Renault Immo Emulator (1)

Renault Immo Emulator After decoding ECU with our Renault Immo Killer (another name is ECU Decoding tool) or by entering security code some models can not work without immobiliser code stored in their memory: Diesel: EDC15C3, DCU3R and MSA15 MSA15 Gasoline: SIRIUS32 (except these for 1.4l engine) and FENIX5 2.0L 16V. Renault Immo Emulator can be used only on cars produced in 1996-2001 (the same years as Renault Immo Killer works) In these cases you might wish to use our Renault Immobiliser Emulator. The connection is easy: after you decoded ECU with Renault Immo Killer, cut original immobiliser data line (ß   this step is important) of automobile and connect this small board (even fit in ECU box) according to the table and picture:

- immo line (to ECU) - GND - 12V (after ignition)

System Siemens Sirius 32 Siemens FENIX5 Bosch EDC15C3 Bosch MSA15.5 Lucas DCU3R

Immo 58 37 (1.4l, 1.6l); 35 – others. Con.A – pin G2 59 20

CND 28 2

+12V 29 24

Con.B – pin L3 1 78

Con.B – pin M2 23 77

www.diag-by.com