OS-5100RA, OS-5100RB The OS-5100
series is sophisticatedly designed, user friendly equipment. In order to enhance the convenience to the user, we have placed an encoder switch. In addition, whenever you activate function keys and switches, they will produce beeping sounds. Such feature could either be turned on or off according to user’s desire. To enable the users to operate this equipment much quicker, we have speed up the process of the cursor, trigger level, up/down position, and left/right position movement. The handle of this model is designed in a way that when it is folded underneath, the unit becomes level with the surface. This feature makes the unit stackable, enhancing the convenience of the user in certain situations.
C R T R E A D O U T O S C I L L O S C O P E
OS-5100RA
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com
OS-5100RB
FEATURES 100MHz Bandwidth,4CH HF / LF Reject Trigger Filters Auto Set Function Frequency Counter Function (only on Autoset)
Readout Cursor Function, 5ns / div Fast Sweep Rate CH1 Output 400V MAX. Input Voltage
4 Channels, 8 Traces (OS-5100RA) 2 Channels, 4 Traces (OS-5100RB)
Delayed Sweep Function Hold off Function Dual Time Base
w w w . e z d i g i t a l . c o .k r
20
CURSOR MEASUREMENTS The horizontal or vertical cursors are used to measure such parameters as waveform amplitute (V), and times ( t. 1/t). Sound on/off function with respect to other switches.
AUTO SETUP Enables the user to see signals at the most optimum measurement conditions with the display of the frequency measurement on the CRT.
MODE & SELECTION KEY Easy operation to select the desired function from the menu displayed on the CRT.
Vertical mode
Before
V
Horizontal display
After
1/T
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 FAX 781.665.0780 - TestEquipmentDepot.com
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com
Configuration and Useful Screen
Specifications
6-inch rectangular screen with internal graticule : 8 10div (1 div = 1cm), marking for measurement of rise time 2mm subdivisions along the central axis.
Accelerating Potential
+11.5kV approx.(Ref. cathode)
Phosphor
P31(standard)
Focussing
Possible (with auto - focus correction circuit)
Trace Rotation
provided
Scale Illumination
Variable
Intensity Control
provided
Input Signal
Positive going signal decreases intensity + 5Vp-p or more signal cases noticeable modulation at normal intensity settings.
Bandwidth
DC to 2MHz(-3dB)
Coupling
DC
Input Impedance
20k
Maximum Input Voltage
30V (DC+peak AC)
Bandwidth(-3dB)
DC coupled AC coupled
Modes
DC to 100MHz (2mV/DIV:DC to 50MHz) 10Hz to 100MHz (2mV/DIV:10Hz to 50MHz)
Accuracy
3%
Input Impedance
1M
Maximum Input Voltage
in parallel with approx.25pF
Direct ; 400V(DC+peak AC), with probe ; refer to probe specification DC - GND -AC
Rise Time
3.5ns or less (2mV/DIV : 7ns or less)
CH1 OUT
50mV/div into 50 : DC to 20MHz (-3dB)
Polarity Inversion
CH2 only
Signal Delay
Delay cable supplied
Display Modes
A,ALT,B,B TRIG D,X-Y 0.05 /div to 0.5s/div in 22 calibrated steps, 1-2-5 sequence. Uncalibrated continuous control between steps at least 1:2.5
Time Base A
CH1, CH2,DUAL,ADD,ALT,CHOP,CH2 INV.
2mV/div to 5V/div in 11 calibrated steps of a 1-2-5 squence. (FOR 0S-5100RA:CH3,CH4:0.1V/DIV,0.5V/DIV)Continuously variable between steps at least 1:2.5
Input Coupling
Hold-off Time
Variable with the holdoff control
Time Base B
0.05 /div to 50ms/div in 19 calibrated steps, 1-2-5 sequence.
Delayed Sweep Position adj.
1 div or less-10 div or more
Delay time Jitter
better than 1:10,000
Sweep Magnification
10 times (maximum sweep rate:5ns / div)
Accuracy
3%, 5% (0
Modes
to 40 ), addit ional error for magnifier
LINE,VERT,CH1,CH2,CH3,CH4
Coupling
LINE,VERT,CH1,CH2
AC,DC,HF REJ,LF REJ,TV-V,TV-H
Slope
+or -
Sensitivity and Frequency AUTO(30Hz or more), NORM
INT EXT
DC - 10MHz 0.5div 0.1Vp-p
10MHz - 100MHz 1.5div 0.3Vp-p
0.5div
3.0div
VERT TV-V, TV-H
at least 1 div or 1.0Vp-p
External Trigger (OS-5100RA CH3 or CH4) Input impedance
1M
Max. Input Voltage
X - axis
Y - axis
(in parallel with approx. 25 ) 400V(DC + peak AC)
(same as CH1 except for the following) Deflection factor : same as that of CH1 / Accuracy : 6%/ Frequency response : DC to 2MHz(-3dB) same as CH2
X - Y Phase Difference
3 or less (at DC to 100kHz)
Cursor Readout Function
V, T, 1/T
Auto setup
Enable
Frequency Counter Displays
Panel Setting Displays
Enable(only on Autosetup) AC/DC/GND, V-MODE,CH2 Invert,VOLTS / DIV, 10 MAG, H-DSP MODE,TIME/DIV,TRG COUPLING,TRG SOURCE.
Resolution
Probe Adjustment
1/25 div Approx. 1KHz 0.5Vp-p( 2%)square wave.duty ratio:~50%
Line Voltage
48~440Hz
Power Consumption
Max.50W
Weight
8kg
Size Temperature Humidity
90~250VAC(fuse:1A 250V)
Line Frequency
Accessories Supplied
2%
AUTO, NORM, TV, SINGLE
Source
typical
CH1, CH2, ADD, DUAL, ALT, CHOP ,CH2 INV. QUAD
Deflection Factor
- 30k
C R T R E A D O U T O S C I L L O S C O P E
328mm(W)
153mm (H)
392mm(L)
Temperature range for rated operation : +10 to +35 (+50 F to 95 F) Max, ambient operating temperature : 0 to + 40 (+32 F to +104 F) MAX, storage temperature : -20 + 70 (-4 F to + 158 F)
w w w . e z d i g i t a l . c o .k r
Range for rated operation:45% to 85% RH/Max.Ambient operating humidity:35% to 90% RH operator s manual 1
spare fuse 2
power cord 1
test probe (option)2
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 FAX 781.665.0780 - TestEquipmentDepot.com
21
