Lm2500 Lubrication

Lubrication

Page 1 of 2

Lubrication System The gas turbine assembly includes the lubrication system supply and scavenge pump and the enginemounted lube and vent system piping. The Purchaser is responsible for supplying the remainder of the system, including: oil tank, oil cooler, oil filters, and oil tank air/oil separator. The LM2500 gas turbine lubrication system is shown in the simplified schematic below. (See Reference for identification of the lubrication schematic and installation drawing.) Details of the lube system requirements are provided in the following sections:

Gas Turbine Lube Supply Gas Turbine Sump Pressurization and Cooling

Gas Turbine Lube Scavenge Lube System Vent

Gas Turbine Lube Drains

Gas Turbine Lube System Interfaces

Materials for Gas Turbine Lube System

Gas Turbine Oil Tank And Plumbing

Off Engine Lube Oil System Cleanliness

Gas Turbine Approved Lubricants

http://inside-aep.ps.ge.com/insideaep/aep/iad/engine_prod_delv/idms/LM25bssac/sec09.h... 19/11/2005

Lubrication

Page 2 of 2

,1'(;

%$&.72723

+20(

http://inside-aep.ps.ge.com/insideaep/aep/iad/engine_prod_delv/idms/LM25bssac/sec09.h... 19/11/2005