Method Statement Generator

7.1 Prior to pre commissioning activity -

Check generator earthing should be proper earthed .

-

Check power and control cable termination.

-

Make general visual inspection on the engine and alternator. Check if there any breakage , crack , indentation , leakage or looseness.

-

Take our foreign material such as keys, tools, cleaning wool, paner etc.

-

Check the fuel level in the dark tank. Refil with fuel if it low .

-

Check engine oil level on the dip stick, Refill with fuel if it is low.

-

Look at the water level by opening the radiator tap. If it is inadequate add more water.

-

Inspect the radiator air outlet hood, Open if clogged and clear away all obstruction in front of air outlet .

-

Check air filter gauge . Clean or replace the air filter If necessary. necessary.

-

Keep the inlet opening open .

-

Make sure that the generating set can take easily air from environment.

-

Check battery connection ,Tight if found any loss .

-

Open the battery cap and check the liquid level in the cells .

-

Check circuit breaker outlet switch is in off position .

-

Make Sure that emergency pushbutton is not pressed .

-

Starting the generation will be performing by commissioning assistant .