490
Doka Safety Systems | Protection screens | Protection screen Xlimb 60
Just two blocks north of the Empire State Building in New York, this 57-storey tower will house 320 prestigious apartments and some 200 hotel rooms.
Protection screen Xlimb 60
400 Fifth Avenue, NY, USA Contractors: Navillus Contracting
Built to a design by architects KSP Engel & Zimmermann, this high-rise complex in Frankfurt constitutes a networked unit of four separate parts. Soaring above the rooftops of Frankfurt, its two towers, one of 135 m and the other of 99 m, were enclosed by Doka protection screens. Frankfurt Hoch 4, Germany Contractors: Ed. Züblin
491
Access Systems Stair tower | Access Systems | Doka Safety Systems
Stair tower The safe, fast way to get up and down
Supermarket chain EDEKA Rhein-Ruhr built a new logistics centre in Hamm, Germany, which was designed to be fitted out with fully automated order-picking systems. With this project, EDEKA set new standards in the field of logistics. Edeka logistics centre in Hamm, Germany Contractors: F.C. Trapp Bauunternehmung
492
Doka Safety Systems | Access Systems | Stair tower
For fast, safe access to high-up workplaces The stair tower can be put together very quickly from frames and pre-assembled stairway elements. Intermediate exits permit safe access to all work-deck levels. The stair tower is anchored to the structure as required by the usage situation, and complies with the relevant safety rules.
Multi-functional as it can be used in many different situations The type-tested components that can be used for stair towers are • Load-bearing tower Staxo 100 • Load-bearing tower Staxo • Load-bearing tower d2
Outstanding cost-efficiency for your site Makes work easier for your crew, because • of its ergonomical constructional design • getting up and down requires much less physical effort than on ladders Stair tower
• it gives the crew plenty of room to move, even in “2-way traffic” situations
Convenient and easy to erect thanks to its simple set-up procedure Quick and easy to erect, as • there are only a very few separate components • the only tool needed is a hammer
Load-bearing tower d2
Load-bearing tower Staxo 100
493
Stair tower | Access Systems | Doka Safety Systems
References
As part of the project to extend the motorway around the Spanish island of Gran Canaria, Doka supplied all the equipment needed for casting the piers and bridge superstructure of Viaducto 5, in the northern part of the island. As well as the Doka cantilever forming traveller, a newly developed system of main support girders was also fielded on this project, for casting the pier-heads. Safe workplace access was provided by the Doka stair tower. Viaducto 5, Spain Contractors: UTE Guia-Pagador
494
Stair tower
Doka Safety Systems | Access Systems | Stair tower
The “Neue Mitte Lehen” development is a spaciously designed new district centre for the Salzburg suburb of Lehen. Consisting of two parts, it has been built on the site of a former stadium. The stadium itself has been retained as a heritage element and turned into a quiet public park complete with well-tended lawns. Neue Mitte Lehen, Salzburg, Austria Contractors: Porr
495
Stair tower | Access Systems | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Dokatower Stair Safety250 Systems
Staxo 100 frame 1.20m
28.0 582301000
Staxo 100-Rahmen 1,20m
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised
Galvanised Length: 75.5 cm
Alu stair bracket 250
33.2 582670000
Alu-Treppenlauf 250
Basic frame d2 1.20m
Aluminium Length: 263 cm Width: 80 cm Height: 112 cm
24.1 582701000
Grundrahmen d2 1,20m
Galvanised
Outer railing 250
19.5 582672000
Außengeländer 250
Coupler
Galvanised Length: 255 cm Height: 111 cm
0.57 582527000
Kupplungsstück Galvanised Height: 27 cm
Spring locked connecting pin 16mm Federbolzen 16mm
0.25 582528000
Galvanised Length: 15 cm
Screw jack foot
Inner railing 250 Galvanised Height: 155 cm
9.0 582637000
Fußspindel
7.0 582671000
Innengeländer 250
Galvanised Height: 69 cm
Access railing 250
38.0 582675000
Einstiegsgeländer 250
Heavy duty screw jack 70
Galvanised Length: 255 cm Height: 117 cm
8.8 582639000
Lastspindel 70
Galvanised Height: 101 cm
Access support 250
12.6 582674000
Einstiegsadapter 250
Split nut B
2.0 582634000
Spannmutter B Galvanised
496
Galvanised Height: 238 cm
Doka Safety Systems | Access Systems | Stair tower
[kg] Landing railing 250
Article n°
6.3 582673000
Podestgeländer 250
Galvanised Length: 160 cm Height: 48 cm
Scaffold planking 60/60cm Scaffold planking 60/100cm Scaffold planking 60/150cm Scaffold planking 60/175cm Scaffold planking 60/200cm Scaffold planking 60/250cm Scaffold planking 60/300cm Gerüstbelag
[kg]
Article n°
5.7 8.5 12.0 14.7 17.5 21.0 24.8
582330500 582306500 582307500 582332500 582308500 582309500 582310500
Aluminium
Anchoring shoe for stair tower Ankerschuh für Treppenturm
3.4 582680000
Galvanised Length: 22 cm Width: 12 cm Height: 22 cm
Warning sign "No entry" 300x300mm Verbotsschild "Zutritt Verboten" 300x300mm
Cone screw B 7cm
0.70 581575000
0.86 581444000
Konusschraube B 7cm
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
4.0 6.0 8.0 8.6 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Stair tower
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m Galvanised
Transition swivel coupler 48/76mm
1.9 582563000
Swivel coupler 48mm
1.5 582560000
Übergangsdrehkupplung 48/76mm Galvanised Width-across: 22 mm
Drehkupplung 48mm
Galvanised Width-across: 22 mm
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
497
Stair tower | Access Systems | Doka Safety Systems
[kg]
Article n°
[kg]
Article n°
Dokatower Stair Safetyd2-225 Systems
Basic frame d2 1.20m
24.1 582701000
Grundrahmen d2 1,20m
Universal dismantling tool
3.7 582768000
Universal-Lösewerkzeug
Galvanised Length: 75.5 cm
Galvanised
Stair bracket 225 right Stair bracket 225 left
24.6 582681000 24.6 582682000
Treppenlauf 225
Coupler
Galvanised Length: 263 cm Height: 111 cm
0.57 582527000
Kupplungsstück Galvanised Height: 27 cm
Spring locked connecting pin 16mm Federbolzen 16mm
0.25 582528000
Galvanised Length: 15 cm
Pin 7x60mm
0.02 582683000
Steckbolzen 7x60mm
Diagonal brace d2 12.225
Galvanised
6.0 582717000
Diagonalstrebe d2 12.225
Galvanised
Inner handrailing 225
5.7 582685000
Innenholm 225
Galvanised Height: 111 cm
Horizontal brace d2 225
3.4 582735000
Horizontalstrebe d2 225
Galvanised
Intermediate railing 225
5.7 582686000
Zwischengeländer 225
Screw jack foot
Galvanised Length: 87 cm Height: 114 cm
9.0 582637000
Fußspindel
Galvanised Height: 69 cm
Heavy duty screw jack 70
8.8 582639000
Lastspindel 70
Connection angle 225 Galvanised Height: 116 cm
Galvanised Height: 101 cm
Split nut B
2.0 582634000
Spannmutter B Galvanised
498
6.0 582687000
Anschlusswinkel 225
Railing board 15x160cm
4.0 183011000
Geländerdiele 15x160cm
Varnished yellow
Doka Safety Systems | Access Systems | Stair tower
[kg] Tread board 35mm 30x60cm
Article n°
3.0 183010000
Trittbrett 35mm 30x60cm
[kg] Warning sign "No entry" 300x300mm Verbotsschild "Zutritt Verboten" 300x300mm
Article n°
0.70 581575000
Varnished yellow
Anchoring shoe for stair tower Ankerschuh für Treppenturm
3.4 582680000
Galvanised Length: 22 cm Width: 12 cm Height: 22 cm
Cone screw B 7cm
0.86 581444000
Konusschraube B 7cm
red Length: 10 cm Diameter: 7 cm Width-across: 50 mm
Scaffold tube 48.3mm 1.00m Scaffold tube 48.3mm 1.50m Scaffold tube 48.3mm 2.00m Scaffold tube 48.3mm 2.50m Scaffold tube 48.3mm 3.00m Scaffold tube 48.3mm 3.50m Scaffold tube 48.3mm 4.00m Scaffold tube 48.3mm 4.50m Scaffold tube 48.3mm 5.00m Scaffold tube 48.3mm 5.50m Scaffold tube 48.3mm 6.00m Scaffold tube 48.3mm .....m
4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 4.0
Gerüstrohr 48,3mm
682014000 682015000 682016000 682017000 682018000 682019000 682021000 682022000 682023000 682024000 682025000 682001000
Swivel coupler 48mm
Stair tower
Galvanised
1.5 582560000
Drehkupplung 48mm
Galvanised Width-across: 22 mm
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised Width-across: 22 mm
Transition swivel coupler 48/60mm
Übergangsdrehkupplung 48/60mm Galvanised Width-across: 22 mm
Screw-on coupler 48mm 50
1.5 582561000
0.84 682002000
Anschraubkupplung 48mm 50
Galvanised Width-across: 22 mm
499
Ladder system XS | Access Systems | Doka Safety Systems
Ladder system XS Safety on all up/down access routes
It has to be possible to get to the workplace using safe horizontal and vertical access routes. The best solution here is ladder systems designed as an integral part of the overall system. These provide a ladder which is optimally fixed and always in the right place. In turn, this ensures that vertical access to the pouring platform or intermediate platform meets all the safety requirements. Nordpan-Rubner timber building panels factory, Sillian, Austria Contractors: Walter Frey
500
Doka Safety Systems | Access Systems | Ladder system XS
Easy to set up, for complete safety System-based ladderways with integral ladder cages can be attached to Doka wall and column formwork in a few simple steps. These safety accessories can be mounted to the formwork while this is still placed flat on the ground. This ensures complete safety, right from the word “go”.
Superlative safety with a perfect system The ladder system and cage ensure safe, fast working • complete safety when climbing up to, or down from, working platforms • complies with all statutory regulations • proven Doka quality, with hot-dip galvanised ladders and ladder cages
Ensures smooth workflows by reducing downtimes Safe working means fast working
Ladder system XS
• having safe up/down access makes for a smooth, efficient construction workflow • working in safe surroundings boosts your site-crews’ motivation
Simple to deploy – anywhere with only a small number of different system-based ladders One single system for all up/down access routes to work-platforms; compatible with • all Doka wall formwork, including circular formwork and Doka supporting construction frames • all Doka column formwork systems • all climbing formwork and tunnel formwork systems, and the cantilever forming traveller
Doka Climbing Systems
Doka Wall Systems
501
Ladder system XS | Access Systems | Doka Safety Systems
References
The perfect match between the traveller and the formwork, the high standard of safety and the optimised ergonomic design all performed convincingly during construction of this bridge across the River Elbe near Litomerice. Safe workplace access routes were provided here by the integrated Ladder system XS. Prosmyky Bridge over the River Elbe, Czech Republic Contractors: JV of SMP & Metrostav
502
Ladder system XS
Doka Safety Systems | Access Systems | Ladder system XS
The Westbahn rail tunnel is characterised by a cross-section that varies in both height and width, which presented some very special requirements in terms of the adaptability of the formwork solution. Westbahn rail tunnel contract section H4-3, Austria Contractors: Alpine
503
Ladder system XS | Access Systems | Doka Safety Systems
Article list [kg]
Article n°
[kg]
Article n°
Doka Safety Access system Systems XS
System ladder XS 4.40m
33.2 588640000
System-Leiter XS 4,40m
Connector XS Framax/Alu-Framax Anschluss XS Framax/Alu-Framax
11.2 588639000
Galvanised Length: 115 cm
Galvanised
Connector XS Wall formwork Anschluss XS Wandschalung
20.8 588662000
Galvanised Width: 89 cm Height: 63 cm
Fixing clamp XS Framax
1.5 588677000
Befestigungsklemme XS Framax
Ladder extension XS 2.30m
Galvanised Length: 20 cm
19.1 588641000
Leiternverlängerung XS 2,30m
Galvanised
Connector XS KS
13.2 580367000
Anschluss XS KS
Galvanised Length: 115 cm
Connector XS platform decking KS Anschluss XS Fertigbelag KS
Securing barrier XS
Galvanised Length: 161.8 cm
4.9 588669000
Sicherungsschranke XS
11.0 580368000
Galvanised Length: 80 cm
Connector XS RS
22.2 587955000
Anschluss XS RS
Ladder cage XS 1.00m Ladder cage XS 0.25m
Galvanised Length: 115 cm
16.5 588643000 10.5 588670000
Rückenschutz XS
Galvanised
Connector XS DM/SL-1
11.7 588672000
Anschluss XS DM/SL-1
Galvanised Length: 100 cm
Ladder cage exit XS
17.0 588666000
Rückenschutz-Ausstieg XS Galvanised Height: 132 cm
Connector XS column formwork platform Anschluss XS Stützenbühne
Galvanised Length: 123 cm
504
10.0 588637000
Doka Safety Systems | Access Systems | Ladder system XS
[kg] Ladder adapter XS
Article n°
[kg]
Article n°
5.0 588673000
Leiternfuß XS
Galvanised Height: 50 cm
Accessories for Doka Climbing Systems Manhole B 70/60cm
22.0 581530000
Bühnendurchstieg B 70/60cm
Cover hinge SK 35cm
0.30 581533000
Ladder clamp SK
0.23 581239000
Deckelscharnier SK 35cm
Leiternklemme SK
Ladder system XS
Steel parts galvanised Timber parts varnished yellow Length: 81 cm Width: 71 cm
Galvanised Length: 8 cm
Ladder bolt XS
0.85 581561000
Leiternbolzen XS
Galvanised Length: 51 cm
Ladder holder SK
0.36 581532000
Leiternhalter SK
Galvanised
Ladder adapter SK
2.3 581531000
Leiternfuß SK
Galvanised
505
Alphabetical index of articles Everything at a glance
506
507
508
509
510
511
512
513
514
515
www.doka.com