Guide to Method Statements for the Installation of Storage Equipment
Mezzanine
Guide to the Specification of Mezzanine Floors
NA
Guideline No 1 - Guide to the Building Regulations
Racking
Guideline No 2 - Guide to Erection Tolerances for Static Racking
Walkway
Guideline No 3 - Guide to Industrial Suspended Floors Using Chipboards
RSW
Guideline No 4 - Guide to the Specification of Freestanding High Bay Racking and Clad Racks
Mobile Shelving
Guideline No 5 - Guide to the Design and Installation of Mobile Shelving
Racking / Shelving
Guideline No 6 - Guide to the Conduct of Pallet Racking and Shelving Surveys Calculation principles of storage and retrieval machines Tolerances, deformations and clearances in the high-bay warehouse
Code of practice for the deisgn of static pallet racking - Including design example
Racking / Shelving
FEM 10.2.03
Guidelines for the safe provision of static steel racking & shelving - Specifier's guidelines
Shelving
FEM 10.2.04
Guidelines for safe use of static steel racking and shelving, Users guide
FEM 10.2.06
The design of hand loaded static steel shelving systems - Shelving design code
Drive In
FEM 10.2.07
The design of 'Drive In and Drive through' Pallet racking - Drive In design code
Seismic - Racking/Shelving
FEM 10.2.08
Recommendations for the design of static steel pallet racks under seismic conditions Design example M1 - Unbraced rack in low seismic zone
Seismic - Racking/Shelving
FEM 10.2.08
Recommendations for the design of static steel pallet racks under seismic conditions - Design example M2 - Braced rack in high seismic zone
Seismic - Racking/Shelving
FEM 10.2.08
Recommendations for the design of static steel pallet racks under seismic conditions
FEM 10.3.01
Adjustable Beam Pallet Racking - Tolerances, Deformations and Clearances
Shelving
FEM
Racking / Shelving
RMI - 1997
Specification for the design testing & utilization of industrial steel storage racks
Racking / Shelving
RMI - 2002
Specification for the design testing & utilization of industrial steel storage racks
RMI - 2008 (MHI 16.1:2008)
Specification for the design testing & utilization of industrial steel storage racks
RMI - 2008 (MHI 16.1:2008)
Commentary to MH16.1 -2008:Specification for the design,testing and utilization of industrial steel storage racks
Racking / Shelving RMI - MHI Racking / Shelving
Product
STANDARD NAME
SECTION
Walkway
MHI 26.2:2007
General Deisgn code
ANSI/ASCE-8-90
Seismic - Racking/Shelving
FEMA
FEMA 460
STANDARDS Design Testing and utilisation of welded-wire rack decking Specification for the design of Cold-formed stainless steel structural members Seismic considerations for steel storage racks located in areas accessible to the public
Racking / Shelving
BS EN 15095 : 2007
Power operated mobile racking and shelving, carousels and storage lifts – safety Equipment
NA
BS EN 15629:2008
Steel static storage systems - specification of storage equipment
Racking
BS EN 15635:2008
Steel static storage systems - Application & maintenance of storage equipments
BS EN 15512:2009
Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
Racking / Shelving
CEN
SPR / APR
BS EN 15620 - 2008
Steel static storage systems - Adjustable pallet racking - Tolerances,deformations and clearances
SPR / APR
EN 15878
Steel static storage systems – adjustable pallet racking systems – terms and definitions (available end of 2010)
NA
EN 15629
Steel static storage systems – specification of storage equpment equipment
(Australian) AS
Indian Standard (IS)
AS 4084- 2005
Steel storage racking
IS 800
Code of practice for general construction in steel
IS 800
Code of practice for general construction in steel
IS 801
Code of Practice for Use of Cold-Formed Light- Gauge Steel Structural Members in General Building Construction
IS 1893 Part (I) IS 1893 Part (IV)
British Standard (BS)
American Standard
European Standard (EN)
IS 8081
Specification for slotted angles
BS 5950 - Part 1
The design, fabrication and erection of structural steelwork
BS 5950 - Part 5 BS 4345
Specification for slotted angles
BS 826
Steel single tier bolted shelving (angle upright type)
LRFD
Load and Resistance Factor Design Specification for structural steel building Specification for the Design of Cold formed steel structural members
AISI Spec. Cold Formed steel Design Manual ASCE Spec.
Specification for structural steel building, Allowable stress Design and Plastic Design
ENV 1993-1-1
General rules for buildings
ENV 1993-1-3
Cold formed steel sheeting and members
ENV 1998 Australin Standard (AS)
AS/NZS 4600
Australian standard for Cold-formed Steel Structures
AS 4100
Australian standard for Steel Structures
CEN
BS EN 10025-2:2004
Bangladesh
BNBC
Indonesian national std
SNI 03-1726-2002
Hot rolled products of structural steels - Part 2 :Technical delivery conditions for non-alloy structural steels Bangladesh National building code Design of eathquake resistance for buildings
