How to get Parameter and Measurement LTE NokiaDeskripsi lengkap
Comparation LTE parameter between 2 different Radio Operation TypeFull description
Comparation LTE parameter between 2 different Radio Operation TypeDeskripsi lengkap
test trgfg
OptiX OSN 8800/6800/3800
Lte Ran Ericsson Nokia Parameter Mapping
Nokia Solution
NSN Parameter Configuration RAS06 v1 0
nokia objectsFull description
parameter
Lte Ran Ericsson Huawei Nokia Parameter MappingDeskripsi lengkap
Descripción completa
Full description
Full description
RU50 Feature Descriptions and Instructions
Full description
NSN FeaturesFull description
Descripción completa
Parameter Configuration
RN31632EN50GLA0
1
Parameter Configuration
RN31632EN50GLA0
2
Parameter Configuration
RN31632EN50GLA0
4
Parameter Configuration
Dashed boxes are related to optional features
RN31632EN50GLA0
5
Parameter Configuration
Dashed boxes are related to optional features
RN31632EN50GLA0
6
Parameter Configuration
RN31632EN50GLA0
7
Parameter Configuration
RN31632EN50GLA0
8
Parameter Configuration
RN31632EN50GLA0
9
Parameter Configuration
RN31632EN50GLA0
10
Parameter Configuration
RN31632EN50GLA0
11
Parameter Configuration
RN31632EN50GLA0
12
Parameter Configuration
RN31632EN50GLA0
13
Parameter Configuration
RN31632EN50GLA0
14
Parameter Configuration
RN31632EN50GLA0
15
Parameter Configuration
RN31632EN50GLA0
16
Parameter Configuration
If feature RAN1191: “Detected Set Reporting (DSR) & Measurements” is enabled, specific counters (M1028 Autodef SHO DSR measurement) can be used to find detected set cells that are reported by the UE but that are not in the ADJS or ADJD adjacency lists and cannot therefore be targets of SHO. With that information the neighbor lists can be optimized to include such cells that would be good handover targets.
The parameter DSRepBasedSHO indicates whether the DSR based SHO is enabled in the cell. When the Detected Set Reporting & Measurements feature (optional) is enabled in the RNC, the parameter can have the following values:: 0: DSR is not allowed. 1: DSR is enabled but SHO to detected cell is not allowed. When the SHO based on the Detected Set Reporting feature (optional) is enabled in the RNC, the parameter can have the following values: 0: DSR is not allowed. 2: DSR based SHO is enabled.
