Upwork (ODesk) Test Answers - Mechanical Engineering Test 2015 - Miscellaneo

Upwork (oDesk) test answers - Mechanical Engineering Engineering Test 2015 - Miscellaneous Certifications Certifications

-Elance nce freelancers freelancers have a college degree NEXT DO YOU KNOW THAT? 77% of Upwork -Ela

Fenders Fender s - DCL USA Pneumatic Fenders, Yokohama Fenders Pneumatic Marine Fenders,

<< All Upwork (oDesk) and Elance Tests << Upwork (oDesk) test answers << Miscellaneous Certifications category Ads b y Goo gle

► Test Answers

► Quiz and Answers

► Exam Answers

► Quiz Test

(76 / 1) 1) Test answers for Mechanical Engineering Test 2015 (76

Last updated: June 16

Upwork (oDesk) • Miscellaneous Certifications

Questions and answers are regularly updated. Answered and not answered tests questions. ( cover letter examples , interview questions , profile samples This helps getting job: Hundreds of (cover

17 new!

) • Earn on Upwork (oDesk)

2 new!

Popular test answers: HTML HTML,, .Net .Net,, CSS CSS,, English English,, SEO SEO,, Photoshop Photoshop,, iOS iOS,, Java Java,, Android Android,, Ruby Ruby,, Python Python,, JavaScript See all 5 tests answers updated 14 Sep, 2015 Watch recent video tests answers (includes absent test answers) Find Upwork (oDesk) and Elance test answers on this website:

NEW! tests, articles, cover letters and job interviews Collapse | Collapse | Expand

76 Answered Test Test Question Question s: 1. Which among the following following is also known as croning process in which cast parts are produc produced ed with dimens dimensional ional tolerances tolerances as low as ±0.2 millimeters.

Ans wers :

Upwork (oDesk) test answers - Mechanical Engineering Test 2015 - Miscellaneous Certifications

• Shell casting

2. Calculate the moment of a 20 newtons force at 10 meters perpendicular distance from the point about which the moment is required.

Ans wers :

• 200 newton meters • 100 newton meters • 150 newton meters • 250 newton meters 3. Which of the following devices is used for atomizing and vaporizing the fuel before mixing it with air in varying proportions?

Ans wers :

• Spark plug • Carburetor • Flywheel • Governor 4. If Q is energy, W is external work done and E is internal energy then, According to the first law of thermodynamics, energy Q is equal to:

Ans wers :

•Q=W+E •Q=W–E •Q=W/E •Q=WxE 5. Which branch of engineering mechanics deals with the force which acts upon bodies at rest?

Ans wers :

• Statics • Dynamics


angular velocity is 10 radians per second and the radius of the circular path is 10 meters.

Ans wers :

• 30000 newtons • 10000 newtons • 20000 newtons • 15000 newtons 7. Which among the following is the correct range of value for the included angle of a V -belt?

Ans wers :

• 10º to 20º • 30º to 40º • 70º to 80º • 100º to 120º 8. Which among the following is a spring controlled governor?

Ans wers :

• Watt governor • Porter governor • Hartnell governor 9. Which among the following plant layout is known as 'functional layout' or 'analytical layout'?

Ans wers :

• Process layout • Product layout • Fixed position layout 10. Which among the following types of chips is usually produced during the machining of brittle materials?

Ans wers :

• Discontinuous chips • Continuous chips with no built up edges • Continuous chips with built up edges 11. According to the Boyle's law:


• temperature is directly proportional to volume. • temperature is inversely proportional to volume. 12. The compression ratio of a diesel engine is:

Ans wers :

• 10 to 15 • 15 to 25 • 40 to 50 • 50 to 60 13. Calculate the specific heat of a gas at constant volume, given that the mass of the gas is 100 kilograms, the initial temperature of the gas is 20 kelvins and the final temperature of the gas is 50 kelvins. The total heat supplied to the gas is 105 kilojoules.

Ans wers :

• 30 joules per kg per kelvin • 35 joules per kg per kelvin • 40 joules per kg per kelvin • 45 joules per kg per kelvin 14. The petrol engine works on ___________.

Ans wers :

• Rankine cycle • Otto cycle • Diesel cycle 15. In which, among the following systems, does no heat or work cross its boundary?

Ans wers :

• Closed system • Isolated system • Open system 16. A couple of two bodies produces which type of motion?

Ans wers :


17. Up to which point in a stress-strain curve is Hooke's law applicable?

Ans wers :

• Yield point • Elastic limit • Plastic limit • Breaking point 18. A solar collector receiving solar radiation at the rate of 0.6 kW/m2 transforms it into the internal energy of a fluid at an overall efficiency of 50%. The fluid heated to 350 K is used to run a heat engine which rejects heat at 313 K. If the heat engine is to deliver 2.5 kW power, the minimum area (in sq. meters) of the solar collector required would be:

Ans wers :

• 8.33 • 16.66 • 39.68 • 79.36 19. In which type of welding is a mixture of Iron oxide and Aluminum used?

Ans wers :

• Metal inert gas welding • Tungsten inert gas welding • Submerged arc welding • Thermit welding • Stud arc welding 20. The forces which meet at one point but whose lines of action lie on different points are known as ______________.

Ans wers :

• Co-planar concurrent forces • Co-planar non-concurrent forces • Non co-planar concurrent forces • Non co-planar non-concurrent forces 21. Calculate the value of crippling load of a specimen, given that the crushing stress is 160 newtons per square meter, cross sectional area is 80 square millimeters, Rankine's constant is 1, length of column is 1 millimeter and the value of radius of


• 8000 • 8500 22. How many revolutions of crankshaft does it take to complete one working cycle in a four stroke engine?

Ans wers :

•2 •4 •6 •8 23. Which type of thread is used in bench vices in manufacturing units?

Ans wers :

• Acme thread • Buttress thread • Knuckle thread • Square thread 24. Which type of sand is used on the face of the pattern before molding?

Ans wers :

• Parting sand • Core sand • Loam sand • Floor sand • Backing sand 25. In which, among the following governing methods, is a control valve fitted in the fuel delivery pipe in order to control the quantity of fuel mixed in the charge?

Ans wers :

• Hit and miss governing • Qualitative governing • Quantitative governing • Combination system of governing


• Straight piece work system • Halsey plan • Rowan plan • Gantt plan 27. In which, among the following engine strokes, is the firing of the vaporized fuel carried out?

Ans wers :

• suction stroke • expansion stroke • exhaust stroke • compression stroke 28. The process to improve the fatigue resistance in metals by producing compressive stresses in its surface is known as ________.

Ans wers :

• cold peening • cold bending • cold spinning • cold extrusion 29. Due to which of the following properties does molding sand adhere to the sides of the molding box?

Ans wers :

• Permeability • Plasticity • Adhesiveness • Cohesiveness 30. Calculate the number of joints in a chain if the number of links is 5.

Ans wers :

• 3.5 • 4.5 • 5.5 • 6.5


•9 • 110 • 90 • 0.1 32. What is the significance of the above given symbol in work study technique?

Ans wers :

• Inspection of materials • Transport of materials • Storage of materials • Operation of materials 33. In which, among the following scavenging methods, are the inlet and the outlet ports situated on the same side of the engine cylinder?

Ans wers :

• Loop scavenging method • Uniflow scavenging method • Crossflow scavenging method 34. The resultant of two forces A and B is Q. If A is doubled and the new resultant is perpendicular to A, then:

Ans wers :

• A=B • A=Q • A=2Q • B/2=Q 35. Calculate the mechanical efficiency of an engine whose brake power is 20 watts and indicated power is 40 watts.

Ans wers :

• 40% • 50% • 60% • 70%


• Riser • Core • Refractory 37. If the motion between a pair takes place in more than one direction, then this kind of motion is termed as ___________.

Ans wers :

• completely constrained motion • incompletely constrained motion • successfully constrained motion 38. The work measurement technique is concerned with:

Ans wers :

• the time during which maximum production is done. • the time during which no production is done. • the processes to simplify the production work. • the development of economical methods of carrying out production work. 39. What is the value of universal gas constant in SI units?

Ans wers :

• 8.314 joules per kilogram mole kelvin • 83.14 joules per kilogram mole kelvin • 831.4 joules per kilogram mole kelvin • 8314 joules per kilogram mole kelvin 40. A process in which gas is heated such that the product of its pressure and volume remains constant is known as _______.

Ans wers :

• isochoric process • isobaric process • isothermal process • hyperbolic process 41. Which type of welding is obtained if there is an excess of acetylene?

Ans wers :


42. In a simple harmonic motion, number of cycles produced per second is known as:

Ans wers :

• velocity. • acceleration. • frequency. • amplitude. • periodic time. 43. Calculate the frictional power of an engine if the indicated power is 10 watts and the brake power is 5 watts.

Ans wers :

• 5 watts • 2 watts • 0.5 watts • 15 watts 44. The allowance provided on patterns which are used for castings in which contraction is not uniform is known as _________.

Ans wers :

• shaking allowance • camber allowance • machining allowance • contraction allowance • draft allowance 45. If we have to choose a grinding wheel having the least hardness, which grade of grinding wheel should be chosen?

Ans wers :

• Grade A to H • Grade I to P • Grade Q to Z 46. Calculate the torque for a solid shaft having a radius of 10 millimeters and torsional shear stress of 112 newtons per square millimeter.

Ans wers :

• 175000 newton millimeters


47. _____________ is the operation of enlarging a previously drilled hole.

Ans wers :

• Reaming • Tapping • Boring • Lapping 48. Two springs having stiffness 5 and 10 respectively are connected in series. Calculate the combined stiffness of the two springs.

Ans wers :

• 20/3 • 30/4 • 10/3 • 15/2 49. What is the value of entropy of a substance at absolute zero temperature?

Ans wers :

•0 •1 •∞

• -1 50. If M - bending moment, I - moment of inertia, E - young's modulus of elasticity and R - radius of curvature then, which of the following is the correct bending equation for a beam?

Ans wers :

• M/I = R/E • I/M = R/E • M/I = E/R 51. The milling operation of producing surfaces of irregular shape is known as:

Ans wers :

• Plain milling


52. What effect does the grain size of a cutting tool have on the tool life?

Ans wers :

• Tool life increases • Tool life decreases • Grain size has no effect on tool life 53. Within which angular range is the shear stress maximum if a body is subjected to tensile stress in one plane?

Ans wers :

• 45º and 135º • 50º and 175º • 40º and 130º • 55º and 180º 54. _______________ is a beam having its end portion extended beyond the support.

Ans wers :

• Cantilever beam • Simply supported beam • Overhanging beam • Continuous beam 55. ___________ is that type of motion in which there is reduction in amplitude over every cycle of vibration.

Ans wers :

• Forced vibration • Damped vibration • Longitudinal vibration • Transverse vibration 56. Calculate the circular pitch of a gear whose pitch circle diameter is 12.74 millimeters and the number of teeths on gear wheel are 20.

Ans wers :

• 2 millimeters • 3 millimeters


Ans wers :

• optimistic time • most likely time • pessimistic time 58. Which type of organization among the following has a straight flow of authority within a single unit?

Ans wers :

• Line organization • Functional organization • Line and staff organization • Line, staff and functional organization 59. The smallest circle drawn to the cam profile is known as ________.

Ans wers :

• base circle • pitch circle • prime circle 60. Calculate the coefficient of friction of a body whose limiting friction of which is 10 newtons and the value of the normal reaction is 5.

Ans wers :

•2 • 50 • 0.5 • 15 61. Calculate the angular velocity of a body whose rotations per minute is 60.

Ans wers :

• 6 radians per second • 8 radians per second • 7.60 radians per second • 5.68 radians per second


• Completion of the project is not delayed. • Additional resources are required to complete the project in time. • Completion of the project is delayed. 63. __________ is the angle made by the face of the tool and the parallel plane to the base of the cutting tool.

Ans wers :

• Lip angle • Rake angle • Side relief angle • End relief angle 64. What type of gear is used to transmit power at constant velocity ratio between two shafts the axes of which intersect at an angle?

Ans wers :

• Helical gear • Bevel gear • Worm gear • Rack and pinion gear 65. Which technique among the following is known as 'time phase of loading'.

Ans wers :

• routing • scheduling • dispatching 66. The process of heating the metal to the plastic state followed by application of pressure to form the molten metal into desired shape is known as ________.

Ans wers :

• hot forging • hot piercing • hot drawing • hot extrusion 67. The radius of a shaft is 5 millimeters. The shear stress on that shaft is 50 newton

square millimeter and the polar


• 200 newton millimeters • 150 newton millimeters • 250 newton millimeters 68. If L is the length of the journal and d is the diameter of the journal then, in a square bearing:

Ans wers :

•L=d •L≠d

•L+d=1 •L=1+d 69. The bolt and nut is an example of a:

Ans wers :

• turning pair • rolling pair • screw pair • spherical pair 70. In involute gears the pressure angle __________ as the gear engages or disengages.

Ans wers :

• decreases • increases • remains constant 71. The broaching operation in which the workpiece moves across the stationary tool is known as _______.

Ans wers :

• surface broaching • continuous broaching • pull broaching • push broaching 72. Calculate the coefficient of friction of a body whose limiting friction is 10 newtons and the value of the normal reaction is 5.


• 0.5 • 15 73. The ability of a material to embed small particles of dust, grit etc. is known as ___________.

Ans wers :

• conformability • bondability • embeddability • compressibility 74. A jig is a device which is used to:

Ans wers :

• hold a workpiece. • hold and locate a workpiece. • hold and locate a workpiece as well as guide and control cutting tools. • hold a workpiece as well as guide and control cutting tools. 75. What is the value of the point angle of a twist drill?

Ans wers :

• 118º • 150º • 106º • 100º 76. Calculate the economic order quantity of a plant in which the total raw material utilized per year is 1600 tonnes, procurement cost per order is $1000 and the annual inventory carrying cost per item is $10.

Ans wers :

• 428.68 • 565.68 • 636.68 • 700.68

1 NOT Answered Yet Test Questio ns:


Ans wers :

• Low starting friction • Makes less noise at high speeds • Ability to withstand shock loads • Low maintenance cost

Recent:

- Benefits of being freelancer. Short 5 stories - I got first job with experience in Google Reports

- How I got my first

freelancing job

- How Indian student began work as a freelancer


- Getting your first project - Upwork(oDesk) For Beginners - Tips to complete Upwork(oDesk) profile

Related Tests An swers: Data Interpretation Test 2015 U.S. Cultur e and Etiquette Test 2015 Civil Engineering Test 2015 Manufacturing Design Test 2015 Business Writing Skills Certification 2015 Mechanical IQ Test 2015 Business Mathematics Test 2015 Data Sufficiency Test 2015 Photography Certificatio n 2015 Business Writ ing Skill s Test (U.S. Version) 2015 Structural Analysis Test 2015 Material Engineering Test 2015 Business Writing Skills Test (UK Version) 2015

odesk-tests.net since 2013. Thanks camaraderie for provided test answers. Share your test scores and answers by [email protected] Hindi | Bengali | Filipino | Urdu | Chinese Share with friends:

Upwork (ODesk) Test Answers - Mechanical Engineering Test 2015 - Miscellaneo

Recommend Documents