Liquid crystal on silicon (LCoS or LCOS) is a "micro-projection" or "micro-display" technology typically applied in projection televisions. It is a reflective technology similar to DLP projectors; however, it uses liquid crystals instead of individual mirrors. By way of comparison, LCD projectors use transmissive LCD chips, allowing light to pass through the liquid crystal. In LCoS, liquid crystals are applied directly to the surface of a silicon chip coated with an aluminized layer, with some type of passivation layer, which is highly reflective.
LCoS technology can typically produce higher resolution and higher contrast images than standard liquid crystal display and plasma display technologies, which makes it less expensive to implement in such devices as televisions.
Contents [hide hide]]
1 History and implementations 2 Display system architectures 2.1 Three-panel designs o 2.2 One-panel designs o 3 See also 4 References 5 External links
[edit edit]] History and implementations General Electric first demonstrated an LCoS display in the late 1970s. As a 'proof of concept' vehicle, it was very low resolution. The late 1990's saw a number of companies attempt to develop products for near-eye and projection. At the 2004 CES CES,, Intel announced plans for the large scale production of inexpensive LCoS chips for use in flat panel displays. These plans were cancelled in October 2004. Sony has made it to market (December 2005) with the Sony-VPL-VW100 or "Ruby" projector, using SXRD, 3 LCoS chips each with a native resolution of 1080p of 1080p (1920 × 1080), with a stated contrast ratio of 15,000:1 using a dynamic iris. LCoS technology has the potential to enable the manufacture of big-screen high-definition televisions with very high picture quality at relatively low cost. However, LCoS, while conceptually straightforward, can be a difficult technology to master; a number of companies have dropped out of the LCoS business in recent years. Nonetheless, as of June 2006, proprietary methods for mass-producing LCoS developed, and at least four manufacturers produced LCoSbased rear-projection televisions for the consumer market; with the drop in prices for LCD and
plasma flat panels, consumers stopped buying rear projection sets, and as of July 2010 LCoSbased rear-projection televisions are no longer being made. Commercial implementations of LCoS technology include: Sony's SXRD (Silicon X-tal Reflective Display) and JVC's D-ILA (Digital Direct Drive Image Light Amplifier), and Epson's 'reflective 3LCD'. Every company which produces and markets LCoS rear-projection televisions [citation needed ] uses three-panel LCoS technology, . This is due to the fact that the HEO_5216_MC_5150 is the highest resolution 'single chip solution' currently available and is only 1280x720. Sony and JVC both produce and market front-projection displays that use three LCoS panels. Direct-view LCoS devices such as the single-panel LED-illuminated devices made by Displaytech and Forth Dimension Displays (Dalgety Bay, Fife, Scotland) (formerly known as CRLO Displays) are also used as electronic viewfinders for digital cameras, for pico projectors and within Near to Eye (NTE) applications such as Head Mounted Displays (HMDs). These devices are made using ferroelectric liquid crystals (so the technology is named FLCoS), which are inherently faster than other types of liquid crystals. Displaytech was acquired by Micron [1][2] Technology in May 2009, which is continuing to develop the FLCoS technology . Developers and manufacturers who have left the LCoS microimaging market include: Intel, Philips, MicroDisplay Corporation, S-Vision, Colorado Microdisplay, Spatialight, SyntaxBrillian.
[edit] Display system architectures There are two broad categories of LCoS displays: three-panel and single-panel. In three-panel designs, there is one display chip per color, and the images are combined optically. In singlepanel designs, one display chip shows the red, green, and blue components in succession with the observer's eyes relied upon to combine the color stream. As each color is presented, a color wheel (or an RGB LED array) illuminates the display with only red, green or blue light. If the frequency of the color fields is lower than about 540 Hz, an effect called color breakup is seen, where false colors are briefly perceived when either the image or the observer's eye is in motion. While less expensive; single-panel projectors require higher-speed display elements to process all three colors during a single frame time, and the need to avoid color breakup makes further demands on the speed of the display technology.
[edit] Three-panel designs In a DLP device the light is separated into three components and then combined back: Two beam splitters are needed. In LCoS devices the light is additionally polarized and then analyzed; four beam splitters are needed. In most DLP sets a color wheel separates colors from a lamp, using one chip for all three colors; SXRD sets use three separate chips, one for each color.
[edit] One-panel designs
Both Toshiba's and Intel's single-panel LCOS display program were discontinued in 2004 before [3] any units reached final-stage prototype . There were three single-panel LCoS displays in production. One by Philips, one by Microdisplay Corporation and one from Forth Dimension Displays. Forth Dimension Displays have a Ferroelectric LCoS display technology (known as TDI) (available in SXGA and 720P resolutions) which is mainly, but not exclusively, used in high resolution NTE applications such as Training & Simulation.
