Project: Calculated by: Date:
System Head Requirement Calculation Input Values Automatically Calculated Values Type of Liquid being Pumped Flow Rate Specific Gravity of liquid being pumped Liquid Temperature
Baker Oil Tools BAK ER SP D
GPM (Refer to Table 3 for Properties of Water) F
Suction Pipe Size (Ds)
in
Height of liquid Above (+) or Below (-) the Pump Inlet centerline (Hs)
ft
Total Length of Suction Line (Ls)
ft ft
Suction Head Loss
(Refer to Table 4 for Head Loss)
Straight Pipe Length equivalence of Suction Fittings Qty. Elbow Tee Swing Check Globe Valve Gate Valve Butterfly Valve
x x x x x x
Total Length of Suction Pipe (TLs) = Ls + ELs
0.0 ft
Suction Friction Loss Head (FLs) = (TLs X Head Loss) /100 =
0.0 ft
Equivalent Straight Length of Pipe Sum of Equivalent Length of per Fitting (ft) (Ref. Table 2) Straight Suction Pipe (ft) 0 0 0 0 0 0 Total Suction Equivalent Length (ELs) = 0
Discharge Pipe Size (Dd)
in
Maximum Height above the pump centerline that the liquid rises to, on the discharge side of the system (Hd)
ft
Total Length of Discharge Line (Ld) Discharge Head Loss
ft ft
(Refer to Table 4 for Head Loss)
Straight Pipe Length equivalence of Discharge Fittings Qty. Elbow Tee Swing Check Globe Valve Gate Valve Butterfly Valve
x x x x x x
Total Length of Discharge Pipe (TLd) = Ld + ELd
0 ft
Discharge Friction Loss Head (FLd) = (TLd X Head Loss) /100 =
Required Pressure at Discharge (Prq)
0.0 ft
#DIV/0! ft
Total Friction Head (Hf) = FLd + FLs
0.0 ft
Total Elevation Head (He) = Hs + Hd
0.0 ft
SPD 232 10/28/03
(Refer to Table 4 for Head Loss)
psi
Head Required at Discharge (Hrq) = (Pd x 2.31) / Sp. Gr.
Total Head Required (Hr) = Hf + He + Hd
Equivalent Straight Length of Pipe Sum of Equivalent Length of per Fitting (ft) (Ref Table 2) Straight Discharge Pipe (ft) 0 0 0 0 0 0 Total Discharge Equivalent Length (ELd) = 0
#DIV/0! ft
4302 Profit, San Antonio, Texas 78219 Watts: (800) 688-5650 Phone: (210) 304-5650 Fax: (210) 304-5641
[email protected]
TABLE 2
PIPE FITTINGS E SIZE OF FI 90' Elbow 45' Elbow Long sweep elbow Close return bend
TABLE 3
TABLE 4
FRICTION OF W 2" GPM 30 40 50 60 70 80
V 3.06 4.08 5.11 6.13 7.15 8.17
Pip F
1 1 2
