Please note that there are two types of thermosyphon reboiler. You have studied a vertical ther Advantages of the horizontal type compared with the vertical include: the length of the tubes is not connected with the hydraulic balance. This allows the designer m The length of the shell does not affect the height of the attached column or the elevation of the two feed lines and vapour return lines can be used liuid heating medium such as hot oil is better suited to the tube side, giving a better film coeffi turndown is better because the height of the vapour and liuid legs are !roughly" independent # agree with you that the vapourisation ratio should be about $%& on a 'A(( )*+ basis. # b
Objective= In thermosyphon reboiler, it is important to determine to inlet nozzle elevation of reboiler This spreadshit will help to determine the same !ser have to chan"e h# which is related to inlet nozzle elevation of reboiler to "et desired result that is $ Thermosyphen will have desired flow$ It "ives what should be reboiler return nozzle to the column It also provides reboiler hei"ht re%uired This input is useful for the reboiler desi"n el isch"
0.112
)ar/100m
*ine *ength"
5.000
m
elich"
0.011
)ar
35.000
113.045
& apor ensit"
1.500 m
100.#5-
kg/m3
/ertical Thermos yphen
3.550
h2 h1 %.000
4.-50
#.500
elRe)"
0.034
)ar
ensit"
411.000
kg/m3
lope"
,36.4#%
!(g ensit"
255.-2-
kg/m3
C"
411.000
m
0.150 )ar/100m %.000
m 0.011 )ar 0.260 m 2en!(gg 21340.6%%
el !(ail"
0.06- )ar
el stem"
0.056 )ar
1en*g 2#223.3%0
Thermosyphon will have desi"n flow
255.-2-
osyphon, with boiling in the tube side. There is also the horizontal thermosyphon, with boiling in the s
re flexibility, to use a longer tube bundle and get more area within a given shell diameter. reboiler relative to the column
ient f the amount of vaporisation. lieve that the hydraulic balance can be modelled with both -T# and -T)( design programs.
ell side, which in my view is a much better choice than the vertical.