Module 1 – Cluster Preparation Objectives After this module the delegate shall be able to:-
• Understand the importance of cluster preparation in: • Cluster planning • Cluster health checks based on RNW measurements • Neighbour list verification and parameter audit
Module 2 – RF Optimisation and Neighbour Planning Objectives After this module the delegate shall be able to perform:• RF Verification and Optimisation actions • Understand how new Sites should be integrated to the network • Neighbour Plan Verification
Module 3 – Signalling Flows Objectives After this module the delegate shall be able to:• Describe the signalling flows for AMR calls, PS calls, HSDPA calls, ISHO, SHO and SRNC relocation procedures • Understand the key pieces of information contained in the messages • Understand the protocols and transport mechanisms used for the various messages
Module 4 – Drive Test Analysis Objectives After this module the delegate shall be able to:• Understand the different elements required for an effective drive test program • Understand how all aspects of drive data can be used to obtain a • Differentiate between genuine (RF) and non-genuine (system) failures • Understand the KPIs that can be obtained
Module 6 – Parameter Optimisation Objectives After this module the delegate shall be able to:• List some of the parameters that can be tuned for improved performance
improvement areas • Understand how new RAS05 & RAS51 PS features effect for the throughput, file download time & PS Call setup success