OPERATING INSTRUCTIONS
Two-Way Swivel Redress Kit
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Evolution Oil Tools Inc. and is provided to the customer for for information purposes only. It is requested that the document document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
Product Two-Way Swivel Redress Kit
228-20-OI-Rev-A
1
OPERATING INSTRUCTIONS
The Evolution Two-Way Tubing Swivel is Swivel is used with tubing rotators to allow the tubing to be rotated during production. The swivel is designed to allow torque anchors to be set. The Two-Way Swivel can also be set with no-turn tools The Evolution Two-Way Swivel can easily be serviced with our line of Redress Kits for reuse in the field. Our redress kits are specifically prepared for your Two-Way Swivel model. When properly redressed, a single swivel can last the life of the well, and beyond. Advantages
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
Robust, reliable design Specifically hardened anchor blocks provide maximum grip in torque anchor applications Straightforward to redress the Two-Way Swivel Tool
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
2
OPERATING INSTRUCTIONS Two-Way Swivel Exploded View
NOTE - The illustration above is intended as a guide only.
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
3
OPERATING INSTRUCTIONS
Installation Procedure 1
2
Remove the O-Ring and
Polypaks from inside the tool.
With the Housing in a
vise, such as the Evolution the Evolution Open Sided Pipe Vise, remove Set Screws and any remaining Shear Screws and slide out the Bottom Sub and
3
Top Sub.
Prepare all the parts
(Top Sub, Housing, and Bottom Sub) for assembly. Check all threads and housing for dirt or foreign material and use compressed air to remove any debris.
Note
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
Use caution when using compressed air, and follow all manufacturer instructions.
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
4
OPERATING INSTRUCTIONS
4
Lubricate (with Metalon
6
Install new Polypaks on
Hi-Tech 1.5 EP) both gaps for
the Bottom Sub. See Polypak
the Polypaks and install the
Orientation Detail on page 8).
Polypakson the Bottom Sub with the lip orientated to the Top Sub.
7
Place the Housing in a
vice. Lubricate the inside threads of the Housing with Metalon Hi-Tech 1.5EP.
5
Then install the Bearing
Ring right under the Polypak grooves.
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
5
OPERATING INSTRUCTIONS
8
Push the Bottom Sub all
the way in.
10
Thread the Top
Sub with a pipe wrench on the Housing and file off any pipe wrench bites.
9
Lubricate the outside
threads and the gaps for the O-Rings on the Top Sub and
11
install the O-Rings.
the Bottom Sub with the
Align the slots on
threaded holes for the Shear Screws on the Housing using a belt wrench.
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
6
OPERATING INSTRUCTIONS
12
Thread the four (4)
13
Thread the Shear
Set Screws using Loctite 242
Screws using Loctite 242
Removable and torque to at
Removable until tight then
least 30 Ft. Lbs. (40.6 Nm).
back-off 1/2 turn.
Note
Check to make sure both Shear Screws are in the slots on the Bottom Sub prior to use.
For operating instruction for the Two-Way Swivel, please refer to 228-10-OI 228-10-OI..
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
7
OPERATING INSTRUCTIONS
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
8
OPERATING INSTRUCTIONS
Brass Shear Redress Kit
Set Screws
Screws
O-Rings
Polypak I
Poypak II
Item Number
4
2
2
2
1
102510
4
2
2
2
1
102511
Redress Kit Tubing Swivel Two-Way 2 7/8 Redress Kit Tubing Swivel Two-Way 3 1/2
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
9
OPERATING INSTRUCTIONS If you have any other questions or concerns, do not hesitate to contact us:
www.eotools.com
Canada th
#3, 1820 – 30 Avenue NE Calgary, Alberta, Canada T2E 7M5 Toll Free: 1-800-265-TOOL (8665) Main: (403) 243-1442 Fax: (403) 258-2614
6415A – 63 St. Close Lloydminster, Alberta Tel: 780-875-1570 Cell: 780-522-8294 Cell: 780-870-1126
4512 – 81 Ave Edmonton, Alberta Tel: 587-758-9091 Cell: 780-919-1722 Cell: 780-893-1019
US P.O. Box 5363 2908 Coffey Street Victoria, Texas 77903 Main: (361) 575-7900 Fax: (361) 575-8081
Product - Two-Way Swivel Redress Kit
228-20-OI-Rev-A
3400 Kermit Hwy Odessa, Texas 79764 Tel: 432-337-7900 Fax: 432-337-7901 Cell: 432-638-7902
This document is intended to provide operating instructions for the Two-Way Swivel Redress Kit line of Evolution Oil Tool products. products. This guide is property of Evolution Oil Tools Inc. and is provided to the customer for information purposes only. It is requested that the document not be reproduced in any way, in whole or in part, or distributed without the express written consent of Evolution Oil Tools Inc. The document is uncontrolled uncontrolled if printed.
10
