A detailed view about training and development of IT sectors in INDIA.Full description
ΠΕΡΙΟΔΙΚΟ ΜΑΚΕ
Descripción: FILM AND TELEVISIONMAKE UP
measureFull description
There is the best way to make money online form anywere of the world.
Make magazine vol 48Full description
Full description
GST and its impact on various sectors of Indian Economy
squirt woman how
Guión Extreme Make Over de Johan de MeijFull description
yorubaDescripción completa
Full description
MAKE Magazine - Vol 42Descrição completa
Absolut Design & Engineering
Internal 1 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
Checked
Date
20020731
Rev
v.2
Make Sectors Tool
File
Absolut Design & Engineering
Internal 2 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
1
Rev
v.2
File
GENERAL .................................................................................................................. 3 REQUIRED TABLE FORMAT ...................................................................................... 3 FROM MS EXPLORER ............................................................................................... 3 FROM MAPINFO ........................................................................................................ 4
TOOL BUTTON .......................................................................................................... 4 MENU BAR ................................................................................................................ 4
APPENDIX A .......................................................................................................................... 8 APPENDIX B .......................................................................................................................... 9
Absolut Design & Engineering
Internal 3 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
Checked
1
Introduction
1.1
General
Date
20020731
Rev
v.2
File
This MapBasic tool will create a MapInfo table of ‘pie shaped’ sectors for a given cell site database. The table can be used to label sector symbols with unique information (i.e. sector name, sector type or sector stats). Thematic layers can also be applied to the table for graphical analysis.
1.2
Required Table Format The input table must contain at least the following information for each sector. •
Latitude (degree-decimal)
•
Longitude (degree-decimal)
•
Azimuth
The table can also contain additional sector information as needed. •
Sector name
•
Beam width
•
Cell size
•
Carrier or Freq
•
PN’s or SCs
•
Neighbor lists
•
Statistical data
2
Starting MapBasic Program
2.1
From MS explorer •
Double click ‘make_sectors.mbx’ from within an explorer window.
The tool will be opened into the most recently opened MapInfo session. If MapInfo is not open, the tool will open a new MapInfo session.
Absolut Design & Engineering
Internal 4 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
2.2
Checked
Date
20020731
Rev
v.2
File
From MapInfo •
Select File>Run MapBasic Program.
•
Choose directory and file ‘make_sectors.mbx’.
•
Click Open button.
The tool will be opened in the current MapInfo session.
3
Make_Sector Tool The cell site table should be open before starting the sector creation process. Importing an excel file is described in Appendix B.
3.1
Tool Button
Figure 1: tool button A floating tool button will be added to MapInfo (figure1). Clicking the tool button will start the process described below in section 3.2.1.
3.2
Menu Bar
Figure 2: menu bar A new menu ‘Make Sectors’ will be added to the end of the current menu bar (figure 2).
Absolut Design & Engineering
Internal 5 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
3.2.1
Checked
Date
20020731
Rev
v.2
File
Create Sectors Selecting Make Sectors>Create Sectors will open the tools set-up window (figure 3). The window allows the user to specify the columns or fixed values the tool will use to create each sector symbol. If no tables are open the user will be prompted to open a table first. Importing an excel file is described in Appendix B.
Figure 3: make sector set-up window
From Table Select, from a list of open tables, which table contains the sector information. The new sector table will be saved to the selected table unless the ‘Save As New File’ option is checked.
Absolut Design & Engineering
Internal 6 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
Checked
Date
20020731
Rev
v.2
File
Latitude Select the column that contains the latitude information in degree-decimal format. Longitude Select the column that contains the longitude information in degree-decimal format. Azimuth Select the column that contains the azimuth information. Beam Width Use default box checked - Enter value to use for the beam width of all sectors. Use default box not checked - Select the column that contains the sector beam width information. Sector Size Use default box checked - Enter value to use for the sector size of all sectors (miles). Use default box not checked - Select the column that contains the sector size information (miles). Select Sector Color Click symbol to change fill pattern and color for all sectors. Cancel Click to exit set-up window without creating table. Open New File Click to open a new file into MapInfo and add to the available table selection. The new file can be an existing table, excel, text or dbf file. The file must be in the same format as described in section 1.2. Importing an excel file is described in Appendix B. Make Sectors Click to create sector table. 3.2.2
Tool Info Selecting Make Sectors>Tool Info will display a window containing information about the tool’s creator.
Absolut Design & Engineering
Internal 7 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
3.2.3
Checked
Date
20020731
Rev
v.2
File
Exit Selecting Make Sectors>Exit will terminate the MapBasic tool. All menus and tool bars will be removed.
4
Additional Comments •
To update sector lat/long or azimuth information the user must update the table and run ‘make_sectors’ again to update map.
•
To update other sector information the user can change the sector information and reload the table.
•
To add or delete sectors, the user must delete and recreate the MapInfo table file (.tab) then run the ‘make_sectors’ again.
Internal
Absolut Design & Engineering
8 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
Checked
Date
20020731
Rev
File
v.2
Appendix A Below is a sample table format. Information in the red highlighted columns must be included all others are optional. Additional columns and information can be included as necessary. Columns can be in any order and with any title. ID
Site_ID SECT
Long
Lat
Azimuth BW
Ant type
Elec Tilt Mech Tilt Structure PN
1 WAT-001
1
-85.5311886 35.1634344
50
65 Sa65132.plt
2
0
Rooftop
4
1 WAT-001
2
-85.5311886 35.1634344
170
65 Sa65132.plt
2
0
Rooftop
8
1 WAT-001
3
-85.5311886 35.1634344
315
65 Sa65132.plt
2
0
Rooftop 12
2 WAT-002
1
-85.5151486 35.1680292
0
65 Sa65132.plt
2
0
Monopole 16
2 WAT-002
2
-85.5151486 35.1680292
120
65 Sa65132.plt
2
0
Monopole 20
2 WAT-002
3
-85.5151486 35.1680292
240
65 Sa65132.plt
2
0
Monopole 24
4 WAT-004
1
-85.5048563 35.1101571
90
65 Sa65130.plt
2
0
Monopole 40
4 WAT-004
2
-85.5048563 35.1101571
210
65 Sa65130.plt
2
0
Monopole 44
4 WAT-004
3
-85.5048563 35.1101571
330
65 Sa65130.plt
2
0
Monopole 48
5 WAT-005
1
-85.3641721 35.1266426
15
65 Sa65132.plt
2
0
Monopole 52
5 WAT-005
2
-85.3641721 35.1266426
135
65 Sa65132.plt
2
0
Monopole 56
5 WAT-005
3
-85.3641721 35.1266426
255
65 Sa65132.plt
2
0
Monopole 60
6 WAT-006
1
-85.4839597 35.2061799
0
65 Sa65132.plt
2
0
Monopole 64
6 WAT-006
2
-85.4839597 35.2061799
120
65 Sa65132.plt
2
0
Monopole 68
6 WAT-006
3
-85.4839597 35.2061799
240
65 Sa65132.plt
2
0
Monopole 72
Example 1: sample table
Absolut Design & Engineering
Internal 9 (9)
REPORT Prepared by (also subject responsible if other)
No.
Sean Tokarz
Doc responsible/Approved
Checked
Date
20020731
Rev
v.2
File
Appendix B The following steps through the procedure to import an Excel file into MapInfo. 1. Select File>Open Table. 2. Change ‘File of Type’ to Microsoft Excel (*.xls). 3. Find saved excel file and click Open button. 4. Import table information window opens.
Figure 5: table information window •
Select ‘Other’ from Name Range. o
Change A1 to A2.
•
Check ‘Use Row Above Selected Range for Column Titles”
