LEVEL III - ATA 50 Cargo & Accessory Compartments

A380 TECHNICAL TRAINING MANUAL MANUAL MAINTENANCE COURSE - T1 & T2 (RR / Metric) LEVEL III - ATA 50 Cargo & Accessory Compartments

This document must be used for training purposes only

Under no circumstances should this document be used as a reference

It will not be updated.

All rights reserved No part of this manual may be reproduced in any form, by photostat, microfilm, retrieval system, or any other means, without the prior written permission of AIRBUS S.A.S.

A380 TECHNICAL TRAINING MANUAL

LEVEL III - AT ATA 50 CARGO & ACCESSORY COMPARTMENTS COMPARTMENTS Theory System Cargo Loading System Des cription (3) . . . . . . . . . . . . . . . . . . . . . . . . 2 Cargo Loading System Maint enance (3) . . . . . . . . . . . . . . . . . . . . . . 16

0 T 0 T K 0 L 1 6 1 6 0 W 1 L

MAINTENANCE COURSE - T1 & T2 (RR / Metric) LEVEL III - ATA ATA 50 Cargo & Accessory Compartments

TABLE OF CONTENTS

Apr 21, 2006 Page 1


CARGO LOADING SYSTEM DESCRIPTION (3) Proximity Switches Proximity Switch - Door Sill Latch The Door Sill Latches (DSLs) are connected in series. All YZ-door sill latches have to be in the "down" position to let the power supply the Cargo Loading System (CLS). Then the cargo compartment door mechanism will be electrically isolated. All YZ-door sill latches have to be in the "up" pos ition to let the power supply the main CC door opening/closing operation. Then the CLS will be electrically isolated. As the Door Sill Latches are connected in series, if at least one of them differs from the other ones, both CLS and cargo door will be electrically isolated.

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L


CARGO LOADING SYSTEM DESCRIPTION (3)

Apr 18, 2006 Page 2


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

PROXIMITY PRO XIMITY SWITCHES - PROXIMITY SWITCH - DOOR SILL LA LATCH TCH 1

W L



Apr 18, 2006 Page 3


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

PROXIMITY PRO XIMITY SWITCHES - PROXIMITY SWITCH - DOOR SILL LA LATCH TCH 1

W L



Apr 18, 2006 Page 4


This Page Intentionally Left Blank

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 5


CARGO LOADING SYSTEM DESCRIPTION (3) Proximity Switches (continued) Proximity Switches - Conveyance The proximity switches - conveyance indicate if the latch is in the lifted or lowered position. If the latch is lifted, the proximity switch will signal the relevant control boxes: Compartment Control Box (CCB) or Sector Control Box (SCB), to cut the power supply to specific Power Drive Units (PDUs) where Unit Load Device (ULD) transportation movements are no longer required.

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 6


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

PROXIMITY PRO XIMITY SWITCHES - PROXIMITY SWITCHES - CONVEYANCE 1

W L



Apr 18, 2006 Page 7


CARGO LOADING SYSTEM DESCRIPTION (3) Door-area Door-area Control Box (DCB) Interfaces The DCB is linked with the other control boxes and the Doo rs and Slides Management Control Unit (DSMCU) via CAN bus. The DCB receives feedback from the door sill latch proximity switches via a discrete signal and sends a signal to the Outside Control Panel (OCP) via an analog signal. The DCB has also a link with the Central Maintenance System (CMS) via a bi-directional ARINC 429 link with the Secured Communication Interfaces (SCIs).

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 8


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

DOOR-AREA CONTROL BOX (DCB) INTERFA INTERFACES CES 1

W L



Apr 18, 2006 Page 9


CARGO LOADING SYSTEM DESCRIPTION (3) Compartment Control Box (CCB) Interfaces The Compartment Control Box (CCB) is linked with the other control boxes via CAN bus. The CCB receives discrete signals from the Inside Control Panel (ICP) and the OCP. Analog data is exchanged with the OCP. OCP. The CCB receives feedback from the ball-mat area proximity switches via a discrete signal and sends discrete commands to the transverse PDUs.

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 10


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

COMPARTMENT CONTROL BOX (CCB) INTERFACES 1

W L



Apr 18, 2006 Page 11


CARGO LOADING SYSTEM DESCRIPTION (3) Sector Control Box (SCB) Interfaces The SCBs are linked with the other control boxes via a CAN bus. The SCBs receive discrete signals from the proximity switches and send discrete commands to the PDUs.

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 12


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

SECTOR CONTROL BOX (SCB) INTERFACES 1

W L



Apr 18, 2006 Page 13


CARGO LOADING SYSTEM DESCRIPTION (3) Electrically Powered Pallet Turning and Extended T-Shape CLS in AFT CC This option is used for the loading of three additional pallets (88 in / 96 in x 125.0 in lengthwise position in T-shape area) in the AFT cargo compartment. These pallets will be turned in the ball mat area. Additional components will be installed in the T-shape area of the cargo compartment. The Pallet Turning Unit (PTU) is basically the same as the SCB and additionally monitors the pallet turning function. It is integrated in the floor panels and replaces one SCB.

1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L



Apr 18, 2006 Page 14


1 0 0 0 0 0 S L C 1 D 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

ELECTRICALLY POWERED PALLET PALLET TURNING AND EXTENDED T-SHAPE CLS IN AFT CC 1

W L



Apr 18, 2006 Page 15


CARGO LOADING SYSTEM MAINTENANCE (3) Tests Text of step 1 of topic page 1

OMS Interactive Tests Overview The Cargo Loading System provides the following interactive tests: - FWD BITE memory dump, - AFT BITE memory dump. These tests are launched from the OMS HMI (using the OMT, OIT or PMAT).

1 0 0 0 T IN A M 1 Y 0 5 M L 0 T 0 T K 0 L 1 6 1 6 0 W 1 L


CARGO LO LOADING SY SYSTEM MAINTENANCE (3 (3)

Apr 1 18 8, 20 2006 Page 16


1 0 0 0 T IN A M 1 Y 0 5 M L 0 T 0 T K 0 L 1 0

6

1

6

TESTS - OMS INTERACTIVE TESTS OVER OVERVIEW VIEW 1

W L


CARGO LO LOADING SY SYSTEM MAINTENANCE (3 (3)

Apr 1 18 8, 20 2006 Page 17

AIRBUS S.A.S. 31707 BLAGNAC cedex, FRANCE STM REFERENCE L1W06161 APRIL 2006 PRINTED IN FRANCE AIRBUS S.A.S. 2006 ALL RIGHTS RESERVED AN EADS JOINT COMPANY WITH BAE SYSTEMS

LEVEL III - ATA 50 Cargo & Accessory Compartments

Recommend Documents