Parker (PVP16) Hydraulic Piston Pumps, Service Literature, Service Parts

Bulletin PM 1620-12-M1/USA

Hydraulics

LSHT-120A Parker Pumps Parts & Service

Effective 30,1992 Revi Re vise sed: d: November May Ma y 1998 1998

PVP Series Variable Volume Piston Pump Service Bulletin Model PVP16 **** 12


Parker Pumps Parts & Service Model PVP16 **** 12

WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled "Offer of Sale". C

Copyright 1998, Parker Hannifin Corporation, All Rights Reserved

2

Parker Hannifin Corporation

Bulletin PM 1620-12-M1/USA Table of Contents


Pump Cut-A-Way .................................................................................. 4 - 5 Control Options .......................................................................................... 6 Thru Shaft Options ..................................................................................... 7 Exploded View ..................................................................................... 8 - 9 Parts List

................................................................................. 10 - 11

Service Notes

........................................................................................ 12

Basic Troubleshooting.............................................................................. 12 Offer of Sale

........................................................................................ 15

Introduction: The PVP16 **** 12 series piston pumps are designed to provide long life while operating with Hydraulic Oil. Refer to catalog 1550/USA for limits. However, should maintenance be required, the following instructions should be used for disassembly, replacement of parts, cleaning and assembly.

Note: Prior to any pump disassembly, plug the open ports and clean all dirt from the outside of the pump. Prior to assembly all parts should be cleaned and then lightly coated with oil. Warning: Protective eye wear should be worn during all maintenance procedures.

3


Bulletin PM 1620-12-M1/USA Pump Cut-A-Way


Notes: 1. 2. 3. 4. 5.

Make sure "R" or "L" stamped on port plate (corresponding to rotation) is by antirotation pin. Installed depth of item 2 (trunnion pin) below surface of item 35 (housing) to be .050/.100 with swashplate clearance removed by pressing "in" on pin. Installed height of item 14 (servo post) above item 45 (rear cover) to be 1.538/1.534. Installed height of item 29 (needle bearing) above item 45 (rear cover) to be .150/.130. Illustration shows righthand (CW) rotation pump. Lefthand (CCW) pumps will have inlet and outlet ports reversed with compensator on outlet side.

4


Bulletin PM 1620-12-M1/USA Pump Cut-A-Way


5


Bulletin PM 1620-12-M1/USA Control Options


Notes: 1.

Must be used with proper compensator assembly. Horsepower (torque) control assembly does not include pressure compensator assembly. For "H" option use "M" compensator, for "C" option use "A" compensator.

6


Bulletin PM 1620-12-M1/USA Thru Shaft Options


Notes: 1. 2.

Shaft and cover assemblies not included in kits. They must be ordered separately. Later designs incorporate a gasket, P/N 801209 rather than an O-ring.

7


Bulletin PM 1620-12-M1/USA Pump Exploded View


Notes: 1. 2.

Illustration shows righthand (CW) rotation pump. Lefthand (CCW) pumps will have the compensator on opposite side, and port plate kidneys reversed. Seal kit (SKPVP16 - 12) consists of all O-rings, gaskets and shaft seal.

8


Bulletin PM 1620-12-M1/USA Pump Exploded View


9


Bulletin PM 1620-12-M1/USA Parts List


CAUTION These service parts are intended for use in hydraulic pumps. Incorrect installation or assembly of these parts could cause the pump or pumps being repaired to fail in subsequent use or to operate incorrectly. The following precautions should be followed: 1. All parts should be cleaned and then lightly coated with mineral oil, or another lubricating fluid compatible with the system fluid being used, prior to assembly. 2. The pump should be disassembled, repaired and reassembled in a clean environment. 3. Use proper tools to disassemble and reassemble the pump. 4. If you are uncertain at how to install these parts, you should obtain assistance either from a Parker Hannifin distributor, or from the Hydraulic Pump/Motor Division.

10


Bulletin PM 1620-12-M1/USA Parts List


Notes: 1. 2. 3. 4.

O-Ring compound designation =Nitrile, V = Viton. For proper operation of "H" control, it must be used with a remote compensator assembly. For proper operation of "C" control, it must be used with a load sense compensator assembly. Seal Kit P/N SKPVP 16 12 Rotation Group Kit P/N: RRKPVP16 12 R - CW L - CCW

11


Bulletin PM 1620-12-M1/USA Service Notes & Basic Troubleshooting


Service Notes: 











Use a clean lubricant (compatible with the working fluid) on all pump components during assembly. Most premature pump failures occur when contaminants from a previous failure have not been removed from the system, or cause for previous failure is still present (i.e. water in oil, filter bypassing, etc.) Thoroughly clean the reservoir, suction lines, suction strainer, drain lines, etc. before re-installing the pump. Always fill the pump case with clean fluid before starting a new or serviced pump for flooded suction, purge air from suction lines by cracking the inlet fitting or vent plug on pump. This should prevent an airlock condition and allow for faster priming. Starting the pump slowly by jogging (or turning over engine without allowing it to start) will help the pump prime and make it easier to determine when priming has occurred. Start pump with an open circuit whenever possible. Reduce the compensator to it's minimum setting during start-up. Cycle the pump on and off stroke while increasing the compensator to its required setting. This will assist in break-in of new components and help purge air from the case.

Basic Troubleshooting: Pump Will Not Prime Pump should prime within 30 seconds. If it does not, ∆ STOP. Check for proper drive rotation. ∆ Make sure pump shaft is turning (i.e. key at coupling ∆ hubs is engaged). Make sure reservoir is full. ∆ Check for major sources of a suction leak (vent plug ∆ open, shaft seal missing (PAVC), flange not tight, pinched O-Ring at flange or pump housing.

Can Only Build A Few Hundred PSI Compensator is backed all the way out. ∆ The remote or load sense line is vented. ∆ Control orifice or spool is plugged. ∆ Incorrect compensator spool (PVP). ∆ Pressure control dart is lodged open. ∆ Torque control plug is missing (PAVC). ∆ Pump Will Not Compensate Differential spring over-compressed (i.e. spring ∆ guide dislocated). Control drain line blocked (PAVC). ∆ Pressure control stem vent hole is plugged. ∆ Control spool travel is hindered. ∆ Control orifice is missing (PAVC). ∆ Saturation orifice is missing in load sense circuit. ∆

Cannot Build Any Pressure Make sure pump is primed. ∆ Check alignment, especially on PAVC pumps ∆ without "9" option. Make sure systems is not an open circuit. ∆ A pump produces flow, not pressure. It can only limit pressure when the system requirement is higher than the pump compensator setting.

12




Notes:

13




Notes:

14


Bulletin PM 1620-12-M1/USA Offer of Sale


The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.

1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance of Seller’s products shall in all events constitute such assent.

8. Buyer’s property: Any designs, tools, patterns, materials, drawings. Confidential information or equipment furnished by buyer, or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller‘s possession or control.

9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the 2. Payment: Payment shall be made by Buyer net 30 days from the amount hereof shall be in addition to amounts for the items sold. Buyer date of delivery of the items purchased hereunder. Amounts not timely paid agrees to pay all such taxes or to reimburse Seller therefore upon receipt of shall bear interest at the maximum rate permitted by law for each month or its invoice. If Buyer claims exemption from any sales, use or other tax portion thereof that the Buyer is late in making payment. Any claims by imposed by any taxing authority, Buyer shall save Seller harmless from and Buyer for omissions or shortages in a shipment shall be waived unless Seller against any such tax together with any interest or penalties thereon which receives notice thereof within 30 days after Buyer’s receipt of the shipment. may be assessed if the items are held to be taxable. 3. Delivery: Unless otherwise provided on the face hereof, delivery 10. Indemnity For Infringement of Intellectual Property Rights: shall be made F.O.B. Seller’s plant. Regardless of the method of delivery, Seller shall have no liability for infringement of any patents, trademarks, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. copyrights, trade dress, trade secrets or similar rights except as provided in Any delivery dates shown are approximate only and Seller shall have no this Part 10. Seller will defend and indemnify Buyer against allegations of liability for any delays in delivery. infringement of U.S. patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter “Intellectual Property Rights). Seller will 4. Warranty: Seller warrants that the items sold hereunder shall be defend at its expense and will pay the cost of any settlement or damages free from defects in material or workmanship for a period of 18 months from awarded in an action brought against Buyer based on an allegation that an date of shipment from Parker Hannifin Corporation. THIS WARRANTY item sold pursuant to this contract infringes the Intellectual Property Rights COMPROMISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO of a third party. Seller’s obligation to defend and indemnify Buyer is ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARcontingent on Buyer notifying Seller within ten (10) days after Buyer RANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSObecomes aware of such allegations of infringement, and Seller having sole EVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, control over the defense of any allegations or actions including all MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER negotiations for settlement or compromise. If an item sold hereunder is EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW. TRADE subject to a claim that it infringes the Intellectual Property Rights of a third USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. party, Seller may, at its sole expense and option, procure for Buyer the NOTWITHSTANDING THE FOREGOING, THERE ARE NO right to continue using said item, replace or modify said item so as to WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY make it noninfringing, or offer to accept return of said item and return the OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS. purchase price less a reasonable allowance for depreciation. Notwith5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM standing the foregoing, Seller shall have no liability for claims of OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS infringement based on information provided by Buyer, or directed to items CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR delivered hereunder for which the designs are specified in whole or part by REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE Buyer, or infringements resulting from the modification, combination or use PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT in a system of any item sold hereunder. The foregoing provisions of this SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL Part 10 shall constitute Seller’s sole and exclusive liability and buyer’s sole OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER. and exclusive remedy for infringement of Intellectual Property Rights. INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR If a claim is based on information provided by Buyer or if the IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD design for an item delivered hereunder is specified in whole or in part by HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF Buyer, buyer shall defend and indemnify Seller for all costs, expenses of CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, or judgments resulting from any claim that such item infringes any patent, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN trademark, copyright, trade dress, trade secret or any similar right. OR STRICT LIABILITY. 11. Force Majeure: Seller does not assume the risk of and shall 6. Changes, Reschedules and Cancellations: Buyer may request not be liable for delay or failure to perform any of Seller’s obligations by to modify the designs or specification for items sold hereunder as well as the reason of circumstances beyond the reasonable control of Seller (hereinafquantities and delivery dates thereof, or may request to cancel all or part of ter “Events of Force Majeure”). Events of Force Majeure shall include this order, however, no such requested modification or cancellation shall without limitation, accidents, acts of god, strikes or labor disputes, acts, become part of the contract between buyer and Seller unless accepted by laws, rules or regulations of any government or government agency, fires, Seller in written amendment to this Agreement. Acceptance of any such floods, delays or failures in delivery of carries or suppliers, shortages of requested modification or cancellation shall be at Seller’s discretion, and materials and any other cause beyond Seller’s control. shall be upon such terms and conditions as Seller may require. 12. Entire Agreement/Governing Law: The terms and conditions 7. Special Tooling: A tooling charge may be imposed for any special set forth herein, together with any amendments, modifications and any tooling, including without limitation, dies, fixtures, molds and patterns, different terms or conditions expressly accepted by Seller in writing, shall acquired to manufacture items sold pursuant to this contract. Such special constitute the entire Agreement concerning the items sold, and there are no tooling shall be and remain Seller’s property notwithstanding payment of any oral or other representation or agreements which pertain thereto. This charges byBuyer, in no event will Buyer acquire any interest in apparatus Agreement shall be governed in all respects by the law of the State of Ohio. belonging to Seller which is utilized in the manufacture of the items sold No actions arising out of the sale of the items sold hereunder or this hereunder, even if such apparatus has been specially converted or adapted Agreement may be brought by either party more than two (2) years after the for such manufacture and notwithstanding any charges paid by Buyer. cause of action accrues. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. FPG 9-91-P

15


Parker Hannifin Corporation Hydraulic Pump/Motor Division 2745 Snapps Ferry Road Greeneville, TN 37745 USA Tel. (423) 639-8151 FAX (423) 787-2418 Web site: http://www.parker.com 5/98 DBHESS 5000

Parker (PVP16) Hydraulic Piston Pumps, Service Literature, Service Parts

Recommend Documents