PRICE LIST 50/2017
PEDROLLO S.p.A. Via Enrico Fermi 7 37047 San Bonifac Bonifacio io (Verona) ITAL ITALY Y paid-up capital € 60,000,000. 60,000,000.00 00
tel. +39 045 6136311 fax +39 045 7614663
[email protected] www.pedrollo.com Follow us on: www.pedrollo4people.com Facebook PedrolloCorporate Pedrollo4People
YouTube
Vimeo
Linkedin
STANDARD VERSIONS VOLTAGES Single-phase: 230 V – 50 Hz with built-in thermal overload protector. Three-phase up to 4 kW and 4 poles three-phase: 230/400 V – 50 Hz. Three-phase from 5.5 kW: 400/690 V – 50 Hz.
PERFORMANCE AND ENERGY EFFICIENCY
Pumps fitted with the Three-phase option are equipped with high efficiency motors Power
Class of efficiency
P�
(IEC 60034-30)
Up to 0.60 kW
IE2
From 0.75 to 75 kW
IE3
The electric water pumps which comply with EU rule N. 547/2012 have a minimum efficiency index of MEI≥0.40
SPECIAL VERSIONS
Pumps with other options voltages or 60 Hz frequency. Pumps with special mechanical seals suitable for use with other liquids. Surface pumps with IP X5 grade protection. Submersible pumps without float switch.
SPECIAL WINDINGS ON REQUEST
110 V - 50 Hz 240 V - 50 Hz 110 V - 60 Hz 220 V - 60 Hz 110/220 V - 60 Hz 240/415 V - 50 Hz 220/380 V - 60 Hz
(Single-phase) (Single-phase) (Single-phase) (Single-phase) (Single-phase) (Three-phase) (Three-phase)
CERTIFICATION AND TRADEMARKS
3
Price List 50
CONTENTS PERIPHERAL PUMPS PK
VERTICAL MULTI-STAGE PUMPS 6 MK
PKS
SUBMERSIBLE MULTI-STAGE PUMPS
12
UP
22
NK
23
6
PQ
4” SUBMERSIBLE PERIPHERAL PUMP
6-7 PQ-Bs SELF-PRIMING PUMPS PV
7
CK
13
CKR PQA
7
JSW JSW JDW
14
JCR
15 14
CENTRIFUGAL PUMPS CP
8
DAVIS
24
4” MONOBLOCK SUBMERSIBLE PUMPS
4BLOCK CP-ST CP-ST AL-RED
9
HF
9
24
15
PLURIJET
4” SUBMERSIBLE SOLAR PUMPS STANDARDIZED CENTRIFUGAL PUMPS
NGA 10 NGA-PRO
MULTI-STAGE PUMPS
2CP
F
16-17
F4
18-19
FLUID SOLAR
25
10 4” SUBMERSIBLE PUMPS F-I
2-4CP
17
11
2-5CR
11
3-6CR
11
STANDARDIZED CENTRIFUGAL PUMPS
FG
4SR
26-31
20-21
4
Price List 50
CONTENTS 6” SUBMERSIBLE PUMPS
6SR
SUBMERSIBLE PUMPS
PLUG & DRAIN
D
46
ZX
46
53
32-35 SAR
54-57 VX
4” - 6” MOTORS
47 BC
4PD
36
4PS
37
6PD
37
HYDROFRESH VXC 48 MC
58
SUBMERSIBLE MULTI-STAGE PUMPS TOP MULTI
38
TOP MULTI-EVO
38
TOP MULTI-TECH
39
TOP MULTI-EVOTECH
39
DC
49 COMBIPRESS “CB2”
SUBMERSIBLE PUMPS TRITUS TOP
49
40-41
VXC RX
59
42-43
50
EASYPUMP-EP
MC 60
VX-ST 44 BC-ST
51 MC-F PMC
Electronic pressure regulators EASYPRESS EASYSMALL EASYPRO
VX-MF 45 BC-MF
VXC-F PVXC
VX 40 BC 35
61
52 ACCESSORIES 62-77 5
Price List 50
PERIPHERAL PUMPS
PK
Pumps with peripheral impeller MODEL
Single-phase PKm 60® PKm 60®-MD PKm 65 PKm 70 PKm 80 PKm 90 PKm 100 PKm 200 –
PRICE € suct. deliv. Single-ph. Three-ph. Three-phase 0.37 0.50 5 ÷ 40 38 ÷ 5 PK 60® 82.00 97.00 PK 60®-MD 0.37 0.50 IE2 5 ÷ 55 21 ÷ 3 84.00 99.00 0.55 0.75 5 ÷ 50 50 ÷ 8 1" 1" PK 65 98.00 120.00 0.60 0.85 5 ÷ 50 62 ÷ 18 PK 70 154.00 169.00 0.75 1 5 ÷ 50 66 ÷ 22 PK 80 159.00 174.00 0.75 1 5 ÷ 40 82 ÷ 5 ¾" ¾" PK 90 195.00 210.00 IE3 1.1 1.5 5 ÷ 70 80 ÷ 15 PK 100 275.00 285.00 1.5 2 5 ÷ 80 86 ÷ 10 1" 1" PK 200 298.00 298.00 2.2 3 5 ÷ 90 95 ÷ 10 PK 300 – 324.00 POWER PERFORMANCE P� Q H kW HP l/min metres
Pump body: cast iron Impeller: brass Three phase motor efficiency class (IEC 60034-30) Motor bracket: patented n. IT1243605 Shaft: patented n. 0000275945 (PK60, PK65) Pump body: patented n. 0000275946 (PK60, PK65) Registered EU Design n. 01894478 Registered trade mark n. 009875394
PKS
Single-phase PKSm 60 PKSm 65 PKSm 70 PKSm 80
Three-phase PKS 60 PKS 65 PKS 70 PKS 80
POWER PERFORMANCE P� Q H kW HP l/min metres 0.37 0.50 5 ÷ 40 IE2 0.55 0.75 5 ÷ 50 0.60 0.85 5 ÷ 50 IE3 0.75 1 5 ÷ 50
PORTS
PRICE € suct. deliv. Single-ph. Three-ph. 38 ÷ 5 93.00 108.00 50 ÷ 8 140.00 155.00 1" 1" 62 ÷ 18 175.00 190.00 66 ÷ 22 180.00 195.00
Pump body: cast iron Impeller: brass Three phase motor efficiency class (IEC 60034-30) Check valve: built in Motor bracket: patented n. IT1243605 Shaft: patented n. 0000275945 (PKS60, PKS65)
PQ
Suitable for domestic applications
Self-priming pumps with peripheral impeller MODEL
PORTS
Suitable for domestic applications
Pumps with peripheral impeller MODEL
Single-phase PQm 60® PQm 65 PQm 70 PQm 80 PQm 90 PQm 100 PQm 200 – PQm 81
PRICE € suct. deliv. Single-ph. Three-ph. Three-phase 0.37 0.50 5 ÷ 40 38 ÷ 5 PQ 60® 82.00 97.00 IE2 0.55 0.75 5 ÷ 50 50 ÷ 8 PQ 65 112.00 127.00 1" 1" 0.60 0.85 5 ÷ 50 62 ÷ 18 PQ 70 176.00 191.00 0.75 1 5 ÷ 50 66 ÷ 22 PQ 80 181.00 196.00 0.75 1 5 ÷ 40 82 ÷ 5 ¾" ¾" PQ 90 195.00 210.00 IE3 1.1 1.5 5 ÷ 70 80 ÷ 15 PQ 100 275.00 285.00 1.5 2 5 ÷ 80 86 ÷ 10 1" 1" PQ 200 298.00 298.00 2.2 3 5 ÷ 90 95 ÷ 10 PQ 300 – 324.00 POWER PERFORMANCE P� Q H kW HP l/min metres
PQ 81
0.45 0.60 IE2 2 ÷ 18 80 ÷ 10
PORTS
½"
½"
170.00
185.00
Pump body: cast iron Impeller: brass Three phase motor efficiency class (IEC 60034-30) Motor bracket: patented n. IT1243605 Shaft: patented n. 0000275945 (PQ60, PQ65) Registered EU Design n. 002146548 PQ Registered trade mark n. 0001520591
6
Price List 50
PERIPHERAL PUMPS
PQ
Pump with peripheral impeller MODEL
POWER PERFORMANCE P� Q H kW HP l/min metres
Three-phase PQ 3000
2.2
Single-phase PQm 60-Bs PQm 65-Bs PQm 81-Bs
deliv.
¾"
¾"
POWER PERFORMANCE P� Q H kW HP l/min metres
Suitable for industrial applications
PORTS
PRICE € suct. deliv. Single-ph. Three-ph. Three-phase 0.37 0.50 5 ÷ 40 38 ÷ 5 PQ 60-Bs 160.00 175.00 1" 1" 0.55 0.75 IE2 5 ÷ 50 50 ÷ 8 PQ 65-Bs 211.00 226.00 0.45 0.60 2 ÷ 18 80 ÷ 10 ½" ½" PQ 81-Bs 206.00 221.00
Pump body: brass Impeller: brass Three phase motor efficiency class (IEC 60034-30) Shaft: patented n. 0000275945 (PQ60-BS, PQ65-Bs)
PV
suct.
PRICE € Three-phase 580.00
Peripheral pumps with brass pump body
MODEL
IE3 5 ÷ 50 180 ÷ 50
Pump body: AISI 316 stainless steel Impeller: bronze Three phase motor efficiency class (IEC 60034-30) Protection: IP X5 Registered EU Design n. 002714469
PQ-Bs
3
PORTS
Suitable for industrial applications
Peripheral pumps with brass pump body MODEL
Single-phase PVm 55 PVm 60 PVm 81 PVm 65 PVm 70 PVm 90
Three-phase PV 55 PV 60 PV 81 PV 65 PV 70 PV 90
PRICE € suct. deliv. Single-ph. Three-ph. 35 ÷ 5* ¼” ¼” 148.00 163.00 41 ÷ 5 176.00 189.00 ½" ½" 78 ÷ 5 195.00 210.00 55 ÷ 5 195.00 210.00 70 ÷ 5 ¾" ¾" 225.00 240.00 95 ÷ 5 235.00 250.00
POWER PERFORMANCE P� Q H kW HP l/min metres 0.18 0.25 0.37 0.50 0.45 0.60
2 ÷ 10 IE2
0.60 0.85 0.90 1.20 0.90 1.20
2 ÷ 32 2 ÷ 18 2 ÷ 42
IE3
2 ÷ 45 2 ÷ 35
* The PVm55 and PV55 pumps are design ed to work also at 60 Hz with H=46÷10 metres Pump body: brass Impeller: brass Three phase motor efficiency class (IEC 60034-30) Shaft: patented n. 0000275945 (PV55)
PORTS
Suitable for industrial applications
PQA
Pumps with peripheral impeller MODEL
Single-phase PQAm 60 PQAm 70 PQAm 72
PRICE € suct. deliv. Single-ph. Three-ph. Three-phase 0.37 0.50 2 ÷ 32 38 ÷ 5 PQA 60 130.00 145.00 ½" ½" PQA 70 205.00 220.00 0.55 0.75 IE2 2 ÷ 45 62 ÷ 8 5 ÷ 50 62 ÷ 12 1" 1" PQA 72 210.00 225.00 0.55 0.75 POWER PERFORMANCE P� Q H kW HP l/min metres
Pump body: RYTON Impeller: brass Three phase motor efficiency class (IEC 60034-30) Front pump body cover: brass Motor bracket: patented n. IT1243605 Shaft: patented n. 0000275945 (PQA60)
7
PORTS
Suitable for industrial applications
Price List 50
CENTRIFUGAL PUMPS
CP
Centrifugal pumps MODEL
POWER P� kW HP
PERFORMANCE Q H l/min metres
Single-ph.
Three-ph.
CPm 100
CP 100
0.25 0.33
10 ÷ 60
15 ÷ 7
117.00
132.00
CPm 130
CP 130
0.37 0.50 IE2
10 ÷ 80
22 ÷ 14
120.00
135.00
CPm 132
CP 132
136.00
151.00
CPm 150
CP 150
0.75
1
CPm 158®
CP 158®
0.75
1
CPm 170
CP 170
1.1
1.5
CPm 170 M
CP 170 M
1.1
1.5
CPm 190
CP 190
1.5
2
1 0.55 0.75
1
20 ÷ 120 22.5 ÷ 12 IE3
IE3
20 ÷ 120
29 ÷ 15
164.00
179.00
10 ÷ 90
34 ÷ 25
164.00
179.00
30 ÷ 120
38 ÷ 22
284.00
294.00
30 ÷ 160
35 ÷ 19
290.00
300.00
30 ÷ 140
46 ÷ 26
328.00
328.00
1"
3
30 ÷ 150
55 ÷ 36
–
347.00
CPm 160C
CP 160C
1.1
1.5
50 ÷ 200
31 ÷ 20
296.00
306.00
CPm 160B
CP 160B
1.5
2
50 ÷ 220
36 ÷ 23
324.00
324.00
–
CP 160A
2.2
3
50 ÷ 240
42 ÷ 26
–
343.00
CPm 210C
CP 210C
2.2
3
592.00
532.00
–
CP 210B
3
4
50 ÷ 270
53 ÷ 34
–
550.00
–
CP 210A
4
5.5
50 ÷ 280
61 ÷ 40
–
592.00
CPm 220C
CP 220 C
2.2
3
50 ÷ 450 31.5 ÷ 21
600.00
500.00
–
CP 220 B
3
4
50 ÷ 450 37.5 ÷ 25
–
560.00
–
CP 220 A
4
5.5
50 ÷ 450 48.5 ÷ 36
–
668.00
–
CP 220 AH
5.5
7.5
50 ÷ 450 51.5 ÷ 42
–
735.00
–
CP 230 C
3
4
–
560.00
–
CP 230 B
4
5.5
100 ÷ 900 38.5 ÷ 13
–
668.00
–
CP 230 A
5.5
7.5
100 ÷ 900 45.5 ÷ 15
–
735.00
–
CP 250 B-N
7.5
10
100 ÷ 800 57.4 ÷ 31.3
–
942.00
–
CP 250 A-N
11
15
100 ÷ 900 76 ÷ 45.2
–
1,535.00
2
2
2
3
IE3
50 ÷ 250 45.5 ÷ 27
IE3 100 ÷ 850 29.5 ÷ 9
1½"
2"
1"
2"
Pump body: cast iron Impeller: 1=AISI 304 stainless steel; 2=brass; 3=cast iron Three phase motor efficiency class (IEC 60034-30) Protection: IP X5 for CP 220, CP 230, CP 250 Registered EU Design n. 002098434 (CP 100÷210, CP 250) Registered Italian Design n. 72753 (CP 220÷230) Registered trade mark n. 015630908
AL-RED 135m
1¼"
2.2
Stainless steel centrifugal pump POWER
PERFORMANCE
P� Single-phase Three-phase kW HP
1"
CP 200
MODEL
1"
–
AL-RED
PRICE € suct. deliv. Single-ph. Three-ph. PORTS
AL-RED 135
0.75
1
Q l/min
IE3 20 ÷ 160
PORTS
H metres
PRICE € suct. deliv. Single-ph. Three-ph.
21 ÷ 10
1¼"
1"
198,00
213,00
Pump body: AISI 304 stainless steel Impeller: AISI 304 stainless steel Three phase motor efficiency class (IEC 60034-30) AL-RED® Registered trade mark n. 0001575587
8
Price List 50
CENTRIFUGAL PUMPS
CP-ST
Stainless steel centrifugal pumps
MODEL Single-phase CPm 100-ST4 CPm 130-ST4 CPm 132-ST4 CPm 150-ST4 CPm 158-ST4 CPm 170-ST4 CPm 170 M-ST4
CP 100-ST6 CP 130-ST6 CP 132-ST6 CP 150-ST6 CP 158-ST6 CP 170-ST6 CP 170 M-ST6
Single-phase HFm 50B HFm 50A HFm 51B HFm 51A HFm 70C HFm 70B – HFm 5C HFm 5B HFm 5A HFm 5BM HFm 5AM HFm 4 HFm 6C HFm 6B HFm 6A – – – – – –
10 ÷ 90 10 ÷ 100 20 ÷ 120 20 ÷ 150 10 ÷ 120 10 ÷ 140 20 ÷ 160
0.25 0.37 0.55 0.75 0.75 1.1 1.1
0.33 0.50 IE2 0.75 1 1 IE3 1.5 1.5
10 ÷ 90 15.5 ÷ 6.5 10 ÷ 100 21.5 ÷ 9 20 ÷ 120 23 ÷ 12 20 ÷ 150 31 ÷ 14 10 ÷ 120 35.5 ÷ 19 10 ÷ 140 40 ÷ 20 20 ÷ 160 35.5 ÷ 19
1¼"
1"
240.00 245.00 250.00 325.00 325.00 405.00 410.00
255.00 260.00 265.00 335.00 335.00 415.00 420.00
Centrifugal pumps MODEL
0.33 0.50 IE2 0.75 1 1 IE3 1.5 1.5
PORTS
Pump body: AISI 316L stainless steel Impeller: AISI 316L stainless steel Shaft: AISI 316L stainless steel Three phase motor efficiency class (IEC 60034-30)
HF
0.25 0.37 0.55 0.75 0.75 1.1 1.1
PRICE € suct. deliv. Single-ph. Three-ph. 15.5 ÷ 6.5 175.00 190.00 21.5 ÷ 9 180.00 195.00 23 ÷ 12 185.00 200.00 31 ÷ 14 1¼" 1" 235.00 245.00 35.5 ÷ 19 235.00 245.00 40 ÷ 20 330.00 340.00 35.5 ÷ 19 335.00 345.00
PERFORMANCE Q H l/min metres
Pump body: AISI 304 stainless steel Impeller: AISI 304 stainless steel Shaft: AISI 431 stainless steel
CPm 100-ST6 CPm 130-ST6 CPm 132-ST6 CPm 150-ST6 CPm 158-ST6 CPm 170-ST6 CPm 170 M-ST6
Three-phase CP 100-ST4 CP 130-ST4 CP 132-ST4 CP 150-ST4 CP 158-ST4 CP 170-ST4 CP 170 M-ST4
POWER P� kW HP
Three-phase HF 50B HF 50A HF 51B HF 51A HF 70C HF 70B HF 70A HF 5 C HF 5 B HF 5 A HF 5 BM HF 5 AM HF 4 HF 6 C HF 6 B HF 6 A HF 8 B HF 8 A HF 20B-N HF 20A-N HF 30B HF 30A
1
1
1 1
1
2
POWER P� kW HP 0.37 0.55 0.55 0.75 1.1 1.5 2.2 0.55 0.75 1.1 1.1 1.5 0.75 1.1 1.5 2.2 3 4 3 4 5.5 7.5
0.50 0.75 0.75 1 1.5 2 3 0.75 1 1.5 1.5 2 1 1.5 2 3 4 5.5 4 5.5 7.5 10
IE2
IE3
IE3
IE3 IE3
IE3
PERFORMANCE Q H l/min metres
PORTS
PRICE € suct. deliv. Single-ph. Three-ph. 50 ÷ 300 10 ÷ 4 160.00 175.00 50 ÷ 300 12 ÷ 6 165.00 180.00 50 ÷ 300 17.2 ÷ 5.4 196.00 211.00 50 ÷ 300 20.2 ÷ 8.4 1½" 1½" 202.00 217.00 50 ÷ 300 28 ÷ 15 306.00 316.00 50 ÷ 300 32 ÷ 19 330.00 330.00 50 ÷ 300 38 ÷ 25 – 346.00 100 ÷ 400 12 ÷ 6.5 202.00 217.00 100 ÷ 500 13.2 ÷ 5 207.00 222.00 100 ÷ 600 13.8 ÷ 3 2" 2" 220.00 230.00 100 ÷ 600 18.5 ÷ 6 304.00 314.00 100 ÷ 600 21.5 ÷ 10 318.00 318.00 200 ÷ 800 9.3 ÷ 3 2½" 2½" 202.00 217.00 200 ÷ 1000 11.7 ÷ 3 350.00 360.00 200 ÷ 1100 14.5 ÷ 5 3" 3" 370.00 370.00 200 ÷ 1200 18.1 ÷ 6 440.00 385.00 200 ÷ 1200 21 ÷ 9 – 610.00 200 ÷ 1200 24 ÷ 13 – 660.00 400 ÷ 1600 19 ÷ 8 – 610.00 4" 4" 400 ÷ 1800 21.5 ÷ 6 – 660.00 600 ÷ 2000 18 ÷ 13 – 810.00 600 ÷ 2200 23 ÷ 18 – 855.00
Pump body: cast iron Impeller: 1=brass; 2=cast iron Three phase motor efficiency class (IEC 60034-30)
9
Price List 50
CENTRIFUGAL PUMPS WITH OPEN IMPELLER
NGA
Pumps with open impeller MODEL
Single-phase NGAm 1 B NGAm 1 A
PRICE € suct. deliv. Single-ph. Three-ph. 0.55 0.75 50 ÷ 300 17 ÷ 8 202.00 217.00 IE3 1½" 1½" 0.75 1 50 ÷ 350 19.5 ÷ 6 207.00 222.00 POWER P� kW HP
Three-phase NGA 1 B NGA 1 A
PERFORMANCE Q H l/min metres
PORTS
Pump body: cast iron Impeller: AISI 316 stainless steel Three phase motor efficiency class (IEC 60034-30) Registered EU Design n. 002098434
Suitable for pumping water containing suspended solids
NGA-PRO
Stainless steel pumps with open impeller
MODEL Single-phase NGAm 1B-PRO NGAm 1A-PRO
PRICE € suct. deliv. Single-ph. Three-ph. 0.55 0.75 50 ÷ 300 17 ÷ 8 460.00 475.00 IE3 1½" 1½" 0.75 1 50 ÷ 350 19.5 ÷ 6 465.00 480.00 POWER P� kW HP
Three-phase NGA 1B-PRO NGA 1A-PRO
PERFORMANCE Q H l/min metres
PORTS
Pump body, body backplate and impeller: precision cast AISI 316 stainless steel Three phase motor efficiency class (IEC 60034-30) Shaft: AISI 316L stainless steel Registered EU Design n. 002098434
Suitable for pumping water containing suspended solids
CENTRIFUGAL TWIN-IMPELLER PUMPS
2CP
Centrifugal twin-impeller pumps MODEL
Single-phase
Three-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
PRICE € suct. deliv. Single-ph. Three-ph.
1
20 ÷ 100 39 ÷ 15
225.00
240.00
1.1
1.5
20 ÷ 100 52 ÷ 22
345.00
355.00
1.5
2
390.00
390.00
1.1
1.5
345.00
355.00
1.5
2
20 ÷ 140 56 ÷ 30
390.00
390.00
2.2
3
20 ÷ 160 67 ÷ 32
460.00
405.00
3
4
40 ÷ 250 66.5 ÷ 36
–
730.00
4
5.5
–
745.00
5.5
7.5
–
865.00
7.5
10
40 ÷ 250 111 ÷ 74
–
905.00
4
5.5
100 ÷ 350 62 ÷ 35
–
834.00
5.5
7.5
100 ÷ 400 73 ÷ 46
–
850.00
7.5
10
IE3 100 ÷ 400 85 ÷ 60
–
900.00
2CPm 25/130N 2CP 25/130N 1 0.75 2CPm 25/14B
2CP 25/14B
2CPm 25/14A
2CP 25/14A
2CPm 25/16C
2CP 25/16C
2CPm 25/16B
2CP 25/16B
2CPm 25/16A
2CP 25/16A
–
2CP 32/200 C
–
2CP 32/200 B
–
2CP 32/210 B
–
2CP 32/210 A
–
2CP 40/180 C
–
2CP 40/180 B
–
2CP 40/180 A
–
2CP 40/200 B
–
2CP 40/200 A
2
2
2
2
2
2
IE3
IE3
20 ÷ 100 65 ÷ 32 20 ÷ 120 46 ÷ 24
40 ÷ 250 81 ÷ 49
PORTS
1¼"
1"
1½" 1¼"
40 ÷ 250 94 ÷ 56
2" 1½"
9.2 12.5
100 ÷ 450 94 ÷ 61
–
1,535.00
11
100 ÷ 450 102 ÷ 69
–
1,555.00
15
Pump body: cast iron Impellers: 1=AISI 304 stainless steel; 2=brass Three phase motor efficiency class (IEC 60034-30)
10
Price List 50
MULTI-STAGE CENTRIFUGAL PUMPS
2-4CP
Multi-stage centrifugal pumps
MODEL
POWER PERFORMANCE PORTS PRICE P� Q H € kW HP l/min metres suct. deliv. Single-phase Three-phase Single-ph. Three-ph.
2CPm 80 3CPm 60 3CPm 80 4CPm 80 3CPm 100 4CPm 100
2CP 80 3CP 60 3CP 80 4CP 80 3CP 100 4CP 100
0.37 0.50 0.37 0.50 0.45 0.60
IE2
0.55 0.75
5 ÷ 70
26 ÷ 5
5 ÷ 70
30 ÷ 7
5 ÷ 80
38 ÷ 5
5 ÷ 80 50 ÷ 10
1"
1"
0.55 0.75 IE2 5 ÷ 120 37 ÷ 5 0.75
1
IE3 5 ÷ 130 50 ÷ 5
142.00 153.00 153.00 170.00 168.00 197.00
157.00 168.00 168.00 185.00 183.00 212.00
Pump body: cast iron Impellers: Noryl Three phase motor efficiency class (IEC 60034-30) Registered EU Design n. 002073635-0001
2-5CR
Multi-stage centrifugal pumps
MODEL
POWER PERFORMANCE PORTS PRICE P� Q H € Single-phase Three-phase kW HP l/min metres suct. deliv. Single-ph. Three-ph.
2CRm 80 3CRm 60 3CRm 80 4CRm 80 5CRm 80 3CRm 100 4CRm 100 5CRm 100
2CR 80 3CR 60 3CR 80 4CR 80 5CR 80 3CR 100 4CR 100 5CR 100
0.37 0.50 0.37 0.50 0.45 0.60
IE2
0.55 0.75 0.75
1
5 ÷ 70
26 ÷ 5
5 ÷ 70
30 ÷ 7
5 ÷ 80
38 ÷ 5
5 ÷ 80 50 ÷ 10 IE3 5 ÷ 80 66 ÷ 12
0.55 0.75 IE2 5 ÷ 120 37 ÷ 5 0.75
1
1.1
1.5
IE3
5 ÷ 130 50 ÷ 5 5 ÷ 130 62 ÷ 8
Multi-stage centrifugal pumps
MODEL
PRICE € suct. deliv. Single-ph. Three-ph. 1.5 5 ÷ 80 76 ÷ 33 458.00 468.00 2 5 ÷ 80 93 ÷ 43 503.00 503.00 1.5 5 ÷ 130 49 ÷ 24 428.00 438.00 2 5 ÷ 130 65 ÷ 31 448.00 448.00 2.5 5 ÷ 130 81 ÷ 39 – 483.00 IE3 1¼" 1" 3 5 ÷ 130 97 ÷ 46 – 513.00 1.5 20 ÷ 200 43 ÷ 13 428.00 438.00 2 20 ÷ 200 57 ÷ 17 448.00 448.00 2.5 20 ÷ 200 71 ÷ 22 – 483.00 3 20 ÷ 200 85 ÷ 26 – 514.00
POWER PERFORMANCE P� Q H Single-phase Three-phase kW HP l/min metres
5CRm 90 6CRm 90 3CRm 130 4CRm 130 – – 3CRm 200 4CRm 200 – –
1"
175.00 182.00 182.00 195.00 234.00 191.00 230.00 250.00
Pump body: AISI 304 stainless steel Impellers: Noryl Three phase motor efficiency class (IEC 60034-30)
3-6CR
1"
160.00 167.00 167.00 180.00 219.00 176.00 215.00 240.00
5CR 90 6CR 90 3CR 130 4CR 130 5CR 130 6CR 130 3CR 200 4CR 200 5CR 200 6CR 200
1.1 1.5 1.1 1.5 1.8 2.2 1.1 1.5 1.8 2.2
PORTS
Pump body: AISI 304 stainless steel Impellers: Noryl Three phase motor efficiency class (IEC 60034-30) Patent n. EP14755156.8
11
Price List 50
VERTICAL MULTI-STAGE PUMPS
MK
Vertical pumps MODEL
Single-phase Three-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
MKm 3/3-N
MK 3/3-N
0.75
1
10 ÷ 80
50 ÷ 28
425.00
425.00
MKm 3/4-N
MK 3/4-N
1.1
1.5
10 ÷ 80
67 ÷ 38
450.00
450.00
MKm 3/5-N
MK 3/5-N
1.1
1.5
10 ÷ 80
83 ÷ 47
465.00
475.00
MKm 3/6-N
MK 3/6-N
1.5
2
10 ÷ 80
100 ÷ 56
490.00
490.00
MKm 5/4-N
MK 5/4-N
1.1
1.5
20 ÷ 120
55 ÷ 20
450.00
460.00
MKm 5/5-N
MK 5/5-N
1.1
1.5
20 ÷ 120
69 ÷ 25
465.00
475.00
IE3
PRICE € suct. deliv. Single-ph. Three-ph. PORTS
1¼"
1"
MKm 5/6-N
MK 5/6-N
1.5
2
20 ÷ 120
83 ÷ 30
490.00
490.00
MKm 5/7-N
MK 5/7-N
1.8
2.5
20 ÷ 120
96 ÷ 34
510.00
510.00
MKm 5/8-N
MK 5/8-N
2.2
3
20 ÷ 120 110 ÷ 40
560.00
520.00
MKm 8/4-N
MK 8/4-N
1.5
2
40 ÷ 180
470.00
470.00
MKm 8/5-N
MK 8/5-N
1.8
2.5
40 ÷ 180 67.5 ÷ 18
490.00
490.00
MKm 8/6-N
MK 8/6-N
2.2
3
40 ÷ 180
535.00
500.00
54 ÷ 15
82 ÷ 20
Pump body: cast iron and AISI 304 stainless steel Impellers: Noryl Three phase motor efficiency class (IEC 60034-30) Patent n. EP14755156.8
Inlet and outlet threaded �anges kit
CODE
THREAD
PRICE €
ASSMKF030
1" x 1¼"
51.00
The kit consists of two cast iron threaded flanges (ISO 228/1), two gaskets and four screws for connection to the MK pump ports
12
Price List 50
SELF-PRIMING LIQUID RING PUMPS
CK
Self-priming pumps MODEL
POWER P� kW HP Single-phase Three-phase
PERFORMANCE Q H l/min metres
CKm 50
CK 50
0.37 0.50 IE2
5 ÷ 40
31 ÷ 5
CKm 80-E
CK 80 -E
0.55 0.75
5 ÷ 50
46 ÷ 10
IE3
CKm 90-E
CK 90-E
0.75
1
5 ÷ 50
PRICE € suct. deliv. Single-ph. Three-ph. PORTS
¾"
¾"
1"
1"
49 ÷ 13
160.00
175.00
190.00
205.00
197.00
212.00
177.00
192.00
Water pump with bypass that limits maximum dynamic head to 20 metres CKm 50-BP
CK 50-BP
0.25 0.33 IE2
5 ÷ 40
20 ÷ 5
Self-priming pumps MODEL
POWER P� Single-phase Three-phase kW HP
CKRm 80-E
CKR 80-E
0.55 0.75
PERFORMANCE Q H l/min metres 5 ÷ 50
CKRm 90-E
CKR 90-E
0.75
1
PRICE € suct. deliv. Single-ph. Three-ph. PORTS
46 ÷ 10
IE3
¾"
Pump body: cast iron Impeller: brass Three phase motor efficiency class (IEC 60034-30) Motor bracket: patented n. IT1243605 Registered EU Design n. 342159-0008 (CK 80-E/90-E)
CKR*
¾"
1" 5 ÷ 50
235.00
250.00
245.00
260.00
1"
49 ÷ 13
Pump body: cast iron, with stainless steel insert Impeller: brass Three phase motor efficiency class (IEC 60034-30) Motor bracket: patented n. IT1243605 Registered EU Design n. 342159-0008
* CKR = special version with double anti-seize inserts
MT 1 - Flow meter
MODEL
CODE
MAXIMUM FLOW RATE
MAXIMUM PRESSURE
FITTINGS
PRICE €
MT 1
504550
120 l/min
3.5 bar
1" x 1"
140.00
Mechanical flow meter for private use, suitable for: diesel, kerosene (for heating), solvents, antifreeze, very light oils (kinematic viscosity max. 300 cSt) ATTENTION: IT IS NOT SUITABLE for all the others fluids, including water, petrol/gasoline and hydrochloric acid.
Recommended for use with "CK" series pumps
NZ - Dispensing nozzle with hose
MODEL
CODE
ELBOW CONNECTION
PRICE €
NZ-1 NZ-2
50430B
¾"
50430A
1"
58.00 58.00
Aluminium dispensing nozzle complete with 4 metre long hose, reinforced with steel spiral, with threaded fittings
Recommended for use with CKm 50 BP or CK 50 BP series pumps
13
Price List 50
SELF-PRIMING CENTRIFUGAL PUMPS
JSW
Self-priming "JET" pumps MODEL
Single-phase JSWm 1 C JSWm 1 B JSWm 1 A JSWm 2C JSWm 2CL JSWm 2B JSWm 2A JSWm 2AH JSWm 3CH -N JSWm 3BH -N JSWm 3AH -N JSWm 3CM -N JSWm 3BM -N JSWm 3AM -N JSWm 3CL -N JSWm 3BL -N JSWm 3AL -N
PRICE € suct. deliv. Three-phase Single-ph. Three-ph. 0.37 0.50 5 ÷ 60 32 ÷ 10 JSW 1 C 140.00 155.00 0.48 0.65 IE2 5 ÷ 60 34 ÷ 12 JSW 1 B 142.00 157.00 0.55 0.75 5 ÷ 60 43 ÷ 17 JSW 1 A 150.00 165.00 0.75 1 5 ÷ 70 47 ÷ 20 JSW 2C 167.00 182.00 1 1" 1" 0.75 1 5 ÷ 85 36 ÷ 12 JSW 2CL 170.00 185.00 0.90 1.25 IE3 5 ÷ 70 51 ÷ 24 JSW 2B 178.00 193.00 1.1 1.5 5 ÷ 70 55 ÷ 28 JSW 2A 189.00 199.00 1.1 1.5 5 ÷ 45 65 ÷ 32 JSW 2AH 196.00 206.00 1.1 1.5 10 ÷ 70 60 ÷ 31 JSW 3CH -N 335,00 345,00 JSW 3BH -N 1.5 2 10 ÷ 80 70 ÷ 39 352,00 352,00 JSW 3AH -N 2.2 3 10 ÷ 80 90 ÷ 50 395,00 370,00 JSW 3CM -N 1.1 1.5 10 ÷ 120 50 ÷ 20 335,00 345,00 JSW 3BM -N 2 1.5 2 IE3 10 ÷ 120 58 ÷ 30 1¼" 1" 352,00 352,00 JSW 3AM-N 2.2 3 10 ÷ 120 70 ÷ 40 395,00 370,00 JSW 3CL -N 1.1 1.5 10 ÷ 160 40 ÷ 15 335,00 345,00 JSW 3BL -N 1.5 2 10 ÷ 160 48 ÷ 22 352,00 352,00 JSW 3AL -N 2.2 3 10 ÷ 160 60 ÷ 35 395,00 370,00 POWER P� kW HP
PERFORMANCE Q H l/min metres
PORTS
Pump body: cast iron Impeller: 1=AISI 304 stainless steel; 2=brass
VERSIONS WITH TECHNOPOLYMER IMPELLER JSWm 1CX JSWm 1 BX JSWm 1 AX JSWm 2CX JSWm 2BX JSWm 2AX
JSW 1CX JSW 1 BX JSW 1 AX JSW 2CX JSW 2BX JSW 2AX
0.37 0.48 0.55 0.75 0.90 1.1
0.50 0.65 IE2 0.75 1 1.25 IE3 1.5
5 ÷ 60 5 ÷ 60 5 ÷ 60 5 ÷ 70 5 ÷ 70 5 ÷ 70
32 ÷ 10 34 ÷ 12 43 ÷ 17 47 ÷ 20 51 ÷ 24 55 ÷ 28
1"
132.00 134.00 142.00 157.00 168.00 178.00
1"
147.00 149.00 157.00 172.00 183.00 188.00
Pump body: cast iron Impeller: Noryl Three phase motor efficiency class (IEC 60034-30) Registered EU Design n. 002218610 European Patent n. 1 510 696 (JSW 1, JSW 2) JSW Registered trade mark n. 013073135
JDW
Self-priming "JET" pumps for 4" wells MODEL
Single-phase JDWm 1B-N 30-4” JDWm 1A-N 30-4" JDWm 2 30-4”
POWER P� kW HP
PERFORMANCE* PORTS Q H ejector pump l/min metres suct. deliv.
0.60 0.85 IE2 0.75 1 IE3 1.1 1.5
2 ÷ 24 2 ÷ 24 2 ÷ 28
41 ÷ 12 50 ÷ 20 75 ÷ 30
1"
1"
2 ÷ 20 2 ÷ 24 2 ÷ 24
37 ÷ 12 41 ÷ 12 50 ÷ 20
1"
1"
PRICE € Single-ph. 185,00 192,00 330,00
Pump body and ejector: cast iron Impeller: AISI 304 stainless steel (brass for JDWm 2)
VERSIONS WITH TECHNOPOLYMER IMPELLER JDWm 1CX-N JDWm 1BX-N JDWm 1AX-N
30-4” 30-4” 30-4”
0.50 0.70 IE2 0.60 0.85 0.75 1 IE3
Pump body: cast iron Impeller: Noryl Three phase motor efficiency class (IEC 60034-30)
* Performance with 15 metres suction height
14
170,00 174,00 180,00
Price List 50
SELF-PRIMING CENTRIFUGAL PUMPS
JCR
Self-priming "JET" pumps MODEL
Single-phase JCRm 1C JCRm 1 B JCRm 1 A JCRm 2C JCRm 2CL JCRm 2B JCRm 2A
Three-phase JCR 1 C JCR 1 B JCR 1 A JCR 2C JCR 2CL JCR 2B JCR 2A
PRICE € suct. deliv. Single-ph. Three-ph. 32 ÷ 10 155.00 170.00 34 ÷ 12 157.00 172.00 43 ÷ 17 164.00 179.00 47 ÷ 19 1" 1" 186.00 201.00 36 ÷ 12 189.00 204.00 52 ÷ 23 197.00 212.00 56 ÷ 27 207.00 217.00
POWER P� kW HP
PERFORMANCE Q H l/min metres
0.37 0.48 0.55 0.75 0.75 0.90 1.1
5 ÷ 60 5 ÷ 60 5 ÷ 60 5 ÷ 70 5 ÷ 85 5 ÷ 70 5 ÷ 70
0.50 0.65 IE2 0.75 1 1 IE3 1.25 1.5
PORTS
Pump body: AISI 304 stainless steel Impeller: AISI 304 stainless steel Three phase motor efficiency class (IEC 60034-30) European Patent n. 1 510 696
SELF-PRIMING MULTI-STAGE PUMPS
PLURIJET
Multi-stage pumps
MODEL Single-phase PLURIJETm 3/60 -N PLURIJETm 3/80 -N PLURIJETm 4/80 -N PLURIJETm 3/100 -N PLURIJETm 4/100 -N
Three-phase PLURIJET 3/60 -N PLURIJET 3/80 -N PLURIJET 4/80 -N PLURIJET 3/100 -N PLURIJET 4/100 -N
Single-phase PLURIJETm 5/90 -N PLURIJETm 6/90 -N PLURIJETm 3/130 -N PLURIJETm 4/130 -N – – PLURIJETm 3/200 -N PLURIJETm 4/200 -N – –
5 ÷ 70
30 ÷ 7
0.48 0.65 IE2 5 ÷ 80
38 ÷ 5
0.37 0.50 0.55 0.75
5 ÷ 80 50 ÷ 10
1"
1"
0.55 0.75 IE2 5 ÷ 120 37 ÷ 5 0.75
1
IE3 5 ÷ 130 50 ÷ 5
170.00 175.00 185.00 185.00 225.00
185.00 190.00 200.00 200.00 240.00
Multi-stage pumps
MODEL
PERFORMANCE PORTS PRICE Q H € l/min metres suct. deliv. Single-ph. Three-ph.
Pump body: AISI 304 stainless steel Impellers: Noryl Three phase motor efficiency class (IEC 60034-30) PLURIJET® Registered trade mark n. 003974301
PLURIJET
POWER P� kW HP
Three-phase PLURIJET 5/90 -N PLURIJET 6/90 -N PLURIJET 3/130 -N PLURIJET 4/130 -N PLURIJET 5/130 -N PLURIJET 6/130 -N PLURIJET 3/200 -N PLURIJET 4/200 -N PLURIJET 5/200 -N PLURIJET 6/200 -N
POWER P� kW HP
PERFORMANCE PORTS PRICE Q H € l/min metres suct. deliv. Single-ph. Three-ph.
1.1
1.5
5 ÷ 80 76 ÷ 33
1.5
2
5 ÷ 80 93 ÷ 43
1.1
1.5
5 ÷ 130 49 ÷ 24
1.5
2
5 ÷ 130 65 ÷ 31
1.8
2.5
2.2
3
1.1
1.5
20 ÷ 200 43 ÷ 13
1.5
2
20 ÷ 200 57 ÷ 17
1.8
2.5
20 ÷ 200 71 ÷ 22
2.2
3
20 ÷ 200 85 ÷ 26
IE3
5 ÷ 130 81 ÷ 39 5 ÷ 130 97 ÷ 46
1¼"
1"
470.00 515.00 440.00 460.00 – – 440.00 460.00 – –
480.00 515.00 450.00 460.00 495.00 525.00 450.00 460.00 495.00 526.00
Pump body: AISI 304 stainless steel Impellers: Noryl Three phase motor efficiency class (IEC 60034-30) PLURIJET® Registered trade mark n. 003974301 Patent n. EP14755156.8
15
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
F
Monoblock centrifugal pumps MODEL
POWER
(n= 2900 min��)
P�
Single-phase Fm 32/160C Fm 32/160 B – – – – – – – – – Fm 40/125C Fm 40/125B – Fm 40/160 C – – – – – – – Fm 50/125 C – – – – – – – – – – – – – – – – – – – – – – –
Three-phase F 32/160C F 32/160 B F 32/160 A F 32/200 C F 32/200 B F 32/200 A F 32/200 BH F 32/200 AH F 32/250C F 32/250B F 32/250A F 40/125C F 40/125B F 40/125A F 40/160C F 40/160 B F 40/160 A F 40/200 B F 40/200 A F 40/250 C F 40/250 B F 40/250 A F 50/125C F 50/125 B F 50/125 A F 50/160 C F 50/160 B F 50/160 A F 50/200 C F 50/200 B F 50/200 A F 50/200 AR F 50/250 D F 50/250 C F 50/250 B F 50/250 A F 50/250 AR F 65/125 C F 65/125 B F 65/125 A F 65/160 C F 65/160 B F 65/160 A F 65/200 B F 65/200 A F 65/200 AR
kW
(EN 733)
PERFORMANCE
HP
Q
H
l/min
metres
1.5
2
100 ÷ 350
24 ÷ 14
1 2.2
3
100 ÷ 400
30 ÷ 17
3
4
100 ÷ 450
37 ÷ 24
4
5.5
100 ÷ 450 44 ÷ 31.5
5.5
7.5
100 ÷ 500
51 ÷ 36
1 7.5
10
IE3 100 ÷ 500
57 ÷ 44
3
4
100 ÷ 300
45 ÷ 37
4
5.5
100 ÷ 320
55 ÷ 44
9.2 12.5
100 ÷ 450
75 ÷ 60
11
15
100 ÷ 500
87 ÷ 70
15
20
100 ÷ 500
97 ÷ 80
1.1
1.5
100 ÷ 550
16 ÷ 6
1 1.5
2
100 ÷ 600
20.5 ÷ 9
2.2
3
100 ÷ 700
26 ÷ 10
2.2
3
100 ÷ 600
27 ÷ 14
3
4
100 ÷ 600
32 ÷ 20
5.5 IE3 100 ÷ 700
38 ÷ 20
5.5
7.5
100 ÷ 700
47 ÷ 28
7.5
10
100 ÷ 700
55 ÷ 41
9.2 12.5
100 ÷ 700
64 ÷ 47
11
15
100 ÷ 700
71 ÷ 55
15
20
100 ÷ 700
88 ÷ 72
2.2
3
300 ÷ 1200 17.5 ÷ 6
3
4
300 ÷ 1200 20.7 ÷ 9
4
5.5
300 ÷ 1200 23.5 ÷ 13
4
5.5
300 ÷ 1000 27 ÷ 16
5.5
7.5
300 ÷ 1100 32 ÷ 21
7.5
10
300 ÷ 1100 37 ÷ 27
11
15
400 ÷ 1700 44 ÷ 30
15
20
400 ÷ 1700 52 ÷ 38
18.5
25
400 ÷ 1800 61 ÷ 45
22
30
400 ÷ 1800 69 ÷ 53
1
1
4 1
2
1
1
2
9.2 12.5 2
2
2
300 ÷ 900
51 ÷ 32
300 ÷ 900
59 ÷ 42
11
15
15
20
18.5
25
300 ÷ 1000 85 ÷ 73
22
30
300 ÷ 1000 95 ÷ 83
4
5.5
600 ÷ 1800 16 ÷ 11
5.5
7.5
600 ÷ 2000 18 ÷ 13
7.5
10
600 ÷ 2200 23 ÷ 18
IE3
300 ÷ 1000 72 ÷ 59
9.2 12.5
600 ÷ 2200 32 ÷ 22
11
15
600 ÷ 2400 36.5 ÷ 23
15
20
600 ÷ 2400 40.5 ÷ 28
15
20
200 ÷ 2400 44 ÷ 30.5
25
200 ÷ 2500 50 ÷ 36.5
30
200 ÷ 2600 57 ÷ 42
2 18.5 22
16
PRICE PRICE Pumps Counter�anges* € € Single-ph. Three-ph. 528.00 505.00 644.00 530.00 – 605.00 – 702.00 – 735.00 44.00 – 780.00 – 675.00 – 700.00 – 1,530.00 – 1,550.00 DN 50 x32(2" x 1¼") – 1,640.00 cod. ASS14FL0320 485.00 490.00 516.00 516.00 – 537.00 638.00 520.00 – 605.00 49.50 – 655.00 – 780.00 – 820.00 – 1,575.00 – 1,600.00 DN 65 x 40 (2½" x 1½") – 1,680.00 cod. ASS14FL0400 630.00 520.00 – 605.00 – 665.00 – 715.00 – 755.00 – 790.00 – 1,555.00 – 1,660.00 51.50 – 1,760.00 – 1,885.00 – 1,565.00 – 1,585.00 – 1,670.00 – 1,760.00 DN 65 x50 (2½" x 2") – 1,885.00 cod. ASS14FL0500 – 800.00 – 830.00 – 870.00 – 1,530.00 56.00 – 1,550.00 – 1,635.00 – 1,690.00 – 1,780.00 DN 80 x65 (3" x 2½") – 1,895.00 cod. ASS14FL0650
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
F
Monoblock centrifugal pumps MODEL
POWER
(n= 2900 min��)
P�
Three-phase
metres
40
400 ÷ 2350
76 ÷ 53
4,225.00
37
50
400 ÷ 2500
87 ÷ 62
4,540.00
F 65/250A
45
60
400 ÷ 2600
95 ÷ 68
4,660.00
F 80/160D
11
15
500 ÷ 4000
25 ÷ 10
1,580.00
15
20
500 ÷ 4000
30 ÷ 15
1,690.00
25 IE3 500 ÷ 4000
35 ÷ 20
1,780.00
22
30
500 ÷ 4000
40 ÷ 25
1,895.00
30
40
500 ÷ 3650
56 ÷ 34.5
4,260.00
37
50
500 ÷ 3900
62 ÷ 40
4,600.00
45
60
600 ÷ 3600
77 ÷ 54
4,760.00
55
75
600 ÷ 3900
88.5 ÷ 60
10,035.00
15
20
1000 ÷ 5000
28.5 ÷ 11
1,755.00
25
1000 ÷ 5500
32.5 ÷ 11
1,850.00
1000 ÷ 6000
37 ÷ 13
1,960.00
833 ÷ 4650
51 ÷ 28
4,420.00
833 ÷ 4900
57 ÷ 33
4,750.00
F 80/160B
2
2
F 80/160A F 80/200B F 80/200A F 80/250B F 80/250A
2
2
F 100/160C-N F 100/160B-N
18.5
2 18.5
F 100/160A-N
22
30
F 100/200C
30
40
37
50
45
60
833 ÷ 5250
63 ÷ 38
4,850.00
55
75
800 ÷ 5150
75 ÷ 48
10,185.00
75
100
800 ÷ 5750
89 ÷ 58
10,400.00
F 100/200B
2
F 100/200A F 100/250B F 100/250A
l/min
30
F 80/160C
H
HP
F 65/250B
Q
PRICE Pumps € Three-phase
PERFORMANCE
kW
F 65/250C
(EN 733)
2
IE3
PRICE Counter�anges* €
56.00 DN 80 x 65 (3" x 2½") cod. ASS14FL0650
69.00
DN 100 x 80 (4" x 3") cod. ASS14FL0800
83.00
DN 125 x 100 (5" x 4") cod. ASS14FL1000
Pump body: cast iron Impeller: 1=brass; 2=cast iron Three phase motor efficiency class (IEC 60034-30) Protection: IP X5
* Counterflanges KIT including screws, nuts and gaskets has to be ordered separately
F-INOX
Monoblock stainless steel centrifugal pumps POWER
(EN 733)
Q
H
l/min
metres
PRICE € Three-phase
300 ÷ 1000
27 ÷ 16
2,770.00
5.5
7.5 IE3 300 ÷ 1100
32 ÷ 21
2,820.00
F 50/160 A-I
7.5
10
300 ÷ 1100
37 ÷ 27
2,860.00
F 65/125C-I
4
5.5
600 ÷ 1800
16 ÷ 11
3,290.00
F 65/125 B-I
5.5
7.5 IE3 600 ÷ 2000
18 ÷ 13
3,340.00
F 65/125 A-I
7.5
10
23 ÷ 18
3,370.00
MODEL (n= 2900 min��) Three-phase
kW
F 50/160C-I
4
F 50/160 B-I
P� HP 5.5
PERFORMANCE
600 ÷ 2200
Pump body: cast AISI 316 stainless steel (without counterflanges) Impeller: cast AISI 316 stainless steel Shaft: AISI 316L stainless steel Three phase motor efficiency class (IEC 60034-30) Protection: IP X5
17
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
F4
Monoblock centrifugal pumps MODEL
POWER
(n= 1450 min��)
P�
Three-phase
F4-32/160B
kW
HP
0.37
0.5
1
F4-32/160A F4-32/200B
(EN 733)
Q
H
l/min
metres
PRICE Pumps € Three-phase
50 ÷ 200
7.5 ÷ 4.5
495.00
PERFORMANCE
PRICE Counter�anges* €
IE2 0.37
0.5
50 ÷ 225
9÷5
495.00
0.75
1
50 ÷ 250
12.5 ÷ 9
650.00
1.1
1.5
50 ÷ 250
14 ÷ 10.5
670.00
0.75
1
50 ÷ 150
11.3 ÷ 9.2
690.00
50 ÷ 160
13.8 ÷ 11
690.00 975.00
1
F4-32/200A F4-32/200BH 1
F4-32/200AH
0.75
1
F4-32/250C
1.1
1.5
50 ÷ 220
18.4 ÷ 15
1.5
2
50 ÷ 250
21.7 ÷ 17.4
1,000.00
F4-32/250A
2.2
3
50 ÷ 270
23.8 ÷ 18.7
1,020.00
F4-40/160B
0.37
0.5
50 ÷ 320
7.5 ÷ 3.5
505.00
F4-32/250B
1
1
F4-40/160A
IE3
0.75
50 ÷ 350
9 ÷ 4.5
515.00
0.75
1
50 ÷ 350
11.5 ÷ 7
690.00
F4-40/200A
1.1
1.5
50 ÷ 350
13.8 ÷ 10
715.00
F4-40/250C
1.1
1.5
50 ÷ 400
15.5 ÷ 10
970.00
1.5
2
50 ÷ 400
17.5 ÷ 12
990.00
2.2
3
50 ÷ 400
22 ÷ 17
0.55
0.75
150 ÷ 600
5÷2
530.00
1
F4-40/250B
2
F4-40/250A F4-50/125B 1
F4-50/125A
IE3
1,020.00
49.50
DN 65 x 40 (2½" x 1½") cod. ASS14FL0400
IE2 0.55
0.75
150 ÷ 600
6÷3
530.00
0.75
1
150 ÷ 650
8 ÷ 3.8
680.00
F4-50/160A
1.1
1.5
150 ÷ 700
9.3 ÷ 4.5
700.00
F4-50/200C
1.5
2
200 ÷ 850
11 ÷ 7.5
960.00
F4-50/200B
2.2
3
200 ÷ 850
13 ÷ 9.5
990.00
2.2
3
200 ÷ 900
15 ÷ 11.2
990.00
F4-50/200AR
3
4
200 ÷ 900
17 ÷ 13.2
1,020.00
F4-50/250D
1.1
1.5
150 ÷ 650
12.5 ÷ 5
965.00
F4-50/250C
1.5
2
150 ÷ 700
14 ÷ 5
985.00
2.2
3
150 ÷ 700
18 ÷ 10.5
1,030.00
2.2
3
150 ÷ 700
20 ÷ 13
1,030.00
3
4
150 ÷ 700
23.5 ÷ 17
1,050.00
F4-50/160B
DN 50 x 32 (2" x 1¼") cod. ASS14FL0320
IE2 0.55
F4-40/200B
44.00
1
2
F4-50/200A
F4-50/250B F4-50/250A F4-50/250AR
2
18
IE3
51.50
DN 65 x 50 (2½" x 2") cod. ASS14FL0500
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
F4
Monoblock centrifugal pumps MODEL
POWER
(n= 1450 min��)
P�
Three-phase
(EN 733)
PERFORMANCE Q
H
l/min
metres
PRICE Pumps € Three-phase
kW
HP
0.75
1
300 ÷ 1100
4.7 ÷ 3
760.00
F4-65/125A
1.1
1.5
300 ÷ 1200
5.7 ÷ 4
780.00
F4-65/160C
1.1
1.5
300 ÷ 1100
8 ÷ 5.5
880.00
1.5
2
300 ÷ 1200
9.1 ÷ 5.7
900.00
2.2
3
IE3 300 ÷ 1200
10.1 ÷ 7
930.00
2.2
3
300 ÷ 1250
12 ÷ 8.5
1,020.00
F4-65/200AR
3
4
300 ÷ 1300
14 ÷ 10
1,050.00
F4-65/250B
4
5.5
200 ÷ 1250 21.8 ÷ 15.5
1,790.00
F4-65/250A
5.5
7.5
200 ÷ 1300
23.5 ÷ 17
1,810.00
F4-80/160D
1.5
2
300 ÷ 2000
6.3 ÷ 2.5
950.00
F4-80/160C
2.2
3
300 ÷ 2000
7.5 ÷ 3.8
990.00
F4-80/160B
2.2
3
300 ÷ 2000
8.8 ÷ 5
990.00
F4-80/160A
3
4
300 ÷ 2000
10 ÷ 6.2
1,010.00
14 ÷ 9
1,610.00
F4-65/125B
PRICE Counter�anges* €
2
F4-65/160B
2
F4-65/160A F4-65/200A
56.00
2
2
DN 80 x 65 (3" x 2½") cod. ASS14FL0650
2
IE3
F4-80/200B
4
5.5
300 ÷ 1800
5.5
7.5
300 ÷ 1900 15.5 ÷ 10.5
1,735.00
5.5
7.5
300 ÷ 1800 19.5 ÷ 13.5
2,110.00
F4-80/250A
7.5
10
300 ÷ 1950
22 ÷ 15
2,140.00
F4-100/160B-N
2.2
3
400 ÷ 2750
8.1 ÷ 2.7
1,170.00
F4-100/160A-N
3
4
400 ÷ 3000
9.2 ÷ 3.2
1,200.00
F4-100/200C
4
5.5
400 ÷ 2300
12.7 ÷ 7
1,875.00
5.5
7.5
IE3 400 ÷ 2400
14.2 ÷ 8.5
1,970.00
5.5
7.5
400 ÷ 2600
15.8 ÷ 9.5
1,970.00
7.5
10
400 ÷ 2600 18.5 ÷ 11.5
2,430.00
9.2
12.5
400 ÷ 2900
2,530.00
69.00
2
F4-80/200A F4-80/250B 2
DN 100 x 80 (4" x 3") cod. ASS14FL0800
2
F4-100/200B
2
F4-100/200A F4-100/250B 2
F4-100/250A
22 ÷ 13.5
83.00
DN 125 x 100 (5" x 4") cod. ASS14FL1000
Pump body: cast iron Impeller: 1=brass; 2=cast iron Three phase motor efficiency class (IEC 60034-30) Protection: IP X5
* Counter�anges KIT including screws, nuts and gaskets has to be ordered separately
19
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
FG
Standardized centrifugal pumps with pedestal
MODEL
2 POLES n= 2900 min�� P� POWER REQUIRED
Pump
PERFORMANCE
(EN 733)
4 POLES n= 1450 min�� P� POWER REQUIRED
PERFORMANCE
PRICE
PRICE
Pumps
Counter�anges* €
kW
HP
Q m³/h
H metres
kW
HP
Q m³/h
H metres
1.5
2
6 ÷ 21
24 ÷ 14
0.25
0.33
3 ÷ 10.5
6 ÷ 3.5
€ 638.00
2.2
3
6 ÷ 24
30 ÷ 17
0.37
0.5
3 ÷ 12
7.5 ÷ 4
638.00
FG-32/160A
3
4
6 ÷ 27
37 ÷ 24
0.37
0.5
3 ÷ 13.5
9÷6
638.00
FG-32/200C
4
5.5
6 ÷ 27
44 ÷ 31.5
0.55
0.75
3 ÷ 13.5
11 ÷ 8
700.00
5.5
7.5
6 ÷ 30
51 ÷ 36
0.75
1
3 ÷ 15
12.5 ÷ 9
700.00
7.5
10
6 ÷ 30
57 ÷ 44
1.1
1.5
3 ÷ 15
14 ÷ 11
700.00
3
4
6 ÷ 18
45 ÷ 37
0.55
0.75
3 ÷ 9
11 ÷ 9
700.00
4
5.5
6 ÷ 19.2
55 ÷ 44
0.55
0.75
3 ÷ 9.6
13.8 ÷ 11
700.00
9.2
12.5
6 ÷ 27
75 ÷ 60
1.1
1.5
3 ÷ 13.2
18.4 ÷ 15
945.00
11
15
6 ÷ 30
87 ÷ 70
1.5
2
3 ÷ 15
21.7 ÷ 17.4
945.00
FG-32/250A
15
20
6 ÷ 30
97 ÷ 80
2.2
3
3 ÷ 16.2
23.8 ÷ 18.7
945.00
FG-40/125C
1.1
1.5
6 ÷ 33
16 ÷ 6
–
–
–
–
660.00
1.5
2
6 ÷ 36
20.5 ÷ 9
–
–
–
–
660.00
FG-40/125A
2.2
3
6 ÷ 42
26 ÷ 10
–
–
–
–
660.00
FG-40/160C
2.2
3
6 ÷ 36
27 ÷ 14
0.37
0.5
3 ÷ 18
6.5 ÷ 3.5
638.00
3
4
6 ÷ 36
32 ÷ 20
0.37
0.5
3 ÷ 18
8÷5
638.00
4
5.5
6 ÷ 42
38 ÷ 20
0.55
0.75
3 ÷ 21
9.5 ÷ 5
638.00
5.5
7.5
6 ÷ 42
47 ÷ 28
0.75
1
3 ÷ 21
11.5 ÷ 7
735.00
7.5
10
6 ÷ 42
55 ÷ 41
1.1
1.5
3 ÷ 21
13.5 ÷ 10
735.00
9.2
12.5
6 ÷ 42
64 ÷ 47
1.1
1.5
3 ÷ 21
16 ÷ 11.5
945.00
11
15
6 ÷ 42
71 ÷ 55
1.5
2
3 ÷ 21
17.5 ÷ 13.5
945.00
FG-40/250A
15
20
6 ÷ 42
88 ÷ 72
2.2
3
3 ÷ 21
22 ÷ 18
945.00
FG-50/125C
2.2
3
18 ÷ 72
17.5 ÷ 6
0.37
0.5
9 ÷ 36
4 ÷ 1.5
638.00
3
4
18 ÷ 72
20.7 ÷ 9
0.55
0.75
9 ÷ 36
5÷2
638.00
FG-50/125A
4
5.5
18 ÷ 72
23.5 ÷ 13
0.55
0.75
9 ÷ 36
6÷3
638.00
FG-50/160C
4
5.5
18 ÷ 60
27 ÷ 16
0.55
0.75
9 ÷ 30
7÷4
700.00
5.5
7.5
18 ÷ 66
32 ÷ 21
0.75
1
9 ÷ 33
8÷5
700.00
FG-50/160A
7.5
10
18 ÷ 66
37 ÷ 27
1.1
1.5
9 ÷ 33
9÷7
700.00
FG-50/200C
11
15
24 ÷ 102
44 ÷ 30
1.5
2
12 ÷ 51
11 ÷ 7.5
910.00
15
20
24 ÷ 102
52 ÷ 38
2.2
3
12 ÷ 51
13 ÷ 9.5
910.00
18.5
25
24 ÷ 108
61 ÷ 45
2.2
3
12 ÷ 54
15 ÷ 11
910.00
FG-50/200AR
22
30
24 ÷ 108
69 ÷ 53
3
4
12 ÷ 54
17 ÷ 13
910.00
FG-50/250D
9.2
12.5
18 ÷ 54
51 ÷ 32
1.1
1.5
9 ÷ 27
12.5 ÷ 8
925.00
FG-50/250C
11
15
18 ÷ 54
59 ÷ 42
1.5
2
9 ÷ 27
14.5 ÷ 10.5
925.00
15
20
18 ÷ 60
72 ÷ 59
2.2
3
9 ÷ 30
18 ÷ 14.5
925.00
18.5
25
18 ÷ 60
85 ÷ 73
2.2
3
9 ÷ 30
21 ÷ 18
925.00
FG-50/250AR
22
30
18 ÷ 60
95 ÷ 83
3
4
9 ÷ 30
24 ÷ 21
925.00
FG-65/125C
4
5.5
36 ÷ 108
16 ÷ 11
0.55
0.75
18 ÷ 54
4 ÷ 2.5
790.00
5.5
7.5
36 ÷ 108
18 ÷ 13
0.75
1
18 ÷ 60
4.5 ÷ 3
790.00
FG-65/125A
7.5
10
36 ÷ 132
23 ÷ 18
1.1
1.5
18 ÷ 66
5.5 ÷ 4.5
790.00
FG-65/160C
9.2
12.5
36 ÷ 132
32 ÷ 22
1.1
1.5
18 ÷ 66
8 ÷ 5.5
915.00
11
15
36 ÷ 144
36.5 ÷ 23
1.5
2
18 ÷ 72
9 ÷ 5.5
915.00
15
20
36 ÷ 144
40.5 ÷ 28
2.2
3
18 ÷ 72
10 ÷ 7
915.00
FG-32/160C FG-32/160B
FG-32/200B
1
1
FG-32/200A FG-32/200BH FG-32/200AH
1
FG-32/250C FG-32/250B
FG-40/125B
FG-40/160B
2
1
1
FG-40/160A FG-40/200B FG-40/200A
1
FG-40/250C FG-40/250B
FG-50/125B
FG-50/160B
FG-50/200B FG-50/200A
FG-50/250B
2
1
1
2
2
FG-50/250A
FG-65/125B
FG-65/160B FG-65/160A
2
2
20
44.00
DN 50 x 32 (2" x 1¼") cod. ASS14FL0320
49.50
DN 65 x 40 (2½" x 1½") cod. ASS14FL0400
51.50
DN 65 x 50 (2½" x 2") cod. ASS14FL0500
56.00 DN 80 x 65 (3" x 2½") cod. ASS14FL0650
Price List 50
STANDARDIZED CENTRIFUGAL PUMPS
FG
Standardized centrifugal pumps with pedestal
MODEL
2 POLES n= 2900 min�� P� POWER REQUIRED
Pump
PERFORMANCE
(EN 733)
4 POLES n= 1450 min�� P� POWER REQUIRED
PERFORMANCE
PRICE
PRICE
Pumps
Counter�anges*
kW
HP
Q m³/h
H metres
kW
HP
Q m³/h
H metres
15
20
12 ÷ 144
44 ÷ 30.5
2.2
3
6 ÷ 72
10.5 ÷ 7.3
€ 945.00
18.5
25
12 ÷ 150
50 ÷ 36.5
2.2
3
6 ÷ 75
12 ÷ 8.5
945.00
FG-65/200AR
22
30
12 ÷ 156
57 ÷ 42
3
4
6 ÷ 78
14 ÷ 10
945.00
FG-65/250C
30
40
24 ÷ 141
76 ÷ 53
3
4
12 ÷ 70.5
19 ÷ 13
1,385.00
37
50
24 ÷ 150
87 ÷ 62
4
5.5
12 ÷ 75
21.5 ÷ 15.5
1,385.00
FG-65/250A
45
60
24 ÷ 156
95 ÷ 68
5.5
7.5
12 ÷ 78
23.5 ÷ 17
1,385.00
FG-80/160D
11
15
30 ÷ 240
25 ÷ 10
1.5
2
15 ÷ 120
6 ÷ 2.5
965.00
15
20
30 ÷ 240
30 ÷ 15
2.2
3
15 ÷ 120
7.5 ÷ 3.5
965.00
18.5
25
30 ÷ 240
35 ÷ 20
2.2
3
15 ÷ 120
8.5 ÷ 5
965.00
FG-80/160A
22
30
30 ÷ 240
40 ÷ 25
3
4
15 ÷ 120
10 ÷ 6
965.00
FG-80/200B
30
40
30 ÷ 219
56 ÷ 34.5
4
5.5
15 ÷ 109.5
14 ÷ 8.5
1,155.00
37
50
30 ÷ 234
62 ÷ 40
5.5
7.5
15 ÷ 117
15.5 ÷ 10
1,155.00
45
60
36 ÷ 216
77 ÷ 54
5.5
7.5
18 ÷ 108
19 ÷ 13.5
1,470.00
55
75
36 ÷ 234
88.5 ÷ 60
7.5
10
18 ÷ 117
22 ÷ 15
1,470.00
15
20
60 ÷ 300
28.5 ÷ 11
–
–
–
–
1,060.00
18.5
25
60 ÷ 330
32.5 ÷ 11
2.2
3
24 ÷ 165
8.1 ÷ 2.7
1,060.00
FG-100/160A-N
22
30
60 ÷ 360
37 ÷ 13
3
4
24 ÷ 180
9.2 ÷ 3.2
1,060.00
FG-100/200C
30
40
48 ÷ 279
51 ÷ 28
4
5.5
24 ÷ 139.5
12.5 ÷ 7
1,310.00
37
50
48 ÷ 294
57 ÷ 33
5.5
7.5
24 ÷ 147
14 ÷ 8
1,310.00
45
60
48 ÷ 315
63 ÷ 38
5.5
7.5
24 ÷ 157.5
15.5 ÷ 9.5
1,310.00
55
75
48 ÷ 309
75 ÷ 48
7.5
10
24 ÷ 154.5
18.5 ÷ 12
1,590.00
75
100
48 ÷ 345
89 ÷ 58
9.2
12.5
24 ÷ 172.5
22 ÷ 14.5
1,590.00
FG-65/200B FG-65/200A
FG-65/250B
FG-80/160C FG-80/160B
FG-80/200A FG-80/250B FG-80/250A
2
2
2
2
2
FG-100/160C-N FG-100/160B -N
FG-100/200B
2
2
FG-100/200A FG-100/250B FG-100/250A
2
€
56.00 DN 80 x 65 (3" x 2½") cod. ASS14FL0650
69.00
DN 100 x 80 (4" x 3") cod. ASS14FL0800
83.00
DN 125 x 100 (5" x 4") cod. ASS14FL1000
Pump body: cast iron Impeller: 1=brass; 2=cast iron
* Counter�anges KIT including screws, nuts and gaskets has to be ordered separately
Upon request the FG2 and FG4 pumps can be tested in accordance with EN 12845 for use in fire fighting . Add to the price of the pump
€ 120.00
21
Price List 50
MULTI-STAGE SUBMERSIBLE PUMPS
UP-GE
Submersible pumps with �oat switch
MODEL Single-phase UPm 2/2-GE UPm 2/3-GE UPm 2/4-GE UPm 2/5-GE UPm 2/6-GE UPm 4/3-GE UPm 4/4-GE UPm 4/5-GE UPm 4/6-GE UPm 8/3-GE UPm 8/4-GE
POWER P� kW HP 0.37
0.5
10 ÷ 80
32 ÷ 17
0.55
0.75
10 ÷ 80
46 ÷ 23
0.75
1
10 ÷ 80
61 ÷ 31
1.1
1.5
10 ÷ 80
79 ÷ 40
1.5
2
10 ÷ 80
93 ÷ 48
0.55
0.75
20 ÷ 120
39 ÷ 12
0.75
1
20 ÷ 120
52 ÷ 16
1.1
1.5
20 ÷ 120
65 ÷ 20
1.5
2
20 ÷ 120
78 ÷ 24
1.1
1.5
40 ÷ 180
39 ÷ 9
1.5
2
40 ÷ 180
51 ÷ 12
POWER P� kW HP
Single-phase Three-phase 0.37 UPm 2/2 UP 2/2 0.55 UPm 2/3 UP 2/3 0.75 UPm 2/4 UP 2/4 1.1 UPm 2/5 UP 2/5 1.5 UPm 2/6 UP 2/6 0.55 UPm 4/3 UP 4/3 0.75 UPm 4/4 UP 4/4 1.1 UPm 4/5 UP 4/5 1.5 UPm 4/6 UP 4/6 1.1 UPm 8/3 UP 8/3 1.5 UPm 8/4 UP 8/4
1¼"
1¼"
1¼"
PRICE € Single-phase 360.00 370.00 380.00 405.00 425.00 370.00 380.00 405.00 425.00 405.00 425.00
Submersible pumps without �oat switch MODEL
PORT of delivery
20 m long power cable (DRINCABLE® type approved for use in drinking water by “WRAS” in compliance with BS 6920, approval n. 7513)
UP
PERFORMANCE Q H l/min metres
PERFORMANCE Q H l/min metres
0.5
10 ÷ 80
32 ÷ 17
0.75
10 ÷ 80
46 ÷ 23
1
10 ÷ 80
61 ÷ 31
1.5
10 ÷ 80
79 ÷ 40
2
10 ÷ 80
93 ÷ 48
0.75
20 ÷ 120
39 ÷ 12
1
20 ÷ 120
52 ÷ 16
1.5
20 ÷ 120
65 ÷ 20
2
20 ÷ 120
78 ÷ 24
1.5
40 ÷ 180
39 ÷ 9
2
40 ÷ 180
51 ÷ 12
PORT of delivery
1¼"
1¼"
1¼"
PRICE € Single-ph. Three-ph. 350.00 365.00 360.00 375.00 370.00 385.00 395.00 405.00 415.00 415.00 360.00 375.00 370.00 385.00 395.00 405.00 415.00 415.00 395.00 405.00 415.00 415.00
20 m long power cable (DRINCABLE® type approved for use in drinking water by “WRAS” in compliance with BS 6920, approval n. 7513) Impellers: Noryl Two mechanical seals separated by an oil chamber Windings with built-in thermal overload protector
Patent n. EP14755156.8 Patent Pending n° BO2015A000116 Patent n. EP2419642
SUPPORT KIT FOR HORIZONTAL OPERATION PRICE €
CODE
70.00
ASSKITUPFO
22
Price List 50
MULTI-STAGE SUBMERSIBLE PUMPS
NK-GE
Submersible pumps with �oat switch
MODEL Single-phase NKm 2/2 GE-N NKm 2/3 GE-N NKm 2/4 GE-N NKm 2/5 GE-N NKm 2/6 GE-N NKm 4/3 GE-N NKm 4/4 GE-N NKm 4/5 GE-N NKm 4/6 GE-N NKm 8/3 GE-N NKm 8/4 GE-N
POWER P� kW HP 0.37
0.5
10 ÷ 80
32 ÷ 17
0.55
0.75
10 ÷ 80
46 ÷ 23
0.75
1
10 ÷ 80
61 ÷ 31
1.1
1.5
10 ÷ 80
79 ÷ 40
1.5
2
10 ÷ 80
93 ÷ 48
0.55
0.75
20 ÷ 120
39 ÷ 12
0.75
1
20 ÷ 120
52 ÷ 16
1.1
1.5
20 ÷ 120
65 ÷ 20
1.5
2
20 ÷ 120
78 ÷ 24
1.1
1.5
40 ÷ 180
39 ÷ 9
1.5
2
40 ÷ 180
51 ÷ 12
POWER P� kW HP
Single-phase Three-phase 0.37 NKm 2/2-N NK 2/2-N 0.55 NKm 2/3-N NK 2/3-N 0.75 NKm 2/4-N NK 2/4-N 1.1 NKm 2/5-N NK 2/5-N 1.5 NKm 2/6-N NK 2/6-N 0.55 NKm 4/3-N NK 4/3-N 0.75 NKm 4/4-N NK 4/4-N 1.1 NKm 4/5-N NK 4/5-N 1.5 NKm 4/6-N NK 4/6-N 1.1 NKm 8/3-N NK 8/3-N 1.5 NKm 8/4-N NK 8/4-N
1¼"
1¼"
1¼"
PRICE € Single-phase 390.00 400.00 420.00 435.00 470.00 400.00 420.00 435.00 470.00 435.00 470.00
Submersible pumps without �oat switch MODEL
PORT of delivery
20 m long power cable (DRINCABLE® type up to 1.1 kW approved for use in drinking water by “WRAS”in compliance with BS 6920, approval n. 7513)
NK
PERFORMANCE Q H l/min metres
PERFORMANCE Q H l/min metres
0.5
10 ÷ 80
32 ÷ 17
0.75
10 ÷ 80
46 ÷ 23
1
10 ÷ 80
61 ÷ 31
1.5
10 ÷ 80
79 ÷ 40
2
10 ÷ 80
93 ÷ 48
0.75
20 ÷ 120
39 ÷ 12
1
20 ÷ 120
52 ÷ 16
1.5
20 ÷ 120
65 ÷ 20
2
20 ÷ 120
78 ÷ 24
1.5
40 ÷ 180
39 ÷ 9
2
40 ÷ 180
51 ÷ 12
PORT of delivery
1¼"
1¼"
1¼"
PRICE € Single-ph. Three-ph. 380.00 395.00 390.00 405.00 410.00 425.00 425.00 435.00 460.00 460.00 390.00 405.00 410.00 425.00 425.00 435.00 460.00 460.00 425.00 435.00 460.00 460.00
20 m long power cable (DRINCABLE® type up to 1.1 kW approved for use in drinking water by “WRAS”in compliance with BS 6920, approval n. 7513)
Impellers: Noryl Two mechanical seals separated by an oil chamber Windings with built-in thermal overload protector Patent n. EP14755156.8 Patent n. EP2313658
23
Price List 50
4" SUBMERSIBLE PUMPS
DAVIS
Submersible pump with peripheral impeller
MODEL
PUMP DIAMETER
Single-phase DAVIS®
mm
POWER P� kW HP
PERFORMANCE Q H l/min metres
101
0.75
5 ÷ 50
1
68 ÷ 5
PORT of delivery
PRICE € Single-phase
1"
330.00
Power cable: supplied with 20 metre long power cable Impeller: brass Two mechanical seals separated by an oil chamber Capacitor and motor with built-in thermal overload protector Patent n. EP2300717 - EP2419642 Registered trade mark n. 0001552668
DAVIS® : Ready to fit monoblock stainless steel submersible pump. Supplied with capacitor and motor with
built-in motor protector. N.B. Suitable for clean water without sand.
4BLOCK
Monoblock submersible pumps POWER P� kW HP
PERFORMANCE Q H l/min metres
4BLOCKm 2/10
0.55
0.75
10 ÷ 60
65 ÷ 20
4BLOCKm 2/13
0.75
1
10 ÷ 60
85 ÷ 26
4BLOCKm 2/20
1.1
1.5
10 ÷ 60 125 ÷ 39
510.00
4BLOCKm 4/7
0.55
0.75 20 ÷ 100 44 ÷ 17
367.00
4BLOCKm 4/9
0.75
1
20 ÷ 100 56 ÷ 23
4BLOCKm 4/14
1.1
1.5
20 ÷ 100 88 ÷ 35
485.00
4BLOCKm 6/4
0.55
0.75 25 ÷ 150 26 ÷ 11
360.00
4BLOCKm 6/6
0.75
1
25 ÷ 150 38 ÷ 17
4BLOCKm 6/9
1.1
1.5
25 ÷ 150 58 ÷ 26
4BLOCKm 8/4
0.75
1
40 ÷ 200 26 ÷ 10
4BLOCKm 8/7
1.1
1.5
40 ÷ 200 46 ÷ 16
MODEL Single-phase
PORT of delivery
PRICE € Single-phase 378.00
1¼"
1¼"
1¼"
405.00
390.00
385.00 465.00
1¼"
377.00 453.00
Power cable: supplied with 20 metre power cable Two mechanical seals separated by an oil chamber Capacitor and motor with built-in thermal overload protector Patent n. EP2300717 - EP2419642
4BLOCK: Ready to fit monoblock stainless steel submersible pumps. Supplied with capacitor and motor
with built-in motor protector. Suitable for use in clear water wells with a maximum sand content of up to 150 g/m³.
24
Price List 50
4" SUBMERSIBLE SOLAR PUMPS
FLUID SOLAR MODEL
Solar pumps kit INPUT POWER P�
FLUID SOLAR 1/10 FLUID SOLAR 1/20 FLUID SOLAR 2/6 FLUID SOLAR 2/14 FLUID SOLAR 4/4 FLUID SOLAR 4/8 FLUID SOLAR 6/3 FLUID SOLAR 6/6
MAXIMUM PERFORMANCE* Q H l/min metres 5 ÷ 38 79 ÷ 12 5 ÷ 38 165 ÷ 35 5 ÷ 75 64 ÷ 12 5 ÷ 75 140 ÷ 20 5 ÷ 102 38.5 ÷ 12 5 ÷ 120 85 ÷ 24 5 ÷ 150 30 ÷ 9 5 ÷ 180 65 ÷ 18
750 W 1500 W 750 W 1500 W 750 W 1500 W 750 W 1500 W
PRICE
PORT of delivery
€ 1,380.00 1,750.00 1,330.00 1,700.00 1,330.00 1,700.00 1,330.00 1,700.00
1"
1¼"
* Performance with: – solar radiation of 1000 W/m�; – available voltage of the photovoltaic panels 100 V DC ; – photovoltaic panels facing SOUTH (facing NORTH for installations in the southern hemisphere) and optimised angle of inclination to the horizon according to the latitude of the installation site. COMPONENTS Pump with 2 metre long power cable Control Unit (1) RPS2 electrical cable resin joint (2) N. 2 male connectors type SMK (3) N. 2 female connectors type SMK (4) N. 2 Y female/male-male connectors type MC4 (5) (only for FLUID SOLAR with P�=1500 W) N. 2 Y male/female-female connectors type MC4 (6) (only for FLUID SOLAR with P�=1500 W) Patent n. 0001413386, EP2419642 Patent n. EP2300717
(1)
(2)
(3)
(4)
(5)
(6)
Registered trade mark n. 0001516301
Cables for photovoltaic solar system MODEL FG21M21
CODE
1 x4 1 x4 1 x6 1 x6
117SF104R 117SF104N 117SF106R 117SF106N
mm² mm² mm² mm²
Red color Black color Red color Black color
WEIGHT PER METRE
PRICE €
0.060 kg 0.060 kg 0.080 kg 0.080 kg
2.70 by metre 2.70 » 3.20 » 3.20 »
These cables should be used to connect the pump to the control unit and to connect the control unit to the photovoltaic modules according to the diagram in the installation manual The 1x4 mm� cables are to be used up to a maximum length of 40 metres The 1x6 mm� cables are to be used up to a maximum length of 70 metres
Photovoltaic modules MODEL PANASONIC
CODE mod. VBHN240SJ25
538MF001
QUANTITY
PRICE €
n° 4 modules n° 8 modules
2,820.00 5,640.00
To run FLUID SOLAR at P1=750 W n. 4 photovoltaic modules are required. To run FLUID SOLAR at P1=1500 W n. 8 photovoltaic modules are required. No load voltage of each module 50 V DC . The total rated power of the four photovoltaic modules is 980 Wp The total rated power of the eight photovoltaic modules is 1960 Wp Original HIT® high efficiency photovoltaic modules (PANASONIC patent)
25
Price List 50
4" SUBMERSIBLE PUMPS
4SR-PD
Pumps with 4PD submersible motors*
MODEL Single-phase
4SR1 Best efficiency point: 1 m³/h
4SR1.5 Best efficiency point: 1.5 m³/h
4SR2 Best efficiency point: 2 m³/h
4SR4
Best efficiency point: 4 m³/h
4SR6
Best efficiency point: 6 m³/h
4SR8
Best efficiency point: 8 m³/h
Three-phase
POWER
PERFORMANCE
P� kW HP
Q l/min
H metres
4SR1m/13 - PD 4SR1m/18 - PD 4SR1m/25 - PD 4SR1m/35 - PD 4SR1m/45 - PD
4SR1/13 - PD 4SR1/18 - PD 4SR1/25 - PD 4SR1/35 - PD 4SR1/45 - PD
0.37 0.50 0.55 0.75 0.75 1 1.1 1.5 1.5 2
5 ÷ 30 5 ÷ 30 5 ÷ 30 5 ÷ 30 5 ÷ 30
73 ÷ 26 101 ÷ 36 140 ÷ 50 197 ÷ 70 254 ÷ 90
4SR1.5m/8 - PD 4SR1.5m/13 - PD 4SR1.5m/17 - PD 4SR1.5m/25 - PD 4SR1.5m/32 - PD 4SR1.5m/46 - PD
4SR1.5/8 - PD 4SR1.5/13 - PD 4SR1.5/17 - PD 4SR1.5/25 - PD 4SR1.5/32 - PD 4SR1.5/46 - PD
0.37 0.50 0.55 0.75 0.75 1 1.1 1.5 1.5 2 2.2 3
5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45
48 ÷ 14 78 ÷ 23 102 ÷ 30 151 ÷ 45 193 ÷ 58 277 ÷ 83
4SR2m/7 - PD 4SR2m/10 - PD 4SR2m/13 - PD 4SR2m/20 - PD 4SR2m/27 - PD 4SR2m/39 - PD
4SR2/7 - PD 4SR2/10 - PD 4SR2/13 - PD 4SR2/20 - PD 4SR2/27 - PD 4SR2/39 - PD
0.37 0.50 10 ÷ 60 0.55 0.75 10 ÷ 60 0.75 1 10 ÷ 60 1.1 1.5 10 ÷ 60 1.5 2 10 ÷ 60 2.2 3 10 ÷ 60
46 ÷ 14 68 ÷ 20 88 ÷ 26 130 ÷ 39 173 ÷ 52 250 ÷ 75
4SR4m/7 - PD 4SR4m/9 - PD 4SR4m/14 - PD 4SR4m/18 - PD 4SR4m/26 - PD – – –
4SR4/7 - PD 4SR4/9 - PD 4SR4/14 - PD 4SR4/18 - PD 4SR4/26 - PD 4SR4/35 - PD 4SR4/46 - PD 4SR4/60 - PD
0.55 0.75 1.1 1.5 2.2 3 4 5.5
0.75 1 1.5 2 3 4 5.5 7.5
20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100
44 ÷ 17 56 ÷ 23 88 ÷ 35 112 ÷ 45 162 ÷ 63 220 ÷ 85 293 ÷ 117 385 ÷ 155
4SR6m/4 - PD 4SR6m/6 - PD 4SR6m/9 - PD 4SR6m/13 - PD 4SR6m/17 - PD – – – –
4SR6/4 - PD 4SR6/6 - PD 4SR6/9 - PD 4SR6/13 - PD 4SR6/17 - PD 4SR6/23 - PD 4SR6/31 - PD 4SR6/42 - PD 4SR6/56 - PD
0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5
0.75 1 1.5 2 3 4 5.5 7.5 10
25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150
26 ÷ 11 38 ÷ 17 58 ÷ 26 83 ÷ 35 107 ÷ 45 148 ÷ 67 200 ÷ 86 276 ÷ 124 365 ÷ 173
4SR8m/4 - PD 4SR8m/7 - PD 4SR8m/9 - PD 4SR8m/13 - PD – – – –
4SR8/4 - PD 4SR8/7 - PD 4SR8/9 - PD 4SR8/13 - PD 4SR8/17 - PD 4SR8/23 - PD 4SR8/31 - PD 4SR8/42 - PD
0.75 1 40 ÷ 200 26 ÷ 10 1.1 1.5 40 ÷ 200 46 ÷ 16 1.5 2 40 ÷ 200 58 ÷ 21 2.2 3 40 ÷ 200 85 ÷ 30 3 4 40 ÷ 200 110 ÷ 40 4 5.5 40 ÷ 200 150 ÷ 53 5.5 7.5 40 ÷ 200 200 ÷ 72 7.5 10 40 ÷ 200 272 ÷ 98
26
PRICE of € delivery Single-ph. Three-ph. PORT
1¼"
365.00 407.00 460.00 539.00 694.00
365.00 407.00 455.00 529.00 669.00
1¼"
343.00 370.00 413.00 475.00 555.00 852.00
343.00 370.00 408.00 465.00 530.00 815.00
1¼"
343.00 358.00 381.00 443.00 514.00 638.00
343.00 358.00 376.00 433.00 489.00 601.00
1¼"
348.00 369.00 406.00 473.00 571.00 – – –
348.00 364.00 396.00 448.00 534.00 687.00 1,050.00 1,261.00
2"
343.00 362.00 396.00 463.00 550.00 – – – –
343.00 357.00 386.00 438.00 513.00 654.00 858.00 1,088.00 1,400.00
2"
354.00 384.00 426.00 511.00 – – – –
349.00 374.00 401.00 474.00 585.00 788.00 956.00 1,155.00
Price List 50
4" SUBMERSIBLE PUMPS
4SR-PD
Pumps with 4PD submersible motors*
MODEL Single-phase
4SR10 Best efficiency point: 10 m³/h
4SR12 Best efficiency point: 12 m³/h
4SR15
Three-phase
POWER
PERFORMANCE
P� kW HP
Q l/min
H metres
4SR10m/6 N -PD 4SR10m/8 N -PD 4SR10m/11 N -PD 4SR10m/16 N -PD – – –
4SR10/6 N -PD 4SR10/8 N -PD 4SR10/11 N -PD 4SR10/16 N -PD 4SR10/22 N -PD 4SR10/30 N -PD 4SR10/41 N -PD
0.75 1 50 ÷ 250 29 ÷ 4 1.1 1.5 50 ÷ 250 39 ÷ 6 1.5 2 50 ÷ 250 54 ÷ 8 2.2 3 50 ÷ 250 78 ÷ 12 3 4 50 ÷ 250 107 ÷ 17 4 5.5 50 ÷ 250 146 ÷ 22 5.5 7.5 50 ÷ 250 200 ÷ 31
4SR12m/5 N -PD 4SR12m/7 N -PD 4SR12m/9 N -PD 4SR12m/14 N -PD – – –
4SR12/5 N -PD 4SR12/7 N -PD 4SR12/9 N -PD 4SR12/14 N -PD 4SR12/19 N -PD 4SR12/25 N -PD 4SR12/34 N -PD
0.75 1 50 ÷ 300 25 ÷ 5 1.1 1.5 50 ÷ 300 35 ÷ 7 1.5 2 50 ÷ 300 45 ÷ 9 2.2 3 50 ÷ 300 70 ÷ 14 3 4 50 ÷ 300 95 ÷ 19 4 5.5 50 ÷ 300 125 ÷ 25 5.5 7.5 50 ÷ 300 170 ÷ 34
4SR15m/6 4SR15m/8
4SR15/6 4SR15/8 4SR15/12 4SR15/16 4SR15/21 4SR15/29
1.1 1.5 2.2 3 4 5.5
N -PD N -PD
4SR15m/12 N -PD
– – –
Best efficiency point: 15 m³/h
N -PD N -PD N -PD N -PD N -PD N -PD
1.5 2 3 4 5.5 7.5
50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340
PRICE of € delivery Single-ph. Three-ph. PORT
30 ÷ 3.5 40 ÷ 5 60 ÷ 7 80 ÷ 10 105 ÷ 12.5 145 ÷ 17
2"
469.00 542.00 634.00 814.00 – – –
464.00 532.00 609.00 777.00 1,037.00 1,345.00 1,687.00
2"
447.00 496.00 592.00 756.00 – – –
442.00 486.00 567.00 719.00 934.00 1,233.00 1,541.00
2"
484.00 572.00 702.00 – – –
474.00 547.00 665.00 864.00 1,145.00 1,419.00
* 4PD = oil filled rewindable motor Capacitor: INCLUDED IN THE PRICE of the single phase motor Power cable: 1.7 m for power from 0.37 to 3 kW, 2.7 m for power from 4 to 7.5 kW Patent n. EP2419642
4SR : suitable for pumping clean water with a maximum sand content of up to 150 g/m³)
Cooling sleeves for 4" submersible pumps COMPONENTS 1~ 3~ – Cooling sleeve with filter – Motor spacer – Gasket – N. 2 supports for horizontal installation – N. 3 clamps Cooling sleeve
MOTOR (P�) kW
CODE HP
0.37
0.50
0.55
0.75
0.75
1
1.1
1.5
1.5
2
2.2
3
3
4
4
5.5
5.5
7.5
7.5
10
Supports
27
PRICE €
ASSKIT4SRCR2
145.00
ASSKIT4SRCR3
150.00
ASSKIT4SRCR4
165.00
Price List 50
4" SUBMERSIBLE PUMPS
4SR-PS
Pumps with 4PS submersible motors*
MODEL Single-phase
4SR1 Best efficiency point: 1 m³/h
4SR1.5 Best efficiency point: 1.5 m³/h
4SR2 Best efficiency point: 2 m³/h
4SR4
Best efficiency point: 4 m³/h
4SR6
Best efficiency point: 6 m³/h
4SR8
Best efficiency point: 8 m³/h
Three-phase
POWER
PERFORMANCE
P� kW HP
Q l/min
H metres
4SR1m/13 - PS 4SR1m/18 - PS 4SR1m/25 - PS 4SR1m/35 - PS 4SR1m/45 - PS
4SR1/13 - PS 4SR1/18 - PS 4SR1/25 - PS 4SR1/35 - PS 4SR1/45 - PS
0.37 0.50 0.55 0.75 0.75 1 1.1 1.5 1.5 2
5 ÷ 30 5 ÷ 30 5 ÷ 30 5 ÷ 30 5 ÷ 30
73 ÷ 26 101 ÷ 36 140 ÷ 50 197 ÷ 70 254 ÷ 90
4SR1.5m/8 - PS 4SR1.5m/13 - PS 4SR1.5m/17 - PS 4SR1.5m/25 - PS 4SR1.5m/32 - PS 4SR1.5m/46 - PS
4SR1.5/8 - PS 4SR1.5/13 - PS 4SR1.5/17 - PS 4SR1.5/25 - PS 4SR1.5/32 - PS 4SR1.5/46 - PS
0.37 0.50 0.55 0.75 0.75 1 1.1 1.5 1.5 2 2.2 3
5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45 5 ÷ 45
48 ÷ 14 78 ÷ 23 102 ÷ 30 151 ÷ 45 193 ÷ 58 277 ÷ 83
4SR2m/7 - PS 4SR2m/10 - PS 4SR2m/13 - PS 4SR2m/20 - PS 4SR2m/27 - PS 4SR2m/39 - PS
4SR2/7 - PS 4SR2/10 - PS 4SR2/13 - PS 4SR2/20 - PS 4SR2/27 - PS 4SR2/39 - PS
0.37 0.50 10 ÷ 60 0.55 0.75 10 ÷ 60 0.75 1 10 ÷ 60 1.1 1.5 10 ÷ 60 1.5 2 10 ÷ 60 2.2 3 10 ÷ 60
46 ÷ 14 68 ÷ 20 88 ÷ 26 130 ÷ 39 173 ÷ 52 250 ÷ 75
4SR4m/7 - PS 4SR4m/9 - PS 4SR4m/14 - PS 4SR4m/18 - PS 4SR4m/26 - PS – – –
4SR4/7 - PS 4SR4/9 - PS 4SR4/14 - PS 4SR4/18 - PS 4SR4/26 - PS 4SR4/35 - PS 4SR4/46 - PS 4SR4/60 - PS
0.55 0.75 1.1 1.5 2.2 3 4 5.5
0.75 1 1.5 2 3 4 5.5 7.5
20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100 20 ÷ 100
44 ÷ 17 56 ÷ 23 88 ÷ 35 112 ÷ 45 162 ÷ 63 220 ÷ 85 293 ÷ 117 385 ÷ 155
4SR6m/4 - PS 4SR6m/6 - PS 4SR6m/9 - PS 4SR6m/13 - PS 4SR6m/17 - PS – – – –
4SR6/4 - PS 4SR6/6 - PS 4SR6/9 - PS 4SR6/13 - PS 4SR6/17 - PS 4SR6/23 - PS 4SR6/31 - PS 4SR6/42 - PS 4SR6/56 - PS
0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5
0.75 1 1.5 2 3 4 5.5 7.5 10
25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150 25 ÷ 150
26 ÷ 11 38 ÷ 17 58 ÷ 26 83 ÷ 35 107 ÷ 45 148 ÷ 67 200 ÷ 86 276 ÷ 124 365 ÷ 173
4SR8m/4 - PS 4SR8m/7 - PS 4SR8m/9 - PS 4SR8m/13 - PS – – – –
4SR8/4 - PS 4SR8/7 - PS 4SR8/9 - PS 4SR8/13 - PS 4SR8/17 - PS 4SR8/23 - PS 4SR8/31 - PS 4SR8/42 - PS
0.75 1 40 ÷ 200 26 ÷ 10 1.1 1.5 40 ÷ 200 46 ÷ 16 1.5 2 40 ÷ 200 58 ÷ 21 2.2 3 40 ÷ 200 85 ÷ 30 3 4 40 ÷ 200 110 ÷ 40 4 5.5 40 ÷ 200 150 ÷ 53 5.5 7.5 40 ÷ 200 200 ÷ 72 7.5 10 40 ÷ 200 272 ÷ 98
28
PRICE of € delivery Single-ph. Three-ph. PORT
1¼"
409.00 465.00 519.00 617.00 803.00
409.00 465.00 511.00 600.00 762.00
1¼"
387.00 428.00 472.00 553.00 664.00 1,004.00
387.00 428.00 464.00 536.00 623.00 937.00
1¼"
387.00 416.00 440.00 521.00 623.00 790.00
387.00 416.00 432.00 504.00 582.00 723.00
1¼"
406.00 428.00 484.00 582.00 723.00 – – –
406.00 420.00 467.00 541.00 656.00 878.00 1,187.00 1,400.00
2"
401.00 421.00 474.00 572.00 702.00 – – – –
401.00 413.00 457.00 531.00 635.00 845.00 995.00 1,227.00 1,700.00
2"
413.00 462.00 535.00 663.00 – – – –
405.00 445.00 494.00 596.00 776.00 925.00 1,095.00 1,455.00
Price List 50
4" SUBMERSIBLE PUMPS
4SR-PS
Pumps with 4PS submersible motors* MODEL
Single-phase
4SR10 Best efficiency point: 10 m³/h
4SR12 Best efficiency point: 12 m³/h
4SR15
Three-phase
POWER
PERFORMANCE
P� kW HP
Q l/min
H metres
4SR10m/6 N -PS 4SR10m/8 N -PS 4SR10m/11 N -PS 4SR10m/16 N -PS – – –
4SR10/6 N -PS 4SR10/8 N -PS 4SR10/11 N -PS 4SR10/16 N -PS 4SR10/22 N -PS 4SR10/30 N -PS 4SR10/41 N -PS
0.75 1 50 ÷ 250 29 ÷ 4 1.1 1.5 50 ÷ 250 39 ÷ 6 1.5 2 50 ÷ 250 54 ÷ 8 2.2 3 50 ÷ 250 78 ÷ 12 3 4 50 ÷ 250 107 ÷ 17 4 5.5 50 ÷ 250 146 ÷ 22 5.5 7.5 50 ÷ 250 200 ÷ 31
4SR12m/5 N -PS 4SR12m/7 N -PS 4SR12m/9 N -PS 4SR12m/14 N -PS – – –
4SR12/5 N -PS 4SR12/7 N -PS 4SR12/9 N -PS 4SR12/14 N -PS 4SR12/19 N -PS 4SR12/25 N -PS 4SR12/34 N -PS
0.75 1 50 ÷ 300 25 ÷ 5 1.1 1.5 50 ÷ 300 35 ÷ 7 1.5 2 50 ÷ 300 45 ÷ 9 2.2 3 50 ÷ 300 70 ÷ 14 3 4 50 ÷ 300 95 ÷ 19 4 5.5 50 ÷ 300 125 ÷ 25 5.5 7.5 50 ÷ 300 170 ÷ 34
4SR15m/6 4SR15m/8
4SR15/6 4SR15/8 4SR15/12 4SR15/16 4SR15/21 4SR15/29
1.1 1.5 2.2 3 4 5.5
N -PS N -PS
4SR15m/12 N -PS
– – –
Best efficiency point: 15 m³/h
N -PS N -PS N -PS N -PS N -PS N -PS
1.5 2 3 4 5.5 7.5
50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340 50 ÷ 340
PRICE of € delivery Single-ph. Three-ph. PORT
30 ÷ 3.5 40 ÷ 5 60 ÷ 7 80 ÷ 10 105 ÷ 12.5 145 ÷ 17
2"
528.00 620.00 743.00 966.00 – – –
520.00 603.00 702.00 899.00 1,228.00 1,482.00 1,826.00
2"
506.00 574.00 701.00 908.00 – – –
498.00 557.00 660.00 841.00 1,125.00 1,370.00 1,680.00
2"
562.00 681.00 854.00 – – –
545.00 640.00 787.00 1,055.00 1,282.00 1,558.00
* 4PS = submersible motor encapsulated in water Capacitor: INCLUDED IN THE PRICE of the single-phase motor Power cable: 2 m for power from 0.37 to 3 kW, 3 m for power from 4 to 7.5 kW Patent n. EP2419642
4SR : suitable for pumping clean water with a maximum sand content of up to 150 g/m³)
Cooling sleeves for 4" submersible pumps COMPONENTS – Cooling sleeve with filter – Motor spacer – Gasket – N. 2 supports for horizontal installation – N. 3 clamps Cooling sleeve
Supports
MOTOR (P�) 1~ 3~ kW 0.37 0.55 0.75 1.1 1.1 1.5 2.2 2.2 3 4 5.5 7.5
29
CODE HP 0.50 0.75 1 1.5 1.5 2 3 3 4 5.5 7.5 10
PRICE €
ASSKIT4SRCR1
140.00
ASSKIT4SRCR2
145.00
ASSKIT4SRCR3
150.00
ASSKIT4SRCR4
165.00
Price List 50
4" SUBMERSIBLE PUMPS
4SR-HYD MODEL
4SR1-HYD Best efficiency point: 1 m³/h
4SR1.5-HYD Best efficiency point: 1.5 m³/h
4SR2-HYD
Best efficiency point: 2 m³/h
4SR4-HYD
Best efficiency point: 4 m³/h
4SR6-HYD
Best efficiency point: 6 m³/h
4" submersible pumps P� POWER REQUIRED
PERFORMANCE
PRICE
of delivery
€
kW
HP
Q l/min
4SR1/13 - HYD
0.37
0.50
5 ÷ 30
73 ÷ 26
192.00
4SR1/18 - HYD
0.55
0.75
5 ÷ 30
101 ÷ 36
229.00
4SR1/25 - HYD
0.75
1
5 ÷ 30
140 ÷ 50
4SR1/35 - HYD
1.1
1.5
5 ÷ 30
197 ÷ 70
335.00
4SR1/45 - HYD
1.5
2
5 ÷ 30
254 ÷ 90
460.00
4SR1.5/8 - HYD
0.37
0.50
5 ÷ 45
48 ÷ 14
170.00
4SR1.5/13 - HYD
0.55
0.75
5 ÷ 45
78 ÷ 23
192.00
4SR1.5/17 - HYD
0.75
1
5 ÷ 45
102 ÷ 30
4SR1.5/25 - HYD
1.1
1.5
5 ÷ 45
151 ÷ 45
4SR1.5/32 - HYD
1.5
2
5 ÷ 45
193 ÷ 58
321.00
4SR1.5/46 - HYD
2.2
3
5 ÷ 45
277 ÷ 83
570.00
4SR2/7 - HYD
0.37
0.50
10 ÷ 60
46 ÷ 14
170.00
4SR2/10 - HYD
0.55
0.75
10 ÷ 60
68 ÷ 20
180.00
4SR2/13 - HYD
0.75
1
10 ÷ 60
88 ÷ 26
4SR2/20 - HYD
1.1
1.5
10 ÷ 60
130 ÷ 39
4SR2/27 - HYD
1.5
2
10 ÷ 60
173 ÷ 52
280.00
4SR2/39 - HYD
2.2
3
10 ÷ 60
250 ÷ 75
356.00
4SR4/7 - HYD
0.55
0.75
20 ÷ 100
44 ÷ 17
170.00
4SR4/9 - HYD
0.75
1
20 ÷ 100
56 ÷ 23
180.00
4SR4/14 - HYD
1.1
1.5
20 ÷ 100
88 ÷ 35
202.00
4SR4/18 - HYD
1.5
2
20 ÷ 100
112 ÷ 45
4SR4/26 - HYD
2.2
3
20 ÷ 100
162 ÷ 63
4SR4/35 - HYD
3
4
20 ÷ 100
220 ÷ 85
368.00
4SR4/46 - HYD
4
5.5
20 ÷ 100 293 ÷ 117
597.00
4SR4/60 - HYD
5.5
7.5
20 ÷ 100 385 ÷ 155
710.00
4SR6/4 - HYD
0.55
0.75
25 ÷ 150
26 ÷ 11
165.00
4SR6/6 - HYD
0.75
1
25 ÷ 150
38 ÷ 17
173.00
4SR6/9 - HYD
1.1
1.5
25 ÷ 150
58 ÷ 26
192.00
4SR6/13 - HYD
1.5
2
25 ÷ 150
83 ÷ 35
229.00
4SR6/17 - HYD
2.2
3
25 ÷ 150
107 ÷ 45
4SR6/23 - HYD
3
4
25 ÷ 150
148 ÷ 67
335.00
4SR6/31 - HYD
4
5.5
25 ÷ 150
200 ÷ 86
405.00
4SR6/42 - HYD
5.5
7.5
25 ÷ 150 276 ÷ 124
537.00
4SR6/56 - HYD
7.5
10
25 ÷ 150 365 ÷ 173
782.00
30
H metres
PORT
1¼"
1¼"
1¼"
1¼"
2"
271.00
224.00 271.00
192.00 239.00
239.00 289.00
268.00
Price List 50
4" SUBMERSIBLE PUMPS
4SR-HYD MODEL
4SR8-HYD
Best efficiency point: 8 m³/h
4SR10-HYD
Best efficiency point: 10 m³/h
4SR12-HYD
Best efficiency point: 12 m³/h
4SR15-HYD Best efficiency point: 15 m³/h
4" submersible pumps P� POWER REQUIRED
PERFORMANCE H metres
PORT
PRICE
of delivery
€
kW
HP
Q l/min
4SR8/4 - HYD
0.75
1
40 ÷ 200
26 ÷ 10
165.00
4SR8/7 - HYD
1.1
1.5
40 ÷ 200
46 ÷ 16
180.00
4SR8/9 - HYD
1.5
2
40 ÷ 200
58 ÷ 21
192.00
4SR8/13 - HYD
2.2
3
40 ÷ 200
85 ÷ 30
4SR8/17 - HYD
3
4
40 ÷ 200
110 ÷ 40
4SR8/23 - HYD
4
5.5
40 ÷ 200
150 ÷ 53
335.00
4SR8/31 - HYD
5.5
7.5
40 ÷ 200
200 ÷ 72
405.00
4SR8/42 - HYD
7.5
10
40 ÷ 200
272 ÷ 98
537.00
4SR10/6 N-HYD
0.75
1
50 ÷ 250
29 ÷ 4
280.00
4SR10/8 N-HYD
1.1
1.5
50 ÷ 250
39 ÷ 6
338.00
4SR10/11 N-HYD
1.5
2
50 ÷ 250
54 ÷ 8
400.00
4SR10/16 N-HYD
2.2
3
50 ÷ 250
78 ÷ 12
4SR10/22 N-HYD
3
4
50 ÷ 250
107 ÷ 17
718.00
4SR10/30 N-HYD
4
5.5
50 ÷ 250
146 ÷ 22
892.00
4SR10/41 N-HYD
5.5
7.5
50 ÷ 250
200 ÷ 31
1,136.00
4SR12/5 N-HYD
0.75
1
50 ÷ 300
25 ÷ 5
258.00
4SR12/7 N-HYD
1.1
1.5
50 ÷ 300
35 ÷ 7
292.00
4SR12/9 N-HYD
1.5
2
50 ÷ 300
45 ÷ 9
358.00
4SR12/14 N-HYD
2.2
3
50 ÷ 300
70 ÷ 14
4SR12/19 N-HYD
3
4
50 ÷ 300
95 ÷ 19
615.00
4SR12/25 N-HYD
4
5.5
50 ÷ 300
125 ÷ 25
780.00
4SR12/34 N-HYD
5.5
7.5
50 ÷ 300
170 ÷ 34
990.00
4SR15/6 N-HYD
1.1
1.5
50 ÷ 340
30 ÷ 3.5
280.00
4SR15/8 N-HYD
1.5
2
50 ÷ 340
40 ÷ 5
338.00
4SR15/12 N-HYD
2.2
3
50 ÷ 340
60 ÷ 7
4SR15/16 N-HYD
3
4
50 ÷ 340
80 ÷ 10
4SR15/21 N-HYD
4
5.5
50 ÷ 340 105 ÷ 12.5
692.00
4SR15/29 N-HYD
5.5
7.5
50 ÷ 340
868.00
145 ÷ 17
2"
2"
2"
2"
229.00 266.00
532.00
474.00
420.00 545.00
Patent n. EP2419642
4SR -HYD: suitable for pumping clean water with a maximum sand content of up to 150 g/m³)
31
Price List 50
6" SUBMERSIBLE PUMPS
6SR-PD MODEL
Pumps with 6PD* submersible motors POWER P�
6SR12
Best efficiency point: 12 m³/h
6SR18
Best efficiency point: 18 m³/h
6SR27
Best efficiency point: 27 m³/h
PERFORMANCE
PORT
Q
H
of delivery
PRICE
Three-phase
kW
HP
l/min
metres
6SR12/8 - PD
4
5.5
50 ÷ 330
106 ÷ 32
1,543.00
6SR12/11 - PD
5.5
7.5
50 ÷ 330
146 ÷ 44
1,640.00
6SR12/15 - PD
7.5
10
50 ÷ 330
199 ÷ 60
1,775.00
6SR12/18 - PD
9.2
12.5
50 ÷ 330
239 ÷ 72
6SR12/21 - PD
11
15
50 ÷ 330
279 ÷ 84
2,005.00
6SR12/25 - PD
13
17.5
50 ÷ 330
331 ÷ 100
2,278.00
6SR12/28 - PD
15
20
50 ÷ 330
371 ÷ 112
2,330.00
6SR18/4 - PD
4
5.5
50 ÷ 450
53.8 ÷ 22
1,473.00
6SR18/6 - PD
5.5
7.5
50 ÷ 450
80.5 ÷ 32
1,555.00
6SR18/9 - PD
7.5
10
50 ÷ 450
121 ÷ 48
1,636.00
6SR18/11 - PD
9.2
12.5
50 ÷ 450
148 ÷ 59
1,755.00
6SR18/13 - PD
11
15
50 ÷ 450
175 ÷ 70
6SR18/15 - PD
13
17.5
50 ÷ 450
202 ÷ 80
2,095.00
6SR18/18 - PD
15
20
50 ÷ 450
242 ÷ 96
2,150.00
6SR18/22 - PD
18.5
25
50 ÷ 450
296 ÷ 118
2,435.00
6SR18/26 - PD
22
30
50 ÷ 450
350 ÷ 139
2,775.00
6SR27/4 - PD
4
5.5
100 ÷ 600
53 ÷ 18
1,483.00
6SR27/5 - PD
5.5
7.5
100 ÷ 600
66 ÷ 22
1,545.00
6SR27/7 - PD
7.5
10
100 ÷ 600
92 ÷ 31
1,618.00
6SR27/8 - PD
9.2
12.5
100 ÷ 600
106 ÷ 35
1,720.00
6SR27/10 - PD
11
15
100 ÷ 600
132 ÷ 44
6SR27/12 - PD
13
17.5
100 ÷ 600
159 ÷ 53
6SR27/14 - PD
15
20
100 ÷ 600
185 ÷ 62
2,110.00
6SR27/17 - PD
18.5
25
100 ÷ 600
224 ÷ 75
2,380.00
6SR27/20 - PD
22
30
100 ÷ 600
264 ÷ 88
2,705.00
6SR27/27 - PD
30
40
100 ÷ 600
356 ÷ 119
3,194.00
32
3"
3"
3"
€
1,915.00
1,865.00
1,790.00 2,065.00
Price List 50
6" SUBMERSIBLE PUMPS
6SR-PD
Pumps with 6PD* submersible motors
MODEL
POWER
PERFORMANCE
P�
Three-phase
6SR36
Best efficiency point: 36 m³/h
PORT
Q
H
of delivery
PRICE €
kW
HP
l/min
metres
6SR36/4 - PD
4
5.5
100 ÷ 800
45 ÷ 14
1,990.00
6SR36/6 - PD
5.5
7.5
100 ÷ 800
67 ÷ 20
2,185.00
6SR36/8 - PD
7.5
10
100 ÷ 800
89 ÷ 27
2,360.00
6SR36/10 - PD
9.2
12.5
100 ÷ 800
111 ÷ 34
2,585.00
6SR36/11 - PD
11
15
100 ÷ 800
123 ÷ 37
6SR36/13 - PD
13
17.5
100 ÷ 800
145 ÷ 44
3,050.00
6SR36/15 - PD
15
20
100 ÷ 800
167 ÷ 51
3,200.00
6SR36/19 - PD
18.5
25
100 ÷ 800
212 ÷ 65
3,700.00
6SR36/23 - PD
22
30
100 ÷ 800
256 ÷ 78
4,260.00
6SR44/3 - PD
4
5.5
200 ÷ 1000
33 ÷ 13
1,915.00
6SR44/4 - PD
5.5
7.5
200 ÷ 1000
44 ÷ 18
2,035.00
6SR44/5 - PD
7.5
10
200 ÷ 1000
54 ÷ 22
2,145.00
6SR44/6 - PD
9.2
12.5 200 ÷ 1000
65 ÷ 26
2,300.00
6SR44/8 - PD
11
6SR44/9 - PD
13
6SR44/11 - PD
15
20
200 ÷ 1000
120 ÷ 48
2,890.00
6SR44/13 - PD
18.5
25
200 ÷ 1000
141 ÷ 57
3,260.00
6SR44/16 - PD
22
30
200 ÷ 1000
174 ÷ 70
3,750.00
6SR44/21 - PD
30
40
200 ÷ 1000
228 ÷ 92
4,430.00
6SR44
Best efficiency point: 44 m³/h
15
200 ÷ 1000
87 ÷ 35
17.5 200 ÷ 1000
98 ÷ 39
3"
3"
2,690.00
2,480.00 2,745.00
* 6PD = oil filled rewindable motor
4 metre power cable: standard equipment
VARIATION AVAILABLE ON REQUEST Pumps with dual voltage 400/690 V (star/delta) motor from 11 kW to 30 kW
For models 6SR36 and 6SR44 the pump body is made of cast AISI 304 stainless steel 6SR: suitable for pumping clean water with a maximum sand content of up to 100 g/m³)
Cooling sleeves for 6" submersible pumps MOTOR (P�) kW HP 4 5.5
COMPONENTS – Cooling sleeve with filter – Motor spacer – Gasket – N. 2 supports for horizontal installation – N. 4 clamps Cooling sleeve
Supports
33
5.5
7.5
7.5
10
9.2
12.5
11
15
15
20
18.5
25
22
30
30
40
CODE
PRICE €
ASSKIT6SRCR1
350.00
ASSKIT6SRCR2
365.00
ASSKIT6SRCR3
390.00
Price List 50
6" SUBMERSIBLE PUMPS
6SR-HYD MODEL
6SR12-HYD
Best efficiency point: 12 m³/h
6SR18-HYD
Best efficiency point: 18 m³/h
6SR27-HYD
Best efficiency point: 27 m³/h
6" submersible pumps P� POWER REQUIRED
PERFORMANCE H metres
PORT
PRICE
of delivery
€
kW
HP
Q l/min
6SR12/8 - HYD
4
5.5
50 ÷ 330
106 ÷ 32
618.00
6SR12/11 - HYD
5.5
7.5
50 ÷ 330
146 ÷ 44
670.00
6SR12/15 - HYD
7.5
10
50 ÷ 330
199 ÷ 60
775.00
6SR12/18 - HYD
9.2
12.5
50 ÷ 330
239 ÷ 72
6SR12/21 - HYD
11
15
50 ÷ 330
279 ÷ 84
885.00
6SR12/25 - HYD
13
17.5
50 ÷ 330
331 ÷ 100
958.00
6SR12/28 - HYD
15
20
50 ÷ 330
371 ÷ 112
1,010.00
6SR18/4 - HYD
4
5.5
50 ÷ 450
53.8 ÷ 22
548.00
6SR18/6 - HYD
5.5
7.5
50 ÷ 450
80.5 ÷ 32
585.00
6SR18/9 - HYD
7.5
10
50 ÷ 450
121 ÷ 48
636.00
6SR18/11 - HYD
9.2
12.5
50 ÷ 450
148 ÷ 59
670.00
6SR18/13 - HYD
11
15
50 ÷ 450
175 ÷ 70
6SR18/15 - HYD
13
17.5
50 ÷ 450
202 ÷ 80
775.00
6SR18/18 - HYD
15
20
50 ÷ 450
242 ÷ 96
830.00
6SR18/22 - HYD
18.5
25
50 ÷ 450
296 ÷ 118
905.00
6SR18/26 - HYD
22
30
50 ÷ 450
350 ÷ 139
975.00
6SR27/4 - HYD
4
5.5
100 ÷ 600
53 ÷ 18
558.00
6SR27/5 - HYD
5.5
7.5
100 ÷ 600
66 ÷ 22
575.00
6SR27/7 - HYD
7.5
10
100 ÷ 600
92 ÷ 31
618.00
6SR27/8 - HYD
9.2
12.5
100 ÷ 600
106 ÷ 35
635.00
6SR27/10 - HYD
11
15
100 ÷ 600
132 ÷ 44
3"
3"
830.00
745.00
670.00 3"
6SR27/12 - HYD
13
17.5
100 ÷ 600
159 ÷ 53
745.00
6SR27/14 - HYD
15
20
100 ÷ 600
185 ÷ 62
790.00
6SR27/17 - HYD
18.5
25
100 ÷ 600
224 ÷ 75
850.00
6SR27/20 - HYD
22
30
100 ÷ 600
264 ÷ 88
905.00
6SR27/27 - HYD
30
40
100 ÷ 600
356 ÷ 119
1,064.00
34
Price List 50
6" SUBMERSIBLE PUMPS
6SR-HYD MODEL
6SR36-HYD
Best efficiency point: 36 m³/h
6SR44-HYD
6" submersible pumps P� POWER REQUIRED
PERFORMANCE
PRICE
of delivery
€
kW
HP
Q l/min
6SR36/4 - HYD
4
5.5
100 ÷ 800
45 ÷ 14
1,065.00
6SR36/6 - HYD
5.5
7.5
100 ÷ 800
67 ÷ 20
1,215.00
6SR36/8 - HYD
7.5
10
100 ÷ 800
89 ÷ 27
1,360.00
6SR36/10 - HYD
9.2
12.5
100 ÷ 800
111 ÷ 34
1,500.00
6SR36/11 - HYD
11
15
100 ÷ 800
123 ÷ 37
6SR36/13 - HYD
13
17.5
100 ÷ 800
145 ÷ 44
1,730.00
6SR36/15 - HYD
15
20
100 ÷ 800
167 ÷ 51
1,880.00
6SR36/19 - HYD
18.5
25
100 ÷ 800
212 ÷ 65
2,170.00
6SR36/23 - HYD
22
30
100 ÷ 800
256 ÷ 78
2,460.00
6SR44/3 - HYD
4
5.5
200 ÷ 1000
33 ÷ 13
990.00
6SR44/4 - HYD
5.5
7.5
200 ÷ 1000
44 ÷ 18
1,065.00
6SR44/5 - HYD
7.5
10
200 ÷ 1000
54 ÷ 22
1,145.00
6SR44/6 - HYD
9.2
12.5 200 ÷ 1000
65 ÷ 26
1,215.00
6SR44/8 - HYD
11
200 ÷ 1000
87 ÷ 35
1,360.00
6SR44/9 - HYD
13
17.5 200 ÷ 1000
98 ÷ 39
1,425.00
6SR44/11 - HYD
15
20
200 ÷ 1000
120 ÷ 48
1,570.00
6SR44/13 - HYD
18.5
25
200 ÷ 1000
141 ÷ 57
1,730.00
6SR44/16 - HYD
22
30
200 ÷ 1000
174 ÷ 70
1,950.00
6SR44/21 - HYD
30
40
200 ÷ 1000
228 ÷ 92
2,300.00
15
H metres
PORT
3"
1,570.00
3"
Best efficiency point: 44 m³/h
VARIATION AVAILABLE ON REQUEST
Pumps with double cable cover for coupling to dual voltage 400/690 V (star/delta) motors of 11 kW to 30 kW
+ 10%
For models 6SR36 and 6SR44 the pump body is made of cast AISI 304 stainless steel.
6SR-HYD: suitable for pumping clean water with a maximum sand content of up to 100 g/m³)
35
Price List 50
SUBMERSIBLE ELECTRIC MOTORS
4PD
4" submersible motors MODEL
POWER P�
PRICE € Single-phase Three-phase 173.00 173.00
230 V / 50 Hz
400 V / 50 Hz
Single-phase 4PDm / 0.50
Three-phase 4PD / 0.50
kW
HP
0.37
0.50
4PDm / 0.75
4PD / 0.75
0.55
0.75
178.00
178.00
4PDm / 1
4PD / 1
0.75
1
189.00
184.00
4PDm / 1.5
4PD / 1.5
1.1
1.5
204.00
194.00
4PDm / 2
4PD / 2
1.5
2
234.00
209.00
4PDm / 3
4PD / 3
2.2
3
282.00
245.00
–
4PD / 4
3
4
–
319.00
–
4PD / 5.5
4
5.5
–
453.00
–
4PD / 7.5
5.5
7.5
–
551.00
–
4PD / 10
7.5
10
–
618.00
Rewindable submersible motors in a non-toxic oil bath (suitable for use in the foods sector) Motor sleeve: AISI 316 stainless steel Shaft: "DUPLEX" stainless steel Power cable: 1.7 m for power from 0.37 to 3 kW, 2.7 m for power from 4 to 7.5 kW
CAPACITOR: INCLUDED IN THE PRICE OF THE SINGLE PHASE MOTOR
SACRIFICIAL ANODE FOR 4PD SUBMERSIBLE MOTORS MODEL
CODE
ANODE 4PD
ASS4PDA01
PRICE € 51.00
The sacrificial anode is made of a special "cadmium free" zinc-aluminium alloy, suitable for contact with
drinking water.
It can be easily attached to the bottom of the 4PD motors to protect them from corrosion in the presence of stray currents or particularly aggressive water, greatly increasing the life of the motor components.
36
Price List 50
SUBMERSIBLE ELECTRIC MOTORS
4PS
4" submersible motors MODEL
400 V / 50 Hz
Single-phase 4PSm / 0.50
Three-phase 4PS / 0.50
kW
HP
0.37
0.50
4PSm / 0.75
4PS / 0.75
0.55
0.75
236.00
236.00
4PSm / 1
4PS / 1
0.75
1
248.00
240.00
4PSm / 1.5
4PS / 1.5
1.1
1.5
282.00
265.00
4PSm / 2
4PS / 2
1.5
2
343.00
302.00
4PSm / 3
4PS / 3
2.2
3
434.00
367.00
–
4PS / 4
3
4
–
510.00
–
4PS / 5.5
4
5.5
–
590.00
–
4PS / 7.5
5.5
7.5
–
690.00
–
4PS / 10
7.5
10
–
918.00
Submersible motors encapsulated in water Motor sleeve: AISI 316 stainless steel Shaft: "DUPLEX" stainless steel Power cable: 2 m for power from 0.37 to 3 kW, 3 m for power from 4 to 7.5 kW
CAPACITOR: INCLUDED IN THE PRICE OF THE SINGLE PHASE MOTOR
6PD
P�
PRICE € Single-phase Three-phase 217.00 217.00
230 V / 50 Hz
POWER
6" submersible motors MODEL
POWER
400 V / 50 Hz
P�
PRICE
Three-phase
kW
HP
€
6PD / 5.5
4
5.5
925.00
6PD / 7.5
5.5
7.5
970.00
6PD / 10
7.5
10
1,000.00
6PD / 12.5
9.2
12.5
1,085.00
6PD / 15
11
15
1,120.00
6PD / 20
15
20
1,320.00
6PD / 25
18.5
25
1,530.00
6PD / 30
22
30
1,800.00
6PD / 40
30
40
2,130.00
Rewindable submersible motors in a non-toxic oil bath (suitable for use in the foods sector) Power cable: 4 metre long
37
Price List 50
SUBMERSIBLE MULTI-STAGE PUMPS
TOP MULTI
Multi-stage pumps
MODEL Single-phase TOP MULTI 2 TOP MULTI 3
POWER P� kW HP
PERFORMANCE Q H l/min metres
0.55
0.75
10 ÷ 80
40 ÷ 5
0.55
0.75
10 ÷ 120
32 ÷ 4
MODEL Single-phase TOP MULTI 2-EVO TOP MULTI 3-EVO
1¼"
Power cable: 10 metres standard equipment with Schuko plug Two mechanical seals separated by an oil chamber Impellers: Noryl Float switch Registered EU Design n. 000885587 TOP MULTI® Registered trade mark n. 0001334477
TOP MULTI-EVO
PORT of delivery
PRICE € Single-phase 237.00 247.00
for clean water
Multi-stage pumps
POWER P� kW HP
PERFORMANCE Q H l/min metres
0.55
0.75
10 ÷ 80
40 ÷ 5
0.55
0.75
10 ÷ 120
32 ÷ 4
PORTS suct.
deliv.
1¼"
1¼"
Power cable: 10 metres standard equipment with Schuko plug Two mechanical seals separated by an oil chamber Impellers: Noryl Float switch TOP MULTI® Registered trade mark n. 0001334477
PRICE € Single-phase 250.00 265.00
for clean water
Version without �oat switch TOP MULTI 2-EVO
€ 245.00
Version without �oat switch TOP MULTI 3-EVO
€ 260.00
Standard equipment Pipe coupling threaded 1¼" complete with flap-check valve
Ø 35 mm hosetail fitting
KGE - Floating suction kit MODEL KGE
TOP MULTI®:
CODE
FITTING
ASSKITKGE
1¼"
PRICE € 65.00
KGE floating suction kit includes: – 1.5 metre long PVC hose (Ø 30 mm) – stainless steel suction filter – polyethylene spherical float – flexible hose fittings Ø 30 mm TOP MULTI-EVO with KGE kit for aspiration at about 10 cm below the water surface, preventing the suction of any floating waste or sediment on the bottom of the tank thus avoiding any damage to the pump
Suitable for use in applications such as clean water supply from reservoirs, tanks or relatively deep wells, for drawing rain water from cisterns, to water gardens by hand or to supply water to irrigation systems, etc.
38
Price List 50
SUBMERSIBLE MULTI-STAGE PUMPS
TOP MULTI-TECH MODEL Single-phase TOP MULTI-TECH 2 TOP MULTI-TECH 3
Automatic multi-stage pumps
POWER P� kW HP
PERFORMANCE Q H l/min metres
0.55
0.75
10 ÷ 80
40 ÷ 5
0.55
0.75
10 ÷ 120
32 ÷ 4
MODEL Single-phase TOP MULTI-EVOTECH 2 TOP MULTI-EVOTECH 3
1¼"
Power cable: 10 metres standard equipment with Schuko plug Two mechanical seals separated by an oil chamber Impellers: Noryl Patent n. EP2990653 TOP MULTI® Registered trade mark n. 0001334477
TOP MULTI-EVOTECH
PRICE € Single-phase 305.00 320.00
PORT of delivery
for clean water
Automatic multi-stage pumps
POWER P� kW HP
PERFORMANCE Q H l/min metres
0.55
0.75
10 ÷ 80
40 ÷ 5
0.55
0.75
10 ÷ 120
32 ÷ 4
PRICE € Single-phase 318.00 338.00
PORTS suct.
deliv.
1¼"
1¼"
Power cable: 10 metres standard equipment with Schuko plug Two mechanical seals separated by an oil chamber Impellers: Noryl Patent n. EP2990653 TOP MULTI® Registered trade mark n. 0001334477
for clean water
Spare electronic card (cod. 1145A001)
€ 48.00
Standard equipment Nipple 1¼"
Ø 35 mm hosetail fitting
1 SF - Tank – NT - 3 way fitting
1SF NT 1.25
MODEL
CODE
FITTING
CAPACITY
PRE-SET
MAXIMUM WORKING PRESSURE
1 SF NT 1.25
500667
½" (male)
1 litre
1.2 bar
10 bar
1¼"- 1¼" - ½" gas
–
–
–
500160001
PRICE € 32.00 4.80
TYPICAL INSTALLATION t h g i e h y r e v i l m e 0 1 d m u m i x a M
NT
To operate correctly avoiding frequent restarts and for greater energy saving it is necessary to install the 1 SF tank (or a similar tank with a minimum capacity of 1 litre) with an initial load of 1.2 bar
1SF
The TOP MULTI-TECH pumps are fitted with an internal electronic device which starts the pump when the pressure of the system falls below 1.5 bar (eg. when opening a tap) and stops it when the flow falls below 3 litres per minute. It protects the pump against dry running and against blockage: after long periods of inactivity the electronic device starts the pump every 48 hours for 10 seconds.
39
Price List 50
SUBMERSIBLE PUMPS
TOP
Drainage pumps for clear water
MODEL Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
TOP 1
0.25
0.33
20 ÷ 160
6÷1
TOP 2
0.37
0.50
20 ÷ 220
8÷1
TOP 3
0.55
0.75
20 ÷ 260
10 ÷ 2
TOP 4 N
0.75
1
20 ÷ 320
12.5 ÷ 3
TOP 5 N
0.92
1.25
20 ÷ 360
15 ÷ 2.5
PORT of delivery
1¼"
1½"
HOSETAIL FITTING
PRICE
mm
€
Ø 25
126.00
Ø 35
Ø 41
131.00 153.00 247.00 257.00
Power cable: – 5 metres standard equipment with Schuko plug – 10 metres standard equipment with Schuko plug for TOP 4-5 Two mechanical seals separated by an oil chamber for TOP 4-5 External float switch: standard issue Shaft: AISI 431 stainless steel (TOP 4-5) Patent Pending n° BO2015A000116 Registered EU Design n. 342159-0 011
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For the TOP 1-2-3 with a 10 metre long power cable, add
VERSION WITH MAGNETIC FLOAT SWITCH
Single-phase
POWER P� kW HP
TOP 1 - GM
0.25
0.33
20 ÷ 160
6÷1
TOP 2 - GM
0.37
0.50
20 ÷ 220
8÷1
TOP 3 - GM
0.55
0.75
20 ÷ 260
10 ÷ 2
TOP 4 N - GM
0.75
1
20 ÷ 320
12.5 ÷ 3
TOP 5 N - GM
0.92
1.25
20 ÷ 360
15 ÷ 2.5
MODEL
PERFORMANCE Q H l/min metres
PORT of delivery
1¼"
1½"
HOSETAIL FITTING
PRICE
mm
€
Ø 25
147.00
Ø 35
Ø 41
153.00 176.00 268.00 278.00
Power cable: – 5 metres standard equipment with Schuko plug – 10 metres standard equipment with Schuko plug for TOP 4-5 GM Two mechanical seals separated by an oil chamber for TOP 4-5 GM External float switch: standard issue Shaft: AISI 431 stainless steel (TOP 4-5 GM) Registered EU Design n. 342159-0 011
SUITABLE FOR SMALL DRAINAGE TRAPS
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For the model with a 10 metre long power cable, add
VERSIONS SUITABLE FOR AGGRESSIVE LIQUIDS MODEL Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
TOP 2 - LA
0.37
0.50
20 ÷ 220
8÷1
TOP 3 - LA
0.55
0.75
20 ÷ 260
10 ÷ 2
PORT of delivery
HOSETAIL FITTING
PRICE
mm
€
1¼"
Ø 35
186.00 207.00
Power cable: 10 metres standard equipment with Schuko plug External float switch: standard issue Patent Pending n° BO2015A000116 Registered EU Design n. 342159-0011
TOP-LA: metallic components in contact with the pumped liquid in AISI 316 stainless steel
40
Price List 50
SUBMERSIBLE PUMPS
TOP-FLOOR MODEL
Low suction pumps for clear water
Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
TOP 1 - FLOOR
0.25
0.33
20 ÷ 120
6÷1
TOP 2 - FLOOR
0.37
0.50
20 ÷ 160
8÷1
PORT of delivery
HOSETAIL FITTING
PRICE
mm
€
Ø 25
126.00
Ø 35
131.00
1¼"
Power cable: 5 metres standard equipment with Schuko plug Registered EU Design n. 342159-0 011
The pump is designed so as to guarantee suction down to 2 mm above ground level
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with an external �oat switch, add
€ 13.50
For the model with a 10 metre long power cable, add
€ 13.50
TOP-VORTEX MODEL Single-phase
Pumps for dirty water
POWER P� kW HP
PERFORMANCE Q H l/min metres
TOP 2 - VORTEX
0.37
0.50
20 ÷ 180 6.5 ÷ 1.5
TOP 3 - VORTEX
0.55
0.75
20 ÷ 180
8 ÷ 2.5
PORT PASSAGE of of solids delivery mm 1¼"
Ø 20
HOSETAIL FITTING
PRICE
mm
€
Ø 35
142.00 164.00
Power cable: 5 metres standard equipment with Schuko plug External float switch: standard issue Patent Pending n° BO2015A000116 Registered EU Design n. 342159-0 011
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For the model with a 10 metre long power cable, add
VERSION WITH MAGNETIC FLOAT SWITCH MODEL Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
TOP 2 - VORTEX / GM
0.37
0.50
20 ÷ 180 6.5 ÷ 1.5
TOP 3 - VORTEX/ GM
0.55
0.75
20 ÷ 180
8 ÷ 2.5
PORT PASSAGE of of solids delivery mm 1¼"
Ø 20
HOSETAIL FITTING
PRICE
mm
€
Ø 35
164.00 186.00
Power cable: 5 metres standard equipment with Schuko plug External float switch: standard issue Registered EU Design n. 342159-0011
SUITABLE FOR SMALL DRAINAGE TRAPS
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with a 10 metre long power cable, add
41
€ 13.50
Price List 50
STAINLESS STEEL DRAINAGE PUMPS
RX
Pumps for clear water MODEL
Single-phase Three-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
RXm 1
RX 1
0.25
0.33
20 ÷ 160
6.5 ÷ 1
RXm 2
RX 2
0.37
0.50
20 ÷ 220
9.5 ÷ 2
RXm 3
RX 3
0.55
0.75
20 ÷ 220
11.5 ÷ 3
RXm 4
RX 4
0.75
1
20 ÷ 260
15 ÷ 4
RXm 5
RX 5
1.1
1.5
20 ÷ 300
19.5 ÷ 5
PORT PRICE of € delivery Single-phase Three-phase
1¼"
1½"
168.00
183.00
174.00
189.00
197.00
212.00
525.00
535.00
548.00
548.00
Power cable: – 5 metres standard equipment with Schuko plug in single-phase versions – 10 metres standard equipment for RX 4-5, with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber for RX 4-5 External float switch: standard issue on single-phase versions Impeller: AISI 304 stainless steel Shaft: AISI 431 stainless steel (RX4-5) Patent n. EP2313658 Patent Pending n° BO2015A000116
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For RX 1-2-3 with a 10 metre long power cable, add
VERSION WITH MAGNETIC FLOAT SWITCH MODEL Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
RXm1 - GM
0.25
0.33
20 ÷ 160
6.5 ÷ 1
RXm 2 - GM
0.37
0.50
20 ÷ 220
9.5 ÷ 2
RXm 3 - GM
0.55
0.75
20 ÷ 220
11.5 ÷ 3
RXm 4 - GM
0.75
1
20 ÷ 260
15 ÷ 4
RXm 5 - GM
1.1
1.5
20 ÷ 300
19.5 ÷ 5
PORT of delivery
PRICE € 184.00
1¼"
191.00 213.00
1½"
546.00 569.00
Power cable: – 5 metres standard equipment with Schuko plug in single-phase versions – 10 metres standard equipment for RX 4-5 GM, with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber for RX 4-5 GM External float switch: standard issue Impeller: AISI 304 stainless steel Shaft: AISI 431 stainless steel (RX 4-5 GM) Patent n. EP2313658
SUITABLE FOR SMALL DRAINAGE TRAPS
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with a 10 metre long power cable, add
42
€ 13.50
Price List 50
STAINLESS STEEL DRAINAGE PUMPS
RX-VORTEX MODEL Single-phase Three-phase
Pumps for dirty water POWER P� kW HP
PERFORMANCE Q H l/min metres
RXm 2/20
RX 2/20
0.37
0.50 20 ÷ 180 6.5 ÷ 2
RXm 3/20
RX 3/20
0.55
0.75 20 ÷ 180
RXm 4/40
RX 4/40
0.75
1
20 ÷ 280 9.5 ÷ 2
RXm 5/40
RX 5/40
1.1
1.5
20 ÷ 380 12.5 ÷ 2
8÷3
PORT PASSAGE of of solids delivery mm 1¼"
Ø 20
1½"
Ø 40
PRICE € Single-phase Three-phase 186.00
201.00
208.00
223.00
548.00
548.00
570.00
570.00
Power cable: – 5 metres standard equipment with Schuko plug in single-phase versions – 10 metres standard equipment for RX 4-5/40, with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber for RX 4-5/40 External float switch: standard issue on single-phase versions Impeller: VORTEX AISI 304 stainless steel Shaft: AISI 431 stainless steel (RX 4-5/40) Patent n. EP2313658 Patent Pending n° BO2015A000116
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For RX 2-3/20 with a 10 metre long power cable, add
VERSION WITH MAGNETIC FLOAT SWITCH MODEL
Single-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
RXm 2/20 - GM
0.37
0.50 20 ÷ 180 6.5 ÷ 2
RXm 3/20 - GM
0.55
0.75 20 ÷ 180
RXm 4/40 - GM
0.75
1
20 ÷ 280 9.5 ÷ 2
RXm 5/40 - GM
1.1
1.5
20 ÷ 380 12.5 ÷ 2
8÷3
PORT PASSAGE of of solids delivery mm 1¼"
Ø 20
1½"
Ø 40
PRICE € 208.00 230.00 570.00 592.00
Power cable: – 5 metres standard equipment with Schuko plug – 10 metres standard equipment for RX 4-5/40 GM, with Schuko plug Two mechanical seals separated by an oil chamber for RX 4-5/40 GM External float switch: standard issue Impeller: VORTEX AISI 304 stainless steel Shaft: AISI 431 stainless steel (RX 4-5/40 GM) Patent n. EP2313658
SUITABLE FOR SMALL DRAINAGE TRAPS
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with a 10 metre long power cable, add
43
€ 13.50
Price List 50
SUBMERSIBLE STAINLESS STEEL PUMPS
(PROFESSIONAL)
VX-ST Submersible "VORTEX" pumps for sewage water MODEL
Single-phase
Three-phase
POWER P� kW HP
VXm 8/35 -ST
VX 8/35 -ST
0.55
VXm 10/35 -ST
VX 10/35 -ST
0.75
1
VXm 15/35 -ST
VX 15/35 -ST
1.1
1.5
VXm 8/50 -ST
VX 8/50 -ST
0.55
VXm 10/50 -ST
VX 10/50 -ST
0.75
1
VXm 15/50 -ST
VX 15/50 -ST
1.1
1.5
PERFORMANCE Q H l/min metres
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Three-ph.
330.00
345.00
334.00
349.00
14 ÷ 2
379.00
379.00
0.75 50 ÷ 450 7 ÷ 1.5
340.00
355.00
344.00
359.00
389.00
389.00
0.75 50 ÷ 350 8.5 ÷ 1 50 ÷ 400 10.5 ÷ 2 50 ÷ 500
50 ÷ 550 9.5 ÷ 1.5 50 ÷ 650
1½"
2"
Ø 40
Ø 50
13 ÷ 2
Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Pump body: AISI 304 pressed stainless steel Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: AISI 304 stainless steel Shaft: AISI 431 stainless steel Patent n. EP2313658 Patent Pending n° BO2015A000116
+ 8%
Shaft in AISI 316L stainless steel available on request
SUBMERSIBLE STAINLESS STEEL PUMPS
BC-ST
Submersible "DOUBLE-CHANNEL" pumps for sewage water
Single-phase
Three-phase
POWER P� kW HP
BCm 10/50-ST
BC 10/50-ST
0.75
1
50 ÷ 600
11 ÷ 2
BCm 15/50-ST
BC 15/50-ST
1.1
1.5
50 ÷ 750
14 ÷ 2
MODEL
(PROFESSIONAL)
PERFORMANCE Q H l/min metres
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Three-ph. 2"
Ø 50
380.00
395.00
415.00
415.00
Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Pump body: AISI 304 pressed stainless steel Shaft: AISI 431 stainless steel Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Patent n. EP2313658 Patent Pending n° BO2015A000116
Shaft in AISI 316L stainless steel available on request
44
+ 8%
Price List 50
SUBMERSIBLE STAINLESS STAINLESS STEEL PUMPS
VX-MF
Submersible "VORTEX" pumps for sewage water
MODEL Singlee-p phase
Threee-p phase
POWER P� kW HP
VXm 8/35 -MF
VX 8/35 -MF
0.55
VXm 10/35 -MF
VX 10/35 -MF
0.75
1
VXm 15/35 -MF
VX 15/35 -MF
1.1
1.5
VXm 8/50 -MF
VX 8/50 -MF
0.55
VXm 10/50 -MF
VX 10/50 -MF
0.75
1
VXm 15/50 -MF
VX 15/50 -MF
1.1
1.5
PERFORMANCE Q H l/min metres
5 2 5 .0 0
515.00
5 3 0 .0 0
50 ÷ 500 13.5 ÷ 2
560.00
5 6 0 .0 0
0.75 50 ÷ 450 6 ÷ 1.5
515.00
5 3 0 .0 0
519.00
5 3 4 .0 0
565.00
5 6 5 .0 0
50 ÷ 400
8÷1 10 ÷ 2
50 ÷ 550 8.5 ÷ 1.5 50 ÷ 650
2"
Ø 40
Ø 50
11 ÷ 2
(PROFESSIONAL)
Submersible "DOUBLE-CHANNEL" pumps for sewage water
Singlee-p phase
Threee-p phase
POWER P� kW HP
BCm 10/50-MF
BC 10/50-MF
0.75
1
50 ÷ 600
11 ÷ 2
BCm 15/50-MF
BC 15/50-MF
1.1
1.5
50 ÷ 750
14 ÷ 2
MODEL
1½"
Pump body: cast AISI 304 stainless steel Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Shaft: AISI 316L stainless steel Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: AISI 304 stainless steel Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116
BC-MF
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Singleph. Th Threeree-ph. ph.
510.00
0.75 50 ÷ 350
SUBMERSIBLE STAINLESS STAINLESS STEEL PUMPS
(PROFESSIONAL)
PERFORMANCE Q H l/min metres
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Singleph. Th Threeree-ph. ph. 2"
Ø 50
560.00
5 7 5 .0 0
590.00
5 9 0 .0 0
Pump body: cast AISI 304 stainless steel Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Shaft: AISI 316L stainless steel Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116
45
Price List 50
SUBMERSIBLE DRAINAGE PUMPS
D
(PROFESSIONAL PROFESSIONAL))
Pumps for clear water MODEL
SingleSin gle-pha phase se Thr Three-p ee-phas hasee
POWER P� kW HP
PERFORMANCE Q H l/min metres
Dm 8 -N
D 8 -N
0.55
0.75
25 ÷ 250
12.5 ÷ 3
Dm 10-N
D 10 -N
0.75
1
25 ÷ 300
15.5 ÷ 3
PORT of deliver y
PRICE € Sin ingl glee-p pha hase se Thr hree ee-p -pha hase se 263.00
278.00
268.00
283.00
1½"
Dm 20-N
D 20 -N
0.75
1
25 ÷ 250
19 ÷ 8
279.00
294.00
Dm 30-N
D 30 -N
1.1
1.5
25 ÷ 275
26 ÷ 9
317.00
317.00
Power cable: – 5 metres standard equipment equipment with Schuko plug in single-phase versions – 10 metres standard equipment for D30-N with Schuko plug in single-phase versions Impeller: technopolymer Shaft: AISI 431 stainless steel Two mechanical seals separated by an oil chamber (For D30-N shaft with double mechanical seal with sealing ring) External float switch: standard issue on single-phase versions Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For the model with a 10 metre long power cable, add
SUBMERSIBLE PUMPS
ZX Submersible "VORTEX" pumps for dirty water MODEL Single-phase ZXm 1B/40
POWER P� kW HP 0.50
0.70
PERFORMANCE Q H l/min metres 25 ÷ 350
PORT PASSAGGIO of corpi solidi deliver y mm
50
0.60
0.85
25 ÷ 400
€ 240.00
8.5 ÷ 1 1½"
ZXm 1A/40
PRICE
Ø 40
10.5 ÷ 1.5
245.00
Power cable: 5 metres standard equipment with Schuko plug External float switch: standard issue Impeller: VORTEX technopolymer Hose fitting supplied as a standard
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with a 10 metre long power cable, add
46
€ 13.50
Price List 50
SUBMERSIBLE PUMPS
(PROFESSIONAL PROFESSIONAL))
VX Submersible "VORTEX" pumps for sewage water MODEL
POWER P� kW HP
Singlee-p phase
Threee-p phase
VXm 8/35 -N
VX 8/35 -N
0.55
VXm 10/35 -N
VX 10/35 -N
0.75
1
VXm 15/35 -N
VX 15/35 -N
1.1
1.5
VXm 8/50 -N
VX 8/50 -N
0.55
VXm 10/50 -N
VX 10/50 -N
0.75
1
VXm 15/50 -N
VX 15/50 -N
1.1
1.5
PERFORMANCE Q H l/min metres
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Singleph. Th Threeree-ph. ph.
274.00
2 8 9 .0 0
279.00
2 9 4 .0 0
50 ÷ 500 13.5 ÷ 2
328.00
3 2 8 .0 0
0.75 50 ÷ 450 6 ÷ 1.5
285.00
3 0 0 .0 0
289.00
3 0 4 .0 0
340.00
3 4 0 .0 0
0.75 50 ÷ 350 50 ÷ 400
8÷1 10 ÷ 2
50 ÷ 550 8.5 ÷ 1.5 50 ÷ 650
1½"
2"
Ø 40
Ø 50
11 ÷ 2
Power cable: – 5 metres standard equipment with Schuko plug in single-phase versions – 10 metres standard equipment for VX15/35-N, VX15/50-N with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: VORTEX AISI 304 stainless steel Shaft: AISI 431 stainless steel Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
€ 13.50
For the model with a 10 metre long power cable, add
SUBMERSIBLE PUMPS
(PROFESSIONAL PROFESSIONAL))
Submersible le "DOUBLE"DOUBLE-CHANNEL" CHANNEL" pumps for sewage water BC Submersib MODEL Singlee-p phase
Threee-p phase
BCm 10/50-N
BC 10/50-N
POWER P� kW HP 0.75
1
PERFORMANCE Q H l/min metres 50 ÷ 600
PORT PASSAGE PRICE of of solids € deliver y mm Single-ph. Singleph. Thr Three-p ee-ph. h.
11 ÷ 2 2"
BCm 15/50-N
BC 15/50-N
1.1
1.5
50 ÷ 750
3 1 7 .0 0
332.00
3 6 5 .0 0
365.00
Ø 50
14 ÷ 2
Power cable: – 5 metres standard equipment with Schuko plug in single-phase versions – 10 metres standard equipment for BC15/50-N with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: DOUBLE-CHANNEL AISI 304 precision cast stainless steel Shaft: AISI 431 stainless steel Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications For the model with a 10 metre long power cable, add
47
€ 13.50
Price List 50
CAST IRON SUBMERSIBLE PUMPS
VXC
Submersible "VORTEX" pumps for sewage water MODEL
(PROFESSIONAL)
Singlee-p phase
Threee-p phase
POWER P� kW HP
VXCm 8/35 -N
VXC 8/35 -N
0.55
VXCm 10/35 -N
VXC 10/35-N
0.75
1
VXCm 15/35 -N
VXC 15/35-N
1.1
1.5
VXCm 8/45 -N
VXC 8/45 -N
0.55
VXCm 10/45 -N
VXC 10/45-N
0.75
1
VXCm 15/45 -N
VXC 15/45-N
1.1
1.5
PERFORMANCE Q H l/min metres
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Singleph. Th Threeree-ph. ph.
3 1 8 .0 0
3 3 3 .0 0
3 2 2 .0 0
3 3 7 .0 0
50 ÷ 500 13.5 ÷ 2
3 7 5 .0 0
3 7 5 .0 0
0.75 50 ÷ 450 6 ÷ 1.5
3 2 3 .0 0
3 3 8 .0 0
3 2 8 .0 0
3 4 3 .0 0
3 8 0 .0 0
3 8 0 .0 0
0.75 50 ÷ 350 50 ÷ 400
8÷1 10 ÷ 2
50 ÷ 550 8.5 ÷ 1.5 50 ÷ 650
1½"
2"
11 ÷ 2
Submersible "DOUBLE-CHANNEL" pumps for sewage water MODEL
Singlee-p phase
Threee-p phase
POWER P� kW HP
MCm 10/45-N
MC 10/45-N
0.75
1
PERFORMANCE Q H l/min metres 50 ÷ 600
PORT PASSAGE PRICE of of solids € delivery mm Single-ph. Singleph. Th Threeree-ph. ph.
11 ÷ 2 2"
MCm 15/45-N
Ø 50
Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: VORTEX AISI 304 stainless steel Shaft: AISI 431 stainless steel Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116 Registered EU Design n. 002501486-0003
MC
Ø 40
MC 15/45-N
1.1
1.5
50 ÷ 750
14 ÷ 2
3 6 8 .0 0
3 8 3 .0 0
4 1 8 .0 0
4 1 8 .0 0
Ø 50
Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Two mechanical seals separated by an oil chamber External float switch: standard issue on single-phase versions Impeller: DOUBLE-CHANNEL AISI 304 precision cast stainless steel Shaft: AISI 431 stainless steel Patent n. EP2313658 n. EP2313658 Patent Pending n° BO2015A000116 Registered EU Design n. 002501486-0003
48
Price List 50
CAST IRON SUBMERSIBLE PUMPS
DC
(PROFESSIONAL)
Cast iron drainage pumps for clear water MODEL
POWER P� kW HP Single-phase Three-phase
PERFORMANCE Q H l/min metres
DCm 8 -N
DC 8 -N
0.55
0.75
25 ÷ 250
12.5 ÷ 3
DCm 10-N
DC 10-N
0.75
1
25 ÷ 300
15.5 ÷ 3
PORT PRICE of € delivery Single-ph. Three-ph.
308.00
323.00
310.00
325.00
1½"
DCm 20-N
DC 20-N
0.75
1
25 ÷ 250
19 ÷ 8
315.00
330.00
DCm 30-N
DC 30-N
1.1
1.5
25 ÷ 275
26 ÷ 9
370.00
370.00
Power cable: 10 metres standard equipment with Schuko plug in single-phase versions Impeller: technopolymer Shaft: AISI 431 stainless steel Two mechanical seals separated by an oil chamber (For DC30-N shaft with double mechanical seal with sealing ring) External float switch: standard issue on single-phase versions Patent n. EP2313658 Patent Pending n° BO2015A000116 Registered EU Design n. 002501486-0001
SUBMERSIBLE PUMPS WITH GRINDER
TRITUS
Submersible pumps with grinder
MODEL
POWER P� Single-phase Three-phase kW HP
TRm 0.75
TR 0.75
0.75
1
PERFORMANCE Q H l/min metres 10 ÷ 120
PORT PRICE of € delivery Single-ph. Three-ph.
15.5 ÷ 4.5
650.00
620.00
680.00
650.00
1,120.00
1,010.00
–
1,090.00
1¼"
TRm 1.1
TR 1.1
1.1
1.5
10 ÷ 120
22 ÷ 10
TRm 1.5
TR 1.5
1.5
2
10 ÷ 200
24 ÷ 13 1½"
–
TR 2.2
2.2
3
10 ÷ 220
29 ÷ 16
High resistance tempered stainless steel grinder Power cable: 10 metres standard equipment Impeller: – technopolymer for TR 0.75, TR 1.1 – precision cast AISI 304 stainless steel for TR 1.5, TR 2.2 Shaft: AISI 431 stainless steel Two mechanical seals separated by an oil chamber Standard supply single-phase version: – Control panel – Windings with built-in thermal overload protector – External float switch Patent n. EP2313658 Patent Pending n° BO2015A000116 Registered EU Design n. 002501486-0002 (TR 0.75, TR 1.1) Registered trade mark n. 013017181
49
Price List 50
CAST IRON SUBMERSIBLE PUMPS
VXC
Submersible "VORTEX" pumps for sewage water MODEL
Single-phase Three-phase
POWER P� kW HP
VXCm 15/50
VXC 15/50
1.1
1.5
100 ÷ 600
10.5 ÷ 2
VXCm 20/50
VXC 20/50
1.5
2
100 ÷ 700
12 ÷ 2
VXCm 30/50
VXC 30/50
2.2
3
100 ÷ 850
VXCm 15/70
VXC 15/70
1.1
1.5
VXCm 20/70
VXC 20/70
1.5
VXCm 30/70
VXC 30/70
2.2
PERFORMANCE Q H l/min metres
PORT PASSAGE of of solids delivery mm
680.00
680.00
724.00
702.00
15 ÷ 2
1,202.00
722.00
200 ÷ 850
5.5 ÷ 1
736.00
736.00
2
200 ÷ 1000
7.4 ÷ 1
778.00
754.00
3
200 ÷ 1200 9.7 ÷ 1.5
1,255.00
775.00
2½"
3"
Single-phase Three-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
MCm 15/50
MC 15/50
1.1
1.5
100 ÷ 800
14 ÷ 1
MCm 20/50
MC 20/50
1.5
2
100 ÷ 900
16 ÷ 1
PORT PASSAGE of of solids delivery mm
2½"
718.00
718.00
756.00
734.00
Ø 50
MC 30/50
2.2
3
100 ÷ 1100
22 ÷ 2
1,240.00
756.00
–
MC 40/50
3
4
100 ÷ 1100
24 ÷ 4
–
940.00
MCm 30/70
MC 30/70
2.2
3
200 ÷ 1500
12 ÷ 2
1,280.00
810.00
–
PRICE € Single-ph. Three-ph.
MCm 30/50
3"
Ø 70
Submersible "DOUBLE-CHANNEL" pumps for sewage water MODEL
Ø 50
Power cable: 10 metres standard equipment Impeller: cast iron VORTEX Shaft: AISI 431 stainless steel
MC
PRICE € Single-ph. Three-ph.
MC 40/70
3
4
200 ÷ 1600
15÷ 4
Ø 70
–
1,010.00
Power cable: 10 metres standard equipment Impeller: DOUBLE-CHANNEL AISI 304 stainless steel Shaft: AISI 431 stainless steel
Standard supply single-phase version: - External float switch - Control panel - Capacitor (inside the control panel) - Thermal overload protector build into the motor winding 2.2 kW single-phase pumps, the thermal overload protector must be connected to the external control panel Standard supply three-phase version: For three-phase water pumps three thermal overload protectors in series are built into the winding and these must be connected to the control box Patent Pending n° BO2015A000116 Registered EU Design n. 342159-0017
50
Price List 50
CAST IRON SUBMERSIBLE PUMPS
VXC-F
Submersible "VORTEX" pumps for sewage water MODEL
Single-phase VXCm 15/50-F VXCm 20/50-F VXCm 30/50-F VXCm 15/70-F VXCm 20/70-F VXCm 30/70-F
Three-phase VXC 15/50-F VXC 20/50-F VXC 30/50-F VXC 15/70-F VXC 20/70-F VXC 30/70-F
1.1
1.5
100 ÷ 600
10.5 ÷ 2
1.5
2
100 ÷ 700
12 ÷ 2
2.2
3
100 ÷ 850
15 ÷ 2
1.1
1.5
200 ÷ 850
5.5 ÷ 1
1.5
2
200 ÷ 1000
7.4 ÷ 1
2.2
3
200 ÷ 1200
9.7 ÷ 1.5
PASSAGE of solids
mm Ø 50
Ø 70
PRICE € Single-ph. Three-ph. 725.00 725.00 769.00 747.00 1,247.00 767.00 781.00 781.00 820.00 798.00 1,300.00 820.00
Submersible "DOUBLE-CHANNEL" pumps for sewage water
MCm 15/50-F MCm 20/50-F MCm 30/50-F – MCm 30/70-F –
PERFORMANCE Q H l/min metres
Power cable: 10 metres standard equipment Impeller: cast iron VORTEX Shaft: AISI 431 stainless steel
MC-F
POWER P� kW HP
MC 15/50-F MC 20/50-F MC 30/50-F MC 40/50-F MC 30/70-F MC 40/70-F
1.1
1.5
100 ÷ 800
14 ÷ 1
1.5
2
100 ÷ 900
16 ÷ 1
2.2
3
100 ÷ 1100
22 ÷ 2
3
4
100 ÷ 1100
24 ÷ 4
2.2
3
200 ÷ 1500
12 ÷ 2
3
4
200 ÷ 1600
15÷ 4
Ø 50
760.00 798.00 1,282.00 –
Ø 70
1,330.00 –
760.00 777.00 798.00 1,000.00 850.00 1,065.00
Power cable: 10 metres standard equipment Impeller: DOUBLE-CHANNEL AISI 304 stainless steel Shaft: AISI 431 stainless steel
PVXC - PMC
STATIONARY VERSION
(pumps with connection support KIT)
Standard installation
Base pedestal KIT for VXC-F and MC-F For VXC /50-F and MC /50-F pumps For VXC /70-F and MC /70-F pumps
PRICE € 112.00 145.00
The kit consists of the base pedestal complete with counterflange and guide tube supports
Flygt® base pedestal elbow adaptor KIT For VXC /50-F and MC /50-F Ø 65 mm Flygt For VXC /70-F and MC /70-F Flygt® Ø 65 and Ø 80 mm Flygt
COUNTERFLANGE CODE DN 2½" ASSPVXCN050 3" ASSPVXCN070
CODE
PRICE €
ASSPVXC1F65
92.00
ASSPVXC1F80
97.00
The kit consists of the base pedestal elbow adaptor, the gasket and four screws for fixing to the pump body
51
Price List 50
SUBMERSIBLE PUMPS
VX 40
Submersible "VORTEX" pumps for sewage water
MODEL Single-phase Three-phase
POWER P� kW HP
PERFORMANCE Q H l/min metres
VXm 30/40
VX 30/40
2.2
3
100 ÷ 750
19 ÷ 3
–
VX 40/40
3
4
100 ÷ 800
22 ÷ 5
–
VX 55/40
4
5.5
100 ÷ 850
25 ÷ 6
PORT PASSAGE of of solids delivery mm
DN 50 2"
Three-phase BC 55/35
POWER P� kW HP 4
5.5
PERFORMANCE Q H l/min metres 300 ÷ 1700
PORT PASSAGE of of solids delivery mm
BC 75/35
–
1,170.00
–
1,280.00
5.5
7.5
PRICE € Three-phase –
22 ÷ 5.5 DN 65
1,065.00
Submersible "DOUBLE-CHANNEL" pumps for sewage water
MODEL
1,545.00
Power cable: 10 metres standard equipment Two mechanical seals separated by an oil chamber Impeller: cast iron VORTEX Shaft: AISI 431 stainless steel Standard supply single-phase version: - External float switch - Control panel - Capacitor (inside the control panel) - Protector build In the three-phase pump the t hermal overload protector is embedded into the motor Patent Pending
BC 35
Ø 40
PRICE € Single-ph. Three-ph.
Ø 35
300 ÷ 1900 27.5 ÷ 7.5
–
Power cable: 10 metres standard equipment Two mechanical seals separated by an oil chamber Impeller: cast iron DOUBLE-CHANNEL Shaft: AISI 431 stainless steel In the three-phase pump the t hermal overload protector is embedded into the motor Patent Pending
52
Price List 50
PLUG & DRAIN PLUG & DRAIN
Emergency kit for preventing �oods PRICE €
COMPONENTS SUBMERSIBLE TOP2-FLOOR PUMP Single-phase 230 V - 50 Hz Thermal overload protector incorporated in the winding 10 metre power cable fitted with Schuko plug External float switch “FASTFIT 1.25” rapid connection Performance: – H max= 9 m – Q max= 160 l/min Emptying level down to 2 mm from the bottom
PVC HOSE “FASTFIT 1.25” rapid connection Length of tube 15 m Diameter of tube 1¼”
346.00
CRATE-FILTER Complete with a system for fixing the pump for a stable operation and an easy detachment for use of the pump without the crate-filter Complete with a lid so as to put away PLUG & DRAIN in order andhave it always ready for use
PLUG & DRAIN PLUG & DRAIN is the indispensable and practical emergency kit for tackling flooding in garages, cellars and basements with efficacy and speed. Thanks to the versatile drainage pump and the 15 metres long PVC hose it is possible to swiftl y drain the flooded area, if necessary using the plastic crate as a filter. With PLUG & DRAIN you can completely drain the area affected by flooding: the pump can in fact suck up water down to a level of only 2 mm from the bottom. With PLUG & DRAIN you have everything you require ready for use: – pump with a ready-fitted connector, a 10 metre long power cable with Schuko plug and an ex ternal float switch; – PVC hose with a rapid connector; – crate-filter to prevent possible bulky residues blocking water drainage.
53
Price List 50
ACCUMULATION AND LIFTING STATIONS FOR WASTE WATER
SAR 40
Clear waste water - rainwater
MODEL
POWER P�
TANK MAXIMUM CAPACITY FLOW RATE
MAXIMUM HEAD
PRICE
(TANK + ELECTRIC PUMP)
kW
HP
litres
l/min
metres
€
SAR 40-TOP 1
0.25
0.33
40
160
6
362.00
SAR 40-TOP 2
0.37
0.50
40
220
8
367.00
SAR 40-TOP 3
0.55
0.75
40
260
10
389.00
SAR 40-RXm 1
0.25
0.33
40
160
6.5
417.00
SAR 40-RXm 2
0.37
0.50
40
220
9.5
423.00
SAR 40-RXm 3
0.55
0.75
40
220
11.5
446.00
MAXIMUM HEAD
PRICE
SAR 40
Dirty or sewage waste water POWER P�
MODEL
TANK MAXIMUM CAPACITY FLOW RATE
(TANK + ELECTRIC PUMP)
kW
HP
litres
l/min
metres
€
SAR 40-TOP 2-VORTEX
0.37
0.50
40
180
6.5
378.00
SAR 40-RXm 2/20
0.37
0.50
40
180
6.5
435.00
COMPONENTS 40-litre polyethylene tank with cover plate Pump with float switch Power cable: 5 metres standard equipment with Schuko plug Non-return valve Lifting stations with inlet pipe 1 ½" gas, discharge pipe 1 ¼" gas and vent pipe ½" gas
Attention: Standard EN 60335-2-41 requires the use of a 10 metre long cable for outdoor applications
For the model with a 10 metre long power cable, add
€ 13.50
DIMENSIONS
m m 0 1 4
3 1 0 m m
m m 0 1 4
54
Price List 50
ACCUMULATION AND LIFTING STATIONS FOR WASTE WATER
SAR 100
Clear waste water - rainwater
MODEL
POWER P�
TANK MAXIMUM CAPACITY FLOW RATE
MAXIMUM HEAD
PRICE
(TANK + ELECTRIC PUMP)
kW
HP
litres
l/min
metres
€
SAR 100-TOP 2
0.37 0.50
100
220
8
581.00
SAR 100-TOP 3
0.55 0.75
100
260
10
603.00
SAR 100-TOP 4 N
0.75
1
100
320
12.5
702.00
SAR 100-TOP MULTI 2
0.55
0.75
100
80
40
692.00
SAR 100-TOP MULTI 3
0.55
0.75
100
120
32
702.00
SAR 100-RXm 2
0.37
0.50
100
220
9.5
636.00
SAR 100-RXm 3
0.55
0.75
100
220
11.5
659.00
SAR 100-Dm 10-N
0.75
1
100
300
15.5
745.00
SAR 100-Dm 20-N
0.75
1
100
250
19
756.00
SAR 100-Dm 30-N
1.1
1.5
100
275
26
781.00
MAXIMUM HEAD metres
PRICE
SAR 100
Dirty or sewage waste water
(TANK + ELECTRIC PUMP)
POWER P� kW HP
SAR 100-TOP 2-VORTEX
0.37
0.50
100
180
6.5
592.00
SAR 100-TOP 3-VORTEX
0.55
0.75
100
180
8
614.00
SAR 100-RXm 2/20
0.37
0.50
100
180
6.5
648.00
SAR 100-RXm 3/20
0.55
0.75
100
180
8
670.00
SAR 100-ZXm 1A/40
0.60
0.85
100
400
10.5
724.00
SAR 100-VXm 8/35-N
0.55
0.75
100
350
8
745.00
SAR 100-VXm 10/35-N
0.75
1
100
400
10
750.00
SAR 100-VXm 8/50-N
0.55
0.75
100
450
6
756.00
SAR 100-VXm 10/50-N
0.75
1
100
550
8.5
760.00
SAR 100-BCm 10/50-N
0.75
1
100
600
11
805.00
SAR 100-TRm 0.75
0.75
1
100
120
15.5
1,160.00
SAR 100-TRm 1.1
1.1
1.5
100
120
22
1,190.00
MODEL
TANK MAXIMUM CAPACITY FLOW RATE litres l/min
€
COMPONENTS 100-litre polyethylene tank with cover plate Pump with float switch Power cable: 10 metres standard equipment with Schuko plug Control panel (only for TR) Lifting stations with inlet pipe Ø 110 mm, discharge pipe 1 ¼" or 1 ½" or 2" gas and vent pipe Ø 50 mm
DIMENSIONS
m m 5 4 6
m m 0 9 6
5 0 0 m m
55
Price List 50
ACCUMULATION AND LIFTING STATIONS FOR WASTE WATER
SAR 250
Clear waste water - rainwater
MODEL
POWER P� kW HP
(TANK + ELECTRIC PUMP)
SAR 250-TOP 3 SAR 250-TOP 4 N SAR 250-TOP 5 N SAR 250-RXm 3 SAR 250-RXm 4 SAR 250-RXm 5 SAR 250-Dm 10-N SAR 250-Dm 20-N SAR 250-Dm 30-N
SAR 250 (TANK + ELECTRIC PUMP)
SAR 250-TOP 2-VORTEX SAR 250-TOP 3-VORTEX SAR 250-RXm 3/20 SAR 250-RXm 4/40 SAR 250-RXm 5/40 SAR 250-VXm10/35-ST SAR 250-VXm10/50-ST SAR 250-BCm10/50-ST SAR 250-VXm 10/35-N SAR 250-VXm 15/35-N SAR 250-VXm 10/50-N SAR 250-VXm 15/50-N SAR 250-BCm 10/50-N SAR 250-BCm 15/50-N SAR 250-TRm 0.75 SAR 250-TRm 1.1 SAR 250-TRm 1.5
m m 0 0 3
Extension kit
m m 0 8 8
MAXIMUM HEAD metres
0.55 0.75 0.92
0.75 1 1.25
250 250 250
260 320 360
10 12.5 15
0.55 0.75 1.1
0.75 1 1.5
250 250 250
220 260 300
11.5 15 19.5
0.75 0.75 1.1
1 1 1.5
250 250 250
300 250 275
15.5 19 26
PRICE € 777.00 877.00 887.00 825.00 1,163.00 1,195.00 964.00 975.00 1,000.00
Dirty or sewage waste water
MODEL
DIMENSIONS
TANK MAXIMUM CAPACITY FLOW RATE litres l/min
POWER P� kW HP
TANK MAXIMUM CAPACITY FLOW RATE litres l/min
MAXIMUM HEAD metres
0.37 0.55
0.50 0.75
250 250
180 180
6.5 8
0.55 0.75 1.1
0.75 1 1.5
250 250 250
180 280 380
8 9.5 12.5
0.75 0.75
1 1
250 250
400 550
10.5 9.5
0.75
1
250
600
11
0.75 1.1 0.75 1.1
1 1.5 1 1.5
250 250 250 250
400 500 550 650
10 13.5 8.5 11
0.75 1.1
1 1.5
250 250
600 750
11 14
0.75 1.1
1 1.5
250 250
120 120
15.5 22
1.5
2
250
200
24
PRICE € 767.00 789.00 836.00 1,195.00 1,223.00 1,253.00 1,280.00 1,322.00 964.00 1,000.00 974.00 1,012.00 1,024.00 1,058.00 1,375.00 1,405.00 1,845.00
COMPONENTS 250-litre polyethylene tank with cover plate Pump with float switch Power cable: 10 metres standard equipment with Schuko plug Control box (only for TR) Lifting stations with inlet pipe Ø 110 mm, discharge pipe 1 ¼" or 1 ½" or 2" gas and vent pipe Ø 50 mm or Ø 70 mm Base pedestal and guide tubes for lowering the pump (only for VX-ST and BC-ST)
m m 0 8 8
7 2 5 m m
BASE PEDESTAL (SPARE) for VX-ST and BC-ST GS1 Cod. 159SV340TE
OPTIONALS AVAILABLE ON REQUEST Alarm KIT (Code KSKIT-ALLARME) 12.00 €
300 mm extension kit (Code KSKIT-300MA) PA/1
DN1=1 ½” DN2=2”
DN2 Cod. 54SARST003
PA/2
DN1=2” DN2=2”
Cod. 54SARST004 (VX /50-ST - BC /50-ST)
€ 117.00
Kit includes: Extension kit for the installation of the polyethylene "SAR" tank at greater depths
154.00 €
(VX /35-ST) DN1
€ 394.00
Kit includes: Float switch, Self-powered siren, Control box
300 mm extension kit for VX-I and BC-I versions (Code KSKIT-300MM)
€ 186.00
Kit includes: Extension kit for the installation of the polyethylene "SAR" tank at greater depths Longer guide tubes for lowering the pump
165.00 €
56
Price List 50
ACCUMULATION AND LIFTING STATIONS FOR WASTE WATER
SAR 550
Clear waste water - rainwater
MODEL
POWER P�
Extension kit
PRICE
metres
€
12.5 15
2,302.00 2,322.00 2,820.00 2,884.00 2,389.00 2,411.00 2,460.00
(1 pump)
kW
HP
litres
SAR 550-TOP 4 N SAR 550-TOP 5 N SAR 550-RXm 4 SAR 550-RXm 5 SAR 550-Dm 10-N SAR 550-Dm 20-N SAR 550-Dm 30-N
0.75 0.92
1 1.25
550 550
l/min 320 360
0.75 1.1
1 1.5
550 550
260 300
15 19.5
0.75 0.75 1.1
1 1 1.5
550 550 550
300 250 275
15.5 20 26
Dirty or sewage waste water POWER P�
MODEL
m m 0 0 3
MAXIMUM HEAD
(TANK + ELECTRIC PUMP)
SAR 550
DIMENSIONS
TANK MAXIMUM CAPACITY FLOW RATE
TANK MAXIMUM CAPACITY FLOW RATE (1 pump)
MAXIMUM HEAD
PRICE
metres
€
9.5 12.5
2,745.00 2,800.00 2,946.00 3,000.00 3,085.00 2,358.00 2,460.00 2,378.00 2,484.00 2,474.00 2,543.00 3,075.00 3,135.00 4,015.00
(TANK + ELECTRIC PUMP)
kW
HP
litres
SAR 550-RXm 4/40 SAR 550-RXm 5/40 SAR 550-VXm 10/35-ST SAR 550-VXm 10/50-ST SAR 550-BCm10/50-ST SAR 550-VXm 10/35-N SAR 550-VXm 15/35-N SAR 550-VXm 10/50-N SAR 550-VXm 15/50-N SAR 550-BCm 10/50-N SAR 550-BCm 15/50-N SAR 550-TRm 0.75 SAR 550-TRm 1.1 SAR 550-TRm 1.5
0.75 1.1
1 1.5
550 550
l/min 280 380
0.75 0.75
1 1
550 550
400 550
10.5 9.5
0.75
1
550
600
11
0.75 1.1 0.75 1.1
1 1.5 1 1.5
550 550 550 550
400 500 550 650
10 13.5 8.5 11
0.75 1.1
1 1.5
550 550
600 750
11 14
0.75 1.1
1 1.5
550 550
600 750
11 14
1.5
2
550
200
24
COMPONENTS 550-litre polyethylene tank with two cover plates Two single-phase pumps Power cable: 10 metres standard equipment with Schuko plug Control panel Three float switches for: 1) the alternate start-up of one of the two pumps, 2) maximum level for starting-up the second pump, 3) minimum level for switching the pumps off Lifting stations with inlet pipe Ø 110 mm, discharge pipe 1 ¼" or 1 ½" or 2" gas and vent pipe Ø 50 mm or Ø 70 mm Base pedestal and guide tubes for lowering the pump (only for VX-ST and BC-ST)
m m 0 8 8
1 4 7 5 m m m m 0 8 8
BASE PEDESTAL (SPARE) for VX-ST and BC-ST
OPTIONALS AVAILABLE ON REQUEST Alarm KIT (Code KSKIT-ALLARME)
GS1 Cod. 159SV340TE
12.00 €
300 mm extension kit (Code KSKIT-300MA) PA/1
DN1=1 ½” DN2=2”
DN2 Cod. 54SARST003
DN1
154.00 €
Attention: the tank is supplied with two covers. Two extension kits are needed.
300 mm extension kit for VX-I and BC-I versions (Code KSKIT-300MM)
PA/2
Kit includes: Extension kit for the installation of the polyethylene "SAR" tank at greater depths Longer guide tubes for lowering the pump Attention: the tank is supplied with two covers. Two extension kits are needed.
Cod. 54SARST004 (VX /50-ST - BC /50-ST)
€ 117.00
Kit includes: Extension kit for the installation of the polyethylene "SAR" tank at greater depths
(VX /35-ST) DN1=2” DN2=2”
€ 394.00
Kit includes: Float switch, Self-powered siren, Control box
€ 186.00
165.00 €
57
Price List 50
AUTOMATIC PRESSURE BOOSTING SETS (AUTOCLAVES) HYDROFRESH MODEL
Autoclave sets POWER (P�)
FLOW RATE (1)
SETTING (2)
PRICE
kW
HP
l/min
bar
€
0.37
0.50
32
1.4 ÷ 2.8
0.48
0.65
50
1.4 ÷ 2.8
0.55
0.75
55
1.8 ÷ 3.2
134.50 187.50 195.50
0.37
0.50
32
1.4 ÷ 2.8
0.50
0.70
40
1.5 ÷ 3.0
0.37
0.50
50
1.2 ÷ 2.6
0.48
0.65
50
1.4 ÷ 2.8
0.55
0.75
55
1.8 ÷ 3.2
0.75
1
70
2.0 ÷ 3.5
0.90
1.25
70
2.4 ÷ 3.8
1.1
1.5
70
2.8 ÷ 4.0
0.37
0.50
32
1.4 ÷ 2.8
0.50
0.70
40
1.5 ÷ 3.0
0.75
1
90
1.8 ÷ 3.2
1.1
1.5
120
2.2 ÷ 3.5
0.48
0.65
50
1.4 ÷ 2.8
0.55
0.75
55
1.8 ÷ 3.2
0.75
1
70
2.0 ÷ 3.5
0.90
1.25
70
2.4 ÷ 3.8
1.1
1.5
70
2.8 ÷ 4.0
0.48
0.65
50
1.4 ÷ 2.8
0.55
0.75
55
1.8 ÷ 3.2
0.75
1
70
1.9 ÷ 3.4
1.1
1.5
70
2.7 ÷ 4.0
0.75
1
70
2.0 ÷ 3.5
0.90
1.25
70
2.4 ÷ 3.8
1.1
1.5
70
2.8 ÷ 4.0
HYDROFRESH 05VT PKm 60 - 05 VT JSWm1 BX - 05 VT JSWm1 AX - 05 VT
HYDROFRESH 24 SF - 24 SF PKm 60 - 24 SF PKm 65 JSWm 1 CX - 24 SF JSWm 1 BX - 24 SF JSWm 1 AX - 24 SF JSWm 2CX - 24 SF JSWm 2BX - 24 SF JSWm 2AX - 24 SF
168.00 184.00 213.00 215.00 223.00 239.00 250.00 260.00
HYDROFRESH 24 CL PKm 60 - 24 CL PKm 65 - 24 CL CPm 158 - 24 CL CPm 170 - 24 CL JSWm 1 BX - 24 CL JSWm 1 AX - 24 CL JSWm 2CX - 24 CL JSWm 2BX - 24 CL JSWm 2AX - 24 CL JCRm 1 B - 24 CL JCRm 1 A - 24 CL JCRm 2C - 24 CL JCRm 2A - 24 CL
178.00 194.00 258.00 378.00 228.00 236.00 254.00 265.00 275.00 259.00 266.00 284.00 305.00
HYDROFRESH 60 CL JSWm 2CX - 60 CL JSWm 2BX - 60 CL JSWm 2AX - 60 CL
COMPONENTS Single-phase pump Tank Pressure switch PSG-1 Pressure gauge (for 24SF, 24CL and 60CL)
349.00 360.00 370.00
Hose (for 24CL and 60CL) Brass connector 1.5 m power cable with Schuko plug
(1) Maximum flow rate at the minimum recommended pressure switch pressure (2) Recommended pressure range
58
Price List 50
AUTOMATIC SETS FITTED FOR AUTOCLAVES CB2
Pressure boosting sets
MODEL
MAXIMUM MAX POWER INSTALLED (P�) FLOW RATE HEAD
kW
HP
CB2 - MK 3/3-N
2x0.75
2x1
CB2 - MK 3/4-N
2x1.1 2x1.5
m³/h
52
9.6
69.5
IE3
CB2 - MK
€
metres suct.
9.6
PRICE
PORTS
2"
deliv. Single-ph. Three-ph.
1,800.00
1,945.00
1,830.00
1,970.00
1½"
CB2 - MK 3/5-N
2x1.1 2x1.5
9.6
87
1,850.00
1,990.00
CB2 - MK 3/6-N
2x1.5
9.6
104
1,895.00
2,025.00
CB2 - MK 5/4-N
2x1.1 2x1.5
14.4
56
1,830.00
1,970.00
CB2 - MK 5/5-N
2x1.1 2x1.5
14.4
70
1,850.00
1,990.00
CB2 - MK 5/6-N
2x1.5
14.4
84
1,895.00
2,025.00
CB2 - MK 5/7-N
2x1.8 2x2.5
14.4
98
–
2,055.00
CB2 - MK 5/8-N
2x2.2
2x3
14.4
112
–
2,080.00
CB2 - MK 8/4-N
2x1.5
2x2
21.6
56
2,000.00
2,150.00
CB2 - MK 8/5-N
2x1.8 2x2.5 IE3
21.6
70
–
2,180.00
CB2 - MK 8/6-N
2x2.2
2x3
21.6
86
–
2,205.00
CB2 - 4CPm 100-C
2x0.75
2x1
15.6
50
1,225.00
–
CB2 - 3CRm80
2x0.45 2x0.60
9.6
40
1,215.00
–
1,240.00
–
1,320.00
–
1,330.00
–
1,360.00
–
1,290.00
1,450.00
1,575.00
1,735.00
1,585.00
1,735.00
2x2
v2
IE3
IE3
2"
2½"
1½"
1½"
1½"
1½"
IE2
CB2 - CR
CB2 - 4CRm80
2x0.55 2x0.75
9.6
52
CB2 - 5CRm80
2x0.75
2x1
9.6
67
CB2 - 4CRm100
2x0.75
2x1
15.6
50
IE3
1½"
2"
CB2 - 5CRm100
2x1.1 2x1.5
15.6
63
CB2 - 2CP25/130N
2x0.75
12.0
42
CB2 - 2CP 25/14B
2x1.1 2x1.5
12.0
54
CB2 - 2CP 25/16C
2x1.1 2x1.5 IE3
14.4
47
2x1
1½"
1½"
1½"
1½" 2"
CB2 - 2CP
CB2 - 2CP 25/16B
2x1.5
2x2
16.8
58
1,650.00
1,790.00
CB2 - 2CP 25/16A
2x2.2
2x3
19.2
68
–
1,820.00
CB2 - 2CP32/200C
2x3
2x4
30.0
70
–
2,865.00
CB2 - 2CP32/200B
2x4
2x5.5
30.0
85
–
2,950.00
IE3
3"
2"
CB2 - 2CP32/210B
2x5.5 2x7.5
30.0
94
–
3,170.00
CB2 - 2CP32/210A
2x7.5
2x10
30.0
112
–
3,290.00
CB2 - 2CP40/180C
2x4
2x5.5
42.0
64
–
3,865.00
–
3,900.00
–
4,000.00
CB2 - 2CP40/180B
2x5.5 2x7.5 IE3
48.0
76
CB2 - 2CP40/180A
2x7.5
48.0
88
2x10
4"
3"
DN 100
DN 80
* Indicates the maximum flow rate of the two pumps at the minimum recommended pressure
CB2 - 2CP
Three phase motor efficiency class (IEC 60034-30)
59
Price List 50
EASYPUMP EASYPUMP-EP 1
Pumps with electronic pressure regulator
MODEL
COMPONENTS EASYPUMP - EP 1: Single-phase pump EASYPRESS-1M with pressure gauge GSR quick-fit joint 1.5 metre power cable with Schuko plug
PRICE
POWER (P�)
Single-phase
kW
HP
€
PKm 60 - EP 1
0.37
0.50
189.00
PKm 65 - EP 1
0.50
0.70
205.00
3CPm 80-C - EP 1
0.45
0.60
250.00
4CPm 80-C - EP 1
0.55
0.75
267.00
3CPm 100-C - EP 1
0.55
0.75
265.00
4CPm 100-C - EP 1
0.75
1
294.00
3CRm 80
- EP 1
0.45
0.60
264.00
4CRm 80
- EP 1
0.55
0.75
277.00
5CRm 80
- EP 1
0.75
1
316.00
3CRm 100
- EP 1
0.55
0.75
273.00
4CRm 100
- EP 1
0.75
1
312.00
JSWm 1 B
- EP 1
0.48
0.65
257.00
JSWm 1 A
- EP 1
0.55
0.75
265.00
JSWm 2C
- EP 1
0.75
1
286.00
JSWm 2CL - EP 1
0.75
1
289.00
JSWm 2B
- EP 1
0.90
1.25
297.00
JSWm 2CX - EP 1
0.75
1
276.00
JSWm 2BX - EP 1
0.90
1.25
287.00
EASYPUMP - EP 1 Small pumps fitted with an electronic pressure regulator that starts and stops the pump as required when a tap is turned on or off. The pump is also protected against dry running.
EASYPUMP-EP 2
Pumps with electronic pressure regulator
MODEL Single-phase
kW
HP
€
2CPm 25/14B - EP 2
1.1
1.5
447.50
JSWm 2A
1.1
1.5
307.50
COMPONENTS EASYPUMP - EP 2: Single-phase pump EASYPRESS-2M with pressure gauge GSR quick-fit joint 1.5 metre power cable with Schuko plug
PRICE
POWER (P�)
- EP 2
Use the 1.5 HP (1.1 kW) EASYPRESS 2
EASYPUMP - EP 2 Small pumps fitted with an electronic pressure switch that starts and stops the pump as required when a tap is turned on or off. The pump is also protected against dry running.
60
Price List 50
ELECTRONIC PRESSURE REGULATORS ELECTRONIC PRESSURE REGULATORS* MODEL EASYSMALL-1
Without pressure gauge
EASYSMALL-2
50066/415
EASYSMALL-2M With pressure gauge
Hz
Current Fittings 1 pc.
50066/315 50066/315P
Without pressure gauge
Power (P�) Volt kW HP
EASYSMALL-1M With pressure gauge
CODE
0.75
1
230 50/60
12 A
1" x 1"
1.5
2
230 50/60
16 A
1" x 1"
50066/415P
Registered EU Design n. 001774928 Registered trade mark n. 0001511131 EASYSMALL®
PRICE € each 5 pcs. 10 pcs. 25 pcs.
52.00 50.50 49.50 48.50 57.00 55.00 54.00 53.00 54.00 52.50 51.50 50.50 59.00 57.00 56.00 55.00
Pump start pressure EASYSMALL: 1.5 bar Maximum flow rate: 12 m�/h
Spare electronic card and cover for EASYSMALL-1 (cod. 500699CS60)
€ 34.00
Spare electronic card and cover for EASYSMALL-2 (cod. 500699CS65)
€ 35.00
TANK MODEL ES-05
CODE 500668
Fitting 1" M
Capacity 0.5 litres
PRICE € 16.50
Pre-set 1 bar
To avoid repeated starts and to save energy, we recommend that EAS YSMALL is installed with a small pressure vessel
MODEL EASYPRESS-1
Without pressure gauge
CODE
Power (P�) Volt kW HP
EASYPRESS-2
50066/215
EASYPRESS-2M With pressure gauge
PRICE € each 1 pc.
5 pcs. 10 pcs. 25 pcs.
74.50 72.50 71.50 70.50 0.75
50066/115P
Without pressure gauge
Current Fittings
50066/115
EASYPRESS-1M With pressure gauge
Hz
1
230 50/60
10 A
1" x 1"
77.50 76.00 74.00 73.00 76.00 74.00 72.50 71.50 1.5
2
230 50/60
16 A
1" x 1"
50066/215P
79.00 77.00 75.00 74.00
Registered EU Design n. 868062 Patent n. IT 1388969, IT 1388970 Registered trade mark n. 0001334481 EASYPRESS® EASYPRESS-1 start-up pressure: 1.5 bar. 0.8 bar setting available on request. EASYPRESS-2 start-up pressure: 1.5 bar. 2.2 bar setting available on request. Maximum flow rate: 12 m�/h
Spare electronic card for EASYPRESS-1 (cod. 50066/115SB)
€ 31.00
Spare electronic card for EASYPRESS-2 (cod. 50066/215SB)
€ 31.00
MODEL
CODE
EASYPRO
50068/201
Power (P�) Volt Hz Current Fittings kW HP 1.5 2 230 50/60 16 A 1" x 1"
PRICE € 153.00
Registered EU Design n. 976824 Patent n. IT 1388969, IT 1388970 Registered trade mark n. 0001334546 EASYPRO® EASYPRO permits the selection of a pump start-up pressure within the range of 1 and 5 bar. EASYPRO is fitted with a digital pressure gauge, 3 litre surge tank and amperometric protection of the pump. Maximum flow rate: 12 m�/h
Spare electronic card for EASYPRO (cod. 50068/201SE)
€ 85.00
QUICK FIT JOINT MODEL GSR
CODE 5006991
FITTING 1" M
PRICE € 10.50
* Electronic devices that start (when a tap is turned on) and stop (when the tap is turned off ) single-phase pumps. All models guarantee the protection of the pump against dry running in the event of a lack of water and the automatic restart of the pump when water returns.
61
Price List 50
ACCESSORIES SF
Spherical tank
MODEL
CODE
24 SF
50011
Diaphragm
50019
10 pcs.
20 pcs.
29.00
28.00
27.50
27.00 € 13.00
CODE
PRICE € each
FITTING CAPACITY 1 pc.
5 pcs.
10 pcs.
20 pcs.
24 CL
50012
1"
20 litres
34.00
33.50
33.00
31.50
60 CL
50031
1"
60 litres
114.00
–
–
–
100 CL
50032
1"
100 litres
194.00
–
–
–
200 CL
50033
1½"
200 litres
358.00
–
–
–
300 CL
50034
1½"
300 litres
465.00
–
–
–
Diaphragm CODE
24 CL 50019
60 CL 5001960
100 CL 50019100
200 CL 50019200C
300 CL 50019300
PRICE €
13.00
48.00
78.00
132.00
176.00
Maximum working pressure 10 bar Replaceable butyl rubber diaphragm
VT
Vertical tanks
MODEL
CODE
PRICE € each
FITTING CAPACITY 1 pc.
5 pcs.
10 pcs.
05 VT
500668/2P
½"
0.5 litres
18.50
–
–
8 VT
50051
1"
8 litres
27.00
26.50
26.00
19 VT
50052
1"
19 litres
33.00
32.50
31.50
60 VT
50040
1"
60 litres
114.00
–
–
100 VT
50041
1"
100 litres
194.00
–
–
200 VT
50042
1½"
200 litres
358.00
–
–
300 VT
50043
1½"
300 litres
465.00
–
–
500 VT
50044
1½"
500 litres
798.00
–
–
Diaphragm CODE
8 VT 5001905/8
19 VT 50019
60 VT 5001960
9.00
13.00
48.00
PRICE €
5 pcs.
Cylindrical tanks
MODEL
24 litres
1"
1 pc.
Maximum working pressure 8 bar Replaceable butyl rubber diaphragm
CL
PRICE € each
FITTING CAPACITY
100 VT 200 VT 300 VT 50019100 50019200C 50019300 78.00
132.00
176.00
500 VT 50019500 330.00
Maximum working pressure 10 bar (8 bar for 8 VT, 19 VT)
62
Price List 50
ACCESSORIES SPHERICAL KIT MODEL
KSP-05
PRICE € each
CODE 1 pc.
5 pcs.
10 pcs.
20 pcs.
KSP-05 0.5 litres tank 4-way fitting - 1" gas Pressure switch "PSG-1" 1.5 m long power cable with Schuko plug
50008KSP05/1
42.50
40.50
38.50
–
KSP-24 24 litres spherical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Pressure switch "PSG-1"
50008SP24
49.00
47.00
46.50
45.50
KSD-24 24 litres spherical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Pressure switch "FSG2"
50010
53.50
52.00
51.50
51.00
KSP-24
CYLINDRICAL KIT CODE
MODEL KCP-24
PRICE € each 1 pc.
5 pcs.
10 pcs.
20 pcs.
KCP-24 20 litres cylindrical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Hose 1" gas (500 mm) Pressure switch "PSG-1"
50008CP24
64.50
62.50
60.50
59.50
KCD-24 20 litres cylindrical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Hose 1" gas (500 mm) Pressure switch "FSG2"
50009
69.00
67.00
66.00
65.00
MODEL
CODE
KCP-60
PRICE € each 1 pc.
5 pcs.
10 pcs.
KCP-60 60 litres cylindrical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Hose 1" gas (600 mm) Pressure switch "PSG-1"
50008CP60
147.00
138.00
135.00
KCD-60 60 litres cylindrical tank 0 ÷ 6 bar pressure gauge 5-way fitting - 1" gas Hose 1" gas (600 mm) Pressure switch "FSG2"
50009/67
151.50
146.00
144.00
63
Price List 50
ACCESSORIES ACCESSORIES FOR SUBMERSIBLE PUMPS MODEL
116310 116311 116312 116313 116314
SECURITY ROPE (in polypropylene)
ROPE WEIGHT 30 gr/m 45 gr/m 65 gr/m 90 gr/m 115 gr/m
MAXIMUM LOAD 960 kg 1425 kg 2030 kg 2790 kg 3500 kg
0.55 per metre 0.75 » 1.20 » 1.60 » 2.10 »
100 gr/m
1500 kg
2.90 per metre
PRICE €
Twisted rope in UV stabilized polypropylene threads
SECURITY ROPE
116305
(in AISI 316 stainless steel)
ROPE DIAMETER Ø 8 mm Ø 10 mm Ø 12 mm Ø 14 mm Ø 16 mm
CODE
Ø 5 mm
49-core rope in AISI 316 stainless steel
MODEL STRAIGHT SHACKLE WITH PIN (for 8 mm wire rope) (in AISI 316 stainless steel)
5 mm WIRE ROPE CLAMP (in AISI 316 stainless steel)
PRICE €
CODE 1160305
3.40
1160304
2.10
FLOAT SWITCHES MODEL
0315/3 0315/5 0315/10
CABLE H07 RN-F 50014H
CABLE PVC 50014
3 metres
500145H
500145
5 metres
5001410H
5001410
10 metres
H07 RN-F 1 pc.
1 pc.
PVC 5 pcs.
10 pcs.
20.00 27.00 39.00
15.50 18.00 24.50
14.50 17.50 –
13.50 17.00 –
50014/1H
50014/1
3 metres
17.00 19.50 26.50
16.50 19.20 –
16.00 19.00 –
50014/5H
50014/5
5 metres
50014/10H 50014/10
10 metres
24.00 29.00 42.00
With H07 RN-F cable: single function (emptying) floats, with double watertight protection chamber and 10 A switch With PVC cable: dual function (emptying and filling) floats, double watertight protection chamber and 10 A switch
SMALL 3 SMALL 5
PRICE € each
LENGTH
With H07 RN-F cable: single function (emptying) floats, with 10 A switch With PVC cable: dual function (emptying and filling) floats, with 10 A switch
T 80/3 T 80/5 T 80/10
CODE
50014S4
50014S3
3 metres
50014S5
50014S51
5 metres
20.00 26.50
16.00 19.00
15.70 18.50
15.50 18.00
With H07 RN-F cable: single function (emptying) floats, with double watertight protection chamber and 10 A switch With PVC cable: dual function (emptying and filling) floats, double watertight protecti on chamber and 10 A switch
MODEL
CODE
MAC 5
54SARGL001
CABLE
LENGTH
PRICE €
PVC
10 metres
64.00
Tilting float: dual function (emptying and filling), double watertight protection chamber with 10 A switch Recommended for use with waste water collection stations (SAR)
64
Price List 50
ACCESSORIES AIRFLO
Automatic air feeders for surge tanks
MODEL AIRFLO 1 AIRFLO 2
CODE
SUITABLE FOR TANKS
50021 50022
100 ÷ 500 litres 750 ÷ 2000 litres
PRICE € 45.00 73.50
Air feeders suitable for maintaining the air cushion in surge tanks without a diaphragm.
NA � 3�WAY NIPPLE FOR AIR FEEDERS MODEL NA 1.00 NA 1.25 NA 1.50 NA 2.00
CODE 50023 50023/1 50023/2 50023/3
FITTING
DOUBLE CENTRAL FITTING
1" x 1" 1¼" x 1¼" 1½" x 1½" 2" x 2"
½" x ¼" (male/female) ½" x ¼" (male/female) ½" x ¼" (male/female) ½" x ¼" (male/female)
PRICE € 13.00 19.00 24.00 29.00
3-way brass fittings for connections with air feeders (AIRFLO)
PRESSURE SWITCHES MODEL
CODE
PRICE € each
FITTING STANDARD SETTING
1 pc.
46 pcs.
92 pcs.
184 pcs.
10.50
9.50
9.00
8.50
1 pc.
40 pcs.
80 pcs.
160 pcs.
10.50
9.50
9.00
8.50
1 pc.
125 pcs.
250 pcs.
–
15.00
14.30
13.80
–
1 pc.
50 pcs.
100 pcs.
–
PSG-1
50018/8
PSG-1M FSG 2
50018/8M
50018
¼" female 1.4 ÷ 2.8 bar
¼" male
1.4 ÷ 2.8 bar
¼" female 1.4 ÷ 2.8 bar
PSG FYG 22
50018/1
¼" female 5.4 ÷ 7.0 bar
25.00
24.50
24.00
–
FYG 32
50018/2
¼" female 8 ÷ 10.5 bar
25.50
25.00
24.00
–
1 pc.
100 pcs.
–
–
14.00
13.00
–
–
PT/5 SK
FSG
(1)
50018/8T
¼" female 1.4 ÷ 2.8 bar
Registered EU Design n. 002248955 PSG (*) Adjustable (1) Three-phase
PRESSURE GAUGES MODEL MC 6 MR 6 MR 10
MC
CODE 50015/2 50015 50015/0
FITTING
Ø
¼" - central ¼" - radial ¼" - radial
mm 50 63 63
PRICE € each
SCALE 0 ÷ 6 bar 0 ÷ 6 bar 0 ÷ 10 bar
1 pc.
10 pcs.
50 pcs.
3.40 3.40 3.40
3.30 3.30 3.30
3.20 3.20 3.20
MR GLYCERINE FILLED PRESSURE GAUGES
MCG MRG
MODEL
CODE
MCG 6 MRG 6 MRG 10
50015/2G ¼" - central 50015G ¼" - radial 50015/0G ¼" - radial
65
FITTING
Ø mm
SCALE
PRICE € each
50 63 63
0 ÷ 6 bar 0 ÷ 6 bar 0 ÷ 10 bar
13.00 13.00 13.00
Price List 50
ACCESSORIES 3 � 5 WAY FITTINGS MODEL R 3 - 3 way R 4 - 4 way R 5 - 5 way
R3 R4
R5
CODE
PRICE € each
FITTING
50017 50016V8 50016
1" 1" 1"
1 pc.
10 pcs.
20 pcs.
50 pcs.
5.80 7.20 5.90
5.50 7.00 5.70
5.30 6.80 5.50
5.10 6.60 5.30
R 3: three-way brass fittings with 1" gas connections R 4: four-way brass fittings with ½" gas and ¼" gas connections R 5: five-way brass fittings with 1" gas and ¼" gas connections
HOSES MODEL
CODE
PIPE FITTINGS
LENGTH
PRICE € each 1 pc.
TF
TF 5 TF 6 TF 10
50013 50013/1 50013/6
1" 1" 1"
1" x 1" 1" x 1" 1" x 1"
5 pcs. 10 pcs. 20 pcs. 50 pcs. 100 pcs.
500 mm 600 mm 1000 mm
11.50 11.00 10.50 10.00 9.50 9.00 12.00 11.50 11.00 10.50 10.00 9.50 15.00 14.50 14.00 13.50 13.00 12.50
LENGTH
PRICE € each
HOSES COMPLETE WITH ELBOW MODEL TFG 5 TFG 6
TFG
CODE 50013/01 50013/10
PIPE FITTINGS ¾" 1"
1" x 1" 1" x 1"
500 mm 600 mm
1 pc.
5 pcs.
10 pcs.
50 pcs. 100 pcs.
10.50 13.00
10.00 12.00
9.50 11.00
9.00 10.50
8.50 10.00
Flexible EPDM rubber hoses Maximum working pressure 10 bar
FLEXIBLE HOSE FITTINGS
MODEL
CODE
FASTFIT 1.25 FASTFIT 1.5 FASTFIT 2 FASTFIT 3
5027125 5027150 5027200 5027300
Female Hose Fitting Diameter Ø 32 mm Ø 38 mm Ø 50 mm Ø 75 mm
Threaded Male Fitting 1¼" 1½" 2" 3"
PRICE €
PRICE € each
19.00 20.00 25.00 42.00
Polypropylene flexible hose fittings kit: – n.1 female Hose Fitting – n.1 threaded male fitting
HOSETAIL FITTINGS
MODEL
CODE
HOSETAIL
THREADED FITTING
RP 0.75 RP 1 RP 1.25 RP 1.5 RP 2
50210 50211 50212 50213 50214
Ø 25 mm Ø 30 mm Ø 35 mm Ø 40 mm Ø 50 mm
¾" 1" 1¼" 1½" 2"
MODEL
CODE
HOSETAIL
THREADED FITTING
RPG 0.75 RPG 1 RPG 1.25 RPG 1.5 RPG 2
50220 50221 50222 50223 50224
Ø 25 mm Ø 30 mm Ø 35 mm Ø 40 mm Ø 50 mm
¾" 1" 1¼" 1½" 2"
1 pc.
20 pcs.
2.30 2.60 3.50 3.70 5.50
1.90 2.20 3.00 3.20 5.00
PRICE € each 1 pc.
20 pcs.
2.80 3.30 4.90 5.00 7.50
2.30 2.90 4.40 4.50 7.00
Nylon fittings
66
Price List 50
ACCESSORIES FLAT PVC HOSE PRICE €
CODE
MODEL
Lengths 5 metres 50013P125A 50013P150A 50013P200A 50013P250A 50013P300A
TP 1.25 TP 1.50 TP 2.00 TP 2.50 TP 3.00
Lengths 10 metres 50013P125B 50013P150B 50013P200B 50013P250B 50013P300B
Lengths 20 metres 50013P125C 50013P150C 50013P200C 50013P250C 50013P300C
FITTING 5 metres 1¼" 1½" 2" 2½" 3"
32.00 40.00 48.00 114.00 130.00
10 metres 20 metres
51.00 66.00 81.00 155.00 183.00
87.00 117.00 147.00 242.00 287.00
Flat, abrasion and weather resistant plasticized delivery hoses, complete with hosetail Ideal for irrigation even with fertilisers and for draining water in combination with DRAINAGE PUMPS
FLEXIBLE SUCTION HOSE
MODEL
CODE
FITTING
LENGTH
PRICE €
GARDEN KIT
50200
1"
7 metres
32.00
Flexible hose complete with foot valve
Foot valves
VF
MODEL
CODE
FITTING
VF 0.5 VF 0.75 VF 1 VF 1.25 VF 1.5 VF 2
50100 50101 50102 50103 50104 50105
½" ¾" 1" 1¼" 1½" 2"
VR-FF
10 pcs.
20 pcs.
4.30 5.90 8.50 11.20 15.30 24.50
3.60 5.40 8.00 10.60 14.80 24.00
3.10 5.10 7.50 10.40 14.60 23.50
– – 7.20 10.20 14.50 23.00
1 pc.
5 pcs.
10 pcs.
20 pcs.
4.00 6.60 7.60 12.70 15.40 25.00
3.70 6.20 7.20 12.30 15.10 24.40
3.50 5.70 6.90 12.00 14.90 24.20
3.30 5.40 6.60 11.70 14.70 24.00
Check valves
MODEL
CODE
FITTINGS
VR 0.5 VR 0.75 VR 1 VR 1.25 VR 1.5 VR 2
50110 50111 50112 50113 50114 50115
½" ¾" 1" 1¼" 1½" 2"
PRICE € each
Brass check valves
VR-FT / VR-FF
VR-FT
5 pcs.
Brass foot valves, stainless steel suction filter
VR
PRICE € each 1 pc.
Ball check valves
MODEL VR-FT 1.25 VR-FT 1.5 VR-FT 2
CODE
FITTINGS
501201 501202 501203
1¼" 1½" 2"
PRICE € 58.00 69.00 83.00
VR-FF/DN 65 - FLANGED VR-FF/DN 80 - FLANGED
501210 501212
Ø 65 mm Ø 80 mm
218.00 282.00
Check valves for submersible pumps (sewage and waste water) Max. working pressure 10 bar Min. working pressure 0.3 bar Working temperature -10°C ÷ +80 °C
67
Price List 50
ACCESSORIES SCHUKO PLUG WITH PROTECTION CASE MODEL
CODE
PRICE €
PSC
117985
15.50
Protection against water and dust with IP 65 or IP 67 grade protection Mechanical protection against tearing
POWER CABLE FOR LEVEL PROBES MODEL CSL
CODE
SECTION
WEIGHT PER METRE
117FE00C
1.5 mm²
0.019 kg
PRICE € 0,48 per metre
POWER CABLES FOR SUBMERSIBLE PUMPS MODEL 4 x 1 mm² 4 x 1.5 mm² 4 x 2.5 mm² 4 x 4 mm² 4 x 6 mm² 4 x 10 mm² 4 x 16 mm²
CODE
MODEL
WEIGHT PER METRE
117G100AN 117G150AN 117G200AN 117G250AN 117G300AN 117G350AN 117G400AN
H07 RN-F H07 RN-F H07 RN-F H07 RN-F H07 RN-F H07 RN-F H07 RN-F
0.165 kg 0.205 kg 0.290 kg 0.420 kg 0.505 kg 1.030 kg 2.050 kg
PRICE € 2.40 per metre 2.70 » 4.00 » 5.70 » 9.80 » 14.00 » 21.00 »
POWER CABLES WITH PLUG MODEL
CODE
H05 VV-F (PVC) H07 RN-F (NEOPRENE)
117FGA21G 117GLA21G
CABLE SECTION
LENGTH
3 x 0.75 mm² 3 x 1 mm²
150 cm 150 cm
PRICE € each
PLUG SCHUKO SCHUKO
1 pc.
50 pcs.
100 pcs.
3.20 4.50
3.00 4.30
2.80 4.10
“3M” POWER CABLE RESIN JOINT KIT MODEL RPS 1 RPS 2 RPS 3 (RECOMMENDED )
Assembly
CODE 530GT3M82A1 530GT3M82A2 530GT3M92A1
NUMBER OF CORES
CABLE SECTION
EXTERNAL JUNCTION DIAMETER
1 pc.
5 pcs.
4 4 4
1 ÷ 2.5 mm² 1 ÷ 10 mm² 4 ÷ 16 mm²
Ø 32 mm Ø 42 mm Ø 48 mm
41.00 83.00 67.00
39.00 81.00 65.00
PRICE € each
€ 43.00
cost for cable joint KIT if required
“3M” POWER CABLE HEAT-SHRINK JOINT KIT
(ECONOMIC)
MODEL
CODE
GPS 1 GPS 2 GPS 3 GPS 4 GPS 5 GPS 6
530GT3MGPS1 530GT3MGPS2 530GT3MGPS3 530GT3MGPS4 530GT3MGPS5 530GT3MGPS6
Assembly
NUMBER OF CORES
CABLE SECTION
4 4 4 4 4 4
1 ÷ 2.5 mm² 4 ÷ 6 mm² 10 mm² 16 mm² 25 mm² 35 mm²
PRICE € each 1 pc.
5 pcs.
17.50 27.00 33.00 39.00 43.00 46.00
16.50 25.00 31.00 37.00 41.00 44.00
cost for cable joint KIT if required
€ 32.00
68
Price List 50
ACCESSORIES F - Filter holders with plastic head MODEL MEDIUM MEDIUM JUNIOR JUNIOR SENIOR SENIOR
CODE
- F 0.75 - F1 - F 0.75 -F1 - F 0.75 -F1
THREADED FITTINGS
CARTRIDGE HEIGHT
¾" 1" ¾" 1" ¾" 1"
5" 5" 7" 7" 10" 10"
504F075M 504F100M 504F075J 504F100J 504F075S 504F100S
PRICE € 21.00 22.00 22.00 22.00 22.00 23.00
Maximum working pressure 5 bar (at temp. +20°C) Maximum temperature + 45°C (at pressure 2 bar)
Kit for disassembly of filter holders F (cod. 504KNPP)
€ 4.50
RL - Polyester filter cartridges MODEL
CODE
FILTRATION
CARTRIDGE HEIGHT
RL 5 RL 7 RL 10
504C05 504C07 504C10
50 µ 50 µ 50 µ
5" 7" 10"
FILTER HOLDER MEDIUM–F JUNIOR–F SENIOR–F
PRICE € 7.00 8.00 9.50
FA - Polypropylene filter cartridges MODEL
CODE
FILTRATION
CARTRIDGE HEIGHT
FA 5 FA 7 FA 10
504F05 504F07 504F10
50 µ 50 µ 50 µ
5" 7" 10"
FILTER HOLDER MEDIUM–F JUNIOR–F SENIOR–F
PRICE € 4.00 4.30 4.50
HA - Filter cartridge with polyphosphate crystals MODEL HA 10
CODE
CARTRIDGE HEIGHT
FILTER HOLDER
504F08
10"
SENIOR–F
PRICE € 17.50
LA - Filter cartridge with activated carbon MODEL LA 10 BX
CODE
CARTRIDGE HEIGHT
FILTER HOLDER
10"
SENIOR–F
504LA10BX
PRICE € 8.50
Te�on tape for hydraulic joints MODEL
CODE
TFN 1 TFN 2 TFN 3
14TFN/1 14TFN/21 14TFN/3
LENGTH
WIDTH
12 m 30 m 12 m
12 mm 12 mm 19 mm
COLOUR
CAPACITY
Pedrollo blue
400 ml
PRICE € each 1 pc.
100 pcs.
0.75 3.20 2.10
0.60 2.70 1.80
Aerosol paint MODEL SPRAY 1
CODE 120200A/2
69
PRICE € 14.00
Price List 50
ACCESSORIES BEARINGS FOR PUMPS AND ELECTRIC MOTORS MODEL
CODE
6201 ZZ 6201 2RS - C3 6202 ZZ - C3 6203 ZZ 6203 ZZ - C3E 6203 2RS - C3E 6203 2RS 6204 ZZ - C3 6204 ZZ - C3E 6205 ZZ 6206 ZZ - C3
113001
12 x 32 x 10 mm
113001SC3E
12 x 32 x 10 mm
113012
15 x 35 x 11 mm
113002
17 x 40 x 12 mm
113002C3E
17 x 40 x 12 mm
113002RC3E
17 x 40 x 12 mm
113002S
17 x 40 x 12 mm
113003C3E
20 x 47 x 14 mm
113003
20 x 47 x 14 mm
113004
25 x 52 x 15 mm
113005C3E
30 x 62 x 16 mm
6208 ZZ - C3 6212 ZZ - C3 6303 2RS - C3 6304 ZZ 6304 ZZ - C3 6304 2RS - C3 6306 ZZ - C3 6307 ZZ - C3 6308 ZZ - C3 6309 ZZ - C3 6310 ZZ - C3 6312 ZZ - C3 6313 ZZ - C3 6314 ZZ - C3 3203 B 2RS - C3
DIMENSIONS
113008
40 x 80 x 18 mm
113020
60 x 110 x 22 mm
113014SC3
17 x 47 x 14 mm
113013
20 x 52 x 15 mm
113013C3E
20 x 52 x 15 mm
113013SC3
20 x 52 x 15 mm
113015
30 x 72 x 19 mm
113017
35 x 80 x 21 mm
113018
40 x 90 x 23 mm
1130185
45 x 100 x 25 mm
113019
50 x 110 x 27 mm
113021
60 x 130 x 31 mm
113023
65 x 140 x 33 mm
113024
70 x 150 x 35 mm
113040RC3E
17 x 40 x 17.5 mm
PRICE € each 1 pc.
20 pcs.
1.60 2.40 2.20 2.00 2.60 3.20 3.50 3.20 3.40 4.20 7.50
1.40 2.10 2.00 1.80 2.30 3.00 3.30 3.00 3.20 4.00 7.00
1 pc.
10 pcs.
14.00 30.00 5.40 5.30 5.80 6.40 10.50 15.00 20.00 30.00 35.00 64.00 75.00 80.00 24.00
13.50 29.00 4.90 4.80 5.30 5.90 10.00 14.00 19.00 29.00 34.00 63.00 72.00 79.00 23.00
FANS FOR PUMPS AND ELECTRIC MOTORS MODEL
CODE
DIMENSIONS
SHAFT DIAMETER
PRICE €
FAN-63 FAN-71R FAN-71 FAN-80R FAN-80 FAN-80 IPX5 FAN-90R FAN-90 FAN-100R FAN-100 FAN-132 FAN-180
14VN059
104 x 21 mm
12 mm
14VN07
125 x 24 mm
14.5 mm
14VN076
114 x 20 mm
14.5 mm
14VN08
138 x 27 mm
20 mm
14VN081
132 x 27 mm
20 mm
14VN0815
132 x 27 mm
20 mm
14VN09
162 x 32 mm
24 mm
14VN095
148 x 33 mm
24 mm
14VN10
176 x 38 mm
28 mm
14VN10162
155 x 37 mm
28 mm
14VN132
165 x 45 mm
36 mm
14VN180
240 x 60 mm
55 mm
1.30 1.70 1.70 2.20 2.20 2.50 2.50 3.50 5.00 5.00 6.50 9.00
70
Price List 50
ACCESSORIES CAPACITORS WITH FASTON CONNECTIONS
Type F Capacitor with faston connections
MODEL
CODE
10 F 10 FC* 12 F 14 F 16 F - 500 16 F - 450 16 F - 250 20 F - 500 20 F - 450 25 F - 450 25 F - 250 30 F - 450 30 F - 250 31 F 35 F 35 FC* 40 F 45 F 50 F 60 F - 450 60 F - 300 60 F - 250 70 F 80 F 90 F
111010F 111010FC 111012F 111014F 111016F5 111016F 112016F 111020F5 111020F 111025F 112025F 111030F 112030F 111031F 111035F 111035F1 111040F 111045F 111050F 111060F 112061F 112060F 111070F 112080F 111090F
CAPACITY
VOLTAGE
10 µF 10 µF 12.5 µF 14 µF
450 VL 450 VL 450 VL 450 VL 500 VL 450 VL 250 VL 500 VL 450 VL 450 VL 250 VL 450 VL 250 VL 450 VL 450 VL 450 VL 450 VL 450 VL 450 VL 450 VL 300 VL 250 VL 450 VL 250 VL 450 VL
16 µF 20 µF 25 µF 30 µF 31.5 µF 35 µF 35 µF 40 µF 45 µF 50 µF 60 µF 70 µF 80 µF 90 µF
PRICE € each 1 pc.
10 pcs.
2.10 2.20 2.70 2.80 4.00 3.00 2.90 4.30 3.40 4.20 3.50 5.30 5.00 5.00 5.80 6.00 6.50 7.00 8.50 12.00 10.00 9.50 12.00 12.50 17.00
1.60 1.70 2.20 2.30 3.50 2.50 2.40 3.80 2.90 3.70 3.00 4.80 4.50 4.50 5.30 5.50 6.00 6.00 7.50 11.00 9.00 8.50 11.00 11.50 16.00
() FC = Special capacitor with reduced dimensions
Capacitors with CE marking and VDE-IMQ approval
CAPACITORS WITH CABLE CONNECTIONS
Type C Capacitor with cable connections
MODEL
CODE
10 C 12 C 16 C - 500 16 C - 450 20 C - 500 20 C - 450 25 C - 450 30 C - 250 31 C - 500 31 C - 450 35 C - 500 35 C - 450 35 CC* - 450 40 C 50 C 60 C 70 C 75 C 80 C
1110102F 1110122F 1110162F5 1110162F 1110202F5 1110202F 1110252F 1120302F 1110312F5 1110312F 1110352F5 1110352F 1110352F1 1110402F 1110502F 1120602F 1120702F5 1110752F 1120802F
CAPACITY
VOLTAGE
10 µF 12.5 µF
450 VL 450 VL 500 VL 450 VL 500 VL 450 VL 450 VL 250 VL 500 VL 450 VL 500 VL 450 VL 450 VL 450 VL 450 VL 250 VL 250 VL 450 VL 250 VL
16 µF 20 µF 25 µF 30 µF 31.5 µF 35 µF 35 40 50 60 70 75 80
µF µF µF µF µF µF µF
PRICE € each 1 pc.
5 pcs.
2.70 3.20 3.70 3.50 4.50 3.40 4.60 4.80 5.80 5.50 7.50 6.50 6.50 7.00 9.00 12.00 13.00 14.00 15.00
2.40 2.70 3.20 3.00 4.00 2.90 4.10 4.70 5.30 5.00 6.50 5.50 5.50 6.00 8.00 11.00 12.00 13.00 14.00
() CC = Special capacitor with reduced dimensions
Capacitors with CE marking and VDE-IMQ approval
71
Price List 50
ACCESSORIES
AR
ST1
FN, FH
MECHANICAL SEALS FOR SURFACE PUMPS MODEL
CODE
PUMP
MATERIALS Fixed ring
AR-12
PK60-65-70-80, PKS, PQ60-65, 11516101201 CP100-130-132, CP100-130-132 ST4, HF50, JSW1, JCR1
AR-12ST6
11516101214
CP100-ST6, CP130-ST6, CP132-ST6
AR-12V
11516101203
CK, CKR
AR-13
11516101301 2÷4CP, 2÷5CR, PLURIJET/60-80-100
AR-14
11516121401
CP150-158, CP150-158 ST4, HF4-5-51, NGA, 2CP25/130N, JSW2, JCR2
AR-14ST6
11516121404
CP150-ST6, CP158-ST6
AR-14S
11516141402
NGA-PRO
ST1-12
11516471200
PK90, PQ70-80-81-90, PV60-65-70-81-90 PQ60-65-81/Bs, PQA
ST1-12E
11516471201
PV55
FN-14
11516301401
PK100-200-300, PQ100-200-300
SHAFT
Rotating Elastomer Spring ring
1 pc.
10 pcs.
AISI304 Ø 12 mm
2.60
2.30
AISI316 Ø 12 mm
3.60
3.20
Ø 12 mm
5.50
5.10
AISI304 Ø 13 mm
3.50
3.00
Ø 14 mm
3.60
3.20
Ø 14 mm
4.50
4.00
Ø 14 mm
13.00
12.00
AISI316 Ø 12 mm
22.00
20.00
EPDM
Ø 12 mm
23.50
21.80
NBR
Ø 14 mm
5.50
5.00
1 pc.
5 pcs.
NBR
VITON Ceramic Graphite
NBR
VITON NBR
Silicon carbide Graphite
Ceramic
PRICE € each
FN-18
CP170-190-200, CP160, CP170-170M ST4, 11516301801 HF5M-6-70, 2CP25/14, 2CP25/16, 3-6CR, JSW3, PLURIJET/90-130-200, MK
Ø 18 mm
6.00
5.50
FN-18ST6
11516301810
CP170-ST6, CP170M-ST6
Ø 18 mm
7.50
6.50
FN-18 NU
11516301821
PQ3000
Ø 18 mm
10.50
9.50
FN-20
CP220B-C, CP230C, HF8-20, 2CP32/200, 11516302001 F-F4 32/160, F40/125, F-F4 40/160, F-F4 50/125
Ø 20 mm
7.50
6.50
FN-20 NUD
11516302030
Ø 20 mm
29.00
27.00
Ø 24 mm
9.50
8.50
Ø 24 mm
36.00
34.50
Ø 24 mm
95.00
90.00
Ø 32 mm
30.00
28.00
Ø 32 mm
50.00
48.00
Ø 35 mm
62.00
60.00
Ø 38 mm
50.00
48.00
NBR
FG32/160, FG40/160, FG50/125
FN-24 NUD
CP210, CP220A-AH, CP230B-A, CP250B-N, 11516302401 HF30, 2CP32/210, 2CP40/180, F-F4 32/200, F-F4 40/200, F-F4 50/160, F-F4 65/125 FG32/200, FG40/200, FG50/160, 11516302430 FG65/125
FN-24SV
11516302408
FN-24
Graphite Ceramic
F-INOX
Silicon carbide
Silicon carbide
AISI316 VITON
FN-32 NUD
CP250A-N, 2CP40/200, F-F4 50/200, 11516303220 F-F4 65/160, F-F4 65/200, F-F4 80/160, F-F4 100/160 FG50/200, FG65/160, FG65/200, 11516303230 FG80/160, FG100/160
FN-35 NUD
11516303530 FG32/250, FG40/250, FG50/250
FN-38
11516803801 F-F4 32/250, F-F4 40/250, F-F4 50/250
FN-40 NU
11516314010
F-F4 65/250, F-F4 80/200, F 80 /250B, F-F4 100/200, FG80/200A, FG100/200A
Ø 40 mm
69.00
65.00
FH-43 NU
11516314300
FG65/250, FG80/250, FG100/250
Ø 43 mm
250.00
247.00
FH-45 NU
11516314500
F-F4 80/250A, F-F4 100/250
Ø 45 mm
225.00
220.00
FN-32 NU
Graphite Ceramic
NBR
Special mechanical seals available on request
72
Price List 50
ACCESSORIES
AR, STA
ST1, MG1
MG1-D, ED560
ST4
MECHANICAL SEALS FOR SUBMERSIBLE PUMPS MODEL
CODE
PUMP
MATERIALS Fixed ring
SHAFT
Rotating Elastomer Spring ring
PRICE € each 1 pc.
10 pcs.
STA-12R
11516101250
TOP1-2-3, TOP FLOOR, TOP VORTEX, RX1-2-3, ZX
Ceramic Graphite
AISI304 Ø 12 mm
3.70
3.20
AR-12R LA
11516101245
TOP2-3LA
Ceramic
Graphite
AISI316 Ø 12 mm
4.30
3.80
STA-12R SIC
11516101248
RX2/20, RX3/20
Ceramic
Silicon carbide
AISI304 Ø 12 mm
11.00
10.00
STA-12R SG
11516101247
TOP MULTI 2-3, TOP MULTI-EVO 2-3 TOP MULTI-TECH 2-3
Silicon carbide
Graphite
AISI304 Ø 12 mm
7.30
6.40
STA-13R
11516101313
TOP MULTI 2-3, TOP MULTI-EVO 2-3 Ceramic TOP MULTI-TECH 2-3
Graphite
AISI304 Ø 13 mm
3.70
3.20
AR-14
11516121401
DAVIS
Ceramic
Graphite
AISI304 Ø 14 mm
3.60
3.20
ST1-14 SIC
11516151002
DAVIS, D30-N, DC30-N
Ceramic
Silicon carbide
AISI316 Ø 14 mm
13.00
12.00
11516152000
TOP4-5N, RX 4-5, RX 4-5/40, VX-ST, BC-ST, VX-MF, BC-MF, VX, BC, D8-10-20N, DC8-10-20N, VXC/35-45, MC/45, TR0.75-1.1
Silicon carbide – Silicon carbide
AISI316 Ø 14 mm
27.00
25.00
1 pc.
5 pcs.
MG1-14D SIC
NBR
Graphite – Silicon carbide
ST1-16
11516521600
NK, UP, 4BLOCK, FLUID SOLAR
Silicon carbide
Graphite
AISI316 Ø 16 mm
12.00
11.00
ST4-16
5PMR0700815
4PD
Ceramic
Graphite
AISI316 Ø 16 mm
8.00
7.50
STA-17
11516201705
NK, UP, 4BLOCK, FLUID SOLAR
Ceramic
Graphite
AISI316 Ø 17 mm
8.50
7.50
STA-19
11516601901
TR1.1-1.5-2.2, VXC/50-70, MC/50-70, VXC-F/50-70, MC-F/50-70
Silicon carbide
Silicon carbide
AISI304 Ø 19 mm
30.00
28.00
11516602000
TR1.1-1.5-2.2, VXC/50-70, MC/50-70, VXC-F/50-70, MC-F/50-70
Ceramic
Graphite
AISI304 Ø 20 mm
10.50
9.50
AISI304 Ø 25 mm
115.00
110.00
AISI316 Ø 25 mm
49.00
47.00
STA-20
NBR
ED560-25
11516172501
VX30-40-55/40, BC55-75/35
Ceramic Graphite – – Silicon Silicon carbide carbide
ST4-25
11539015
6PD
Ceramic
Graphite
Special mechanical seals available on request
73
Price List 50
ACCESSORIES
QEM
Control boxes for 4" single-phase submersible pumps
MODEL
CODE
MOTOR POWER (P�)
Single-phase
PRICE
kW
HP
CAPACITY
A
€
530ECN05A1
0.37
0.50
20 µF
5
40.50
QEM 075
530ECN07A1
0.55
0.75
25 µF
6
40.50
QEM 100
530ECN10A1
0.75
1
35 µF
7
40.50
QEM 150
530EC15A1
1.1
1.5
40 µF
11
40.50
QEM 200
530ECN20A1
1.5
2
60 µF
13
41.50
QEM 300
530EC30A1
2.2
3
75 µF
18
49.00
Single-phase 230 V 50 Hz
Control boxes for 4" and 6" three-phase submersible pumps
MODEL
CODE
MOTOR POWER (P�)
Three-phase
RATED CURRENT
QEM 050
QET
CAPACITOR
RATED CURRENT
PRICE
kW
HP
A
€
QET 050
530TNF05A
0.37
0.50
1.7
136.00
QET 075
530TNF07A
0.55
0.75
2
136.00
QET 100
530TNF10A
0.75
1
2.5
136.00
QET 150
530TNF15A
1.1
1.5
3.9
136.00
QET 200
530TNF20A
1.5
2
4.8
136.00
QET 300
530TNF30A
2.2
3
7
136.00
QET 400
530TNF40A
3
4
9
136.00
QET 550
530TNF55A
4
5.5
11.5
136.00
QET 750
530TNF75A
5.5
7.5
15.5
146.00
QET 1000
530AD100A
7.5
10
21.5
287.00
QET 1250
530AD125A
9.2
12.5
23.5
320.00
QET 1500
530AD150A
11
15
27.5
415.00
QET 2000
530AD200A
15
20
36
490.00
QET 2500
530AD250A
18.5
25
45
560.00
QET 3000
530AD300A
22
30
54
560.00
QET 4000
530AD400A
30
40
68
735.00
The control box has a selec tor for manual or automatic operation plus socket for float s witch (or pressure switch, etc.). Three-phase 400 V 50 Hz
74
Price List 50
ACCESSORIES
QSM
Control boxes for 4" single-phase pumps with level probes
MODEL
CODE
MOTOR POWER (P�)
Single-phase
Level probes
CAPACITY
A
€
0.37
0.50
20 µF
5
177.00
QSM 075
530MFLCN07A1
0.55
0.75
25 µF
6
177.00
QSM 100
530MFLCN10A1
0.75
1
35 µF
7
177.00
QSM 150
530MFLC15A1
1.1
1.5
40 µF
11
177.00
QSM 200
530MFLCN20A1
1.5
2
60 µF
13
187.00
QSM 300
530MFLC30A1
2.2
3
75 µF
18
300.00
The control box is equipped with a selector for manual or automatic operation (with float switch, pressure switch, etc.) and may be connected to level probes that protect the pump against dry running . Single-phase 230 V 50 Hz
Control boxes for 4"and 6" three-phase pumps with level probes CODE
MOTOR POWER (P�)
Three-phase
PRICE
530MFLCN05A1
MODEL
HP
RATED CURRENT
QSM 050
QST
Level probes
kW
CAPACITOR
RATED CURRENT
PRICE
kW
HP
A
€
QST 50
530TFLC05A
0.37
0.50
1.7
275.00
QST 75
530TFLC07A
0.55
0.75
2
275.00
QST 100
530TFLC10A
0.75
1
2.5
275.00
QST 150
530TFLC15A
1.1
1.5
3.9
275.00
QST 200
530TFLC20A
1.5
2
4.8
275.00
QST 300
530TFLC30A
2.2
3
7
275.00
QST 400
530TFLC40A
3
4
9
275.00
QST 550
530TFLC55A
4
5.5
11.5
275.00
QST 750
530TFLC75A
5.5
7.5
15.5
293.00
QST 1000
530ADL100A
7.5
10
21.5
425.00
QST 1250
530ADL125A
9.2
12.5
23.5
470.00
QST 1500
530ADL150A
11
15
27.5
510.00
QST 2000
530ADL200A
15
20
36
660.00
QST 2500
530ADL250A
18.5
25
45
735.00
QST 3000
530ADL300A
22
30
54
770.00
QST 4000
530ADL400A
30
40
68
895.00
The control box is equipped with a selector for manual or automatic operation (with float switch, pressure switch, etc.) and may be connected to level probes that protect the pump against dry running . Three-phase 400 V 50 Hz
75
Price List 50
ACCESSORIES
EVOLUTION
Electronic control box for submersible pumps
MODEL
CODE
EVOLUTION-MONO
532DOM003M
EVOLUTION-TRI/1
532DOM075T
EVOLUTION-TRI/2
532DOM100T
VOLTAGE
single-phase 230V 50/60 Hz three-phase 400V 50/60 Hz three-phase 400V 50/60 Hz
RATED CURRENT
PRICE
A
€
from 2 to 18
215.00
from 2 to 16
290.00
from 16 to 22
320.00
The control box contains a circuit board that makes it possible to adjust the limit at which the overload and shortcircuit protection intervenes; the circuit board also protects the pump against dry running by controlling the cos φ value without additional level probes. The control box may be connected to a float switch (or a pressure switch, etc.).
Spare electronic card for EVOLUTION-MONO (code 532DSC003M)
€ 160.00
Spare electronic card for EVOLUTION-TRI/1 (code 532DSC075T)
€ 160.00
Spare electronic card for EVOLUTION-TRI/2 (code 532DSC100T)
€ 180.00
QES
Control boxes for single-phase drainage pumps
MODEL
CODE
Single-phase
MOTOR POWER
CAPACITOR
RATED CURRENT
PRICE
kW
HP
CAPACITY
A
€
QES 300 MONO
52VX300A1
2.2
3
60 µF
16
225.00
QES 300 MONO-AL *
52VX300A1AL
2.2
3
60 µF
16
225.00
The control box is designed for connection to the thermal overload protector built into the motor windings of the VXCm 30, VXCm 30-F, MCm 30, MCm 30- F drainage pumps. Single-phase 230 V 50 Hz
() QES 300 MONO-AL, control box with contacts for connection to a level alarm auxiliary float switch
QES
Control boxes for three-phase drainage pumps
MODEL
CODE
Three-phase
MOTOR POWER (P�)
RATED CURRENT
PRICE
kW
HP
A
€
QES 150
532QES150A
1.1
1.5
4.2
150.00
QES 200
532QES200A
1.5
2
5.2
150.00
QES 300
532QES300A
2.2
3
6.5
150.00
QES 400
532QES400A
3
4
8
155.00
The control box is equipped with a selector for manual or automatic operation (with float switch) and is designed to be connected to the thermal overload protector built into the motor windings of the VXC, V XC-F, MC, MC-F drainage pumps. Three-phase 380 ÷ 415V 50 Hz
76
Price List 50
ACCESSORIES
QED1
Electronic control box for 1 drainage pump
MODEL
CODE
QED 1- MONO
533QED01M
QED 1- TRI
533QED01T
VOLTAGE
single-phase 230V 50/60 Hz three-phase 400V 50/60 Hz
RATED CURRENT
PRICE
A
€
from 2 to 18
190.00
from 2 to 9
260.00
The control box contains an electronic card that makes it possible to regulate the threshold at which the protection intervenes against overload currents and short-circuits. The control box is designed to be connected to the thermal overload protector built into the motor windings of the VXC, VXC-F, MC, MC-F drainage pumps and to three float switches (start-up, shut-off and alarm level).
Spare electronic card for QED 1- MONO (cod. 533QEDSC00M)
€ 150.00
Spare electronic card for QED 1- TRI (cod. 533QEDSC00T)
€ 160.00
QED2
Electronic control box for 2 drainage pumps
MODEL
CODE
QED 2- MONO
533QED02M
QED 2- TRI
533QED02T
VOLTAGE
single-phase 230V 50/60 Hz three-phase 400V 50/60 Hz
RATED CURRENT
PRICE
A
€
from 2 to 18
270.00
from 2 to 9
375.00
The control box contains an electronic card that makes it possible to regulate the threshold at which the protection intervenes against overload currents and short-circuits. The control box is designed to be connected to the thermal overload protector built into the motor windings of the VXC, VXC-F, MC, MC-F drainage pumps and to four float sw itches (alternate start-up of the f irst pump, alternate star tup of the second pump, shut-off and alarm level).
Spare electronic card for QED 2- MONO (cod. 533QEDSC01M)
€ 176.00
Spare electronic card for QED 2- TRI (cod. 533QEDSC01T)
€ 192.00
QE2
Electronic control box for pressure boosting sets CB2
MODEL
CODE
QE 2- MONO
54CB2SM2M030
QE 2- TRI/1
54CB2SM2T075
QE 2- TRI/2
54CB2SM2T100
VOLTAGE
single-phase 230V 50/60 Hz three-phase 400V 50/60 Hz three-phase 400V 50/60 Hz
RATED CURRENT
PRICE
A
€
from 2 to 18
225.00
from 2 to 12
330.00
from 2 to 16
370.00
The control box contains an electronic card that makes it possible to regulate the threshold at which the protection intervenes against overload currents and short-circuits. The control box is set to accept 2 pressure switch links (running first pump and second pump alternately) as well as one float switch ( for minimum water level ) to prevent dry running.
Spare electronic card for QE 2- MONO (cod. 54CB2SC020)
€ 145.00
Spare electronic card for QE 2- TRI/1, QE 2-TRI/2 (cod. 54CB2SC025)
€ 150.00
77
Price List 50
CABLE SIZES FOR SUBMERSIBLE MOTORS
SINGLE�PHASE 230 V - 50 Hz MOTOR POWER (P�) kW
HP
0.37 0.55 0.75 1.1 1.5 2.2
0.50 0.75 1 1.5 2 3
cable section in mm2 4x1
4 x 1.5
60 45 35 25
90 70 50 35 30
4 x 2.5 4x4 4x6 maximum cable length in metres 140 110 180 85 140 210 60 95 145 45 75 115 30 50 75
4 x 10
4 x 16
240 190 125
305 200
THREE�PHASE 230 V - 50 Hz MOTOR POWER (P�) kW
HP
0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9.2 11 13 15 18.5 22 30
0.50 0.75 1 1.5 2 3 4 5.5 7.5 10 12.5 15 17.5 20 25 30 40
cable section in mm2 4x1
4 x 1.5
4 x 2.5
100 83 65 48
152 126 99 72 53
255 210 165 120 88 60 47
4x4
4x6 4 x 10 4 x 16 maximum cable length in metres
338 265 192 142 97 73 55
405 292 215 147 110 83 60 45
485 360 245 183 138 100 73 64 54
392 295 220 160 114 100 87 75 65
4 x 25
4 x 35
4 x 50
4 x 70
385 275 220 190 164 144 114 95 70
395 315 270 236 205 162 137 102
378 330 287 225 190 142
4 x 25
4 x 35
4 x 50
4 x 70
585 470 405 350 305 245 205 152
490 430 340 285 210
485 410 305
570 425
510 380 275 195 157 135 117 102 82 69
THREE�PHASE 400 V - 50 Hz MOTOR POWER (P�) kW
HP
0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9.2 11 13 15 18.5 22 30
0.50 0.75 1 1.5 2 3 4 5.5 7.5 10 12.5 15 17.5 20 25 30 40
cable section in mm2 4x1 300 250 195 145 105 70 55 40
4 x 1.5
380 295 215 160 110 85 60 45 35
4 x 2.5
360 265 180 140 105 75 55 47 40
4x4
4x6 4 x 10 4 x 16 maximum cable length in metres
425 290 220 165 120 95 75 65 60 50
440 330 250 180 135 115 95 85 75 58 49 36
415 300 220 190 160 140 125 100 85 63
480 340 300 260 225 195 155 130 96
Voltage drop 3% - Maximum environment temperature + 30 °C
78
Price List 50
LOAD LOSS CHART (for straight pipes with 15-250 mm internal diameter and �ow rates from 8 to 8330 l/min) 100
/s m i n e e d s p t e r a W
50
30
20
10
e 4.6 5 p i p f o 3 s e r t 2 e m 0 0 1 h c 1 a e r o f s e 0.5 r t e m n i 0.3 s e s s 0.2 o L
0.1
0.05
0.03
0.02
0.01 8 0.5
16
30
50
83
160
330
500
830
1660
1
2
3
5
10
20
30
50
100
Flow rate
3330 5000 200
300
8330 Q l/min 500
3
Q m /h
The data in the table refers to cold water and other liquids with the same kinematic viscosity and new cast iron pipes. The load losses (hv) indicated in the table must be multiplied by: 0.8 for new steel pipes, 1.25 for old, slightly rusty iron pipes, and 1.7 for old pipes where the build-up of incrustation must be taken into account. EXAMPLE: Flow rate data Q = 500 l/min, new steel pipe Ø 80 mm, pipe length 50 m. Find the �ow rate on the horizontal axis and move vertically until you meet the DN 80 mm line. The corresponding load losses can thus be found on the vertical axis. hv = 4.6 m for every 100 m of pipe. hv1 = 4.6 x 0.8 = 3.68 m/100 (steel pipe). Considering the real length of the pipe: hv2 = 3.68 x 50:100 = 1.84 m (for 50 m of pipe). The �ow speed is determined by considering the position of the intersection point which is between the oblique lines with values of 1.5-2 m/sec. In the case being considered the result is approximately: C = 1.7 metres/sec
79
Price List 50
ORDER N. ______________________ Date________________ Client ______________________________________________ Address ____________________________________________ PEDROLLO S.p.A. 37047 San Bonifacio (Verona) ITALY - Via E. Fermi 7 Tel. +39 045 6136311 - Fax +39 045 7614663
[email protected] - www.pedrollo.com
ZIP Code ___________City _____________________________
Cap. Soc. € 60,000,000.00 int. vers. - Iscritta Registro Imprese VR n. 00451260236 C.C.I.A.A. 139573 VR - Cod. Fiscale/Part. IVA IT00451260236 - Mec. Imp. VR008908 Società con unico socio Società sottoposta alla direzione e coordinamento di PEDROLLO GROUP S.r.l.
E-mail ______________________________________________
Tel. _______________________Fax _____________________
VAT registration number ______________________________ Price list 50/2017
Qty
Delivery terms ________________________________________________________________________
Product description
e s a h p e l g n i S
e s a h p e e r h T
e l b a c d r a d n a t S
e l b ) e a l c b a l e i r v t a e a e r m e 0 h w 1 (
Notes
Extra notes
Form to be duplicated, �lled in and sent via FAX to +39 045 7614663 or via e-mail to
[email protected]
GENERAL SALES CONDITIONS 1) ORDERS AND ORDER ACCEPTANCE
Orders must clearly specify the exact name and type of product. Orders are understood to be binding only if they are con�rmed in writing by PEDROLLO S.p.A. 2) PRICES
Prices do not include V.A.T. Packing and shipping costs are invoiced at cost and are not bound by the offer or by the delivery contract but are subject to any cost increases which may take place before shipment. 3) DELIVERY TERMS
Although we shall do all in our power to meet them, the delivery terms indicated in our order con�rmation are understood to be indicative and not binding. PEDROLLO S.p.A. shall not be responsible for any damage caused by delays in delivery. PEDROLLO S.p.A. reserves the right to extend deliver y terms or to cancel the contract without any obligation to pay any indemnity in the following cases: a) Force majeure causes such as strikes, �res on our premises or in those of our suppliers, insufficient power or power failure or any other cause beyond our control. b) Difficulties in acquiring raw materials. c) Purchaser’s mistakes, errors or delays in providing us with the information necessar y to ful�l the order. d) Purchaser’s failure to comply with payment terms. e) Modi�cations of the order, even if we have accepted them after our order con�rmation. 4) DELIVERY
Goods are understood to be delivered when they are placed at the Customer’s disposal or handed over to the Carrier or Shipper. 5) SHIPMENT
Shipment is always understood to be undertaken on behalf of the purchaser and at his use, risk and peril, even when delivery is agreed “free to destination”. Claims for missing or damaged goods must always be �led by the consignee with the Shipper. We consider claims regarding change s in types or difference s in quantity are only taken into consideration if they are made in wr iting within 8 days from date of receipt of the goods. In the case of differences in quantity reference must be made to the gross weight of the package recorded on its arrival. Choice of the means of shipment, Carrier and Shipper, unless we receive speci�c instruc tions from the Customer, shall be an unquestionable prerogative of our Company. 6) PAYMENT
Payment of invoices must be made directly to our address, according to the procedures and terms indicated on the invoice itself. Any payments made to agents or representatives shall not be deemed to have been made until said sums reach the seller. When payment terms elapse without being honoured aninterest rate will be charged in accordance with the law , without any advance notice. We reserve the right, in case of delay in payment or failure to pay, to suspend manufacture and delivery of goods still on order, giving notice of this to the Customer. Said suspension shall not entitle to any kind of Compensation or claims, nor will it prejudice any of our other rights. No claims regarding goods under production or ready for shipment or already shipped or in the Customer’s possession shall relieve the latter from his obligation to take delivery of the entire quantity ordered and to make payments at the speci�ed expiry dates.
WARRANTY Pedrollo S.p.A. warrants for a 24 month period from the date of purchase, to be proven by dated proof of purchase, that the product will be free of material and construction defects. The warranty is valid for products produced within a maximum of 36 months, see the date on the data plate , and at the following conditions: 1) only products purchased from Pedrollo S.p.A. or resellers authorised by Pedrollo S.p.A. will be covered by this warranty; 2) the warranty does not include any failure resulting from errors in the connection to power supply, lack of adequate protection, defective installation, faulty handling and, however, inaccuracies in system operation. Pursuant to regulations on the sale of consumer goods (art. 1519-bis and following of the Italian Civil Code), it is hereby speci�ed that Pedrollo products should be installed by technically quali�ed personnel, as they are not designed to be installed by generic consumers. 3) this warranty does not include: - material failures resulting from corrosion or scraping of any kind caused by pumped liquids; - failure to work well due to bad installation; - failure to work well or product breakdown due to loads exceeding label limits; 4) in case of operation under warranty, Pedrollo S.p.A. only ensures repairing or replacing of the pump or device at their premises or one of our authorized service center and if recognized as defective, excluding any claim for damages and/or compensation. 5) allegedly defective product should be sent “carriage paid” to Pedrollo’s registered office or to an authorized service center. Pedrollo reserves a �nal decision on the reason of the failure and on how to repair or replace the device. Following the repairing or replacement, the device will be returned by Pedrollo “carriage forward” to the Customer. 6) this warranty decays if: 6a) the customer has failed to comply with payment terms; 6b) the equipment or part were tampered by any non authorised third party; 6c) the �aw and/or malfunction are not reported by the compulsory term of eight days. 7) Pedrollo S.p.A. do not sell dire ctly to purchas ers that may be quali�ed as consum ers pursuant to regu lations on “sale of consumer goods” (art. 1519-bis and following of the Italian Civil Code). If the main purchaser from Pedrollo S.p.A. (direct customer of Pedrollo S.p.A.) resells a product to a �nal purchaser that may be quali�ed as consumer pursuant to the above-mentioned law, Pedrollo S.p.A. warrants a withdrawal right pursuant to art. 1519-quinquies and following of the Italian Civil Code, without prejudice of the warranty conditions as per previous points 1-6, and at the following conditions: 7a) Pedrollo S.p.A. shall be informed by registered letter with advice of receipt by the compulsory term of 8 days since the �rst consumer's claim, under penalty of warranty decay; 7b) Pedrollo S.p.A. shall be informed in the same manner and under the same penalty as per point 7a above, about any customer's extra-judicial or judicial initiative; 7c) a withdrawal right will only be acknowledged if the customer's prompt reaction is either recognised by Pedrollo or ascertained by a Court along with the validity of this warranty pursuant to the conditions stated in all previous paragraphs. 7d) warranty conditions as per previous arts. 1-6 will also apply 8) Pedrollo S.p.A. reserves the right to make any changes with no previous notice; 9) In the event of disputes related to the persistence and operation of this warranty, and however related or consequent to this warranty, the Court placed in the same area as Pedrollo S.p.A. registered office will have exclusive jurisdiction. THIS PRICE LIST CANCELS AND REPLACES ALL PREVIOUS PRICE LISTS.