This paper focuses on the maximizing the solar energy produced by Solar cells through the development of such a Sun-Tracking system that can be implemented using PLC and SCADA. The developed…Full description
This paper focuses on the maximizing the solar energy produced by Solar cells through the development of such a Sun Tracking system that can be implemented using PLC and SCADA. The developed tracking system is innovative in relation to the usual sun
GSM-RNO
Antenna array optimization using cst toll box and matlab and also comparision of different methods
Utilization of hydro-power as renewable energy source is of prime importance in the world now. Hydro- power energy is available in abundant in form of falls, canals rivers, dams etc. It mean…Full description
This is a continuation of my uploads of any Autodesk Inventor tutorial file that I lay my hands on. Most of these files are from Autodesk skill builder site. Datasets are meant to be downloaded...
This is a continuation of my uploads of any Autodesk Inventor tutorial file that I lay my hands on. Most of these files are from Autodesk skill builder site. Datasets are meant to be dow…Descrição completa
Drawing Production using PDMS Draft
Using Hydroponics for Food Production
Descripción: In this document , it explains how bolt connection can be defined and explains also how to include preload while creating Bolt and nut joint
In this document , it explains how bolt connection can be defined and explains also how to include preload while creating Bolt and nut joint
Pushover Analysis of Multi Storey Building Using EtabsFull description
actix for 3G analysis
This paper presents Reinforced Concrete RC slab design optimization technique for finding the best design parameters that satisfy the project requirements both in terms of strength and serviceability criteria while keeping the overall construction co
Pushover Analysis of Multi Storey Building Using Etabs
