Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1] Modified 07-FEB-2011 Type BULLETIN Status PUBLISHED
Oracle® E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 February 2011 See Change Record This document updates the following documentation with Linux x86-specific information for Oracle E-Business Suite Release 12 (12.1.1). Refer to the information contained here and to the appropriate manual when you install or upgrade your system. •
• •
Oracle E-Business Suite Installation Guide: Using Rapid Install (which is supplemented by Oracle Applications Release Notes and Oracle Applications NLS Release Notes ) Oracle E-Business Suite Upgrade Guide: Release 11i to Release 12.1.1
Oracle E-Business Suite Maintenance Pack (MP) Installation instructions
These documents respectively correspond to the following install/upgrade scenarios: • • •
New Installations of Release 12.1.1 using the EBS Rapid Install wizard Upgrades of EBS from versions 11i to 12.1.1 using the EBS Rapid Install wizard Upgrades of EBS from versions 12.0 (including 12.0 RUPs) to 12.1.1 using the Maintenance Pack (MP)
For Linux x86 installation and upgrade notes corresponding to the older Release 12.0.4 version, please see the My Oracle Support Document 402310.1. Specific steps in this document may be conditional depending on the scenario and will be highlighted as such. This document applies to 32-bit Linux operating systems on both the x86 and x86-64 hardware architectures. For Linux x86-64 (64-bit) operating systems on the x86-64 hardware architecture, see Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (My Oracle Support Doc 761566.1) - please note that there are separate distributions of Release 12.1.1 for the Linux x86 (32-bit) and Linux x86-64 (64-bit) platforms. Complete all operating system requirements, software requirements, and other requirements before installing or upgrading Oracle E-Business Suite
This document may be updated on a regular basis. Currently, it contains the following sections: • • • • • • • • •
Certification Information Operating Systems Requirements Software Requirements Other Requirements Before Installing or Upgrading Installing or Upgrading After Installing or Upgrading Change Record Documentation Accessibility
Certification Information The latest certification information for Oracle E-Business Suite Release 12 is available on My Oracle Support's Certification tab: http://support.oracle.com Operating Systems Requirements Oracle E-Business Suite is supported on various Linux 32-bit operating systems running on the x86 and x86-64 hardware architectures. Operating System Supported Versions The following table lists the supported operating system versions. Operating System Name
Supported Version
Oracle Linux
4 - Update 4 or higher (32-bit)
Oracle Linux
5 - Update 1 or higher (32-bit)
Red Hat Enterprise Linux
3 - Update 4 or higher (32-bit)*
Red Hat Enterprise Linux
4 - Update 4 or higher (32-bit)
Red Hat Enterprise Linux
5 - Update 1 or hgiher (32-bit)
S USE Linux Enterpri se Server
9 - SP3 or hi gher (32-bit) *
SUSE Linux Enterprise Server
10 - GA, SP1 or higher (32-bit)
*: only supported on the application (or middle) tier for upgrade customers in a multi-node system, or for both application and database tiers if the customer is on 10gR2. These OS'es are not supported for a new installation of 12.1.1 because version 11gR1 of the Database is delivered with Rapid Install and is not supported on these OS'es. Kernel Requirements The following table lists the required minimum kernel versions (to determine version, enter: $ uname -r): Operating System
Kernel
Oracle Linux 4
2.6.9-42.0.0.0.1.EL
Oracle Linux 5
2.6.18-8.el5PAE
Red Hat Enterprise Linux AS/ES 3
2.4.21-27.EL
Red Hat Enterprise Linux AS/ES 4
2.6.9-42.EL
Red Hat Enterprise Linux 5
2.6.18-8.el5PAE
SUSE Linux Enterprise Server 9
2.6.5-7.244
SUSE Linux Enterprise Server 10
2.6.16.21-0.8
Required Packages The following table lists the required packages and the minimum required versions for Linux (32-bit). Additional Information: Refer to your vendor's operating system installation manual or the operating system media for information on obtaining
and applying packages. Operating System
Oracle Linux 4*
Required Packages • • • • • • • • • • • •
glibc-2.3.4-2.25 glibc-common-2.3.4-2.25 binutils-2.15.92.0.2-21 compat-libstdc++-296-2.96-132.7.2 gcc-3.4.6-3 gcc-c++-3.4.6-3 libgcc-3.4.6-3 libstdc++-3.4.6-3 libstdc++-devel-3.4.6-3 openmotif21-2.1.30-11.RHEL4.6** pdksh-5.2.14-30.3 setarch-1.6-1
•
make-3.80-6.EL4 gnome-libs-1.4.1.2.90-44.1 sysstat-5.0.5-11.rhel4 compat-db-4.1.25-9 control-center-2.8.0-12.rhel4.5 xscreensaver-4.18-5.rhel4.11 libaio-0.3.105-2
•
libaio-devel-0.3.105
• • • • • •
Oracle Linux 5*
Update 1 (5.1) or higher of Oracle Linux 5 is required
Red Hat Enterprise Linux 5* (base and Advanced Platform)
Update 1 (5.1) or higher of Red Hat Enterprise Linux (RHEL) 5 is required The following i386 packages are not part of the OS distribution media and must be downloaded separately (from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux for both Oracle Linux 5 and RHEL 5) and i nstalled manually: • • •
•
•
openmotif21-2.1.30-11.EL5.i3861 xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386 For Update 1 or 2: o binutils-2.17.50.0.6-6.0.1.i3862 For Update 3: o binutils-2.17.50.0.6-9.0.1.i3862 For Update 4 (5.4) or higher, see workaround listed below in the 'After Installing or Upgrading' section.
The following i386 packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media: • • • • • • • • • • • •
compat-glibc-2.3.4-2.26 compat-glibc-headers-2.3.4-2.26 gcc-4.1.2-14.el5 gcc-c++-4.1.2-14.el5 glibc-2.5-123 glibc-common-2.5-123 glibc-devel-2.5-12 glibc-headers-2.5-12 kernel-headers-2.6.18-128.el5 libgcc-4.1.2-14.el53 libstdc++-devel-4.1.2-14.el5 libstdc++-4.1.2-14.el53
• • • • • • • •
make-3.81-1.13 gdbm-1.8.0-26.2.13 libXp-1.0.0-8.1.el5 libaio-0.3.106-3.23 libgomp-4.1.2-14.el5 sysstat-7.0.0-3.el5 compat-libstdc++-296-2.96-138 compat-libstdc++-33-3.2.3-61
Additionally, the following RPMs are required for an 11gR1 Database (which is bundled with t he 12.1.1 release) on the database tier: • • • • • •
elfutils-libelf-devel-0.125 elfutils-libelf-devel-static-0.125 libaio-devel-0.3.106 unixODBC-2.2.11 unixODBC-devel-2.2.11 kernel-headers-2.6
Note: 1
: The openmotif package version must be 2.1.30 (for example, openmotif-2.2.3-10.RHEL4.5 is not supported). : This GNU linker (ld) version 2.17 provided by Oracle is required for relinking the modules in Advanced Planning & Scheduling (MSC, MSO, MSR) and Profitability Manager (FEMCCE) 3 : This rpm is distributed as part of the 'default' installation of Enterprise Linux 2
Red Hat Enterprise Linux AS/ES 3*
• • • • • • • • • • • • • • •
glibc-2.3.2-95.27 glibc-common-2.3.2-95.27 binutils-2.14.90.0.4-35 compat-libstdc++-7.3-2.96.128 gcc-3.2.3-42 gcc-c++-3.2.3-42 libgcc-3.2.3-42 compat-gcc-7.3-2.96.128 compat-gcc-c++-7.3-2.96.128 libstdc++-3.2.3-42 libstdc++-devel-3.2.3-42 openmotif21-2.1.30-8** pdksh-5.2.14-21 setarch-1.3-1 make-3.79.1-17
•
gnome-libs-1.4.1.2.90-34.1 sysstat-4.0.7-4.EL3.3 compat-db-4.0.14-5 libaio-0.3.96-5
•
libaio-devel-0.3.96-5
• • •
Red Hat Enterprise Linux AS/ES 4*
•
glibc-2.3.4-2.25 glibc-common-2.3.4-2.25 binutils-2.15.92.0.2-21 compat-libstdc++-296-2.96-132.7.2 gcc-3.4.6-3 gcc-c++-3.4.6-3 libgcc-3.4.6-3 libstdc++-3.4.6-3 libstdc++-devel-3.4.6-3 openmotif21-2.1.30-11.RHEL4.6** pdksh-5.2.14-30.3 setarch-1.6-1 make-3.80-6.EL4 gnome-libs-1.4.1.2.90-44.1 sysstat-5.0.5-11.rhel4 compat-db-4.1.25-9 control-center-2.8.0-12.rhel4.5 xscreensaver-4.18-5.rhel4.11 libaio-0.3.105-2
•
libaio-devel-0.3.105-2
• • • • • • • • • • • • • • • • • •
SUSE Linux Enterprise Server 9
• • • • • • • • • • •
glibc-2.3.3-98.61 gcc-3.3.3-43.24 gcc-c++-3.3.3-43.24 libgcc-3.3.3-43.41 libstdc++-3.3.3-43.24 libstdc++-devel-3.3.3-43.24 openmotif21-libs-2.1.30MLI4-119.1** pdksh-5.2.14-780.7 make-3.80-184.1 gnome-libs-1.4.1.7-671.1 gnome-libs-devel-1.4.1.7-671.1
•
sysstat-5.0.1-35.1 binutils-2.15.90.0.1.1-32.10 db1-1.85-89 compat-2004.7.1-1.2 xscreensaver-4.16-2.6 libaio-0.3.102-1.2
•
libaio-devel-0.3.102-1.2
• • • • •
SUSE Linux Enterprise Server 10
Generaly Availability (GA) version of SLES 10 (10.0), or SLES 10 Service Pack 1 (10.1) or higher is required. The following 32-bit rpm packages must be installed from the SLES 10 distribution media: • • • • • • • • • • • • • • • •
binutils-2.16.91.0.5-23.4 compat-2006.1.25-11.2 compat-libstdc++-5.0.7-22.21 libstdc++-33.3.3.32 db1-1.85-101.2 gcc-4.1.0-28.4 gcc-c++-4.1.0-28.4 glibc-2.4-31.2 glibc-devel-2.4-31.2 libaio-0.3.104-14.2 libaio-devel-0.3.104-14.2 libgcc-4.1.0-28.4 libstdc++-4.1.0-28.4 libstdc++-devel-4.1.0-28.4 make-3.80-202.2 openmotif21-libs-2.1.30MLI4-143.2
Additionally, the following RPMs are required for an 11gR1 Database (which is bundled with t he 12.1.1 release) on the database tier: • • •
libelf-0.8.5 unixODBC-2.2.11 unixODBC-devel-2.2.11
Note: 1
: GA (10.0), SP1 (10.1) and SP2 (10.2) only. Starting in SP3, the compat-libstdc++-5.0.7 package has been replaced by libstdc++-33.3
2
: SP3 (10.3) and higher only
Footnotes: *After installing these patches, run ldconfig -v. **The openmotif package version numbering must be 2.1.30. For example, openmotif-2.2.3-10.RHEL4.5 is not supported.
JDK 6 Requirements JDK 6 is bundled with Oracle E-Business Suite version 12.1.1. Additional Information: Check the Sun Web site for any updates to the JDK 6 requirements for Linux (32-bit):
http://java.sun.com/javase/6/webnotes/install/jdk/install-linux.html#requirements Software Requirements The following maintenance tools must be installed on all machines, and their locations specified both in the PATH of the account that runs Rapid Install and in the PATH of the accounts that will own the database tier and application tier file systems. • • • • • • •
ar gcc g++ ld ksh make X Display Server
Other Requirements The following are other requirements for Linux (32-bit). Kernel Settings Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings.
Note: If the current value for any parameter is higher than the value listed in the following table, then do not change the value of that parameter.
The following table lists the kernel settings for Oracle Enterprise Linux 4 and 5, Red Hat Enterprise Linux AS/ES 3, 4, and 5 and SUSE Linux Enterprise Server 9 and 10: Parameter
Value
kernel.semmsl
256 1
kernel.semmns
32000 1
kernel.semopm
100 1
kernel.semmni
142 1
kernel.shmall
2097152
kernel.shmmax
Half the size of the physical memory (in bytes), and at least 2147483648 2
kernel.shmmni
4096
kernel.msgmax
8192
kernel.msgmnb
65535
kernel.msgmni
2878
fs.file-max
131072
net.ipv4.ip_local_port_range 10000 65000 3 net.core.rmem_default
262144
net.core.rmem_max
4194304
net.core.wmem_default
262144
net.core.wmem_max
262144
1
: set using the following entry in the /etc/sysctl.conf file: kernel.sem = 256 32000 100 142 : On the server running the EBS Database, this kernel parameter must be the lesser of half the size of the physical memory (in bytes) and 4294967295 3 : values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts. 2
Domain Name System (DNS) Resolver Parameters
Two Domain Name System (DNS) resolver parameters (timeout and attempts) are set by default to low values when the operating system is installed. These low values may cause attempted network connections to an Oracle database to fail. If this happens, add or update the following entries to these minimum settings in the /etc/resolv.conf file on each server node: options attempts:5 options timeout:15
Verifying Host Names Use the following to verify host name settings: For Oracle Linux 4 and 5, and Red Hat Enterprise Linux AS/ES 3, 4 and 5:
1. Verify that the /etc/hosts file is formatted as follows: 2. 127.0.0.1 localhost.localdomain localhost [ip_address] [node_name].[domain_name] [node_name]
3. Verify that the /etc/sysconfig/network file is formatted as follows: HOSTNAME=[node_name].[domain_name]
4. If the /etc/sysconfig/networking/profiles/default/network file exists, remove it. 5. If you changed any files in the previous steps, restart the system. For SUSE Linux SLES 9 and 10:
1. Verify that the /etc/hosts file is formatted as follows: 2. 127.0.0.1 localhost.localdomain localhost [ip_address] [node_name].[domain_name] [node_name]
3. If you changed any files in the previous step, restart the system. Modifying the Number of Open File Descriptors Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes. Note: If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter. * hard nofile 65535
* soft nofile 4096 * hard nproc 16384 * soft nproc 2047
OS Library Patch for Oracle HTTP Server (on Oracle Linux 5 and RHEL 5 only) Download and apply the patch 6078836 from My Oracle Support to fix an issue with the Oracle HTTP Server (missing libdb.so.2) bundled with the E-Business Suite technology stack. Note that this patch (which includes a required operating system library) must be applied before installing Oracle E-Business Suite. Link to Motif library for Oracle Application Server 10.1.2 (on Oracle Linux 5 and RHEL 5 only) Perform the following command (as root on your system) to update a required link to a Motif library prior to relinking or patching the 10.1.2 Application Server Oracle Home: # unlink /usr/lib/libXtst.so.6 # ln -s /usr/X11R6/lib/libXtst.so.6.1 /usr/lib/libXtst.so.6
Without this updated link, you may see the following errors during a relink of the 10.1.2 Oracle Home: /usr/lib/libXtst.so.6: undefined reference to /usr/lib/libXtst.so.6: undefined reference to /usr/lib/libXtst.so.6: undefined reference to
`__stack_chk_fail@GLIBC_2.4' `__fprintf_chk@GLIBC_2.3.4' `__sprintf_chk@GLIBC_2.3.4'
Since the ldconfig command overrides this link, the above link command (ln) will have to be re-issued after running the ldconfig command. Before Installing or Upgrading If the Release 12.1.1 installation or upgrade is performed with the Rapid Install wizard (either a new R12 installation or upgrade from 11i to R12), ensure you have the latest Rapid Install patch as described in Oracle Applications Release Notes, Release 12.1.1 (My Oracle Support Doc 798258.1) before you begin your installation or upgrade. Complete all operating system requirements, software requirements, and other requirements before installing or upgrading Oracle E-Business Suite. OPMN port conflict Attention: By default, the OPMN service of the Application Server technology stack listens on port 6000 when started up during Rapid Install. This
can conflict with the X11 port used for the graphics console on Linux servers and prevent Rapid Install from completing.
To address this issue, perform the following steps before installing or upgrading: • •
Check if the port 6000 is being used ("netstat -a | grep 6000") If so, you should disable the graphics console login process on the Linux server. This can be accomplished by logging in as root and issuing the following commands: o Find the process that uses port 6000 by the command "lsof -i TCP:6000". o Use "kill -9" to abort the process found in the previous step o Confirm that nothing is listening at port 6000 ("netstat -a | grep 6000") o Modify /etc/inittab by changing "id:5:initdefault:" to "id:3:initdefault:" o Run "/sbin/init 3" to restart dtlogin
Unset environment variable before installing (for SLES 10 only) Unset the ENV environment variable prior to installing (to avoid failure of the registration of the 10.1.2 Oracle Home during install): $ unset ENV
Installing or Upgrading Perform the installation or upgrade following the documentation ( Oracle E-Business Suite Installation Guide: Using Rapid Install , Oracle EBusiness Suite Upgrade Guide: Release 11i to Release 12.1.1 or Oracle E-Business Suite Release 12.1.1 Maintenance Pack instructions) relevant to the specific installation or upgrade scenario described above. After Installing or Upgrading Perform the following steps after installing or upgrading to Release 12.1.1 and before allowing users to access the system. Relink Advanced Supply Chain Planning executables (for SLES 10 and Oracle Linux/RHEL 5.4 or higher only) During the relink phase of the installation of EBS Release 12 (12.1.1) on SLES 10 or Oracle Linux/RHEL 5.4 (Update 4 or higher), failures will result while relinking the Advanced Supply Chain Planning (ASCP) executables. To fix this problem, users are required to replace the following line under the Linux section of the $AD_TOP/bin/adrelinknew.sh: CPP_LDFLAGS=' -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -lclntsh'
with
CPP_LDFLAGS=' -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -lclntsh -Wl,--noinhibit-exec'
After making this change, users are then required to run the adadmin utility and relink application executables. Additional Information: The application of an EBS Release Update Pack (RUP) or AD family pack could over-write the adrelinknew.sh file - users
must then re-edit and make changes to the above file in order to avoid relinking failures.
LD_LIBRARY_PATH Environment Variable Dynamic libraries are used as part of the relinking and execution processes. The LD_LIBRARY_PATH environment variable is used by Oracle EBusiness Suite to locate the required dynamic libraries at runtime - this variable is set by the Rapid Install wizard during the installation of EBS as well as by the Rapid Clone script (adcfgclone) when configuring the target system. If you need to change these values, use the Edit Parameters function of the OAM AutoConfig tool (by logging in as 'System Administrator' responsibility, clicking on 'System Administrator', selecting 'AutoConfig' under 'Oracle Applications Manager', and clicking on the 'Environments' tab): On each application tier server node:
LD_LIBRARY_PATH is set in three places: • • •
$APPL_TOP/admin/adovars.env $ORA_CONFIG_HOME/10.1.2/[CONTEXT_NAME ].env, in the 10.1.2 Oracle home directory $ORA_CONFIG_HOME/10.1.3/[CONTEXT_NAME ].env, in the 10.1.3 Oracle home directory
In the AutoConfig interface, this corresponds to: Location
Parameter
adovars
LD_LIBRARY_PATH
tools_home (10.1.2) LD_LIBRARY_PATH web_home (10.1.3)
LD_LIBRARY_PATH
On the database server node:
LD_LIBRARY_PATH is set in $ORACLE_HOME/[CONTEXT_NAME ].env which corresponds in the AutoConfig interface to:
Location
Parameter
db_home LD_LIBRARY_PATH
After making these changes, run A utoConfig (adautocfg.sh) to implement the changes on the application and database tiers. Additional Information: See AutoConfig in Oracle E-Business Suite Maintenance Utilities for more information on AutoConfig.
Net Service Listeners in Multi-user Installations Net Service Listeners use the /var/tmp.oracle directory to store temporary files. To give all users in a multi-user installation write privileges, update /var/tmp/.oracle with 777 permissions: $ chmod 777 /var/tmp/.oracle
Change Record The following sections were changed in this document. Date
Summary of Changes
07-Feb2011
Added compat-glibc-headers-2.3.4-2.26, glibc-headers-2.5-12 and kernel-headers-2.6.18-128.el5
20-Jan2011
Added note about the need to re-edit the adrelinknew.sh file if it i s overwritten during the application of a RUP or AD family pack.
15-Oct2010
Added opmn port conflict workaround
14-Sep2010
Added clarification of shmmax kernel parameter on the db tier
16-Jul2010
Added Profitability Manager as a product requiring ld version 2.17 for OEL/RHEL 5
1-Jul-2010 Clarified that LD_LIBRARY_PATH is also set by Rapid Clone when configuring the target system. 25-Jun2010
Added note that SLES 10 SP3 replaced compat-libstdc++ with libstdc++; cleaned up references of 'Oracle Applications' to 'Oracle E-Business Suite'; cleaned up description of LD_LIBRARY_PATH setting
23-Mar2010
Added clarification that the HTTP Server patch from AS must be applied before installing EBS.
13-Oct2009
Added workaround for OEL/RHEL 5 Update 4 (5.4) to relink ASCP
03-Aug2009
Added binutil version requirement for RHEL5/OEL5 Update 3 (5.3)
27-Apr2009
Initial publication of 12.1.1 IUN - f or the older 12.0.4 IUN changes, please see My Oracle Support Doc 402310.1
Documentation Accessibility Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For additional information, visit the Oracle Accessibility Program Web site at: http://www.oracle.com/accessibility/ Accessibility of Code Examples in Documentation JAWS, a Windows screen reader, may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, JAWS may not always read a line of text that consists solely of a bracket or brace. Accessibility of Links to External Web Sites in Documentation This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites. TTY Access to Oracle Support Services Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, 7 days a week. For TTY support, call 800.446.2398. Outside the United States, call +1.407.458.2479.
Oracle E-Business Suite Installation and Upgrade Notes, Release 12 (12.1.1) for Linux (32-bit) Copyright © 2009, Oracle. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065. This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications. This software and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third party content, products or services.
Related Products •
Errors
XP-1
Oracle E-Business Suite > Applications Technology > Lifecycle Management > Oracle Application Install
Back to top Rate this document
Article Rating Rate this document
Comments Provide feedback f or this article. Please use 'Contact Us' f or other f eedback.
Excellent Good Poor Did this document help you?
Yes No Just browsing How easy was it to find this document?
Very easy Somewhat easy Not easy Cancel
Important Note: this feedback may be anonymously visible to other customers until processed by Oracle Support.
