1000 Watts Ups Circuit Diagram

Power Supply

1-1

Uninterruptible Power Supply High frequency on line UPS (1KVA-3KVA) Following the popularity of computer networks and the continual upgrades of information processing technology, there is now virtually no limits for network information transmissions. Undoubtedly, the server is the soul of a computer network which processes numerous network data day in and day out and is naturally more demanding in terms of power requirements computers in general. Any increase of power network load, excessively low voltage, unstable frequency or even a sudden power-off can interrupt normal network operations!

1

In line with the power requirements for network system, GREEGOO has developed a new generation of online intelligent UPS, tieds UPS, UPS battery backup---GOLD Series 1K, 2K, 3K UPS. Its uses the Motorola microprocessor with robust processing power which is capable of detecting and controlling quickly and accurately all movements of the UPS to ensure high product reliability. In addition to providing the network with power protection for virtually zero interruption, regulated voltage and regulated frequency, interferenceresistant capability and filtering of noisy signals, under normal conditions, utility power obtains via AC-DC circuit the DC bus voltage which is then converted to 220V AC output via the inverter, so as to safeguard the data over the entire network. Therefore, the power used by the load is the purified sine wave power via regulated voltage and regulated frequency with noisy signals filtered. Furthermore, GREEGOO GOLD Series 1K, 2K, 3K UPS, tieds UPS, UPS battery backup are connected through the RS232 communication port to GREEGOO Power Management software for power detection and power monitoring, to integrate UPS and the network server into one entity with power status available at any time. Moreover, it achieves the intelligent functions such as timer-controlled self-inspection, automatic disk-saving, automatic timer-controlled poweron and power-off and record of power status etc., to achieve the zero distance of communication between the user and UPS. Whenever utility power supply is interrupted, the UPS, tieds UPS, UPS battery backup will inform the server immediately and gets ready for switching off the unit and saving automatically all data before performing the normal power-off instruction. Even in an unattended network environment, the UPS can still ensure data safety of the network system.

Application ■

Servers, Data-Center Critical network devices, Sensitive electronic equipment, Telecom...

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

True on-line double conversion technology with advanced microprocessor control; Wide input voltage range; Zero transfer time; Protection against all type of power problems; Self test while start of the UPS; Site wiring fault warning; On-battery power-on function; Smart RS232 communication interface; Intelligent slot available; Sealed lead-acid, maintenance free battery.

Greegoo Electric 5.2008

http://www.greegoo.com

tieds UPS, UPS battery backup

Power Supply

1-

Uninterruptible Power Supply High frequency on line UPS (1KVA-3KVA) Technical specifications

1

Product Series Model Rated Power Input

Output

GOLD G1K VA/W Nominal Voltage Voltage Range Frequency Range Power Factor Connection Voltage Frequency Waveform Distortion Overload Capability Current Crest Ratio Connections

Battery

G2K

G3K

1kVA / 0.7kW 2kVA / 1.4kW 220VAC 115 ~ 300VAC 46~54Hz(default), user adjustable within 40~60Hz 0.97 IEC320-10A inlet 220VAC ± 2% 46~54Hz or 50Hz ± 0.2Hz (Line mode) 50Hz ± 0.2Hz ( Battery mode) Sine Wave 3% 4% 108%~150% for 30 sec., ≥150% for 300 ms 3:1 IEC320 * 4 IEC320 * 6

3kVA / 2.1kW

IEC320-16A inlet

IEC320 * 3 and Terminal Block

Type Quantity Back-up Time (Full load) Recharge Time Automatic Transfer Before UPS Power-on Voltage Range

Sealed, Maintenance free, Lead-Acid (Panasonic) 3 pieces 8 pieces 5 min 9 min 5 min 5 hrs to 90% of capacity after full load discharge Bypass on overload and UPS failure Default “NO”, user adjustable to “YES” 80~264VAC (Default), user adjustable within 80~286VAC Transfer Time 0 ms; less than 4 ms from inverter to bypass and vice versa LED Indicators Status Load level/Battery level, Battery, Utility Power, Inverter, Bypass, Overload, Fault Audible Alarm Bypass, On battery mode, Battery low, Overload, Fault Acoustic Noise At 1 meter distance 45 dBA 50 dBA Communications DB-9 Port RS-232 Serial Interface Intelligent Slot Options: WebPower, AS400 Card or WinPower CMC Network Surge Protection RJ45 I/O port available for network or Fax/Modem Environmental Operating Temperature 0˚C~ 40˚C Operating Humidity 20 ~ 90% non-condensing Weight Net (Kg) 13 31.5 32 Dimensions W x D x H (mm) 145 x 400 x 220 192 x 460 x 348


G1KS, G2KS & G3KS for longer Backup time with additional Battery Packs are available, please consult local distributors.


Power Supply

1-3

Uninterruptible Power Supply High frequency on line UPS (6KVA-10KVA) Application ■


1

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

True online double conversion technology; Wide input voltage range; Zero transfer time; Protection against all types of power problems; No add-on CNTL unit required for parallel connection; Low initial investment and flexible for future expansion; Highest reliability and maximum performance for power sharing and redundancy; Equipped with Maintenance Bypass Switch; Smart RS232 and Intelligent slot interface; Sealed lead-acid, maintenance free battery.

Technical specifications G6KN 6kVA/4.2kW

Input

220VAC 176 ~ 276VAC 46 ~ 54Hz 0.98 Hardwired 220VAC ±1% 50Hz ±0.1% ( Battery mode) Sine Wave 0.7 ≤ 2% under linear load 105% ~ 130% for 10 min., ≥130% for 1 min. 3:1 max. Hardwired Sealed, Maintenance free, Lead-Acid (Panasonic) 20 pieces 7 min 5 min 8 hrs to 90% of capacity after full load discharge 0 ms Yes Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault Alarm beeps every two minutes Alarm beeps every four seconds, every second if battery low Alarm beeps two for every second Alarm beeps continuously £ 55 dBA RS232 serial interface Options: WebPower, AS400 or WinPower CMC up to three units in parallel for power redundancy and load sharing 0˚C~ 40˚C 20% ~ 90% non-condensing 84 93 260 x 570 x 717

Output

Battery

Nominal Voltage Voltage Range Frequency Range Power Factor Connection Voltage Frequency Waveform Power factor Voltage Distortion Overload Capability Current Crest Ratio Connection Type Quantity Back-up time (full load) Recharge time

Transfer time Maintenance Bypass Switch LED indicators Status Audible alarm Bypass Battery discharge Overload Fault Acoustic noise At 1 meter distance DB-9 Port Intelligent Slot Parallel Port Environmental Operating temperature Operating humidity Weight Net (kg) Dimensions W x D x H (mm)


G10KN 10kVA/7kW


Model Rated Power VA/W

Power Supply

1-

Uninterruptible Power Supply High frequency on line UPS (6KVA-10KVA) Technical specifications

1

Model Rated Power

G6KNS 6kVA/4.2kW

G10KNS 10kVA/7kW

220VAC 176 ~ 276VAC 46 ~ 54Hz 0.98 Hardwired Output 220VAC ±1% 50Hz ±0.1% ( Battery mode) Sine Wave 0.7 ≤ 2% under linear load 105% ~ 130% for 10 min., ≥130% for 1 min. 3:1 max. Hardwired Battery Sealed, Maintenance free, Lead-Acid (Panasonic) 240VDC Depends on the capacity of the external battery bank External Battery Socket Transfer time 0 ms Maintenance Bypass Switch Yes LED indicators Status Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault Audible alarm Bypass Alarm beeps every two minutes Battery discharge Alarm beeps every four seconds, every second if battery low Overload Alarm beeps two for every second Fault Alarm beeps continuously Acoustic noise At 1 meter distance £ 55 dBA Communications DB-9 Port RS232 serial interface Intelligent Slot Options: WebPower, AS400 or WinPower CMC Parallel Port up to three units in parallel for power redundancy and load sharing Environmental Operating temperature 0˚C~ 40˚C Operating humidity 20% ~ 90% non-condensing Weight Net (kg) 35 38 Dimensions W x D x H (mm) 260 x 570 x 717


Input

Volt-Amps/Watts Nominal Voltage Voltage Range Frequency Range Power Factor Connection Voltage Frequency Waveform Power factor Voltage Distortion Overload Capability Current Crest Ratio Connection Type Nominal DC Voltage Back-up time Connection


Power Supply

1-

Uninterruptible Power Supply High frequency on line UPS (10KVA-0KVA) Application ■


1

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■

True online double conversion technology; Wide input voltage range; Zero transfer time; Protection against all types of power problems; No add-on CNTL unit required for parallel connection; Low initial investment and flexible for future expansion; Highest reliability and maximum performance for power sharing and redundancy; Equipped with Maintenance Bypass Switch; Smart RS232 and Intelligent slot interface.

Technical specifications Model Rated Power VA/W

3G15KNS 15kVA/10.5kW

3G20KNS 20kVA/14kW

380VAC 304 ~ 478VAC 3 phase (4 wires plus ground) 46 ~ 54Hz 0.95 Ha rdwired Output 220VAC ±1%, Single phase 50Hz ±0.1% ( Battery mode) Sine Wave 0.7 ≤ 2% under linear load 105% ~ 130% for 10 min., ≥130% for 1 min. 3:1 max. Battery Sealed, Maintenance free, Lead-Acid 240VDC Depends on the capacity of the external battery capacity External Battery Socket Hardwired Transfer time 0 ms Maintenance Bypass Switch Yes LED indicators Status Load level/Battery level, Battery , Utility power, Inverter, Bypass, Overload, Fault Audible alarm Bypass Alarm beeps every two minutes Battery discharge Alarm beeps every four seconds, every second if battery low Overload Alarm beeps two for every second Fault Alarm beeps continuously ≤ 55 dBA ≤ 60 dBA Acoustic noise At 1 meter distance Communications DB-9 Port RS232 serial interface Intelligent Slot Options: WebPower, As400 or WinPower CMC Parallel Port up to three units in parallel for power redundancy and load sharing Environmental Operating temperature 0˚C~ 40˚C Operating humidity 20% ~ 90% non-condensing Weight Net (kg) 38.5 55 Dimensions W x D x H (mm) 260 x 570 x 717


Nominal Voltage Voltage Range Phase Frequency Range Power Factor Connection Voltage Frequency Waveform Power factor Voltage Distortion Overload Capability Current Crest Ratio Type Nominal DC Voltage Back-up time (full load) Connection


Input

3G10KNS 10kVA/7kW

Power Supply

1-6

Uninterruptible Power Supply High frequency on line UPS (LCD UPS 1KVA-10KVA) Application

1

■

1KVA ~ 10KVA ( IP/OP:220Vac/230Vac/240Vac ).

Key features ■ ■ ■ ■ ■ ■ ■ ■

Microprocessor Control Guarantees High Reliability; Comprehensive Self-Protection Design; Audible Alarm Mute; Cold Start Function; Auto Self-Testing System while Turning On UPS; Wide Input Voltage Range; Maintenance Bypass Switch for 6K/ 10K; N+X Parallel Redundancy and Capacity Expansion for 6K/ 10K.

Technical specifications MODEL Capacity Input

Output

Efficiency Battery

Transfer time Operation interface Audible alarm


Dimension Weight Enviro Nment Interface

VA/W

G1KD 1000VA/700W

G1KDS

G2KD G2KDS 2000VA/1400W

G3KD G3KDS 3000VA/2100W

Phase Frequency Range Power Factor Voltage Range

Single Phase with Ground 50Hz:46~54Hz >=0.97 Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%) Line Low Transfer 160VAC/140VAC/120VAC/110VAC± 5VAC Line Low Comeback 175VAC ± 5VAC Line High Transfer 300VAC± 5VAC Line High Comeback 285VAC± 5VAC Phase Single Voltage 220VAC/230VAC/240VAC Voltage Regulation ± 2% Frequency 46~54Hz ( Synchronized Range) Frequency 50 ± 0.2 Hz ( Battery Mode) Current Crest Ratio 3:01 Harmonic Distortion ?3% THD ＜4% THD ( Linear Load) ( Linear Load) ＜7% THD ( Non-Linear Load) ?6% THD ( Non-Linear Load) Output Waveform Pure Sinewave To AC Mode 85% 85% 85% To Battery Mode 83% 83% 83% Battery Type 12V/7.2Ah Depending on 12V/7.2Ah Depending on the 12V/7.2Ah Depending on the capacity of 8 capacity of external 8 the capacity of Numbers of Batteries 3 external batteries external Backup Time >5 minutes >9 minutes >5 minutes batteries batteries (Full Load) Recharge Time 5 hours to 90% 5 hours to 90% 5 hours to 90% Charging Current (Max.) 1.0A 7A 1.0A 8A+/-1A 1.0A 8A+/-1A Charging Voltage 41.1Vdc ± 0.6V 110Vdc ± 0.4V External Battery type N/A 12V/7.2AH *3 N/A 12V/7.2AH *8 N/A 12V/7.2AH *8 AC to DC Zero Inverter to Bypass 2.5ms (Typical ) LED Indicator Normal (green),warning(yellow),Fault(red) LCD Indicator Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously Sounding UPS Case D x W x H (mm) 400x145x220 460x192x340 Battery Case D x W x H N/A 400*145*220 N/A 460*192*340 N/A 460*192*340 Net Weight(kgs) 14 7 34.5 15 35.5 16 Operating Environment 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) Noise Level <45dB @ 1 Meter 50dB @ 1 Meter Smart RS-232 Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, and MAC SNMP (option) Power management from SNMP manager and web browser


Power Supply

1-

Uninterruptible Power Supply High frequency on line UPS (LCD UPS 1KVA-10KVA) Technical specifications MODEL Capacity Input

Output

Efficiency Battery


Dimension Weight Enviro Nment Interface

VA/W

G1KD 1000VA/700W

G6KND 6000VA/4200W

G6KNDS

G10KND G10KNDS 10000VA/7000W

1

Phase Frequency Range Power Factor Voltage Range

Single Phase with Ground 50Hz:46~54Hz >=0.98 Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%) Line Low Transfer 176 ±3% VAC Line Low Comeback 185 ± 3% VAC Line High Transfer 276 ± 3% VAC Line High Comeback 266 ± 3% VAC Phase Single Voltage 220VAC/230VAC/240VAC Voltage Regulation ± 1% Frequency 46~54Hz ( Synchronized Range) Frequency 50Hz ± 0.05Hz ( Battery Mode) Current Crest Ratio 3:1 Harmonic Distortion ?2% THD (Linear Load) ?6% THD (Non-Linear Load) Output Waveform Pure Sinewave To AC Mode > 88% To Battery Mode > 88% Battery Type 12V/7.2AH Depending on the 12V/9Ah Depending on the capacity of external 20 capacity of external Numbers of Batteries 20 batteries batteries Backup Time 8 minutes 5 minutes (Full Load) Recharge Time 7 hours to 90% 8 hours to 90% Charging Current (Max.) 2.0A 4.2A 2.0A 4.2A Charging Voltage 274Vdc ± 1%V External Battery type N/A 12V/7.2AH *20 N/A 12V/9AH *20 AC to DC Zero 2.5ms (Typical ) Inverter to Bypass LED Indicator Normal (green),warning(yellow),Fault(red) LCD Indicator Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously Sounding UPS Case D x W x H (mm) 570x260x717 Battery Case D x W x H 570*260*717 Net Weight(kgs) 84 35 93 38 Operating Environment 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) Noise Level <55dB @ 1 meter <55dB @ 1 meter Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, Smart RS-232 SNMP (option)

FreeBSD, HP-UX, and MAC Power management from SNMP manager and web browser



Please consult the factory or the distributors for further information of "S" models.

Power Supply

1-8

Uninterruptible Power Supply High frequency on line UPS (LCD UPS 10KVA-0KVA) Application

1

■

10KVA ~ 20KVA ( IP/OP: 220VAC/380Vac)

Key features ■ ■ ■ ■ ■ ■

Microprocessor Control Guarantees High Reliability; Comprehensive Self-Protection Design; Audible Alarm Mute; Cold Start Function; Auto Self-Testing System while Turning On UPS; Wide Input Voltage Range.

Technical specifications MODEL Capacity Input

Output

Efficiency Battery

Transfer time Operation interface

VA/W Phase Frequency Range Power Factor Acceptable Voltage Voltage Line Low Transfer Range Line Low Comeback Line High Transfer Line High Comeback Phase Voltage Voltage Regulation Frequency ( Synchronized Range) Frequency ( Battery Mode) Current Crest Ratio Harmonic Distortion Output Waveform To AC Mode To Battery Mode Battery Type Numbers of Batteries Backup Time (Full Load) Recharge Time Charging Current (Max.) Charging Voltage AC to DC Inverter to Bypass LED Indicator LCD Indicator


Audible alarm Battery Mode Low Battery Overload Fault Dimension UPS Case D x W x H (mm) Weight Net Weight(kgs) Environment Operating Temperature Noise Level Interface Smart RS-232 SNMP (option)

3G10KNDS 10000VA/7000W

3G15KNDS 15000VA/10500W

3G20KNDS 20000VA/14000W

Three Phase with Ground 46~54Hz >=0.95 60~138 Vac 304VAC +/- 3VAC 322VAC +/- 3VAC 478VAC +/- 3VAC 361VAC +/- 3VAC Single 380VAC/220VAC/230VAC/240VAC ± 1% 46~54Hz 50 ± 0.05 Hz 3:01 ＜2% THD ( Linear Load) / ＜6% THD ( Non-Linear Load) Pure Sinewave 88% Depending on the capacity of external batteries.

4.2A 274Vdc ± 1%V Zero Zero Normal (green),warning(yellow),Fault(red) Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Sounding every 4 seconds Sounding every second Sounding twice every second Continuously Sounding 570x260x717 38.5 55 55 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) <60dB @ 1 Meter Windows 98/NT/2000/XP/2003/ME, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, amd MAC Power management from SNMP manager and web browser



Power Supply

1-9

Uninterruptible Power Supply High frequency on line UPS (UPS 0KVA-80KVA) Application ■

1

3/3G20KXL~3/3G80KXL (IP/OP:380Vac)

Key features True Galvanic Isolation Advanced technology DSP, IGBT, and switching components ■ Plug and Play Modular Design ■ Cold Start Function ■ Multi-CPU design and software/hardware cooperate control ■ Defense to miss-operation ■ Input Protection ■ Software and Hardware Redundant Design ■ Intelligent charger and battery testing system ■ Emergent Stop is Available ■ Variety of Accessories / Options ■ ■

Technical specifications

Battery

Output

STatic switch Operation Interface Overall charac teristics

KVA Voltage Voltage range Frequency Power walk in Efficiency Voltage Regulation Battery type/pcs Maximum charge current adc (selectable) Battery start Voltage Waveform Power factor Frequency lock range Frequency (Free running) Phase shift under 100% unbalance load Thd (linear load) Overload <110% protection 110-125% 125-150% >150% Efficiency (100% load) Voltage range Mains<-->inverter LED Indicator LCD Indicator Overall efficiency Maximum heat dissipation (kw) Dimention (hxwxd) mm Weight (kg w/o bat.) for standard input 380v y Audible noise@1m

3-Phase Input / 3-Phase Output 3-Phase Input/1-Phase Output 20 30 40 50 60 80 20 30 40 50 220Vac / 380Vac / 460Vac , 208Vac / 380Vac / 400Vac /415Vac ± 20% (>± 20% IS AVAILABLE UPON REQUEST) 50 / 60 Hz ± 7% 0% - 100% : 20 SECONDS ALMOST 98% ± 1% MAINTENANCE FREE LEAD-ACID BATTERIES / 12V X 29 PCS 10 15 20 25 30 40 10 15

25

YES, UPS CAN BE STARTED WITHOUT AC SOURCE. 220Vac / 380Vac / 460Vac , 208Vac / 380Vac / 400Vac 220/230/240, 1F2? OR 3? /415Vac ± 1% SINEWAVE 0.8 45-55 Hz / 55-65 Hz 50 / 60 Hz ± 0.1 Hz < 0.5° < 2% CONTINUOUS 15 MINUTES 10 MINUTES 1 MINUTE 93% 93% 93.50% 93.50% 94% 94.50% 93% 93% 93.50% 93.50% 173-277 VAC (L-N) 0 MS Normal (green),warning(yellow),Fault(red) Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set 91% 91% 91.50% 92% 92% 92.50% 91% 91% 91.50% 92% 1.3 1.9 2.6 3 3.5 4.6 1.3 1.9 2.6 3 1600X550X800 1600X550X800 300 400 480 550 680 820 300 400 480 550 <65 dBA



20

<67dBA <65 dBA http://www.greegoo.com

PHASE CAPACITY Input

Power Supply

-1

Uninterruptible Power Supply Rack Mount On Line UPS (UPS 1KVA-6KVA) Application ■

Servers, Data centers, Critical network devices, Sensitive electronic equipment Telecom...

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

True on-line double conversion technology with advanced microprocessor control; Wide input voltage range; Zero transfer time; Protection against all type of power problems; Self test while start of the UPS; Site wiring fault warning; On-battery power-on function; Smart RS232 communication interface; Intelligent slot available; Sealed lead-acid, maintenance free battery.

Technical specifications Product Series Model Rated Power VA/W Input Nominal Voltage Voltage Range Frequency Range Power Factor Connection Output Voltage Frequency Waveform Overload Capability

Bypass

Current Crest Ratio Automatic Transfer Before UPS Power-on Voltage Range

Output Connections Transfer Time LED indica- Status tors Audible Alarm Communications

Rack Mount 1~6kVA G1KR G2KR G3KR 1kVA / 0.7kW 2kVA / 1.4kW 3kVA / 2.1kW 220VAC 115 ~ 300VAC 46 ~ 54Hz(default), user adjustable within 40~60Hz 0.97 IEC320-10A inlet IEC320-16A inlet 220VAC ± 2% 46~54Hz or 50Hz ± 0.2Hz (Line mode) 50Hz ± 0.2Hz ( Battery mode) Sine Wave 108%~150% for 30 sec., ≥150% for 300 ms

G6KR 6kVA/4.2kW 176 ~ 276VAC 46 ~ 54Hz 0.98 Terminal Block 220VAC ± 1% 46~54Hz (Line mode) 50Hz ± 0.05Hz ( Battery mode) 105%~130% for 10 min., ≥130% for 1 min.

3:01 on overload and UPS failure Default “NO”, user adjustable to “YES” Yes 80~264VAC (Default), user adjustable within 176 ~ 261VAC 80~286VAC IEC320 -10A * 4 IEC320-10A * 4 IEC320-10A and IEC320-10A * 4 and Terminal Block Terminal Block 0 ms; less than 4 ms from inverter to bypass and vice Zero versa Load level / Battery level, Battery , Utility Power, Inverter, Bypass, Overload, Fault

Notes: G1KRS, G2KRS, G3KRS & G6KRS for longer Backup time with additional Battery Packs are available, please consult local distributors.



Bypass, On battery mode, Battery low, Overload, Fault RS-232 Serial Interface Intelligent Slot; OPTIONS: WEBPOWER SNMP/WEB card, AS400 card or WinPower CMC) Network Surge Protection RJ45 I/O port available for network or Fax/Modem Environmental Operating Temperature 0˚C~ 40˚C Operating Humidity 20 ~ 90% non-condensing Main Unit Net Weight (Kg) 15.3 10.3 11.2 18.3 Dimensions (W x D x H) mm 482.6 x 450 x 88 (2U) 482.6 x 600 x 130 (3U) Battery Pack Type Internal Batteries External Battery Pack Nominal DC Voltage 36VDC 96VDC 240VDC Backup Time (Full load) 5 min 9 min 5 min 7 min (with 1 BP) (with 1 BP) (with 1 BP) Net Weight (Kg) -25.3 58.2 Dimensions (W x D x H) mm -482.6 x 450 x 88 (2U) 482.6 x 600 x 130 (3U)

Power Supply

-

Uninterruptible Power Supply Rack Mount On Line UPS (UPS 1KVA-3KVA 110Vac)

Key features ■ ■ ■ ■

Comprehensive Self-Protection Design; Audible Alarm Mute; Cold Start Function; Auto Self-Testing System while Turning On UPS;

■ ■ ■

Wide Input Voltage Range; Tower and Rack Mount Available; 19" Rack Mount Available.

Products Specification MODEL Capacity Input

Output

GR1KD GR1KDS GR2KD GR2KDS VA/W 1000VA/700W 1500VA/1050W Phase Single Phase with Ground Frequency Range 50Hz: 46~54Hz / 60Hz : 56~64Hz Power Factor >=0.95 Acceptable Voltage 60~138 Vac Voltage Base on load percentage (100%-70% / 70%-60% / 60%-50% / 50%-40% / 40% - 0%) Range Line Low 80VAC/70VAC/70VAC/60VAC/60VAC Transfer Line Low 85VAC/85VAC/75VAC/75VAC/65VAC Comeback Line High Transfer 138VAC Line High Comeback 133VAC Phase Single Voltage 110VAC/115VAC/120VAC Voltage Regulation ± 2% Frequency 50Hz : 46~54Hz / 60Hz : 56~64Hz ( Synchronized Range) Frequency ( Battery Mode) Current Crest Ratio Harmonic Distortion

Efficiency Battery

Output Waveform To AC Mode To Battery Mode Battery Type Numbers of



Dimension

Weight

Batteries Backup Time (Full Load) Recharge Time Charging Current (Max.) Charging Voltage External Battery Type AC to DC Inverter to Bypass LED Indicator LCD Indicator Battery Mode Low Battery Overload Fault UPS Case D x W x H (mm) Battery Case D x W x H (mm) Net Weight(kgs)

Environment Operating Temperature Noise Level Interface Smart RS-232 SNMP (option)

GR3KD GR3KDS 3000VA/2100W

50/60Hz / ± 0.2 Hz 3:01 5% THD ( Linear Load) / 10% THD ( Non-Linear Load) Pure Sinewave 85% 83% 12V/7.2Ah Depending on the capacity 3 of external

83% 82% 12V/7.2Ah 4

86% 83% 12V/7.2AH

Depending on the capacity of external 8 batteries

D e p e nding o n t h e capacity of external batteries

batteries >5 minutes

>5 minutes

>5 minutes

8 hours to 90% 1.0A 7.8A 41.1Vdc / ±0.6V N/A 12V / 7.2 AH * 6

8 hours to 90% 1.0A 7.8A 54.9Vdc / ±0.4V N/A 12V / 7.2 AH *8

8 hours to 90% 1.0A 7.8A 110Vdc / ±0.4V N/A 12V / 7.2 AH * 8

Zero 2.5ms (Typical ) Zero Normal (green),warning(yellow),Fault(red) Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Sounding every 4 seconds Sounding every second Sounding twice every second Continuously Sounding 400x145x220 465x145x220 465x192x340 N/A

400x145x220 N/A

465x145x220

N/A

465x192x340

13(w. Battery) 7

1 7 . 5 ( w .9 33(w. Battery) 12 Battery) 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) <45dB @ 1 Meter <45dB @ 1 Meter <50dB @ 1 Meter Windows 98/NT/2000/XP/2003/ME, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, amd MAC Power management from SNMP manager and web browser


Power Supply

-3

Uninterruptible Power Supply Rack Mount On Line UPS (UPS 1KVA-6KVA 0Vac) Key features ■ ■ ■ ■ ■ ■ ■ ■

Microprocessor Control Guarantees High Reliability; Comprehensive Self-Protection Design; Audible Alarm Mute; Cold Start Function; Auto Self-Testing System while Turning On UPS; Wide Input Voltage Range; Tower and Rack Mount Available; 19" Rack Mount Available.

Products Specification GR1KD GR1KDS GR2KDS GR2KDS GR3KD GR3KDS 1000VA/700W 2000VA/1400W 3000VA/2100W Single Phase with Ground 50Hz:46~54Hz >=0.97 Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%) Line Low Transfer 160VAC/140VAC/120VAC/110VAC± 5VAC Line Low Comeback 175VAC ± 5VAC Line High Transfer 300VAC± 5VAC Line High Comeback 285VAC± 5VAC Output Phase Single Voltage 220VAC/230VAC/240VAC Voltage Regulation ± 2% Frequency 46~54Hz ( Synchronized Range) Frequency 50 ± 0.2 Hz ( Battery Mode) Current Crest Ratio 3:01 Harmonic Distortion <3% THD <4% THD ( Linear Load) ( Linear Load) <7% THD ( Non-Linear Load) <6% THD ( Non-Linear Load) Output Waveform Pure Sinewave Efficiency To AC Mode 85% 85% 85% To Battery Mode 83% 83% 83% Battery Battery Type 12V/7.2Ah Depending on 12V/7.2Ah Depending on 12V/7.2Ah Depending on the capacity 8 the capacity 8 the capacity Numbers of Batteries 3 of external of external of external Backup Time >5 minutes >9 minutes >5 minutes batteries batteries batteries (Full Load) Recharge Time 5 hours to 90% 5 hours to 90% 5 hours to 90% Charging Current (Max.) 1.0A 7A 1.0A 8A+/-1A 1.0A 8A+/-1A Charging Voltage 41.1Vdc ± 0.6V 110Vdc ± 0.4V External Battery type N/A 12V/7.2AH *6 N/A 12V/7.2AH *8 N/A 12V/7.2AH *8 Transfer AC to DC Zero time Inverter to Bypass 2.5ms (Typical ) Operation LED Indicator Normal (green),warning(yellow),Fault(red) interface LCD Indicator Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Audible Battery Mode Sounding every 4 seconds alarm Low Battery Sounding every second Overload Sounding twice every second Fault Continuously Sounding Dimension UPS Case D x W x H (mm) 400x145x220 460x192x340 Battery Case D x W x H N/A 400*145*220 N/A 460*192*340 N/A 460*192*340 Weight Net Weight(kgs) 14(w / battery) 7 34.5(w / 15 35.5(W / 16 Battery) Battery) Enviro Operating Environment 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) Nment Noise Level <45dB @ 1 Meter 50dB @ 1 Meter Interface Smart RS-232 Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, and MAC SNMP (option) Power management from SNMP manager and web browser


VA/W Phase Frequency Range Power Factor Voltage Range


MODEL Capacity Input

Power Supply

2-

Uninterruptible Power Supply Rack Mount On Line UPS (UPS 1KVA-6KVA 220Vac) Products Specification


2

MODEL Capacity Input

GR6KD GR6KDS 6000VA/4200W Single Phase with Ground 50Hz:46~54Hz >=0.98 Base on load percentage (100%-80% / 80%-70% / 70%-60% / 60%-0%) Line Low Transfer 176 ±3% VAC Line Low Comeback 185 ± 3% VAC Line High Transfer 276 ± 3% VAC Line High Comeback 266 ± 3% VAC Output Phase Single Voltage 220VAC/230VAC/240VAC Voltage Regulation ± 1% Frequency 46~54Hz ( Synchronized Range) Frequency 50Hz ± 0.05Hz ( Battery Mode) Current Crest Ratio 3:1 Harmonic Distortion <2% THD (Linear Load) <6% THD (Non-Linear Load) Output Waveform Pure Sinewave Efficiency To AC Mode > 88% To Battery Mode > 88% Battery Battery Type 12V/7.2AH Depending on the capacity of external batteries Numbers of Batteries 20 Backup Time 8 minutes (Full Load) Recharge Time 7 hours to 90% Charging Current (Max.) 2.0A 4.2A Charging Voltage 274Vdc ± 1%V External Battery type N/A 12V/7.2AH *20 Transfer AC to DC Zero time Inverter to Bypass Zero Operation LED Indicator Normal (green),warning(yellow),Fault(red) interface LCD Indicator Status,Voltage,Frequency,Battery Status,Temperature,History Record,Voltage set Audible Battery Mode Sounding every 4 seconds alarm Low Battery Sounding every second Overload Sounding twice every second Fault Continuously Sounding Dimension UPS Case D x W x H (mm) 570x260x717 Battery Case D x W x H 570*260*717 Weight Net Weight(kgs) 84(W / Battery) 35 Enviro Operating Environment 0~40 Degrees Centigrade, 20~90% relative humidity (non-condensing) Nment Noise Level <55dB @ 1 meter Interface Smart RS-232 Windows 98/NT/2000/XP/2003, Linux, Sun Solaris, IBM Aix, Compaq True64, SGI IRIX, FreeBSD, HP-UX, and MAC SNMP (option) Power management from SNMP manager and web browser VA/W Phase Frequency Range Power Factor Voltage Range


Power Supply

3-1

Uninterruptible Power Supply Line interactive UPS Application ■

3/3G20KXL~3/3G80KXL (IP/OP:380Vac).

3

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■

Controlled By Twin Microprocessor; Line-Interactive Design. Pure sin wave output.; AC startup with no Battery avoid spike when connect batteries; Hot-Swap Batteries; DC-Start mode (cold-start); Voltage Sensitivity adjust button; Three-stage AVR (auto voltage regulation) Auto Buck/Boost mode; Speed Controlled Fan; High Input Voltage Range (145Vac~290Vac); High Input frequency range (66HZ to 44HZ); High Voltage & Overload & Short circuit Protections, RJ-45 surge Protection; Load Level & Battery Level Monitor on Front Panel; LCD panel (optional); Long Backup Time (XL type); True RS232/Dry Contact two way computer interface, RUPS protocol; SNMP Slot (optional), USB interface (optional); Specially designed for PC users, Servers, Workstations, Critical network devices , Data-Center & Telecom equipment ...etc; Bondle Monitor software support Win98/NT/2000/XP & Linux/FreeBSD/Netware; Optional Monitor software support all UNIX system.

Functions Smart Intelligent Battery Management system means longer battery life Improved reliability results from a precision Smart Battery Charging System, and automatic true-load battery tests. Redundant overcharge protection and continuous, nonplused charging also contribute to longer battery life. ■

Sine - wave output A-Smart UPS sine-wave output provides assurance of compatibility with all loads. ■

Line-interactive design delivers unmatched performance and reliability Innovative line-interactive design uses the DC to AC power inverter "in reverse" as a battery charger during normal operation providing greater performance, filtering inefficiency. F-ewer components under stress results in greater reliability than inefficient double conversion, on-line UPS units. Line-interactive topology is approximately. 98% efficient, which leads to extremely high reliability. In contrast most online operate at approximately 70% efficiency, which produces life-cycle costs 30% higher. Worse, the excess energy from an on-line UPS becomes heat which damages batteries and decreases reliability. ■

Line-interactive design delivers Network Interface Port adds automatic safe system shutdown Once installed, an A-Smart UPS will interface with your network via serial port to perform automated safe shutdown. Power failures can occur at night, on weekends, or while the system administrator is out of the building, which makes automated safe shut-down critical. A-Smart UPS communications port means the ability to coordinate a safe shutdown with most popular operating systems by Novell, IBM, Microsoft, Banyan, UNIX, and others. You can also manage UPS power and diagnose power problems using Upsilon2000 UPS monitor software. ■

SNMP SLOT adds completely UPS Networks Management A-Smart UPS includes SNMP Slot that you can Install internal SNMP Card(Optional) for up-rade A-Smart UPS Management of networks.(also can install external SNMP Box via UPS communication port) ■

ONLINE Hot-Swap user Friendly, Hot swappable battery replacement System Saves the time and expense of returning the UPS to the factory for Battery service, And allows safe and easy replacement of batteries while your system is up and running. Replacement battery kits ship in a reusable box for convenient return of exhausted batteries to a recycling center or to Netion.



■

Power Supply

3-

Uninterruptible Power Supply Line interactive UPS Protect

3

Lightning and surge protection shields hardware when measured via IEEE 62.41 Category "A" tests, the suppression performance of the A-Smart UPS is superior to virtually all separate surge suppressors. ■

Network-grade line conditioning prevents glitches Full time EMI/RFI filters prevent line noise from causing data errors， A-Smart UPS meets Novell and Microsoft's approval for network protection, without the need for additional external conditioners. ■

Super-Boost automatically corrects brownout conditions Allows you to work through brownouts without unnecessary battery drain. Super Boost automatically Twostage up low voltage to safe output levels. ■

Smart-Back Trim automatically corrects overvoltage conditions Allows you to work through overvoltages without unnecessary battery drain. Smart-Back Trim automatically steps down high voltage to safe output levels. ■

Messages Battery Replacement Warning prevents downtime A-Smart UPS automatically performs a self-test every two weeks. This ensures you will be alerted to degraded batteries before they wear out. Through software, or the push of a button, you may perform self-tests anytime. ■

Informative LED Display provides status at a glance Instantly assess the status of your power and the A-Smart UPS without even pushing a button. Bar meters and status indicators are simple to use and easy to understand. Visible and audible alarms alert you to fault conditions. ■

Load and Battery Meters keep you in control The Load Meter prevents you from exceeding UPS capacity. The battery Meter reports battery capacity, allowing you to gauge how much time you have before batteries are depleted. An alarm sounds when batteries are low, allowing you time to save data and shutdown the system.


■


Power Supply

3-

Uninterruptible Power Supply Line interactive UPS Diagram of net agent UPS networks monitor:

3

For UPS Network Monitor completely, you can use Net Agent internal card or external box Net Agent Feature: 1.provide SNMP MIB to monitor & control UPS 2.Auto-sense 10 Base-T/100M Fast Ethernet 3.Support TCP/IP, UDP, SNMP, Telnet, SNTP,PPP,HTTP,SMTP Protocol 4.Providing easy setup and upgrade tools via MS-Windows, no more traditional RS232 complicated setting nightmare 5.Sending TRAP and E-mail for events notifications simultaneously 6.Auto email daily UPS history report 7.environment Measurement (Optional) 8.External modem dial in/out via PPP protocol (Optional)



Diagram of net agent use in UPS networks monitor:

Power Supply

3-

Uninterruptible Power Supply Line interactive UPS Specification

3

Model Name


Input voltage type Allowable range Input protection Boost/Buck Range Input frequency Transfer time Output voltage (Inverter) Output frequency (Inverter) Output waveform (Inverter) Output capacity Characteristics Protections Total Battery Voltage Recharge time Backup Full time Load Half Load Auto turn on Comm. interface User interface LED displays Audible sound Operating temperature Store temperature Surge protection approvals Safety approvals EMI approvals Dimension (H*W*D)(mm) Net Weight

A-Smart 1000(XL) 1KVA 120Vac 230Vac




80~132 145~290 Vac Vac Circuit Breaker




120V±5%

120V±5%

120Vac　　92~103Vac(2 stage)/132~150Vac(1 stage) 230Vac　 184~206Vac(2 stage)/264~300Vac(1 stage) 50/60Hz(Auto Selectable) 2~3.5ms(Normal Load) Max:<10ms 120V±5%

230V±5%

120V±5%

230V±5%

230V±5%

230V±5%

50/60Hz±0.1Hz

50/60Hz±0.1Hz

50/60Hz±0.1Hz

50/60Hz±0.1Hz

Pure sinewave

Pure sinewave

Pure sinewave

Pure sinewave

1000VA/660W(700W)

2000VA/1400W

3000VA/2100W

6000VA/4200W

48Vac

48Vac

12 Hours(24 Hours)

18 Hours(24 Hours)

10min(2...hr)

12min(2...hr)

20min(4...hr)

25min(4...hr)

12/20/30min (2/4/6hr)

12/20/30min (2/4/6hr)

Front : Battery Charge, Load Level ,On-Line, Over Load, Buck, Boost, On-Battery, Battery weak Back : Voltage Sensitivity(Generator Mode),Site Fault 40dBA 50dBA

50dBA

50dBA

0~40℃

0~40℃

0~40℃

0~40℃

-15℃ ～ +45℃

-15℃ ～ +45℃

-15℃ ～ +45℃

-15℃ ～ +45℃

CISPER22 CLASS B 　FCC CLASS B 216*170.5*380 432*196*546

432*196*546

432*196*546

18.5Kg(15.5Kg)

50.3Kg(38Kg)

91.8Kg(71Kg)

True Line-Interactive design High Voltage & Overload & Short Circuit & Low Battery 24Vdc/36Vdc/ 48Vac (48Vac) 3~8 Hours(24 Hours)

12 Hours(24 Hours)

6/10 min 20min(2.5...hr) (2/4/6...hr) 12/20min 40min(5...hr) (4/8/12...hr) 12/20/30min 12/20/30min (2/4/6hr) (2/4/6hr) Ture RS232 / Dry Relay Contact two way LED Display LCD(optional)

IEEE C62.41 CATEGORY A

UL/TUV

46.8Kg(32Kg)



Power Supply

3-

Uninterruptible Power Supply Blazer (modified sine wave output waveform) Application ■

PCs, Workstations, Small servers, POS systems, Critical electronic devices

3

Key features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Microprocessor control guarantees high reliability; Equipped with AVR to stabilize output voltage; Wide input voltage range; Generator Compatible; Auto charging even though the UPS is off; Auto restart while AC recovery; On-battery power-on function without AC input; RJ11 Modem/Phoneline surge protection; Full protection against over-discharge, overcharge, overload; Smart RS232 and USB communication interfaces; Sealed lead-acid, maintenance free battery.

Technical specifications

Recharge Time LED indicators Line Mode Battery Mode

Audible Alarm

Fault Battery Mode Battery Low Overload Fault

Acoustic Noise Data Line Surge Protection Communications Environmental Temperature Humidity Weight Net (kg) Dimensions W x D x H (mm)


BLAZER BLAZER 600 BLAZER 800 BLAZER1000 BLAZER1400 BLAZER2000 600/360 800/480 1000/600 1400/840 2000/1080 220VAC 162 ~ 268VAC 50Hz Fuse Non-Fuse breaker IEC320-10A inlet 220VAC ±10% on battery voltage regulation; ±15% on utility voltage regulation 50Hz ±1Hz ( Battery mode) 110% for 5 min., 120% immediate shutdown IEC320-10A * 3 IEC320-10A * 4 Sealed Lead-Acid, Maintenance free 20 min.(a PC with 30 min.(a PC with 23 min. 25 min. 15” monitor) 15” monitor) (two PCs with 15” (two PCs with 15” monitors) monitors) 8 hours to 90% capacity after full load discharge Green LED lighting The 1st green LED lighting; the 2nd to 5th green LEDs indicating load level Green LED flashing The 1st green LED flashing; the 2nd to 5th green LEDs indicating battery capacity level -Red LED lighting Beeping every 10 seconds Beeping every second Beeping every 0.5 seconds Beeping continuously £ 45 dBA RJ11 I/O jacks RS232 and USB ports 0˚C~ 40˚C 20% ~ 90% non-condensing 6 6.5 13.8 14.2 16 100 x 330 x 140 140.2 x 368.3 x 180.4


Product Series Model Rated Power VA/W Input Nominal Voltage Voltage Range Nominal Frequency Protection Connection Output Voltage Regulation Frequency Overload Capability Connections Battery Type Backup Time

Power Supply

-1

Uninterruptible Power Supply Low Frequency On Line UPS 8KVA-30KVA(1Ph Out) GREEGOO GP11 series UPS is single Phase Input and Single Phase Output and the capacity from 8KVA to 20KVA; GP31 series UPS is three phases input & single phase output and the capacity is from 10KVA to 30KVA. They can use in parallel or separately against different request. They suitable for large machine room, data management center, manufacture industry, petrify system, metallurgical industry, power system etc. important area.

FEATURES High Reliable ■ ■ ■ ■ ■

Adopt twin change on line technology, sequester extraneous interference; Favorable overload ability and protection; Design with 100% unbalance protection; 100% Non linear load ability; IGBT, PWM inverter together with digital .

logic power control technology ■

Industrial grade UPS.

Super Safety ■ ■ ■

The output isolate transformer can avoid the destruction of abnormal signal & lightning stroke; With static bypass, repair bypass, battery maintain bypass; Cold start.

Smart ■ ■ ■

Different loading have different use way. Single UPS, 1+1 or N+1 etc; Modular design, easy to repair; Intelligent management for battery pack.

Economic ■

The efficiency of complete system more than 90%, it will be up to 95% or more if ECO mode.

Easy operation ■

LED/LCD display, it’s easy to operate.

Intelligent ■

It can remote management and TVSS through the offered RS232()RS422, optional SNMP Card, RJ45 etc. communicate port.

APPLIANCE ■ ■ ■ ■ ■


Data management equipment and system; Automatic control systems; Hospital; Mini office system; Telecommunication systems; Bank.


■

Power Supply

4-

Uninterruptible Power Supply UPS 8KVA-30KVA(1Ph Out) Technical specifications


4

Model Capacity Input

GP1108 GP1110 GP1115 GP1120 GP3110 GP3115 GP3120 GP3130 8KVA 10KVA 15KVA 20KVA 10KVA 15KVA 20KVA 30KVA Voltage 220VAC±25% (Single phase 2 wires + G) 220/380VAC±20% (Three phases 4 wires + G) Frequency 50Hz ± 10% Power Factor 0.8 ( 0.95 if UPS with filter ) Output Voltage 220VAC±1% (steady state) 220VAC±2% (steady state) Frequency Free synchronized to main (AC Power Mode); 50Hz±0.5%(Battery Mode) Power Factor 0.8 (lagging) Wave Form Sine Wave Distortion £ 3% (linear load), £ 5% (non linear load) Crest Factor 3:01 Transitory Voltage 220VAC ± 4% 220VAC ± 5% Efficiency ³90% Battery Type 12VDC Sealed lead acid battery, maintenance free Nominal Voltage 192VDC (16 PCS) 384VDC (32 PCS) Backup Time As per the request of customer Recharge Time 7 ~ 10 hours up to 90% capacity Charge Current 10~25A (Adjustable) Transfer Time 0 ms ( AC to DC or DC to AC); < 4 ms (Bypass to Inverter or Inverter to Bypass) LCD Display UPS work situation, AC power situation, Battery situation, automatic turn to bypass, overload Overload Ability 150% for 30 seconds, 125% for 10 minutes Protection Over Voltage, Under Voltage, Over Load, Over Temperature, Short Circuit, Lightning Stroke etc. Alarm Over Temperature, Battery, Bypass, AC Power Abnormal, Over Load, Over Voltage Noise ( 1 m distance) £55dB Communicate Interface RS232 (or RS422), SNMP Card (Optional), RJ45 Ambient Temperature 0˚C ~ 40˚C Humidity 10% ~ 90% (no dewfall) Elevation < 2000m Size (mm) 1140x560x800 N.W. (kg) 125 140 175 225 181 235 285 320 EMC IEC62040-2, EN50091,GB9254 Ability of Antijamming IEC61000-4 Protection Degree IP20


Power Supply

-3

Uninterruptible Power Supply Low Frequency On Line UPS 10KVA-300KVA(3Ph out) GREEGOO GP33 series low frequency on line UPS, champion UPS, industrial UPS from 10KVA to 300KVA. It’s designed special for data management center, manufacture industry, petrify system, metallurgical industry, power system etc. It’s adopted twin changing online design, intelligent IGBT module, PWM pulsewidth modulation and several CPU, champion UPS, industrial UPS control technology. It’s the best protection equipment for various kinds of important equipments. It can enlarge the capacity up to 8 units UPS use in parallel.

FEATURES High Reliable ■ ■ ■ ■ ■

Adopt twin change on line technology,sequester extraneous interference; Favorable overload ability and protection; Design with 100% unbalance protection; 100% Non linear load ability; IGBT, PWM inverter together with digital .

logic power control technology ■

Industrial grade UPS.

Super Safety ■ ■ ■

The output isolate transformer can avoid the destruction of abnormal signal & lightning stroke; With static bypass, repair bypass, battery maintain bypass; Cold start champion UPS, industrial UPS.

Smart ■ ■ ■

Different loading have different use way. Single UPS, 1+1 or N+1 etc; Modular design, easy to repair; Intelligent management for battery pack.

Economic ■

The efficiency of complete system more than 90%, it will be up to 95% or more if ECO mode.

Easy operation ■

LED/LCD display, it’s easy to operate.

Intelligent ■

It can remote management and TVSS through the offered RS232()RS422, optional SNMP Card, RJ45 etc. communicate port.

APPLIANCE ■ ■ ■ ■ ■


Data management equipment and system; Automatic control systems; Hospital; Mini office system; Telecommunication systems; Bank champion UPS, industrial UPS.


■

Power Supply

4-

Uninterruptible Power Supply UPS 10KVA-300KVA(3Ph out) Technical specifications

4

Model Capacity Input Voltage Frequency Power Factor Bypass Phase Qty. Voltage Frequency Output Voltage Frequency Power Factor Wave Form Distortion Transitory Voltage of dynamic load Transitory recover time Unbalance Voltage Overload Ability Crest Factor Efficiency Battery Type Nominal Voltage Recharge Time Charge Current Transfer time LCD Display Protection Alarm Noise ( 1 m distance) Communicate Interface Cooling way Ambient Temperature Humidity Elevation Size (mm)


N.W. (kg) EMC Ability of Antijamming Protection Degree

GP3310 GP3315 GP3320 GP3330 10KVA 15KVA 20KVA 30KVA 220/380VAC±20% (Three phases +N + G) 50Hz ± 10% 0.8 (0.95 if lagging) Three phases 4 wires + G 380V ± 15% 50Hz ± 2% 380VAC±1% (steady state) 50Hz±5% (AC Power Mode); 50Hz±0.1%(Battery Mode) 0.8 (lagging) Sine Wave = 3% (linear load), = 5% (non linear load) ±5% (0 ~ 100% Decrease step by step)

GP3340 40KVA

GP3360 60KVA

< 10ms (±5%) < 3%, <1%( balanced load) 150% for 1 minute, 125% for 10 minutes, more than 150% for 200ms 3:1 > 90%, 95% (ECO mode) 12VDC Sealed lead acid battery, maintenance free 384VDC (32PCS) < 10 hours up to 90% capacity 10~25A (Adjustable) 0 ms ( AC to DC or DC to AC); < 4 ms (Bypass to Inverter or Inverter to Bypass) UPS work situation, AC power situation, Battery situation, automatic turn to bypass, overload Over Voltage, Under Voltage, Over Load, Over Temperature, Short Circuit, Lightning Stroke etc. Over Temperature, Battery, Bypass, AC Power Abnormal, Over Load, Over Voltage < 50dB < 55dB < 65dB RS232 (or RS422), SNMP Card (Optional), RJ45 Fan 0 ? ~ 40 ? 10% ~ 90% (no dewfall) < 2000m 700x520x1100 800x600x1200 900x660× x1500 210 258 350 400 480 650 IEC62040-2, EN50091-2, GB9254 IEC61000-4 IP20


Power Supply

4-

Uninterruptible Power Supply UPS 10KVA-300KVA(3Ph out) Technical specifications

Recharge Time Charge Current Transfer time LCD Display Protection Alarm Noise ( 1 m distance) Communicate Interface Cooling way Ambient Temperature Humidity Elevation Size (mm) N.W. (kg) EMC Ability of Antijamming Protection Degree


GP3380 GP33100 GP33120 GP33140 GP33160 GP33200 GP33250 80KVA 100KVA 120KVA 140KVA 160KVA 200KVA 250KVA 220/380VAC±20% (Three phases +N + G) 50Hz ± 10% 0.8 (0.95 if lagging) Three phases 4 wires + G 380V ± 15% 50Hz ± 2% 380VAC±1% (steady state) 50Hz±5% (AC Power Mode); 50Hz±0.1%(Battery Mode) 0.8 (lagging) Sine Wave = 3% (linear load), = 5% (non linear load) ±5% (0 ~ 100% Decrease step by step)

GP33300 300KVA

4

< 10ms (±5%) < 3%, <1%( balanced load) 150% for 1 minute, 125% for 10 minutes, more than 150% for 200ms 3:1 > 90%, 95% (ECO mode) 12VDC Sealed lead acid battery, maintenance free 384VDC 396VDC(33PCS) (32PCS) < 10 hours up to 90% capacity 10~25A (Adjustable) 0 ms ( AC to DC or DC to AC); < 4 ms (Bypass to Inverter or Inverter to Bypass) UPS work situation, AC power situation, Battery situation, automatic turn to bypass, overload Over Voltage, Under Voltage, Over Load, Over Temperature, Short Circuit, Lightning Stroke etc. Over Temperature, Battery, Bypass, AC Power Abnormal, Over Load, Over Voltage < 65dB < 68dB RS232 (or RS422), SNMP Card (Optional), RJ45 Fan 0˚C~ 40˚C 10% ~ 90% (no dewfall) < 2000m 1250x900x1600 2000x900x1800 900 1100 1200 1250 1380 1520 IEC62040-2, EN50091-2, GB9254 IEC61000-4 IP20

2400x900x1800 1650 1800


Model Capacity Input Voltage Frequency Power Factor Bypass Phase Qty. Voltage Frequency Output Voltage Frequency Power Factor Wave Form Distortion Transitory Voltage of dynamic load Transitory recover time Unbalance Voltage Overload Ability Crest Factor Efficiency Battery Type Nominal Voltage

Power Supply

-1

Uninterruptible Power Supply Battery Cabinet Technical parameter Name

Model No.

Specification

Battery

Weight (KGS)

Packing Measure (LxWxH)mm

Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet Battery Cabinet

A1 A2 A3 A4 A6 A8 A10 A12 A16

462x200x295 458x382x294 617x470x305 500x420x613 617x470x613 780x470x632 959x470x632 780x470x915 780x470x1210

100Ah 1 PC 100Ah 2 PCS 100Ah 3 PCS 100Ah 4 PCS 100Ah 6 PCS 100Ah 8 PCS 100Ah 10 PCS 100Ah 12 PCS 100Ah 16 PCS

5 8 13 17 21 24 30 34 45

A20

959x470x1210

100Ah 20 PCS

53

B7081

482.6x450x88

7Ah 8 PCS

26.5

480x220x330 480x390x280 600x450x210 640x490x210 640x490x210 800x490x210 980x490x200 800x490x330 800x490x220 1180x490x90 980x490x230 1180x490x90 600x600x265



Notes: 1.The above weight without including the weight of battery. 2.The package is one package for one set of battery group. 3. The space of 100Ah battery cabinet 1 nos is equal to 24Ah 3 nos, 38Ah battery 2 nos and 65Ah battery 1 nos.

1000 Watts Ups Circuit Diagram

Recommend Documents