Handbook of Tactical Combat Casualty Care Lessons LearnedFull description
Descripción: About Radio Mobile software
Full description
panduan cara menjalankan dan membuat apliaksi androidFull description
mobileFull description
presentation for mobile jammer project
Full description
Delphi XE8
about mobile communication
Mobile incoming call indicator Description. This circuit can be used to escape from the nuisance of mobile phone rings when you are at home. This circuit will give a visual indication indication if placed placed near a mobile mobile phone even even if the ringer ringer is deactivated. deactivated. When a call is coming to the mobile phone, the transmitter inside it becomes activated. The frequen frequency cy of the transmitter is around 900MHz.The coil L1 picks up these oscillations by induction and feds it to the base of Q1. This makes the transistor Q1 activated.Since the Collector of Q1 is connected to the pin 2 of IC1 (NE555) , the IC1 is triggered to make the LED connected at its output pin (pin 3) to blink. The blinking of the LED is the indication of incoming call. Circuit diagram with Parts list.
Notes.
The coil L1 can be made by making 150 turns of 36 SWG enameled copper wire on a 5mm dia plastic former.Or you can purchase a 10 uH coil from shop if available.
The circuit can be powered from a 6V battery. Assemble the circuit on a good good quality PCB. PCB.
