Web LMT Help
Issue
V 1.0
Date
2012-03-15
HUAWEI TECHNOLOGIES CO., LTD.
Guide to interconnect two APM30H with one IBBS200D
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. Address
Huawei Industrial Base, Bantian, Longgang, Shenzhen Postal Code: 518129
Website
http://www.huawei.com
Email
[email protected]
Telephone
0755-28560000 4008302118
Fax
0755-28560111
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 2 of 12
Guide to interconnect two APM30H with one IBBS200D
Contents 1 Log in Web LMT ........................................................................................................................... 4 2 Obter Configuração ...................................................................................................................... 5 2.1 Configuração de boards .................................................................................................................................... 5 2.2 Configuração de célula ..................................................................................................................................... 5 2.3 Listar Versão de Software................................................................................................................................. 6
3 Verificar status ............................................................................................................................... 6 3.1 Verificar status da célula................................................................................................................................... 6 3.2 Verificar status do link para o CN .................................................................................................................... 7 3.3 Verificar status do interface S1 ......................................................................................................................... 8 3.4 Verificar status do link para o OMC (M2000) .................................................................................................. 9
4 Upgrade e Configuração ............................................................................................................ 10 4.1 Activar o FTP server....................................................................................................................................... 10 4.2 Copiar software para o eNode B e activar a configuracão ............................................................................. 11
5 Alarms ........................................................................................................................................... 12
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 3 of 12
Guide to interconnect two APM30H with one IBBS200D
1
Log in Web LMT
Alterar o IP do computador para pe: 192.168.0.50 (com máscara 255.0.0.0).
O IP do e Node B é: 192.168.0.49. Para aceder ao Web LMT abrir o Internet Explorer e colocar este IP. Não devem ter proxy selecionadas. Password = admin123 – User = admin
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 4 of 12
Guide to interconnect two APM30H with one IBBS200D
2
Obter Configuração
2.1 Configuração de boards LST BRD:;
2.2 Configuração de célula Para obter o cell id e EARFCN executar o comando LST CELL:;
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 5 of 12
Guide to interconnect two APM30H with one IBBS200D
Para obter o TAC (Tracking Area Code): LST CNOPERATORTA:;
2.3 Listar Versão de Software
3
Verificar status
3.1 Verificar status da célula DSP CELL:; Se a célula estiver ok (exemplo):
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 6 of 12
Guide to interconnect two APM30H with one IBBS200D
Se a célula estiver Nok (exemplo):
3.2 Verificar status do link para o CN
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 7 of 12
Guide to interconnect two APM30H with one IBBS200D
Como teste pode‐se tentar pingar o CN ou mesmo o M2000. Caso o e Node B já tenha configuração, pode‐se fazer DSP OMCH (para obter os IPs local/destino do OMC) ou DSP SCTPLNK (para obter os IPs local/destino do CN).
3.3 Verificar status do interface S1
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 8 of 12
Guide to interconnect two APM30H with one IBBS200D
3.4 Verificar status do link para o OMC (M2000)
4
Alterar status
4.1 Desactivar a célula DEA CELL:;
4.2 Activar a célula ACT CELL:;
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 9 of 12
Guide to interconnect two APM30H with one IBBS200D
5
Upgrade e Configuração
5.1 Activar o FTP server
Fazer download da FTP TOOL e instalar no computador. Deve aparecer o circulo verde no canto inferior direito do PC. Fazendo duplo click neste simbolo verde podemos alterar a working directory para a pasta onde está o software. Configurar o FTP do servidor FTP (computador usado). Password e user de FTP = admin O File path deve ser configurado para a pasta onde está o software.
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 10 of 12
Guide to interconnect two APM30H with one IBBS200D
5.2 Copiar software para o eNode B e activar a configuracão
Ou através de MML:
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 11 of 12
Guide to interconnect two APM30H with one IBBS200D
6
Alarms
Ethernet Link Fault – Significa que existe um problema físico na ligação do cabo UTP/Fibra ao ATN. O porto está down. Devem verificar a ligação física ou verificar se o porto do ATN está activo. BBU CPRI Interface Error – Significa que existe um problam na ligação entre a LBBP e o RRU. Verificar se o RRU está alimentado (energia) ou se a fibra entre a LBBP o RRU está devidamente ligada. Cell Unavailable – Significa que a célula não está ao serviço. Verificar o estado do SCTP link e do interface S1. Verificar se a ligação entre a LBBP e o RRU está OK. S1 Interface Fault – Significa que o interface S1 está inoperacional. Problema de transmissão ou no CN. Podem tentar pingar para verificar se está acessível.
Issue V4.1 (2012-03-21)
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd
Page 12 of 12