Gives an idea of High Pressure Heat Exchanger with special construction
lock boxFull description
learn how to pick a lock
literatureFull description
dead conceptusDeskripsi lengkap
inglesDescripción completa
El grimorío de la película "Evil Dead"Descripción completa
Dead FireFull description
Descripción: Presumption of Death (1)
Second Installment of Charlie Higson's horror series
research proposal for normincord
dead conceptusFull description
Project Report on digital security lock made by usin AT89S52 microcontroller and presented at CEPEX 2010 by students of HITEC University.
Otomomotif ModuleDeskripsi lengkap
Dead Reign, new zombies and OOCs
Instructions for Overriding Dead Lock Battery using the LPI/ELPS SAFLOK LPI/ELPS (Lock Programmer-Interrogator/Emergency Lock Power Supply )
Top View
Bottom View
The SAFLOK LPI/ELPS device is more frequ ently used for programming and interrogating locks. However, the device can also be used to open a lock that has a dead internal battery. Typically a lock with a dead battery will will not flash any lights after a keycard is used. If a lock displays flashing lights after a keycard is used, please consult your services manual for troubleshooting other conditions. SAFLOK System Requirements
1. 2. 3. 4. 5. 6.
LPI/ELPS device (Part # 74334) Male 25DB-Male 25DB parallel cable (Part # 7542380) 6 ‘ Download cable (part # 71982) Handheld module (Part # 701913 with Software Version # 031905 or greater) PC with a serial port and SAFLOK S AFLOK Client application (Version # 2.36 or greater) SAFLOK SL2500 ASIC or MT series locks (Software Version # 81305 or greater)
ELPS\LPI Instr. 1
Instructions for Overriding Dead Lock Battery using the LPI/ELPS
Procedure
1. Launch and then logon to the SAFLOK Client application. Select the Locks tab. Select the Program Locks button.
2. The Information box will appear. Before making a selection, connect one end of the download cable to the serial port on the PC and the other end to the handheld. Select OK on the Information box.
ELPS\LPI Instr. 2
Instructions for Overriding Dead Lock Battery using the LPI/ELPS
3. The Select LPI Command window will appear. Select the Override Lock Problem option and click the OK button.
4. The Ekey Selection window will appear. Click the Emergency key inside the box, and click the OK button.
ELPS\LPI Instr. 3
Instructions for Overriding Dead Lock Battery using the LPI/ELPS
5. The SAFLOK Client message box will appear. Click OK. At this point, the handheld is configured.
6. Now view the HH5 Main Menu screen on the handheld device. Press 2 on the keypad, which will move the cursor to 2.Take Unit to Locks , then press Enter. HH5 MAIN MENU 02-18-06 09:09AM DST 2. Take Unit to Locks 3. Setup Menu 7. Screen M254 will appear. Follow the screen instructions and then press Enter. Additionally, separate the handheld from its base, then take the handheld and LPI/ELPS to the lock
M254: Disconnect Terminal Cables and Connect LPI Probe **PRESS ANY KEY**
8. On the following screen, Press 6 that will move the cursor to 6. Send ELPS key . Press Enter. 02-18-06 09:09AM DST 5. Lock Vers/LED Diag 6. Send ELPS key Select Choice ?
9. Screen M252 will appear. Follow the on screen instruction by pressing Enter.
ELPS\LPI Instr. 4
Instructions for Overriding Dead Lock Battery using the LPI/ELPS M252: Press Any Key and then Insert LPI Probe into Lock! (Press ESC to Abort) 10. Screen M251 will display until the LPI/ELPS device is inserted into the lock. M251: Please Wait Programming the Lock
11. As soon as screen M236 appears turn the lock’s handle to open the door. M236: ELPS is powered and the lock is open Please turn handle Press Any Key 12. After the door has been opened, remove the LPI/ELPS device from the lock. Press Enter and then ESC on the handheld. The handheld will return to the following screen. Select 7. Disable ELPS key and then press Enter 02-18-06 09:10AM DST 6. Send ELPS key 7. Disable ELPS key Select Choice ? 13. At this point the ELPS feature has been disable and the handheld should be returned to its base. ****Warning***** The battery in the LPI/ELPS device will be drained of its power if connected to the handheld while the handheld is on its base charger. Please remove the LPI\ELPS device from the handheld when it’s not in use.
