Security Level:
RAN Commisioning BTS3911E www.huawei.com
Author/ Email: Igor Atanasovski October 2016 HUAWEI TECHNOLOGIES CO., LTD.
Physical layout and ports - BTS3911E
HUAWEI TECHNOLOGIES CO., LTD.
2
Physical layout and ports - BTS3911E Port
Description
1) GPS
Port for connecting GPS antennas to achieve clock synchronization
2) TF
Anchor slot for the trans flash card (TF card, also called micro SD card) for BTS3911E deployment
3) USB WIFI
Wi-Fi port for zero-touch maintenance and deployment
4) 5) 6) 7)
Ports used to transmit and receive RF signals
8)
Grounding
9) EXT-ALM
Dry contact alarm port for monitoring the alarm status of external devices
10) CPRI
Reserved port
11) PWR
Power input port
12) FE/GE0, 13) FE/GE1
Electrical port
14) DBG
Commissioning port
15) FE/GE2, 16) FE/GE3
Optical port
HUAWEI TECHNOLOGIES CO., LTD.
3
LMT – BTS3911E wired
1. Wired connection :
Connect the Ethernet port of the LMT PC to the DBG port of the BTS3911E with a crossover cable.
BTS IP = 192.168.0.49 and PC IP = 192.168.0.50
HUAWEI TECHNOLOGIES CO., LTD.
4
Access the web LMT
The LMT is accessible via HTTPS with Internet Explorer;
BTS3911E: The address is: https:// 192.168.0.49/
The address should be added to the trusted sites
The compatibility mode should be enabled
The user name is admin
The password is hwbs@com
HUAWEI TECHNOLOGIES CO., LTD.
5
FTP server parameters The FTP Tool can be downloaded directly from the Web LMT of the BTS, top-right side of the i nterface
The working directory should contain the unpacked software package with the correct version
HUAWEI TECHNOLOGIES CO., LTD.
6
Downloading the software on BTS3911E
DLD SOFTWARE: IP="192.168.0.50", USR=“admin",
PWD=“hwbs@com", DIR="D:\FTP\files", SWT=SOFTWARE, DL=No, SV="BTS3911E V100R011C00SPC160";
The red highlited fields should be modified as follows :
IP = PC’s IP. Should be changed depending on connection scenario
USR = user name for access the local FTP. Can be configured by right clicking the green spot in the taskbar and going to properties;
PWD = password for access the local FTP. Can be configured by right clicking the green spot in the taskbar and going to properties;
DIR = the local path where the software package is stored.
HUAWEI TECHNOLOGIES CO., LTD.
7
Activating the software
For BTS3911E ACT SOFTWARE:OT=NE,SV="BTS3911E V100R011C10SPC160";
The BTS will restart;
HUAWEI TECHNOLOGIES CO., LTD.
8
Downloading the CFG file on BTS3911E
DLD CFGFILE: IP="192.168.0.50", USR="admin",
PWD=“hwbs@com", DIR="D:\FTP\files", FN="CFGDATA.XML", FT=XML, ENCRYPTMODE=UNENCRYPTED;
The red highlited fields should be modified as follows:
IP = PC’s IP. Should be changed depending on connection scenario
USR = user name for access the local FTP. Can be configured by right clicking the green spot in the taskbar and going to properties;
PWD = password for access the local FTP. Can be configured by right clicking the green spot in the taskbar and going to properties;
DIR = the local path where the software package is stored;
FN = name of the configuration file, together with the extension.
HUAWEI TECHNOLOGIES CO., LTD.
9
Activating the CFG file on BTS3911E
ACT CFGFILE: EFT=AFTER_RESET;
HUAWEI TECHNOLOGIES CO., LTD.
10
Thank you www.huawei.com Copyright© 2011 Huawei Technologies Co., Ltd. All Rights Reserved. The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.