Owners Manual for craftsman model 113.298750 10 inch table sawFull description
Descripción completa
Scroll saw, catalog
Descripción: WPS FOR SAW
Scroll saw, catalog
Descripción: Scroll saw, catalog
Descripción completa
Bagaimana contoh Rosulullaoh dalam berbisnisFull description
EpidDeskripsi lengkap
KP Table
breve introduccion a como las tabals de nuestra base de datos son almacenadas en oracleDescripción completa
pbgFull description
Table Saw A table saw is a woodworking tool consisting of a circular saw blade, driven by an electric motor and mounted under a table. The blade protrudes through the surface of the table, which provides support for the material being cut.
How to Use: guides wood that you feed through the saw.
1.Be sure you are wearing the proper safety gear and taking the proper safety precautions. Be sure the blade and fence are at the appropriate (the part that you settings. slide the wood against when you feed it onto the saw)
2.Start the saw and let it reach maximum RPM before beginning the cut. 3.Stand to the side in case the wood is kicked back, and be sure the wood is supported on the other side. 4.Have a push stick close at all times to keep your hands away from the blade. 5.Keep the wood firmly against the guide fence as you make the cut.
lifts blade into and out of table
locks blade into place
adjust the tilt of the blade in order to cut angles.
6.Wait for the blade to come to a full stop before removing it from the wood, if you are not cutting all the way through the length of the wood.
Safety requirements: 2.Make sure the blade and fence are square.
3.Avoid wearing jewelry or baggy clothing.
4.Wear Ear and eye protection
5.Look for knots and nails or staples in the wood before you begin.
6.Keep a sensibly low blade height.
7.After each use, lower the blade into the table
7.After each use,make sure your work area is clean