Automatic temperature controlled fan allow you to experience total freedom by eliminating manual operations for cooling a system during a process. The temperature of all types of machines us…Descripción completa
temperature control device
Full description
Fouling mitigation in preheat trains through scheduled cleaning and desalter temperature control.
Fouling mitigation in preheat trains through scheduled cleaning and desalter temperature control.Description complète
electrical
ENGINE GOVERNING SYSTEMS ESD5500E SERIES SPEED CONTROL UNIT MEMBER GOVERNORS AMERICA CORP. • 720 Silver Street • Agawam, MA 01001-2907, USA ESD5500E SERIES SPEED CONTROL UNIT INTRODUCTION The ...
Automatic Fan Speed Controller without Microcontroller. This product not works in basis of temperature instead of that it works with time.
Full description
Chopper Based Speed Control of Dc Motor
In this paper, PC based DC motor speed control using PID proportional, Integral, derivative control algorithm for laboratory. Arduino Uno microcontroller and L298N hybrid motor driver module are used to drive the dc motor. PID algorithm is uploaded t
Increase in temperature may also lead to an increase in the number of ions in solution due to the dissociation of molecules. As pH is a measure of the hydrogen ion concentration, a change in the temperature of a solution will be reflected by a subseq
WC
Automation based project.
Automation based project.Full description
Automation based project.
motorDescripción completa
ABSTRACT
This project is a standalone Temperature based fan speed controller that controls the speed of the fan according to our requirement. Use of embedded technology makes this closed loop feedback control system efficient and reliable. Micro controller (AT89C51) allows dynamic and faster control. Liquid crystal display (LCD) makes the system user-friendly. It is very compact using few components and can be implemented for several applications including air-conditioners, water-heaters, snow-melters, ovens, heat-exchangers, mixers, furnaces, incubators, thermal baths and veterinary operating tables. AT89C51 micro controller is the heart of the circuit as it controls all the functions. The temperature sensor LM35 senses the temperature and converts it into an electrical (analog) signal, which is applied to the micro controller through ADC. The analog signal is converted into digital format by the analog-to-digital converter (ADC). The sensed and set values of the temperature are displayed on the 16x2-line LCD. The micro controller drives control relays by means of ULN driver circuit to control the motor speed with the help of high wattage tagged wire wound resistor. Single pole double throw (SPDT) relays are connected to the micro controller through a ULN driver circuit. The relays require 12 volts at a current of around 50 mA, which cannot be provided by the micro controller. So the ULN driver circuit is added. The relays are used to operate the electrical fan or for operating any other electrical device. Normally the relays remain off. As soon as pin of the micro controller goes high, the relays operate. This project uses regulated 5V, 500mA & 12V, 500mA power supply. 7805 and 7812 three terminal voltage regulators are used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down transformer. This project is useful in process industries for maintenance and controlling of Boilers temperature.
Block Diagram: Embedded Temperature Based Fan Speed Controller using 89C51 Microcontroller
