MHA Parameters active (Active) Parameter name Active Abbreviated active name 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Defines MHA as AISG MHA or Non-AISG Description MHA. Selectable values is 0 (false)= Non-AISG MHA and 1 (true )= AISG MHA . Range false (0), true (1) Step Unit false => 0 Formula for true => 1 getting internal value Default value Default value notes Related functions System information Modification BTS restart needed mhaType of MHA - If Active parameter value is Related false there is relation to MHA type and delay parameters values used in RTT (antennaRoundTripDelay). Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
Table 105: Active aisgProtocol (AISG protocol version) Parameter name AISG protocol version Abbreviated name aisgProtocol 3GPP name Managed object MHA Parameter group Category Multiplicity 1 AISG protocol version Note: Parameter is not seen in upload file in Description this release, because BTS SW is not providing those due to feature content change. Range 2...255 Step 1 Unit Formula for getting internal internal_value = gui_value value Default value Default value notes Related functions System information Modification Not modifiable Related parameters Parameter relationships RAN1852 RET Device Naming Feature (standard) dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 106: AISG protocol version alarmThresholdLevel (Fault threshold level)
Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies
Fault threshold level alarmThresholdLevel MHA 1 Defines a configurable fault threshold level for the mast-head amplifier, used if the MHA fault detection parameter has the value 1 (in use). Default value is depending on Flexi Filter (FF). 120...775 1 mA internal_value = gui_value 165 mA BTS restart needed
Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 107:
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
Fault threshold level
antBandList (Antenna band list) Parameter name Antenna band list Abbreviated name antBandList 3GPP name Managed object MHA Parameter group Category Multiplicity 4 A list containing: operating frequency band, Description beamwidth and the operation gain antBeamwidth antOperFreqBand Child parameters antOperGain Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships
On-Line -
Feature dependencies
Interfaces
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
-
Table 108: Antenna band list antBeamwidth (Antenna beamwidth) Parameter name Antenna beamwidth Abbreviated antBeamwidth name 3GPP name Beamwidth in each operating band in band order
Managed object Parameter group Category Multiplicity
Description
Range Step Unit Formula for getting internal value Default value Default value notes Special value Related functions System information Modification Related parameters Parameter relationships Feature dependencies
MHA 1 The antenna beamwidth for the band. Some RET types may automatically update the beamwidth information based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field. 0...360 1 deg internal_value = gui_value 0 = unused (0) On-Line -
Interfaces
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
-
Table 109: Antenna beamwidth antOperFreqBand (Antenna operating frequency band)
Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity
Antenna operating frequency band antOperFreqBand
Antenna operating band(s) MHA 1 Antenna operating band(s): 1 - 3GPP band I: 2100 MHz 2 - 3GPP band II: 1900 MHz 3 - 3GPP band III: 1800 MHz 4 - 3GPP band IV: 1700 MHz 5 - 3GPP band V: 850 MHz 6 - 3GPP band VI: 800 MHz Description 7 - 3GPP band VII: 2600 MHz 8 - 3GPP band VIII: 900 MHz 9 - 3GPP band IX: 1800 MHz 10 - 3GPP band X: 1700 MHz 11 - 3GPP band XI: 1500 MHz 12 - 3GPP band XII: 700 MHz 13 - 3GPP band XIII: 700 MHz 14 - 3GPP band XIV: 700 MHz Band I (1), Band II (2), Band III (3), Band IV (4), Band V (5), Band VI (6), Band VII (7), Range Band VIII (8), Band IX (9), Band X (10), Band XI (11), Band XII (12), Band XIII (13), Band XIV (14) Step Unit gui ==> internal Band I ==> 1 Band II ==> 2 Band III ==> 3 Band IV ==> 4 Band V ==> 5 Formula for Band VI ==> 6 getting internal Band VII ==> 7 value Band VIII ==> 8 Band IX ==> 9 Band X ==> 10 Band XI ==> 11 Band XII ==> 12 Band XIII ==> 13 Band XIV ==> 14 Default value Default value notes
Related functions System information Modification Related parameters Parameter relationships Feature dependencies
On-Line -
Interfaces
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
-
Table 110: Antenna operating frequency band antOperGain (Antenna operation gain) Parameter name Antenna operation gain Abbreviated antOperGain name 3GPP name Gain in each operating band in band order Managed object MHA Parameter group Category Multiplicity 1 The antenna gain for the band. Some RET types may automatically update the gain information Description based on the configuration data downloaded into the RET device. Some devices may also restrict ovewriting the field. Range 0...25.5 Step 0.1 Unit dBi Formula for getting internal internal_value = gui_value * 10 value
Default value Default value notes Special value Related functions System information Modification Related parameters Parameter relationships Feature dependencies
0 = unused (0) On-Line -
Interfaces
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
-
Table 111: Antenna operation gain antBearing (Antenna bearing) Parameter name Antenna bearing Abbreviated name antBearing 3GPP name Antenna Bearing Managed object MHA Parameter group Category Multiplicity 1 Description Antenna Bearing Range 0...359.9 Step 0.1 Unit deg Formula for getting internal_value = gui_value * 10 internal value Default value Default value notes -
Related functions System information Modification Related parameters Parameter relationships Feature dependencies
On-Line RAN1852 RET Device Naming (standard)
Interfaces
References
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 112: Antenna bearing antModel (Antenna model number) Parameter name Antenna model number Abbreviated name antModel 3GPP name Antenna model number Managed object MHA Parameter group Category Multiplicity 1 Description Antenna model number Range 0...15 Step Unit characters Formula for getting internal_value = gui_value internal value Default value Default value notes Related functions System information Modification On-Line Related parameters Parameter relationships RAN1852 RET Device Naming Feature dependencies (standard)
Interfaces
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name -
Table 113: Antenna model number antSerial (Antenna serial number) Parameter name Antenna serial number Abbreviated name antSerial 3GPP name Antenna serial number Managed object MHA Parameter group Category Multiplicity 1 Description Antenna serial number Range 0...17 Step Unit characters Formula for getting internal_value = gui_value internal value Default value Default value notes Related functions System information Modification On-Line Related parameters Parameter relationships RAN1852 RET Device Naming Feature dependencies (standard)
Interfaces
References Location in RNC GUI RAC DB Table
-
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
RAC DB Column RAC user interface name Table 114: Antenna serial number antlId (Antenna line identifier) Parameter name Antenna line identifier Abbreviated name antlId 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Identifies the specific antenna line assigned Description to the MHA. Range 1...18 Step 1 Unit Formula for getting internal_value = gui_value internal value Default value Default value notes Related functions System information Modification BTS restart needed antlId of ANTL - Identifies the specific Related parameters antenna line id assigned to the MHA. Parameter Identifies the specific antenna line id relationships assigned to the MHA. Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 115: Antenna line identifier baseStationID (Base station ID) Parameter name Base station ID Abbreviated name baseStationID 3GPP name Base Station ID Managed object MHA
Parameter group Category Multiplicity Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies
1 Base Station ID 0...32 characters internal_value = gui_value On-Line RAN1852 RET Device Naming (standard)
Interfaces
References
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 116: Base station ID connection (Connection) Parameter name Connection Abbreviated name connection 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Defines the connection type for MHA/LNA. Description Expected values: Internal | Shared | External Range Internal (0), Shared (1), External (2) Step Unit -
gui ==> internal Formula for getting Internal ==> 0 internal value Shared ==> 1 External ==> 2 Default value Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
-
Table 117: Connection downlinkDelay (Downlink delay) Parameter name Downlink delay Abbreviated downlinkDelay name 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Defines the "other" type of MHA delay in the downlink direction. If the BTS Site Manager is Description used to calculate RTT delay, this value must be specified for an "Other" type MHA. Range 0...1000 Step 1 Unit ns Formula for getting internal internal_value = gui_value value
Default value Default value notes Related functions System information Modification
Related parameters
Parameter relationships Feature dependencies
0 ns BTS restart needed antennaRoundTripDelay of ANTL - Delays from passive mode MHA is added to antennaRoundTripDelay value by formula defined in antennaRoundTripDelay parameter description. mhaType of MHA - When passive mode "other" type MHA is used, Downlink delay needs to be defined other cases keep empty.
Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
-
Table 118: Downlink delay gainResolution (Gain resolution) Parameter name Gain resolution Abbreviated name gainResolution 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Gain resolution given as the gain resolution figure expressed in dB. Description Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature content change.
Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships
0...99 0.01 dB internal_value = gui_value * 100 Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 119: Gain resolution installDate (Installation date) Parameter name Installation date Abbreviated name installDate 3GPP name Installation Date Managed object MHA Parameter group Category Multiplicity 1 Description Installation Date Range 0...6 Step Unit characters Formula for getting internal_value = gui_value internal value
Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies
On-Line RAN1852 RET Device Naming (standard)
Interfaces
References
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 120: Installation date installerID (Installers ID) Parameter name Installers ID Abbreviated name installerID 3GPP name Installer's ID Managed object MHA Parameter group Category Multiplicity 1 Description Installer's ID Range 0...5 Step Unit characters Formula for getting internal_value = gui_value internal value Default value Default value notes Related functions System information Modification On-Line Related parameters Parameter relationships Feature dependencies RAN1852 RET Device Naming
(standard)
Interfaces
References
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 121: Installers ID lnaNumber (LNA number) Parameter name LNA number Abbreviated name lnaNumber 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Parameter for MHA telling LNA number Description inside one MHA. For Non AISG MHAs is used -1 (not defined). Range Not Defined (-1), LNA1 (0), LNA2 (1) Step Unit gui ==> internal Formula for getting Not Defined ==> -1 internal value LNA1 ==> 0 LNA2 ==> 1 Default value Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships Feature dependencies EM <-> WBTS Interfaces WBTS <-> RAC
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAC <-> RACApp
-
Table 122: LNA number maxGain (Maximum supported gain) Parameter name Maximum supported gain Abbreviated name maxGain 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Maximum supported gain given as gain figure expressed in dB. Description Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature content change. Range 0...99 Step 0.01 Unit dB Formula for getting internal internal_value = gui_value * 100 value Default value Default value notes Related functions System information Modification Not modifiable Related parameters Parameter relationships RAN1852 RET Device Naming Feature (standard) dependencies Interfaces
WBTS -> RAC
References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
3GPP Reference: AISG v.2.0
-
Table 123: Maximum supported gain mhaAlarmDetection (MHA fault detection) Parameter MHA fault detection name Abbreviated mhaAlarmDetection name 3GPP name Managed MHA object Parameter group Category Multiplicity 1 Defines if fault detection is used or not. The options are 0 (false) and 1 (true). Default values for Non-AISG MHAs and AISG MHAs in Description passive mode: 1 Default values for AISG and third party MHAs:0 Note: Configurable MHA faults are allowed only for passive MHAs Range false (0), true (1) Step Unit false => 0 Formula for true => 1 getting internal value Default value Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships
Feature dependencies
Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
-
Table 124: mhaGain (MHA gain) Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies Interfaces References Location in RNC GUI
MHA fault detection MHA gain mhaGain MHA 1 Defines the gain of the mast-head amplifier. 0...99 0.01 dB internal_value = gui_value * 100 BTS restart needed EM <-> WBTS WBTS <-> RAC RAC <-> RACApp -
RAC DB Table RAC DB Column RAC user interface name
-
Table 125: MHA gain mhaId (MHA identifier) Parameter name MHA identifier Abbreviated name mhaId 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Defines the specific mast-head amplifier unit. Description The value is given as consecutive numbers starting from 1. Range 1...255 Step 1 Unit Formula for getting internal_value = gui_value internal value Default value Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
-
Table 126: mhaType (MHA type) Parameter MHA type
MHA identifier
name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity
mhaType MHA -
1 Defines the type of the MHA. The supported MHA types are: WMHA, WMHB, WMHC, WMHD, MDTA, MDPA, MDGA, MDDA, FLJA, DTMAFV1, DTMAFV3, DTMAFV4, Description DTMARETFV1, DTMARETFV2, DTMARETFV3, DTMARETFV4, SDTMARETFV1, SDTMARETFV2, SDTMARETFV3, TMAFV1, TMAFV3, TMAFV4, TMARETFV1 and other. WMHA (0), WMHB (1), WMHC (2), WMHD (3), MDTA (4), MDPA (5), MDGA (6), MDDA (7), FLJA (8), DTMAFV1 (9), DTMAFV3 (10), DTMAFV4 (11), DTMARETFV1 (12), Range DTMARETFV2 (13), DTMARETFV3 (14), DTMARETFV4 (15), SDTMARETFV1 (16), SDTMARETFV2 (17), SDTMARETFV3 (18), TMAFV1 (19), TMAFV3 (20), TMAFV4 (21), TMARETFV1 (22), Other (23) Step Unit gui ==> internal WMHA ==> 0 WMHB ==> 1 WMHC ==> 2 WMHD ==> 3 MDTA ==> 4 MDPA ==> 5 MDGA ==> 6 Formula for MDDA ==> 7 getting internal FLJA ==> 8 value DTMAFV1 ==> 9 DTMAFV3 ==> 10 DTMAFV4 ==> 11 DTMARETFV1 ==> 12 DTMARETFV2 ==> 13 DTMARETFV3 ==> 14 DTMARETFV4 ==> 15 SDTMARETFV1 ==> 16
SDTMARETFV2 ==> 17 SDTMARETFV3 ==> 18 TMAFV1 ==> 19 TMAFV3 ==> 20 TMAFV4 ==> 21 TMARETFV1 ==> 22 Other ==> 23 Default value Default value notes Related functions System information Modification BTS restart needed antennaRoundTripDelay of ANTL - RTT delay default values for Nokia MHAs is defined in antennaTripDelay parammeter description. Only "other" - type of MHAs delay value needs to be defined. active of MHA - Only passsive mode MHAs delay Related values needs to be defined. Delay from active parameters mode Nokia MHA is not added to RTT delay. downlinkDelay of MHA - When passive mode "other" type MHA is used, Downlink delay needs to be defined other cases keep empty. uplinkDelay of MHA - When passive mode "other" type MHA is used, Uplink delay needs to be defined other cases keep empty. Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 127:
MHA type
minGain (Minimum supported gain) Parameter name Minimum supported gain Abbreviated name minGain 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Minimum supported gain given as gain figure expressed in dB. Description Note: Parameter is not seen in upload file in this release, because BTS SW is not providing those due to feature content change. Range 0...99 Step 0.01 Unit dB Formula for getting internal internal_value = gui_value * 100 value Default value Default value notes Related functions System information Modification Not modifiable Related parameters Parameter relationships RAN1852 RET Device Naming Feature (standard) dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 128: prodCode (Product code)
Minimum supported gain
Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
Product code prodCode MHA 1 Defines the product code of the unit in question. 1...80 characters internal_value = gui_value BTS restart needed EM <-> WBTS WBTS <-> RAC RAC <-> RACApp -
Table 129: Product code releaseId3Gpp (3GPP realese ID) Parameter name 3GPP realese ID Abbreviated name releaseId3Gpp 3GPP name Managed object MHA Parameter group Category Multiplicity 1 3GPP protocol version Note: Parameter is not seen in upload file in Description this release, because BTS SW is not providing those due to feature content change.
Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships
0...255 1 internal_value = gui_value Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: 3GPP TS 25.463
-
Table 130: 3GPP realese ID scannedAntennaInterface (Scanned antenna interface) Parameter Scanned antenna interface name Abbreviated scannedAntennaInterface name 3GPP name Managed MHA object Parameter group Category Multiplicity 1 Defines which antenna interface is scanned. Description Expected value: FRx-ANTx and empty string
where FRx: 1...3 and ANTx: 1...6 It is depending on radio module type which antennas are capable for scanning / AISG device detection. NONE (-1), FR1-ANT1 (0), FR1-ANT3 (1), FR1-ANT5 (2), FR2-ANT1 (3), FR2-ANT3 (4), Range FR2-ANT5 (5), FR3-ANT1 (6), FR3-ANT3 (7), FR3-ANT5 (8) Step Unit gui ==> internal NONE ==> -1 FR1-ANT1 ==> 0 FR1-ANT3 ==> 1 Formula for FR1-ANT5 ==> 2 getting internal FR2-ANT1 ==> 3 value FR2-ANT3 ==> 4 FR2-ANT5 ==> 5 FR3-ANT1 ==> 6 FR3-ANT3 ==> 7 FR3-ANT5 ==> 8 Default value Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 131:
Scanned antenna interface
sectorID (Sector ID) Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies
Sector ID sectorID Sector ID MHA 1 Sector ID 0...32 characters internal_value = gui_value On-Line RAN1852 RET Device Naming (standard)
Interfaces
References
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
3GPP Reference: 3GPP TS 25.463
Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name Table 132: serNum (Serial number) Parameter name Abbreviated name 3GPP name Managed object Parameter group Category Multiplicity
Sector ID Serial number serNum MHA 1
Description Range Step Unit Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
Defines the serial number of the unit in question. 1...80 characters internal_value = gui_value BTS restart needed EM <-> WBTS WBTS <-> RAC RAC <-> RACApp -
Table 133: Serial number substance (Substance) Parameter name Substance Abbreviated name substance 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Substance version number Note: Parameter is not seen in upload file in Description this release, because BTS SW is not providing those due to feature content change. Range 2...255 Step 1 Unit Formula for getting internal internal_value = gui_value value Default value -
Default value notes Related functions System information Modification Related parameters Parameter relationships
Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 134: Substance tmaSubunitRxFreqBandMax (TMA Subunit Receive Frequency Band Max) Parameter name TMA Subunit Receive Frequency Band Max Abbreviated tmaSubunitRxFreqBandMax name 3GPP name TMA Subunit receive frequency band Managed object MHA Parameter group Category Multiplicity 1 TMA Subunit receive frequency band Note: Parameter is not seen in upload file in this Description release, because BTS SW is not providing those due to feature content change. Range 0...6553500 Step 100 Unit kHz Formula for getting internal internal_value = gui_value value Default value Default value -
notes Related functions System information Modification Related parameters Parameter relationships
Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 135: TMA Subunit Receive Frequency Band Max tmaSubunitRxFreqBandMin (TMA Subunit Receive Frequency Band Min) Parameter name TMA Subunit Receive Frequency Band Min Abbreviated tmaSubunitRxFreqBandMin name 3GPP name TMA Subunit receive frequency band Managed object MHA Parameter group Category Multiplicity 1 TMA Subunit receive frequency band Note: Parameter is not seen in upload file in this Description release, because BTS SW is not providing those due to feature content change. Range 0...6553500 Step 100 Unit kHz Formula for getting internal internal_value = gui_value value Default value -
Default value notes Related functions System information Modification Not modifiable Related parameters Parameter relationships RAN1852 RET Device Naming Feature (standard) dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 136: TMA Subunit Receive Frequency Band Min tmaSubunitTxFreqBandMax (TMA Subunit Transmit Frequency Band Max) Parameter name TMA Subunit Transmit Frequency Band Max Abbreviated tmaSubunitTxFreqBandMax name 3GPP name TMA Subunit transmit frequency band Managed object MHA Parameter group Category Multiplicity 1 TMA Subunit transmit frequency band Note: Parameter is not seen in upload file in this Description release, because BTS SW is not providing those due to feature content change. Range 0...6553500 Step 100 Unit kHz Formula for getting internal internal_value = gui_value value Default value -
Default value notes Related functions System information Modification Related parameters Parameter relationships
Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 137: TMA Subunit Transmit Frequency Band Max tmaSubunitTxFreqBandMin (TMA Subunit Transmit Frequency Band Min) Parameter name TMA Subunit Transmit Frequency Band Min Abbreviated tmaSubunitTxFreqBandMin name 3GPP name TMA Subunit transmit frequency band Managed object MHA Parameter group Category Multiplicity 1 TMA Subunit transmit frequency band Note: Parameter is not seen in upload file in this Description release, because BTS SW is not providing those due to feature content change. Range 0...6553500 Step 100 Unit kHz Formula for getting internal internal_value = gui_value value
Default value Default value notes Related functions System information Modification Not modifiable Related parameters Parameter relationships RAN1852 RET Device Naming Feature (standard) dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 138: TMA Subunit Transmit Frequency Band Min tmaSubunitType (TMA Subunit Type) Parameter name TMA Subunit Type Abbreviated tmaSubunitType name 3GPP name TMA Subunit type Managed object MHA Parameter group Category Multiplicity 1 TMA Subunit type Note: Parameter is not seen in upload file in this Description release, because BTS SW is not providing those due to feature content change. Bit 0: Bypass, Bit 1: VSWR, Bit 2: spare (Always 0), Bit 3: spare (Always 0), Bit 4: spare Range (Always 0), Bit 5: spare (Always 0), Bit 6: spare (Always 0), Bit 7: spare (Always 0) Step Unit -
Formula for getting internal value Default value Default value notes Related functions System information Modification Related parameters Parameter relationships
0 Not modifiable -
Feature dependencies Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
RAN1852 RET Device Naming (standard)
WBTS -> RAC
3GPP Reference: AISG v.2.0
-
Table 139: TMA Subunit Type uplinkDelay (Uplink delay) Parameter name Uplink delay Abbreviated uplinkDelay name 3GPP name Managed object MHA Parameter group Category Multiplicity 1 Defines the MHA delay in the uplink direction for an "Other" type MHA. If the BTS Site Description Manager is used to calculate antenna round trip time delay, this value must be specified. Range 0...1000 Step 1
Unit Formula for getting internal value Default value Default value notes Related functions System information Modification
Related parameters
Parameter relationships Feature dependencies
ns internal_value = gui_value 0 ns BTS restart needed antennaRoundTripDelay of ANTL - Delays from passive mode MHA is added to antennaRoundTripDelay value by formula defined in antennaRoundTripDelay parameter description. mhaType of MHA - When passive mode "other" type MHA is used, Uplink delay needs to be defined other cases keep empty.
Interfaces References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
EM <-> WBTS WBTS <-> RAC RAC <-> RACApp
-
Table 140: wmhConnector (WMH connector) Parameter WMH connector name Abbreviated wmhConnector name 3GPP name Managed MHA object Parameter -
Uplink delay
group Category Multiplicity
1 Defines the MHA connector in question of WMHC and TMARET MHA types. The options are BTS1 (Pass-through) and BTS2 (Power) for Description WMHC, NODEB0 and NODEB1 for TMARET MHA types. If other than WMHC or TMARET MHA types are used then wmhConnector parameter value is None None (-1), BTS1 (0), BTS2 (1), NODEB0 (2), Range NODEB1 (3) Step Unit gui ==> internal None ==> -1 Formula for BTS1 ==> 0 getting internal BTS2 ==> 1 value NODEB0 ==> 2 NODEB1 ==> 3 Default value BTS1 (0) Default value notes Related functions System information Modification BTS restart needed Related parameters Parameter relationships Feature dependencies EM <-> WBTS WBTS <-> RAC Interfaces RAC <-> RACApp References Location in RNC GUI RAC DB Table RAC DB Column RAC user interface name
-
Table 141:
WMH connector
