Lindapter Catalogue English 369

Technical Innovation in in Steelwork Connections

Established 1934

Lindapter - Technical Innovation in Steelwork Connections

2

Tel: Tel: +44 (0) 1274 521444 www.lindapter.com

Established in 1934 as a small family business Lindapter has now become the market leader in steelwork fixings with a worldwide reputation; export accounting for an increasing portion of our Founder business. Lindapter abides by Henry Lindsay a policy which includes strict adherence to quality control and EHS procedures; also offering first class customer service using state of the art equipment. Continual improvement of both products and policies ensures that Lindapter continues to be at the forefront in the marketplace. All enquiries are dealt with on an individual basis ensuring that customers receive the correct technical support together with project specific drawings in either 2D or 3D formats together with itemised parts list; all part of a free comprehensive service. For situations where standard products are just not enough the R & D facility can design and develop new special products to suit individual applications. Whatever the application all products will meet Lindapters own exacting standards ensuring that they are safe, quick and easy to install saving the customer both time and money by reducing installed costs. As the vast majority of Lindapter products require no site drilling or welding steel sections can, if and when necessary, be reused ensuring both current and future environmental and sustainability issues can be met.

In the plant on the opposite page many different Lindapter applications are outlined.


3

Index

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Quality and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2 Cavity Fixings Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Type HB - Hollo-Bolt® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Type LB 2 - Lindibolt 2® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

1 Steelwork Fixings Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Girder Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Bolt Length / Tail Length / Installation . . . . . . . . . . . . . . . . . . . . . . . .11 Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Accessories for Type A and B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Plate and Packing Details for Type A and B . . . . . . . . . . . . . . . . . . . .15 Type AF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Type CF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Accessories for Type AF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Plate and Packing Details for Type AF and CF . . . . . . . . . . . . . . . . . .19 Type LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Type D2 and Type D3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Accessories for Type LR, D2 and D3 . . . . . . . . . . . . . . . . . . . . . . . . .22 Plate and Packing Details for Type LR, D2 and D3 . . . . . . . . . . . . . . .23 Type LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Accessories / Plate and Packing Details for Type LS . . . . . . . . . . . . .25 Type BR and Type RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Accessories / Plate and Packing Details for Type BR . . . . . . . . . . . . .27 Type Lindapter-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Type BSNT and Type BSLN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Type F9 and Type HW/HC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Type SC and Type LP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Type FC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Loads and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Technical Enquiry Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

4

3 Composite Decking Fixings Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Type AW - Alphawedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Type MW2 - Multiwedge 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Type TR60 and Type VN - V-Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Type SD2 - Slimdek 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Type TC - Toggle Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Decking Fixings Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Tel: +44 (0) 1274 521444 www.lindapter.com

4 Support Fixings

6 Appendix

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Type FLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Type FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Type LC and Type SW - Swivel Unit . . . . . . . . . . . . . . . . . . . . . . . . . .57 Type F3 and Type F3-BICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Type SH and Type HW / HC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Type Z10 and Type HCW30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Type HCW31 and Type WF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Type HCW34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Purlin Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Section Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 General Enquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Factors of safety shown in this catalogue are typical values and vary with different products from 2:1 to 5:1. Stated tightening torques must not be exceeded.

Disclaimer

Lindapter International supplies components in good faith, on the assumption that customers fully understand the loadings, safety factors and physical parameters of the products involved. Customers or users who are unaware or unsure of any details should refer to Lindapter International before use. Responsibility for loss, damage, or other consequences of mis-use cannot be accepted. Lindapter makes every effort to ensure that technical specifications and other product descriptions are correct. ‘Specification’ shall mean the specification (relating to the use of the materials) set out in the quotation given by the Seller to the Buyer. Responsibility for errors or omissions cannot be accepted. All dimensions stated are subject to production tolerances if in doubt please check with Lindapter. Applications All the applications featured in the catalogue are based on real projects. More information about these can be found on our website www.lindapter.com.

5 Floor Fixings Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Type FF - Floorfast ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Type GF - Grate-Fast ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Type GF3030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67


© Lindapter 2009 © Lindapter International © Lindapter is a registered trade mark In the interests of improving the quality and performance of Lindapter products, we reserve the right to make specification changes without prior notice.

5

Service and Support

Research and Development To meet the needs of a fast changing world Lindapter’s Research and Development Department works to develop new generic products. The team is supported by the latest computer aided design (CAD) techniques such as 3D modelling, rapid prototyping and finite element analysis; new products are tested in house on Lindapter’s own 1,000kN hydraulic test machine. This unique technical expertise is supported by Lindapter’s collaboration with respected companies and organisations such as Corus, Mannesmann, The Steel Construction Institute, CIDECT as well as many leading universities and approval bodies.

Engineered Solutions Developing products that meet the needs of a particular project is another Lindapter strength. The service offered to clients includes:

• • • • •

Design and development of custom products for unique projects Individual test runs and reports Detailed drawings and/or solid models Full strength and performance analysis Trial runs and on site consultation

Bespoke solution for sign fixings

Customer Technical Support For our existing product range Lindapter’s Technical Sales and Support Department offers customers full support for any project, large or small; this free of charge service includes: • • • •

Assembly solutions optimised for cost and performance Load analysis on Lindapter connections 2D AutoCAD and 3D SolidWorks drawings Bil ls of Materials

• • • •

Coating and corrosion recommendations On site technical advice and support Contractor training CPD Presentations

Sample Project

Seedhill Bridge, Lancashire, England Bridge refurbishment:

Due to the age and condition of the structure the use of welded shear studs was not possible. Instead modified Hollo-Bolts® were used which enabled the bridge deck refurbishment to be completed on time and to specification. For further information regarding this project see website www.lindapter.com.

6

Special Hollo-Bolt® Standard Hollo-Bolt®


Quality and Approvals

Quality

Approvals for sprinkler products

Product quality is one of the main life lines of the Lindapter philosophy, the entire company is particularly dedicated to this aspect. Lindapter has been accredited to BS EN ISO 9001 since 1986.

The American Insurance Association, Factory Mutual, offers an approval which is recognised by th e fire protection industry world-wide.

Q 05143

Approvals Lindapter has been trading internationally for many years respecting the market differences around the world. The relevant international authorities have granted many product approvals over time. The catalogue refers to them product by product. Approvals for construction

The Deutsches Institut für Bautechnik, Berlin is a body which approves products and materials for use in structural engineering applications in the construction and civil engineering industries in Germany. Lloyds Register Type Approved products have been subjected to tensile, frictional, shear, vibration and shock tests, witnessed and verified by Lloyds Register. The TÜV is the certifying authority for safety, quality and environmental protection in Germany. Det Norske Veritas has approved the use of Lindapter products in lifting applications. This includes their use on both mobile and fixed offshore installations.

Verband der Schadenversicherer e.V. is a German insurance association who also offers a rigorous approval for products used in the fire protection industry. These approvals serve to reinforce Lindapter’s extensive in-house testing procedures. Lindapter products are tested so that the user can be confident whether specifying or using that Lindapter products will perform as per the information detailed in this catalogue. Loads published are the product safe working loads, taking into account a factor of safety.

Corrosion Protection Lindapter products are delivered as standard either bright zinc plated or hot dip galvanised. Various other coatings and alternative materials are available upon request for most products including: • Sheradis in g • Delta seal • Delta tone • Mechanical galv anis ing • Sheraplex • Pla stic coatin g • Stain le ss steel • Special paint coatin g Lindapter is a member of the following organisations:

British Constructional Steelwork Association


The Steel Construction Institute

The Building Services Research and Information Association

7

8

Steelwork Fixings

1

Steelwork Fixings Lindapter Steelwork Fixings can be used in a wide variety of applications for connecting together steel sections of whatever shape and size; uppermost in this section is the Girder Clamp which, as with most Lindapter products, needs no on site drilling or welding saving both time and money by reducing installed costs. Numerous world wide project successes have demonstrated that this is ideally suited for both new construction and refurbishment of existing structures. Advantages

• Reduces design time • Guaranteed loads and approvals • No on-site drilling or welding • ‘Hot Working’ not required • Less work at height • Only hand tools required to install • Site adjustable • Power not required • Ability to deconstruct and multi-cycle rather than demolish Markets include:

• Plant Engineering • Chemical and Petro-chemical Industry • Materials Handling • Structural Engineering • Civil Engineering • Facades • Theatre Equipment • Transportation • Offshore Applications include:

• Steel Constructions • Cranes • Lifting Beams • Pipe Supports • Towers and Masts

9

Steelwork Fixings

Girder Clamps

1

Components of a Girder Clamp 1. Standard Grade 8 Hex Nut 2. Standard Hardened Washer 3. Lindapter Clamp

Dependent on the application different clamps could be used i.e. Types A, B, BR, AF, LR, LS, D2 or D3.

1

4. Packing Piece

In combination with the clamps mentioned above these parts increase the tail length to enable the product to sit correctly on the beam.

2 3

5. Location Plate (can be supplied if required)

This is an essential part of the girder clamp assembly that enables all the components to be located in the correct position. The hole centres and plate thickness are calculated to suit the individual application.

4

6. Lindapter Clamp

This can be of a similar type as 3 (above), although certain products are designed to specifically work together i.e. A + B.

5

7. Standard Grade 8.8 Hex Bolt or Setscrew

6

Loads The table beneath shows tensile and frictional load capabilities for a standard four bolt Girder Clamp using 4 bolts and 8 clamps at a 90° crossover angle. Lindapter is only too pleased to carry out all design work for individual connections free of charge based on the following details: • Load per connection • Siz e and type of both beams • Angle of crossover • Dis tance between beams • Inclination of beams

Clamps Bolt size Bolt grade Tensile / for 4 bolts Friction / for 4 bolts Torque

kN kN Nm

M12 8.8 23.2 1.4 69

7

Types A, B, BR, LR M16 M20 8.8 8.8 29.2 59.0 3.0 6.0 147 285

Type AF M24 8.8 78.8 9.0 491

M24 8.8 160.0 60.02) 800

M24 10.9 250.0 1) 70.02) 1000

1) Factor of safety 3.2:1 2) Factor of safety 2:1

All loads are based on actual test data having a factor of safety for f riction against slip and for tensile against ultimate failure (typically 5:1). Use of lower saf ety factor is not recommended.

Approvals All approvals apply to Girder Clamps using types A and B only, in sizes from M12 to M24 Further information is available upon request.

10


Steelwork Fixings

Bolt Length / Tail Length / Installation

Bolt length calculation for a standard Lindapter Girder Clamp, example shows Type A and B M20

1

Tail length The different tail length can be identified by a code of dimples underneath the clamps.

To calculate the bolt length all parts the bolt will go through have to be added up. The next longer standard bolt length should be used. One dimple: tail length short (s)

0.5 · bolt Ø as bolt protrusion

10

Height of nut

16

+ Washer

3

+ T of top clamp

20

Two dimples: tail length medium (m)

12.5

+ Top section + Plate thickness

12

+ Lower section

10

+ T of lower clamp

10 Three dimples: tail length long ( l )

Next standard bolt length

=

93.5

=

100.0

Correct installation of types A and B showing type A as an example Parallel flanges

90º

>90º

<90º

Maximum tail length tolerance of -1mm (up to M16) and -1.5mm (M20, M24) before applying the torque is acceptable.

Tapered flanges

<_5º

90º

5-8º

<90º

On 6º and 8º slopes types A and B require a special tail length/packing combination which will allow the clamp to tilt back slightly (incorporated into the combination table on page 15). For applications above 8° please see types AF, LR and LS.


11

Steelwork Fixings

Type A

1

Type A Malleable iron, bright zinc plated / hot dip galvanised

Nose

Recess

Clamping Area K Skirt

Tail

T V Y

X

Z

Steelwork clamp with recessed top to hold the bolt head captive whilst the nut is tightened. The skirt prevents the clamp rotating during installation. Suitable for flanges up to 8°. The clamp is installed correctly when the a rea ‘K’ grips the flange. The tail must be chosen to suit the thickness of the flange being gripped. For correct tail length/packing combinations please see page 15.

Typical Applications

(see also page 36-39)

Product Code

Bolt 8.8 Z

A08 A10 A12 A16 A20 A24

M8 M10 M12 M16 M20 M24

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt Frictional / 2 Bolts kN kN 1.0 1.5 5.8 0.7 7.3 1.5 14.7 3 19.7 4.5

Torque Nm 6 20 69 147 285 491

Y mm 16 20 26 30 36 48

X mm 8 11 13 16 19 25

Dimensions Tail Length V short medium long mm mm mm 4 4 5 7 4.5 6 9.5 5.5 8 11 7 10 12.5 9 12 16

T mm 4 5 6 8 10 12

Width mm 20 26 29 36 46 55

For higher loads the type AF should be used (see page 16). Order example: A16 medium HDG

12


Steelwork Fixings

Type B

1

Type B Malleable iron, bright zinc plated / hot dip galvanised

Nose

Flat Top

Clamping Area K Skirt

Tail

Z

T V Y

X

Steelwork clamp with flat top which allows the bolt head or nut to be rotated. Suitable for use with all bolts, studs, tie rods and J-bolts, and flanges up to 8°. The clamp is installed correctly when the area ‘K’ grips the flange. The tail must be chosen to suit the thickness of the flange being gripped. For correct tail length/packing combinations please see page 15.

Product Code

Bolt 8.8 Z

B08 B10 B12 B16 B20 B24

M8 M10 M12 M16 M20 M24

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt Frictional / 2 Bolts kN kN 1.0 1.5 5.8 0.7 7.3 1.5 14.7 3 19.7 4.5



Torque Nm 6 20 69 147 285 491

Y mm 16 20 26 30 36 48

X mm 8 11 13 16 19 25

Dimensions Tail Length V short medium long mm mm mm 4 4 5 7 4.5 6 9.5 5.5 8 11 7 10 12.5 9 12 16

T mm 8 10 12 16 20 24

Width mm 20 26 29 36 46 55

For higher loads the type AF should be used (see page 16). Order example: B16 medium HDG


13

Steelwork Fixings

Accessories for Type A and B

1

Type CW - Clipped Washer Mild Steel, bright zinc plated / hot dip galvanised

T Y

X

Z

Packing used to adjust the tail length of the clamp to meet differing beam flange thicknesses.

Product Code

Bolt Z

CW08 CW10 CW12 CW16 CW20 CW24

M8 M10 M12 M16 M20 M24

Y mm 4 5 6 8 10 12

Dimensions X T mm mm 9,5 2 14 2 19.5 2.5 17.5 3 22 4 29 4

Width mm 19 25 31 38 44 57

Order example: CW08 BZP

Type P1 short / P2 short Mild Steel, malleable iron, bright zinc plated / hot dip galvanised TP1 TP2

Y

X

Z


Product Code P1 P2 P1S08 P2S08 P1S10 P2S10 P1S12 P2S12 P1S16 P2S16 P1S20 P2S20 P1S24 P2S24

Bolt Z M8 M10 M12 M16 M20 M24

Y mm 4 5 6 8 10 12

X mm 10 13 16 21 23 32

Dimensions TP1 TP2 mm mm 4 8 5 10 6 12 8 16 10 20 12 24

Width mm 21 24 30 35 43 54

Order example: P1S16 HDG

Type T Malleable iron, bright zinc plated / hot dip galvanised

T

Z To fill the nose of type A and B making it horizontal. For parallel flanges only. The thickness ‘T’ should be added for tail length and bolt length calculations. The product is for aesthetic purposes only and technically not necessary.

Product Code

Bolt Z

T12 T16 T20 T24

M12 M16 M20 M24

Dimensions T mm 3 4 5 6.5

Order example: T12 BZP

Type W Mild Steel, malleable iron, bright zinc plated / hot dip galvanised

T

Z Washer to fill the recess of type A to enable the nut to be tightened. When calculating the bolt length please add ‘T’.

14

Product Code

Bolt Z

W08

M8

Dimensions T mm 4

W10 W12 W16 W20

M10 M12 M16 M20

5.5 6.5 8 9.5

Order example: W08 BZP


L1

L1

l 1M

Location and End Plates

1

Steelwork Fixings

Plate and Packing Details for Type A and B

l 1M

b1

b1

L1 =

Plate length L2 = Plate width l 1M, l 2M = Hole centres b1, b2 = Flange width d= Hole Ø Plate thickness s=

b2

L2

l 2M

L2

l 2M

d d Location Plate

End Plate

Plate Dimensions

Material: Mild Steel Grade S275 JR (for other grades please contact Lindapter) 1)

Location Plate

M8

Hole Ø d mm 9

Plate Thickness s mm 6

M10 M12 M16 M20 M24

11 13 18 22 26

8 8 10 12 15

Bolt Z

Hole Centres l 1M, l 2M mm b+9

End Plate


Length/Width min L1, min L2 mm b + 36

b + 11 b + 13 b + 18 b + 22 b + 26

b + 44 b + 54 b + 70 b + 88 b + 104

Hole Centre

12 12 15 20 25

mm b1 + 9

Length min L1 mm b1 + 36

Hole Centre min l 2M mm 40

b1 + 11 b1 + 13 b1 + 18 b1 + 22 b1 + 26

b1 + 44 b1 + 54 b1 + 70 b1 + 88 b1 + 104

50 60 70 90 110

l 1M

Width min L2 mm l 2M + 40 + 40 l 2M + 50 l 2M + 60 l 2M + 70 l 2M + 90 l 2M

1) Dependant on the use of the end plate the thickness might need to be increased.

Calculation of bolt length see page 11

Tail Length / Packing Combinations for Types A & B

Tail Length / Packing Combinations for Types A & B

For beams up to and including 5° slope

For IPN-Beams of an 8° slope

Flange Thickness M12 mm A,B CW P1S P2S

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30

s m s s m l

m l

s s l l

m m s s m l

s m s s l

m

1 1 1 2 1 1 1 2 2 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 2

Types A & B M16 M20 A,B CW P1S P2S A,B CW P1S P2S

s s m m s l l

s s l

s m l l l l l l l

m l l

s l

1 2 1 3 2 2 3 3 1 1 2 2 2 1

1 1 1 1 1 1 1 -

1 1 1

■ ■

s s m m s s l

m s s s m s m s m l

m s s m m

1 1 1 2 2 2 3 1 3 1 2 2 2 -

1 1 1 1 1 1 1 1 -

1

IPN M12 Profile A,B CW P1S P2S

M24 A,B CW P1S P2S ■ ■ ■ ▲

s s m m s s l l

s s l l

s s m m s s l

s

1 1 2 2 1 1 1 1 2

1 1 1 1 1 1 1 1

80 ■ - 100 ■ - 120 s - 140 s - 160 m - 180 m - 200 s 1 220 s 1 240 m 1 260 m 1 280 l - 300 s - 1 320 m 2 340 l 1 360 s 1 1 380 m 3 400 l 2 425 ▲ - 450 ▲ - 475 ▲ - 500 ▲ - 550 ▲ - 600 ▲ - -

-

-

Types A & B M16 M20 A,B CW P1S P2S A,B CW P1S P2S ■ ■ ■ ■

s s ▲ ▲

m m ▲ ▲

l l ▲

s l

m m ▲ ▲ ▲ ▲

1 -

1 1 1 -

-

■ ■ ■ ■ ■ ■ ■ ■

s s ▲

m m s l l ▲ ▲ ▲ ▲ ▲ ▲ ▲

1 -

- - - - - - - - - - - - - - - - - - - - - - - -

M24 A,B CW P1S P2S ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

s s s ▲

m m s ▲ ▲

l l ▲ ▲

1 -

-

-

For thicker flanges please contact Lindapter. s = short

m = medium

l =

long

P1S = P1 short

P2S = P2 short

■

= Type not applicable


▲

= Please contact Lindapter

15

Steelwork Fixings

Type AF

1

Type AF SG iron, hot dip galvanised

Without washer: For bolt grade 8.8

Recess

Nose Skirt Tail With washer Type AFW

Flat Top

T V Y

X With washer inverted Type AFW

for bolt grade 10.9 with larger hexagons (M12 - M20)

Z


(see also page 36-39) High friction clamp with recessed top to hold bolt head captive whilst the nut is tightened. Can be combined with type CF. The skirt prevents the clamp rotating during installation. The tail of the AF spans across slotted holes. For flanges up to 10°. Washer type AFW available (see illustration). For correct tail length/packing combinations please see page 18.

Product Code

1) 2) 3) 4)

Safe Working Loads (5:1) Factor of Safety (2:1) Tensile / 1 Bolt Frictional/ 1)2 Bolts

Bolt Z

2)

Grade

AF12 AF16 AF20 AF24

M12 M16 M20 M24

8.8 8.8 8.8 8.8

kN 8.5 16.0 26.3 40.0

AF12 AF16 AF20 AF24

M12 M16 M20 M24

10.94) 10.94) 10.94) 10.94)

10.0 19.5 30.0 62.53)

Dimensions Tail Length V T

Painted Steelwork

Galv. Steelwork

Torque

Y

X

short medium

kN 3.4 8.0 13.0 24.0

kN 3.9 10.0 16.0 30.0

Nm 90 240 470 800

mm 29 35 40 48

mm 27 37 39 60

mm mm 5 12.5 8 15 10 18 15 30

mm 17 22 25 32

mm 22 27 31 42

mm 39 49 56 82

4.0 11.0 20.0 28.0

5.2 12.0 25.0 35.0

130 300 647 1000

29 35 40 48

27 37 39 60

5 8 10 15

17 22 25 32

22 27 31 42

39 49 56 82

12.5 15 18 30

Type AF Type AF with AFW Width

Frictional Load figures are based on Type AF and Location plates in hot dip galvanised finish Shot blast and painted steelwork 3.2:1 factor of safety For HR or HV bolts (hot dip galvanised and lubricated) please refer to manufacturers’ recommendation for torque figures.

Order example: AF12 short

16


Steelwork Fixings

Type CF

1

Type CF SG iron, hot dip galvanised

Anti-rotation markings

Nose

Legs

Y

Y

X

X

min T

max T

V

Z

Z min t

max t Typical Applications


High friction clamp which hooks over flanges of I-beams, angles and channels. Lindapter markings act as a unique anti-rotation device. Can be combined with all Lindapter Girder Clamp products including type AF.

Product Code CF12 CF16 CF20

3)

CF / A CF / A3) CF / A3) CF / AF CF / AF CF / AF

Bolt 8.8 Z M12 M16 M20

M12 M16 M20 M12 M16 M20

(5:1) Tensile / 1 Bolt kN 8.5 16.0 26.3

Safe Working Loads factor of safety (2:1) Frictional/1)2 Bolts Painted Steelwork 2) Galv. Steelwork kN kN 3.4 3.9 8.0 10.0 13.0 16.0

CF Combinations with other Lindapter Clamps kN kN 5.8 0.7 7.3 1.5 14.7 3 8.5 3.4 16.0 8.0 26.3 13.0

Torque Nm 90 240 470

Y mm 32 44 53

Dimensions X t T mm mm mm 14 6 - 13 21 - 29 18 8 - 16 25 - 33 22 10 - 19 30 - 41

V mm 25 32 45

Width mm 46 56 65

Order example: CF12 kN 0.7 1.7 3.0 3.9 10.0 16.0

Nm 69 147 285 90 240 470

1) Frictional load figures are based on type CF and location plate in HDG finish 2) Shot blast and painted steelwork 3) Also applies to type B, BR, LR, D2 or D3


17

Steelwork Fixings

Accessories for Type AF

1

Type AFCW Mild Steel, hot dip galvanised

T Y

X

Product Code

Bolt Z

AF12CW AF16CW AF20CW

M12 M16 M20

Y mm 7 8 9.5

Dimensions X T mm mm 33 2 40 2 40.5 2

Width mm 40 50 55

Order example: AF12CW Packing used to adjust the tail length of the clamp to meet differing beam flange thicknesses; has a slight bend along its centre line which flattens out during installation.

Z

Type AFP1 / AFP2 Mild Steel, hot dip galvanised

T Y

X

Z

Product Code P1 P2 AF12P1 AF12P2 AF16P1 AF16P2 AF20P1 AF20P2 AF24P1 AF24P2

Bolt Z M12 M16 M20 M24

Y mm 7 8 9.5 12

X mm 33 42 45.5 73

Dimensions TP1 TP2 mm mm 5 10 5 10 5 10 5 10

Width mm 40 52 56 85

Order example: AF12P1


Type AFW SG iron, malleable iron, hot dip galvanised

T

Z Washer filling the recess of the type AF.

Product Code

Bolt Z

AFW12 AFW16 AFW20

M12 M16 M20

Dimensions T mm 5 5 6

AFW24

M24

10

Order example: AFW12

Additionally it features two projections which, when the AFW is inverted, will captivate the larger hexagons of 10.9 bolts. (M12 – M20 only).

T M24 version has no projections.

Z

18


L1

L1

l 1M


1

Steelwork Fixings

Plate and Packing Details for Type AF and C F

l 1M

b1

b1

L1 =


b2

L2

l 2M

l 2M

L2

d

d Location Plate

End Plate

Plate Dimensions

Material: Mild Steel Grade S355 JR (for other grades please contact Lindapter) 1)

Location Plate

M12

Hole Ø d mm 13


M16 M20 M24

18 22 26

15 20 25

Bolt Z

Hole Centres l 1M, l 2M mm b + 13

End Plate



b + 18 b + 22 b + 26

b + 110 b + 130 b + 180

Hole Centre mm b1 + 13



b1 + 18 b1 + 22 b1 + 26

b1 + 110 b1 + 130 b1 + 180

100 180 200

l 1M

25 30 40

Width min L2 mm l 2M + 80 + 100 l 2M + 180 l 2M + 200 l 2M

1) Dependant on the use of the end plate the thickness might need to be increased. 2) For combinations of Type CF with A, B and BR see page 15 and for types D2, D3 and LR see page 23.


Tail Length / Packing Combinations for Types AF Parallel flanges and beams of up to 10º slope Type AF

Flange M12

M16

M20

mm

A F A FC W AF P1 A FP2

A F A FC W AF P1 A FP 2

A F A FC W AF P1 A FP 2

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

s s s s s s s s m m s m m m m s m m m m s m m

s = short

1 1 2 3 1 1 2 1 2 2 1 2 2

1 1 1 1 1 1 1 1 -

m = medium

1 1 1 1 2 1 1 ■

■ ■

s s s s s s s s m m m s m m m m m m m m m

1 1 2 3 1 1 1 1

1 1 1 1 1 1 -

1 1 1 1 1

Type AF

Flange

Thickness

■ ■ ■ ■

s s s s s s s s m m m m m m m m m s s

1 1 2 3 1 1 2 1 1 1 1

1 1 1 1 1 1

M24 AF

1 1

■ ■ ■ ■ ■ ■ ■

s s s s s s s s s s s s s s s m

Thickness

A FP 1 AF P2

1 1 1 1 1 -

1 1 1 1 -

M12

mm

AF

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

m m s s m m m s s m m m s s m m m s s m m s s

M16

AF CW AFP 1 AF P2

1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 2 2 2 2 2 3 3 2 2 2 3 3 3 3 3 4 4 3 3 4 4

AF

s m m m m m m m m m s m m m m s m m m m s m m

M20

AF CW AFP 1 AF P2

1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 1 1 1 2 2 2 2 3 2 2 2 2 3 3 3 3 3 4 3 3

AF

m m m m m m m s m m m m m m m m m m m m m m m

M24

AF CW AFP 1 AF P2

1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 2 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3

AF

m m m m m m m m m m m m m m m m m m m m m m m

AF P1 A FP 2

1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 2 2 2



19

Steelwork Fixings

Type LR

1

Type LR Malleable iron, bright zinc plated / hot dip galvanised Saddle Slot Nose

Leg Clip

Tail

max Y

min X

max T min V

Z min Y

max X

min T max V Typical Applications


Z Self adjusting clamp for various flange thicknesses and slopes up to 15°. The leg of the saddle prevents the clamp rotating during installation. The LR tail spans slotted holes. For thicker flanges packings P1 long and P2 long are available. For correct tail length/packing combinations please see page 23.

Safe Working Loads (5:1 Factor of Safety)

Product

Bolt 8.8

Code

Z

Tensile / 1 Bolt

Frictional / 2 Bolts

Torque

Clamping Range V

Y

X

Dimensions T

Width with Saddle

LR10

M10

kN 1.5

kN -

Nm 20

mm 3 - 10

mm 21 - 24

mm 24 - 26

mm 21 - 24

mm 33

LR12 LR16 LR20 LR24

M12 M16 M20 M24

5.8 7.3 14.7 19.7

0.7 1.5 3 4.5

69 147 285 491

3 - 12 3 - 16 3 - 20 3 - 24

26 - 29 30 - 35 42 - 49 47 - 57

25 - 31 34 - 37 46 - 51 52 - 58

25 - 29 30 - 36 41 - 48 44 - 54

39 46 57 76

Order example: LR10 BZP

20


Steelwork Fixings

Type D2 / Type D3

1

Type D2 Malleable iron, bright zinc plated, hot dip galvanised

S

Recess

T

Nose

V

Setscrew Tail

Y

Clamping Area K

X

Skirt

Z

Type D3 Malleable iron, bright zinc plated, hot dip galvanised

Z S

Flat Top

T V Y

X

Adjustable clamps incorporate a setscrew to accommodate a wide range of flange thicknesses. Type D2 has a recessed head to hold the bolt head captive. The skirt prevents the clamp rotating during installation. For flanges up to 5°. For thicker flanges packings P1 long and P2 long are available. For correct tail length/packing combinations please see page 23.



Correct Installation: Setscrew S needs to be adjusted so that V is 1mm shorter than the flange thickness prior to installation. Adjust the setscrew after installation so that the bolt Z is 90° to the clamp and the clamp contacts the flange with area ‘K’ only.

Product Code

Bolt 8.8 Z

D210 D212 D216 D220 D224

M10 M12 M16 M20 M24

D312 D316

M12 M16

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt Frictional / 2 Bolts kN kN 1.5 5.8 0.7 7.3 1.5 14.7 3 19.7 4.5 5.8 7.3

0.7 1.5

Torque Nm 20 69 147 285 491 69 147

Clamping Range V 1) V2) mm mm 5 - 10 10 - 20 5 - 10 10 - 22 6.5 - 13 13 - 20 8.5 - 17 17 - 24 10 - 19 19 - 30

Y mm 20 26 30 36 48

X mm 20 25 30 35 49

5 - 10 6.5 - 13

26 30

25 30

10 - 22 13 - 20

Dimensions S T mm mm M6 5 M6 6 M8 8 M10 10 M12 12 M6 M8

12 16

Width mm 26 29 35 42 54 29 35

1) Setscrew S inserted from above. 2) Setscrew S inserted from below.

Order example: D210 BZP


21

Steelwork Fixings

Accessories for Type LR, D2 and D3

1

Type P1 long / P2 long Mild Steel, malleable iron, bright zinc plated / hot dip galvanised

TP1 TP2

Y

X

Z

Product Code P1 P2 P1L10 P2L10 P1L12 P2L12 P1L16 P2L16 P1L20 P2L20 P1L24

P2L24


Y mm 5 6 8 10

Dimensions X TP1 mm mm 24 5 32 6 40 8 47 10

M24

12

64

12

TP2 mm 10 12 16 20

Width mm 24 30 35 43

24

54

Order example: P1L10 BZP


Type T Malleable iron, bright zinc plated / hot dip galvanised

T

Z To fill the nose of type D2 and D3 making it horizontal. For parallel flanges only. The thickness ‘T’ should be added for tail length and bolt length calculations. The product is for aesthetic purposes only and technically not necessary.

Product Code

Bolt Z

T12 T16 T20 T24

M12 M16 M20 M24

Dimensions T mm 3 4 5 6.5

Order example: T12 BZP

Type W Mild Steel, bright zinc plated / hot dip galvanised

T

Washer to fill the recess of type D2 to enable the nut to be tightened. When calculating the bolt length please add ‘T’.

22

Z

Product Code

Bolt Z

W08 W10 W12 W16 W20

M8 M10 M12 M16 M20

Dimensions T mm 4 5.5 6.5 8 9.5

Order example: W08 BZP


L1

L1

l 1M


1

Steelwork Fixings

Plate and Packing Details for Type LR, D2 and D3

l 1M

b1

b1

L1 =


b2

L2

l 2M

l 2M

L2

d d Location Plate

End Plate

Plate Dimensions

Material: Mild Steel Grade S275 JR 1)

Location Plate

M10

Hole Ø d mm 11


M12 M16 M20 M24

13 18 22 26

12 15 20 25

Bolt Z

Hole Centres l 1M, l 2M mm b + 11

End Plate


b + 13 b + 18 b + 22 b + 26

b + 81 b + 105 b + 132 b + 156


Hole Centre mm b1 + 11



b1 + 13 b1 + 18 b1 + 22 b1 + 26

b1 + 81 b1 + 105 b1 + 132 b1 + 156

80 100 120 150

l 1M

15 20 25 30

Width min L2 mm l 2M + 50 + 60 l 2M + 70 l 2M + 90 l 2M + 110 l 2M



Tail Length / Packing Combinations for Type LR

Tail Length / Packing Combinations for Type LR

Parallel flanges

For IPN-Beams of an 8° slope

Type

M 10

M 12

Combinations LR P1L P2L

mm

mm

1 1 1 1 1 1 1

1 1 1 -

1 1 2 2 3

3 - 10 8 - 15 13 - 20 18 - 25 23 - 30 28 - 35 33 - 40

3 - 12 9 - 18 15 - 24 21 - 30 27 - 36 33 - 42 39 - 48

M 16

M 20

M 24

Clamping Range mm mm

mm

3 - 16 11 - 24 19 - 32 27 - 40 35 - 48 43 - 56 51 - 64

3 - 20 13 - 30 23 - 40 33 - 50 43 - 60 53 - 70 63 - 80

3 - 24 15 - 36 27 - 48 39 - 60 51 - 72 63 - 84 75 - 96

Tail Length / Packing Combinations for Type D2 & D3 Parallel flanges and beams of up to 5° slope Type

Combinations D P1L P2L 11) - 1 1 1 1 1 1 1

1 1 1 -

1 1 2 2 3

M 10

M 12

M 16

M 20

M 24

D2

D2 / D3

D2 / D3

D2

D2

mm 5 - 10

mm 5 - 10

10 - 20 15 - 25 20 - 30 25 - 35 30 - 40 35 - 45 40 - 50

10 - 22 16 - 28 22 - 34 28 - 40 34 - 46 40 - 52 46 - 58

Clamping Range mm mm 6.5 - 13 8.5 - 17 13 - 20 21 - 28 29 - 36 37 - 44 45 - 52 53 - 60 61 - 68

17 - 24 27 - 34 37 - 44 47 - 54 57 - 64 67 - 74 77 - 84

mm 10 - 19 19 - 30 31 - 42 43 - 54 55 - 66 67 - 78 79 - 90 91 - 102

IPN M10 Profile LR P1L P2L

M12 LR P1L P2L

80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 425 450 475 500 550 600

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ■

P1L = P1 long

1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 -

■

P2L = P2 long

1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 ■

M16 LR P1L P2L ■ ■

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 -

1 1

M20 LR P1L P2L ■ ■ ■ ■

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1

-

M24 LR P1L P2L ■ ■ ■ ■ ■ ■ ■

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1

-


For thicker flanges please contact Lindapter.

1) Setscrew S inverted.


23

Steelwork Fixings

Type LS

1

Type LS Cast Stainless Steel equivalent to Grade 316

Nose Tail

min Y

max X

max T min V

Z

max Y

min X

min T

max V



Z Self adjusting clamp for various flange thicknesses and slopes up to 10°. The special serrations on the tail prevent the clamp rotating during installation. The LS tail spans over slotted holes.

Product Code

Bolt A4-70 Z

LS10 LS12 LS16

M10 M12 M16

LS20

M20

Safe Working Load (5:1) Factor of Safety (2:1) Tensile / 1 Bolt Frictional / 2 Bolts kN kN 3.0 1.5 7.0 2.0 10.0 3.0 18.0

5.0

Torque Nm 40 80 200

Clamping Range V mm 3 - 15 3 - 20 3 - 25

Y mm 17 - 19 16 - 22 22 - 25

Dimensions X T mm mm 18 - 24 16 - 21 18 - 29 17 - 23 27 - 37 20 - 28

400

3 - 30

24 - 31

25 - 42

23 - 32

Width mm 38 40 55 60

Order example: LS10

24


1

Steelwork Fixings

Accessories / Plate and Packing Details for Type LS

Accessories Packings are available upon request.

L1

L1

l 1M


l 1M

b1

b1

L1 =


b2

l 2M

L2

l 2M

L2

d d Location Plate

End Plate

Plate Dimensions

Material: Mild Steel Grade S275 JR or S355 JR 1)

Location Plate

Bolt Z M10 M12 M16

Hole Ø d mm 11 13 18

M20

22

Plate Thickness S275 S355 s s mm mm 8 8 12 10 15 12 20

End Plate

Hole Centres Length/Width l 1M, l 2M min L1, min L2 mm mm b + 11 b + 70 b + 13 b + 80 b + 18 b + 100

15

b + 22

b + 130

Plate Thickness S275 S355 s s mm mm 12 12 20 15 25 20 30

25

Hole Centre mm b + 11 b + 13 b + 18

Length min L1 mm b + 70 b + 80 b + 100

Hole Centre min l 2M mm 80 80 110

b + 22

b + 130

120

l 1M

Width min L2 mm l 2M + 60 l 2M + 60 l 2M + 80 l 2M

+ 90




25

Steelwork Fixings

Type BR / Type RC

1

Flat Top

Type BR

Nose

Malleable iron, bright zinc plated / hot dip galvanised

Clamping Area K Tail

Skirt Z

T V Y

X

Versatile clamp for steel beams or rails. The skirt prevents the clamp rotating during installation. The BR tail spans slotted holes. Suitable for flanges up to 8°. Product Code

Bolt 8.8 Z

BR12 BR16 BR20 BR24

12 16 20 24

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt Frictional / 2 Bolts kN kN 5.8 0.7 7.3 1.5 14.7 3 19.7 4.5

Torque Nm 69 147 285 491

Y mm 26 30 36 48

Dimensions Tail Length V short medium mm mm 4 6 6 8 7 10 9 12

X mm 13 16 19 25

T mm 13 16 19 25

Width mm 29 35 42 54

Order example: BR12 short HDG

Type RC

Hole to suit M12-M24

Nose

Forged steel, corrosion protection as required

Skirt Tail Special clamp to secure rails or steel beams of 10mm or greater. Packings are available for thicker flanges. The RC tail spans slotted holes. Suitable for flanges up to 5°. The product will be drilled to suit hole size and position requirements of the applications.

W

L H V

X

Product Code

Bolt 8.8 Z

RCS12 RCS16 RCS20 RCS24

M12 M16 M20 M24

Min. Safe Working Load1) (5:1 Factor of Safety) Tensile / 1 Bolt kN 2.6 4.0 9.6 12.3

Torque Nm 69 147 285 491

Tail Length V mm 10 10 10 10

X mm 6.5 - 26.5 9 - 24 11 - 22 13 - 20

Dimensions L mm 76 76 76 76

H mm 29 29 29 29

Width W mm 50 50 50 50

1) The safe working load depends on the position of the bolt hole. The greater dimension X the lower the load.

Order example: RCS12 HDG with dimension X = ______ mm

26


Steelwork Fixings

Accessories / Plate and Packing Details for Type BR

1

Type CW - Clipped Washer Mild Steel, bright zinc plated / hot dip galvanised

T Y

X

Z

Product Code

Bolt Z

CW12 CW16 CW20

M12 M16 M20

Y mm 6 8 10

CW24

M24

12

Dimensions X T mm mm 19.5 2.5 17.5 3 22 4 29

4

Width mm 31 38 44 57

Order example: CW12 BZP


Type P1 short / P2 short Mild Steel, malleable iron, bright zinc plated / hot dip galvanised TP1 TP2

Y

X

Z


Product Code P1 P2 P1S12 P2S12 P1S16 P2S16 P1S20 P2S20 P1S24 P2S24


Y mm 6 8 10 12

X mm 16 21 23 32

Dimensions TP1 TP2 mm mm 6 12 8 16 10 20 12 24

Width mm 30 35 43 54

Order example: P1S12 BZP

For Type BR please see the following: • Location on and and End End Plates, ates, page 15 • Calculation ation of bolt bolt length, length, page 11 • For beams with th slopes slopes of up to 8º please please use the table for for beams of up to 5º slope ope (see page 15). 15). NB: The flange thickness refers to t 1. Type T ype BR is only available with tail length ‘short’ and ‘medium’. b

h

t1


27





1

 Malleable iron, SG iron, corrosion protection as requested

Plug

Lindapter-HD

Nose Leg Skirt Lindapter-HD Lindapter -HD Spring Clip

Elastomer Spring The rail clamps Type Lindapter HD and Lindapter HD Spring facilitate precise alignment of the rails by allowing a high degree of stepless lateral adjustability. Technical Data

Suitable for all rails with tapered flanges and crane speeds of up to 60m/min. For wheel loads above 400kN or lateral loads higher than wheel loads please contact co ntact Lindapter.

Normal Lateral Conditions SWL* Torque kN Nm

High Lateral Conditions SWL* Torque kN Nm

Dimensions Stud Lateral Adjustm. Plate Width Length H max L min A mm mm mm

Product Code

Clip Type

Bolt 8.8 Z

HD20 H

Hard

M20

22.5

185

46

450

F-8

F + 38

+ 11.5

B + 137

30

27

74

HD20 S

Soft

M20

22.5

185

46

450

F-5

F + 40

+ 11.5

B + 137

30

27

74

HD20 SP

Spring

M20

22.5

185

46

450

F-7

F + 40

+ 11.5

B + 137

30

27

74

450

1)

F + 45

+ 11.5

B + 137

30

27

74

F + 45

+ 11.5

B + 137

30

27

74

HD20 S-P

Soft & Pad

M20

22.5

HD20 SP-P

Spring & Pad

M20

22.5

HD24 H

Hard

M24

40

HD24 S

Soft

M24

HD24 SP

Spring

M24

HD24 S-P HD24 SP-P

Soft & Pad Spring & Pad

M24 M24

185

F

1)

Distances X 2) Y 2) mm mm

Width W mm

46

450

F-2

320

60

760

F-8

F + 41

+8

B + 130

30

27

74

40

320

60

760

F-4

F + 43

+8

B + 130

30

27

74

40

320

60

760

F-7

40 40

185

46

Leg V mm

320 320

60 60

760 760

F + 43

+8

B + 130

30

27

74

F+1

1)

F + 48

+8

B + 130

30

27

74

F-2

1)

F + 48

+8

B + 130

30

27

74

4:1 Factor of Safety. 1) Based on 5mm thick resilient pad. 2) Based on plug set at 3 o’clock position.

*

NB: Leg length V for use with rail sections only with tapered base. For parallel sections please refer to Lindapter.

Order example: HD20 H HDG for rail: ________

28


1







Lindapter-HD: Variation Hard Clip

Leg length V should be selected to clamp rail down tightly and allow no vertical rail movement. Not to be used when the rail is supported by a resilient pad.

H F Y

X

V B A

Lindapter-HD: Variation Soft Clip

Leg length V should be selected to allow vertical rail movement caused by rail wave, whilst holding the rail in precise alignment laterally. Rail ends need to be fixed.

H F Y

X

V B A

 The spring clip version incorporates an elastomer spring into the nose of the product, designed to provide some vertical restraint to the rail whilst still allowing the rail to lift with rail wave. The elastomer spring is manufactured from high density synthetic polymer which has a Shore A hardness of 94.97. The spring is unaffected by salt water and most chemicals and has a high resistance to abrasion.

H F Y X

V B A

Resilient Pad

Both the spring and soft clips can be used with a resilient pad to decrease track running noise /structural vibration, level out irregular contact between surface and rail and to spread wheel load evenly over a wider area. Resilient Pad The Resilient Pad is manufactured by:

Both the spring and soft clips can be used with a resilient pad to decrease track running noise /structural vibration, level out irregular contact between surface and rail and to spread wheel load evenly over a wider area. For further information on Fabreeka® rail pads, visit www.fabreeka.com.

Installation

V Resilient Pad

1. Position clip on bolt or stud. Place

the plug in 3 o’clock position and tighten the nut. 2. Rotate the built in nut profile in a clockwise direction from the 3 o’clock position to locate the clip against the rail and laterally adjust the rail if required. 3. Apply the recommended torque to the hexagon nut.


+L -L W

29

Steelwork Fixings

Type BSNT / Type BSLN

Flat Top

Nose

Type BSNT

1


Z

T Y

X

Special clamp for installation of beams flange to flange. The location plate is substituted by a connecting frame made of steel flats equalling the flange thicknesses in height. The clamps are welded to this frame.

Product Code

Bolt 8.8 Z

BSNT12 BSNT16 BSNT20 BSNT24

M12 M16 M20 M24

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt kN 5.8 7.3 14.7 19.7

Dimensions Torque Nm 69 147 285 491

Y mm 26 30 36 48

X mm 13 16 19 25

T mm 16 20 24 32

Width mm 29 35 42 54

Order example: BSNT12 HDG

Type BSLN

Extended Nose

Flat Top


Tail

Skirt

Z

T V K Y

X

Special clamp designed with longer nose to extend the contact area with the steel section. For parallel flanges only. Can be used with types CW, P1 short, P2 short. Product Code

Bolt 8.8 Z

BSLN12 BSLN16

M12 M16

Safe Working Load (5:1 Factor of Safety) Tensile / 1 Bolt kN 5.8 7.3

Torque Nm 69 147

Y mm 45.5 44

X mm 15.5 17

Dimensions Tail Length V mm 6 11

T mm 17 16

Width mm 28 32

Order example: BSLN12 HDG

30


Steelwork Fixings

Type F9 / Type HW/HC

1

Type F9 Malleable iron, bright zinc plated / hot dip galvanised

Nut

Bolt

Z Single Leg

V

Jaws

W

T

X

V Double Leg Flange Clamp for connecting all types of parallel running steelwork with flanges of the same width. Can be used with bolts or alternatively with threaded rod. Not suitable for tapered flanges. Product Code with without Bolt Bolt F910NC F912NC F916NC F920NC F924NC

F910NB F912NB F916NB F920NB F924NB

Bolt 4.6 Z M10 M12 M16 M20 M24

Safe Working Loads (5:1 Factor of Safety) Tensile / 1 Bolt kN 2 2.8 5.6 8.4 14.0

Torque Nm 20 39 93 177 235

Clamping Range W mm 19 - 42 26 - 60 29 - 69 32 - 82 45 - 95

Dimensions X mm 25 35 43 51 76

V mm 13 17 21 25 38

T mm 19 24 28 35 55

Width mm 24 30 35 44 63

Order example: F910NC HDG

Type HW/HC Malleable iron, bright zinc plated / hot dip galvanised

X Z

Hemispherical Washer

W2

R

W1 L

Y 10° Hemispherical Cup For vertical suspension on angled surface of up to 10° swing either side of the vertical. The hemispherical washer (HW) can be used without the cup. Loads are subject to applications, please contact Lindapter.

Product Code Hemispherical Washer Hemispherical Cup mm HW06 HW08 HW10 HC10 HW12 HC12 HW16 HC16 HW20 HC20 HW24

HC24

Hemispherical Washer X W1 mm mm 19 9 22 10 25 12 29 12 34 16 44 19 57

25

Hemispherical Cup Y W2 mm mm 32 12 35 12 41 16 54 19 67

25

Dimensions Hemispherical Washer & Cup R L mm 13 14 14 16 17 19 22 24 29

32

Order example: HC10 BZP


31

Type SC / Type LP

Steelwork Fixings

1

Type SC / Type LP Corrosion Protection as required Bespoke units for multiple applications with vertical load, loads at an angle and rotation of up to 360°. Shown are typical applications, other loads and designs available. All loads subject to suitability of supporting section.

Type SC Type SC Shackle Clamp with 4 Bolts

Loading: up to 60.0kN Dir ections: vertical lift Angle: ± 10º

Type LP4 Type LP4 Lifting Point with 4 Bolts

Loading: up to 7t (68kN) Dir ections: 360º rotation Angle: 0 - 90º

Type LP6 Type LP6 Lifting Point with 6 Bolts

Loading: up to 10t (98kN) Dir ections: 360º rotation Angle: 0 - 90º

Order details: Loading, rotation, angle and beam dimensions

32


Steelwork Fixings

Type FC

1

Type FC Forged steel, bright zinc plated plus JS500

The Flush Clamp is a Girder Clamp System without the need of a location plate. Suitable for connecting beams of varying widths and thicknesses. Suitable for flanges up to 10° slope.

Product Code

Special Bolt 8.8

FC16

M16

Safe Working Loads (5:1 Factor of Safety) Tensile / 4 Bolts Frictional / 4 Bolts kN kN 30.0 7.5

Torque Nm 147

Clamping Range V Flange Thickness Flange Width 1) mm mm 5 - 19 75 - 180

Dimensions T mm 22 - 27

B mm 304

1) Depending on beam connection angles (see table below).

Order example: FC16

Flat washer

Half nut Nut

Special washer

Body min V

max T

max V

min T B

Special Bolt

Minimum Possible Beam Connection Angles

Flange Width 76.2 mm m a 101.6 mm e B m127.0 mm o t t 152.4 mm o B 177.8 mm

76.2 mm 45° 50° 55° 65° 75°

Top Beam 101.6 127.0 mm mm 50° 55° 50° 55° 55° 55° 65° 65° 75° 75°

152.4 mm 65° 65° 65° 65° 75°


177.8 mm 75° 75° 75° 75° 80°

Angle

33

Steelwork Fixings

Loads and Specifications

1

Loads and Specifications Reference is made throughout this catalogue to loads related to our product applications. Given loads are for boltgrade 8.8 unless otherwise stated. These are defined below. Should you have any difficulty in selecting the correct product for your needs, please contact us.

Tensile Loading

Combined Loads

In tensile applications the load transmits a force parallel to the centre line of the bolt shank, hence applying a load to the contact point of the Lindapter. See product data tables for allowable tensile loads at varying bolt sizes.

Frictional Loading

When the fixings are subject to more than one load condition, the resulting forces must be calculated to determine the product and bolt sizes required. Please contact Lindapter with your application.

Compression Loading

The force is applied at 90° to the bolt shank. The point at which slip occurs depends upon the condition and finish of the steelwork, the coating of the Lindapter and the grade of bolt used. Slip is defined as the constant load at which relative movement between clamped components exceeds 0.1mm.

Shear Loading

Torque

The Safe Working Load of the assembly is determined by the bolt grade and diameter as the force is resisted by the cross sectional area of the bolt shanks. It is recommended that reference be made to the bolt manufacturers’ technical literature or the relevant structural steel design code to ascertain a Safe Working Load per bolt.

34

Force here is applied direct to the supporting section rather than the Lindapter products. If, however, there is a gap between the surfaces being connected, the buckling strength of the supporting fabrication must be considered.

The recommended torque values stated in the product sections must be applied in order to achieve the stated Safe Working Loads. Any reduction in torques applied will lower the product Safe Working Load and is not recommended.


1

Steelwork Fixings

Technical Enquiry Fax

Technical Enquiry Fax Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Department . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Town . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Post Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Web

www . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Your details will only be used internally and not disclosed to third parties.

Project Name / Reference: ............................................................................................................... ............................................................................................................... 1. Is your case comparable with an applic ation in this catalogue?

If yes, ple ase state page and number . . . . . . . . . . . . . . . . . . . . . . .

❍

If no, please enclose drawing detail 2. Load per connection:

Tensile . . . . . . . . . . . . . . . kN Frictional . . . . . . . . . . . . . kN Please state any special load conditions (vibration, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Static Load

❍

Dynamic Load

❍

3.

Load Cycles . . . . . . . . . . . . . . . Beam Type

Flange Width

Flange Thickness

Top Beam Bottom Beam 4. Corrosion protection of beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. Number of connections required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fax: Email:

+44 (0) 1274 521130 [email protected]


35

Steelwork Fixings


36

1

2

3

4

5

6

7

8

9

1


Steelwork Fixings


10

11

12

13

14

15

5 16

17

18


1

37

Steelwork Fixings


38

19

20

21

22

23

24

25

26

27

1


Steelwork Fixings


28

29

30

31

32

33

34

35

36


1

39

Cavity Fixings

Cavity Fixings In the late 1940’s Lindapter revolutionised the concept of ‘blind’ fixing, or where limited access is available, with the development of the Lindibolt. Some time later, following the introduction and wide acceptance of hollow section steelwork, the range was expanded to include the Hollo-Bolt®. Due to the continued development and expansion of SHS into the wide variety which is available today from square, rectangular, circular to oval this product group has also seen a rapid expansion in diameters, lengths, finishes, and head types finally culminating in the Design Councils Millennium Products Award for Innovation which the Hollo-Bolt® attained in 2000. Following comprehensive testing the Hollo-Bolt® is now included in the BCSA/SCI publication ‘Joints in Steel Construction – Simple Connections’, more commonly known simply as the Green Book, as well as being approved by the Deutsches Institut für Bautechnik. The Hollo-Bolt® is ideal for use on any steel structure eliminating the need for unsightly welding or strapping, installation is simple and quick requiring only the type of hand tools commonly available on site. Typical Hollo-Bolt® applications include: • Primary Steelwork • Secondary Steelwork • Bridges • Cladding • Balconies • Towers and masts • Staircases and handrails

40

2

Type HB - Hollo-Bolt

Cavity Fixings

®

Type HB - Hollo-Bolt

2

®

Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316

Collar Rubber Washer Sleeve Cone

Suitable for hollow sections, tubes and where access is available from one side only. For high corrosion protection the Hollo-Bolt® comes with additional JS500 protection as standard or hot dip galvanised. Sizes M16 and M20 have a patented collapse mechanism for optimised clamping force. Speedy installation with standard tools and for the Type Hollo-Bolt® Flush Fit with installation nut. (One free per box) Awarded the Design Council’s Millennium Product status for innovation in the year 2000.

Hollo-Bolt®: M8, M10, M12

H

Hollo-Bolt®: M16, M20

H

L

D

L

D

d

d Rubber Washer

W W

Rubber Washer compressed / increased clamping force

8



Head Variations

Flush Fit

Countersunk (Head)

Hexagonal Head

Socket Head Cap Screw

Button Head Security

M8-M12

M8-M16

M8-M20

Supplied to order

Supplied to order


41

Type HB - Hollo-Bolt Product Code

Bolt

2

Cavity Fixings

Load Tables for Types HB and HBFF

®

Clamping Thickness

Outer 1) Ply

Sleeve

Length

Collar

Outer Ø

Height Ø

Torque

SHS Section

A/F Material

HB08-1 HB08-2 HB08-3

M8x50 M8x70 M8x90

W mm 3 - 22 22 - 41 41 - 60

min t mm -

L mm 30 49 68

HB10-1 HB10-2 HB10-3

M10x55 M10x75 M10x90

3 - 22 22 - 41 41 - 60

-

HB12-1 HB12-2 HB12-3

M12x60 M12x90 M12x110

3 - 25 25 - 47 47 - 69

HB16-1 HB16-2 HB16-3

M16x75 M16x100 M16x120

HB20-1 HB20-2 HB20-3

M20x90 M20x120 M20x150

d mm

H D mm mm

mm

Nm

13.75

5

22

19

23

S275

30 48 67

17.75

6

29

24

45

S275

-

35 57 79

19.75

7

32

30

80

S275

12 - 29 29 - 50 50 - 71

8 8 8

41.5 63 84

25.75

8

38

36

190

S275

12 - 34 34 - 60 60 - 86

8 8 8

50 76 102

32.75

10 51

46

300

S275

2)


Tensile

Single Shear

kN 4.0 4.0 4.0 7.0 6.0 8.5 8.0 7.0 8.0 6.5 10.5 10.0 10.0 10.5 13.5 18.5 8.0 15.0 20.0 21.0 11.5 17.0 15.0 16.0 23.0 25.0 35.0 12.5 18.0 19.0

kN

Dimensions mm 140x140x5.0 150x150x6.3 200x200x10.0 100x100x6.3 140x140x5.0 140x140x8.0 150x150x6.3 180x180x8.0 200x200x10.0 140x140x5.0 140x140x8.0 150x150x6.3 180x180x8.0 200x200x10.0 100x100x6.3 100x100x10.0 140x140x5.0 140x140x6.3 140x140x8.0 140x140x12.5 150x150x6.3 180x180x8.0 200x200x10.0 140x140x6.3 140x140x8.0 140x140x10.0 140x140x12.5 150x150x6.3 180x180x8.0 200x200x10.0

5.0

10.0

15.0

30.0

40.0

®

Type HBFF - Hollo-Bolt Flush Fit Product Code

Counter Sunk Bolt

mm HBFF08-1

Clamping Thickness

Outer Ply

Sleeve

Length

Outer Ø

W mm

min t mm

L mm

d mm

Collar

Installation Torque Tool

Height Ø H D mm mm

A/F

SHS Section

Material

mm

Nm

M8x50

5

10 - 27

8

30

13.75

5

24

19

23

S275

HBFF10-1 M10x60

6

12 - 27

10

30

17.75

6

30

24

45

S275

HBFF12-1 M12x60

8

12 - 30

10

35

19.75

7

33

30

80

S275

Dimensions mm 140x140x5.0 150x150x6.3 180x180x8.0 200x200x10.0 100x100x6.3 140x140x5.0 140x140x8.0 150x150x6.3 180x180x8.0 200x200x10.0 140x140x5.0 140x140x8.0 150x150x6.3 180x180x8.0 200x200x10.0


Tensile kN 4.0 4.0 4.0 4.0 7.0 6.0 8.5 8.0 7.0 8.0 6.5 10.5 10.0 10.0 10.5

Single Shear kN 5.0

10.0

15.0

Order example: HB08-1 BZP plus JS 500 HBFF08-1 BZP plus JS 500 without / with ____ installation nut(s) 1) The thickness of the outer ply needs to be at least 8mm. If necessary spacer washers should be used beneath the collar to increase the thickness to 8mm. 2) The Hollo-Bolt® can be used on a wide variety of SHS sections; those shown above are only representative to give an indication of variations in Hollo-Bolt ® capacity. The safe working loads, in both tension and shear, are applicable to the Hollo-Bolt ® only, failure of the section, particularly on those with thin walls and a wide chord face, could occur at a lower figure and its strength should be checked using the ‘Green Book’ design guide.

42


2

Cavity Fixings

Technical Data for Types HB and HBFF

Joints in Steel Construction - Simple Connections The tables on the opposite page state the SWL with a 5:1 factor of safety and should be used for secondary applications, for primary design please consult the guide Joints in Steel Construction - Simple Connections.

The guide provides design guidance for the use of Hollo-Bolt® and gives essential information for structural steelwork connections for use in buildings designed by the ‘Simple Method’ i.e. braced frames where connections carry mainly shear and axial loads only. To obtain further details on the Simple Connections guide please con tact: The Steel Construction Institute Tel: +44 (0) 1344 636 525 Fax: +44 (0) 1344 636 570 www.steel-sci.org

Published by SCI/BCSA Connections Group. Publication Number: P212 ISBN 1 85942 072 9

Bolt Diameter, Hole and Edge Distances Type HB

HB08 HB10 HB12 HB16

Clearance Hole Ø d1 mm 14 (+1.0 / -0.2) 18 (+1.0 / -0.2) 20 (+1.0 / -0.2) 26 (+2.0 / -0.2)

HB20

33 (+2.0 / -0.2)

Type

Installation Hollo-Bolt

Hole Distances min A min B mm mm 35 13 40 15 50 18 55 20 70

25

Edge Distances B+C mm B + C > 17.5 B + C > 22.5 B + C > 25.0 B + C > 32.5

min t d1

d1

A

B

C

B + C > 33.0

®

1. Align pre-drilled fixture and

steelwork. Insert Hollo-Bolt® through fixture and steelwork. 2. Grip the Hollo-Bolt® collar with an open ended spanner. 3. Using a torque wrench, tighten the central bolt to the recommended torque.

Bolt Diameter, Hole and Edge Distances Type HBFF Type

HBFF08 HBFF10 HBFF12

Clearance Hole Ø d1 mm 14 (+1.0 / -0.2) 18 (+1.0 / -0.2) 20 (+1.0 / -0.2)

Countersunk Ø Depth d2 t1 mm mm 27 6.5 31 6.5 35 7.5

Hole Distances min A min B mm mm 35 13 40 15 50 18

Edge Distances B+C mm B + C > 17.5 B + C > 22.5 B + C > 25.0

90º d2 min t t1 d1

d1

A

B

C

®

Installation Hollo-Bolt Flush Fit

Installation nut

1. Align pre-drilled fixture and

steelwork. Insert Hollo-Bolt® through fixture and steelwork. 2. Apply installation nut and grip nut with an open ended spanner. 3. Using a torque wrench, tighten the central counter-sunk bolt to the recommended torque.


43

Type LB2 - Lindibolt 2

Cavity Fixings

®

2

Washer

Type LB2 - Lindibolt 2

®

Steel, Stainless Steel Grade 316, bright zinc plated Main Body Setscrew Cone Locknut

Nut

D

W

C

B

F

A

d

Z

P

Y W

Self heading bolt suitable for fixing to hollow-sections, tubes and where access is available from one side only. The Lindibolt® uses a standard clearance hole.

Product Code

LB10 LB12 LB16 LB20 LB24

Lindibolt ® Size Length Z Y mm M10 69 M12 80 M16 105 M20 128 M24 158

Hole Ø d mm 11 13 17 21 25

Safe Working Load 1) (Factor of Safety 5:1) Clamping Length Projection Tensile Single Shear W P kN kN mm mm 3.0 3.4 7 - 30 7.5 - 10 5.0 5.0 10 - 36 9 - 12 8.0 9.8 12 - 48 12 - 16 14.0 15.2 14 - 60 15 - 20 20.0 22.5 18 - 72 18 - 24

Torque Main Body B and Nut C&D Thread Z Torque A/F Nm mm M10 20 17 M12 31 19 M16 81 24 M20 129 30 M24 203 36

Setscrew F Bolt F M5 M6 M8 M10 M12

Torque Nm 6 11 23 45 80

A/F mm 8 10 13 17 19

1) The safe working loads, in both tension and shear, shown above are applicable to the Lindibolt 2® only. Failure of the section, particularly on those with thin walls and a wide chord face, could occur at a lower figure and its strength should be checked.

Order example: LB10 BZP

Installation

1. Set nut (C) at (W) plus projection (P).

Tighten Locknut (D). 2. Align pre-drilled fixtures. Insert Lindibolt® through both fixtures, cone end first. 3. Hold nut (C) with spanner and tighten bolt (F). Loosen off locknut (D) and tighten nut (C). Secure by re-tightening locknut (D).

44


Cavity Fixings


1

2

3

4

5

6


2

45

Composite Decking Fixings

3

Composite Decking Fixings Lindapter composite decking fixings have all been designed in conjunction with the various decking manufacturers to ensure they fulfil the necessary requirements from ease of installation to carrying capacity. All the fixings are designed to fit inside the dovetail shaped re-entrant channel which is common throughout all the profiles and give a secure point from which building services can b e suspended with guaranteed capacities. To guarantee the published capacities it is important that all the Lindapter Composite Decking Fixings are installed only when the slab has been poured and the concrete reaches full strength. Advantages include: • Speed of installation • No special tools required • No weakening of the decking profiles • No damage of the surfaces of the decking • No possibility of delamination • Adjustable and easily removable

46


Composite Decking Fixings 3 

Type MF 

Type MF Bracket: Steel strip, electro zinc plate (yellow iridescent) trivalent passivate plus JS 500 Met-Nut: Malleable iron, bright zinc plated Met-Nut

Bracket

 manufactured by Composite Metal Flooring (CMF®).   manufactured by Kingspan Structural Products. The application example above shows the Lindapter Type MF with an M8 Stud End Fixing (HF-DMFG-NO2-1M) manufactured by

Product Code

Rod 

Safe Working Load (3:1 Factor of Safety) Tensile / 1 rod kN

Torque Nm

MF06

M6



10

MF08

M8



10

MF10

M10



10

® The table opposite details safe working loads of the Lindapter Type MF installed with threaded rod, for load capabilities of the Gripple End Fixing, please visit www.gripple.com.

Installation

1.

2.

3.

4.

1. Pre-assemble the Met-Nut and bracket onto the threaded rod and insert one side of the bracket into the decking. 2. Insert the other side of the bracket to position inside the decking. 3. 4. Tighten the nut on the rod to a torque of 10Nm / 7ft lbs (prevent rod from rotating).  If in doubt, please contact Lindapter’s Technical Support Department for advice.



Type AW

3

Type AW - Alphawedge Locking Plate: Pre-galvanised strip Wedge: Malleable iron, bright zinc plated

Wedge

Locking Plate

The Alphawedge is designed for Ribdeck AL, E60 and 80 profiles manufactured by Richard Lees Steel Decking (see page 52).

Product Code

Rod 4.6

AW06 AW08 AW10

M6 M8 M10

Safe Working Load (3:1 Factor of Safety) Tensile / 1 Rod kN 1.0 1.0 1.0

Torque Nm 10 10 10

Order example: AW06

Installation

1.

2.

3.

4.

1. Pre-assemble the Alphawedge and Locking Plate onto the threaded rod (flat surface uppermost). 2. Insert wedge into the re-entrant channel of the decking, rotate 90°. 3. Slide plate up the threaded rod, over the wedge, to lock it in position into the channel. 4. Tighten the locknut beneath the plate to hold the assembly in position.


47


Type MW2

3

Type MW2 - Multiwedge 2 Bracket: Pre-galvanised strip Multinut: Malleable iron, bright zinc plated Multinut

Bracket

The Multiwedge 2 is designed for MD60 and MD80 profiles manufactured by Kingspan Structural Products (see page 52).

Product Code

Rod 4.6

MW06 MW08 MW10

M6 M8 M10


Torque Nm 10 10 10

Order example: MW06

Installation

1.

2.

3.

4.

1. Position Multi-nut and bracket on threaded rod (flat surface uppermost) and insert one leg of bracket into re-entrant channel of decking.

Snap other leg of bracket into channel. 2. Slide assembly to desired position along length of re-entrant channel. 3. Push and turn the multi-nut clockwise until it locks into the channel walls. 4. Tighten the hexagon nut beneath the assembly.

48



Type TR60 / Type VN

3

Type TR60 Locking Plate: Pre-galvanised strip Wedge: Malleable iron, bright zinc plated

Wedge

Locking Plate The TR60 is designed for TR60 and 80 profiles manufactured by Structural Metal Decks (see page 52).

Product Code

Rod 4.6

TR6006 TR6008 TR6010

M6 M8 M10


Torque Nm 10 10 10

Order example: TR6006

Type VN - V-Nut

Installation

1.

2.

3.

4.

1. Pre-assemble the wedge and locking plate onto the threaded

rod (flat surface uppermost). 2. Insert wedge into the re-entrant channel of the decking and rotate until the chamfered cams engage on the sides of the channel. 3. Slide the plate up the threaded rod and over the wedge to lock it into position in the channel. 4. Tighten the locknut beneath the plate to hold the assembly in position.

Installation

Malleable iron, mild steel, bright zinc plated

12.5mm

1.

2.

3.

25mm

13mm

The V-Nut fits the re-entrant channel of several composite floor deckings (see page 52).

VN06

M6

Safe Working Load (4:1 Factor of Safety) Tensile / 1 Rod kN 1.8

VN08 VN10

M8 M10

2.0 2.1

Product Code

Rod 4.6

1. Screw VN onto threaded rod. 2. Insert VN and rod into re-entrant channel of decking.

Torque Nm 10 10 10

3. Rotate both rod and VN through 90° so that tapered sides

engage the sides of the channel.

Order example: VN06


49


Type SD2

3

Type SD2 - Slimdek 2 Inner Body V-Nut

Pre-galvanised strip

Main Body

Cam

The Slimdek 2 is designed for the CF225 profile manufactured by Corus Panels and Profiles. It gives a fully flexible suspension position (see page 52).

Product Code

Rod 4.6

SD206 SD208 SD210

M6 M8 M10


Torque Nm 12 12 12

Order example: SD206 Installation 1.

2.

3.

4.

5.

6.

1. With Slimdek 2 in it’s retracted position (as supplied) locate the fixing in the re-entrant channel. 2. Hold Slimdek 2 in position with one hand, then rotate cam into the direction shown above with a spanner. 3. Rotate the nut until the inner body of the fixing locates against the re-entrant channel, and the nut feels tight. 4. Offer the V-Nut on a threaded rod up to the main body. 5. Rotate V-Nut through 90° to allow it to sit at the bottom of the Slimdek 2 body. 6. Secure the assembly with a nut.

50



Type TC

3

Type TC - Toggle Clamp Steel Strip, bright zinc plated Nut

Toggle

V The Toggle Clamp is designed for service suspension from pre-cast hollow core slabs (minimum depth of core 75mm) as well as SHS, steel sheeting or purlins.

T W

Product Code

Rod min. 8.8

TC08 TC10

M8 M10

Hole Ø mm 22 25

Safe Working Load (4:1 Factor of Safety) Tensile / 1 Rod kN 2.45 2.45

Torque Nm 10 10

Dimensions W mm 16.5 17.5

T mm 68 68

Width V mm 13 15

Order example: TC08

Installation

LIND AP T ER

1.

2.

L I N D A P T E R

L I N D A P T E R

3.

LINDAPTER L I N D A P T E R

4.

5.

6.

1. Drill hole. If toggle is to be used to support from pre-cast hollow core slab, ensure hole is central to hollow core. 2. Insert threaded rod through toggle, ensuring nut is flush with end of rod. 3. Align toggle parallel with rod, so that nut engages into the retaining cavity. 4. Offer up the assembly, inserting the toggle body completely through the h ole. 5. Shake rod so that toggle body locates horizontally across hole.

Allow rod to drop down so that the nut locates in the seat in the toggle body. 6. Wind up rod to top of section as shown as high as possible. Secure the assembly with a nut and washer.


51





Decking Profles

Lindapter Decking Fixings

Composite Metal Flooring (CMF)

Type MF

3

• Metfoor 60 • Metfoor 80

Richard Lees Steel Decking

Type AW

• Ribdeck AL • Ribdeck E60

• Ribdeck 80

Kingspan Structural Products

Type MW2

• MD60 • MD80

Structural Metal Decks

Type TR60

• TR60 • TR80

Corus Panels & Profles

Type SD2

• CF225

Structural Metal Decks

Composite Metal Flooring (CMF)

• R51

• Metfoor 55

Corus Panel & Profles

Kingspan Structural Products

• CF51

• MD50

Type VN

Richard Lees Steel Decking • Holorib

52






3

Installation

Type MF

1.

2.

3.

4.

1. Pre-assemble the Met-Nut and bracket onto the threaded rod and insert one side of the bracket into the decking. 2. Insert the other side of the bracket to position inside the decking. 3 the Met-Nut clockwise until the position in Fig. 4 has been achieved. 4. Tighten the nut on the rod to a torque of 10Nm / 7ft lbs (prevent rod from rotating).

Type AW - Alphawedge

1.

2.

3.

1. Pre-assemble the Alphawedge and locking plate onto the  2 rotate 90°. 3 position into the channel. 4. Tighten the nut on the rod to a torque of 10Nm / 7ft lbs (prevent rod from rotating).

4.

Type MW2 - Multiwedge 2

1.

2.

3.

4.

1 uppermost) and insert one leg of bracket into re-entrant channel of decking. Snap other leg of bracket into channel. 2. Slide assembly to desired position along length of re-entrant channel. 3. Push and turn the multi-nut clockwise until it locks into the channel walls. 4. Tighten the nut on the rod to a torque of 10Nm / 7ft lbs (prevent rod from rotating).

Type TR60

1.

1.

4.

1.

2.

3.

2.

5.

2.

4.

3.

6.

3.

1. Pre-assemble the wedge and locking plate onto the threaded  2. Insert wedge into the re-entrant channel of the decking and rotate until the chamfered cams engage on the sides of the channel. 3. Slide the plate up the threaded rod and over the wedge to lock it into position in the channel. 4. Tighten the nut on the rod to a torque of 10Nm / 7ft lbs (prevent rod from rotating).

Type SD2 - Slimdek 2 1. With Slimdek 2 in the retracted position (as supplied) locate  2 Slimdek 2 body to move the cam in the direction illustrated. 3 4. Offer the V-Nut on a threaded rod up through the slot. 5. Rotate the V-Nut 90° to si t at the bottom of S limdek 2 body. 6. Secure the assembly with a nut and tighten to a torque of 12Nm / 8.8ft lbs (prevent rod from rotating).

Type VN - V-Nut 1. Screw VN onto threaded rod. 2. Insert VN and rod into re-entrant channel of decking. 3. Rotate both rod and VN through 90° so that tapered sides engage the sides of the channel.


53

Support Fixings

4

Support Fixings Lindapter’s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended ceilings and all manner of electrical equipment such as cable tray and ladder. These products have all been designed to give speed and ease of installation to reduce time and keep costs under control. Where necessary support products have been tested, and approved, by the relevant bodies such as those which oversee and insure fire protection installations. For the installation of heavy duty service equipment such as pipe supports used in the petro chemical industry the steelwork fixings in section 1 of this catalogue are more suitable.

54


4

Support Fixings

Type FLS

Type FLS High Grade Alloy Steel, bright zinc plated Setscrew Z

Locknut

Swivel Unit Nut Basket T

W

U

X

R 360º

Beam flange clamp with swivel unit. For par allel and sloping flanges. Supplied with grade 8.8 setscrew for secure grip.

Y Safe Working Load (4:1 Factor of Safety) Product

Thread

Code

Y

FLS08 FLS10

M8 M10

Tensile/  25º

Torque

Tensil e/> 25º to  45° Clamping Thickness Setscrew

kN 2.5 2.5

W mm 3 - 17 3 - 17

kN 1.5 1.5

Setscrew

Nut

Z Nm 18 18

N Nm 18 18

Z M10 M10

Dimensions

R mm 55 55

T mm 53 53

U mm 58 58

X Width mm mm 27 28 27 28

Order example: FLS08 Approved Applications

Installation

Z N

M

S 1.

2.

3.

4. 

1. Locate FLS onto flange.

25°



25°



25°

General Applications Parallel Flanges only

2. Ensuring lug on locknut locates into main body, tighten down

setscrew (Z), and then tighten upper locknut (N). 3. Install threaded rod by screwing into nut located in nut basket (S). Ensure full thread capture. 4. Secure assembly in nut basket (S) from beneath using a locknut (not supplied). Ensure that the cup point setscrew always grips on the tapered side of the flange.


90°



45°



45°

55

Support Fixings

Type FL

4

Type FL Malleable iron, bright zinc plated

Hexagon Setscrew Square Head Setscrew Locknut

Rear Hole (Tapped / Clear) Main Body

Z N

T V

U

W

X

Y

Beam Clamp suitable for use with parallel or tapered flange beams, supplied with the back hole drilled or tapped. The type FL uses a grade 8.8 cup point setscrew for secure grip. Supplied with square or alternatively hexagon head setscrews. Can be used with type SW – Swivel Unit (see page 57) when connecting to inclined sections.

Product Code Clear Tapped FL106D FL106T FL108D FL108T FL210D FL210T FL312D FL312T FL412D FL410T

Hole Ø Y mm 7 9 11 13 13

Thread Y M6 M8 M10 M12 M10

Safe Working Load (4:1 Factor Clamping of Safety) Thickness Tensile W kN mm 1.1 3 - 17 1.1 3 - 17 2.4 3 - 19 3.1 3 - 23 3.1 3 - 28

Setscrew Z M8 M8 M10 M10 M10

Torque SetLockscrew nut Z N Nm Nm 8 11 8 11 8 22 8 22 8 22

T mm 36 36 45 50 53

Dimensions U X mm mm 35 20 35 20 40 22 46 28 51 27

Width V mm 19 19 22 25 26

Order example: FL210D with Hex Setscrew FL210D with Square Head Setscrew and SW10

Installation

1. Slide FL onto beam flange and tighten setscrew to

recommended torque. Guideline: tighten the setscrew finger tight and then apply a further quarter turn (90°) with spanner. 2. Tighten the locknut (N) to the recommended torque. On tapered flanges the cup point setscrew has to grip on the inside of the flange.

56


Support Fixings

Type LC / Type SW - Swivel Unit

4

Type LC Malleable iron, bright zinc plated Setscrew Locknut

Main Body

Z N

T V

X U

W

Beam clamp with tapped holes in position X and Y to accept threaded rod or cable clips. For parallel or tapered flanges. Supplied with grade 8.8 cup point setscrew.

Y Installation see page 56 – type FL

Product Code

Thread X Y

LC06

M6

M6

LC08

M8

M8

Safe Working Load (4:1 Factor of Safety) Clamping Thickness Tensile / in Pos. X Tensile / in Pos. Y W kN kN mm 0.18 0.59 3 - 20 0.18

0.59

3 - 20

Setscrew Z M6 M6

Torque Setscrew Locknut Z N Nm Nm 4 4 4

4

T mm 25 25

Dimensions U Width V mm mm 36 21 36

21

Order example: LC06

Type SW - Swivel Unit

Type FL

High Grade Alloy Steel, bright zinc plated

Type Z10

U

R V Swivel unit for applications on inclined beams. Can be used with type FL or type Z10. Supplied complete with grade 8.8 M10 x 90 setscrew and nut. Product Code

Rod

SW10

M10

Safe Working Load (4:1 Factor of Safety) Max. Tensile Inclination kN 2.4 18°

Rotation 360°

Torque Nm 11

Dimensions With Bolt U R Width V mm mm mm 45 25 35

Order example: SW10


57

Type F3 / Type F3-BICC

Support Fixings

Type F3

Nut

4

Bolt

Malleable iron, hot dip galvanised Single Leg

Double Leg

Z

V W V

S

R

T

X

A two part flange clamp with large clamping range.The bolt can be substituted with either drop rod or J bolts. For parallel flanges only. Product Code with without Bolt Bolt F308NC F310NC F312NC F316NC F320NC

F308NB F310NB F312NB F316NB F320NB

Bolt 4.6 Z M8 M10 M12 M16 M20

Safe Working Load (4:1 Factor of Safety) Tensile kN 0.9 1.2 2.0 4.0 6.0

Clamping Thickness W mm 0 - 25 0 - 30 0 - 40 0 - 55 0 - 70

Torque Nm 6 20 39 93 177

S mm 19 22 29 36 44

T mm 6 7 9 12 15

Dimensions V mm 8 10 12 16 19

X mm 20 25 35 46 55

Width R mm 33 38 49 60 76

Order example: F308NC

Type F3-BICC Malleable iron, hot dip galvanised

Z T Y S

V1 W V2

X

Y A two part flange clamp which fixes claw type cable cleats directly beneath the flange. Supplied with grade 4.6 bolt. Product Code

Bolt 4.6 Z

F310BICCA

M10

Safe Working Load (4:1 Factor of Safety) Tensile kN 1.2

Clamping Thickness W mm 0 - 30

Thread Y M10

Torque Nm 20

T mm 6.5

Dimensions V2 X V1 mm mm mm 10 16 30

Width S mm 40

Order example: F310BICCA

58


Support Fixings

Type SH / Type HW/HC

4

Type SH Pre-galvanised strip Hanger Nut Y With special nut

A C

B With standard nut

The strap hanger carries FM approval for use in fire sprinkler installations. Supplied with or without a hanger nut. Product Code with without Nut Nut SH025N SH032N SH040N SH050N SH065N

SH025 SH032 SH040 SH050 SH065

Pipe Bore

Nuts Tapped

25 32 40 50 65

M8 or M10 M8 or M10 M8 or M10 M8 or M10 M8 or M10

Hole Ø Y mm 11 11 11 11 11

Product Code with without Nut Nut

Dimensions A B C mm mm mm 22 75 58 22 86 64 22 99 74 22 116 85 22 135 97

SH080N SH100N SH125N SH150N SH200N

SH080 SH100 SH125 SH150 SH200

Pipe Bore

Nuts Tapped

80 100 125 150 200

M8 or M10 M8 or M10 M12 M12 M16

Hole Ø Y mm 11 11 13 13 18

Dimensions A B C mm mm mm 22 159 114 22 219 161 27 247 177 27 284 200 24 373 261

Order example: SH025N with M10 hanger nut

Type HW/HC Malleable iron, bright zinc plated / hot dip galvanised

X Z

Hemispherical Washer

W2

R

W1 L

Y 10° Hemispherical Cup For vertical suspension on angled surface of up to 10° swing either side of the vertical. The hemispherical washer (HW) can be used without the cup. Loads are subject to applications, please contact Lindapter.

Product Code Hemispherical Washer Hemispherical Cup mm HW06 HW08 HW10 HC10 HW12 HC12 HW16 HC16 HW20 HC20 HW24

HC24

Hemispherical Washer X W1 mm mm 19 9 22 10 25 12 29 12 34 16 44 19 57

25

Hemispherical Cup Y W2 mm mm 32 12 35 12 41 16 54 19 67

25

Dimensions Hemispherical Washer & Cup R L mm 13 14 14 16 17 19 22 24 29

32

Order example: HC10 BZP


59

Support Fixings

Type Z10 / Type HCW30

4

Type Z10 Mild steel - bright zinc plated

A purlin clip to suit a large range of purlin sections. Can be used with type SW – Swivel Unit (see page 57) for use on inclined purlins.

Product Code Z10 Z10 Z10

Purlins

Rod

Kingspan Multibeam 2 & 3 Metsec Zeta

M10


M10 M10

0.1 - 0.2 0.15

Installation

Torque Nm 8 8 8

2.

1.

3.

Order example: Z10 Z10 with SW10

Type HCW30 Pre-galvanised strip

The purlin clip HCW30 is suitable for horizontal purlins. Can be used with type SW-Swivel Unit (see page 57) for use on inclined purlins.

Installation

Product Code HCW30

Purlins

Rod

Kingspan Multibeam 3

M10


Torque Nm 8

1.

2.

Order example: HCW30

60


Support Fixings

Type HCW31 / Type WF

4


A universal purlin clip suitable for multiple different applications. Product Code

Purlin

HCW31

Kingspan Multibeam 3


Order example: HCW31

Type WF Mild Steel, bright zinc plated

The Webfix – WF for a quick installation directly from the web of Zed purlins.

Product Code

Rod

WF10

M10

Safe Working Load (5:1 Factor of Safety) Max. Tensile Purlin Thickness kN mm 1.0 4

Hole Ø mm 18

Max. Distance X at Angle of 10º 20º 30º mm mm mm 103 94 74

Order example: WF10 Installation

Squeeze legs of WF together and push through hole until it snaps into place. 1.

Assemble with nut and ensure full thread capture. 2.

Hole position for angled purlins

X 1.

X

Canted Purlins: As the angle of backwards cant increases, the maximum allowable distance X (hole centre to bottom edge of purlin) must decrease.


Inclined Purlin: The WF adjusts to whatever angle is required. Hole position is not a limiting factor on product installation. 2.

61

Support Fixings

Type HCW34

4


A one-piece wrap around purlin hanger. The HCW34 can be used to suspend from canted purlins at up to 15° from the vertical.

H

Product Code HCW34/145 HCW34/175 HCW34/205 HCW34/235 HCW34/265

Purlin Kingspan Multibeam 3 Purlin Height Total Height H mm mm 145 210 175 240 205 270 235 300 265 330

Rod M10 M10 M10 M10 M10

Safe Working Load (3:1 Factor of Safety) Tensile kN 0.75 0.75 0.75 0.75 0.75

Order example: HCW34/145

Purlin Profiles

62

Multichannel Lipped C Section

Swagebeam

Multibeam

Zed Section

SFS C Section

UltraBEAM

Zeta Section

Ultrazed Section


Support Fixings


Type F3

1

Type WF

2

Type HCW31

4

Type FLS

3

Type HCW30 Type Z10

Type SH Type SH

4


63

Floor Fixings

5

Floor Fixings When designing the floor fixing range of products for chequer plate and both square and rectangular open bar grating Lindapter combined speed with ease of installation. None of the products require any site drilling and/or welding to be done and can easily be installed from above the flooring; this means no requirement for scaffold towers, access platforms or MEWP hire giving easier compliance with the onerous work at height regulations. Both the Floorfast® & Grate-Fast® are covered by Lloyds Register Type Approval in respect of their clamping force and resistance to loosening in areas subject to shock and vibration. Without a need for the issuing of hot work permits, they are particularly suited to applications where safety is of paramount importance such as in offshore and onshore petrochemical and processing industries although they are equally ideal for applications in all other industrial environments.

64


Type FF - Floorfast

Floor Fixings

®

Type FF - Floorfast

5

®

Malleable iron, Stainless Steel Grade 316, bright zinc plated / hot dip galvanised Unique stepped clamping face

Socket setscrew

90º D

20

2

t

t1

d Z 60

A - Nominal Clearance

The product consists of a malleable iron body casting with a countersunk socket screw; the eccentric stepped web of the casting allows it to lock under the steelwork providing full face contact when torque is applied. For thicker flanges packing pieces will be supplied. Lloyds’ Register Type Approval covers clamping force and vibration.

½ Flange Width 13 Position of hole centres: ½ flange width - ½ A + 13mm

Ferrule

Countersunk Product Code

FF08 FF10 FF12

Bolt Z

1)

M8 M10 M12

Floorplate Thickness t mm 4.5 - 12 5 - 12 6 - 12

Flange Thickness

Countersunk Ø for Bolt BZP HDG D mm

Hole Ø d mm

mm 3 - 15 3 - 15 3 - 15

9 11 13.5

17 21 25

Countersunk Depth for Bolt BZP HDG Torque t1 mm Nm

19 23

4 5 5.8

4 4.8

11 22 22

Hexagon Key mm 5 6 8

1) In hot dip galvanised (M10 and M12) a slotted countersunk screw is supplied.

Order example: FF12 HDG Installation

1.

2.

1. Pre-assemble Floorfast on underside of floorplate ®

3.

with stepped surface facing inwards. 2. Align castings with straight edge parallel to the edge of the plate and hand tighten. 3. Lay floorplate into position 4. Using a hexagon key release the countersunk screw one full turn. 5. Tighten down the countersunk socket screw.

4. 5.

Removal Using a hexagon key, give the Type FF one full anticlockwise turn to release connection from the flange.


65

Floor Fixings

Type GF - Grate-Fast®

5

Type GF - Grate-Fast® Body: Malleable iron, mechanical galvanised Top Hat: Mild Steel, mechanical galvanised

Top Hat Bracket

Socket Head Cap Screw

Cast Body

T

Z Grating fixing for rectangular open bar grating with cast main body giving superior clamping force. GF10 with wider top-hat bracket for different grating sizes. GF210 for use with 30mm width floor grating bars only. GF08 with stainless steel top-hat bracket for GRP grating. Lloyd’s Register Type Approval covers clamping force and vibration.

GF08 / GF10

GF210

W

D

D min X max X

Product Code

GF08 GF10 GF210

Bolt Z

Flange T mm 3 - 19 3 - 19 3 - 19

M8 M10 M10

Grating Bar Depth D mm 22 - 38 20 - 30 19 - 32

Grating Bar Width W mm 5 - 10 3-7 3 - 6.5

W

Bar Distance X mm 19 - 48 25 - 45 30

X Body Width

Torque

Hexagon Key

mm 16 20 20

Nm 5 11 11

mm 6 8 8

Order example: GF08 Installation

1. Position pre-assembled Grate-Fast® with body

between grating bars and nose pointing towards the steelwork. The arrows on the top hat bracket should also be pointing towards supporting steelwork and bracket itself resting on the bearing bars. 2. Slide Grate-Fast® towards steelwork until nose fits

under the beam flange. Where necessary adjust body/screw to approximate flange thickness/grating depth. 3. Tighten cap screw; the Grate-Fast® body will 1.

66

2.

3.

automatically rotate until it locks under the bearing bar, with the nose under the flange. Continue tightening to the recommended torque.


Floor Fixings

Type GF3030

5

Type GF3030 Spring Steel, Sheraplex

Grating clamp for instant installation requiring no tools. For parallel flanges only. Product Code

Grating Bar Depth mm

Grating Size mm

GF3030 GF3030 GF3030

30 30 30

30 x 30 30 x 30 30 x 30

Clamping Force at selected Flanges Clamping Flange Thickness Clamping Thickness Clamping Force / 1 Clamp mm mm N 8 13 18

38 43 48

340 530 680

Order example: GF3030 Installation

1.

2.

3.

1. Position the fixing with the grating bar located between the two tabs on the upper profile, facing towards the supporting steelwork. 2. Apply a downward force to the fixing, so that the lower leg passes through the grating. 3. Apply a downward force to the top of the fixing. The fixing then snaps in to place. If the lower profile contacts the steelwork web,

the GF3030 will automatically relocate itself. Removal

Using a screwdriver or lever, raise the back of the GF3030 into position shown in diagram 2. Place the lever between the steelwork and lower leg of the fixing and prise GF3030 away from steelwork. Deformed or damaged clamps cannot be re-used.


67

Appendix

Section Details

6

Advance UKB ®

Dimensions: BS4-1:2005

B

D

T

Designation Serial Size 1016 x 305 x 487 437 393 349 314 272 249 222 914 x 419 x 388 343 914 x 305 x 289 253 224 201 838 x 292 x 226 194 176 762 x 267 x 197 173 147 134 686 x 254 x 170 152 140 125 610 x 305 x 238 179 149 610 x 229 x 140 125 113 101 610 x 178 x 100 92 82 533 x 312 x 273 219 182 151 533 x 210 x 138 122 109 101 92 82 533 x 165 x 85 75 66

Mass kg/m 486.7 437.0 392.7 349.4 314.3 272.3 248.7 222.0 388.0 343.3 289.1 253.4 224.2 200.9 226.5 193.8 175.9 196.8 173.0 146.9 133.9 170.2 152.4 140.1 125.2 238.1 179.0 149.2 139.9 125.1 113.0 101.2 100.3 92.2 81.8 273.3 218.8 181.5 150.6 138.3 122.0 109.0 101.0 92.1 82.2 84.8 74.7 65.7

D mm 1036.3 1026.1 1015.9 1008.1 999.9 990.1 980.1 970.3 921.0 911.8 926.6 918.4 910.4 903.0 850.9 840.7 834.9 769.8 762.2 754.0 750.0 692.9 687.5 683.5 677.9 635.8 620.2 612.4 617.2 612.2 607.6 602.6 607.4 603.0 598.6 577.1 560.3 550.7 542.5 549.1 544.5 539.5 536.7 533.1 528.3 534.9 529.1 524.7

B mm 308.5 305.4 303.0 302.0 300.0 300.0 300.0 300.0 420.5 418.5 307.7 305.5 304.1 303.3 293.8 292.4 291.7 268.0 266.7 265.2 264.4 255.8 254.5 253.7 253.0 311.4 307.1 304.8 230.2 229.0 228.2 227.6 179.2 178.8 177.9 320.2 317.4 314.5 312.0 213.9 211.9 210.8 210.0 209.3 208.8 166.5 165.9 165.1

T mm 54.1 49.0 43.9 40.0 35.9 31.0 26.0 21.1 36.6 32.0 32.0 27.9 23.9 20.2 26.8 21.7 18.8 25.4 21.6 17.5 15.5 23.7 21.0 19.0 16.2 31.4 23.6 19.7 22.1 19.6 17.3 14.8 17.2 15.0 12.8 37.6 29.2 24.4 20.3 23.6 21.3 18.8 17.4 15.6 13.2 16.5 13.6 11.4

Designation Serial Size 457 x 191 x 161 133 106 98 89 82 74 67 457 x 152 x 82 74 67 60 52 406 x 178 x 85 74 67 60 54 406 x 140 x 53 46 39 356 x 171 x 67 57 51 45 356 x 127 x 39 33 305 x 165 x 54 46 40 305 x 127 x 48 42 37 305 x 102 x 33 28 25 254 x 146 x 43 37 31 254 x 102 x 28 25 22 203 x 133 x 30 25 203 x 102 x 23 178 x 102 x 19 152 x 89 x 16 127 x 76 x 13

Mass kg/m 161.4 133.3 105.8 98.3 89.3 82.0 74.3 67.1 82.1 74.2 67.2 59.8 52.3 85.3 74.2 67.1 60.1 54.1 53.3 46.0 39.0 67.1 57.0 51.0 45.0 39.1 33.1 54.0 46.1 40.3 48.1 41.9 37.0 32.8 28.2 24.8 43.0 37.0 31.1 28.3 25.2 22.0 30.0 25.1 23.1 19.0 16.0 13.0

D mm 492.0 480.6 469.2 467.2 463.4 460.0 457.0 453.4 465.8 462.0 458.0 454.6 449.8 417.2 412.8 409.4 406.4 402.6 406.6 403.2 398.0 363.4 358.0 355.0 351.4 353.4 349.0 310.4 306.6 303.4 311.0 307.2 304.4 312.7 308.7 305.1 259.6 256.0 251.4 260.4 257.2 254.0 206.8 203.2 203.2 177.8 152.4 127.0

B mm 199.4 196.7 194.0 192.8 191.9 191.3 190.4 189.9 155.3 154.4 153.8 152.9 152.4 181.9 179.5 178.8 177.9 177.7 143.3 142.2 141.8 173.2 172.2 171.5 171.1 126.0 125.4 166.9 165.7 165.0 125.3 124.3 123.4 102.4 101.8 101.6 147.3 146.4 146.1 102.2 101.9 101.6 133.9 133.2 101.8 101.2 88.7 76.0

T mm 32.0 26.3 20.6 19.6 17.7 16.0 14.5 12.7 18.9 17.0 15.0 13.3 10.9 18.2 16.0 14.3 12.8 10.9 12.9 11.2 8.6 15.7 13.0 11.5 9.7 10.7 8.5 13.7 11.8 10.2 14.0 12.1 10.7 10.8 8.8 7.0 12.7 10.9 8.6 10.0 8.4 6.8 9.6 7.8 9.3 7.9 7.7 7.6

Permission to reproduce extracts from BS4-1:2005 is granted by BSI. British Standards can be obtained in PDF or hard copy formats from the BSI online shop: www.bsigroup.com/shop or by contacting BSI Customer Services for hard copies only: Tel: +44 (0) 20 8996 9001, email: [email protected]

68


Appendix

Section Details

6

Advance UKPFC ®

Dimensions: BS4-1:2005 Designation Serial Size 430 x 100 x 64 380 x 100 x 54 300 x 100 x 46 300 x 90 x 41 260 x 90 x 35 260 x 75 x 28 230 x 90 x 32 230 x 75 x 26 200 x 90 x 30 200 x 75 x 23 180 x 90 x 26 180 x 75 x 20 150 x 90 x 24 150 x 75 x 18 125 x 65 x 15 100 x 50 x 10

Mass kg/m 64.4 54.0 45.5 41.4 34.8 27.6 32.2 25.7 29.7 23.4 26.1 20.3 23.9 17.9 14.8 10.2

D mm 430.0 380.0 300.0 300.0 260.0 260.0 230.0 230.0 200.0 200.0 180.0 180.0 150.0 150.0 125.0 100.0

B mm 100.0 100.0 100.0 90.0 90.0 75.0 90.0 75.0 90.0 75.0 90.0 75.0 90.0 75.0 65.0 50.0

T mm 19.0 17.5 16.5 15.5 14.0 12.0 14.0 12.5 14.0 12.5 12.5 10.5 12.0 10.0 9.5 8.5

D mm 474.6 455.6 436.6 419.0 406.4 393.6 381.0 374.6 368.2 362.0 355.6 365.3 352.5 339.9 327.1 320.5 314.5 307.9 289.1 276.3 266.7 260.3 254.1 241.4 235.0 228.6 222.2 215.8 209.6 206.2 203.2 170.2 166.0 161.8 157.6 152.4

B mm 424.0 418.5 412.2 407.0 403.0 399.0 394.8 374.7 372.6 370.5 368.6 322.2 318.4 314.5 311.2 309.2 307.4 305.3 265.2 261.3 258.8 256.3 254.6 213.9 212.1 210.3 209.1 206.4 205.8 204.3 203.6 157.4 155.9 154.4 152.9 152.2

T mm 77.0 67.5 58.0 49.2 42.9 36.5 30.2 27.0 23.8 20.7 17.5 44.1 37.7 31.4 25.0 21.7 18.7 15.4 31.7 25.3 20.5 17.3 14.2 30.1 26.9 23.7 20.5 17.3 14.2 12.5 11.0 15.7 13.6 11.5 9.4 6.8

B

D

T

Advance UKC ®

Dimensions: BS4-1:2005 Designation Serial Size 356 x 406 x 634 551 467 393 340 287 235 356 x 368 x 202 177 153 129 305 x 305 x 283 240 198 158 137 118 97 254 x 254 x 167 132 107 89 73 203 x 203 x 127 113 100 86 71 60 52 46 152x 152 x 51 44 37 30 23

Mass kg/m 633.9 551.0 467.0 393.0 339.9 287.1 235.1 201.9 177.0 152.9 129.0 282.9 240.0 198.1 158.1 136.9 117.9 96.9 167.1 132.0 107.1 88.9 73.1 127.5 133.5 99.6 86.1 71.0 60.0 52.0 46.1 51.2 44.0 37.0 30.0 23.0


B

D

T

Use of the Advance® name and range of sections by kind permission of Corus.

69

Appendix

General Enquiries

6

General Enquiries Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Department . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Town . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Postcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Web

www . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Your details will only be used internally and not disclosed to third parties.

Please send us:

Catalogue

CD

CPD Booking Form

The following samples: ............................................................................................................... ............................................................................................................... ............................................................................................................... Lindapter would like to keep you informed about the latest developments which could be valuable for you. ❍

Yes, I would like to be up-dated on new developments.

❍

I am particularly interested in the following:

............................................................................................................... ............................................................................................................... ❍

Please contact me. I have questions regarding:

............................................................................................................... ............................................................................................................... ...............................................................................................................

Fax: Email: 70

+44 (0) 1274 521130 [email protected] Tel: +44 (0) 1274 521444 www.lindapter.com

Appendix

Projects

Canary Wharf, London

Offshore Rig, North Sea

New Chinese National Theatre, Beijing

Wembley Stadium, London


6

St Pancras Station, London

BMW World, Munich

Viaduc de Millau, France

Tower Bridge, London 71

Lindapter Catalogue English 369

Recommend Documents